llvm-project/llvm/test/CodeGen/X86/movtopush.ll

383 lines
11 KiB
LLVM

; RUN: llc < %s -mtriple=i686-windows | FileCheck %s -check-prefix=NORMAL
; RUN: llc < %s -mtriple=x86_64-windows | FileCheck %s -check-prefix=X64
; RUN: llc < %s -mtriple=i686-windows -force-align-stack -stack-alignment=32 | FileCheck %s -check-prefix=ALIGNED
%class.Class = type { i32 }
%struct.s = type { i64 }
declare void @good(i32 %a, i32 %b, i32 %c, i32 %d)
declare void @inreg(i32 %a, i32 inreg %b, i32 %c, i32 %d)
declare x86_thiscallcc void @thiscall(%class.Class* %class, i32 %a, i32 %b, i32 %c, i32 %d)
declare void @oneparam(i32 %a)
declare void @eightparams(i32 %a, i32 %b, i32 %c, i32 %d, i32 %e, i32 %f, i32 %g, i32 %h)
declare void @struct(%struct.s* byval %a, i32 %b, i32 %c, i32 %d)
; Here, we should have a reserved frame, so we don't expect pushes
; NORMAL-LABEL: test1:
; NORMAL: subl $16, %esp
; NORMAL-NEXT: movl $4, 12(%esp)
; NORMAL-NEXT: movl $3, 8(%esp)
; NORMAL-NEXT: movl $2, 4(%esp)
; NORMAL-NEXT: movl $1, (%esp)
; NORMAL-NEXT: call
; NORMAL-NEXT: addl $16, %esp
define void @test1() {
entry:
call void @good(i32 1, i32 2, i32 3, i32 4)
ret void
}
; We're optimizing for code size, so we should get pushes for x86,
; even though there is a reserved call frame.
; Make sure we don't touch x86-64
; NORMAL-LABEL: test1b:
; NORMAL-NOT: subl {{.*}} %esp
; NORMAL: pushl $4
; NORMAL-NEXT: pushl $3
; NORMAL-NEXT: pushl $2
; NORMAL-NEXT: pushl $1
; NORMAL-NEXT: call
; NORMAL-NEXT: addl $16, %esp
; X64-LABEL: test1b:
; X64: movl $1, %ecx
; X64-NEXT: movl $2, %edx
; X64-NEXT: movl $3, %r8d
; X64-NEXT: movl $4, %r9d
; X64-NEXT: callq good
define void @test1b() optsize {
entry:
call void @good(i32 1, i32 2, i32 3, i32 4)
ret void
}
; Same as above, but for minsize
; NORMAL-LABEL: test1c:
; NORMAL-NOT: subl {{.*}} %esp
; NORMAL: pushl $4
; NORMAL-NEXT: pushl $3
; NORMAL-NEXT: pushl $2
; NORMAL-NEXT: pushl $1
; NORMAL-NEXT: call
; NORMAL-NEXT: addl $16, %esp
define void @test1c() minsize {
entry:
call void @good(i32 1, i32 2, i32 3, i32 4)
ret void
}
; If we have a reserved frame, we should have pushes
; NORMAL-LABEL: test2:
; NORMAL-NOT: subl {{.*}} %esp
; NORMAL: pushl $4
; NORMAL-NEXT: pushl $3
; NORMAL-NEXT: pushl $2
; NORMAL-NEXT: pushl $1
; NORMAL-NEXT: call
define void @test2(i32 %k) {
entry:
%a = alloca i32, i32 %k
call void @good(i32 1, i32 2, i32 3, i32 4)
ret void
}
; Again, we expect a sequence of 4 immediate pushes
; Checks that we generate the right pushes for >8bit immediates
; NORMAL-LABEL: test2b:
; NORMAL-NOT: subl {{.*}} %esp
; NORMAL: pushl $4096
; NORMAL-NEXT: pushl $3072
; NORMAL-NEXT: pushl $2048
; NORMAL-NEXT: pushl $1024
; NORMAL-NEXT: call
