rt-thread/bsp/tm4c129x/libraries/inc/hw_lcd.h

576 lines
32 KiB
C

//*****************************************************************************
//
// hw_lcd.h - Defines and macros used when accessing the LCD controller.
//
// Copyright (c) 2011-2020 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 2.2.0.295 of the Tiva Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_LCD_H__
#define __HW_LCD_H__
//*****************************************************************************
//
// The following are defines for the LCD register offsets.
//
//*****************************************************************************
#define LCD_O_PID 0x00000000 // LCD PID Register Format
#define LCD_O_CTL 0x00000004 // LCD Control
#define LCD_O_LIDDCTL 0x0000000C // LCD LIDD Control
#define LCD_O_LIDDCS0CFG 0x00000010 // LCD LIDD CS0 Configuration
#define LCD_O_LIDDCS0ADDR 0x00000014 // LIDD CS0 Read/Write Address
#define LCD_O_LIDDCS0DATA 0x00000018 // LIDD CS0 Data Read/Write
// Initiation
#define LCD_O_LIDDCS1CFG 0x0000001C // LIDD CS1 Configuration
#define LCD_O_LIDDCS1ADDR 0x00000020 // LIDD CS1 Address Read/Write
// Initiation
#define LCD_O_LIDDCS1DATA 0x00000024 // LIDD CS1 Data Read/Write
// Initiation
#define LCD_O_RASTRCTL 0x00000028 // LCD Raster Control
#define LCD_O_RASTRTIM0 0x0000002C // LCD Raster Timing 0
#define LCD_O_RASTRTIM1 0x00000030 // LCD Raster Timing 1
#define LCD_O_RASTRTIM2 0x00000034 // LCD Raster Timing 2
#define LCD_O_RASTRSUBP1 0x00000038 // LCD Raster Subpanel Display 1
#define LCD_O_RASTRSUBP2 0x0000003C // LCD Raster Subpanel Display 2
#define LCD_O_DMACTL 0x00000040 // LCD DMA Control
#define LCD_O_DMABAFB0 0x00000044 // LCD DMA Frame Buffer 0 Base
// Address
#define LCD_O_DMACAFB0 0x00000048 // LCD DMA Frame Buffer 0 Ceiling
// Address
#define LCD_O_DMABAFB1 0x0000004C // LCD DMA Frame Buffer 1 Base
// Address
#define LCD_O_DMACAFB1 0x00000050 // LCD DMA Frame Buffer 1 Ceiling
// Address
#define LCD_O_SYSCFG 0x00000054 // LCD System Configuration
// Register
#define LCD_O_RISSET 0x00000058 // LCD Interrupt Raw Status and Set
// Register
#define LCD_O_MISCLR 0x0000005C // LCD Interrupt Status and Clear
#define LCD_O_IM 0x00000060 // LCD Interrupt Mask
#define LCD_O_IENC 0x00000064 // LCD Interrupt Enable Clear
#define LCD_O_CLKEN 0x0000006C // LCD Clock Enable
#define LCD_O_CLKRESET 0x00000070 // LCD Clock Resets
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_PID register.
//
//*****************************************************************************
#define LCD_PID_MAJOR_M 0x00000700 // Major Release Number
#define LCD_PID_MINOR_M 0x0000003F // Minor Release Number
#define LCD_PID_MAJOR_S 8
#define LCD_PID_MINOR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_CTL register.
//
//*****************************************************************************
#define LCD_CTL_CLKDIV_M 0x0000FF00 // Clock Divisor
#define LCD_CTL_UFLOWRST 0x00000002 // Underflow Restart
#define LCD_CTL_LCDMODE 0x00000001 // LCD Mode Select
#define LCD_CTL_CLKDIV_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_LIDDCTL register.
