Goals:
1. Default to :random for newly generated applications
2. Default to :sorted for existing applications with a warning
3. Only show the warning once
4. Only show the warning if the app actually uses AS::TestCase
Fixes#16769
When we are loading a component and we want to know its version, we are
actually not speaking about the constant but the library itself.
[ci skip]
[Godfrey Chan & Xavier Noria]
Action Mailer tests weren't able to run in isolation without the bundle
exec prefix since we were requiring gems before requiring abstract_unit.
We don't need the `gem` call thus and the require_relative since the
test directory should be present in the load path when we run any test.
This way these methods are available outside the ActionMailer test suite, but
they are still duplicated inside `test/abstract_unit` for test cases that don't
inherit from the `ActionMailer::TestCase` class.
Calling ActiveSupport::TestCase.i_suck_and_my_tests_are_order_dependent! in AS::TestCase makes
everyone's tests order dependent, which should never be done by the framework.
Email does not support relative links since there is no implicit host. Therefore all links inside of emails must be fully qualified URLs. All path helpers are now deprecated. When removed, the error will give early indication to developers to use `*_url` methods instead.
Currently if a developer uses a `*_path` helper, their tests and `mail_view` will not catch the mistake. The only way to see the error is by sending emails in production. Preventing sending out emails with non-working path's is the desired end goal of this PR.
Currently path helpers are mixed-in to controllers (the ActionMailer::Base acts as a controller). All `*_url` and `*_path` helpers are made available through the same module. This PR separates this behavior into two modules so we can extend the `*_path` methods to add a Deprecation to them. Once deprecated we can use this same area to raise a NoMethodError and add an informative message directing the developer to use `*_url` instead.
The module with warnings is only mixed in when a controller returns false from the newly added `supports_relative_path?`.
Paired @sgrif & @schneems
Closes#16163
Adding attachments after a call to `mail` will result in invalid emails.
This is related to the fact, that `mail` is making the required preparations
before the email is ready to be sent. These change depending on your
added attachments.
We are planning to remove mocha from our test suite because of
performance problems. To make this possible we should stop require mocha
on ActionSupport::TestCase.
This should not affect applications since users still need to add mocha
to Gemfile and this already load mocha.
Added FIXME notes to place that still need mocha removal
Adds `config.action_mailer.preview_enabled`
This allows mail previewing to be enabled easily in non-development
environments such as staging. The default is set to true for development
so no changes should be required to existing Rails applications.
The mail preview path can still be configured using the existing
`config.action_mailer.preview_path` configuration option.
Adding this avoids devs from having to do stuff like:
https://gist.github.com/lengarvey/fa2c9bd6cdbeba96526a
Update actionmailer/CHANGELOG with new configuration.
Update configuring guide with new configuratation.
Add `config.action_mailer.preview_path` to configuring guide.
*TLDR*: The method is 4 times faster when log level is higher than DEBUG.
Also, the other two methods, `#deliver` and `#receive` have similar guard statements,
so this commit adds some symmetry to the code.
This is probably not the most critical part of ActionMailer in terms
of performance, but here are some benchmarks:
```
require 'benchmark/ips'
require 'action_mailer'
event = ActiveSupport::Notifications::Event.new(
'process.action_mailer',
Time.now,
Time.now,
'bf4e2b36ce085fd35b24',
{ mailer: "UserMailer", action: :welcome }
)
ActionMailer::Base.logger = ActiveSupport::Logger.new '/dev/null'
subscriber = ActionMailer::LogSubscriber.new
def subscriber.process_with_guard(event)
return unless logger.debug?
mailer = event.payload[:mailer]
action = event.payload[:action]
debug("\n#{mailer}##{action}: processed outbound mail in #{event.duration.round(1)}ms")
end
Benchmark.ips do |r|
ActionMailer::Base.logger.level = ::Logger::Severity::INFO
r.report('no guard') { subscriber.process(event) }
r.report(' guard') { subscriber.process_with_guard(event) }
end
__END__
Calculating -------------------------------------
no guard 9640 i/100ms
guard 38381 i/100ms
-------------------------------------------------
no guard 169166.9 (±10.2%) i/s - 838680 in 5.007262s
guard 728184.9 (±9.6%) i/s - 3607814 in 4.999218s
```
When log level is DEBUG, the _guarded_ method is a bit slower. This is a
good tradeoff for 4x improvement in production mode.
