* Move renderer `act` to work loop
* Delete `flushSuspenseFallbacksInTests`
This was meant to be a temporary hack to unblock the `act` work, but it
quickly spread throughout our tests.
What it's meant to do is force fallbacks to flush inside `act` even in
Concurrent Mode. It does this by wrapping the `setTimeout` call in a
check to see if it's in an `act` context. If so, it skips the delay and
immediately commits the fallback.
Really this is only meant for our internal React tests that need to
incrementally render. Nobody outside our team (and Relay) needs to do
that, yet. Even if/when we do support that, it may or may not be with
the same `flushAndYield` pattern we use internally.
However, even for our internal purposes, the behavior isn't right
because a really common reason we flush work incrementally is to make
assertions on the "suspended" state, before the fallback has committed.
There's no way to do that from inside `act` with the behavior of this
flag, because it causes the fallback to immediately commit. This has led
us to *not* use `act` in a lot of our tests, or to write code that
doesn't match what would actually happen in a real environment.
What we really want is for the fallbacks to be flushed at the *end` of
the `act` scope. Not within it.
This only affects the noop and test renderer versions of `act`, which
are implemented inside the reconciler. Whereas `ReactTestUtils.act` is
implemented in "userspace" for backwards compatibility. This is fine
because we didn't have any DOM Suspense tests that relied on this flag;
they all use test renderer or noop.
In the future, we'll probably want to move always use the reconciler
implementation of `act`. It will not affect the prod bundle, because we
currently only plan to support `act` in dev. Though we still haven't
completely figured that out. However, regardless of whether we support a
production `act` for users, we'll still need to write internal React
tests in production mode. For that use case, we'll likely add our own
internal version of `act` that assumes a mock Scheduler and might rely
on hacks that don't 100% align up with the public one.
* Migrate conditional tests to gate pragma
I searched through the codebase for this pattern:
```js
describe('test suite', () => {
if (!__EXPERIMENTAL__) { // or some other condition
test("empty test so Jest doesn't complain", () => {});
return;
}
// Unless we're in experimental mode, none of the tests in this block
// will run.
})
```
and converted them to the `@gate` pragma instead.
The reason this pattern isn't preferred is because you end up disabling
more tests than you need to.
* Add flag for www release channels
Using a heuristic where I check a flag that is known to only be enabled
in www. I left a TODO to instead set the release channel explicitly in
each test config.
* Add more edge cases to fixture
Also adjust some expectations. I think the column should ideally be 1 but varies.
The Example row is one line off because it throws on the hook but should ideally be the component.
Similarly class components with constructors may have the line in the constructor.
* Account for the construct call taking a stack frame
We do this by first searching for the first different frame, then find
the same frames and then find the first different frame again.
* Throw controls
Otherwise they don't get a stack frame associated with them in IE.
* Protect against generating stacks failing
Errors while generating stacks will bubble to the root. Since this technique
is a bit sketchy, we should probably protect against it.
* Don't construct the thing that throws
Instead, we pass the prototype as the "this". It's new every time anyway.
* Implement component stack extraction hack
* Normalize errors in tests
This drops the requirement to include owner to pass the test.
* Special case tests
* Add destructuring to force toObject which throws before the side-effects
This ensures that we don't double call yieldValue or advanceTime in tests.
Ideally we could use empty destructuring but ES lint doesn't like it.
* Cache the result in DEV
In DEV it's somewhat likely that we'll see many logs that add component
stacks. This could be slow so we cache the results of previous components.
* Fixture
* Add Reflect to lint
* Log if out of range.
* Fix special case when the function call throws in V8
In V8 we need to ignore the first line. Normally we would never get there
because the stacks would differ before that, but the stacks are the same if
we end up throwing at the same place as the control.
We can't patch the row. We could give these their own "built-in" stack
frame since they're conceptually HoCs. However, from a debugging
perspective this is not very useful meta data and quite noisy. So I'm
just going to exclude them.
* Disable console log during the second rerender
* Use the disabled log to avoid double yielding values in scheduler mock
* Reenable debugRenderPhaseSideEffectsForStrictMode in tests that can
* Filter certain DOM attributes (e.g. src, href) if their values are empty strings
This prevents e.g. <img src=""> from making an unnecessar HTTP request for certain browsers.