//
//*****************************************************************************
#define LCD_LIDDCTL_DMACS 0x00000200 // CS0/CS1 Select for LIDD DMA
// Writes
#define LCD_LIDDCTL_DMAEN 0x00000100 // LIDD DMA Enable
#define LCD_LIDDCTL_CS1E1 0x00000080 // Chip Select 1 (CS1)/Enable 1(E1)
// Polarity Control
#define LCD_LIDDCTL_CS0E0 0x00000040 // Chip Select 0 (CS0)/Enable 0
// (E0) Polarity Control
#define LCD_LIDDCTL_WRDIRINV 0x00000020 // Write Strobe (WR) /Direction
// (DIR) Polarity Control
#define LCD_LIDDCTL_RDEN 0x00000010 // Read Strobe (RD) /Direct Enable
// (EN) Polarity Control
#define LCD_LIDDCTL_ALE 0x00000008 // Address Latch Enable (ALE)
// Polarity Control
#define LCD_LIDDCTL_MODE_M 0x00000007 // LIDD Mode Select
#define LCD_LIDDCTL_MODE_SYNCM68 \
0x00000000 // Synchronous Motorola 6800 Mode
#define LCD_LIDDCTL_MODE_ASYNCM68 \
0x00000001 // Asynchronous Motorola 6800 Mode
#define LCD_LIDDCTL_MODE_SYNCM80 \
0x00000002 // Synchronous Intel 8080 mode
#define LCD_LIDDCTL_MODE_ASYNCM80 \
0x00000003 // Asynchronous Intel 8080 mode
#define LCD_LIDDCTL_MODE_ASYNCHIT \
0x00000004 // Asynchronous Hitachi mode
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_LIDDCS0CFG
// register.
//
//*****************************************************************************
#define LCD_LIDDCS0CFG_WRSU_M 0xF8000000 // Write Strobe (WR) Set-Up Cycles
#define LCD_LIDDCS0CFG_WRDUR_M 0x07E00000 // Write Strobe (WR) Duration
// Cycles
#define LCD_LIDDCS0CFG_WRHOLD_M 0x001E0000 // Write Strobe (WR) Hold cycles
#define LCD_LIDDCS0CFG_RDSU_M 0x0001F000 // Read Strobe (RD) Set-Up cycles
#define LCD_LIDDCS0CFG_RDDUR_M 0x00000FC0 // Read Strobe (RD) Duration cycles
#define LCD_LIDDCS0CFG_RDHOLD_M 0x0000003C // Read Strobe (RD) Hold cycles
#define LCD_LIDDCS0CFG_GAP_M 0x00000003 // Field value defines the number
// of LCDMCLK cycles (GAP +1)
// between the end of one CS0
// (LCDAC) device access and the
// start of another CS0 (LCDAC)
// device access unless the two
// accesses are both reads
#define LCD_LIDDCS0CFG_WRSU_S 27
#define LCD_LIDDCS0CFG_WRDUR_S 21
#define LCD_LIDDCS0CFG_WRHOLD_S 17
#define LCD_LIDDCS0CFG_RDSU_S 12
#define LCD_LIDDCS0CFG_RDDUR_S 6
#define LCD_LIDDCS0CFG_RDHOLD_S 2
#define LCD_LIDDCS0CFG_GAP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_LIDDCS0ADDR
// register.
//
//*****************************************************************************
#define LCD_LIDDCS0ADDR_CS0ADDR_M \
0x0000FFFF // LCD Address
#define LCD_LIDDCS0ADDR_CS0ADDR_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_LIDDCS0DATA
// register.
//
//*****************************************************************************
#define LCD_LIDDCS0DATA_CS0DATA_M \
0x0000FFFF // LCD Data Read/Write
#define LCD_LIDDCS0DATA_CS0DATA_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_LIDDCS1CFG
// register.
//
//*****************************************************************************
#define LCD_LIDDCS1CFG_WRSU_M 0xF8000000 // Write Strobe (WR) Set-Up Cycles
#define LCD_LIDDCS1CFG_WRDUR_M 0x07E00000 // Write Strobe (WR) Duration
// Cycles
#define LCD_LIDDCS1CFG_WRHOLD_M 0x001E0000 // Write Strobe (WR) Hold cycles
#define LCD_LIDDCS1CFG_RDSU_M 0x0001F000 // Read Strobe (RD) Set-Up cycles
#define LCD_LIDDCS1CFG_RDDUR_M 0x00000FC0 // Read Strobe (RD) Duration cycles
#define LCD_LIDDCS1CFG_RDHOLD_M 0x0000003C // Read Strobe (RD) Hold cycles
#define LCD_LIDDCS1CFG_GAP_M 0x00000003 // Field value defines the number
// of LCDMCLK cycles (GAP + 1)
// between the end of one CS1
// (LCDAC) device access and the
// start of another CS0 (LCDAC)
// device access unless the two
// accesses are both reads
#define LCD_LIDDCS1CFG_WRSU_S 27
#define LCD_LIDDCS1CFG_WRDUR_S 21
#define LCD_LIDDCS1CFG_WRHOLD_S 17
#define LCD_LIDDCS1CFG_RDSU_S 12
#define LCD_LIDDCS1CFG_RDDUR_S 6
#define LCD_LIDDCS1CFG_RDHOLD_S 2
#define LCD_LIDDCS1CFG_GAP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_LIDDCS1ADDR
// register.
