maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/lld/ELF/Arch/PPC64.cpp

932 lines
32 KiB
C++
Raw Blame History

//===- PPC64.cpp ----------------------------------------------------------===//
//
// The LLVM Linker
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
#include "Symbols.h"
#include "SyntheticSections.h"
#include "Target.h"
#include "lld/Common/ErrorHandler.h"
#include "llvm/Support/Endian.h"
using namespace llvm;
using namespace llvm::object;
using namespace llvm::support::endian;
using namespace llvm::ELF;
using namespace lld;
using namespace lld::elf;
static uint64_t PPC64TocOffset = 0x8000;
static uint64_t DynamicThreadPointerOffset = 0x8000;
// The instruction encoding of bits 21-30 from the ISA for the Xform and Dform
// instructions that can be used as part of the initial exec TLS sequence.
enum XFormOpcd {
LBZX = 87,
LHZX = 279,
LWZX = 23,
LDX = 21,
STBX = 215,
STHX = 407,
STWX = 151,
STDX = 149,
ADD = 266,
};
enum DFormOpcd {
LBZ = 34,
LBZU = 35,
LHZ = 40,
LHZU = 41,
LHAU = 43,
LWZ = 32,
LWZU = 33,
LFSU = 49,
LD = 58,
LFDU = 51,
STB = 38,
STBU = 39,
STH = 44,
STHU = 45,
STW = 36,
STWU = 37,
STFSU = 53,
STFDU = 55,
STD = 62,
ADDI = 14
};
uint64_t elf::getPPC64TocBase() {
// The TOC consists of sections .got, .toc, .tocbss, .plt in that order. The
// TOC starts where the first of these sections starts. We always create a
// .got when we see a relocation that uses it, so for us the start is always
// the .got.
uint64_t TocVA = In.Got->getVA();
// Per the ppc64-elf-linux ABI, The TOC base is TOC value plus 0x8000
// thus permitting a full 64 Kbytes segment. Note that the glibc startup
// code (crt1.o) assumes that you can get from the TOC base to the
// start of the .toc section with only a single (signed) 16-bit relocation.
return TocVA + PPC64TocOffset;
}
unsigned elf::getPPC64GlobalEntryToLocalEntryOffset(uint8_t StOther) {
// The offset is encoded into the 3 most significant bits of the st_other
// field, with some special values described in section 3.4.1 of the ABI:
// 0 --> Zero offset between the GEP and LEP, and the function does NOT use
// the TOC pointer (r2). r2 will hold the same value on returning from
// the function as it did on entering the function.
// 1 --> Zero offset between the GEP and LEP, and r2 should be treated as a
// caller-saved register for all callers.
// 2-6 --> The binary logarithm of the offset eg:
// 2 --> 2^2 = 4 bytes --> 1 instruction.
// 6 --> 2^6 = 64 bytes --> 16 instructions.
// 7 --> Reserved.
uint8_t GepToLep = (StOther >> 5) & 7;
if (GepToLep < 2)
return 0;
// The value encoded in the st_other bits is the
// log-base-2(offset).
if (GepToLep < 7)
return 1 << GepToLep;
error("reserved value of 7 in the 3 most-significant-bits of st_other");
return 0;
}
namespace {
class PPC64 final : public TargetInfo {
public:
PPC64();
uint32_t calcEFlags() const override;
RelExpr getRelExpr(RelType Type, const Symbol &S,
const uint8_t *Loc) const override;
void writePltHeader(uint8_t *Buf) const override;
void writePlt(uint8_t *Buf, uint64_t GotPltEntryAddr, uint64_t PltEntryAddr,
int32_t Index, unsigned RelOff) const override;
void relocateOne(uint8_t *Loc, RelType Type, uint64_t Val) const override;
void writeGotHeader(uint8_t *Buf) const override;
bool needsThunk(RelExpr Expr, RelType Type, const InputFile *File,
uint64_t BranchAddr, const Symbol &S) const override;
bool inBranchRange(RelType Type, uint64_t Src, uint64_t Dst) const override;
RelExpr adjustRelaxExpr(RelType Type, const uint8_t *Data,
RelExpr Expr) const override;
void relaxTlsGdToIe(uint8_t *Loc, RelType Type, uint64_t Val) const override;
void relaxTlsGdToLe(uint8_t *Loc, RelType Type, uint64_t Val) const override;
void relaxTlsLdToLe(uint8_t *Loc, RelType Type, uint64_t Val) const override;
void relaxTlsIeToLe(uint8_t *Loc, RelType Type, uint64_t Val) const override;
bool adjustPrologueForCrossSplitStack(uint8_t *Loc, uint8_t *End,
uint8_t StOther) const override;
};
} // namespace
// Relocation masks following the #lo(value), #hi(value), #ha(value),
// #higher(value), #highera(value), #highest(value), and #highesta(value)
// macros defined in section 4.5.1. Relocation Types of the PPC-elf64abi
// document.
