2013-01-08 22:40:58 +08:00
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// hw_uart.h - Macros and defines used when accessing the UART hardware.
|
|
|
|
|
//
|
|
|
|
|
// Copyright (c) 2005-2011 Texas Instruments Incorporated. All rights reserved.
|
|
|
|
|
// Software License Agreement
|
|
|
|
|
//
|
|
|
|
|
// Texas Instruments (TI) is supplying this software for use solely and
|
|
|
|
|
// exclusively on TI's microcontroller products. The software is owned by
|
|
|
|
|
// TI and/or its suppliers, and is protected under applicable copyright
|
|
|
|
|
// laws. You may not combine this software with "viral" open-source
|
|
|
|
|
// software in order to form a larger program.
|
|
|
|
|
//
|
|
|
|
|
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
|
|
|
|
|
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
|
|
|
|
|
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
|
|
|
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
|
|
|
|
|
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
|
|
|
|
|
// DAMAGES, FOR ANY REASON WHATSOEVER.
|
|
|
|
|
//
|
|
|
|
|
// This is part of revision 8264 of the Stellaris Firmware Development Package.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
|
|
|
|
|
#ifndef __HW_UART_H__
|
|
|
|
|
#define __HW_UART_H__
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the UART register offsets.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_O_DR 0x00000000 // UART Data
|
|
|
|
|
#define UART_O_RSR 0x00000004 // UART Receive Status/Error Clear
|
|
|
|
|
#define UART_O_ECR 0x00000004 // UART Receive Status/Error Clear
|
|
|
|
|
#define UART_O_FR 0x00000018 // UART Flag
|
|
|
|
|
#define UART_O_ILPR 0x00000020 // UART IrDA Low-Power Register
|
|
|
|
|
#define UART_O_IBRD 0x00000024 // UART Integer Baud-Rate Divisor
|
|
|
|
|
#define UART_O_FBRD 0x00000028 // UART Fractional Baud-Rate
|
|
|
|
|
// Divisor
|
|
|
|
|
#define UART_O_LCRH 0x0000002C // UART Line Control
|
|
|
|
|
#define UART_O_CTL 0x00000030 // UART Control
|
|
|
|
|
#define UART_O_IFLS 0x00000034 // UART Interrupt FIFO Level Select
|
|
|
|
|
#define UART_O_IM 0x00000038 // UART Interrupt Mask
|
|
|
|
|
#define UART_O_RIS 0x0000003C // UART Raw Interrupt Status
|
|
|
|
|
#define UART_O_MIS 0x00000040 // UART Masked Interrupt Status
|
|
|
|
|
#define UART_O_ICR 0x00000044 // UART Interrupt Clear
|
|
|
|
|
#define UART_O_DMACTL 0x00000048 // UART DMA Control
|
|
|
|
|
#define UART_O_LCTL 0x00000090 // UART LIN Control
|
|
|
|
|
#define UART_O_LSS 0x00000094 // UART LIN Snap Shot
|
|
|
|
|
#define UART_O_LTIM 0x00000098 // UART LIN Timer
|
|
|
|
|
#define UART_O_9BITADDR 0x000000A4 // UART 9-Bit Self Address
|
|
|
|
|
#define UART_O_9BITAMASK 0x000000A8 // UART 9-Bit Self Address Mask
|
|
|
|
|
#define UART_O_PP 0x00000FC0 // UART Peripheral Properties
|
|
|
|
|
#define UART_O_CC 0x00000FC8 // UART Clock Configuration
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_DR register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_DR_OE 0x00000800 // UART Overrun Error
|
|
|