//
//*****************************************************************************
#define LCD_LIDDCS1ADDR_CS1ADDR_M \
0x0000FFFF // LCD Address Bus
#define LCD_LIDDCS1ADDR_CS1ADDR_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_LIDDCS1DATA
// register.
//
//*****************************************************************************
#define LCD_LIDDCS1DATA_CS0DATA_M \
0x0000FFFF // LCD Data Read/Write Initiation
#define LCD_LIDDCS1DATA_CS0DATA_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_RASTRCTL register.
//
//*****************************************************************************
#define LCD_RASTRCTL_TFT24UPCK 0x04000000 // 24-bit TFT Mode Packing
#define LCD_RASTRCTL_TFT24 0x02000000 // 24-Bit TFT Mode
#define LCD_RASTRCTL_FRMBUFSZ 0x01000000 // Frame Buffer Select
#define LCD_RASTRCTL_TFTMAP 0x00800000 // TFT Mode Alternate Signal
// Mapping for Palettized
// Framebuffer
#define LCD_RASTRCTL_NIBMODE 0x00400000 // Nibble Mode
#define LCD_RASTRCTL_PALMODE_M 0x00300000 // Pallette Loading Mode
#define LCD_RASTRCTL_PALMODE_PALDAT \
0x00000000 // Palette and data loading, reset
// value
#define LCD_RASTRCTL_PALMODE_PAL \
0x00100000 // Palette loading only
#define LCD_RASTRCTL_PALMODE_DAT \
0x00200000 // Data loading only
#define LCD_RASTRCTL_REQDLY_M 0x000FF000 // Palette Loading Delay
#define LCD_RASTRCTL_MONO8B 0x00000200 // Mono 8-Bit
#define LCD_RASTRCTL_RDORDER 0x00000100 // Raster Data Order Select
#define LCD_RASTRCTL_LCDTFT 0x00000080 // LCD TFT
#define LCD_RASTRCTL_LCDBW 0x00000002 // LCD Monochrome
#define LCD_RASTRCTL_LCDEN 0x00000001 // LCD Controller Enable for Raster
// Operations
#define LCD_RASTRCTL_REQDLY_S 12
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_RASTRTIM0
// register.
//
//*****************************************************************************
#define LCD_RASTRTIM0_HBP_M 0xFF000000 // Horizontal Back Porch Lowbits
#define LCD_RASTRTIM0_HFP_M 0x00FF0000 // Horizontal Front Porch Lowbits
#define LCD_RASTRTIM0_HSW_M 0x0000FC00 // Horizontal Sync Pulse Width
// Lowbits
#define LCD_RASTRTIM0_PPL_M 0x000003F0 // Pixels-per-line LSB[9:4]
#define LCD_RASTRTIM0_MSBPPL 0x00000008 // Pixels-per-line MSB[10]
#define LCD_RASTRTIM0_HBP_S 24
#define LCD_RASTRTIM0_HFP_S 16
#define LCD_RASTRTIM0_HSW_S 10
#define LCD_RASTRTIM0_PPL_S 4
#define LCD_RASTRTIM0_MSBPPL_S 3
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_RASTRTIM1
// register.