static uint16_t lo(uint64_t V) { return V; }
static uint16_t hi(uint64_t V) { return V >> 16; }
static uint16_t ha(uint64_t V) { return (V + 0x8000) >> 16; }
static uint16_t higher(uint64_t V) { return V >> 32; }
static uint16_t highera(uint64_t V) { return (V + 0x8000) >> 32; }
static uint16_t highest(uint64_t V) { return V >> 48; }
static uint16_t highesta(uint64_t V) { return (V + 0x8000) >> 48; }
// Extracts the 'PO' field of an instruction encoding.
static uint8_t getPrimaryOpCode(uint32_t Encoding) { return (Encoding >> 26); }
static bool isDQFormInstruction(uint32_t Encoding) {
switch (getPrimaryOpCode(Encoding)) {
default:
return false;
case 56:
// The only instruction with a primary opcode of 56 is `lq`.
return true;
case 61:
// There are both DS and DQ instruction forms with this primary opcode.
// Namely `lxv` and `stxv` are the DQ-forms that use it.
// The DS 'XO' bits being set to 01 is restricted to DQ form.
return (Encoding & 3) == 0x1;
}
}
static bool isInstructionUpdateForm(uint32_t Encoding) {
switch (getPrimaryOpCode(Encoding)) {
default:
return false;
case LBZU:
case LHAU:
case LHZU:
case LWZU:
case LFSU:
case LFDU:
case STBU:
case STHU:
case STWU:
case STFSU:
case STFDU:
return true;
// LWA has the same opcode as LD, and the DS bits is what differentiates
// between LD/LDU/LWA
case LD:
case STD:
return (Encoding & 3) == 1;
}
}
// There are a number of places when we either want to read or write an
// instruction when handling a half16 relocation type. On big-endian the buffer
// pointer is pointing into the middle of the word we want to extract, and on
// little-endian it is pointing to the start of the word. These 2 helpers are to
// simplify reading and writing in that context.
static void writeInstrFromHalf16(uint8_t *Loc, uint32_t Instr) {
write32(Loc - (Config->EKind == ELF64BEKind ? 2 : 0), Instr);
}
static uint32_t readInstrFromHalf16(const uint8_t *Loc) {
return read32(Loc - (Config->EKind == ELF64BEKind ? 2 : 0));
}
PPC64::PPC64() {
GotRel = R_PPC64_GLOB_DAT;
NoneRel = R_PPC64_NONE;
PltRel = R_PPC64_JMP_SLOT;
RelativeRel = R_PPC64_RELATIVE;
IRelativeRel = R_PPC64_IRELATIVE;
GotEntrySize = 8;
PltEntrySize = 4;
GotPltEntrySize = 8;
GotBaseSymInGotPlt = false;
GotBaseSymOff = 0x8000;
GotHeaderEntriesNum = 1;
GotPltHeaderEntriesNum = 2;
PltHeaderSize = 60;
NeedsThunks = true;
TlsModuleIndexRel = R_PPC64_DTPMOD64;
TlsOffsetRel = R_PPC64_DTPREL64;
TlsGotRel = R_PPC64_TPREL64;
NeedsMoreStackNonSplit = false;
// We need 64K pages (at least under glibc/Linux, the loader won't
// set different permissions on a finer granularity than that).
DefaultMaxPageSize = 65536;
// The PPC64 ELF ABI v1 spec, says:
//
// It is normally desirable to put segments with different characteristics
// in separate 256 Mbyte portions of the address space, to give the
// operating system full paging flexibility in the 64-bit address space.
//
// And because the lowest non-zero 256M boundary is 0x10000000, PPC64 linkers
// use 0x10000000 as the starting address.
DefaultImageBase = 0x10000000;
write32(TrapInstr.data(), 0x7fe00008);
}
static uint32_t getEFlags(InputFile *File) {
if (Config->EKind == ELF64BEKind)
return cast<ObjFile<ELF64BE>>(File)->getObj().getHeader()->e_flags;
return cast<ObjFile<ELF64LE>>(File)->getObj().getHeader()->e_flags;
}
// This file implements v2 ABI. This function makes sure that all
// object files have v2 or an unspecified version as an ABI version.
uint32_t PPC64::calcEFlags() const {
for (InputFile *F : ObjectFiles) {
uint32_t Flag = getEFlags(F);
if (Flag == 1)
error(toString(F) + ": ABI version 1 is not supported");
else if (Flag > 2)
error(toString(F) + ": unrecognized e_flags: " + Twine(Flag));
}
return 2;
}
void PPC64::relaxTlsGdToLe(uint8_t *Loc, RelType Type, uint64_t Val) const {
// Reference: 3.7.4.2 of the 64-bit ELF V2 abi supplement.