|
|
#define UART_DR_BE 0x00000400 // UART Break Error
|
|
|
|
|
#define UART_DR_PE 0x00000200 // UART Parity Error
|
|
|
|
|
#define UART_DR_FE 0x00000100 // UART Framing Error
|
|
|
|
|
#define UART_DR_DATA_M 0x000000FF // Data Transmitted or Received
|
|
|
|
|
#define UART_DR_DATA_S 0
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_RSR register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_RSR_OE 0x00000008 // UART Overrun Error
|
|
|
|
|
#define UART_RSR_BE 0x00000004 // UART Break Error
|
|
|
|
|
#define UART_RSR_PE 0x00000002 // UART Parity Error
|
|
|
|
|
#define UART_RSR_FE 0x00000001 // UART Framing Error
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_ECR register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_ECR_DATA_M 0x000000FF // Error Clear
|
|
|
|
|
#define UART_ECR_DATA_S 0
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_FR register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_FR_RI 0x00000100 // Ring Indicator
|
|
|
|
|
#define UART_FR_TXFE 0x00000080 // UART Transmit FIFO Empty
|
|
|
|
|
#define UART_FR_RXFF 0x00000040 // UART Receive FIFO Full
|
|
|
|
|
#define UART_FR_TXFF 0x00000020 // UART Transmit FIFO Full
|
|
|
|
|
#define UART_FR_RXFE 0x00000010 // UART Receive FIFO Empty
|
|
|
|
|
#define UART_FR_BUSY 0x00000008 // UART Busy
|
|
|
|
|
#define UART_FR_DCD 0x00000004 // Data Carrier Detect
|
|
|
|
|
#define UART_FR_DSR 0x00000002 // Data Set Ready
|
|
|
|
|
#define UART_FR_CTS 0x00000001 // Clear To Send
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_ILPR register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_ILPR_ILPDVSR_M 0x000000FF // IrDA Low-Power Divisor
|
|
|
|
|
#define UART_ILPR_ILPDVSR_S 0
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_IBRD register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_IBRD_DIVINT_M 0x0000FFFF // Integer Baud-Rate Divisor
|
|
|
|
|
#define UART_IBRD_DIVINT_S 0
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_FBRD register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_FBRD_DIVFRAC_M 0x0000003F // Fractional Baud-Rate Divisor
|
|
|
|
|
#define UART_FBRD_DIVFRAC_S 0
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_LCRH register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_LCRH_SPS 0x00000080 // UART Stick Parity Select
|
|
|
|
|
#define UART_LCRH_WLEN_M 0x00000060 // UART Word Length
|
|
|
|
|
#define UART_LCRH_WLEN_5 0x00000000 // 5 bits (default)
|
|
|
|
|
#define UART_LCRH_WLEN_6 0x00000020 // 6 bits
|
|
|
|
|
#define UART_LCRH_WLEN_7 0x00000040 // 7 bits
|
|
|
|
|
#define UART_LCRH_WLEN_8 0x00000060 // 8 bits
|
|
|
|
|
#define UART_LCRH_FEN 0x00000010 // UART Enable FIFOs
|
|
|
|
|
#define UART_LCRH_STP2 0x00000008 // UART Two Stop Bits Select
|
|
|
|
|
#define UART_LCRH_EPS 0x00000004 // UART Even Parity Select
|
|
|
|
|
#define UART_LCRH_PEN 0x00000002 // UART Parity Enable
|
|
|
|
|
#define UART_LCRH_BRK 0x00000001 // UART Send Break
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_CTL register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_CTL_CTSEN 0x00008000 // Enable Clear To Send