//
//*****************************************************************************
#define LCD_RASTRTIM1_VBP_M 0xFF000000 // Vertical Back Porch
#define LCD_RASTRTIM1_VFP_M 0x00FF0000 // Vertical Front Porch
#define LCD_RASTRTIM1_VSW_M 0x0000FC00 // Vertical Sync Width Pulse
#define LCD_RASTRTIM1_LPP_M 0x000003FF // Lines Per Panel
#define LCD_RASTRTIM1_VBP_S 24
#define LCD_RASTRTIM1_VFP_S 16
#define LCD_RASTRTIM1_VSW_S 10
#define LCD_RASTRTIM1_LPP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_RASTRTIM2
// register.
//
//*****************************************************************************
#define LCD_RASTRTIM2_HSW_M 0x78000000 // Bits 9:6 of the horizontal sync
// width field
#define LCD_RASTRTIM2_MSBLPP 0x04000000 // MSB of Lines Per Panel
#define LCD_RASTRTIM2_PXLCLKCTL 0x02000000 // Hsync/Vsync Pixel Clock Control
// On/Off
#define LCD_RASTRTIM2_PSYNCRF 0x01000000 // Program HSYNC/VSYNC Rise or Fall
#define LCD_RASTRTIM2_INVOE 0x00800000 // Invert Output Enable
#define LCD_RASTRTIM2_INVPXLCLK 0x00400000 // Invert Pixel Clock
#define LCD_RASTRTIM2_IHS 0x00200000 // Invert Hysync
#define LCD_RASTRTIM2_IVS 0x00100000 // Invert Vsync
#define LCD_RASTRTIM2_ACBI_M 0x000F0000 // AC Bias Pins Transitions per
// Interrupt
#define LCD_RASTRTIM2_ACBF_M 0x0000FF00 // AC Bias Pin Frequency
#define LCD_RASTRTIM2_MSBHBP_M 0x00000030 // Bits 9:8 of the horizontal back
// porch field
#define LCD_RASTRTIM2_MSBHFP_M 0x00000003 // Bits 9:8 of the horizontal front
// porch field
#define LCD_RASTRTIM2_HSW_S 27
#define LCD_RASTRTIM2_MSBLPP_S 26
#define LCD_RASTRTIM2_ACBI_S 16
#define LCD_RASTRTIM2_ACBF_S 8
#define LCD_RASTRTIM2_MSBHBP_S 4
#define LCD_RASTRTIM2_MSBHFP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_RASTRSUBP1
// register.
//
//*****************************************************************************
#define LCD_RASTRSUBP1_SPEN 0x80000000 // Sub Panel Enable
#define LCD_RASTRSUBP1_HOLS 0x20000000 // High or Low Signal
#define LCD_RASTRSUBP1_LPPT_M 0x03FF0000 // Line Per Panel Threshold
#define LCD_RASTRSUBP1_DPDLSB_M 0x0000FFFF // Default Pixel Data LSB[15:0]
#define LCD_RASTRSUBP1_LPPT_S 16
#define LCD_RASTRSUBP1_DPDLSB_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_RASTRSUBP2
// register.
//
//*****************************************************************************
#define LCD_RASTRSUBP2_LPPTMSB 0x00000100 // Lines Per Panel Threshold Bit 10
#define LCD_RASTRSUBP2_DPDMSB_M 0x000000FF // Default Pixel Data MSB [23:16]
#define LCD_RASTRSUBP2_DPDMSB_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_DMACTL register.
//
//*****************************************************************************
#define LCD_DMACTL_FIFORDY_M 0x00000700 // DMA FIFO threshold
#define LCD_DMACTL_FIFORDY_8 0x00000000 // 8 words
#define LCD_DMACTL_FIFORDY_16 0x00000100 // 16 words
#define LCD_DMACTL_FIFORDY_32 0x00000200 // 32 words
#define LCD_DMACTL_FIFORDY_64 0x00000300 // 64 words
#define LCD_DMACTL_FIFORDY_128 0x00000400 // 128 words
#define LCD_DMACTL_FIFORDY_256 0x00000500 // 256 words
#define LCD_DMACTL_FIFORDY_512 0x00000600 // 512 words
#define LCD_DMACTL_BURSTSZ_M 0x00000070 // Burst Size setting for DMA
// transfers (all DMA transfers are
// 32 bits wide):
#define LCD_DMACTL_BURSTSZ_4 0x00000020 // burst size of 4
#define LCD_DMACTL_BURSTSZ_8 0x00000030 // burst size of 8
#define LCD_DMACTL_BURSTSZ_16 0x00000040 // burst size of 16
#define LCD_DMACTL_BYTESWAP 0x00000008 // This bit controls the bytelane
// ordering of the data on the
// output of the DMA module
#define LCD_DMACTL_BIGDEND 0x00000002 // Big Endian Enable
#define LCD_DMACTL_FMODE 0x00000001 // Frame Mode
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_DMABAFB0 register.