// The general dynamic code sequence for a global `x` will look like:
// Instruction Relocation Symbol
// addis r3, r2, x@got@tlsgd@ha R_PPC64_GOT_TLSGD16_HA x
// addi r3, r3, x@got@tlsgd@l R_PPC64_GOT_TLSGD16_LO x
// bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x
// R_PPC64_REL24 __tls_get_addr
// nop None None
// Relaxing to local exec entails converting:
// addis r3, r2, x@got@tlsgd@ha into nop
// addi r3, r3, x@got@tlsgd@l into addis r3, r13, x@tprel@ha
// bl __tls_get_addr(x@tlsgd) into nop
// nop into addi r3, r3, x@tprel@l
switch (Type) {
case R_PPC64_GOT_TLSGD16_HA:
writeInstrFromHalf16(Loc, 0x60000000); // nop
break;
case R_PPC64_GOT_TLSGD16:
case R_PPC64_GOT_TLSGD16_LO:
writeInstrFromHalf16(Loc, 0x3c6d0000); // addis r3, r13
relocateOne(Loc, R_PPC64_TPREL16_HA, Val);
break;
case R_PPC64_TLSGD:
write32(Loc, 0x60000000); // nop
write32(Loc + 4, 0x38630000); // addi r3, r3
// Since we are relocating a half16 type relocation and Loc + 4 points to
// the start of an instruction we need to advance the buffer by an extra
// 2 bytes on BE.
relocateOne(Loc + 4 + (Config->EKind == ELF64BEKind ? 2 : 0),
R_PPC64_TPREL16_LO, Val);
break;
default:
llvm_unreachable("unsupported relocation for TLS GD to LE relaxation");
}
}
void PPC64::relaxTlsLdToLe(uint8_t *Loc, RelType Type, uint64_t Val) const {
// Reference: 3.7.4.3 of the 64-bit ELF V2 abi supplement.
// The local dynamic code sequence for a global `x` will look like:
// Instruction Relocation Symbol
// addis r3, r2, x@got@tlsld@ha R_PPC64_GOT_TLSLD16_HA x
// addi r3, r3, x@got@tlsld@l R_PPC64_GOT_TLSLD16_LO x
// bl __tls_get_addr(x@tlsgd) R_PPC64_TLSLD x
// R_PPC64_REL24 __tls_get_addr
// nop None None
// Relaxing to local exec entails converting:
// addis r3, r2, x@got@tlsld@ha into nop
// addi r3, r3, x@got@tlsld@l into addis r3, r13, 0
// bl __tls_get_addr(x@tlsgd) into nop
// nop into addi r3, r3, 4096
switch (Type) {
case R_PPC64_GOT_TLSLD16_HA:
writeInstrFromHalf16(Loc, 0x60000000); // nop
break;
case R_PPC64_GOT_TLSLD16_LO:
writeInstrFromHalf16(Loc, 0x3c6d0000); // addis r3, r13, 0
break;
case R_PPC64_TLSLD:
write32(Loc, 0x60000000); // nop
write32(Loc + 4, 0x38631000); // addi r3, r3, 4096
break;
case R_PPC64_DTPREL16:
case R_PPC64_DTPREL16_HA:
case R_PPC64_DTPREL16_HI:
case R_PPC64_DTPREL16_DS:
case R_PPC64_DTPREL16_LO:
case R_PPC64_DTPREL16_LO_DS:
case R_PPC64_GOT_DTPREL16_HA:
case R_PPC64_GOT_DTPREL16_LO_DS:
case R_PPC64_GOT_DTPREL16_DS:
case R_PPC64_GOT_DTPREL16_HI:
relocateOne(Loc, Type, Val);
break;
default:
llvm_unreachable("unsupported relocation for TLS LD to LE relaxation");
}
}
static unsigned getDFormOp(unsigned SecondaryOp) {
switch (SecondaryOp) {
case LBZX:
return LBZ;
case LHZX:
return LHZ;
case LWZX:
return LWZ;
case LDX:
return LD;
case STBX:
return STB;
case STHX:
return STH;
case STWX:
return STW;
case STDX:
return STD;
case ADD:
return ADDI;
default:
error("unrecognized instruction for IE to LE R_PPC64_TLS");
return 0;
}
}
void PPC64::relaxTlsIeToLe(uint8_t *Loc, RelType Type, uint64_t Val) const {
// The initial exec code sequence for a global `x` will look like:
// Instruction Relocation Symbol
// addis r9, r2, x@got@tprel@ha R_PPC64_GOT_TPREL16_HA x
// ld r9, x@got@tprel@l(r9) R_PPC64_GOT_TPREL16_LO_DS x
// add r9, r9, x@tls R_PPC64_TLS x
// Relaxing to local exec entails converting:
// addis r9, r2, x@got@tprel@ha into nop
// ld r9, x@got@tprel@l(r9) into addis r9, r13, x@tprel@ha
// add r9, r9, x@tls into addi r9, r9, x@tprel@l
// x@tls R_PPC64_TLS is a relocation which does not compute anything,
// it is replaced with r13 (thread pointer).