|
|
|
|
|
#define UART_CTL_RTSEN 0x00004000 // Enable Request to Send
|
|
|
|
|
#define UART_CTL_RTS 0x00000800 // Request to Send
|
|
|
|
|
#define UART_CTL_DTR 0x00000400 // Data Terminal Ready
|
|
|
|
|
#define UART_CTL_RXE 0x00000200 // UART Receive Enable
|
|
|
|
|
#define UART_CTL_TXE 0x00000100 // UART Transmit Enable
|
|
|
|
|
#define UART_CTL_LBE 0x00000080 // UART Loop Back Enable
|
|
|
|
|
#define UART_CTL_LIN 0x00000040 // LIN Mode Enable
|
|
|
|
|
#define UART_CTL_HSE 0x00000020 // High-Speed Enable
|
|
|
|
|
#define UART_CTL_EOT 0x00000010 // End of Transmission
|
|
|
|
|
#define UART_CTL_SMART 0x00000008 // ISO 7816 Smart Card Support
|
|
|
|
|
#define UART_CTL_SIRLP 0x00000004 // UART SIR Low-Power Mode
|
|
|
|
|
#define UART_CTL_SIREN 0x00000002 // UART SIR Enable
|
|
|
|
|
#define UART_CTL_UARTEN 0x00000001 // UART Enable
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_IFLS register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_IFLS_RX_M 0x00000038 // UART Receive Interrupt FIFO
|
|
|
|
|
// Level Select
|
|
|
|
|
#define UART_IFLS_RX1_8 0x00000000 // RX FIFO >= 1/8 full
|
|
|
|
|
#define UART_IFLS_RX2_8 0x00000008 // RX FIFO >= 1/4 full
|
|
|
|
|
#define UART_IFLS_RX4_8 0x00000010 // RX FIFO >= 1/2 full (default)
|
|
|
|
|
#define UART_IFLS_RX6_8 0x00000018 // RX FIFO >= 3/4 full
|
|
|
|
|
#define UART_IFLS_RX7_8 0x00000020 // RX FIFO >= 7/8 full
|
|
|
|
|
#define UART_IFLS_TX_M 0x00000007 // UART Transmit Interrupt FIFO
|
|
|
|
|
// Level Select
|
|
|
|
|
#define UART_IFLS_TX1_8 0x00000000 // TX FIFO <= 1/8 full
|
|
|
|
|
#define UART_IFLS_TX2_8 0x00000001 // TX FIFO <= 1/4 full
|
|
|
|
|
#define UART_IFLS_TX4_8 0x00000002 // TX FIFO <= 1/2 full (default)
|
|
|
|
|
#define UART_IFLS_TX6_8 0x00000003 // TX FIFO <= 3/4 full
|
|
|
|
|
#define UART_IFLS_TX7_8 0x00000004 // TX FIFO <= 7/8 full
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_IM register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_IM_LME5IM 0x00008000 // LIN Mode Edge 5 Interrupt Mask
|
|
|
|
|
#define UART_IM_LME1IM 0x00004000 // LIN Mode Edge 1 Interrupt Mask
|
|
|
|
|
#define UART_IM_LMSBIM 0x00002000 // LIN Mode Sync Break Interrupt
|
|
|
|
|
// Mask
|
|
|
|
|
#define UART_IM_9BITIM 0x00001000 // 9-Bit Mode Interrupt Mask
|
|
|
|
|
#define UART_IM_OEIM 0x00000400 // UART Overrun Error Interrupt
|
|
|
|
|
// Mask
|
|
|
|
|
#define UART_IM_BEIM 0x00000200 // UART Break Error Interrupt Mask
|
|
|
|
|
#define UART_IM_PEIM 0x00000100 // UART Parity Error Interrupt Mask
|
|
|
|
|
#define UART_IM_FEIM 0x00000080 // UART Framing Error Interrupt
|
|
|
|
|
// Mask
|
|
|
|
|
#define UART_IM_RTIM 0x00000040 // UART Receive Time-Out Interrupt
|
|
|
|
|
// Mask
|
|
|
|
|
#define UART_IM_TXIM 0x00000020 // UART Transmit Interrupt Mask
|
|
|
|
|
#define UART_IM_RXIM 0x00000010 // UART Receive Interrupt Mask
|
|
|
|
|
#define UART_IM_DSRMIM 0x00000008 // UART Data Set Ready Modem
|
|
|
|
|
// Interrupt Mask
|
|
|
|
|
