diff --git a/bsp/lpc1114/application.c b/bsp/lpc1114/application.c new file mode 100644 index 0000000000..4ef7c37b03 --- /dev/null +++ b/bsp/lpc1114/application.c @@ -0,0 +1,26 @@ +/* + * File : app.c + * This file is part of RT-Thread RTOS + * COPYRIGHT (C) 2006, RT-Thread Development Team + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.rt-thread.org/license/LICENSE + * + * Change Logs: + * Date Author Notes + * 2010-01-25 Bernard first version + */ + +/** + * @addtogroup LPC1100 + */ +/*@{*/ +#include + +int rt_application_init() +{ + return 0; +} + +/*@}*/ diff --git a/bsp/lpc1114/board.c b/bsp/lpc1114/board.c new file mode 100644 index 0000000000..6ccd875d1a --- /dev/null +++ b/bsp/lpc1114/board.c @@ -0,0 +1,65 @@ +/* + * File : board.c + * This file is part of RT-Thread RTOS + * COPYRIGHT (C) 2006, RT-Thread Develop Team + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.rt-thread.org/license/LICENSE + * + * Change Logs: + * Date Author Notes + * 2010-01-25 Bernard first version + */ + +#include +#include + +#include "board.h" +#include "uart.h" + +#include +#include + +/** + * @addtogroup LPC1100 + */ +/*@{*/ + +/** + * This is the timer interrupt service routine. + */ +void rt_hw_timer_handler() +{ + /* enter interrupt */ + rt_interrupt_enter(); + + rt_tick_increase(); + + /* leave interrupt */ + rt_interrupt_leave(); +} + +/** + * This function will initial sam7s64 board. + */ +void rt_hw_board_init() +{ + SystemInit(); + + /* init systick */ + SysTick_Config(0x0007A11F); + + /* set pend exception priority */ + NVIC_SetPriority(PendSV_IRQn, (1<<__NVIC_PRIO_BITS) - 1); + +#ifdef RT_USING_UART + /* init hardware UART device */ + rt_hw_uart_init(); +#endif +#ifdef RT_USING_CONSOLE + /* set console device */ + rt_console_set_device("uart"); +#endif +} +/*@}*/ diff --git a/bsp/lpc1114/board.h b/bsp/lpc1114/board.h new file mode 100644 index 0000000000..1cabc8e886 --- /dev/null +++ b/bsp/lpc1114/board.h @@ -0,0 +1,20 @@ +/* + * File : board.h + * This file is part of RT-Thread RTOS + * COPYRIGHT (C) 2006, RT-Thread Develop Team + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.rt-thread.org/license/LICENSE + * + * Change Logs: + * Date Author Notes + * 2010-01-25 Bernard first version + */ + +#ifndef __BOARD_H__ +#define __BOARD_H__ + +void rt_hw_board_init(void); + +#endif diff --git a/bsp/lpc1114/project.uvopt b/bsp/lpc1114/project.uvopt new file mode 100644 index 0000000000..642c736c20 --- /dev/null +++ b/bsp/lpc1114/project.uvopt @@ -0,0 +1,1947 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + + + + 0 + 0 + + + + RT-Thread LPC1100 + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 0 + + SARMCM3.DLL + + DARMCM1.DLL + + SARMCM3.DLL + + TARMCM1.DLL + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 0 + 0 + 11 + + + + + + + + + + + ..\TKScope\UL2ARM_TKSCP_DRV_ARM_for_AGDI.dll + + + + 0 + DLGDARM + (1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0) + + + 0 + DLGTARM + (1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0) + + + 0 + ARMDBGFLAGS + -T0 + + + 0 + UL2ARM_TKSCP_DRV_ARM_for_AGDI + -OP1798 -EP3276800 -VD131248 -IC0 -LM0 -IF0 -EF0 -VL0 -UT0 -UE0 -EO000 -EO0132768 -EO020 -EO030 -EO040 -EO050 -EO060 -EO070 -EO08268435456 -EO098160 -EO1025 -EO110 -EO120 -EO130 -EO143 -EO15100000 -EO16800000 -EO1735500000 -EO18100000 -EO191200000 -EO2050 -EO21500 -EO221870594 -EO230 -FF0"configuration\LPC11xx_IAP_32.flm" -MM0V2T0S0E65535 -MM8V2T0S0E65535 + + + + + 0 + 0 + 91 + 0 +
5202
+ 0 + 0 + 0 + 0 + 1 + context_rvds.S + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + Startup + 1 + 0 + 0 + + 1 + 1 + 1 + 0 + 0 + 22 + 0 + 7 + 25 + 0 + .\board.c + board.c + + + 1 + 2 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + .\startup.c + startup.c + + + 1 + 3 + 1 + 0 + 0 + 3 + 0 + 0 + 0 + 0 + .\application.c + application.c + + + 1 + 4 + 5 + 0 + 0 + 0 + 0 + 55 + 59 + 0 + .\rtconfig.h + rtconfig.h + + + 1 + 5 + 5 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + .\board.h + board.h + + + 1 + 6 + 1 + 0 + 0 + 20 + 0 + 1 + 17 + 0 + .\uart.c + uart.c + + + + + Kernel + 0 + 0 + 0 + + 2 + 7 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\clock.c + clock.c + + + 2 + 8 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + ..\..\src\device.c + device.c + + + 2 + 9 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\idle.c + idle.c + + + 2 + 10 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\irq.c + irq.c + + + 2 + 11 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + ..\..\src\kservice.c + kservice.c + + + 2 + 12 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\mempool.c + mempool.c + + + 2 + 13 + 1 + 0 + 0 + 21 + 0 + 0 + 0 + 0 + ..\..\src\object.c + object.c + + + 2 + 14 + 1 + 0 + 0 + 10 + 0 + 10 + 34 + 0 + ..\..\src\scheduler.c + scheduler.c + + + 2 + 15 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\slab.c + slab.c + + + 2 + 16 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\timer.c + timer.c + + + 2 + 17 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\thread.c + thread.c + + + 2 + 18 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\mem.c + mem.c + + + 2 + 19 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\ipc.c + ipc.c + + + + + LPC1100 + 0 + 0 + 0 + + 3 + 20 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\lpc1100\cpu.c + cpu.c + + + 3 + 21 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\lpc1100\fault.c + fault.c + + + 3 + 22 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\lpc1100\interrupt.c + interrupt.c + + + 3 + 23 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\lpc1100\stack.c + stack.c + + + 3 + 24 + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\lpc1100\context_rvds.S + context_rvds.S + + + 3 + 25 + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\lpc1100\fault_rvds.S + fault_rvds.S + + + 3 + 26 + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\lpc1100\start_rvds.s + start_rvds.s + + + + + CMSIS + 1 + 0 + 0 + + 4 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\lpc1100\CMSIS\core_cm0.c + core_cm0.c + + + 4 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\lpc1100\CMSIS\system_LPC11xx.c + system_LPC11xx.c + + + + + Default + 1 + Build + 0 + + Default + 1 + + 35824 + 1 + Logic Analyzer + 0 + + 0 + + 1 + 6 + 0 + 0 + 0 + 0 + 210 + 600 + 0 + 0 + 250 + 600 + 1 + 0 + 0 + 0 + + + 59392 + 2 + File + 0 + + 0 + + 1 + 2 + 3 + 0 + 24 + 0 + 50 + 893 + 0 + 0 + 0 + 0 + 100 + 0 + 1 + 0 + + + 59398 + 3 + Build + 0 + + 0 + + 1 + 2 + 3 + 0 + 50 + 0 + 76 + 384 + 0 + 0 + 0 + 0 + 100 + 0 + 0 + 0 + + + 59399 + 4 + Debug + 0 + + 0 + + 1 + 2 + 3 + 0 + 50 + 0 + 76 + 626 + 0 + 0 + 0 + 0 + 100 + 0 + 1 + 0 + + + 197 + 5 + Build Output + 0 + + 0 + + 1 + 2 + 4 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 250 + 600 + 100 + 0 + 0 + 0 + + + 198 + 6 + Command + 197 + + 0 + + 1 + 4 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 250 + 600 + 100 + 0 + 0 + 0 + + + 199 + 7 + Find in Files + 198 + + 0 + + 1 + 4 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 250 + 600 + 100 + 0 + 0 + 0 + + + 38007 + 8 + Browse + 199 + + 0 + + 1 + 4 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 250 + 600 + 100 + 0 + 0 + 0 + + + 1939 + 9 + UART #1 + 38007 + + 0 + + 1 + 4 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 250 + 600 + 100 + 1 + 1 + 0 + + + 1940 + 10 + UART #2 + 1939 + + 0 + + 1 + 4 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 250 + 600 + 100 + 0 + 0 + 0 + + + 1941 + 11 + UART #3 + 1940 + + 0 + + 1 + 4 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 250 + 600 + 100 + 0 + 0 + 0 + + + 1942 + 12 + UART #4 + 1941 + + 0 + + 1 + 4 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 250 + 600 + 100 + 0 + 0 + 0 + + + 1944 + 13 + Call Stack + 197 + + 197 + + 1 + 2 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 600 + 250 + 0 + 0 + 0 + 0 + + + 1507 + 14 + Call Stack + 1944 + + 197 + + 1 + 4 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 600 + 250 + 0 + 0 + 0 + 0 + + + 1935 + 15 + Locals + 1507 + + 197 + + 1 + 4 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 600 + 250 + 0 + 0 + 0 + 0 + + + 1936 + 16 + Watch 1 + 1935 + + 197 + + 1 + 4 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 600 + 250 + 0 + 0 + 0 + 0 + + + 1937 + 17 + Watch 2 + 1936 + + 197 + + 1 + 4 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 600 + 250 + 0 + 0 + 0 + 0 + + + 1465 + 18 + Memory 1 + 1937 + + 197 + + 1 + 4 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 600 + 250 + 0 + 0 + 0 + 0 + + + 1466 + 19 + Memory 2 + 1465 + + 197 + + 1 + 4 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 600 + 250 + 0 + 0 + 0 + 0 + + + 1467 + 20 + Memory 3 + 1466 + + 197 + + 1 + 4 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 600 + 250 + 0 + 0 + 0 + 0 + + + 1468 + 21 + Memory 4 + 1467 + + 197 + + 1 + 4 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 600 + 250 + 0 + 0 + 0 + 0 + + + 1506 + 22 + Symbols + 1468 + + 197 + + 1 + 4 + 2 + 0 + 559 + 0 + 659 + 1024 + 0 + 0 + 600 + 250 + 0 + 0 + 0 + 0 + + + 1005 + 23 + Project + 0 + + 0 + + 1 + 2 + 1 + 0 + 76 + 0 + 555 + 210 + 0 + 0 + 600 + 250 + 100 + 0 + 1 + 0 + + + 109 + 24 + Books + 1005 + + 0 + + 1 + 4 + 2 + 0 + 76 + 0 + 555 + 210 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 195 + 25 + Functions + 109 + + 0 + + 1 + 4 + 2 + 0 + 76 + 0 + 555 + 210 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 196 + 26 + Templates + 195 + + 0 + + 1 + 4 + 2 + 0 + 76 + 0 + 555 + 210 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 38003 + 27 + Registers + 196 + + 0 + + 1 + 4 + 2 + 0 + 76 + 0 + 555 + 210 + 0 + 0 + 600 + 250 + 100 + 1 + 1 + 0 + + + 35885 + 28 + not set + 0 + + 0 + + 1 + 2 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35886 + 29 + not set + 35885 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35887 + 30 + not set + 35886 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35888 + 31 + not set + 35887 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35889 + 32 + not set + 35888 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35890 + 33 + not set + 35889 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35891 + 34 + not set + 35890 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35892 + 35 + not set + 35891 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35893 + 36 + not set + 35892 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35894 + 37 + not set + 35893 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35895 + 38 + not set + 35894 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35896 + 39 + not set + 35895 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35897 + 40 + not set + 35896 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35898 + 41 + not set + 35897 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35899 + 42 + not set + 35898 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35900 + 43 + not set + 35899 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35901 + 44 + not set + 35900 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35902 + 45 + not set + 35901 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35903 + 46 + not set + 35902 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35904 + 47 + not set + 35903 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 35905 + 48 + not set + 35904 + + 0 + + 1 + 4 + 2 + 0 + 76 + 814 + 555 + 1024 + 0 + 0 + 600 + 250 + 100 + 0 + 0 + 0 + + + 203 + 49 + Disassembly + 0 + + 0 + + 1 + 2 + 3 + 0 + 0 + 0 + 210 + 810 + 0 + 0 + 250 + 600 + 100 + 0 + 0 + 0 + + + 1913 + 50 + Instruction Trace + 203 + + 0 + + 1 + 4 + 2 + 0 + 0 + 0 + 210 + 810 + 0 + 0 + 250 + 600 + 100 + 0 + 0 + 0 + + + 343 + 51 + Performance Analyzer + 1913 + + 0 + + 1 + 4 + 2 + 0 + 0 + 0 + 210 + 810 + 0 + 0 + 250 + 600 + 100 + 0 + 0 + 0 + + + 204 + 52 + Performance Analyzer + 343 + + 0 + + 1 + 4 + 2 + 0 + 0 + 0 + 210 + 810 + 0 + 0 + 250 + 600 + 100 + 0 + 0 + 0 + + + 346 + 53 + Code Coverage + 204 + + 0 + + 1 + 4 + 2 + 0 + 0 + 0 + 210 + 810 + 0 + 0 + 250 + 600 + 100 + 0 + 0 + 0 + + + + + diff --git a/bsp/lpc1114/project.uvproj b/bsp/lpc1114/project.uvproj new file mode 100644 index 0000000000..c3544a9a19 --- /dev/null +++ b/bsp/lpc1114/project.uvproj @@ -0,0 +1,549 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + + RT-Thread LPC1100 + 0x4 + ARM-ADS + + + LPC1114x301 + NXP (founded by Philips) + IRAM(0x10000000-0x10001FFF) IROM(0-0x7FFF) CLOCK(50000000) CPUTYPE("Cortex-M0") + + "STARTUP\NXP\LPC11xx\startup_LPC11xx.s" ("NXP LPC11xx Startup Code") + + 5063 + LPC11xx.h + + + + + + + + + + 0 + + + + NXP\LPC11xx\ + NXP\LPC11xx\ + + 0 + 0 + 0 + 0 + 1 + + .