//
//*****************************************************************************
#define LCD_DMABAFB0_FB0BA_M 0xFFFFFFFC // Frame Buffer 0 Base Address
// pointer
#define LCD_DMABAFB0_FB0BA_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_DMACAFB0 register.
//
//*****************************************************************************
#define LCD_DMACAFB0_FB0CA_M 0xFFFFFFFC // Frame Buffer 0 Ceiling Address
// pointer
#define LCD_DMACAFB0_FB0CA_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_DMABAFB1 register.
//
//*****************************************************************************
#define LCD_DMABAFB1_FB1BA_M 0xFFFFFFFC // Frame Buffer 1 Base Address
// pointer
#define LCD_DMABAFB1_FB1BA_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_DMACAFB1 register.
//
//*****************************************************************************
#define LCD_DMACAFB1_FB1CA_M 0xFFFFFFFC // Frame Buffer 1 Ceiling Address
// pointer
#define LCD_DMACAFB1_FB1CA_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_SYSCFG register.
//
//*****************************************************************************
#define LCD_SYSCFG_STDBY_M 0x00000030 // Standby Mode
#define LCD_SYSCFG_STDBY_FORCE 0x00000000 // Force-standby mode: local
// initiator is unconditionally
// placed in standby state. Backup
// mode, for debug only
#define LCD_SYSCFG_STDBY_NONE 0x00000010 // No-standby mode: local initiator
// is unconditionally placed out of
// standby state. Backup mode, for
// debug only
#define LCD_SYSCFG_STDBY_SMART 0x00000020 // Smart-standby mode: local
// initiator standby status depends
// on local conditions, that is,
// the module's functional
// requirement from the initiator.
// IP module shall not generate
// (initiator-related) wakeup
// events
#define LCD_SYSCFG_IDLEMODE_M 0x0000000C // Idle Mode
#define LCD_SYSCFG_IDLEMODE_FORCE \
0x00000000 // Force-idle mode: local target's
// idle state follows
// (acknowledges) the system's idle
// requests unconditionally, that
// is, regardless of the IP
// module's internal requirements.
// Backup mode, for debug only
#define LCD_SYSCFG_IDLEMODE_NONE \
0x00000004 // No-idle mode: local target never
// enters idle state. Backup mode,
// for debug only
#define LCD_SYSCFG_IDLEMODE_SMART \
0x00000008 // Smart-idle mode: local target's
// idle state eventually follows
// (acknowledges) the system's idle
// requests, depending on the IP
// module's internal requirements.
// IP module shall not generate
// (IRQ- or DMA-requestrelated)
// wakeup events
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_RISSET register.
//
//*****************************************************************************
#define LCD_RISSET_EOF1 0x00000200 // DMA End-of-Frame 1 Raw Interrupt
// Status and Set
#define LCD_RISSET_EOF0 0x00000100 // DMA End-of-Frame 0 Raw Interrupt
// Status and Set
#define LCD_RISSET_PALLOAD 0x00000040 // DMA Palette Loaded Raw Interrupt
// Status and Set
#define LCD_RISSET_FIFOU 0x00000020 // DMA FIFO Underflow Raw Interrupt
// Status and Set
#define LCD_RISSET_ACBS 0x00000008 // AC Bias Count Raw Interrupt
// Status and Set
#define LCD_RISSET_SYNCS 0x00000004 // Frame Synchronization Lost Raw
// Interrupt Status and Set
#define LCD_RISSET_RRASTRDONE 0x00000002 // Raster Mode Frame Done interrupt
#define LCD_RISSET_DONE 0x00000001 // Raster or LIDD Frame Done
// (shared, depends on whether
// Raster or LIDD mode enabled) Raw
// Interrupt Status and Set
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_MISCLR register.