#define UART_IM_DCDMIM 0x00000004 // UART Data Carrier Detect Modem
|
|
|
|
|
// Interrupt Mask
|
|
|
|
|
#define UART_IM_CTSMIM 0x00000002 // UART Clear to Send Modem
|
|
|
|
|
// Interrupt Mask
|
|
|
|
|
#define UART_IM_RIMIM 0x00000001 // UART Ring Indicator Modem
|
|
|
|
|
// Interrupt Mask
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_RIS register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_RIS_LME5RIS 0x00008000 // LIN Mode Edge 5 Raw Interrupt
|
|
|
|
|
// Status
|
|
|
|
|
#define UART_RIS_LME1RIS 0x00004000 // LIN Mode Edge 1 Raw Interrupt
|
|
|
|
|
// Status
|
|
|
|
|
#define UART_RIS_LMSBRIS 0x00002000 // LIN Mode Sync Break Raw
|
|
|
|
|
// Interrupt Status
|
|
|
|
|
#define UART_RIS_9BITRIS 0x00001000 // 9-Bit Mode Raw Interrupt Status
|
|
|
|
|
#define UART_RIS_OERIS 0x00000400 // UART Overrun Error Raw Interrupt
|
|
|
|
|
// Status
|
|
|
|
|
#define UART_RIS_BERIS 0x00000200 // UART Break Error Raw Interrupt
|
|
|
|
|
// Status
|
|
|
|
|
#define UART_RIS_PERIS 0x00000100 // UART Parity Error Raw Interrupt
|
|
|
|
|
// Status
|
|
|
|
|
#define UART_RIS_FERIS 0x00000080 // UART Framing Error Raw Interrupt
|
|
|
|
|
// Status
|
|
|
|
|
#define UART_RIS_RTRIS 0x00000040 // UART Receive Time-Out Raw
|
|
|
|
|
// Interrupt Status
|
|
|
|
|
#define UART_RIS_TXRIS 0x00000020 // UART Transmit Raw Interrupt
|
|
|
|
|
// Status
|
|
|
|
|
#define UART_RIS_RXRIS 0x00000010 // UART Receive Raw Interrupt
|
|
|
|
|
// Status
|
|
|
|
|
#define UART_RIS_DSRRIS 0x00000008 // UART Data Set Ready Modem Raw
|
|
|
|
|
// Interrupt Status
|
|
|
|
|
#define UART_RIS_DCDRIS 0x00000004 // UART Data Carrier Detect Modem
|
|
|
|
|
// Raw Interrupt Status
|
|
|
|
|
#define UART_RIS_CTSRIS 0x00000002 // UART Clear to Send Modem Raw
|
|
|
|
|
// Interrupt Status
|
|
|
|
|
#define UART_RIS_RIRIS 0x00000001 // UART Ring Indicator Modem Raw
|
|
|
|
|
// Interrupt Status
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_MIS register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_MIS_LME5MIS 0x00008000 // LIN Mode Edge 5 Masked Interrupt
|
|
|
|
|
// Status
|
|
|
|
|
#define UART_MIS_LME1MIS 0x00004000 // LIN Mode Edge 1 Masked Interrupt
|
|
|
|
|
// Status
|
|
|
|
|
#define UART_MIS_LMSBMIS 0x00002000 // LIN Mode Sync Break Masked
|
|
|
|
|
// Interrupt Status
|
|
|
|
|
#define UART_MIS_9BITMIS 0x00001000 // 9-Bit Mode Masked Interrupt
|
|
|
|
|
// Status
|
|
|
|
|
#define UART_MIS_OEMIS 0x00000400 // UART Overrun Error Masked
|
|
|
|
|
// Interrupt Status
|
|
|
|
|
#define UART_MIS_BEMIS 0x00000200 // UART Break Error Masked
|
|
|
|
|
// Interrupt Status
|
|
|
|
|
#define UART_MIS_PEMIS 0x00000100 // UART Parity Error Masked
|
|
|
|
|
// Interrupt Status
|
|
|
|
|
#define UART_MIS_FEMIS 0x00000080 // UART Framing Error Masked
|
|
|
|
|
// Interrupt Status
|
|
|
|
|
#define UART_MIS_RTMIS 0x00000040 // UART Receive Time-Out Masked
|
|
|
|
|
// Interrupt Status
|
|
|
|
|
#define UART_MIS_TXMIS 0x00000020 // UART Transmit Masked Interrupt
|
|
|
|
|
// Status
|
|
|
|
|
#define UART_MIS_RXMIS 0x00000010 // UART Receive Masked Interrupt