\obj\ + rtthread-lpc1100 + 1 + 0 + 0 + 1 + 1 + .\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + + + SARMCM3.DLL + + DARMCM1.DLL + + SARMCM3.DLL + + TARMCM1.DLL + + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + + 0 + 11 + + + + + + + + + + + + + + ..\TKScope\UL2ARM_TKSCP_DRV_ARM_for_AGDI.dll + + + + + 1 + 0 + 0 + 0 + 1 + 4103 + + ..\TKScope\UL2ARM_TKSCP_DRV_ARM_for_AGDI.dll + "" () + + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M0" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 8 + 1 + 0 + 0 + 3 + 3 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x10000000 + 0x2000 + + + 1 + 0x0 + 0x8000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x8000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x10000000 + 0x2000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + .;..\..\include;..\..\libcpu\arm\lpc1100 + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x00000000 + 0x10000000 + + + + + + + + + + + + Startup + + + board.c + 1 + .\board.c + + + startup.c + 1 + .\startup.c + + + application.c + 1 + .\application.c + + + rtconfig.h + 5 + .\rtconfig.h + + + board.h + 5 + .\board.h + + + uart.c + 1 + .\uart.c + + + + + Kernel + + + clock.c + 1 + ..\..\src\clock.c + + + device.c + 1 + ..\..\src\device.c + + + idle.c + 1 + ..\..\src\idle.c + + + irq.c + 1 + ..\..\src\irq.c + + + kservice.c + 1 + ..\..\src\kservice.c + + + mempool.c + 1 + ..\..\src\mempool.c + + + object.c + 1 + ..\..\src\object.c + + + scheduler.c + 1 + ..\..\src\scheduler.c + + + slab.c + 1 + ..\..\src\slab.c + + + timer.c + 1 + ..\..\src\timer.c + + + thread.c + 1 + ..\..\src\thread.c + + + mem.c + 1 + ..\..\src\mem.c + + + ipc.c + 1 + ..\..\src\ipc.c + + + + + LPC1100 + + + cpu.c + 1 + ..\..\libcpu\arm\lpc1100\cpu.c + + + fault.c + 1 + ..\..\libcpu\arm\lpc1100\fault.c + + + interrupt.c + 1 + ..\..\libcpu\arm\lpc1100\interrupt.c + + + stack.c + 1 + ..\..\libcpu\arm\lpc1100\stack.c + + + context_rvds.S + 2 + ..\..\libcpu\arm\lpc1100\context_rvds.S + + + fault_rvds.S + 2 + ..\..\libcpu\arm\lpc1100\fault_rvds.S + + + start_rvds.s + 2 + ..\..\libcpu\arm\lpc1100\start_rvds.s + + + + + CMSIS + + + core_cm0.c + 1 + ..\..\libcpu\arm\lpc1100\CMSIS\core_cm0.c + + + system_LPC11xx.c + 1 + ..\..\libcpu\arm\lpc1100\CMSIS\system_LPC11xx.c + + + + + + + + diff --git a/bsp/lpc1114/rtconfig.h b/bsp/lpc1114/rtconfig.h new file mode 100644 index 0000000000..53fe7f9973 --- /dev/null +++ b/bsp/lpc1114/rtconfig.h @@ -0,0 +1,67 @@ +/* RT-Thread config file */ +#ifndef __RTTHREAD_CFG_H__ +#define __RTTHREAD_CFG_H__ + +/* RT_NAME_MAX*/ +#define RT_NAME_MAX 4 + +/* RT_ALIGN_SIZE*/ +#define RT_ALIGN_SIZE 4 + +/* PRIORITY_MAX*/ +#define RT_THREAD_PRIORITY_MAX 8 + +/* Tick per Second*/ +#define RT_TICK_PER_SECOND 100 + +/* SECTION: RT_DEBUG */ +/* Thread Debug*/ +/* #define RT_THREAD_DEBUG */ + +/* Using Hook*/ +/* #define RT_USING_HOOK */ + +/* SECTION: IPC */ +/* Using Semaphore*/ +#define RT_USING_SEMAPHORE + +/* Using Mutex*/ +/* #define RT_USING_MUTEX */ + +/* Using Event*/ +/* #define RT_USING_EVENT */ + +/* Using MailBox*/ +#define RT_USING_MAILBOX + +/* Using Message Queue*/ +/* #define RT_USING_MESSAGEQUEUE */ + +/* SECTION: Memory Management */ +/* Using Memory Pool Management*/ +/* #define RT_USING_MEMPOOL */ + +/* Using Dynamic Heap Management*/ +/* #define RT_USING_HEAP */ + +/* Using Small MM*/ +#define RT_USING_SMALL_MEM +#define RT_USING_TINY_SIZE + +/* SECTION: Device System */ +/* Using Device System */ +#define RT_USING_DEVICE + +/* buffer size for UART reception */ +#define RT_UART_RX_BUFFER_SIZE 64 + +/* Using UART */ +#define RT_USING_UART + +/* SECTION: Console options */ +/* use console for rt_kprintf */ +#define RT_USING_CONSOLE +/* the buffer size of console */ +#define RT_CONSOLEBUF_SIZE 80 + +#endif diff --git a/bsp/lpc1114/startup.c b/bsp/lpc1114/startup.c new file mode 100644 index 0000000000..d4c5a3fb84 --- /dev/null +++ b/bsp/lpc1114/startup.c @@ -0,0 +1,116 @@ +/* + * File : startup.c + * This file is part of RT-Thread RTOS + * COPYRIGHT (C) 2006, RT-Thread Develop Team + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.rt-thread.org/license/LICENSE + * + * Change Logs: + * Date Author Notes + * 2010-01-25 Bernard first version + */ + +#include +#include + +#include "board.h" +#ifdef RT_USING_UART +#include "uart.h" +#endif + +/** + * @addtogroup sam7s + */ + +/*@{*/ +#ifdef __CC_ARM +extern int Image$$RW_IRAM1$$ZI$$Limit; +#endif + +#ifdef __GNUC__ +extern unsigned char __bss_start; +extern unsigned char __bss_end; +#endif + +extern void rt_hw_interrupt_init(void); +extern int rt_application_init(void); +#ifdef RT_USING_DEVICE +extern rt_err_t rt_hw_serial_init(void); +#endif + +/** + * This function will startup RT-Thread RTOS. + */ +void rtthread_startup(void) +{ + /* init kernel object */ + rt_system_object_init(); + + /* init board */ + rt_hw_board_init(); + rt_show_version(); + + /* init tick */ + rt_system_tick_init(); + + /* init timer system */ + rt_system_timer_init(); + +#ifdef RT_USING_HEAP +#ifdef __CC_ARM + rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)0x204000); +#elif __ICCARM__ + rt_system_heap_init(__segment_end("HEAP"), (void*)0x204000); +#else + rt_system_heap_init((void*)&__bss_end, (void*)0x204000); +#endif +#endif + + /* init scheduler system */ + rt_system_scheduler_init(); + +#ifdef RT_USING_HOOK /* if the hook is used */ + /* set idle thread hook */ + rt_thread_idle_sethook(rt_hw_led_flash); +#endif + +#ifdef RT_USING_DEVICE + /* init all device */ + rt_device_init_all(); +#endif + + /* init application */ + rt_application_init(); + +#ifdef RT_USING_FINSH + /* init finsh */ + finsh_system_init(); + finsh_set_device("uart1"); +#endif + + /* init idle thread */ + rt_thread_idle_init(); + + /* start scheduler */ + rt_system_scheduler_start(); + + /* never reach here */ + return ; +} + +int main (void) +{ + rt_uint32_t UNUSED level; + + /* disable interrupt first */ + level = rt_hw_interrupt_disable(); + + /* invoke rtthread_startup */ + rtthread_startup(); + + return 0; +} + +/*@}*/ diff --git a/bsp/lpc1114/uart.c b/bsp/lpc1114/uart.c new file mode 100644 index 0000000000..da1d3b2ec7 --- /dev/null +++ b/bsp/lpc1114/uart.c @@ -0,0 +1,263 @@ +#include +#include +#include + +#define IER_RBR 0x01 +#define IER_THRE 0x02 +#define IER_RLS 0x04 + +#define IIR_PEND 0x01 +#define IIR_RLS 0x03 +#define IIR_RDA 0x02 +#define IIR_CTI 0x06 +#define IIR_THRE 0x01 + +#define LSR_RDR 0x01 +#define LSR_OE 0x02 +#define LSR_PE 0x04 +#define LSR_FE 0x08 +#define LSR_BI 0x10 +#define LSR_THRE 0x20 +#define LSR_TEMT 0x40 +#define LSR_RXFE 0x80 + +/** + * @addtogroup LPC11xx + */ + +/*@{*/ +#if defined(RT_USING_UART) && defined(RT_USING_DEVICE) + +#define UART_BAUDRATE 115200 +struct rt_uart_lpc +{ + struct rt_device parent; + + /* buffer for reception */ + rt_uint8_t read_index, save_index; + rt_uint8_t rx_buffer[RT_UART_RX_BUFFER_SIZE]; +}uart_device; + +void UART_IRQHandler(void) +{ + rt_ubase_t level, iir; + struct rt_uart_lpc* uart = &uart_device; + + /* read IIR and clear it */ + iir = LPC_UART->IIR; + + iir >>= 1; /* skip pending bit in IIR */ + iir &= 0x07; /* check bit 1~3, interrupt identification */ + + if (iir == IIR_RDA) /* Receive Data Available */ + { + /* Receive Data Available */ + uart->rx_buffer[uart->save_index] = LPC_UART->RBR; + + level = rt_hw_interrupt_disable(); + uart->save_index ++; + if (uart->save_index >= RT_UART_RX_BUFFER_SIZE) + uart->save_index = 0; + rt_hw_interrupt_enable(level); + + /* invoke callback */ + if(uart->parent.rx_indicate != RT_NULL) + { + rt_size_t length; + if (uart->read_index > uart->save_index) + length = RT_UART_RX_BUFFER_SIZE - uart->read_index + uart->save_index; + else + length = uart->save_index - uart->read_index; + + uart->parent.rx_indicate(&uart->parent, length); + } + } + + return; +} + +static rt_err_t rt_uart_init (rt_device_t dev) +{ + rt_uint32_t Fdiv; + rt_uint32_t regVal; + + /* Init UART Hardware */ + LPC_IOCON->PIO1_6 &= ~0x07; /* UART I/O config */ + LPC_IOCON->PIO1_6 |= 0x01; /* UART RXD */ + LPC_IOCON->PIO1_7 &= ~0x07; + LPC_IOCON->PIO1_7 |= 0x01; /* UART TXD */ + + /* Enable UART clock */ + LPC_SYSCON->SYSAHBCLKCTRL |= (1<<12); + LPC_SYSCON->UARTCLKDIV = 0x1; /* divided by 1 */ + + LPC_UART->LCR = 0x83; /* 8 bits, no Parity, 1 Stop bit */ + regVal = LPC_SYSCON->UARTCLKDIV; + + /* set baudrate */ + regVal = LPC_SYSCON->UARTCLKDIV; + Fdiv = (((SystemCoreClock/LPC_SYSCON->SYSAHBCLKDIV)/regVal)/16)/UART_BAUDRATE ; + + LPC_UART->DLM = Fdiv / 256; + LPC_UART->DLL = Fdiv % 256; + LPC_UART->LCR = 0x03; /* DLAB = 0 */ + LPC_UART->FCR = 0x07; /* Enable and reset TX and RX FIFO. */ + + /* Read to clear the line status. */ + regVal = LPC_UART->LSR; + + /* Ensure a clean start, no data in either TX or RX FIFO. */ + while (( LPC_UART->LSR & (LSR_THRE|LSR_TEMT)) != (LSR_THRE|LSR_TEMT) ); + while ( LPC_UART->LSR & LSR_RDR ) + { + regVal = LPC_UART->RBR; /* Dump data from RX FIFO */ + } + + LPC_UART->IER = IER_RBR | IER_THRE | IER_RLS; /* Enable UART interrupt */ + + return RT_EOK; +} + +static rt_err_t rt_uart_open(rt_device_t dev, rt_uint16_t oflag) +{ + RT_ASSERT(dev != RT_NULL); + if (dev->flag & RT_DEVICE_FLAG_INT_RX) + { + /* Enable the UART Interrupt */ + NVIC_EnableIRQ(UART_IRQn); + } + + return RT_EOK; +} + +static rt_err_t rt_uart_close(rt_device_t dev) +{ + RT_ASSERT(dev != RT_NULL); + if (dev->flag & RT_DEVICE_FLAG_INT_RX) + { + /* Disable the UART Interrupt */ + NVIC_DisableIRQ(UART_IRQn); + } + + return RT_EOK; +} + +static rt_size_t rt_uart_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size) +{ + rt_uint8_t* ptr; + struct rt_uart_lpc *uart = (struct rt_uart_lpc*)dev; + RT_ASSERT(uart != RT_NULL); + + /* point to buffer */ + ptr = (rt_uint8_t*) buffer; + if (dev->flag & RT_DEVICE_FLAG_INT_RX) + { + while (size) + { + /* interrupt receive */ + rt_base_t level; + + /* disable interrupt */ + level = rt_hw_interrupt_disable(); + if (uart->read_index != uart->save_index) + { + *ptr = uart->rx_buffer[uart->read_index]; + + uart->read_index ++; + if (uart->read_index >= RT_UART_RX_BUFFER_SIZE) + uart->read_index = 0; + } + else + { + /* no data in rx buffer */ + + /* enable interrupt */ + rt_hw_interrupt_enable(level); + break; + } + + /* enable interrupt */ + rt_hw_interrupt_enable(level); + + ptr ++; + size --; + } + + return (rt_uint32_t)ptr - (rt_uint32_t)buffer; + } + + return 0; +} + +static rt_size_t rt_uart_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size) +{ + char *ptr; + ptr = (char*)buffer; + + if (dev->flag & RT_DEVICE_FLAG_STREAM) + { + /* stream mode */ + while (size) + { + if (*ptr == '\n') + { + /* THRE status, contain valid data */ + while ( !(LPC_UART->LSR & LSR_THRE) ); + /* write data */ + LPC_UART->THR = '\r'; + } + + /* THRE status, contain valid data */ + while ( !(LPC_UART->LSR & LSR_THRE) ); + /* write data */ + LPC_UART->THR = *ptr; + + ptr ++; + size --; + } + } + else + { + while ( size != 0 ) + { + /* THRE status, contain valid data */ + while ( !