llvm-project/llvm/docs/RISCVUsage.rst

=============================
User Guide for RISC-V Target
=============================

.. contents::
   :local:

Introduction
============

The RISC-V target provides code generation for processors implementing
supported variations of the RISC-V specification.  It lives in the
``llvm/lib/Target/RISCV`` directory.

Base ISAs
=========

The specification defines four base instruction sets: RV32I, RV32E, RV64I,
and RV128I. Currently, LLVM fully supports RV32I, and RV64I.  RV32E is
supported by the assembly-based tools only.  RV128I is not supported.

To specify the target triple:

  .. table:: RISC-V Architectures

     ============ ==============================================================
     Architecture Description
     ============ ==============================================================
     ``riscv32``   RISC-V with XLEN=32 (i.e. RV32I or RV32E)
     ``riscv64``   RISC-V with XLEN=64 (i.e. RV64I)
     ============ ==============================================================

To select an E variant ISA (e.g. RV32E instead of RV32I), use the base
architecture string (e.g. ``riscv32``) with the extension ``e``.

.. _riscv-extensions:

Extensions
==========

The following table provides a status summary for extensions which have been
ratified and thus have finalized specifications.  When relevant, detailed notes
on support follow.

  .. table:: Ratified Extensions by Status

     ===============  =========================================================
     Extension        Status
     ===============  =========================================================
     ``A``            Supported
     ``C``            Supported
     ``D``            Supported
     ``F``            Supported
     ``M``            Supported
     ``V``            Supported
     ``Zba``          Supported
     ``Zbb``          Supported
     ``Zbc``          Supported
     ``Zbkb``         Supported (`See note <#riscv-scalar-crypto-note1>`__)
     ``Zbkc``         Supported
     ``Zbkx``         Supported (`See note <#riscv-scalar-crypto-note1>`__)
     ``Zbs``          Supported
     ``Zdinx``        Assembly Support
     ``Zfh``          Supported
     ``Zfhmin``       Supported
     ``Zfinx``        Assembly Support
     ``Zhinx``        Assembly Support
     ``Zhinxmin``     Assembly Support
     ``Zicbom``       Assembly Support
     ``Zicbop``       Assembly Support
     ``Zicboz``       Assembly Support
     ``Zihintpause``  Assembly Support
     ``Zkn``          Supported
     ``Zknd``         Supported (`See note <#riscv-scalar-crypto-note2>`__)
     ``Zkne``         Supported (`See note <#riscv-scalar-crypto-note2>`__)
     ``Zknh``         Supported (`See note <#riscv-scalar-crypto-note2>`__)
     ``Zksed``        Supported (`See note <#riscv-scalar-crypto-note2>`__)
     ``Zksh``         Supported (`See note <#riscv-scalar-crypto-note2>`__)
     ``Zk``           Supported
     ``Zkr``          Supported
     ``Zks``          Supported
     ``Zkt``          Supported
     ``Zmmul``        Supported
     ``Zve32x``       (`Partially <#riscv-vlen-32-note>`__) Supported
     ``Zve32f``       (`Partially <#riscv-vlen-32-note>`__) Supported
     ``Zve64x``       Supported
     ``Zve64f``       Supported
     ``Zve64d``       Supported
     ``Zvl32b``       (`Partially <#riscv-vlen-32-note>`__) Supported
     ``Zvl64b``       Supported
     ``Zvl128b``      Supported
     ``Zvl256b``      Supported
     ``Zvl512b``      Supported
     ``Zvl1024b``     Supported
     ``Zvl2048b``     Supported
     ``Zvl4096b``     Supported
     ``Zvl8192b``     Supported
     ``Zvl16384b``    Supported
     ``Zvl32768b``    Supported
     ``Zvl65536b``    Supported
     ===============  =========================================================

Assembly Support
  LLVM supports the associated instructions in assembly.  All assembly related tools (e.g. assembler, disassembler, llvm-objdump, etc..) are supported.  Compiler and linker will accept extension names, and linked binaries will contain appropriate ELF flags and attributes to reflect use of named extension.

Supported
  Fully supported by the compiler.  This includes everything in Assembly Support, along with - if relevant - C language intrinsics for the instructions and pattern matching by the compiler to recognize idiomatic patterns which can be lowered to the associated instructions.

.. _riscv-scalar-crypto-note1:

``Zbkb``, ``Zbkx``
  Pattern matching support for these instructions is incomplete.

.. _riscv-scalar-crypto-note2:

``Zknd``, ``Zkne``, ``Zknh``, ``Zksed``, ``Zksh``
  No pattern matching exists.  As a result, these instructions can only be used from assembler or via intrinsic calls.

.. _riscv-vlen-32-note:

``Zve32x``, ``Zve32f``, ``Zvl32b``
  LLVM currently assumes a minimum VLEN (vector register width) of 64 bits during compilation, and as a result ``Zve32x`` and ``Zve32f`` are supported only for VLEN>=64.  Assembly support doesn't have this restriction.

Experimental Extensions
=======================

LLVM supports (to various degrees) a number of experimental extensions.  All experimental extensions have ``experimental-`` as a prefix.  There is explicitly no compatibility promised between versions of the toolchain, and regular users are strongly advised *not* to make use of experimental extensions before they reach ratification.

The primary goal of experimental support is to assist in the process of ratification by providing an existence proof of an implementation, and simplifying efforts to validate the value of a proposed extension against large code bases.  Experimental extensions are expected to either transition to ratified status, or be eventually removed.  The decision on whether to accept an experimental extension is currently done on an entirely case by case basis; if you want to propose one, attending the bi-weekly RISC-V sync-up call is strongly advised.

``experimental-zawrs``
  LLVM implements the `1.0-rc3 draft specification <https://github.com/riscv/riscv-zawrs/releases/download/V1.0-rc3/Zawrs.pdf>`_.  Note that have been backwards incompatible changes made between release candidates for the 1.0 draft.

``experimental-zca``
  LLVM implements the `0.70 draft specification <https://github.com/riscv/riscv-code-size-reduction/releases/tag/V0.70.1-TOOLCHAIN-DEV>`_.

``experimental-zihintntl``
  LLVM implements the `0.2 draft specification <https://github.com/riscv/riscv-isa-manual/releases/tag/draft-20220831-bf5a151>`_.

``experimental-ztso``
  LLVM implements the `v0.1 proposed specification <https://github.com/riscv/riscv-isa-manual/releases/download/draft-20220723-10eea63/riscv-spec.pdf>`_ (see Chapter 25).  Using will set appropriate ELF flags and attributes, but does not yet change code generation.

``experimental-zvfh``
  LLVM implements `this draft text <https://github.com/riscv/riscv-v-spec/pull/780>`_.

To use an experimental extension from `clang`, you must add `-menable-experimental-extensions` to the command line, and specify the exact version of the experimental extension you are using.  To use an experimental extension with LLVM's internal developer tools (e.g. `llc`, `llvm-objdump`, `llvm-mc`), you must prefix the extension name with `experimental-`.  Note that you don't need to specify the version with internal tools, and shouldn't include the `experimental-` prefix with `clang`.

Specification Documents
=======================
For ratified specifications, please refer to the `official RISC-V International
page <https://riscv.org/technical/specifications/>`_.  Make sure to check the
`wiki for not yet integrated extensions
<https://wiki.riscv.org/display/HOME/Recently+Ratified+Extensions>`_.