Fix ISA note (#1038)

Sampler V2 doesn't allow optimization level. Also, some instances still
mentioned skip_transpilation, which is not supported in V2.

docs/run/advanced-runtime-options.mdx

@@ -9,7 +9,7 @@ description: Specify options when building with Qiskit runtime primitives
 When calling the primitives, you can pass in options by using an options class or a dictionary. In the options classes, commonly used options, such as `resilience_level`, are at the first level. Other options are grouped into different categories, such as `execution`. See all the available options in the [API reference](../api/qiskit-ibm-runtime/options).
 
 <Admonition type="caution" title="Important">
-To ensure faster and more efficient results, as of 1 March 2024, circuits and observables need to be transformed to only use instructions supported by the system (referred to as *instruction set architecture (ISA)* circuits and observables) before being submitted to the Qiskit Runtime primitives.  See the [transpilation documentation](../transpile) for instructions to transform circuits.  Due to this change, the primitives will no longer perform layout or routing operations.  Consequently, transpilation options referring to those tasks will no longer have any effect. Users can still request that the primitives do no optimization of input circuits by specifying `optimization_level=0`.
+To ensure faster and more efficient results, as of 1 March 2024, circuits and observables need to be transformed to only use instructions supported by the system (referred to as *instruction set architecture (ISA)* circuits and observables) before being submitted to the Qiskit Runtime primitives.  See the [transpilation documentation](../transpile) for instructions to transform circuits.  Due to this change, the primitives will no longer perform layout or routing operations.  Consequently, transpilation options referring to those tasks will no longer have any effect. By default, all primitives except Sampler V2 still optimize the input circuits. To bypass all optimization, set `optimization_level=0`.
 
 *Exception*: When you initialize the Qiskit Runtime Service with the Q-CTRL channel strategy (example below), abstract circuits are still supported.
 

docs/run/configure-error-mitigation.mdx

@@ -41,7 +41,7 @@ expectation values.
 </Admonition>
 
 <Admonition type="caution" title="Important">
-To ensure faster and more efficient results, as of 1 March 2024, circuits and observables need to be transformed to only use instructions supported by the system (referred to as *instruction set architecture (ISA)* circuits and observables) before being submitted to the Qiskit Runtime primitives.  See the [transpilation documentation](../transpile) for instructions to transform circuits.  Due to this change, the primitives will no longer perform layout or routing operations.  Consequently, transpilation options referring to those tasks will no longer have any effect. Users can still request that the primitives do no optimization of input circuits by specifying `optimization_level=0`.
+To ensure faster and more efficient results, as of 1 March 2024, circuits and observables need to be transformed to only use instructions supported by the system (referred to as *instruction set architecture (ISA)* circuits and observables) before being submitted to the Qiskit Runtime primitives.  See the [transpilation documentation](../transpile) for instructions to transform circuits.  Due to this change, the primitives will no longer perform layout or routing operations.  Consequently, transpilation options referring to those tasks will no longer have any effect. By default, all primitives except Sampler V2 still optimize the input circuits. To bypass all optimization, set `optimization_level=0`.
 
 *Exception*: When you initialize the Qiskit Runtime Service with the Q-CTRL channel strategy (example below), abstract circuits are still supported.
 

docs/run/configure-runtime-compilation.mdx

@@ -13,7 +13,7 @@ Primitives let you employ runtime compilation by setting the optimization level
 <admonition type="note">V2 primitives support optimization levels 0 and 1 only.</admonition>
 
 <Admonition type="caution" title="Important">
-To ensure faster and more efficient results, as of 1 March 2024, circuits and observables need to be transformed to only use instructions supported by the system (referred to as *instruction set architecture (ISA)* circuits and observables) before being submitted to the Qiskit Runtime primitives.  See the [transpilation documentation](../transpile) for instructions to transform circuits.  Due to this change, the primitives will no longer perform layout or routing operations.  Consequently, transpilation options referring to those tasks will no longer have any effect. Users can still request that the primitives do no optimization of input circuits by specifying `optimization_level=0`.
+To ensure faster and more efficient results, as of 1 March 2024, circuits and observables need to be transformed to only use instructions supported by the system (referred to as *instruction set architecture (ISA)* circuits and observables) before being submitted to the Qiskit Runtime primitives.  See the [transpilation documentation](../transpile) for instructions to transform circuits.  Due to this change, the primitives will no longer perform layout or routing operations.  Consequently, transpilation options referring to those tasks will no longer have any effect. By default, all primitives except Sampler V2 still optimize the input circuits. To bypass all optimization, set `optimization_level=0`.
 