; NORMAL-NEXT: addl $16, %esp
define void @test2b() optsize {
entry:
call void @good(i32 1024, i32 2048, i32 3072, i32 4096)
ret void
}
; The first push should push a register
; NORMAL-LABEL: test3:
; NORMAL-NOT: subl {{.*}} %esp
; NORMAL: pushl $4
; NORMAL-NEXT: pushl $3
; NORMAL-NEXT: pushl $2
; NORMAL-NEXT: pushl %e{{..}}
; NORMAL-NEXT: call
; NORMAL-NEXT: addl $16, %esp
define void @test3(i32 %k) optsize {
entry:
%f = add i32 %k, 1
call void @good(i32 %f, i32 2, i32 3, i32 4)
ret void
}
; We support weird calling conventions
; NORMAL-LABEL: test4:
; NORMAL: movl $2, %eax
; NORMAL-NEXT: pushl $4
; NORMAL-NEXT: pushl $3
; NORMAL-NEXT: pushl $1
; NORMAL-NEXT: call
; NORMAL-NEXT: addl $12, %esp
define void @test4() optsize {
entry:
call void @inreg(i32 1, i32 2, i32 3, i32 4)
ret void
}
; NORMAL-LABEL: test4b:
; NORMAL: movl 4(%esp), %ecx
; NORMAL-NEXT: pushl $4
; NORMAL-NEXT: pushl $3
; NORMAL-NEXT: pushl $2
; NORMAL-NEXT: pushl $1
; NORMAL-NEXT: call
; NORMAL-NEXT: ret
define void @test4b(%class.Class* %f) optsize {
entry:
call x86_thiscallcc void @thiscall(%class.Class* %f, i32 1, i32 2, i32 3, i32 4)
ret void
}
; When there is no reserved call frame, check that additional alignment
; is added when the pushes don't add up to the required alignment.
; ALIGNED-LABEL: test5:
; ALIGNED: subl $16, %esp
; ALIGNED-NEXT: pushl $4
; ALIGNED-NEXT: pushl $3
; ALIGNED-NEXT: pushl $2
; ALIGNED-NEXT: pushl $1
; ALIGNED-NEXT: call
define void @test5(i32 %k) {
entry:
%a = alloca i32, i32 %k
call void @good(i32 1, i32 2, i32 3, i32 4)
ret void
}
; When the alignment adds up, do the transformation
; ALIGNED-LABEL: test5b:
; ALIGNED: pushl $8
; ALIGNED-NEXT: pushl $7
; ALIGNED-NEXT: pushl $6
; ALIGNED-NEXT: pushl $5
; ALIGNED-NEXT: pushl $4
; ALIGNED-NEXT: pushl $3
; ALIGNED-NEXT: pushl $2
; ALIGNED-NEXT: pushl $1
; ALIGNED-NEXT: call
define void @test5b() optsize {
entry:
call void @eightparams(i32 1, i32 2, i32 3, i32 4, i32 5, i32 6, i32 7, i32 8)
ret void
}
; When having to compensate for the alignment isn't worth it,
; don't use pushes.
; ALIGNED-LABEL: test5c:
; ALIGNED: movl $1, (%esp)
; ALIGNED-NEXT: call
define void @test5c() optsize {
entry:
call void @oneparam(i32 1)
ret void
}
; Check that pushing the addresses of globals (Or generally, things that
; aren't exactly immediates) isn't broken.
; Fixes PR21878.
; NORMAL-LABEL: test6:
; NORMAL: pushl $_ext
; NORMAL-NEXT: call
declare void @f(i8*)
@ext = external constant i8
define void @test6() {
call void @f(i8* @ext)
br label %bb
bb:
alloca i32
ret void
}
; Check that we fold simple cases into the push
; NORMAL-LABEL: test7:
; NORMAL-NOT: subl {{.*}} %esp
; NORMAL: movl 4(%esp), [[EAX:%e..]]