* Expanded warning recommendation
* Improved error message
* Further refined error message
* Add useOpaqueIdentifier Hook
We currently use unique IDs in a lot of places. Examples are:
* `<label for="ID">`
* `aria-labelledby`
This can cause some issues:
1. If we server side render and then hydrate, this could cause an
hydration ID mismatch
2. If we server side render one part of the page and client side
render another part of the page, the ID for one part could be
different than the ID for another part even though they are
supposed to be the same
3. If we conditionally render something with an ID , this might also
cause an ID mismatch because the ID will be different on other
parts of the page
This PR creates a new hook `useUniqueId` that generates a different
unique ID based on whether the hook was called on the server or client.
If the hook is called during hydration, it generates an opaque object
that will rerender the hook so that the IDs match.
Co-authored-by: Andrew Clark <git@andrewclark.io>
* Add feature flag
* Split stack from current fiber
You can get stack from any fiber, not just current.
* Refactor description of component frames
These should use fiber tags for switching. This also puts the relevant code
behind DEV flags.
* We no longer expose StrictMode in component stacks
They're not super useful and will go away later anyway.
* Update tests
Context is no longer part of SSR stacks. This was already the case on the
client.
forwardRef no longer is wrapped on the stack. It's still in getComponentName
but it's probably just noise in stacks. Eventually we'll remove the wrapper
so it'll go away anyway. If we use native stack frames they won't have this
extra wrapper.
It also doesn't pick up displayName from the outer wrapper. We could maybe
transfer it but this will also be fixed by removing the wrapper.
* Forward displayName onto the inner function for forwardRef and memo in DEV
This allows them to show up in stack traces.
I'm not doing this for lazy because lazy is supposed to be called on the
consuming side so you shouldn't assign it a name on that end. Especially
not one that mutates the inner.
* Use multiple instances of the fake component
We mutate the inner component for its name so we need multiple copies.
* Enable prefer-const rule
Stylistically I don't like this but Closure Compiler takes advantage of
this information.
* Auto-fix lints
* Manually fix the remaining callsites
* Upgrade Closure
There are newer versions but they don't yet have corresponding releases
of google-closure-compiler-osx.
* Configure build
* Refactor ReactSymbols a bit
Provides a little better output.
* Enable new passive effect behavior for FB builds
Previously this behavior was controlled by GKs. This PR updates the flags to be enabled statically. It also enables the flags in the test builds.
* Revert "ReactDOM.useEvent: enable on internal www and add inspection test (#18395)"
This reverts commit e0ab1a429d.
* Revert "ReactDOM.useEvent: Add support for experimental scopes API (#18375)"
This reverts commit a16b349745.
* ReactDOM.useEvent: Add support for experimental scopes API
* Formalize the Wakeable and Thenable types
We use two subsets of Promises throughout React APIs. This introduces
the smallest subset - Wakeable. It's the thing that you can throw to
suspend. It's something that can ping.
I also use a shared type for Thenable in the cases where we expect a value
so we can be a bit more rigid with our us of them.
* Make Chunks into Wakeables instead of using native Promises
This value is just going from here to React so we can keep it a lighter
abstraction throughout.
* Renamed thenable to wakeable in variable names
* Resolve Server-side Blocks instead of Components
React elements should no longer be used to extract arbitrary data but only
for prerendering trees.
Blocks are used to create asynchronous behavior.
* Resolve Blocks in the Client
* Tests
* Bug fix relay JSON traversal
It's supposed to pass the original object and not the new one.
* Lint
* Move Noop Module Test Helpers to top level entry points
This module has shared state. It needs to be external from builds.
This lets us test the built versions of the Noop renderer.
* Refactor Lazy Components
* Switch Blocks to using a Lazy component wrapper
Then resolve to a true Block inside.
* Test component names of lazy Blocks
* Rename lower case isomorphic default exports modules to upper case named exports
We're somewhat inconsistent here between e.g. ReactLazy and memo.
Let's pick one.
This also moves the responder, fundamental, scope creators from shared
since they're isomorphic and same as the other creators.
* Move some files that are specific to the react-reconciler from shared
Individual renderers are allowed to deep require into the reconciler.
* Move files specific to react-dom from shared
react-interactions is right now dom specific (it wasn't before) so we can
type check it together with other dom stuff. Avoids the need for
a shared ReactDOMTypes to be checked by RN for example.
* Move ReactWorkTags to the reconciler
* Move createPortal to export from reconciler
Otherwise Noop can't access it since it's not allowed deep requires.
* ReactFiberReconciler -> ReactFiberReconciler.old
* Set up infra for react-reconciler fork
We're planning to land some significant refactors of the reconciler.