|
|
|
|
|
// Status
|
|
|
|
|
#define UART_MIS_DSRMIS 0x00000008 // UART Data Set Ready Modem Masked
|
|
|
|
|
// Interrupt Status
|
|
|
|
|
#define UART_MIS_DCDMIS 0x00000004 // UART Data Carrier Detect Modem
|
|
|
|
|
// Masked Interrupt Status
|
|
|
|
|
#define UART_MIS_CTSMIS 0x00000002 // UART Clear to Send Modem Masked
|
|
|
|
|
// Interrupt Status
|
|
|
|
|
#define UART_MIS_RIMIS 0x00000001 // UART Ring Indicator Modem Masked
|
|
|
|
|
// Interrupt Status
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_ICR register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_ICR_LME5IC 0x00008000 // LIN Mode Edge 5 Interrupt Clear
|
|
|
|
|
#define UART_ICR_LME1IC 0x00004000 // LIN Mode Edge 1 Interrupt Clear
|
|
|
|
|
#define UART_ICR_LMSBIC 0x00002000 // LIN Mode Sync Break Interrupt
|
|
|
|
|
// Clear
|
|
|
|
|
#define UART_ICR_9BITIC 0x00001000 // 9-Bit Mode Interrupt Clear
|
|
|
|
|
#define UART_ICR_OEIC 0x00000400 // Overrun Error Interrupt Clear
|
|
|
|
|
#define UART_ICR_BEIC 0x00000200 // Break Error Interrupt Clear
|
|
|
|
|
#define UART_ICR_PEIC 0x00000100 // Parity Error Interrupt Clear
|
|
|
|
|
#define UART_ICR_FEIC 0x00000080 // Framing Error Interrupt Clear
|
|
|
|
|
#define UART_ICR_RTIC 0x00000040 // Receive Time-Out Interrupt Clear
|
|
|
|
|
#define UART_ICR_TXIC 0x00000020 // Transmit Interrupt Clear
|
|
|
|
|
#define UART_ICR_RXIC 0x00000010 // Receive Interrupt Clear
|
|
|
|
|
#define UART_ICR_DSRMIC 0x00000008 // UART Data Set Ready Modem
|
|
|
|
|
// Interrupt Clear
|
|
|
|
|
#define UART_ICR_DCDMIC 0x00000004 // UART Data Carrier Detect Modem
|
|
|
|
|
// Interrupt Clear
|
|
|
|
|
#define UART_ICR_CTSMIC 0x00000002 // UART Clear to Send Modem
|
|
|
|
|
// Interrupt Clear
|
|
|
|
|
#define UART_ICR_RIMIC 0x00000001 // UART Ring Indicator Modem
|
|
|
|
|
// Interrupt Clear
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_DMACTL register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_DMACTL_DMAERR 0x00000004 // DMA on Error
|
|
|
|
|
#define UART_DMACTL_TXDMAE 0x00000002 // Transmit DMA Enable
|
|
|
|
|
#define UART_DMACTL_RXDMAE 0x00000001 // Receive DMA Enable
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_LCTL register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_LCTL_BLEN_M 0x00000030 // Sync Break Length
|
|
|
|
|
#define UART_LCTL_BLEN_13T 0x00000000 // Sync break length is 13T bits
|
|
|
|
|
// (default)
|
|
|
|
|
#define UART_LCTL_BLEN_14T 0x00000010 // Sync break length is 14T bits
|
|
|
|
|
#define UART_LCTL_BLEN_15T 0x00000020 // Sync break length is 15T bits
|
|
|
|
|
#define UART_LCTL_BLEN_16T 0x00000030 // Sync break length is 16T bits
|
|
|
|
|
#define UART_LCTL_MASTER 0x00000001 // LIN Master Enable
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_LSS register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_LSS_TSS_M 0x0000FFFF // Timer Snap Shot
|
|
|
|
|
#define UART_LSS_TSS_S 0
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_LTIM register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_LTIM_TIMER_M 0x0000FFFF // Timer Value