 *Exception*: When you initialize the Qiskit Runtime Service with the Q-CTRL channel strategy (example below), abstract circuits are still supported.
 

docs/run/estimate-job-run-time.mdx

@@ -16,7 +16,7 @@ Quantum time is the duration, in seconds, a quantum system is committed to fulfi
 </Admonition>
 
 <Admonition type="caution" title="Important">
-To ensure faster and more efficient results, as of 1 March 2024, circuits and observables need to be transformed to only use instructions supported by the system (referred to as *instruction set architecture (ISA)* circuits and observables) before being submitted to the Qiskit Runtime primitives.  See the [transpilation documentation](../transpile) for instructions to transform circuits.  Due to this change, the primitives will no longer perform layout or routing operations; consequently, transpilation options referring to those tasks will no longer have any effect. Users can still request that the primitives do no optimization of input circuits by specifying `options.transpilation.skip_transpilation`.
+To ensure faster and more efficient results, as of 1 March 2024, circuits and observables need to be transformed to only use instructions supported by the system (referred to as *instruction set architecture (ISA)* circuits and observables) before being submitted to the Qiskit Runtime primitives.  See the [transpilation documentation](../transpile) for instructions to transform circuits.  Due to this change, the primitives will no longer perform layout or routing operations.  Consequently, transpilation options referring to those tasks will no longer have any effect. By default, all primitives except Sampler V2 still optimize the input circuits. To bypass all optimization, set `optimization_level=0`.
 
 *Exception*: When you initialize the Qiskit Runtime Service with the Q-CTRL channel strategy (example below), abstract circuits are still supported.
 

docs/run/primitives-examples.mdx

@@ -9,7 +9,7 @@ description: Practical examples of using primitives in Qiskit Runtime.
 The examples in this section illustrate some common ways to use primitives. Before running these examples, follow the instructions in [Install and set up.](../start/install)
 
 <Admonition type="caution" title="Important">
-To ensure faster and more efficient results, as of 1 March 2024, circuits and observables need to be transformed to only use instructions supported by the system (referred to as *instruction set architecture (ISA)* circuits and observables) before being submitted to the Qiskit Runtime primitives.  See the [transpilation documentation](../transpile) for instructions to transform circuits.  Due to this change, the primitives will no longer perform layout or routing operations.  Consequently, transpilation options referring to those tasks will no longer have any effect. Users can still request that the primitives do no optimization of input circuits by specifying `optimization_level=0`.
+To ensure faster and more efficient results, as of 1 March 2024, circuits and observables need to be transformed to only use instructions supported by the system (referred to as *instruction set architecture (ISA)* circuits and observables) before being submitted to the Qiskit Runtime primitives.  See the [transpilation documentation](../transpile) for instructions to transform circuits.  Due to this change, the primitives will no longer perform layout or routing operations.  Consequently, transpilation options referring to those tasks will no longer have any effect. By default, all primitives except Sampler V2 still optimize the input circuits. To bypass all optimization, set `optimization_level=0`.
 
 *Exception*: When you initialize the Qiskit Runtime Service with the Q-CTRL channel strategy (example below), abstract circuits are still supported.
 

docs/run/primitives-get-started.mdx

@@ -9,7 +9,7 @@ description: How to use the Estimator and Sampler primitives in Qiskit Runtime.
 The steps in this topic describes how to set up primitives, explore the options you can use to configure them, and invoke them in a program.
 