// The add instruction in the initial exec sequence has multiple variations
// that need to be handled. If we are building an address it will use an add
// instruction, if we are accessing memory it will use any of the X-form
// indexed load or store instructions.
unsigned Offset = (Config->EKind == ELF64BEKind) ? 2 : 0;
switch (Type) {
case R_PPC64_GOT_TPREL16_HA:
write32(Loc - Offset, 0x60000000); // nop
break;
case R_PPC64_GOT_TPREL16_LO_DS:
case R_PPC64_GOT_TPREL16_DS: {
uint32_t RegNo = read32(Loc - Offset) & 0x03E00000; // bits 6-10
write32(Loc - Offset, 0x3C0D0000 | RegNo); // addis RegNo, r13
relocateOne(Loc, R_PPC64_TPREL16_HA, Val);
break;
}
case R_PPC64_TLS: {
uint32_t PrimaryOp = getPrimaryOpCode(read32(Loc));
if (PrimaryOp != 31)
error("unrecognized instruction for IE to LE R_PPC64_TLS");
uint32_t SecondaryOp = (read32(Loc) & 0x000007FE) >> 1; // bits 21-30
uint32_t DFormOp = getDFormOp(SecondaryOp);
write32(Loc, ((DFormOp << 26) | (read32(Loc) & 0x03FFFFFF)));
relocateOne(Loc + Offset, R_PPC64_TPREL16_LO, Val);
break;
}
default:
llvm_unreachable("unknown relocation for IE to LE");
break;
}
}
RelExpr PPC64::getRelExpr(RelType Type, const Symbol &S,
const uint8_t *Loc) const {
switch (Type) {
case R_PPC64_GOT16:
case R_PPC64_GOT16_DS:
case R_PPC64_GOT16_HA:
case R_PPC64_GOT16_HI:
case R_PPC64_GOT16_LO:
case R_PPC64_GOT16_LO_DS:
return R_GOT_OFF;
case R_PPC64_TOC16:
case R_PPC64_TOC16_DS:
case R_PPC64_TOC16_HA:
case R_PPC64_TOC16_HI:
case R_PPC64_TOC16_LO:
case R_PPC64_TOC16_LO_DS:
return R_GOTREL;
case R_PPC64_TOC:
return R_PPC_TOC;
case R_PPC64_REL14:
case R_PPC64_REL24:
return R_PPC_CALL_PLT;
case R_PPC64_REL16_LO:
case R_PPC64_REL16_HA:
case R_PPC64_REL32:
case R_PPC64_REL64:
return R_PC;
case R_PPC64_GOT_TLSGD16:
case R_PPC64_GOT_TLSGD16_HA:
case R_PPC64_GOT_TLSGD16_HI:
case R_PPC64_GOT_TLSGD16_LO:
return R_TLSGD_GOT;
case R_PPC64_GOT_TLSLD16:
case R_PPC64_GOT_TLSLD16_HA:
case R_PPC64_GOT_TLSLD16_HI:
case R_PPC64_GOT_TLSLD16_LO:
return R_TLSLD_GOT;
case R_PPC64_GOT_TPREL16_HA:
case R_PPC64_GOT_TPREL16_LO_DS:
case R_PPC64_GOT_TPREL16_DS:
case R_PPC64_GOT_TPREL16_HI:
return R_GOT_OFF;
case R_PPC64_GOT_DTPREL16_HA:
case R_PPC64_GOT_DTPREL16_LO_DS:
case R_PPC64_GOT_DTPREL16_DS:
case R_PPC64_GOT_DTPREL16_HI:
return R_TLSLD_GOT_OFF;
case R_PPC64_TPREL16:
case R_PPC64_TPREL16_HA:
case R_PPC64_TPREL16_LO:
case R_PPC64_TPREL16_HI:
case R_PPC64_TPREL16_DS:
case R_PPC64_TPREL16_LO_DS:
case R_PPC64_TPREL16_HIGHER:
case R_PPC64_TPREL16_HIGHERA:
case R_PPC64_TPREL16_HIGHEST:
case R_PPC64_TPREL16_HIGHESTA:
return R_TLS;
case R_PPC64_DTPREL16:
case R_PPC64_DTPREL16_DS:
case R_PPC64_DTPREL16_HA:
case R_PPC64_DTPREL16_HI:
case R_PPC64_DTPREL16_HIGHER:
case R_PPC64_DTPREL16_HIGHERA:
case R_PPC64_DTPREL16_HIGHEST:
case R_PPC64_DTPREL16_HIGHESTA:
case R_PPC64_DTPREL16_LO:
case R_PPC64_DTPREL16_LO_DS:
case R_PPC64_DTPREL64:
return R_ABS;
case R_PPC64_TLSGD:
return R_TLSDESC_CALL;
case R_PPC64_TLSLD:
return R_TLSLD_HINT;
case R_PPC64_TLS:
return R_TLSIE_HINT;
default:
return R_ABS;
}
}
void PPC64::writeGotHeader(uint8_t *Buf) const {
write64(Buf, getPPC64TocBase());
}
void PPC64::writePltHeader(uint8_t *Buf) const {
// The generic resolver stub goes first.
