llvm-project/llvm/lib/Target/ARM/MCTargetDesc/ARMUnwindOpAsm.cpp

197 lines
6.9 KiB
C++

//===-- ARMUnwindOpAsm.cpp - ARM Unwind Opcodes Assembler -------*- C++ -*-===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
//
// This file implements the unwind opcode assembler for ARM exception handling
// table.
//
//===----------------------------------------------------------------------===//
#include "ARMUnwindOpAsm.h"
#include "llvm/Support/ARMEHABI.h"
#include "llvm/Support/LEB128.h"
#include "llvm/Support/MathExtras.h"
#include <cassert>
using namespace llvm;
namespace {
/// UnwindOpcodeStreamer - The simple wrapper over SmallVector to emit bytes
/// with MSB to LSB per uint32_t ordering. For example, the first byte will
/// be placed in Vec[3], and the following bytes will be placed in 2, 1, 0,
/// 7, 6, 5, 4, 11, 10, 9, 8, and so on.
class UnwindOpcodeStreamer {
private:
SmallVectorImpl<uint8_t> &Vec;
size_t Pos = 3;
public:
UnwindOpcodeStreamer(SmallVectorImpl<uint8_t> &V) : Vec(V) {}
/// Emit the byte in MSB to LSB per uint32_t order.
void EmitByte(uint8_t elem) {
Vec[Pos] = elem;
Pos = (((Pos ^ 0x3u) + 1) ^ 0x3u);
}
/// Emit the size prefix.
void EmitSize(size_t Size) {
size_t SizeInWords = (Size + 3) / 4;
assert(SizeInWords <= 0x100u &&
"Only 256 additional words are allowed for unwind opcodes");
EmitByte(static_cast<uint8_t>(SizeInWords - 1));
}
/// Emit the personality index prefix.
void EmitPersonalityIndex(unsigned PI) {
assert(PI < ARM::EHABI::NUM_PERSONALITY_INDEX &&
"Invalid personality prefix");
EmitByte(ARM::EHABI::EHT_COMPACT | PI);
}
/// Fill the rest of bytes with FINISH opcode.
void FillFinishOpcode() {
while (Pos < Vec.size())
EmitByte(ARM::EHABI::UNWIND_OPCODE_FINISH);
}
};
} // end anonymous namespace
void UnwindOpcodeAssembler::EmitRegSave(uint32_t RegSave) {
if (RegSave == 0u)
return;
// One byte opcode to save register r14 and r11-r4
if (RegSave & (1u << 4)) {
// The one byte opcode will always save r4, thus we can't use the one byte
// opcode when r4 is not in .save directive.
// Compute the consecutive registers from r4 to r11.
uint32_t Mask = RegSave & 0xff0u;
uint32_t Range = countTrailingOnes(Mask >> 5); // Exclude r4.
// Mask off non-consecutive registers. Keep r4.
Mask &= ~(0xffffffe0u << Range);
// Emit this opcode when the mask covers every registers.
uint32_t UnmaskedReg = RegSave & 0xfff0u & (~Mask);
if (UnmaskedReg == 0u) {
// Pop r[4 : (4 + n)]
EmitInt8(ARM::EHABI::UNWIND_OPCODE_POP_REG_RANGE_R4 | Range);
RegSave &= 0x000fu;
} else if (UnmaskedReg == (1u << 14)) {
// Pop r[14] + r[4 : (4 + n)]
EmitInt8(ARM::EHABI::UNWIND_OPCODE_POP_REG_RANGE_R4_R14 | Range);
RegSave &= 0x000fu;
}
}
// Two bytes opcode to save register r15-r4
if ((RegSave & 0xfff0u) != 0)
EmitInt16(ARM::EHABI::UNWIND_OPCODE_POP_REG_MASK_R4 | (RegSave >> 4));
// Opcode to save register r3-r0
if ((RegSave & 0x000fu) != 0)
EmitInt16(ARM::EHABI::UNWIND_OPCODE_POP_REG_MASK | (RegSave & 0x000fu));
}
/// Emit unwind opcodes for .vsave directives
void UnwindOpcodeAssembler::EmitVFPRegSave(uint32_t VFPRegSave) {
// We only have 4 bits to save the offset in the opcode so look at the lower
// and upper 16 bits separately.
for (uint32_t Regs : {VFPRegSave & 0xffff0000u, VFPRegSave & 0x0000ffffu}) {
while (Regs) {
// Now look for a run of set bits. Remember the MSB and LSB of the run.