; NORMAL-NEXT: pushl $4
; NORMAL-NEXT: pushl ([[EAX]])
; NORMAL-NEXT: pushl $2
; NORMAL-NEXT: pushl $1
; NORMAL-NEXT: call
; NORMAL-NEXT: addl $16, %esp
define void @test7(i32* %ptr) optsize {
entry:
%val = load i32, i32* %ptr
call void @good(i32 1, i32 2, i32 %val, i32 4)
ret void
}
; Fold stack-relative loads into the push, with correct offset
; In particular, at the second push, %b was at 12(%esp) and
; %a wast at 8(%esp), but the second push bumped %esp, so %a
; is now it at 12(%esp)
; NORMAL-LABEL: test8:
; NORMAL: pushl $4
; NORMAL-NEXT: pushl 12(%esp)
; NORMAL-NEXT: pushl 12(%esp)
; NORMAL-NEXT: pushl $1
; NORMAL-NEXT: call
; NORMAL-NEXT: addl $16, %esp
define void @test8(i32 %a, i32 %b) optsize {
entry:
call void @good(i32 1, i32 %a, i32 %b, i32 4)
ret void
}
; If one function is using push instructions, and the other isn't
; (because it has frame-index references), then we must resolve
; these references correctly.
; NORMAL-LABEL: test9:
; NORMAL-NOT: leal (%esp),
; NORMAL: pushl $4
; NORMAL-NEXT: pushl $3
; NORMAL-NEXT: pushl $2
; NORMAL-NEXT: pushl $1
; NORMAL-NEXT: call
; NORMAL-NEXT: addl $16, %esp
; NORMAL-NEXT: subl $20, %esp
; NORMAL-NEXT: movl 20(%esp), [[E1:%e..]]
; NORMAL-NEXT: movl 24(%esp), [[E2:%e..]]
; NORMAL-NEXT: movl [[E2]], 4(%esp)
; NORMAL-NEXT: movl [[E1]], (%esp)
; NORMAL-NEXT: leal 32(%esp), [[E3:%e..]]
; NORMAL-NEXT: movl [[E3]], 16(%esp)
; NORMAL-NEXT: leal 28(%esp), [[E4:%e..]]
; NORMAL-NEXT: movl [[E4]], 12(%esp)
; NORMAL-NEXT: movl $6, 8(%esp)
; NORMAL-NEXT: call
; NORMAL-NEXT: addl $20, %esp
define void @test9() optsize {
entry:
%p = alloca i32, align 4
%q = alloca i32, align 4
%s = alloca %struct.s, align 4
call void @good(i32 1, i32 2, i32 3, i32 4)
%pv = ptrtoint i32* %p to i32
%qv = ptrtoint i32* %q to i32
call void @struct(%struct.s* byval %s, i32 6, i32 %qv, i32 %pv)
ret void
}
; We can end up with an indirect call which gets reloaded on the spot.
; Make sure we reference the correct stack slot - we spill into (%esp)
; and reload from 16(%esp) due to the pushes.
; NORMAL-LABEL: test10:
; NORMAL: movl $_good, [[ALLOC:.*]]
; NORMAL-NEXT: movl [[ALLOC]], [[EAX:%e..]]
; NORMAL-NEXT: movl [[EAX]], (%esp) # 4-byte Spill
; NORMAL: nop
; NORMAL: pushl $4
; NORMAL-NEXT: pushl $3
; NORMAL-NEXT: pushl $2
; NORMAL-NEXT: pushl $1
; NORMAL-NEXT: calll *16(%esp)
; NORMAL-NEXT: addl $16, %esp
define void @test10() optsize {
%stack_fptr = alloca void (i32, i32, i32, i32)*
store void (i32, i32, i32, i32)* @good, void (i32, i32, i32, i32)** %stack_fptr
%good_ptr = load volatile void (i32, i32, i32, i32)*, void (i32, i32, i32, i32)** %stack_fptr
call void asm sideeffect "nop", "~{ax},~{bx},~{cx},~{dx},~{bp},~{si},~{di}"()
call void (i32, i32, i32, i32) %good_ptr(i32 1, i32 2, i32 3, i32 4)
ret void
}
; We can't fold the load from the global into the push because of
; interference from the store
; NORMAL-LABEL: test11:
; NORMAL: movl _the_global, [[EAX:%e..]]