```
Benchmark.ips do |r|
ActionMailer::Base.logger.level = ::Logger::Severity::DEBUG
r.report('no guard') { subscriber.process(event) }
r.report(' guard') { subscriber.process_with_guard(event) }
end
__END__
Calculating -------------------------------------
no guard 4970 i/100ms
guard 4564 i/100ms
-------------------------------------------------
no guard 55617.4 (±3.5%) i/s - 278320 in 5.010523s
guard 49452.1 (±5.6%) i/s - 251020 in 5.093358s
```
This was partially broken because `preview_interceptors=` just assigned the
raw values, whithout going through `register_preview_interceptor`. Now the
Action Mailer railtie takes care of the `preview_interceptors` option.
This commit is a partial revert of:
Revert "Merge pull request #15739 from y-yagi/correct_doc_for_action_mailer_base"
This reverts commit a15704d7f3, reversing
changes made to 1bd12a8609.
/cc @kuldeepaggarwal @y-yagi
If i18n_with_controller_test.rb were to run first, the I18n.locale will
be changed to :de, and the following tests in base_test.rb will fail:
"subject gets default from I18n"
“default subject can have interpolations”
"translations are scoped properly"
"implicit multipart with default locale"
`ActionMailer::Base.delivery_method` and
`ActionMailer::Base.perform_deliveries` have leaked states.
"delivery method can be customized per instance" and "delivery method
can be customized in subclasses not changing the parent" in
delivery_methods_test.rb will fail if test_helper_test.rb (in which
TestHelperMailerTest is inherited from ActionMailer::TestCase) runs
before it.
This allows Rails users to install mail 2.6 which relaxes
the mime-types dependency, which is a big win for a lot of people.
Previously, the mail gem restricted mime-types to ~> 1.16
but now it has expanded to [">= 1.16", "< 3"]
And the mime-types maintainer will also be checking that
2.x releases don't break mail.
See https://github.com/mikel/mail/pull/713https://rubygems.org/gems/mail/versions/2.6.0
`BaseMailerPreview.welcome` is an instance method, so we need to stub the
method on a instance level and not on Class. The stub is important to make
sure the Message object is the same in the other expectations.
This was working randomly because Mocha uses == to compare two objects
on the `with()` expectation and even if the Mail::Message objects were
not the same object they are equal, but thats not the case in 100% of
the runs. So we need to make sure we use `.any_instance` method and have
the right message object.
This method return `Gem::Version.new(Rails.version)`, suggesting a more
reliable way to perform version comparison.
Example:
Rails.version #=> "4.1.2"
Rails.gem_version #=> #<Gem::Version "4.1.2">
Rails.version > "4.1.10" #=> false
Rails.gem_version > Gem::Version.new("4.1.10") #=> true
Gem::Requirement.new("~> 4.1.2") =~ Rails.gem_version #=> true
This was originally introduced as `.version` by @charliesome in #8501
but got reverted in #10002 since it was not backward compatible.
Also, updating template for `rake update_versions`.
We allow the use of underscored symbols to represent classes throughout
other parts of Rails so it seems incongruous that it's not supported in
`register_interceptor` and `register_observer`.
Since preview_path is read from ActionMailer::Base when previewing, subclasses
can’t change it so don’t there's no need for the extra overhead imposed by using it.
To support the ability for tools like CSS style inliners to operate on emails
being previewed this commit adds a hook in a similar fashion to the existing
delivery interceptor hook, e.g:
class CSSInlineStyler
def self.previewing_email(message)
# inline CSS styles
end
end
ActionMailer::Base.register_preview_interceptor CSSInlineStyler
Fixes#13622.
Only config.autoload_paths is frozen, so add the preview_path
to ActiveSupport::Dependencies.autoload_paths directly in an
after_initialize block. Also protect against a blank preview_path
being added to autoload_paths which can cause a serious slowdown
as Dir[] tries to load all *_preview.rb files under /
Fixes#13372
The processing of outbound mail is instrumented with the key
`process.action_mailer`. The payload includes the mailer name as well as
the mailer method.
Akshay Vishnoi