llvm-project/compiler-rt/lib/xray/xray_x86_64.cc

#include "sanitizer_common/sanitizer_common.h"
#include "xray_defs.h"
#include "xray_interface_internal.h"
#include <atomic>
#include <cstdint>
#include <errno.h>
#include <fcntl.h>
#include <iterator>
#include <limits>
#include <tuple>
#include <unistd.h>

namespace __xray {

static std::pair<ssize_t, bool>
retryingReadSome(int Fd, char *Begin, char *End) XRAY_NEVER_INSTRUMENT {
  auto BytesToRead = std::distance(Begin, End);
  ssize_t BytesRead;
  ssize_t TotalBytesRead = 0;
  while (BytesToRead && (BytesRead = read(Fd, Begin, BytesToRead))) {
    if (BytesRead == -1) {
      if (errno == EINTR)
        continue;
      Report("Read error; errno = %d\n", errno);
      return std::make_pair(TotalBytesRead, false);
    }

    TotalBytesRead += BytesRead;
    BytesToRead -= BytesRead;
    Begin += BytesRead;
  }
  return std::make_pair(TotalBytesRead, true);
}

static bool readValueFromFile(const char *Filename,
                              long long *Value) XRAY_NEVER_INSTRUMENT {
  int Fd = open(Filename, O_RDONLY | O_CLOEXEC);
  if (Fd == -1)
    return false;
  static constexpr size_t BufSize = 256;
  char Line[BufSize] = {};
  ssize_t BytesRead;
  bool Success;
  std::tie(BytesRead, Success) = retryingReadSome(Fd, Line, Line + BufSize);
  if (!Success)
    return false;
  close(Fd);
  char *End = nullptr;
  long long Tmp = internal_simple_strtoll(Line, &End, 10);
  bool Result = false;
  if (Line[0] != '\0' && (*End == '\n' || *End == '\0')) {
    *Value = Tmp;
    Result = true;
  }
  return Result;
}

uint64_t cycleFrequency() XRAY_NEVER_INSTRUMENT {
  long long CPUFrequency = -1;
  if (readValueFromFile("/sys/devices/system/cpu/cpu0/tsc_freq_khz",
                        &CPUFrequency)) {
    CPUFrequency *= 1000;
  } else if (readValueFromFile(
      "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq",
      &CPUFrequency)) {
    CPUFrequency *= 1000;
  } else {
    Report("Unable to determine CPU frequency for TSC accounting.\n");
  }
  return CPUFrequency == -1 ? 0 : static_cast<uint64_t>(CPUFrequency);
}

static constexpr uint8_t CallOpCode = 0xe8;
static constexpr uint16_t MovR10Seq = 0xba41;
static constexpr uint16_t Jmp9Seq = 0x09eb;
static constexpr uint8_t JmpOpCode = 0xe9;
static constexpr uint8_t RetOpCode = 0xc3;

static constexpr int64_t MinOffset{std::numeric_limits<int32_t>::min()};
static constexpr int64_t MaxOffset{std::numeric_limits<int32_t>::max()};

bool patchFunctionEntry(const bool Enable, const uint32_t FuncId,
                        const XRaySledEntry &Sled) XRAY_NEVER_INSTRUMENT {
  // Here we do the dance of replacing the following sled:
  //
  // xray_sled_n:
  //   jmp +9
  //   <9 byte nop>
  //
  // With the following:
  //
  //   mov r10d, <function id>
  //   call <relative 32bit offset to entry trampoline>
  //
  // We need to do this in the following order:
  //
  // 1. Put the function id first, 2 bytes from the start of the sled (just
  // after the 2-byte jmp instruction).
  // 2. Put the call opcode 6 bytes from the start of the sled.
  // 3. Put the relative offset 7 bytes from the start of the sled.
  // 4. Do an atomic write over the jmp instruction for the "mov r10d"
  // opcode and first operand.
  //
  // Prerequisite is to compute the relative offset to the
  // __xray_FunctionEntry function's address.
  int64_t TrampolineOffset = reinterpret_cast<int64_t>(__xray_FunctionEntry) -
                             (static_cast<int64_t>(Sled.Address) + 11);
  if (TrampolineOffset < MinOffset || TrampolineOffset > MaxOffset) {
    Report("XRay Entry trampoline (%p) too far from sled (%p)\n",
           __xray_FunctionEntry, reinterpret_cast<void *>(Sled.Address));
    return false;
  }
  if (Enable) {
    *reinterpret_cast<uint32_t *>(Sled.Address + 2) = FuncId;
    *reinterpret_cast<uint8_t *>(Sled.Address + 6) = CallOpCode;
    *reinterpret_cast<uint32_t *>(Sled.Address + 7) = TrampolineOffset;
    std::atomic_store_explicit(
        reinterpret_cast<std::atomic<uint16_t> *>(Sled.Address), MovR10Seq,
        std::memory_order_release);
  } else {
    std::atomic_store_explicit(
        reinterpret_cast<std::atomic<uint16_t> *>(Sled.Address), Jmp9Seq,
        std::memory_order_release);
    // FIXME: Write out the nops still?
  }
  return true;
}