 <Admonition type="caution" title="Important">
-To ensure faster and more efficient results, as of 1 March 2024, circuits and observables need to be transformed to only use instructions supported by the system (referred to as *instruction set architecture (ISA)* circuits and observables) before being submitted to the Qiskit Runtime primitives.  See the [transpilation documentation](../transpile) for instructions to transform circuits.  Due to this change, the primitives will no longer perform layout or routing operations; consequently, transpilation options referring to those tasks will no longer have any effect. Users can still request that the primitives do no optimization of input circuits by specifying `options.transpilation.skip_transpilation`.
+To ensure faster and more efficient results, as of 1 March 2024, circuits and observables need to be transformed to only use instructions supported by the system (referred to as *instruction set architecture (ISA)* circuits and observables) before being submitted to the Qiskit Runtime primitives.  See the [transpilation documentation](../transpile) for instructions to transform circuits.  Due to this change, the primitives will no longer perform layout or routing operations.  Consequently, transpilation options referring to those tasks will no longer have any effect. By default, all primitives except Sampler V2 still optimize the input circuits. To bypass all optimization, set `optimization_level=0`.
 
 *Exception*: When you initialize the Qiskit Runtime Service with the Q-CTRL channel strategy (example below), abstract circuits are still supported.
 

docs/run/primitives.mdx

@@ -36,7 +36,7 @@ Providers like Qiskit Runtime enable access to appropriate systems through nativ
 their own primitives.
 
 <Admonition type="caution" title="Important">
-To ensure faster and more efficient results, as of 1 March 2024, circuits and observables need to be transformed to only use instructions supported by the system (referred to as *instruction set architecture (ISA)* circuits and observables) before being submitted to the Qiskit Runtime primitives.  See the [transpilation documentation](../transpile) for instructions to transform circuits.  Due to this change, the primitives will no longer perform layout or routing operations.  Consequently, transpilation options referring to those tasks will no longer have any effect. Users can still request that the primitives do no optimization of input circuits by specifying `optimization_level=0`.
+To ensure faster and more efficient results, as of 1 March 2024, circuits and observables need to be transformed to only use instructions supported by the system (referred to as *instruction set architecture (ISA)* circuits and observables) before being submitted to the Qiskit Runtime primitives.  See the [transpilation documentation](../transpile) for instructions to transform circuits.  Due to this change, the primitives will no longer perform layout or routing operations.  Consequently, transpilation options referring to those tasks will no longer have any effect. By default, all primitives except Sampler V2 still optimize the input circuits. To bypass all optimization, set `optimization_level=0`.
 
 *Exception*: When you initialize the Qiskit Runtime Service with the Q-CTRL channel strategy (example below), abstract circuits are still supported.
 

docs/start/hello-world.ipynb

@@ -128,7 +128,7 @@
    "metadata": {},
    "source": [
     "<Admonition type=\"note\" title=\"Important\">\n",
-    "  To ensure faster and more efficient results, as of 1 March 2024, circuits and observables need to be transformed to only use instructions supported by the system (referred to as *instruction set architecture (ISA)* circuits and observables) before being submitted to the Qiskit Runtime primitives.  See the [transpilation documentation](../transpile) for instructions to transform circuits.  Due to this change, the primitives will no longer perform layout or routing operations.  Consequently, transpilation options referring to those tasks will no longer have any effect. Users can still request that the primitives do no optimization of input circuits by specifying `optimization_level=0`.\n",
+    "  To ensure faster and more efficient results, as of 1 March 2024, circuits and observables need to be transformed to only use instructions supported by the system (referred to as *instruction set architecture (ISA)* circuits and observables) before being submitted to the Qiskit Runtime primitives.  See the [transpilation documentation](../transpile) for instructions to transform circuits.  Due to this change, the primitives will no longer perform layout or routing operations.  Consequently, transpilation options referring to those tasks will no longer have any effect. By default, all primitives except Sampler V2 still optimize the input circuits. To bypass all optimization, set `optimization_level=0`.\n",
     "\n",
     "*Exception*: When you initialize the Qiskit Runtime Service with the Q-CTRL channel strategy (example below), abstract circuits are still supported.\n",
     "\n",
@@ -316,7 +316,7 @@
    "name": "python",
    "nbconvert_exporter": "python",
    "pygments_lexer": "ipython3",
-   "version": "3"
+   "version": "3.12.2"
   },
   "title": "Hello world",
   "widgets": {