write32(Buf + 0, 0x7c0802a6); // mflr r0
write32(Buf + 4, 0x429f0005); // bcl 20,4*cr7+so,8 <_glink+0x8>
write32(Buf + 8, 0x7d6802a6); // mflr r11
write32(Buf + 12, 0x7c0803a6); // mtlr r0
write32(Buf + 16, 0x7d8b6050); // subf r12, r11, r12
write32(Buf + 20, 0x380cffcc); // subi r0,r12,52
write32(Buf + 24, 0x7800f082); // srdi r0,r0,62,2
write32(Buf + 28, 0xe98b002c); // ld r12,44(r11)
write32(Buf + 32, 0x7d6c5a14); // add r11,r12,r11
write32(Buf + 36, 0xe98b0000); // ld r12,0(r11)
write32(Buf + 40, 0xe96b0008); // ld r11,8(r11)
write32(Buf + 44, 0x7d8903a6); // mtctr r12
write32(Buf + 48, 0x4e800420); // bctr
// The 'bcl' instruction will set the link register to the address of the
// following instruction ('mflr r11'). Here we store the offset from that
// instruction to the first entry in the GotPlt section.
int64_t GotPltOffset = In.GotPlt->getVA() - (In.Plt->getVA() + 8);
write64(Buf + 52, GotPltOffset);
}
void PPC64::writePlt(uint8_t *Buf, uint64_t GotPltEntryAddr,
uint64_t PltEntryAddr, int32_t Index,
unsigned RelOff) const {
int32_t Offset = PltHeaderSize + Index * PltEntrySize;
// bl __glink_PLTresolve
write32(Buf, 0x48000000 | ((-Offset) & 0x03FFFFFc));
}
static std::pair<RelType, uint64_t> toAddr16Rel(RelType Type, uint64_t Val) {
// Relocations relative to the toc-base need to be adjusted by the Toc offset.
uint64_t TocBiasedVal = Val - PPC64TocOffset;
// Relocations relative to dtv[dtpmod] need to be adjusted by the DTP offset.
uint64_t DTPBiasedVal = Val - DynamicThreadPointerOffset;
switch (Type) {
// TOC biased relocation.
case R_PPC64_GOT16:
case R_PPC64_GOT_TLSGD16:
case R_PPC64_GOT_TLSLD16:
case R_PPC64_TOC16:
return {R_PPC64_ADDR16, TocBiasedVal};
case R_PPC64_GOT16_DS:
case R_PPC64_TOC16_DS:
case R_PPC64_GOT_TPREL16_DS:
case R_PPC64_GOT_DTPREL16_DS:
return {R_PPC64_ADDR16_DS, TocBiasedVal};
case R_PPC64_GOT16_HA:
case R_PPC64_GOT_TLSGD16_HA:
case R_PPC64_GOT_TLSLD16_HA:
case R_PPC64_GOT_TPREL16_HA:
case R_PPC64_GOT_DTPREL16_HA:
case R_PPC64_TOC16_HA:
return {R_PPC64_ADDR16_HA, TocBiasedVal};
case R_PPC64_GOT16_HI:
case R_PPC64_GOT_TLSGD16_HI:
case R_PPC64_GOT_TLSLD16_HI:
case R_PPC64_GOT_TPREL16_HI:
case R_PPC64_GOT_DTPREL16_HI:
case R_PPC64_TOC16_HI:
return {R_PPC64_ADDR16_HI, TocBiasedVal};
case R_PPC64_GOT16_LO:
case R_PPC64_GOT_TLSGD16_LO:
case R_PPC64_GOT_TLSLD16_LO:
case R_PPC64_TOC16_LO:
return {R_PPC64_ADDR16_LO, TocBiasedVal};
case R_PPC64_GOT16_LO_DS:
case R_PPC64_TOC16_LO_DS:
case R_PPC64_GOT_TPREL16_LO_DS:
case R_PPC64_GOT_DTPREL16_LO_DS:
return {R_PPC64_ADDR16_LO_DS, TocBiasedVal};
// Dynamic Thread pointer biased relocation types.