//
//*****************************************************************************
#define LCD_MISCLR_EOF1 0x00000200 // DMA End-of-Frame 1 Enabled
// Interrupt and Clear
#define LCD_MISCLR_EOF0 0x00000100 // DMA End-of-Frame 0 Raw Interrupt
// and Clear
#define LCD_MISCLR_PALLOAD 0x00000040 // DMA Palette Loaded Enabled
// Interrupt and Clear
#define LCD_MISCLR_FIFOU 0x00000020 // DMA FIFO Underflow Enabled
// Interrupt and Clear
#define LCD_MISCLR_ACBS 0x00000008 // AC Bias Count Enabled Interrupt
// and Clear
#define LCD_MISCLR_SYNCS 0x00000004 // Frame Synchronization Lost
// Enabled Interrupt and Clear
#define LCD_MISCLR_RRASTRDONE 0x00000002 // Raster Mode Frame Done interrupt
#define LCD_MISCLR_DONE 0x00000001 // Raster or LIDD Frame Done
// (shared, depends on whether
// Raster or LIDD mode enabled)
// Enabled Interrupt and Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_IM register.
//
//*****************************************************************************
#define LCD_IM_EOF1 0x00000200 // DMA End-of-Frame 1 Interrupt
// Enable Set
#define LCD_IM_EOF0 0x00000100 // DMA End-of-Frame 0 Interrupt
// Enable Set
#define LCD_IM_PALLOAD 0x00000040 // DMA Palette Loaded Interrupt
// Enable Set
#define LCD_IM_FIFOU 0x00000020 // DMA FIFO Underflow Interrupt
// Enable Set
#define LCD_IM_ACBS 0x00000008 // AC Bias Count Interrupt Enable
// Set
#define LCD_IM_SYNCS 0x00000004 // Frame Synchronization Lost
// Interrupt Enable Set
#define LCD_IM_RRASTRDONE 0x00000002 // Raster Mode Frame Done Interrupt
// Enable Set
#define LCD_IM_DONE 0x00000001 // Raster or LIDD Frame Done
// (shared, depends on whether
// Raster or LIDD mode enabled)
// Interrupt Enable Set
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_IENC register.
//
//*****************************************************************************
#define LCD_IENC_EOF1 0x00000200 // DMA End-of-Frame 1 Interrupt
// Enable Clear
#define LCD_IENC_EOF0 0x00000100 // DMA End-of-Frame 0 Interrupt
// Enable Clear
#define LCD_IENC_PALLOAD 0x00000040 // DMA Palette Loaded Interrupt
// Enable Clear
#define LCD_IENC_FIFOU 0x00000020 // DMA FIFO Underflow Interrupt
// Enable Clear
#define LCD_IENC_ACBS 0x00000008 // AC Bias Count Interrupt Enable
// Clear
#define LCD_IENC_SYNCS 0x00000004 // Frame Synchronization Lost
// Interrupt Enable Clear
#define LCD_IENC_RRASTRDONE 0x00000002 // Raster Mode Frame Done Interrupt
// Enable Clear
#define LCD_IENC_DONE 0x00000001 // Raster or LIDD Frame Done
// (shared, depends on whether
// Raster or LIDD mode enabled)
// Interrupt Enable Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_CLKEN register.
//
//*****************************************************************************
#define LCD_CLKEN_DMA 0x00000004 // DMA Clock Enable
#define LCD_CLKEN_LIDD 0x00000002 // LIDD Submodule Clock Enable
#define LCD_CLKEN_CORE 0x00000001 // LCD Core Clock Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the LCD_O_CLKRESET register.
//
//*****************************************************************************
#define LCD_CLKRESET_MAIN 0x00000008 // Software Reset for the entire
// LCD module
#define LCD_CLKRESET_DMA 0x00000004 // Software Reset for the DMA
// submodule
#define LCD_CLKRESET_LIDD 0x00000002 // Software Reset for the LIDD
// submodule (character displays)
#define LCD_CLKRESET_CORE 0x00000001 // Software Reset for the Core,
// which encompasses the Raster
// Active Matrix and Passive Matrix
// logic
#endif // __HW_LCD_H__