(LPC_UART->LSR & LSR_THRE) ); + + /* write data */ + LPC_UART->THR = *ptr; + + ptr++; + size--; + } + } + + return (rt_size_t) ptr - (rt_size_t) buffer; +} + +void rt_hw_uart_init(void) +{ + struct rt_uart_lpc* uart; + + /* get uart device */ + uart = &uart_device; + + /* device initialization */ + uart->parent.type = RT_Device_Class_Char; + rt_memset(uart->rx_buffer, 0, sizeof(uart->rx_buffer)); + uart->read_index = uart->save_index = 0; + + /* device interface */ + uart->parent.init = rt_uart_init; + uart->parent.open = rt_uart_open; + uart->parent.close = rt_uart_close; + uart->parent.read = rt_uart_read; + uart->parent.write = rt_uart_write; + uart->parent.control = RT_NULL; + uart->parent.private = RT_NULL; + + rt_device_register(&uart->parent, + "uart", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_STREAM | RT_DEVICE_FLAG_INT_RX); +} +#endif /* end of UART */ + +/*@}*/ diff --git a/bsp/lpc1114/uart.h b/bsp/lpc1114/uart.h new file mode 100644 index 0000000000..7b4663aa3d --- /dev/null +++ b/bsp/lpc1114/uart.h @@ -0,0 +1,6 @@ +#ifndef __UART_H__ +#define __UART_H__ + +void rt_hw_uart_init(void); + +#endif diff --git a/include/rtdef.h b/include/rtdef.h index 5e112ec575..d3868ae8d3 100644 --- a/include/rtdef.h +++ b/include/rtdef.h @@ -60,12 +60,14 @@ typedef rt_uint32_t rt_off_t; /* Type for offset. */ #include #define SECTION(x) __attribute__((section(x))) #define UNUSED __attribute__((unused)) + #define ALIGN(n) __attribute__((aligned(n))) #define rt_inline static __inline #elif defined (__ICCARM__) /* for IAR Compiler */ #include #define SECTION(x) @ x #define UNUSED + #define ALIGN(n) #pragma pack(n) #define rt_inline inline #elif defined (__GNUC__) /* GNU GCC Compiler */ @@ -87,6 +89,7 @@ typedef rt_uint32_t rt_off_t; /* Type for offset. */ #define SECTION(x) __attribute__((section(x))) #define UNUSED __attribute__((unused)) + #define ALIGN(n) __attribute__((aligned(n))) #define rt_inline static __inline #endif diff --git a/libcpu/arm/lpc1100/CMSIS/LPC11xx.h b/libcpu/arm/lpc1100/CMSIS/LPC11xx.h new file mode 100644 index 0000000000..58c4de507a --- /dev/null +++ b/libcpu/arm/lpc1100/CMSIS/LPC11xx.h @@ -0,0 +1,499 @@ +/**************************************************************************//** + * @file LPC11xx.h + * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File for + * NXP LPC11xx Device Series + * @version V1.00 + * @date 17. November 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + + +#ifndef __LPC11xx_H__ +#define __LPC11xx_H__ + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup LPC11xx_Definitions LPC11xx Definitions + This file defines all structures and symbols for LPC11xx: + - Registers and bitfields + - peripheral base address + - peripheral ID + - PIO definitions + @{ +*/ + + +/******************************************************************************/ +/* Processor and Core Peripherals */ +/******************************************************************************/ +/** @addtogroup LPC11xx_CMSIS LPC11xx CMSIS Definitions + Configuration of the Cortex-M0 Processor and Core Peripherals + @{ +*/ + +/* + * ========================================================================== + * ---------- Interrupt Number Definition ----------------------------------- + * ========================================================================== + */ + +typedef enum IRQn +{ +/****** Cortex-M0 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */ + +/****** LPC11xx Specific Interrupt Numbers *******************************************************/ + WAKEUP0_IRQn = 0, /*!< All I/O pins can be used as wakeup source. */ + WAKEUP1_IRQn = 1, /*!< There are 13 pins in total for LPC11xx */ + WAKEUP2_IRQn = 2, + WAKEUP3_IRQn = 3, + WAKEUP4_IRQn = 4, + WAKEUP5_IRQn = 5, + WAKEUP6_IRQn = 6, + WAKEUP7_IRQn = 7, + WAKEUP8_IRQn = 8, + WAKEUP9_IRQn = 9, + WAKEUP10_IRQn = 10, + WAKEUP11_IRQn = 11, + WAKEUP12_IRQn = 12, + SSP1_IRQn = 14, /*!< SSP1 Interrupt */ + I2C_IRQn = 15, /*!< I2C Interrupt */ + TIMER_16_0_IRQn = 16, /*!< 16-bit Timer0 Interrupt */ + TIMER_16_1_IRQn = 17, /*!< 16-bit Timer1 Interrupt */ + TIMER_32_0_IRQn = 18, /*!< 32-bit Timer0 Interrupt */ + TIMER_32_1_IRQn = 19, /*!< 32-bit Timer1 Interrupt */ + SSP0_IRQn = 20, /*!< SSP0 Interrupt */ + UART_IRQn = 21, /*!< UART Interrupt */ + ADC_IRQn = 24, /*!< A/D Converter Interrupt */ + WDT_IRQn = 25, /*!< Watchdog timer Interrupt */ + BOD_IRQn = 26, /*!< Brown Out Detect(BOD) Interrupt */ + EINT3_IRQn = 28, /*!< External Interrupt 3 Interrupt */ + EINT2_IRQn = 29, /*!< External Interrupt 2 Interrupt */ + EINT1_IRQn = 30, /*!< External Interrupt 1 Interrupt */ + EINT0_IRQn = 31, /*!< External Interrupt 0 Interrupt */ +} IRQn_Type; + + +/* + * ========================================================================== + * ----------- Processor and Core Peripheral Section ------------------------ + * ========================================================================== + */ + +/* Configuration of the Cortex-M3 Processor and Core Peripherals */ +#define __MPU_PRESENT 0 /*!< MPU present or not */ +#define __NVIC_PRIO_BITS 3 /*!< Number of Bits used for Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +/*@}*/ /* end of group LPC11xx_CMSIS */ + + +#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */ +#include "system_LPC11xx.h" /* System Header */ + + +/******************************************************************************/ +/* Device Specific Peripheral Registers structures */ +/******************************************************************************/ + +#if defined ( __CC_ARM ) +#pragma anon_unions +#endif + +/*------------- System Control (SYSCON) --------------------------------------*/ +/** @addtogroup LPC11xx_SYSCON LPC11xx System Control Block + @{ +*/ +typedef struct +{ + __IO uint32_t SYSMEMREMAP; /*!< Offset: 0x000 System memory remap (R/W) */ + __IO uint32_t PRESETCTRL; /*!< Offset: 0x004 Peripheral reset control (R/W) */ + __IO uint32_t SYSPLLCTRL; /*!< Offset: 0x008 System PLL control (R/W) */ + __IO uint32_t SYSPLLSTAT; /*!< Offset: 0x00C System PLL status (R/ ) */ + uint32_t RESERVED0[4]; + + __IO uint32_t SYSOSCCTRL; /*!< Offset: 0x020 System oscillator control (R/W) */ + __IO uint32_t WDTOSCCTRL; /*!< Offset: 0x024 Watchdog oscillator control (R/W) */ + __IO uint32_t IRCCTRL; /*!< Offset: 0x028 IRC control (R/W) */ + uint32_t RESERVED1[1]; + __IO uint32_t SYSRESSTAT; /*!< Offset: 0x030 System reset status Register (R/ ) */ + uint32_t RESERVED2[3]; + __IO uint32_t SYSPLLCLKSEL; /*!< Offset: 0x040 System PLL clock source select (R/W) */ + __IO uint32_t SYSPLLCLKUEN; /*!< Offset: 0x044 System PLL clock source update enable (R/W) */ + uint32_t RESERVED3[10]; + + __IO uint32_t MAINCLKSEL; /*!< Offset: 0x070 Main clock source select (R/W) */ + __IO uint32_t MAINCLKUEN; /*!< Offset: 0x074 Main clock source update enable (R/W) */ + __IO uint32_t SYSAHBCLKDIV; /*!< Offset: 0x078 System AHB clock divider (R/W) */ + uint32_t RESERVED4[1]; + + __IO uint32_t SYSAHBCLKCTRL; /*!< Offset: 0x080 System AHB clock control (R/W) */ + uint32_t RESERVED5[4]; + __IO uint32_t SSP0CLKDIV; /*!< Offset: 0x094 SSP0 clock divider (R/W) */ + __IO uint32_t UARTCLKDIV; /*!< Offset: 0x098 UART clock divider (R/W) */ + __IO uint32_t SSP1CLKDIV; /*!< Offset: 0x09C SSP1 clock divider (R/W) */ + uint32_t RESERVED6[4]; + + __IO uint32_t SYSTICKCLKDIV; /*!< Offset: 0x0B0 SYSTICK clock divider (R/W) */ + uint32_t RESERVED7[7]; + + __IO uint32_t WDTCLKSEL; /*!< Offset: 0x0D0 WDT clock source select (R/W) */ + __IO uint32_t WDTCLKUEN; /*!< Offset: 0x0D4 WDT clock source update enable (R/W) */ + __IO uint32_t WDTCLKDIV; /*!< Offset: 0x0D8 WDT clock divider (R/W) */ + uint32_t RESERVED8[1]; + __IO uint32_t CLKOUTCLKSEL; /*!< Offset: 0x0E0 CLKOUT clock source select (R/W) */ + __IO uint32_t CLKOUTUEN; /*!< Offset: 0x0E4 CLKOUT clock source update enable (R/W) */ + __IO uint32_t CLKOUTDIV; /*!< Offset: 0x0E8 CLKOUT clock divider (R/W) */ + uint32_t RESERVED9[5]; + + __IO uint32_t PIOPORCAP0; /*!< Offset: 0x100 POR captured PIO status 0 (R/ ) */ + __IO uint32_t PIOPORCAP1; /*!< Offset: 0x104 POR captured PIO status 1 (R/ ) */ + uint32_t RESERVED10[18]; + + __IO uint32_t BODCTRL; /*!< Offset: 0x150 BOD control (R/W) */ + uint32_t RESERVED11[1]; + __IO uint32_t SYSTCKCAL; /*!< Offset: 0x158 System tick counter calibration (R/W) */ + uint32_t RESERVED12[41]; + + __IO uint32_t STARTAPRP0; /*!< Offset: 0x200 Start logic edge control Register 0 (R/W) */ + __IO uint32_t STARTERP0; /*!< Offset: 0x204 Start logic signal enable Register 0 (R/W) */ + __IO uint32_t STARTRSRP0CLR; /*!< Offset: 0x208 Start logic reset Register 0 ( /W) */ + __IO uint32_t STARTSRP0; /*!< Offset: 0x20C Start logic status Register 0 (R/W) */ + uint32_t RESERVED14[8]; + + __IO uint32_t PDSLEEPCFG; /*!< Offset: 0x230 Power-down states in Deep-sleep mode (R/W) */ + __IO uint32_t PDAWAKECFG; /*!< Offset: 0x234 Power-down states after wake-up (R/W) */ + __IO uint32_t PDRUNCFG; /*!< Offset: 0x238 Power-down configuration Register (R/W) */ + uint32_t RESERVED15[110]; + __I uint32_t DEVICE_ID; /*!< Offset: 0x3F4 Device ID (R/ ) */ +} LPC_SYSCON_TypeDef; +/*@}*/ /* end of group LPC11xx_SYSCON */ + + +/*------------- Pin Connect Block (IOCON) --------------------------------*/ +/** @addtogroup LPC11xx_IOCON LPC11xx I/O Configuration Block + @{ +*/ +typedef struct +{ + __IO uint32_t PIO2_6; /*!< Offset: 0x000 I/O configuration for pin PIO2_6 (R/W) */ + uint32_t RESERVED0[1]; + __IO uint32_t PIO2_0; /*!< Offset: 0x008 I/O configuration for pin PIO2_0/DTR/SSEL1 (R/W) */ + __IO uint32_t RESET_PIO0_0; /*!< Offset: 0x00C I/O configuration for pin RESET/PIO0_0 (R/W) */ + __IO uint32_t PIO0_1; /*!< Offset: 0x010 I/O configuration for pin PIO0_1/CLKOUT/CT32B0_MAT2 (R/W) */ + __IO uint32_t PIO1_8; /*!< Offset: 0x014 I/O configuration for pin PIO1_8/CT16B1_CAP0 (R/W) */ + uint32_t RESERVED1[1]; + __IO uint32_t PIO0_2; /*!< Offset: 0x01C I/O configuration for pin PIO0_2/SSEL0/CT16B0_CAP0 (R/W) */ + + __IO uint32_t PIO2_7; /*!< Offset: 0x020 I/O configuration for pin PIO2_7 (R/W) */ + __IO uint32_t PIO2_8; /*!< Offset: 0x024 I/O configuration for pin PIO2_8 (R/W) */ + __IO uint32_t PIO2_1; /*!< Offset: 0x028 I/O configuration for pin PIO2_1/nDSR/SCK1 (R/W) */ + __IO uint32_t PIO0_3; /*!< Offset: 0x02C I/O configuration for pin PIO0_3 (R/W) */ + __IO uint32_t PIO0_4; /*!< Offset: 0x030 I/O configuration for pin PIO0_4/SCL (R/W) */ + __IO uint32_t PIO0_5; /*!< Offset: 0x034 I/O configuration for pin PIO0_5/SDA (R/W) */ + __IO uint32_t PIO1_9; /*!< Offset: 0x038 I/O configuration for pin PIO1_9/CT16B1_MAT0 (R/W) */ + __IO uint32_t PIO3_4; /*!< Offset: 0x03C I/O configuration for pin PIO3_4 (R/W) */ + + __IO uint32_t PIO2_4; /*!< Offset: 0x040 I/O configuration for pin PIO2_4 (R/W) */ + __IO uint32_t PIO2_5; /*!< Offset: 0x044 I/O configuration for pin PIO2_5 (R/W) */ + __IO uint32_t PIO3_5; /*!< Offset: 0x048 I/O configuration for pin PIO3_5 (R/W) */ + __IO uint32_t PIO0_6; /*!< Offset: 0x04C I/O configuration for pin PIO0_6/SCK0 (R/W) */ + __IO uint32_t PIO0_7; /*!< Offset: 0x050 I/O configuration for pin PIO0_7/nCTS (R/W) */ + __IO uint32_t PIO2_9; /*!< Offset: 0x054 I/O configuration for pin PIO2_9 (R/W) */ + __IO uint32_t PIO2_10; /*!< Offset: 0x058 I/O configuration for pin PIO2_10 (R/W) */ + __IO uint32_t PIO2_2; /*!< Offset: 0x05C I/O configuration for pin PIO2_2/DCD/MISO1 (R/W) */ + + __IO uint32_t PIO0_8; /*!< Offset: 0x060 I/O configuration for pin PIO0_8/MISO0/CT16B0_MAT0 (R/W) */ + __IO uint32_t PIO0_9; /*!< Offset: 0x064 I/O configuration for pin PIO0_9/MOSI0/CT16B0_MAT1 (R/W) */ + __IO uint32_t JTAG_TCK_PIO0_10; /*!< Offset: 0x068 I/O configuration for pin SWCLK/PIO0_10/SCK0/CT16B0_MAT2 (R/W) */ + __IO uint32_t PIO1_10; /*!< Offset: 0x06C I/O configuration for pin PIO1_10/AD6/CT16B1_MAT1 (R/W) */ + __IO uint32_t PIO2_11; /*!< Offset: 0x070 I/O configuration for pin PIO2_11/SCK0 (R/W) */ + __IO uint32_t JTAG_TDI_PIO0_11; /*!< Offset: 0x074 I/O configuration for pin TDI/PIO0_11/AD0/CT32B0_MAT3 (R/W) */ + __IO uint32_t JTAG_TMS_PIO1_0; /*!< Offset: 0x078 I/O configuration for pin TMS/PIO1_0/AD1/CT32B1_CAP0 (R/W) */ + __IO uint32_t JTAG_TDO_PIO1_1; /*!< Offset: 0x07C I/O configuration for pin TDO/PIO1_1/AD2/CT32B1_MAT0 (R/W) */ + + __IO uint32_t JTAG_nTRST_PIO1_2; /*!< Offset: 0x080 I/O configuration for pin nTRST/PIO1_2/AD3/CT32B1_MAT1 (R/W) */ + __IO uint32_t PIO3_0; /*!< Offset: 0x084 I/O configuration for pin PIO3_0/nDTR (R/W) */ + __IO uint32_t PIO3_1; /*!< Offset: 0x088 I/O configuration for pin PIO3_1/nDSR (R/W) */ + __IO uint32_t PIO2_3; /*!< Offset: 0x08C I/O configuration for pin PIO2_3/RI/MOSI1 (R/W) */ + __IO uint32_t ARM_SWDIO_PIO1_3; /*!