; NORMAL-NEXT: movl $42, _the_global
; NORMAL-NEXT: pushl $4
; NORMAL-NEXT: pushl $3
; NORMAL-NEXT: pushl $2
; NORMAL-NEXT: pushl [[EAX]]
; NORMAL-NEXT: call
; NORMAL-NEXT: addl $16, %esp
@the_global = external global i32
define void @test11() optsize {
%myload = load i32, i32* @the_global
store i32 42, i32* @the_global
call void @good(i32 %myload, i32 2, i32 3, i32 4)
ret void
}
; Converting one mov into a push isn't worth it when
; doing so forces too much overhead for other calls.
; NORMAL-LABEL: test12:
; NORMAL: movl $8, 12(%esp)
; NORMAL-NEXT: movl $7, 8(%esp)
; NORMAL-NEXT: movl $6, 4(%esp)
; NORMAL-NEXT: movl $5, (%esp)
; NORMAL-NEXT: calll _good
define void @test12() optsize {
entry:
%s = alloca %struct.s, align 4
call void @struct(%struct.s* %s, i32 2, i32 3, i32 4)
call void @good(i32 5, i32 6, i32 7, i32 8)
call void @struct(%struct.s* %s, i32 10, i32 11, i32 12)
ret void
}
; But if the gains outweigh the overhead, we should do it
; NORMAL-LABEL: test12b:
; NORMAL: pushl $4
; NORMAL-NEXT: pushl $3
; NORMAL-NEXT: pushl $2
; NORMAL-NEXT: pushl $1
; NORMAL-NEXT: calll _good
; NORMAL-NEXT: addl $16, %esp
; NORMAL-NEXT: subl $20, %esp
; NORMAL: movl $8, 16(%esp)
; NORMAL-NEXT: movl $7, 12(%esp)
; NORMAL-NEXT: movl $6, 8(%esp)
; NORMAL-NEXT: calll _struct
; NORMAL-NEXT: addl $20, %esp
; NORMAL-NEXT: pushl $12
; NORMAL-NEXT: pushl $11
; NORMAL-NEXT: pushl $10
; NORMAL-NEXT: pushl $9
; NORMAL-NEXT: calll _good
; NORMAL-NEXT: addl $16, %esp
define void @test12b() optsize {
entry:
%s = alloca %struct.s, align 4
call void @good(i32 1, i32 2, i32 3, i32 4)
call void @struct(%struct.s* %s, i32 6, i32 7, i32 8)
call void @good(i32 9, i32 10, i32 11, i32 12)
ret void
}
; Make sure the add does not prevent folding loads into pushes.
; val1 and val2 will not be folded into pushes since they have
; an additional use, but val3 should be.
; NORMAL-LABEL: test13:
; NORMAL: movl ([[P1:%e..]]), [[V1:%e..]]
; NORMAL-NEXT: movl ([[P2:%e..]]), [[V2:%e..]]
; NORMAL-NEXT: , [[ADD:%e..]]
; NORMAL-NEXT: pushl [[ADD]]
; NORMAL-NEXT: pushl ([[P3:%e..]])
; NORMAL-NEXT: pushl [[V2]]
; NORMAL-NEXT: pushl [[V1]]
; NORMAL-NEXT: calll _good
; NORMAL: movl [[P3]], %eax
define i32* @test13(i32* inreg %ptr1, i32* inreg %ptr2, i32* inreg %ptr3) optsize {
entry:
%val1 = load i32, i32* %ptr1
%val2 = load i32, i32* %ptr2
%val3 = load i32, i32* %ptr3
%add = add i32 %val1, %val2
call void @good(i32 %val1, i32 %val2, i32 %val3, i32 %add)
ret i32* %ptr3
}