auto RangeMSB = 32 - countLeadingZeros(Regs);
auto RangeLen = countLeadingOnes(Regs << (32 - RangeMSB));
auto RangeLSB = RangeMSB - RangeLen;
int Opcode = RangeLSB >= 16
? ARM::EHABI::UNWIND_OPCODE_POP_VFP_REG_RANGE_FSTMFDD_D16
: ARM::EHABI::UNWIND_OPCODE_POP_VFP_REG_RANGE_FSTMFDD;
EmitInt16(Opcode | ((RangeLSB % 16) << 4) | (RangeLen - 1));
// Zero out bits we're done with.
Regs &= ~(-1u << RangeLSB);
}
}
}
/// Emit unwind opcodes to copy address from source register to $sp.
void UnwindOpcodeAssembler::EmitSetSP(uint16_t Reg) {
EmitInt8(ARM::EHABI::UNWIND_OPCODE_SET_VSP | Reg);
}
/// Emit unwind opcodes to add $sp with an offset.
void UnwindOpcodeAssembler::EmitSPOffset(int64_t Offset) {
if (Offset > 0x200) {
uint8_t Buff[16];
Buff[0] = ARM::EHABI::UNWIND_OPCODE_INC_VSP_ULEB128;
size_t ULEBSize = encodeULEB128((Offset - 0x204) >> 2, Buff + 1);
emitBytes(Buff, ULEBSize + 1);
} else if (Offset > 0) {
if (Offset > 0x100) {
EmitInt8(ARM::EHABI::UNWIND_OPCODE_INC_VSP | 0x3fu);
Offset -= 0x100;
}
EmitInt8(ARM::EHABI::UNWIND_OPCODE_INC_VSP |
static_cast<uint8_t>((Offset - 4) >> 2));
} else if (Offset < 0) {
while (Offset < -0x100) {
EmitInt8(ARM::EHABI::UNWIND_OPCODE_DEC_VSP | 0x3fu);
Offset += 0x100;
}
EmitInt8(ARM::EHABI::UNWIND_OPCODE_DEC_VSP |
static_cast<uint8_t>(((-Offset) - 4) >> 2));
}
}
void UnwindOpcodeAssembler::Finalize(unsigned &PersonalityIndex,
SmallVectorImpl<uint8_t> &Result) {
UnwindOpcodeStreamer OpStreamer(Result);
if (HasPersonality) {
// User-specifed personality routine: [ SIZE , OP1 , OP2 , ... ]
PersonalityIndex = ARM::EHABI::NUM_PERSONALITY_INDEX;
size_t TotalSize = Ops.size() + 1;
size_t RoundUpSize = (TotalSize + 3) / 4 * 4;
Result.resize(RoundUpSize);
OpStreamer.EmitSize(RoundUpSize);
} else {
// If no personalityindex is specified, select ane
if (PersonalityIndex == ARM::EHABI::NUM_PERSONALITY_INDEX)
PersonalityIndex = (Ops.size() <= 3) ? ARM::EHABI::AEABI_UNWIND_CPP_PR0
: ARM::EHABI::AEABI_UNWIND_CPP_PR1;
if (PersonalityIndex == ARM::EHABI::AEABI_UNWIND_CPP_PR0) {
// __aeabi_unwind_cpp_pr0: [ 0x80 , OP1 , OP2 , OP3 ]
assert(Ops.size() <= 3 && "too many opcodes for __aeabi_unwind_cpp_pr0");
Result.resize(4);
OpStreamer.EmitPersonalityIndex(PersonalityIndex);
} else {
// __aeabi_unwind_cpp_pr{1,2}: [ {0x81,0x82} , SIZE , OP1 , OP2 , ... ]
size_t TotalSize = Ops.size() + 2;
size_t RoundUpSize = (TotalSize + 3) / 4 * 4;
Result.resize(RoundUpSize);
OpStreamer.EmitPersonalityIndex(PersonalityIndex);
OpStreamer.EmitSize(RoundUpSize);
}
}
// Copy the unwind opcodes
for (size_t i = OpBegins.size() - 1; i > 0; --i)
for (size_t j = OpBegins[i - 1], end = OpBegins[i]; j < end; ++j)
OpStreamer.EmitByte(Ops[j]);
// Emit the padding finish opcodes if the size is not multiple of 4.
OpStreamer.FillFinishOpcode();
// Reset the assembler state
Reset();
}