bool patchFunctionExit(const bool Enable, const uint32_t FuncId,
                       const XRaySledEntry &Sled) XRAY_NEVER_INSTRUMENT {
  // Here we do the dance of replacing the following sled:
  //
  // xray_sled_n:
  //   ret
  //   <10 byte nop>
  //
  // With the following:
  //
  //   mov r10d, <function id>
  //   jmp <relative 32bit offset to exit trampoline>
  //
  // 1. Put the function id first, 2 bytes from the start of the sled (just
  // after the 1-byte ret instruction).
  // 2. Put the jmp opcode 6 bytes from the start of the sled.
  // 3. Put the relative offset 7 bytes from the start of the sled.
  // 4. Do an atomic write over the jmp instruction for the "mov r10d"
  // opcode and first operand.
  //
  // Prerequisite is to compute the relative offset fo the
  // __xray_FunctionExit function's address.
  int64_t TrampolineOffset = reinterpret_cast<int64_t>(__xray_FunctionExit) -
                             (static_cast<int64_t>(Sled.Address) + 11);
  if (TrampolineOffset < MinOffset || TrampolineOffset > MaxOffset) {
    Report("XRay Exit trampoline (%p) too far from sled (%p)\n",
           __xray_FunctionExit, reinterpret_cast<void *>(Sled.Address));
    return false;
  }
  if (Enable) {
    *reinterpret_cast<uint32_t *>(Sled.Address + 2) = FuncId;
    *reinterpret_cast<uint8_t *>(Sled.Address + 6) = JmpOpCode;
    *reinterpret_cast<uint32_t *>(Sled.Address + 7) = TrampolineOffset;
    std::atomic_store_explicit(
        reinterpret_cast<std::atomic<uint16_t> *>(Sled.Address), MovR10Seq,
        std::memory_order_release);
  } else {
    std::atomic_store_explicit(
        reinterpret_cast<std::atomic<uint8_t> *>(Sled.Address), RetOpCode,
        std::memory_order_release);
    // FIXME: Write out the nops still?
  }
  return true;
}

bool patchFunctionTailExit(const bool Enable, const uint32_t FuncId,
                           const XRaySledEntry &Sled) XRAY_NEVER_INSTRUMENT {
  // Here we do the dance of replacing the tail call sled with a similar
  // sequence as the entry sled, but calls the tail exit sled instead.
  int64_t TrampolineOffset =
      reinterpret_cast<int64_t>(__xray_FunctionTailExit) -
      (static_cast<int64_t>(Sled.Address) + 11);
  if (TrampolineOffset < MinOffset || TrampolineOffset > MaxOffset) {
    Report("XRay Exit trampoline (%p) too far from sled (%p)\n",
           __xray_FunctionExit, reinterpret_cast<void *>(Sled.Address));
    return false;
  }
  if (Enable) {
    *reinterpret_cast<uint32_t *>(Sled.Address + 2) = FuncId;
    *reinterpret_cast<uint8_t *>(Sled.Address + 6) = CallOpCode;
    *reinterpret_cast<uint32_t *>(Sled.Address + 7) = TrampolineOffset;
    std::atomic_store_explicit(
        reinterpret_cast<std::atomic<uint16_t> *>(Sled.Address), MovR10Seq,
        std::memory_order_release);
  } else {
    std::atomic_store_explicit(
        reinterpret_cast<std::atomic<uint16_t> *>(Sled.Address), Jmp9Seq,
        std::memory_order_release);
    // FIXME: Write out the nops still?
  }
  return true;
}

} // namespace __xray