|
|
|
|
|
#define UART_LTIM_TIMER_S 0
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_9BITADDR
|
|
|
|
|
// register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_9BITADDR_9BITEN 0x00008000 // Enable 9-Bit Mode
|
|
|
|
|
#define UART_9BITADDR_ADDR_M 0x000000FF // Self Address for 9-Bit Mode
|
|
|
|
|
#define UART_9BITADDR_ADDR_S 0
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_9BITAMASK
|
|
|
|
|
// register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_9BITAMASK_RANGE_M 0x0000FF00 // Self Address Range for 9-Bit
|
|
|
|
|
// Mode
|
|
|
|
|
#define UART_9BITAMASK_MASK_M 0x000000FF // Self Address Mask for 9-Bit Mode
|
|
|
|
|
#define UART_9BITAMASK_RANGE_S 8
|
|
|
|
|
#define UART_9BITAMASK_MASK_S 0
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_PP register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_PP_NB 0x00000002 // 9-Bit Support
|
|
|
|
|
#define UART_PP_SC 0x00000001 // Smart Card Support
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are defines for the bit fields in the UART_O_CC register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_CC_CS_M 0x0000000F // UART Baud Clock Source
|
|
|
|
|
#define UART_CC_CS_SYSCLK 0x00000000 // The system clock (default)
|
|
|
|
|
#define UART_CC_CS_PIOSC 0x00000001 // PIOSC
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following definitions are deprecated.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#ifndef DEPRECATED
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are deprecated defines for the UART register offsets.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_O_LCR_H 0x0000002C // Line Control Register, HIGH byte
|
|
|
|
|
#define UART_O_PeriphID4 0x00000FD0
|
|
|
|
|
#define UART_O_PeriphID5 0x00000FD4
|
|
|
|
|
#define UART_O_PeriphID6 0x00000FD8
|
|
|
|
|
#define UART_O_PeriphID7 0x00000FDC
|
|
|
|
|
#define UART_O_PeriphID0 0x00000FE0
|
|
|
|
|
#define UART_O_PeriphID1 0x00000FE4
|
|
|
|
|
#define UART_O_PeriphID2 0x00000FE8
|
|
|
|
|
#define UART_O_PeriphID3 0x00000FEC
|
|
|
|
|
#define UART_O_PCellID0 0x00000FF0
|
|
|
|
|
#define UART_O_PCellID1 0x00000FF4
|
|
|
|
|
#define UART_O_PCellID2 0x00000FF8
|
|
|
|
|
#define UART_O_PCellID3 0x00000FFC
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are deprecated defines for the bit fields in the UART_O_DR
|
|
|
|
|
// register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_DR_DATA_MASK 0x000000FF // UART data
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are deprecated defines for the bit fields in the UART_O_IBRD
|
|
|
|
|
// register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_IBRD_DIVINT_MASK 0x0000FFFF // Integer baud-rate divisor
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are deprecated defines for the bit fields in the UART_O_FBRD
|
|
|
|
|
// register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_FBRD_DIVFRAC_MASK 0x0000003F // Fractional baud-rate divisor
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are deprecated defines for the bit fields in the UART_O_LCR_H