We want to be able to gradually roll out the new implementation side-by-
side with the existing one. So we'll create a short lived fork of the
react-reconciler package. Once the new implementation has stabilized,
we'll delete the old implementation and promote the new one.
This means, for as long as the fork exists, we'll need to maintain two
separate implementations. This sounds painful, but since the forks will
still be largely the same, most changes will not require two separate
implementations. In practice, you'll implement the change in the old
fork and then copy paste it to the new one.
This commit only sets up the build and testing infrastructure. It does
not actually fork any modules. I'll do that in subsequent PRs.
The forked version of the reconciler will be used to build a special
version of React DOM. I've called this build ReactDOMForked. It's only
built for www; there's no open source version.
The new reconciler is disabled by default. It's enabled in the
`yarn test-www-variant` command. The reconciler fork isn't really
related to the "variant" feature of the www builds, but I'm piggy
backing on that concept to avoid having to add yet another
testing dimension.
useMutableSource hook
useMutableSource() enables React components to safely and efficiently read from a mutable external source in Concurrent Mode. The API will detect mutations that occur during a render to avoid tearing and it will automatically schedule updates when the source is mutated.
RFC: reactjs/rfcs#147
* Require deep for reconcilers
* Delete inline* files
* Delete react-reconciler/persistent
This no longer makes any sense because it react-reconciler takes
supportsMutation or supportsPersistence as options. It's no longer based
on feature flags.
* Fix jest mocking
* Fix Flow strategy
We now explicitly list which paths we want to be checked by a renderer.
For every other renderer config we ignore those paths.
Nothing is "any" typed. So if some transitive dependency isn't reachable
it won't be accidentally "any" that leaks.
* Lazify Blocks
Blocks now initialize lazily.
* Initialize Blocks eagerly in ChildFiber
This is for the case when it's a new Block that hasn't yet initialized.
We need to first initialize it to see what "render function" it resolves
to so that we can use that in our comparison.
* Remove extra import type line
In CI, we run our test suite against multiple build configurations. For
example, we run our tests in both dev and prod, and in both the
experimental and stable release channels. This is to prevent accidental
deviations in behavior between the different builds. If there's an
intentional deviation in behavior, the test author must account
for them.
However, we currently don't run tests against the www builds. That's
a problem, because it's common for features to land in www before they
land anywhere else, including the experimental release channel.
Typically we do this so we can gradually roll out the feature behind
a flag before deciding to enable it.
The way we test those features today is by mutating the
`shared/ReactFeatureFlags` module. There are a few downsides to this
approach, though. The flag is only overridden for the specific tests or
test suites where you apply the override. But usually what you want is
to run *all* tests with the flag enabled, to protect against unexpected
regressions.
Also, mutating the feature flags module only works when running the
tests against source, not against the final build artifacts, because the
ReactFeatureFlags module is inlined by the build script.
Instead, we should run the test suite against the www configuration,
just like we do for prod, experimental, and so on. I've added a new
command, `yarn test-www`. It automatically runs in CI.
Some of the www feature flags are dynamic; that is, they depend on
a runtime condition (i.e. a GK). These flags are imported from an
external module that lives in www. Those flags will be enabled for some
clients and disabled for others, so we should run the tests against
*both* modes.
So I've added a new global `__VARIANT__`, and a new test command `yarn
test-www-variant`. `__VARIANT__` is set to false by default; when
running `test-www-variant`, it's set to true.
If we were going for *really* comprehensive coverage, we would run the
tests against every possible configuration of feature flags: 2 ^
numberOfFlags total combinations. That's not practical, though, so
instead we only run against two combinations: once with `__VARIANT__`
set to `true`, and once with it set to `false`. We generally assume that
flags can be toggled independently, so in practice this should
be enough.
You can also refer to `__VARIANT__` in tests to detect which mode you're
running in. Or, you can import `shared/ReactFeatureFlags` and read the
specific flag you can about. However, we should stop mutating that
module going forward. Treat it as read-only.
In this commit, I have only setup the www tests to run against source.
I'll leave running against build for a follow up.
Many of our tests currently assume they run only in the default
configuration, and break when certain flags are toggled. Rather than fix
these all up front, I've hard-coded the relevant flags to the default
values. We can incrementally migrate those tests later.
* Implemented Profiler onCommit() and onPostCommit() hooks
* Added enableProfilerCommitHooks feature flag for commit hooks
* Moved onCommit and onPassiveCommit behind separate feature flag
Dan Abramov