case R_PPC64_DTPREL16:
return {R_PPC64_ADDR16, DTPBiasedVal};
case R_PPC64_DTPREL16_DS:
return {R_PPC64_ADDR16_DS, DTPBiasedVal};
case R_PPC64_DTPREL16_HA:
return {R_PPC64_ADDR16_HA, DTPBiasedVal};
case R_PPC64_DTPREL16_HI:
return {R_PPC64_ADDR16_HI, DTPBiasedVal};
case R_PPC64_DTPREL16_HIGHER:
return {R_PPC64_ADDR16_HIGHER, DTPBiasedVal};
case R_PPC64_DTPREL16_HIGHERA:
return {R_PPC64_ADDR16_HIGHERA, DTPBiasedVal};
case R_PPC64_DTPREL16_HIGHEST:
return {R_PPC64_ADDR16_HIGHEST, DTPBiasedVal};
case R_PPC64_DTPREL16_HIGHESTA:
return {R_PPC64_ADDR16_HIGHESTA, DTPBiasedVal};
case R_PPC64_DTPREL16_LO:
return {R_PPC64_ADDR16_LO, DTPBiasedVal};
case R_PPC64_DTPREL16_LO_DS:
return {R_PPC64_ADDR16_LO_DS, DTPBiasedVal};
case R_PPC64_DTPREL64:
return {R_PPC64_ADDR64, DTPBiasedVal};
default:
return {Type, Val};
}
}
static bool isTocOptType(RelType Type) {
switch (Type) {
case R_PPC64_GOT16_HA:
case R_PPC64_GOT16_LO_DS:
case R_PPC64_TOC16_HA:
case R_PPC64_TOC16_LO_DS:
case R_PPC64_TOC16_LO:
return true;
default:
return false;
}
}
void PPC64::relocateOne(uint8_t *Loc, RelType Type, uint64_t Val) const {
// We need to save the original relocation type to use in diagnostics, and
// use the original type to determine if we should toc-optimize the
// instructions being relocated.
RelType OriginalType = Type;
bool ShouldTocOptimize = isTocOptType(Type);
// For dynamic thread pointer relative, toc-relative, and got-indirect
// relocations, proceed in terms of the corresponding ADDR16 relocation type.
std::tie(Type, Val) = toAddr16Rel(Type, Val);
switch (Type) {
case R_PPC64_ADDR14: {
checkAlignment(Loc, Val, 4, Type);
// Preserve the AA/LK bits in the branch instruction
uint8_t AALK = Loc[3];
write16(Loc + 2, (AALK & 3) | (Val & 0xfffc));
break;
}
case R_PPC64_ADDR16:
case R_PPC64_TPREL16:
checkInt(Loc, Val, 16, OriginalType);
write16(Loc, Val);
break;
case R_PPC64_ADDR16_DS:
case R_PPC64_TPREL16_DS: {
checkInt(Loc, Val, 16, OriginalType);
// DQ-form instructions use bits 28-31 as part of the instruction encoding
// DS-form instructions only use bits 30-31.
uint16_t Mask = isDQFormInstruction(readInstrFromHalf16(Loc)) ? 0xF : 0x3;
checkAlignment(Loc, lo(Val), Mask + 1, OriginalType);
write16(Loc, (read16(Loc) & Mask) | lo(Val));
} break;
case R_PPC64_ADDR16_HA:
case R_PPC64_REL16_HA:
case R_PPC64_TPREL16_HA:
if (Config->TocOptimize && ShouldTocOptimize && ha(Val) == 0)
writeInstrFromHalf16(Loc, 0x60000000);
else
write16(Loc, ha(Val));
break;
case R_PPC64_ADDR16_HI:
case R_PPC64_REL16_HI:
case R_PPC64_TPREL16_HI:
write16(Loc, hi(Val));
break;
case R_PPC64_ADDR16_HIGHER:
case R_PPC64_TPREL16_HIGHER:
write16(Loc, higher(Val));
break;
case R_PPC64_ADDR16_HIGHERA:
case R_PPC64_TPREL16_HIGHERA:
write16(Loc, highera(Val));
break;
case R_PPC64_ADDR16_HIGHEST:
case R_PPC64_TPREL16_HIGHEST:
write16(Loc, highest(Val));
break;
case R_PPC64_ADDR16_HIGHESTA:
case R_PPC64_TPREL16_HIGHESTA:
write16(Loc, highesta(Val));
break;
case R_PPC64_ADDR16_LO:
case R_PPC64_REL16_LO:
case R_PPC64_TPREL16_LO:
// When the high-adjusted part of a toc relocation evalutes to 0, it is
// changed into a nop. The lo part then needs to be updated to use the
// toc-pointer register r2, as the base register.
if (Config->TocOptimize && ShouldTocOptimize && ha(Val) == 0) {
uint32_t Instr = readInstrFromHalf16(Loc);
if (isInstructionUpdateForm(Instr))
error(getErrorLocation(Loc) +
"can't toc-optimize an update instruction: 0x" +
utohexstr(Instr));
Instr = (Instr & 0xFFE00000) | 0x00020000;
writeInstrFromHalf16(Loc, Instr);
}
write16(Loc, lo(Val));
break;
case R_PPC64_ADDR16_LO_DS:
case R_PPC64_TPREL16_LO_DS: {
// DQ-form instructions use bits 28-31 as part of the instruction encoding
// DS-form instructions only use bits 30-31.
uint32_t Inst = readInstrFromHalf16(Loc);
uint16_t Mask = isDQFormInstruction(Inst) ? 0xF : 0x3;
checkAlignment(Loc, lo(Val), Mask + 1, OriginalType);
if (Config->TocOptimize && ShouldTocOptimize && ha(Val) == 0) {
// When the high-adjusted part of a toc relocation evalutes to 0, it is
// changed into a nop. The lo part then needs to be updated to use the toc
// pointer register r2, as the base register.