|
|
|
|
|
// register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_LCR_H_SPS 0x00000080 // Stick Parity Select
|
|
|
|
|
#define UART_LCR_H_WLEN 0x00000060 // Word length
|
|
|
|
|
#define UART_LCR_H_WLEN_5 0x00000000 // 5 bit data
|
|
|
|
|
#define UART_LCR_H_WLEN_6 0x00000020 // 6 bit data
|
|
|
|
|
#define UART_LCR_H_WLEN_7 0x00000040 // 7 bit data
|
|
|
|
|
#define UART_LCR_H_WLEN_8 0x00000060 // 8 bit data
|
|
|
|
|
#define UART_LCR_H_FEN 0x00000010 // Enable FIFO
|
|
|
|
|
#define UART_LCR_H_STP2 0x00000008 // Two Stop Bits Select
|
|
|
|
|
#define UART_LCR_H_EPS 0x00000004 // Even Parity Select
|
|
|
|
|
#define UART_LCR_H_PEN 0x00000002 // Parity Enable
|
|
|
|
|
#define UART_LCR_H_BRK 0x00000001 // Send Break
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are deprecated defines for the bit fields in the UART_O_IFLS
|
|
|
|
|
// register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_IFLS_RX_MASK 0x00000038 // RX FIFO level mask
|
|
|
|
|
#define UART_IFLS_TX_MASK 0x00000007 // TX FIFO level mask
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are deprecated defines for the bit fields in the UART_O_ICR
|
|
|
|
|
// register.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_ICR_LME5MIC 0x00008000 // LIN Mode Edge 5 Interrupt Clear
|
|
|
|
|
#define UART_ICR_LME1MIC 0x00004000 // LIN Mode Edge 1 Interrupt Clear
|
|
|
|
|
#define UART_ICR_LMSBMIC 0x00002000 // LIN Mode Sync Break Interrupt
|
|
|
|
|
// Clear
|
|
|
|
|
#define UART_RSR_ANY (UART_RSR_OE | UART_RSR_BE | UART_RSR_PE | \
|
|
|
|
|
UART_RSR_FE)
|
|
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
//
|
|
|
|
|
// The following are deprecated defines for the Reset Values for UART
|
|
|
|
|
// Registers.
|
|
|
|
|
//
|
|
|
|
|
//*****************************************************************************
|
|
|
|
|
#define UART_RV_CTL 0x00000300
|
|
|
|
|
#define UART_RV_PCellID1 0x000000F0
|
|
|
|
|
#define UART_RV_PCellID3 0x000000B1
|
|
|
|
|
#define UART_RV_FR 0x00000090
|
|
|
|
|
#define UART_RV_PeriphID2 0x00000018
|
|
|
|
|
#define UART_RV_IFLS 0x00000012
|
|
|
|
|
#define UART_RV_PeriphID0 0x00000011
|
|
|
|
|
#define UART_RV_PCellID0 0x0000000D
|
|
|
|
|
#define UART_RV_PCellID2 0x00000005
|
|
|
|
|
#define UART_RV_PeriphID3 0x00000001
|
|
|
|
|
#define UART_RV_PeriphID4 0x00000000
|
|
|
|
|
#define UART_RV_LCR_H 0x00000000
|
|
|
|
|
#define UART_RV_PeriphID6 0x00000000
|
|
|
|
|
#define UART_RV_DR 0x00000000
|
|
|
|
|
#define UART_RV_RSR 0x00000000
|
|
|
|
|
#define UART_RV_ECR 0x00000000
|
|
|
|
|
#define UART_RV_PeriphID5 0x00000000
|
|
|
|
|
#define UART_RV_RIS 0x00000000
|
|
|
|
|
#define UART_RV_FBRD 0x00000000
|
|
|
|
|
#define UART_RV_IM 0x00000000
|
|
|
|
|
#define UART_RV_MIS 0x00000000
|
|
|
|
|
#define UART_RV_ICR 0x00000000
|
|
|
|
|
#define UART_RV_PeriphID1 0x00000000
|
|
|
|
|
#define UART_RV_PeriphID7 0x00000000
|
|
|
|
|
#define UART_RV_IBRD 0x00000000
|
|
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#endif // __HW_UART_H__
|