< Offset: 0x090 I/O configuration for pin SWDIO/PIO1_3/AD4/CT32B1_MAT2 (R/W) */ + __IO uint32_t PIO1_4; /*!< Offset: 0x094 I/O configuration for pin PIO1_4/AD5/CT32B1_MAT3 (R/W) */ + __IO uint32_t PIO1_11; /*!< Offset: 0x098 I/O configuration for pin PIO1_11/AD7 (R/W) */ + __IO uint32_t PIO3_2; /*!< Offset: 0x09C I/O configuration for pin PIO3_2/nDCD (R/W) */ + + __IO uint32_t PIO1_5; /*!< Offset: 0x0A0 I/O configuration for pin PIO1_5/nRTS/CT32B0_CAP0 (R/W) */ + __IO uint32_t PIO1_6; /*!< Offset: 0x0A4 I/O configuration for pin PIO1_6/RXD/CT32B0_MAT0 (R/W) */ + __IO uint32_t PIO1_7; /*!< Offset: 0x0A8 I/O configuration for pin PIO1_7/TXD/CT32B0_MAT1 (R/W) */ + __IO uint32_t PIO3_3; /*!< Offset: 0x0AC I/O configuration for pin PIO3_3/nRI (R/W) */ + __IO uint32_t SCK_LOC; /*!< Offset: 0x0B0 SCK pin location select Register (R/W) */ + __IO uint32_t DSR_LOC; /*!< Offset: 0x0B4 DSR pin location select Register (R/W) */ + __IO uint32_t DCD_LOC; /*!< Offset: 0x0B8 DCD pin location select Register (R/W) */ + __IO uint32_t RI_LOC; /*!< Offset: 0x0BC RI pin location Register (R/W) */ +} LPC_IOCON_TypeDef; +/*@}*/ /* end of group LPC11xx_IOCON */ + + +/*------------- Power Management Unit (PMU) --------------------------*/ +/** @addtogroup LPC11xx_PMU LPC11xx Power Management Unit + @{ +*/ +typedef struct +{ + __IO uint32_t PCON; /*!< Offset: 0x000 Power control Register (R/W) */ + __IO uint32_t GPREG0; /*!< Offset: 0x004 General purpose Register 0 (R/W) */ + __IO uint32_t GPREG1; /*!< Offset: 0x008 General purpose Register 1 (R/W) */ + __IO uint32_t GPREG2; /*!< Offset: 0x00C General purpose Register 2 (R/W) */ + __IO uint32_t GPREG3; /*!< Offset: 0x010 General purpose Register 3 (R/W) */ + __IO uint32_t GPREG4; /*!< Offset: 0x014 General purpose Register 4 (R/W) */ +} LPC_PMU_TypeDef; +/*@}*/ /* end of group LPC11xx_PMU */ + + +/*------------- General Purpose Input/Output (GPIO) --------------------------*/ +/** @addtogroup LPC11xx_GPIO LPC11xx General Purpose Input/Output + @{ +*/ +typedef struct +{ + union { + __IO uint32_t MASKED_ACCESS[4096]; /*!< Offset: 0x0000 to 0x3FFC Port data Register for pins PIOn_0 to PIOn_11 (R/W) */ + struct { + uint32_t RESERVED0[4095]; + __IO uint32_t DATA; /*!< Offset: 0x3FFC Port data Register (R/W) */ + }; + }; + uint32_t RESERVED1[4096]; + __IO uint32_t DIR; /*!< Offset: 0x8000 Data direction Register (R/W) */ + __IO uint32_t IS; /*!< Offset: 0x8004 Interrupt sense Register (R/W) */ + __IO uint32_t IBE; /*!< Offset: 0x8008 Interrupt both edges Register (R/W) */ + __IO uint32_t IEV; /*!< Offset: 0x800C Interrupt event Register (R/W) */ + __IO uint32_t IE; /*!< Offset: 0x8010 Interrupt mask Register (R/W) */ + __IO uint32_t RIS; /*!< Offset: 0x8014 Raw interrupt status Register (R/ ) */ + __IO uint32_t MIS; /*!< Offset: 0x8018 Masked interrupt status Register (R/ ) */ + __IO uint32_t IC; /*!< Offset: 0x801C Interrupt clear Register (R/W) */ +} LPC_GPIO_TypeDef; +/*@}*/ /* end of group LPC11xx_GPIO */ + + +/*------------- Timer (TMR) --------------------------------------------------*/ +/** @addtogroup LPC11xx_TMR LPC11xx 16/32-bit Counter/Timer + @{ +*/ +typedef struct +{ + __IO uint32_t IR; /*!< Offset: 0x000 Interrupt Register (R/W) */ + __IO uint32_t TCR; /*!< Offset: 0x004 Timer Control Register (R/W) */ + __IO uint32_t TC; /*!< Offset: 0x008 Timer Counter Register (R/W) */ + __IO uint32_t PR; /*!< Offset: 0x00C Prescale Register (R/W) */ + __IO uint32_t PC; /*!< Offset: 0x010 Prescale Counter Register (R/W) */ + __IO uint32_t MCR; /*!< Offset: 0x014 Match Control Register (R/W) */ + __IO uint32_t MR0; /*!< Offset: 0x018 Match Register 0 (R/W) */ + __IO uint32_t MR1; /*!< Offset: 0x01C Match Register 1 (R/W) */ + __IO uint32_t MR2; /*!< Offset: 0x020 Match Register 2 (R/W) */ + __IO uint32_t MR3; /*!< Offset: 0x024 Match Register 3 (R/W) */ + __IO uint32_t CCR; /*!< Offset: 0x028 Capture Control Register (R/W) */ + __I uint32_t CR0; /*!< Offset: 0x02C Capture Register 0 (R/ ) */ + uint32_t RESERVED1[3]; + __IO uint32_t EMR; /*!< Offset: 0x03C External Match Register (R/W) */ + uint32_t RESERVED2[12]; + __IO uint32_t CTCR; /*!< Offset: 0x070 Count Control Register (R/W) */ + __IO uint32_t PWMC; /*!< Offset: 0x074 PWM Control Register (R/W) */ +} LPC_TMR_TypeDef; +/*@}*/ /* end of group LPC11xx_TMR */ + + +/*------------- Universal Asynchronous Receiver Transmitter (UART) -----------*/ +/** @addtogroup LPC11xx_UART LPC11xx Universal Asynchronous Receiver/Transmitter + @{ +*/ +typedef struct +{ + union { + __I uint32_t RBR; /*!< Offset: 0x000 Receiver Buffer Register (R/ ) */ + __O uint32_t THR; /*!< Offset: 0x000 Transmit Holding Register ( /W) */ + __IO uint32_t DLL; /*!< Offset: 0x000 Divisor Latch LSB (R/W) */ + }; + union { + __IO uint32_t DLM; /*!< Offset: 0x004 Divisor Latch MSB (R/W) */ + __IO uint32_t IER; /*!< Offset: 0x000 Interrupt Enable Register (R/W) */ + }; + union { + __I uint32_t IIR; /*!< Offset: 0x008 Interrupt ID Register (R/ ) */ + __O uint32_t FCR; /*!< Offset: 0x008 FIFO Control Register ( /W) */ + }; + __IO uint32_t LCR; /*!< Offset: 0x00C Line Control Register (R/W) */ + __IO uint32_t MCR; /*!< Offset: 0x010 Modem control Register (R/W) */ + __I uint32_t LSR; /*!< Offset: 0x014 Line Status Register (R/ ) */ + __I uint32_t MSR; /*!< Offset: 0x018 Modem status Register (R/ ) */ + __IO uint32_t SCR; /*!< Offset: 0x01C Scratch Pad Register (R/W) */ + __IO uint32_t ACR; /*!< Offset: 0x020 Auto-baud Control Register (R/W) */ + uint32_t RESERVED0; + __IO uint32_t FDR; /*!< Offset: 0x028 Fractional Divider Register (R/W) */ + uint32_t RESERVED1; + __IO uint32_t TER; /*!< Offset: 0x030 Transmit Enable Register (R/W) */ + uint32_t RESERVED2[6]; + __IO uint32_t RS485CTRL; /*!< Offset: 0x04C RS-485/EIA-485 Control Register (R/W) */ + __IO uint32_t ADRMATCH; /*!< Offset: 0x050 RS-485/EIA-485 address match Register (R/W) */ + __IO uint32_t RS485DLY; /*!< Offset: 0x054 RS-485/EIA-485 direction control delay Register (R/W) */ + __I uint32_t FIFOLVL; /*!< Offset: 0x058 FIFO Level Register (R/ ) */ +} LPC_UART_TypeDef; +/*@}*/ /* end of group LPC11xx_UART */ + + +/*------------- Synchronous Serial Communication (SSP) -----------------------*/ +/** @addtogroup LPC11xx_SSP LPC11xx Synchronous Serial Port + @{ +*/ +typedef struct +{ + __IO uint32_t CR0; /*!< Offset: 0x000 Control Register 0 (R/W) */ + __IO uint32_t CR1; /*!< Offset: 0x004 Control Register 1 (R/W) */ + __IO uint32_t DR; /*!< Offset: 0x008 Data Register (R/W) */ + __I uint32_t SR; /*!< Offset: 0x00C Status Registe (R/ ) */ + __IO uint32_t CPSR; /*!< Offset: 0x010 Clock Prescale Register (R/W) */ + __IO uint32_t IMSC; /*!< Offset: 0x014 Interrupt Mask Set and Clear Register (R/W) */ + __IO uint32_t RIS; /*!< Offset: 0x018 Raw Interrupt Status Register (R/W) */ + __IO uint32_t MIS; /*!< Offset: 0x01C Masked Interrupt Status Register (R/W) */ + __IO uint32_t ICR; /*!< Offset: 0x020 SSPICR Interrupt Clear Register (R/W) */ +} LPC_SSP_TypeDef; +/*@}*/ /* end of group LPC11xx_SSP */ + + +/*------------- Inter-Integrated Circuit (I2C) -------------------------------*/ +/** @addtogroup LPC11xx_I2C LPC11xx I2C-Bus Interface + @{ +*/ +typedef struct +{ + __IO uint32_t CONSET; /*!< Offset: 0x000 I2C Control Set Register (R/W) */ + __I uint32_t STAT; /*!< Offset: 0x004 I2C Status Register (R/ ) */ + __IO uint32_t DAT; /*!< Offset: 0x008 I2C Data Register (R/W) */ + __IO uint32_t ADR0; /*!< Offset: 0x00C I2C Slave Address Register 0 (R/W) */ + __IO uint32_t SCLH; /*!< Offset: 0x010 SCH Duty Cycle Register High Half Word (R/W) */ + __IO uint32_t SCLL; /*!< Offset: 0x014 SCL Duty Cycle Register Low Half Word (R/W) */ + __O uint32_t CONCLR; /*!< Offset: 0x018 I2C Control Clear Register ( /W) */ + __IO uint32_t MMCTRL; /*!< Offset: 0x01C Monitor mode control register (R/W) */ + __IO uint32_t ADR1; /*!< Offset: 0x020 I2C Slave Address Register 1 (R/W) */ + __IO uint32_t ADR2; /*!< Offset: 0x024 I2C Slave Address Register 2 (R/W) */ + __IO uint32_t ADR3; /*!< Offset: 0x028 I2C Slave Address Register 3 (R/W) */ + __I uint32_t DATA_BUFFER; /*!< Offset: 0x02C Data buffer register ( /W) */ + __IO uint32_t MASK0; /*!< Offset: 0x030 I2C Slave address mask register 0 (R/W) */ + __IO uint32_t MASK1; /*!< Offset: 0x034 I2C Slave address mask register 1 (R/W) */ + __IO uint32_t MASK2; /*!< Offset: 0x038 I2C Slave address mask register 2 (R/W) */ + __IO uint32_t MASK3; /*!< Offset: 0x03C I2C Slave address mask register 3 (R/W) */ +} LPC_I2C_TypeDef; +/*@}*/ /* end of group LPC11xx_I2C */ + + +/*------------- Watchdog Timer (WDT) -----------------------------------------*/ +/** @addtogroup LPC11xx_WDT LPC11xx WatchDog Timer + @{ +*/ +typedef struct +{ + __IO uint32_t MOD; /*!< Offset: 0x000 Watchdog mode register (R/W) */ + __IO uint32_t TC; /*!< Offset: 0x004 Watchdog timer constant register (R/W) */ + __O uint32_t FEED; /*!< Offset: 0x008 Watchdog feed sequence register ( /W) */ + __I uint32_t TV; /*!< Offset: 0x00C Watchdog timer value register (R/ ) */ +} LPC_WDT_TypeDef; +/*@}*/ /* end of group LPC11xx_WDT */ + + +/*------------- Analog-to-Digital Converter (ADC) ----------------------------*/ +/** @addtogroup LPC11xx_ADC LPC11xx Analog-to-Digital Converter + @{ +*/ +typedef struct +{ + __IO uint32_t CR; /*!< Offset: 0x000 A/D Control Register (R/W) */ + __IO uint32_t GDR; /*!< Offset: 0x004 A/D Global Data Register (R/W) */ + uint32_t RESERVED0; + __IO uint32_t INTEN; /*!< Offset: 0x00C A/D Interrupt Enable Register (R/W) */ + __IO uint32_t DR[8]; /*!< Offset: 0x010-0x02C A/D Channel 0..7 Data Register (R/W) */ + __I uint32_t STAT; /*!< Offset: 0x030 A/D Status Register (R/ ) */ +} LPC_ADC_TypeDef; +/*@}*/ /* end of group LPC11xx_ADC */ + + +#if defined ( __CC_ARM ) +#pragma no_anon_unions +#endif + +/******************************************************************************/ +/* Peripheral memory map */ +/******************************************************************************/ +/* Base addresses */ +#define LPC_FLASH_BASE (0x00000000UL) +#define LPC_RAM_BASE (0x10000000UL) +#define LPC_APB0_BASE (0x40000000UL) +#define LPC_AHB_BASE (0x50000000UL) + +/* APB0 peripherals */ +#define LPC_I2C_BASE (LPC_APB0_BASE + 0x00000) +#define LPC_WDT_BASE (LPC_APB0_BASE + 0x04000) +#define LPC_UART_BASE (LPC_APB0_BASE + 0x08000) +#define LPC_CT16B0_BASE (LPC_APB0_BASE + 0x0C000) +#define LPC_CT16B1_BASE (LPC_APB0_BASE + 0x10000) +#define LPC_CT32B0_BASE (LPC_APB0_BASE + 0x14000) +#define LPC_CT32B1_BASE (LPC_APB0_BASE + 0x18000) +#define LPC_ADC_BASE (LPC_APB0_BASE + 0x1C000) +#define LPC_PMU_BASE (LPC_APB0_BASE + 0x38000) +#define LPC_SSP0_BASE (LPC_APB0_BASE + 0x40000) +#define LPC_IOCON_BASE (LPC_APB0_BASE + 0x44000) +#define LPC_SYSCON_BASE (LPC_APB0_BASE + 0x48000) +#define LPC_SSP1_BASE (LPC_APB0_BASE + 0x58000) + +/* AHB peripherals */ +#define LPC_GPIO_BASE (LPC_AHB_BASE + 0x00000) +#define LPC_GPIO0_BASE (LPC_AHB_BASE + 0x00000) +#define LPC_GPIO1_BASE (LPC_AHB_BASE + 0x10000) +#define LPC_GPIO2_BASE (LPC_AHB_BASE + 0x20000) +#define LPC_GPIO3_BASE (LPC_AHB_BASE + 0x30000) + +/******************************************************************************/ +/* Peripheral declaration */ +/******************************************************************************/ +#define LPC_I2C ((LPC_I2C_TypeDef *) LPC_I2C_BASE ) +#define LPC_WDT ((LPC_WDT_TypeDef *) LPC_WDT_BASE ) +#define LPC_UART ((LPC_UART_TypeDef *) LPC_UART_BASE ) +#define LPC_TMR16B0 ((LPC_TMR_TypeDef *) LPC_CT16B0_BASE) +#define LPC_TMR16B1 ((LPC_TMR_TypeDef *) LPC_CT16B1_BASE) +#define LPC_TMR32B0 ((LPC_TMR_TypeDef *) LPC_CT32B0_BASE) +#define LPC_TMR32B1 ((LPC_TMR_TypeDef *) LPC_CT32B1_BASE) +#define LPC_ADC ((LPC_ADC_TypeDef *) LPC_ADC_BASE ) +#define LPC_PMU ((LPC_PMU_TypeDef *) LPC_PMU_BASE ) +#define LPC_SSP0 ((LPC_SSP_TypeDef *) LPC_SSP0_BASE ) +#define LPC_SSP1 ((LPC_SSP_TypeDef *) LPC_SSP1_BASE ) +#define LPC_IOCON ((LPC_IOCON_TypeDef *) LPC_IOCON_BASE ) +#define LPC_SYSCON ((LPC_SYSCON_TypeDef *) LPC_SYSCON_BASE) +#define LPC_GPIO0 ((LPC_GPIO_TypeDef *) LPC_GPIO0_BASE ) +#define LPC_GPIO1 ((LPC_GPIO_TypeDef *) LPC_GPIO1_BASE ) +#define LPC_GPIO2 ((LPC_GPIO_TypeDef *) LPC_GPIO2_BASE ) +#define LPC_GPIO3 ((LPC_GPIO_TypeDef *) LPC_GPIO3_BASE ) + +#ifdef __cplusplus +} +#endif + +#endif /* __LPC11xx_H__ */ diff --git a/libcpu/arm/lpc1100/CMSIS/core_cm0.c b/libcpu/arm/lpc1100/CMSIS/core_cm0.c new file mode 100644 index 0000000000..c08a7b6c6e --- /dev/null +++ b/libcpu/arm/lpc1100/CMSIS/core_cm0.c @@ -0,0 +1,455 @@ +/**************************************************************************//** + * @file core_cm0.c + * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Source File + * @version V1.30 + * @date 30. October 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + +#include + +/* define compiler specific symbols */ +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + + +/* ################### Compiler specific Intrinsics ########################### */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +__ASM uint32_t __get_PSP(void) +{ + mrs r0, psp + bx lr +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +__ASM void __set_PSP(uint32_t topOfProcStack) +{ + msr psp, r0 + bx lr +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +__ASM uint32_t __get_MSP(void) +{ + mrs r0, msp + bx lr +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +__ASM void __set_MSP(uint32_t mainStackPointer) +{ + msr msp, r0 + bx lr +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +__ASM uint32_t __REV16(uint16_t value) +{ + rev16 r0, r0 + bx lr +} + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +__ASM int32_t __REVSH(int16_t value) +{ + revsh r0, r0 + bx lr +} + + +#if (__ARMCC_VERSION < 400000) + + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +__ASM uint32_t __get_PRIMASK(void) +{ + mrs r0, primask + bx lr +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +__ASM void __set_PRIMASK(uint32_t priMask) +{ + msr primask, r0 + bx lr +} + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +__ASM uint32_t __get_CONTROL(void) +{ + mrs r0, control + bx lr +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +__ASM void __set_CONTROL(uint32_t control) +{ + msr control, r0 + bx lr +} + +#endif /* __ARMCC_VERSION */ + + + +#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ +#pragma diag_suppress=Pe940 + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +uint32_t __get_PSP(void) +{ + __ASM("mrs r0, psp"); + __ASM("bx lr"); +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +void __set_PSP(uint32_t topOfProcStack) +{ + __ASM("msr psp, r0"); + __ASM("bx lr"); +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +uint32_t __get_MSP(void) +{ + __ASM("mrs r0, msp"); + __ASM("bx lr"); +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +void __set_MSP(uint32_t topOfMainStack) +{ + __ASM("msr msp, r0"); + __ASM("bx lr"); +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +uint32_t __REV16(uint16_t value) +{ + __ASM("rev16 r0, r0"); + __ASM("bx lr"); +} + + +#pragma diag_default=Pe940 + + +#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +uint32_t __get_PSP(void) __attribute__( ( naked ) ); +uint32_t __get_PSP(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, psp\n\t" + "MOV r0, %0 \n\t" + "BX lr \n\t" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) ); +void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0\n\t" + "BX lr \n\t" : : "r" (topOfProcStack) ); +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +uint32_t __get_MSP(void) __attribute__( ( naked ) ); +uint32_t __get_MSP(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, msp\n\t" + "MOV r0, %0 \n\t" + "BX lr \n\t" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) ); +void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0\n\t" + "BX lr \n\t" : : "r" (topOfMainStack) ); +} + + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +uint32_t __get_PRIMASK(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) ); +} + +/** + * @brief Return the Control Register value +* +* @return Control value + * + * Return the content of the control register + */ +uint32_t __get_CONTROL(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) ); +} + + +/** + * @brief Reverse byte order in integer value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in integer value + */ +uint32_t __REV(uint32_t value) +{ + uint32_t result=0; + + __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +uint32_t __REV16(uint16_t value) +{ + uint32_t result=0; + + __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +int32_t __REVSH(int16_t value) +{ + uint32_t result=0; + + __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + + +#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all instrinsics, + * Including the CMSIS ones. + */ + +#endif diff --git a/libcpu/arm/lpc1100/CMSIS/core_cm0.h b/libcpu/arm/lpc1100/CMSIS/core_cm0.h new file mode 100644 index 0000000000..f148b8fad5 --- /dev/null +++ b/libcpu/arm/lpc1100/CMSIS/core_cm0.h @@ -0,0 +1,960 @@ +/**************************************************************************//** + * @file core_cm0.h + * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File + * @version V1.30 + * @date 30. October 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + +#ifndef __CM0_CORE_H__ +#define __CM0_CORE_H__ + +/** @addtogroup CMSIS_CM0_core_LintCinfiguration CMSIS CM0 Core Lint Configuration + * + * List of Lint messages which will be suppressed and not shown: + * - not yet checked + * . + * Note: To re-enable a Message, insert a space before 'lint' * + * + */ + + +/** @addtogroup CMSIS_CM0_core_definitions CM0 Core Definitions + This file defines all structures and symbols for CMSIS core: + - CMSIS version number + - Cortex-M core registers and bitfields + - Cortex-M core peripheral base address + @{ + */ + +#ifdef __cplusplus + extern "C" { +#endif + +#define __CM0_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */ +#define __CM0_CMSIS_VERSION_SUB (0x30) /*!< [15:0] CMSIS HAL sub version */ +#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | __CM0_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x00) /*!< Cortex core */ + +#include /* Include standard types */ + +#if defined (__ICCARM__) + #include /* IAR Intrinsics */ +#endif + + +#ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2 /*!< standard definition for NVIC Priority Bits */ +#endif + + + + +/** + * IO definitions + * + * define access restrictions to peripheral registers + */ + +#ifdef __cplusplus + #define __I volatile /*!< defines 'read only' permissions */ +#else + #define __I volatile const /*!< defines 'read only' permissions */ +#endif +#define __O volatile /*!< defines 'write only' permissions */ +#define __IO volatile /*!< defines 'read / write' permissions */ + + + +/******************************************************************************* + * Register Abstraction + ******************************************************************************/ +/** @addtogroup CMSIS_CM0_core_register CMSIS CM0 Core Register + @{ +*/ + + +/** @addtogroup CMSIS_CM0_NVIC CMSIS CM0 NVIC + memory mapped structure for Nested Vectored Interrupt Controller (NVIC) + @{ + */ +typedef struct +{ + __IO uint32_t ISER[1]; /*!< (Offset: 0x000) Interrupt Set Enable Register */ + uint32_t RESERVED0[31]; + __IO uint32_t ICER[1]; /*!< (Offset: 0x080) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31]; + __IO uint32_t ISPR[1]; /*!< (Offset: 0x100) Interrupt Set Pending Register */ + uint32_t RESERVED2[31]; + __IO uint32_t ICPR[1]; /*!< (Offset: 0x180) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31]; + uint32_t RESERVED4[64]; + __IO uint32_t IPR[8]; /*!< (Offset: 0x3EC) Interrupt Priority Register */ +} NVIC_Type; +/*@}*/ /* end of group CMSIS_CM0_NVIC */ + + +/** @addtogroup CMSIS_CM0_SCB CMSIS CM0 SCB + memory mapped structure for System Control Block (SCB) + @{ + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x00 CPU ID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x04 Interrupt Control State Register */ + uint32_t RESERVED0; + __IO uint32_t AIRCR; /*!< Offset: 0x0C Application Interrupt / Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x10 System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x14 Configuration Control Register */ + uint32_t RESERVED1; + __IO uint32_t SHP[2]; /*!< Offset: 0x1C System Handlers Priority Registers. [0] is RESERVED */ + __IO uint32_t SHCSR; /*!< Offset: 0x24 System Handler Control and State Register */ + uint32_t RESERVED2[2]; + __IO uint32_t DFSR; /*!< Offset: 0x30 Debug Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFul << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFul << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFul << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFul << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFul << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1ul << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1ul << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1ul << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1ul << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1ul << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1ul << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1ul << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFul << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFul << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFul << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1ul << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1ul << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1ul << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1ul << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1ul << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1ul << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1ul << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1ul << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1ul << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1ul << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1ul << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1ul << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1ul << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ +/*@}*/ /* end of group CMSIS_CM0_SCB */ + + +/** @addtogroup CMSIS_CM0_SysTick CMSIS CM0 SysTick + memory mapped structure for SysTick + @{ + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ +/*@}*/ /* end of group CMSIS_CM0_SysTick */ + + +/** @addtogroup CMSIS_CM0_CoreDebug CMSIS CM0 Core Debug + memory mapped structure for Core Debug Register + @{ + */ +typedef struct +{ + __IO uint32_t DHCSR; /*!< Offset: 0x00 Debug Halting Control and Status Register */ + __O uint32_t DCRSR; /*!< Offset: 0x04 Debug Core Register Selector Register */ + __IO uint32_t DCRDR; /*!< Offset: 0x08 Debug Core Register Data Register */ + __IO uint32_t DEMCR; /*!