if (isInstructionUpdateForm(Inst))
error(getErrorLocation(Loc) +
"Can't toc-optimize an update instruction: 0x" +
Twine::utohexstr(Inst));
Inst = (Inst & 0xFFE0000F) | 0x00020000;
writeInstrFromHalf16(Loc, Inst);
}
write16(Loc, (read16(Loc) & Mask) | lo(Val));
} break;
case R_PPC64_ADDR32:
case R_PPC64_REL32:
checkInt(Loc, Val, 32, Type);
write32(Loc, Val);
break;
case R_PPC64_ADDR64:
case R_PPC64_REL64:
case R_PPC64_TOC:
write64(Loc, Val);
break;
case R_PPC64_REL14: {
uint32_t Mask = 0x0000FFFC;
checkInt(Loc, Val, 16, Type);
checkAlignment(Loc, Val, 4, Type);
write32(Loc, (read32(Loc) & ~Mask) | (Val & Mask));
break;
}
case R_PPC64_REL24: {
uint32_t Mask = 0x03FFFFFC;
checkInt(Loc, Val, 26, Type);
checkAlignment(Loc, Val, 4, Type);
write32(Loc, (read32(Loc) & ~Mask) | (Val & Mask));
break;
}
case R_PPC64_DTPREL64:
write64(Loc, Val - DynamicThreadPointerOffset);
break;
default:
error(getErrorLocation(Loc) + "unrecognized reloc " + Twine(Type));
}
}
bool PPC64::needsThunk(RelExpr Expr, RelType Type, const InputFile *File,
uint64_t BranchAddr, const Symbol &S) const {
if (Type != R_PPC64_REL14 && Type != R_PPC64_REL24)
return false;
// If a function is in the Plt it needs to be called with a call-stub.
if (S.isInPlt())
return true;
// If a symbol is a weak undefined and we are compiling an executable
// it doesn't need a range-extending thunk since it can't be called.
if (S.isUndefWeak() && !Config->Shared)
return false;
// If the offset exceeds the range of the branch type then it will need
// a range-extending thunk.
return !inBranchRange(Type, BranchAddr, S.getVA());
}
bool PPC64::inBranchRange(RelType Type, uint64_t Src, uint64_t Dst) const {
int64_t Offset = Dst - Src;
if (Type == R_PPC64_REL14)
return isInt<16>(Offset);
if (Type == R_PPC64_REL24)
return isInt<26>(Offset);
llvm_unreachable("unsupported relocation type used in branch");
}
RelExpr PPC64::adjustRelaxExpr(RelType Type, const uint8_t *Data,
RelExpr Expr) const {
if (Expr == R_RELAX_TLS_GD_TO_IE)
return R_RELAX_TLS_GD_TO_IE_GOT_OFF;
if (Expr == R_RELAX_TLS_LD_TO_LE)
return R_RELAX_TLS_LD_TO_LE_ABS;
return Expr;
}
// Reference: 3.7.4.1 of the 64-bit ELF V2 abi supplement.
// The general dynamic code sequence for a global `x` uses 4 instructions.
// Instruction Relocation Symbol
// addis r3, r2, x@got@tlsgd@ha R_PPC64_GOT_TLSGD16_HA x
// addi r3, r3, x@got@tlsgd@l R_PPC64_GOT_TLSGD16_LO x
// bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x
// R_PPC64_REL24 __tls_get_addr
// nop None None
//
// Relaxing to initial-exec entails:
// 1) Convert the addis/addi pair that builds the address of the tls_index
// struct for 'x' to an addis/ld pair that loads an offset from a got-entry.
// 2) Convert the call to __tls_get_addr to a nop.
// 3) Convert the nop following the call to an add of the loaded offset to the
// thread pointer.
// Since the nop must directly follow the call, the R_PPC64_TLSGD relocation is
// used as the relaxation hint for both steps 2 and 3.
void PPC64::relaxTlsGdToIe(uint8_t *Loc, RelType Type, uint64_t Val) const {
switch (Type) {
case R_PPC64_GOT_TLSGD16_HA:
// This is relaxed from addis rT, r2, sym@got@tlsgd@ha to
// addis rT, r2, sym@got@tprel@ha.
relocateOne(Loc, R_PPC64_GOT_TPREL16_HA, Val);
return;
case R_PPC64_GOT_TLSGD16_LO: {
// Relax from addi r3, rA, sym@got@tlsgd@l to
// ld r3, sym@got@tprel@l(rA)
uint32_t InputRegister = (readInstrFromHalf16(Loc) & (0x1f << 16));
writeInstrFromHalf16(Loc, 0xE8600000 | InputRegister);
relocateOne(Loc, R_PPC64_GOT_TPREL16_LO_DS, Val);
return;
}
case R_PPC64_TLSGD:
write32(Loc, 0x60000000); // bl __tls_get_addr(sym@tlsgd) --> nop
write32(Loc + 4, 0x7c636A14); // nop --> add r3, r3, r13
return;
default:
llvm_unreachable("unsupported relocation for TLS GD to IE relaxation");
}
}
// The prologue for a split-stack function is expected to look roughly
// like this:
// .Lglobal_entry_point:
// # TOC pointer initalization.
// ...
// .Llocal_entry_point:
// # load the __private_ss member of the threads tcbhead.
// ld r0,-0x7000-64(r13)
// # subtract the functions stack size from the stack pointer.
// addis r12, r1, ha(-stack-frame size)
// addi r12, r12, l(-stack-frame size)
// # compare needed to actual and branch to allocate_more_stack if more
// # space is needed, otherwise fallthrough to 'normal' function body.
// cmpld cr7,r12,r0
// blt- cr7, .Lallocate_more_stack
//
// -) The allocate_more_stack block might be placed after the split-stack
// prologue and the `blt-` replaced with a `bge+ .Lnormal_func_body`
// instead.
// -) If either the addis or addi is not needed due to the stack size being
// smaller then 32K or a multiple of 64K they will be replaced with a nop,
// but there will always be 2 instructions the linker can overwrite for the
// adjusted stack size.
//
// The linkers job here is to increase the stack size used in the addis/addi
// pair by split-stack-size-adjust.
// addis r12, r1, ha(-stack-frame size - split-stack-adjust-size)
// addi r12, r12, l(-stack-frame size - split-stack-adjust-size)
bool PPC64::adjustPrologueForCrossSplitStack(uint8_t *Loc, uint8_t *End,
uint8_t StOther) const {
// If the caller has a global entry point adjust the buffer past it. The start
// of the split-stack prologue will be at the local entry point.
Loc += getPPC64GlobalEntryToLocalEntryOffset(StOther);
// At the very least we expect to see a load of some split-stack data from the
// tcb, and 2 instructions that calculate the ending stack address this
// function will require. If there is not enough room for at least 3
// instructions it can't be a split-stack prologue.
if (Loc + 12 >= End)
return false;
// First instruction must be `ld r0, -0x7000-64(r13)`
if (read32(Loc) != 0xe80d8fc0)
return false;
int16_t HiImm = 0;
int16_t LoImm = 0;
// First instruction can be either an addis if the frame size is larger then
// 32K, or an addi if the size is less then 32K.
int32_t FirstInstr = read32(Loc + 4);
if (getPrimaryOpCode(FirstInstr) == 15) {
HiImm = FirstInstr & 0xFFFF;
} else if (getPrimaryOpCode(FirstInstr) == 14) {
LoImm = FirstInstr & 0xFFFF;
} else {
return false;
}
// Second instruction is either an addi or a nop. If the first instruction was
// an addi then LoImm is set and the second instruction must be a nop.
uint32_t SecondInstr = read32(Loc + 8);
if (!LoImm && getPrimaryOpCode(SecondInstr) == 14) {
LoImm = SecondInstr & 0xFFFF;
} else if (SecondInstr != 0x60000000) {
return false;
}
// The register operands of the first instruction should be the stack-pointer
// (r1) as the input (RA) and r12 as the output (RT). If the second
// instruction is not a nop, then it should use r12 as both input and output.
auto CheckRegOperands = [](uint32_t Instr, uint8_t ExpectedRT,
uint8_t ExpectedRA) {
return ((Instr & 0x3E00000) >> 21 == ExpectedRT) &&
((Instr & 0x1F0000) >> 16 == ExpectedRA);
};
if (!CheckRegOperands(FirstInstr, 12, 1))
return false;
if (SecondInstr != 0x60000000 && !CheckRegOperands(SecondInstr, 12, 12))
return false;
int32_t StackFrameSize = (HiImm * 65536) + LoImm;
// Check that the adjusted size doesn't overflow what we can represent with 2
// instructions.
if (StackFrameSize < Config->SplitStackAdjustSize + INT32_MIN) {
error(getErrorLocation(Loc) + "split-stack prologue adjustment overflows");
return false;
}
int32_t AdjustedStackFrameSize =
StackFrameSize - Config->SplitStackAdjustSize;
LoImm = AdjustedStackFrameSize & 0xFFFF;
HiImm = (AdjustedStackFrameSize + 0x8000) >> 16;
if (HiImm) {
write32(Loc + 4, 0x3D810000 | (uint16_t)HiImm);
// If the low immediate is zero the second instruction will be a nop.
SecondInstr = LoImm ? 0x398C0000 | (uint16_t)LoImm : 0x60000000;
write32(Loc + 8, SecondInstr);
} else {
// addi r12, r1, imm
write32(Loc + 4, (0x39810000) | (uint16_t)LoImm);
write32(Loc + 8, 0x60000000);
}
return true;
}
TargetInfo *elf::getPPC64TargetInfo() {
static PPC64 Target;
return &Target;
}
Reference in New Issue View Git Blame Copy Permalink