< Offset: 0x0C Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1ul << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1ul << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1ul << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1ul << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1ul << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register */ +#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1ul << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24 /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1ul << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ +/*@}*/ /* end of group CMSIS_CM0_CoreDebug */ + + +/* Memory mapping of Cortex-M0 Hardware */ +#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */ +#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +/*@}*/ /* end of group CMSIS_CM0_core_register */ + + +/******************************************************************************* + * Hardware Abstraction Layer + ******************************************************************************/ + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + + +/* ################### Compiler specific Intrinsics ########################### */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +#define __enable_fault_irq __enable_fiq +#define __disable_fault_irq __disable_fiq + +#define __NOP __nop +#define __WFI __wfi +#define __WFE __wfe +#define __SEV __sev +#define __ISB() __isb(0) +#define __DSB() __dsb(0) +#define __DMB() __dmb(0) +#define __REV __rev + + +/* intrinsic void __enable_irq(); */ +/* intrinsic void __disable_irq(); */ + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +extern int32_t __REVSH(int16_t value); + + +#if (__ARMCC_VERSION < 400000) + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +extern uint32_t __get_PRIMASK(void); + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +extern void __set_PRIMASK(uint32_t priMask); + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +extern uint32_t __get_CONTROL(void); + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +extern void __set_CONTROL(uint32_t control); + +#else /* (__ARMCC_VERSION >= 400000) */ + + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +static __INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +static __INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +static __INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +static __INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + +#endif /* __ARMCC_VERSION */ + + + +#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ + +#define __enable_irq __enable_interrupt /*!< global Interrupt enable */ +#define __disable_irq __disable_interrupt /*!< global Interrupt disable */ + +static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); } +static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); } + +#define __NOP __no_operation /*!< no operation intrinsic in IAR Compiler */ +static __INLINE void __WFI() { __ASM ("wfi"); } +static __INLINE void __WFE() { __ASM ("wfe"); } +static __INLINE void __SEV() { __ASM ("sev"); } + +/* intrinsic void __ISB(void) */ +/* intrinsic void __DSB(void) */ +/* intrinsic void __DMB(void) */ +/* intrinsic void __set_PRIMASK(); */ +/* intrinsic void __get_PRIMASK(); */ + + +/* intrinsic uint32_t __REV(uint32_t value); */ +/* intrinsic uint32_t __REVSH(uint32_t value); */ + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + + + + + +#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +static __INLINE void __enable_irq() { __ASM volatile ("cpsie i"); } +static __INLINE void __disable_irq() { __ASM volatile ("cpsid i"); } + +static __INLINE void __enable_fault_irq() { __ASM volatile ("cpsie f"); } +static __INLINE void __disable_fault_irq() { __ASM volatile ("cpsid f"); } + +static __INLINE void __NOP() { __ASM volatile ("nop"); } +static __INLINE void __WFI() { __ASM volatile ("wfi"); } +static __INLINE void __WFE() { __ASM volatile ("wfe"); } +static __INLINE void __SEV() { __ASM volatile ("sev"); } +static __INLINE void __ISB() { __ASM volatile ("isb"); } +static __INLINE void __DSB() { __ASM volatile ("dsb"); } +static __INLINE void __DMB() { __ASM volatile ("dmb"); } + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +extern uint32_t __get_PRIMASK(void); + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +extern void __set_PRIMASK(uint32_t priMask); + +/** + * @brief Return the Control Register value +* +* @return Control value + * + * Return the content of the control register + */ +extern uint32_t __get_CONTROL(void); + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +extern void __set_CONTROL(uint32_t control); + +/** + * @brief Reverse byte order in integer value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in integer value + */ +extern uint32_t __REV(uint32_t value); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +extern int32_t __REVSH(int16_t value); + + +#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all instrinsics, + * Including the CMSIS ones. + */ + +#endif + + +/** @addtogroup CMSIS_CM0_Core_FunctionInterface CMSIS CM0 Core Function Interface + Core Function Interface containing: + - Core NVIC Functions + - Core SysTick Functions + - Core Reset Functions +*/ +/*@{*/ + +/* ########################## NVIC functions #################################### */ + +/* Interrupt Priorities are WORD accessible only under ARMv6M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 ) +#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) ) +#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) ) + + +/** + * @brief Enable Interrupt in NVIC Interrupt Controller + * + * @param IRQn The positive number of the external interrupt to enable + * + * Enable a device specific interupt in the NVIC interrupt controller. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */ +} + +/** + * @brief Disable the interrupt line for external interrupt specified + * + * @param IRQn The positive number of the external interrupt to disable + * + * Disable a device specific interupt in the NVIC interrupt controller. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ +} + +/** + * @brief Read the interrupt pending bit for a device specific interrupt source + * + * @param IRQn The number of the device specifc interrupt + * @return 1 = interrupt pending, 0 = interrupt not pending + * + * Read the pending register in NVIC and return 1 if its status is pending, + * otherwise it returns 0 + */ +static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ +} + +/** + * @brief Set the pending bit for an external interrupt + * + * @param IRQn The number of the interrupt for set pending + * + * Set the pending bit for the specified interrupt. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ +} + +/** + * @brief Clear the pending bit for an external interrupt + * + * @param IRQn The number of the interrupt for clear pending + * + * Clear the pending bit for the specified interrupt. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + +/** + * @brief Set the priority for an interrupt + * + * @param IRQn The number of the interrupt for set priority + * @param priority The priority to set + * + * Set the priority for the specified interrupt. The interrupt + * number can be positive to specify an external (device specific) + * interrupt, or negative to specify an internal (core) interrupt. + * + * Note: The priority cannot be set for every core interrupt. + */ +static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | + (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); } + else { + NVIC->IPR[_IP_IDX(IRQn)] = (NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | + (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); } +} + +/** + * @brief Read the priority for an interrupt + * + * @param IRQn The number of the interrupt for get priority + * @return The priority for the interrupt + * + * Read the priority for the specified interrupt. The interrupt + * number can be positive to specify an external (device specific) + * interrupt, or negative to specify an internal (core) interrupt. + * + * The returned priority value is automatically aligned to the implemented + * priority bits of the microcontroller. + * + * Note: The priority cannot be set for every core interrupt. + */ +static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */ + else { + return((uint32_t)((NVIC->IPR[_IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + + +/* ################################## SysTick function ############################################ */ + +#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0) + +/** + * @brief Initialize and start the SysTick counter and its interrupt. + * + * @param ticks number of ticks between two interrupts + * @return 1 = failed, 0 = successful + * + * Initialise the system tick timer and its interrupt and start the + * system tick timer / counter in free running mode to generate + * periodical interrupts. + */ +static __INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + + + + +/* ################################## Reset function ############################################ */ + +/** + * @brief Initiate a system reset request. + * + * Initiate a system reset request to reset the MCU + */ +static __INLINE void NVIC_SystemReset(void) +{ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@}*/ /* end of group CMSIS_CM0_Core_FunctionInterface */ + +#ifdef __cplusplus +} +#endif + +/*@}*/ /* end of group CMSIS_CM0_core_definitions */ + +#endif /* __CM0_CORE_H__ */ + +/*lint -restore */ diff --git a/libcpu/arm/lpc1100/CMSIS/system_LPC11xx.c b/libcpu/arm/lpc1100/CMSIS/system_LPC11xx.c new file mode 100644 index 0000000000..acf8327afb --- /dev/null +++ b/libcpu/arm/lpc1100/CMSIS/system_LPC11xx.c @@ -0,0 +1,450 @@ +/**************************************************************************//** + * @file system_LPC11xx.c + * @brief CMSIS Cortex-M0 Device Peripheral Access Layer Source File + * for the NXP LPC11xx Device Series + * @version V1.00 + * @date 17. November 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + + +#include +#include "LPC11xx.h" + +/* +//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------ +*/ + +/*--------------------- Clock Configuration ---------------------------------- +// +// Clock Configuration +// System Clock Setup +// System Oscillator Enable +// Select System Oscillator Frequency Range +// <0=> 1 - 20 MHz +// <1=> 15 - 25 MHz +// +// Watchdog Oscillator Enable +// Select Divider for Fclkana +// <0=> 2 <1=> 4 <2=> 6 <3=> 8 +// <4=> 10 <5=> 12 <6=> 14 <7=> 16 +// <8=> 18 <9=> 20 <10=> 22 <11=> 24 +// <12=> 26 <13=> 28 <14=> 30 <15=> 32 +// <16=> 34 <17=> 36 <18=> 38 <19=> 40 +// <20=> 42 <21=> 44 <22=> 46 <23=> 48 +// <24=> 50 <25=> 52 <26=> 54 <27=> 56 +// <28=> 58 <29=> 60 <30=> 62 <31=> 64 +// Select Watchdog Oscillator Analog Frequency (Fclkana) +// <0=> Disabled +// <1=> 0.5 MHz +// <2=> 0.8 MHz +// <3=> 1.1 MHz +// <4=> 1.4 MHz +// <5=> 1.6 MHz +// <6=> 1.8 MHz +// <7=> 2.0 MHz +// <8=> 2.2 MHz +// <9=> 2.4 MHz +// <10=> 2.6 MHz +// <11=> 2.7 MHz +// <12=> 2.9 MHz +// <13=> 3.1 MHz +// <14=> 3.2 MHz +// <15=> 3.4 MHz +// +// Select Input Clock for sys_pllclkin (Register: SYSPLLCLKSEL) +// <0=> IRC Oscillator +// <1=> System Oscillator +// <2=> WDT Oscillator +// <3=> Invalid +// Use System PLL +// F_pll = M * F_in +// F_in must be in the range of 10 MHz to 25 MHz +// M: PLL Multiplier Selection +// <1-32><#-1> +// P: PLL Divider Selection +// <0=> 2 +// <1=> 4 +// <2=> 8 +// <3=> 16 +// DIRECT: Direct CCO Clock Output Enable +// BYPASS: PLL Bypass Enable +// +// Select Input Clock for Main clock (Register: MAINCLKSEL) +// <0=> IRC Oscillator +// <1=> Input Clock to System PLL +// <2=> WDT Oscillator +// <3=> System PLL Clock Out +// +// System AHB Divider <0-255> +// 0 = is disabled +// SYS Clock Enable +// ROM Clock Enable +// RAM Clock Enable +// FLASHREG Flash Register Interface Clock Enable +// FLASHARRAY Flash Array Access Clock Enable +// I2C Clock Enable +// GPIO Clock Enable +// CT16B0 Clock Enable +// CT16B1 Clock Enable +// CT32B0 Clock Enable +// CT32B1 Clock Enable +// SSP0 Clock Enable +// UART Clock Enable +// ADC Clock Enable +// WDT Clock Enable +// IOCON Clock Enable +// SSP1 Clock Enable +// +// SSP0 Clock Divider <0-255> +// 0 = is disabled +// UART Clock Divider <0-255> +// 0 = is disabled +// SSP1 Clock Divider <0-255> +// 0 = is disabled +// +*/ +#define CLOCK_SETUP 1 +#define SYSCLK_SETUP 1 +#define SYSOSC_SETUP 1 +#define SYSOSCCTRL_Val 0x00000000 +#define WDTOSC_SETUP 0 +#define WDTOSCCTRL_Val 0x000000A0 +#define SYSPLLCLKSEL_Val 0x00000001 +#define SYSPLL_SETUP 1 +#define SYSPLLCTRL_Val 0x00000023 +#define MAINCLKSEL_Val 0x00000003 +#define SYSAHBCLKDIV_Val 0x00000001 +#define AHBCLKCTRL_Val 0x0001005F +#define SSP0CLKDIV_Val 0x00000001 +#define UARTCLKDIV_Val 0x00000001 +#define SSP1CLKDIV_Val 0x00000001 + +/*--------------------- Memory Mapping Configuration ------------------------- +// +// Memory Mapping +// System Memory Remap (Register: SYSMEMREMAP) +// <0=> Bootloader mapped to address 0 +// <1=> RAM mapped to address 0 +// <2=> Flash mapped to address 0 +// <3=> Flash mapped to address 0 +// +*/ +#define MEMMAP_SETUP 0 +#define SYSMEMREMAP_Val 0x00000001 + +/* +//-------- <<< end of configuration section >>> ------------------------------ +*/ + +/*---------------------------------------------------------------------------- + Check the register settings + *----------------------------------------------------------------------------*/ +#define CHECK_RANGE(val, min, max) ((val < min) || (val > max)) +#define CHECK_RSVD(val, mask) (val & mask) + +/* Clock Configuration -------------------------------------------------------*/ +#if (CHECK_RSVD((SYSOSCCTRL_Val), ~0x00000003)) + #error "SYSOSCCTRL: Invalid values of reserved bits!" +#endif + +#if (CHECK_RSVD((WDTOSCCTRL_Val), ~0x000001FF)) + #error "WDTOSCCTRL: Invalid values of reserved bits!" +#endif + +#if (CHECK_RANGE((SYSPLLCLKSEL_Val), 0, 2)) + #error "SYSPLLCLKSEL: Value out of range!" +#endif + +#if (CHECK_RSVD((SYSPLLCTRL_Val), ~0x000001FF)) + #error "SYSPLLCTRL: Invalid values of reserved bits!" +#endif + +#if (CHECK_RSVD((MAINCLKSEL_Val), ~0x00000003)) + #error "MAINCLKSEL: Invalid values of reserved bits!" +#endif + +#if (CHECK_RANGE((SYSAHBCLKDIV_Val), 0, 255)) + #error "SYSAHBCLKDIV: Value out of range!" +#endif + +#if (CHECK_RSVD((AHBCLKCTRL_Val), ~0x0001FFFF)) + #error "AHBCLKCTRL: Invalid values of reserved bits!" +#endif + +#if (CHECK_RANGE((SSP0CLKDIV_Val), 0, 255)) + #error "SSP0CLKDIV: Value out of range!" +#endif + +#if (CHECK_RANGE((UARTCLKDIV_Val), 0, 255)) + #error "UARTCLKDIV: Value out of range!" +#endif + +#if (CHECK_RANGE((SSP1CLKDIV_Val), 0, 255)) + #error "SSP1CLKDIV: Value out of range!" +#endif + +#if (CHECK_RSVD((SYSMEMREMAP_Val), ~0x00000003)) + #error "SYSMEMREMAP: Invalid values of reserved bits!" +#endif + + +/*---------------------------------------------------------------------------- + DEFINES + *----------------------------------------------------------------------------*/ + +/*---------------------------------------------------------------------------- + Define clocks + *----------------------------------------------------------------------------*/ +#define __XTAL (12000000UL) /* Oscillator frequency */ +#define __SYS_OSC_CLK ( __XTAL) /* Main oscillator frequency */ +#define __IRC_OSC_CLK (12000000UL) /* Internal RC oscillator frequency */ + + +#define __FREQSEL ((WDTOSCCTRL_Val >> 5) & 0x0F) +#define __DIVSEL (((WDTOSCCTRL_Val & 0x1F) << 1) + 2) + +#if (CLOCK_SETUP) /* Clock Setup */ + #if (SYSCLK_SETUP) /* System Clock Setup */ + #if (WDTOSC_SETUP) /* Watchdog Oscillator Setup*/ + #if (__FREQSEL == 0) + #define __WDT_OSC_CLK ( 400000 / __DIVSEL) + #elif (__FREQSEL == 1) + #define __WDT_OSC_CLK ( 500000 / __DIVSEL) + #elif (__FREQSEL == 2) + #define __WDT_OSC_CLK ( 800000 / __DIVSEL) + #elif (__FREQSEL == 3) + #define __WDT_OSC_CLK (1100000 / __DIVSEL) + #elif (__FREQSEL == 4) + #define __WDT_OSC_CLK (1400000 / __DIVSEL) + #elif (__FREQSEL == 5) + #define __WDT_OSC_CLK (1600000 / __DIVSEL) + #elif (__FREQSEL == 6) + #define __WDT_OSC_CLK (1800000 / __DIVSEL) + #elif (__FREQSEL == 7) + #define __WDT_OSC_CLK (2000000 / __DIVSEL) + #elif (__FREQSEL == 8) + #define __WDT_OSC_CLK (2200000 / __DIVSEL) + #elif (__FREQSEL == 9) + #define __WDT_OSC_CLK (2400000 / __DIVSEL) + #elif (__FREQSEL == 10) + #define __WDT_OSC_CLK (2600000 / __DIVSEL) + #elif (__FREQSEL == 11) + #define __WDT_OSC_CLK (2700000 / __DIVSEL) + #elif (__FREQSEL == 12) + #define __WDT_OSC_CLK (2900000 / __DIVSEL) + #elif (__FREQSEL == 13) + #define __WDT_OSC_CLK (3100000 / __DIVSEL) + #elif (__FREQSEL == 14) + #define __WDT_OSC_CLK (3200000 / __DIVSEL) + #else + #define __WDT_OSC_CLK (3400000 / __DIVSEL) + #endif + #else + #define __WDT_OSC_CLK (1600000 / 2) + #endif // WDTOSC_SETUP + + /* sys_pllclkin calculation */ + #if ((SYSPLLCLKSEL_Val & 0x03) == 0) + #define __SYS_PLLCLKIN (__IRC_OSC_CLK) + #elif ((SYSPLLCLKSEL_Val & 0x03) == 1) + #define __SYS_PLLCLKIN (__SYS_OSC_CLK) + #elif ((SYSPLLCLKSEL_Val & 0x03) == 2) + #define __SYS_PLLCLKIN (__WDT_OSC_CLK) + #else + #define __SYS_PLLCLKIN (0) + #endif + + #if (SYSPLL_SETUP) /* System PLL Setup */ + #define __SYS_PLLCLKOUT (__SYS_PLLCLKIN * ((SYSPLLCTRL_Val & 0x01F) + 1)) + #else + #define __SYS_PLLCLKOUT (__SYS_PLLCLKIN * (1)) + #endif // SYSPLL_SETUP + + /* main clock calculation */ + #if ((MAINCLKSEL_Val & 0x03) == 0) + #define __MAIN_CLOCK (__IRC_OSC_CLK) + #elif ((MAINCLKSEL_Val & 0x03) == 1) + #define __MAIN_CLOCK (__SYS_PLLCLKIN) + #elif ((MAINCLKSEL_Val & 0x03) == 2) + #define __MAIN_CLOCK (__WDT_OSC_CLK) + #elif ((MAINCLKSEL_Val & 0x03) == 3) + #define __MAIN_CLOCK (__SYS_PLLCLKOUT) + #else + #define __MAIN_CLOCK (0) + #endif + + #define __SYSTEM_CLOCK (__MAIN_CLOCK / SYSAHBCLKDIV_Val) + + #else // SYSCLK_SETUP + #if (SYSAHBCLKDIV_Val == 0) + #define __SYSTEM_CLOCK (0) + #else + #define __SYSTEM_CLOCK (__XTAL / SYSAHBCLKDIV_Val) + #endif + #endif // SYSCLK_SETUP + +#else + #define __SYSTEM_CLOCK (__XTAL) +#endif // CLOCK_SETUP + + +/*---------------------------------------------------------------------------- + Clock Variable definitions + *----------------------------------------------------------------------------*/ +uint32_t SystemCoreClock = __SYSTEM_CLOCK;/*!< System Clock Frequency (Core Clock)*/ + + +/*---------------------------------------------------------------------------- + Clock functions + *----------------------------------------------------------------------------*/ +void SystemCoreClockUpdate (void) /* Get Core Clock Frequency */ +{ + uint32_t wdt_osc = 0; + + /* Determine clock frequency according to clock register values */ + switch ((LPC_SYSCON->WDTOSCCTRL >> 5) & 0x0F) { + case 0: wdt_osc = 400000; break; + case 1: wdt_osc = 500000; break; + case 2: wdt_osc = 800000; break; + case 3: wdt_osc = 1100000; break; + case 4: wdt_osc = 1400000; break; + case 5: wdt_osc = 1600000; break; + case 6: wdt_osc = 1800000; break; + case 7: wdt_osc = 2000000; break; + case 8: wdt_osc = 2200000; break; + case 9: wdt_osc = 2400000; break; + case 10: wdt_osc = 2600000; break; + case 11: wdt_osc = 2700000; break; + case 12: wdt_osc = 2900000; break; + case 13: wdt_osc = 3100000; break; + case 14: wdt_osc = 3200000; break; + case 15: wdt_osc = 3400000; break; + } + wdt_osc /= ((LPC_SYSCON->WDTOSCCTRL & 0x1F) << 1) + 2; + + switch (LPC_SYSCON->MAINCLKSEL & 0x03) { + case 0: /* Internal RC oscillator */ + SystemCoreClock = __IRC_OSC_CLK; + break; + case 1: /* Input Clock to System PLL */ + switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) { + case 0: /* Internal RC oscillator */ + SystemCoreClock = __IRC_OSC_CLK; + break; + case 1: /* System oscillator */ + SystemCoreClock = __SYS_OSC_CLK; + break; + case 2: /* WDT Oscillator */ + SystemCoreClock = wdt_osc; + break; + case 3: /* Reserved */ + SystemCoreClock = 0; + break; + } + break; + case 2: /* WDT Oscillator */ + SystemCoreClock = wdt_osc; + break; + case 3: /* System PLL Clock Out */ + switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) { + case 0: /* Internal RC oscillator */ + if (LPC_SYSCON->SYSPLLCTRL & 0x180) { + SystemCoreClock = __IRC_OSC_CLK; + } else { + SystemCoreClock = __IRC_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1); + } + break; + case 1: /* System oscillator */ + if (LPC_SYSCON->SYSPLLCTRL & 0x180) { + SystemCoreClock = __SYS_OSC_CLK; + } else { + SystemCoreClock = __SYS_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1); + } + break; + case 2: /* WDT Oscillator */ + if (LPC_SYSCON->SYSPLLCTRL & 0x180) { + SystemCoreClock = wdt_osc; + } else { + SystemCoreClock = wdt_osc * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1); + } + break; + case 3: /* Reserved */ + SystemCoreClock = 0; + break; + } + break; + } + + SystemCoreClock /= LPC_SYSCON->SYSAHBCLKDIV; + +} + +/** + * Initialize the system + * + * @param none + * @return none + * + * @brief Setup the microcontroller system. + * Initialize the System. + */ +void SystemInit (void) +{ +#if (CLOCK_SETUP) /* Clock Setup */ +#if (SYSCLK_SETUP) /* System Clock Setup */ +#if (SYSOSC_SETUP) /* System Oscillator Setup */ + uint32_t i; + + LPC_SYSCON->PDRUNCFG &= ~(1 << 5); /* Power-up System Osc */ + LPC_SYSCON->SYSOSCCTRL = SYSOSCCTRL_Val; + for (i = 0; i < 200; i++) __NOP(); + LPC_SYSCON->SYSPLLCLKSEL = SYSPLLCLKSEL_Val; /* Select PLL Input */ + LPC_SYSCON->SYSPLLCLKUEN = 0x01; /* Update Clock Source */ + LPC_SYSCON->SYSPLLCLKUEN = 0x00; /* Toggle Update Register */ + LPC_SYSCON->SYSPLLCLKUEN = 0x01; + while (!(LPC_SYSCON->SYSPLLCLKUEN & 0x01)); /* Wait Until Updated */ +#if (SYSPLL_SETUP) /* System PLL Setup */ + LPC_SYSCON->SYSPLLCTRL = SYSPLLCTRL_Val; + LPC_SYSCON->PDRUNCFG &= ~(1 << 7); /* Power-up SYSPLL */ + while (!(LPC_SYSCON->SYSPLLSTAT & 0x01)); /* Wait Until PLL Locked */ +#endif +#endif +#if (WDTOSC_SETUP) /* Watchdog Oscillator Setup*/ + LPC_SYSCON->WDTOSCCTRL = WDTOSCCTRL_Val; + LPC_SYSCON->PDRUNCFG &= ~(1 << 6); /* Power-up WDT Clock */ +#endif + LPC_SYSCON->MAINCLKSEL = MAINCLKSEL_Val; /* Select PLL Clock Output */ + LPC_SYSCON->MAINCLKUEN = 0x01; /* Update MCLK Clock Source */ + LPC_SYSCON->MAINCLKUEN = 0x00; /* Toggle Update Register */ + LPC_SYSCON->MAINCLKUEN = 0x01; + while (!(LPC_SYSCON->MAINCLKUEN & 0x01)); /* Wait Until Updated */ +#endif + + LPC_SYSCON->SYSAHBCLKDIV = SYSAHBCLKDIV_Val; + LPC_SYSCON->SYSAHBCLKCTRL = AHBCLKCTRL_Val; + LPC_SYSCON->SSP0CLKDIV = SSP0CLKDIV_Val; + LPC_SYSCON->UARTCLKDIV = UARTCLKDIV_Val; + LPC_SYSCON->SSP1CLKDIV = SSP1CLKDIV_Val; +#endif + + +#if (MEMMAP_SETUP || MEMMAP_INIT) /* Memory Mapping Setup */ + LPC_SYSCON->SYSMEMREMAP = SYSMEMREMAP_Val; +#endif +} diff --git a/libcpu/arm/lpc1100/CMSIS/system_LPC11xx.h b/libcpu/arm/lpc1100/CMSIS/system_LPC11xx.h new file mode 100644 index 0000000000..385fe3888d --- /dev/null +++ b/libcpu/arm/lpc1100/CMSIS/system_LPC11xx.h @@ -0,0 +1,64 @@ +/**************************************************************************//** + * @file system_LPC11xx.h + * @brief CMSIS Cortex-M0 Device Peripheral Access Layer Header File + * for the NXP LPC11xx Device Series + * @version V1.00 + * @date 17. November 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + + +#ifndef __SYSTEM_LPC11xx_H +#define __SYSTEM_LPC11xx_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include + +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ + + +/** + * Initialize the system + * + * @param none + * @return none + * + * @brief Setup the microcontroller system. + * Initialize the System and update the SystemCoreClock variable. + */ +extern void SystemInit (void); + +/** + * Update SystemCoreClock variable + * + * @param none + * @return none + * + * @brief Updates the SystemCoreClock with current core Clock + * retrieved from cpu registers. + */ +extern void SystemCoreClockUpdate (void); + +#ifdef __cplusplus +} +#endif + +#endif /* __SYSTEM_LPC11x_H */ diff --git a/libcpu/arm/lpc1100/context_rvds.S b/libcpu/arm/lpc1100/context_rvds.S new file mode 100644 index 0000000000..7d9080643e --- /dev/null +++ b/libcpu/arm/lpc1100/context_rvds.S @@ -0,0 +1,175 @@ +;/* +; * File : context_rvds.S +; * This file is part of RT-Thread RTOS +; * COPYRIGHT (C) 2009, RT-Thread Development Team +; * +; * The license and distribution terms for this file may be +; * found in the file LICENSE in this distribution or at +; * http://www.rt-thread.org/license/LICENSE +; * +; * Change Logs: +; * Date Author Notes +; * 2010-01-25 Bernard first version +; */ + +;/** +; * @addtogroup LPC1100 +; */ +;/*@{*/ + +NVIC_INT_CTRL EQU 0xE000ED04 ; interrupt control state register +NVIC_SYSPRI2 EQU 0xE000ED20 ; system priority register (2) +NVIC_PENDSV_PRI EQU 0x00FF0000 ; PendSV priority value (lowest) +NVIC_PENDSVSET EQU 0x10000000 ; value to trigger PendSV exception + + AREA |.text|, CODE, READONLY, ALIGN=2 + THUMB + REQUIRE8 + PRESERVE8 + + IMPORT rt_thread_switch_interrput_flag + IMPORT rt_interrupt_from_thread + IMPORT rt_interrupt_to_thread + +;/* +; * rt_base_t rt_hw_interrupt_disable(); +; */ +rt_hw_interrupt_disable PROC + EXPORT rt_hw_interrupt_disable + MRS r0, PRIMASK + CPSID I + BX LR + ENDP + +;/* +; * void rt_hw_interrupt_enable(rt_base_t level); +; */ +rt_hw_interrupt_enable PROC + EXPORT rt_hw_interrupt_enable + MSR PRIMASK, r0 + BX LR + ENDP + +;/* +; * void rt_hw_context_switch(rt_uint32 from, rt_uint32 to); +; * r0 --> from +; * r1 --> to +; */ +rt_hw_context_switch_interrupt + EXPORT rt_hw_context_switch_interrupt +rt_hw_context_switch PROC + EXPORT rt_hw_context_switch + + ; set rt_thread_switch_interrput_flag to 1 + LDR r2, =rt_thread_switch_interrput_flag + LDR r3, [r2] + CMP r3, #1 + BEQ _reswitch + MOVS r3, #0x1 + STR r3, [r2] + + LDR r2, =rt_interrupt_from_thread ; set rt_interrupt_from_thread + STR r0, [r2] + +_reswitch + LDR r2, =rt_interrupt_to_thread ; set rt_interrupt_to_thread + STR r1, [r2] + + LDR r0, =NVIC_INT_CTRL ; trigger the PendSV exception (causes context switch) + LDR r1, =NVIC_PENDSVSET + STR r1, [r0] + BX LR + ENDP + +; r0 --> swith from thread stack +; r1 --> swith to thread stack +; psr, pc, lr, r12, r3, r2, r1, r0 are pushed into [from] stack +rt_hw_pend_sv PROC + EXPORT rt_hw_pend_sv + + ; disable interrupt to protect context switch + MRS r2, PRIMASK + CPSID I + + ; get rt_thread_switch_interrupt_flag + LDR r0, =rt_thread_switch_interrput_flag + LDR r1, [r0] + CMP r1, #0x00 + BEQ pendsv_exit ; pendsv already handled + + ; clear rt_thread_switch_interrput_flag to 0 + MOVS r1, #0x00 + STR r1, [r0] + + LDR r0, =rt_interrupt_from_thread + LDR r1, [r0] + CMP r1, #0x00 + BEQ swtich_to_thread ; skip register save at the first time + + MRS r1, psp ; get from thread stack pointer + STMIA r1!, {r4 - r7} ; push r4 - r7 register + LDR r0, [r0] + STR r1, [r0] ; update from thread stack pointer + +swtich_to_thread + LDR r1, =rt_interrupt_to_thread + LDR r1, [r1] + LDR r1, [r1] ; load thread stack pointer + + LDMIA r1!, {r4 - r7} ; pop r4 - r7 register + MSR psp, r1 ; update stack pointer + +pendsv_exit + ; restore interrupt + MSR PRIMASK, r2 + + MOV r0, lr + MOVS r1, #0x04 + ORRS r0, r0, r1 + BX r0 + ENDP + +;/* +; * void rt_hw_context_switch_to(rt_uint32 to); +; * r0 --> to +; * this fucntion is used to perform the first thread switch +; */ +rt_hw_context_switch_to PROC + EXPORT rt_hw_context_switch_to + ; set to thread + LDR r1, =rt_interrupt_to_thread + STR r0, [r1] + + ; set from thread to 0 + LDR r1, =rt_interrupt_from_thread + MOVS r0, #0x0 + STR r0, [r1] + + ; set interrupt flag to 1 + LDR r1, =rt_thread_switch_interrput_flag + MOVS r0, #1 + STR r0, [r1] + + ; set the PendSV exception priority + ; LDR r0, =NVIC_SYSPRI2 + ; LDR r1, =NVIC_PENDSV_PRI + ; STR r1, [r0] + + ; trigger the PendSV exception (causes context switch) + LDR r0, =NVIC_INT_CTRL + LDR r1, =NVIC_PENDSVSET + STR r1, [r0] + + ; enable interrupts at processor level + CPSIE I + + ; never reach here! + ENDP + +; compatible with old version +rt_hw_interrupt_thread_switch PROC + EXPORT rt_hw_interrupt_thread_switch + BX lr + ENDP + + END diff --git a/libcpu/arm/lpc1100/cpu.c b/libcpu/arm/lpc1100/cpu.c new file mode 100644 index 0000000000..7efd166a3f --- /dev/null +++ b/libcpu/arm/lpc1100/cpu.c @@ -0,0 +1,42 @@ +/* + * File : cpu.c + * This file is part of RT-Thread RTOS + * COPYRIGHT (C) 2009, RT-Thread Development Team + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.rt-thread.org/license/LICENSE + * + * Change Logs: + * Date Author Notes + * 2010-01-25 Bernard first version + */ + +#include + +/** + * @addtogroup LPC1100 + */ +/*@{*/ + +/** + * reset cpu by dog's time-out + * + */ +void rt_hw_cpu_reset() +{ + /*NOTREACHED*/ +} + +/** + * shutdown CPU + * + */ +void rt_hw_cpu_shutdown() +{ + rt_kprintf("shutdown...\n"); + + RT_ASSERT(0); +} + +/*@}*/ diff --git a/libcpu/arm/lpc1100/fault.c b/libcpu/arm/lpc1100/fault.c new file mode 100644 index 0000000000..5b8dc6b62f --- /dev/null +++ b/libcpu/arm/lpc1100/fault.c @@ -0,0 +1,47 @@ +/* + * File : fault.c + * This file is part of RT-Thread RTOS + * COPYRIGHT (C) 2009, RT-Thread Development Team + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.rt-thread.org/license/LICENSE + * + * Change Logs: + * Date Author Notes + * 2010-01-25 Bernard first version + */ +#include + +struct stack_contex +{ + rt_uint32_t r0; + rt_uint32_t r1; + rt_uint32_t r2; + rt_uint32_t r3; + rt_uint32_t r12; + rt_uint32_t lr; + rt_uint32_t pc; + rt_uint32_t psr; +}; + +extern void rt_hw_interrupt_thread_switch(void); +extern void list_thread(void); +extern rt_thread_t rt_current_thread; +void rt_hw_hard_fault_exception(struct stack_contex* contex) +{ + rt_kprintf("psr: 0x%08x\n", contex->psr); + rt_kprintf(" pc: 0x%08x\n", contex->pc); + rt_kprintf(" lr: 0x%08x\n", contex->lr); + rt_kprintf("r12: 0x%08x\n", contex->r12); + rt_kprintf("r03: 0x%08x\n", contex->r3); + rt_kprintf("r02: 0x%08x\n", contex->r2); + rt_kprintf("r01: 0x%08x\n", contex->r1); + rt_kprintf("r00: 0x%08x\n", contex->r0); + + rt_kprintf("hard fault on thread: %s\n", rt_current_thread->name); +#ifdef RT_USING_FINSH + list_thread(); +#endif + while (1); +} diff --git a/libcpu/arm/lpc1100/fault_rvds.S b/libcpu/arm/lpc1100/fault_rvds.S new file mode 100644 index 0000000000..4029306400 --- /dev/null +++ b/libcpu/arm/lpc1100/fault_rvds.S @@ -0,0 +1,32 @@ +;/* +; * File : fault_rvds.S +; * This file is part of RT-Thread RTOS +; * COPYRIGHT (C) 2006, RT-Thread Development Team +; * +; * The license and distribution terms for this file may be +; * found in the file LICENSE in this distribution or at +; * http://www.rt-thread.org/license/LICENSE +; * +; * Change Logs: +; * Date Author Notes +; * 2010-01-25 Bernard first version +; */ + + AREA |.text|, CODE, READONLY, ALIGN=2 + THUMB + REQUIRE8 + PRESERVE8 + + IMPORT rt_hw_hard_fault_exception + +rt_hw_hard_fault PROC + EXPORT rt_hw_hard_fault + + ; get current context + MRS r0, psp ; get fault thread stack pointer + PUSH {lr} + BL rt_hw_hard_fault_exception + POP {pc} + ENDP + + END diff --git a/libcpu/arm/lpc1100/interrupt.c b/libcpu/arm/lpc1100/interrupt.c new file mode 100644 index 0000000000..a1a3eb2441 --- /dev/null +++ b/libcpu/arm/lpc1100/interrupt.c @@ -0,0 +1,21 @@ +/* + * File : interrupt.c + * This file is part of RT-Thread RTOS + * COPYRIGHT (C) 2009, RT-Thread Development Team + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.rt-thread.org/license/LICENSE + * + * Change Logs: + * Date Author Notes + * 2010-01-25 Bernard first version + */ + +#include + +/* exception and interrupt handler table */ +rt_uint32_t rt_interrupt_from_thread, rt_interrupt_to_thread; +rt_uint8_t rt_thread_switch_interrput_flag; + +/*@}*/ diff --git a/libcpu/arm/lpc1100/stack.c b/libcpu/arm/lpc1100/stack.c new file mode 100644 index 0000000000..6bfa26b08a --- /dev/null +++ b/libcpu/arm/lpc1100/stack.c @@ -0,0 +1,54 @@ +/* + * File : stack.c + * This file is part of RT-Thread RTOS + * COPYRIGHT (C) 2009, RT-Thread Development Team + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.rt-thread.org/license/LICENSE + * + * Change Logs: + * Date Author Notes + * 2010-01-25 Bernard first version + */ +#include + +/** + * @addtogroup LPC1100 + */ +/*@{*/ + +/** + * This function will initialize thread stack + * + * @param tentry the entry of thread + * @param parameter the parameter of entry + * @param stack_addr the beginning stack address + * @param texit the function will be called when thread exit + * + * @return stack address + */ +rt_uint8_t *rt_hw_stack_init(void *tentry, void *parameter, + rt_uint8_t *stack_addr, void *texit) +{ + unsigned long *stk; + + stk = (unsigned long *)stack_addr; + *(stk) = 0x01000000L; /* PSR */ + *(--stk) = (unsigned long)tentry; /* entry point, pc */ + *(--stk) = (unsigned long)texit; /* lr */ + *(--stk) = 0; /* r12 */ + *(--stk) = 0; /* r3 */ + *(--stk) = 0; /* r2 */ + *(--stk) = 0; /* r1 */ + *(--stk) = (unsigned long)parameter; /* r0 : argument */ + *(--stk) = 0; /* r7 */ + *(--stk) = 0; /* r6 */ + *(--stk) = 0; /* r5 */ + *(--stk) = 0; /* r4 */ + + /* return task's current stack address */ + return (rt_uint8_t *)stk; +} + +/*@}*/ diff --git a/libcpu/arm/lpc1100/start_rvds.s b/libcpu/arm/lpc1100/start_rvds.s new file mode 100644 index 0000000000..c0f4ef6bc2 --- /dev/null +++ b/libcpu/arm/lpc1100/start_rvds.s @@ -0,0 +1,252 @@ +;/***************************************************************************** +; * @file: startup_LPC11xx.s +; * @purpose: CMSIS Cortex-M0 Core Device Startup File +; * for the NXP LPC11xx Device Series +; * @version: V1.0 +; * @date: 25. Nov. 2008 +; *------- <<< Use Configuration Wizard in Context Menu >>> ------------------ +; * +; * Copyright (C) 2008 ARM Limited. All rights reserved. +; * ARM Limited (ARM) is supplying this software for use with Cortex-M0 +; * processor based microcontrollers. This file can be freely distributed +; * within development tools that are supporting such ARM based processors. +; * +; * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED +; * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF +; * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. +; * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR +; * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. +; * +; *****************************************************************************/ + + +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000100 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000000 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + + PRESERVE8 + THUMB + + IMPORT rt_hw_hard_fault + IMPORT rt_hw_pend_sv + IMPORT rt_hw_timer_handler + +; Vector Table Mapped to Address 0 at Reset + + AREA RESET, DATA, READONLY + EXPORT __Vectors + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD rt_hw_hard_fault ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD rt_hw_pend_sv ; PendSV Handler + DCD rt_hw_timer_handler ; SysTick Handler + + ; External Interrupts + DCD WAKEUP_IRQHandler ; 15 wakeup sources for all the + DCD WAKEUP_IRQHandler ; I/O pins starting from PIO0 (0:11) + DCD WAKEUP_IRQHandler ; all 40 are routed to the same ISR + DCD WAKEUP_IRQHandler + DCD WAKEUP_IRQHandler + DCD WAKEUP_IRQHandler + DCD WAKEUP_IRQHandler + DCD WAKEUP_IRQHandler + DCD WAKEUP_IRQHandler + DCD WAKEUP_IRQHandler + DCD WAKEUP_IRQHandler + DCD WAKEUP_IRQHandler + DCD WAKEUP_IRQHandler ; PIO1 (0:11) + DCD CAN_IRQHandler ; CAN + DCD SSP1_IRQHandler ; SSP1 + DCD I2C_IRQHandler ; I2C + DCD TIMER16_0_IRQHandler ; 16-bit Timer0 + DCD TIMER16_1_IRQHandler ; 16-bit Timer1 + DCD TIMER32_0_IRQHandler ; 32-bit Timer0 + DCD TIMER32_1_IRQHandler ; 32-bit Timer1 + DCD SSP0_IRQHandler ; SSP0 + DCD UART_IRQHandler ; UART + DCD USB_IRQHandler ; USB IRQ + DCD USB_FIQHandler ; USB FIQ + DCD ADC_IRQHandler ; A/D Converter + DCD WDT_IRQHandler ; Watchdog timer + DCD BOD_IRQHandler ; Brown Out Detect + DCD FMC_IRQHandler ; IP2111 Flash Memory Controller + DCD PIOINT3_IRQHandler ; PIO INT3 + DCD PIOINT2_IRQHandler ; PIO INT2 + DCD PIOINT1_IRQHandler ; PIO INT1 + DCD PIOINT0_IRQHandler ; PIO INT0 + + + IF :LNOT::DEF:NO_CRP + AREA |.ARM.__at_0x02FC|, CODE, READONLY +CRP_Key DCD 0xFFFFFFFF + ENDIF + + + AREA |.text|, CODE, READONLY + + +; Reset Handler + +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + LDR R0, =__main + BX R0 + ENDP + + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WAKEUP_IRQHandler [WEAK] + EXPORT CAN_IRQHandler [WEAK] + EXPORT SSP1_IRQHandler [WEAK] + EXPORT I2C_IRQHandler [WEAK] + EXPORT TIMER16_0_IRQHandler [WEAK] + EXPORT TIMER16_1_IRQHandler [WEAK] + EXPORT TIMER32_0_IRQHandler [WEAK] + EXPORT TIMER32_1_IRQHandler [WEAK] + EXPORT SSP0_IRQHandler [WEAK] + EXPORT UART_IRQHandler [WEAK] + + EXPORT USB_IRQHandler [WEAK] + EXPORT USB_FIQHandler [WEAK] + EXPORT ADC_IRQHandler [WEAK] + EXPORT WDT_IRQHandler [WEAK] + EXPORT BOD_IRQHandler [WEAK] + EXPORT FMC_IRQHandler [WEAK] + EXPORT PIOINT3_IRQHandler [WEAK] + EXPORT PIOINT2_IRQHandler [WEAK] + EXPORT PIOINT1_IRQHandler [WEAK] + EXPORT PIOINT0_IRQHandler [WEAK] + + +WAKEUP_IRQHandler +CAN_IRQHandler +SSP1_IRQHandler +I2C_IRQHandler +TIMER16_0_IRQHandler +TIMER16_1_IRQHandler +TIMER32_0_IRQHandler +TIMER32_1_IRQHandler +SSP0_IRQHandler +UART_IRQHandler +USB_IRQHandler +USB_FIQHandler +ADC_IRQHandler +WDT_IRQHandler +BOD_IRQHandler +FMC_IRQHandler +PIOINT3_IRQHandler +PIOINT2_IRQHandler +PIOINT1_IRQHandler +PIOINT0_IRQHandler + + B . + + ENDP + + + ALIGN + + +; User Initial Stack & Heap + + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + + END