Reed Kotler 32be74b178 Add mips32 r1 to the list of supported targets for Mips fast-isel ... Summary: Expand list of supported targets for Mips to include mips32 r1. Previously it only include r2. More patches are coming where there is a difference but in the current patches as pushed upstream, r1 and r2 are equivalent. Test Plan: simplestorefp1.ll add new build bots at mips to test this flavor at both -O0 and -O2 Reviewers: dsanders Reviewed By: dsanders Differential Revision: http://reviews.llvm.org/D5306 llvm-svn: 217821		2014-09-15 20:30:25 +00:00
..
Fast-ISel	Add mips32 r1 to the list of supported targets for Mips fast-isel	2014-09-15 20:30:25 +00:00
cconv	[mips] Improve robustness of some tests.	2014-08-14 13:10:48 +00:00
llvm-ir	[mips][mips64r6] Use JALR for indirect branches instead of JR (which is not available on MIPS32r6/MIPS64r6)	2014-07-09 10:21:59 +00:00
mips32r6	[mips][mips64r6] Add experimental support for MIPS32r6 and MIPS64r6	2014-05-09 09:46:21 +00:00
mips64r6	[mips][mips64r6] Add experimental support for MIPS32r6 and MIPS64r6	2014-05-09 09:46:21 +00:00
msa	Fix fmul combines with constant splat vectors	2014-08-16 10:14:19 +00:00
2008-06-05-Carry.ll	…
2008-07-03-SRet.ll	…
2008-07-06-fadd64.ll	…
2008-07-07-FPExtend.ll	…
2008-07-07-Float2Int.ll	…
2008-07-07-IntDoubleConvertions.ll	…
2008-07-15-InternalConstant.ll	…
2008-07-15-SmallSection.ll	…
2008-07-16-SignExtInReg.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
2008-07-22-Cstpool.ll	…
2008-07-23-fpcmp.ll	Fix the remaining TCL-style quotes found in the testsuite. This is	2012-07-02 19:09:46 +00:00
2008-07-29-icmp.ll	Fix the remaining TCL-style quotes found in the testsuite. This is	2012-07-02 19:09:46 +00:00
2008-07-31-fcopysign.ll	…
2008-08-01-AsmInline.ll	[mips][mips64r6] Improve tests affected by the changes to multiplies and divides	2014-06-11 15:48:00 +00:00
2008-08-03-ReturnDouble.ll	…
2008-08-03-fabs64.ll	…
2008-08-04-Bitconvert.ll	…
2008-08-06-Alloca.ll	…
2008-08-07-CC.ll	…
2008-08-07-FPRound.ll	…
2008-08-08-bswap.ll	…
2008-08-08-ctlz.ll	Manually upgrade the test suite to specify the flag to cttz and ctlz.	2011-12-12 11:59:10 +00:00
2008-10-13-LegalizerBug.ll	…
2008-11-10-xint_to_fp.ll	Remove the no longer existent psp triple from a test.	2012-03-08 21:22:27 +00:00
2009-11-16-CstPoolLoad.ll	[mips] Make it impossible to have UnknownABI in CodeGen and Integrated Assembler.	2014-02-20 14:58:19 +00:00
2010-07-20-Switch.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
2010-11-09-CountLeading.ll	Manually upgrade the test suite to specify the flag to cttz and ctlz.	2011-12-12 11:59:10 +00:00
2010-11-09-Mul.ll	…
2011-05-26-BranchKillsVreg.ll	…
2012-12-12-ExpandMemcpy.ll	Fix a logic bug in inline expansion of memcpy / memset with an overlapping	2012-12-12 20:43:23 +00:00
2013-11-18-fp64-const0.ll	[mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64	2014-06-12 11:55:58 +00:00
DbgValueOtherTargets.test	Remove unnecessary leading comment characters in lit-only file	2013-03-18 22:08:16 +00:00
abicalls.ll	[mips] Invert the abicalls feature bit to be noabicalls so that it's possible for -mno-abicalls to take effect.	2014-08-08 15:47:17 +00:00
abiflags-xx.ll	[mips] Expand BuildPairF64 to a spill and reload when the O32 FPXX ABI is	2014-07-14 09:40:29 +00:00
abiflags32.ll	[mips] Do not emit '.module fp=...' unless we really need to.	2014-07-21 15:25:24 +00:00
addc.ll	…
addi.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
addressing-mode.ll	Initial implementation of MipsTargetLowering::isLegalAddressingMode.	2012-11-17 00:25:41 +00:00
align16.ll	Last change for mips16 prolog/epilog cleanup and optimization.	2013-12-15 20:49:30 +00:00
alloca.ll	TBAA: remove !tbaa from testing cases if not used.	2013-04-30 17:52:57 +00:00
alloca16.ll	Last change for mips16 prolog/epilog cleanup and optimization.	2013-12-15 20:49:30 +00:00
analyzebranch.ll	[mips][mips64r6] Correct cond names in the cmp.cond.[ds] instructions	2014-07-09 10:40:20 +00:00
and1.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
asm-large-immediate.ll	The inline asm operand modifier 'n' is suppose	2012-06-21 21:37:54 +00:00
atomic.ll	Replace the result usages while legalizing cmpxchg.	2014-07-21 17:33:44 +00:00
atomicops.ll	IR: add "cmpxchg weak" variant to support permitted failure.	2014-06-13 14:24:07 +00:00
beqzc.ll	Make all the conditional Mips 16 branches get initially set for the	2013-11-15 02:21:52 +00:00
beqzc1.ll	Make all the conditional Mips 16 branches get initially set for the	2013-11-15 02:21:52 +00:00
biggot.ll	Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.	2013-07-14 06:24:09 +00:00
blez_bgez.ll	[mips] Make mips64 the default CPU for the mips64 architecture	2014-02-20 13:13:33 +00:00
blockaddr.ll	[mips] Make it impossible to have UnknownABI in CodeGen and Integrated Assembler.	2014-02-20 14:58:19 +00:00
br-jmp.ll	Expand pseudos/macros for Selt. This is the last of the complex	2013-02-23 03:09:56 +00:00
brconeq.ll	Add conditional branch instructions and their patterns.	2012-10-17 22:29:54 +00:00
brconeqk.ll	Add conditional branch instructions and their patterns.	2012-10-17 22:29:54 +00:00
brconeqz.ll	Add conditional branch instructions and their patterns.	2012-10-17 22:29:54 +00:00
brconge.ll	Add conditional branch instructions and their patterns.	2012-10-17 22:29:54 +00:00
brcongt.ll	Add conditional branch instructions and their patterns.	2012-10-17 22:29:54 +00:00
brconle.ll	Add conditional branch instructions and their patterns.	2012-10-17 22:29:54 +00:00
brconlt.ll	Add conditional branch instructions and their patterns.	2012-10-17 22:29:54 +00:00
brconne.ll	Add conditional branch instructions and their patterns.	2012-10-17 22:29:54 +00:00
brconnek.ll	Add conditional branch instructions and their patterns.	2012-10-17 22:29:54 +00:00
brconnez.ll	Add conditional branch instructions and their patterns.	2012-10-17 22:29:54 +00:00
brdelayslot.ll	[mips] Make sure loads from lazy-binding entries do not get CSE'd or hoisted out	2013-09-28 00:12:32 +00:00
brind.ll	Implement brind operator for mips16.	2012-10-28 23:08:07 +00:00
brsize3.ll	Take care of long short branch immediate instructions for mips16 in	2013-11-13 23:52:18 +00:00
brsize3a.ll	Take care of long short branch immediate instructions for mips16 in	2013-11-13 23:52:18 +00:00
bswap.ll	[mips] Check emitted code for llvm.bswap.i32 on MIPS16/MIPS64 and llvm.bswap.i64 on MIPS16.	2014-03-31 11:00:04 +00:00
buildpairextractelementf64.ll	[mips] Use MFHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64 moves	2014-07-14 12:41:31 +00:00
cache-intrinsic.ll	Add @llvm.clear_cache builtin	2014-03-26 12:52:28 +00:00
call-optimization.ll	[mips] Fix test case.	2013-12-07 02:48:29 +00:00
cfi_offset.ll	[mips] Emit two CFI offset directives per double precision SDC1/LDC1	2014-07-10 22:23:30 +00:00
check-noat.ll	Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.	2013-07-14 06:24:09 +00:00
ci2.ll	Fix a funny bug I introduced during conversion of ARM constant islands to Mips.	2013-11-24 02:53:09 +00:00
cmov.ll	[SDAG] Introduce a combined set to the DAG combiner which tracks nodes	2014-07-24 22:15:28 +00:00
cmplarge.ll	TBAA: remove !tbaa from testing cases when they are not needed.	2013-09-30 18:17:35 +00:00
const-mult.ll	[mips] Make mips64 the default CPU for the mips64 architecture	2014-02-20 13:13:33 +00:00
const1.ll	Make first substantial checkin of my port of ARM constant islands code to Mips.	2013-10-27 21:57:36 +00:00
const4a.ll	Fix broken CHECK lines.	2014-01-11 21:06:00 +00:00
const6.ll	Update older test cases for latest patch.	2013-11-24 03:37:56 +00:00
const6a.ll	Adjust offsets for max load instruction offsets. This is more pessimistic	2014-01-16 00:47:46 +00:00
constantfp0.ll	…
countleading.ll	[mips][mips64r6] Correct select patterns that have the condition or true/false values backwards	2014-07-09 10:47:26 +00:00
cprestore.ll	Fix test cases.	2012-05-12 03:25:16 +00:00
ctlz-v.ll	Add support for scalarizing ctlz_zero_undef	2014-07-30 00:44:03 +00:00
ctlz.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
cttz-v.ll	Add support for scalarizing cttz_zero_undef	2014-08-10 22:49:54 +00:00
disable-tail-merge.ll	[mips] Test case for r192124.	2013-10-07 21:32:57 +00:00
div.ll	Div, Rem int/unsigned int	2012-10-12 02:01:09 +00:00
div_rem.ll	Div, Rem int/unsigned int	2012-10-12 02:01:09 +00:00
divrem.ll	[mips][mips64r6] Replace m[tf]hi, m[tf]lo, mult, multu, dmult, dmultu, div, ddiv, divu, ddivu for MIPS32r6/MIPS64.	2014-06-12 10:44:10 +00:00
divu.ll	Div, Rem int/unsigned int	2012-10-12 02:01:09 +00:00
divu_remu.ll	Div, Rem int/unsigned int	2012-10-12 02:01:09 +00:00
double2int.ll	…
dsp-patterns-cmp-vselect.ll	Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.	2013-07-14 06:24:09 +00:00
dsp-patterns.ll	Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.	2013-07-14 06:24:09 +00:00
dsp-r1.ll	[mips][mips64r6] madd/maddu/msub/msubu are not available on MIPS32r6/MIPS64r6	2014-06-12 10:54:16 +00:00
dsp-r2.ll	MIPS DSP: add operands to make sure instruction strings are being matched.	2012-09-28 21:23:16 +00:00
dsp-vec-load-store.ll	[mips] Expand vector truncating stores and extending loads.	2013-08-02 19:23:33 +00:00
eh-dwarf-cfa.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
eh-return32.ll	[mips][mips64r6] Use JALR for returns instead of JR (which is not available on MIPS32r6/MIPS64r6)	2014-07-09 10:16:07 +00:00
eh-return64.ll	[mips][mips64r6] Use JALR for returns instead of JR (which is not available on MIPS32r6/MIPS64r6)	2014-07-09 10:16:07 +00:00
eh.ll	TBAA: remove !tbaa from testing cases if not used.	2013-04-30 17:52:57 +00:00
ehframe-indirect.ll	Fix MIPS exception personality encoding.	2014-05-30 16:48:56 +00:00
elf_eflags.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
emit-big-cst.ll	Teach AsmPrinter how to print odd constants.	2013-06-07 18:36:03 +00:00
ex2.ll	Last change for mips16 prolog/epilog cleanup and optimization.	2013-12-15 20:49:30 +00:00
extins.ll	[mips] Do not generate INS/EXT nodes if target does not have support for	2013-10-09 23:36:17 +00:00
f16abs.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
fabs.ll	Re-commit: [mips] abs.[ds], and neg.[ds] should be allowed regardless of -enable-no-nans-fp-math	2014-04-09 09:56:43 +00:00
fastcc.ll	[mips] Don't use odd-numbered float registers for double arguments for fastcc	2014-08-22 09:23:22 +00:00
fcmp.ll	Make it possible for ints/floats to return different values from getBooleanContents()	2014-07-10 10:18:12 +00:00
fcopysign-f32-f64.ll	[mips] Fix fcopysign for MIPS-IV and add the test.	2014-04-14 16:24:12 +00:00
fcopysign.ll	[mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64	2014-06-12 11:55:58 +00:00
fixdfsf.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
fmadd1.ll	[mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64	2014-06-12 11:55:58 +00:00
fneg.ll	Re-commit: [mips] abs.[ds], and neg.[ds] should be allowed regardless of -enable-no-nans-fp-math	2014-04-09 09:56:43 +00:00
fp-indexed-ls.ll	[mips][mips64r6] [sl][duw]xc1 are not available on MIPS32r6/MIPS64r6	2014-06-12 14:19:28 +00:00
fp-spill-reload.ll	Make register FP allocatable if the compiled function does not have dynamic	2012-05-09 01:38:13 +00:00
fp16instrinsmc.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
fp16mix.ll	Last change for mips16 prolog/epilog cleanup and optimization.	2013-12-15 20:49:30 +00:00
fp16static.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
fp64a.ll	[mips] For the FP64A ABI, odd-numbered double-precision moves must not use mtc1/mfc1.	2014-07-14 13:08:14 +00:00
fpbr.ll	[mips][mips64r6] bc1[tf] are not available on MIPS32r6/MIPS64r6	2014-06-12 15:00:17 +00:00
fpneeded.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
fpnotneeded.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
fptr2.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
fpxx.ll	[mips] For the FP64A ABI, odd-numbered double-precision moves must not use mtc1/mfc1.	2014-07-14 13:08:14 +00:00
frame-address.ll	Add more addFrameMove test coverage.	2013-05-16 14:51:26 +00:00
frem.ll	Expand FREM.	2012-03-29 18:43:11 +00:00
global-address.ll	[mips] Make it impossible to have UnknownABI in CodeGen and Integrated Assembler.	2014-02-20 14:58:19 +00:00
global-pointer-reg.ll	Make the following changes in MipsAsmPrinter.cpp:	2012-05-12 00:48:43 +00:00
gpreg-lazy-binding.ll	[mips] Print move instructions.	2013-03-04 22:25:01 +00:00
gprestore.ll	Fix test cases.	2012-05-12 03:25:16 +00:00
helloworld.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
hf1_body.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
hf16_1.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
hf16call32.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
hf16call32_body.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
hfptrcall.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
i32k.ll	Check in conditional branches for constant islands. Still need to finish	2013-11-28 00:56:37 +00:00
i64arg.ll	[mips] Make sure there is a chain edge dependency between loads that read	2013-11-09 02:38:51 +00:00
imm.ll	Add a test case for r146900.	2011-12-19 20:24:28 +00:00
indirectcall.ll	jalr should use t9 ($25) for indirect calls regardless of the relocation model	2011-12-09 01:45:12 +00:00
init-array.ll	Replace -use-init-array with -use-ctors.	2014-09-02 13:54:53 +00:00
inlineasm-cnstrnt-bad-I-1.ll	[mips] Use addiu in inline assembly tests since addi is not available in all ISA's	2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-J.ll	[mips] Use addiu in inline assembly tests since addi is not available in all ISA's	2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-K.ll	Add support for the inline asm constraint 'K'.	2012-05-07 05:46:29 +00:00
inlineasm-cnstrnt-bad-L.ll	[mips] Use addiu in inline assembly tests since addi is not available in all ISA's	2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-N.ll	[mips] Use addiu in inline assembly tests since addi is not available in all ISA's	2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-O.ll	[mips] Use addiu in inline assembly tests since addi is not available in all ISA's	2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-P.ll	[mips] Use addiu in inline assembly tests since addi is not available in all ISA's	2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-reg.ll	[mips][mips64r6] Improve tests affected by the changes to multiplies and divides	2014-06-11 15:48:00 +00:00
inlineasm-cnstrnt-reg64.ll	[mips] Use addiu in inline assembly tests since addi is not available in all ISA's	2014-05-22 11:46:58 +00:00
inlineasm-operand-code.ll	[mips] Use addiu in inline assembly tests since addi is not available in all ISA's	2014-05-22 11:46:58 +00:00
inlineasm64.ll	Have getRegForInlineAsmConstraint return the correct register class when target	2012-01-04 02:45:01 +00:00
inlineasm_constraint.ll	[mips] Change lwl and lwr in inlineasm_constraint.ll to lw	2014-05-22 11:51:06 +00:00
inlineasmmemop.ll	Mips specific inline asm memory operand modifier test case	2013-04-11 19:39:19 +00:00
int-to-float-conversion.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
internalfunc.ll	Fix test cases.	2012-05-12 03:25:16 +00:00
jtstat.ll	Test case hygiene.	2013-03-09 18:25:40 +00:00
l3mc.ll	This patch has two main functions:	2014-02-14 19:16:39 +00:00
largeimm1.ll	[mips] Use register number instead of name to print register $AT.	2012-11-02 21:26:03 +00:00
largeimmprinting.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
lazy-binding.ll	[mips] Make sure loads from lazy-binding entries do not get CSE'd or hoisted out	2013-09-28 00:12:32 +00:00
lb1.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
lbu1.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
lcb2.ll	Check in conditional branches for constant islands. Still need to finish	2013-11-28 00:56:37 +00:00
lcb3c.ll	Part 1 of 3 patches that completes very long conditional branches	2013-11-29 22:32:56 +00:00
lcb4a.ll	final patch for very long conditional branches for mips16 constant islands.	2013-12-03 23:42:51 +00:00
lcb5.ll	final patch for very long conditional branches for mips16 constant islands.	2013-12-03 23:42:51 +00:00
lh1.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
lhu1.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
lit.local.cfg	Reduce verbiage of lit.local.cfg files	2014-06-09 22:42:55 +00:00
llcarry.ll	Implement carry for subtract/add for mips16	2012-10-26 04:46:26 +00:00
load-store-left-right.ll	[mips][mips64r6] [ls][dw][lr] are not available in MIPS32r6/MIPS64r6	2014-05-23 13:18:02 +00:00
longbranch.ll	[mips] Modify long branch for NaCl:	2014-06-05 13:52:08 +00:00
machineverifier.ll	Make machine verifier check the first instruction of the last bundle instead of	2012-06-14 20:51:13 +00:00
madd-msub.ll	[mips][mips64r6] madd/maddu/msub/msubu are not available on MIPS32r6/MIPS64r6	2014-06-12 10:54:16 +00:00
mature-mc-support.ll	Re-commit: Demote EmitRawText call in AsmPrinter::EmitInlineAsm() and remove hasRawTextSupport() call	2014-02-13 14:44:26 +00:00
mbrsize4a.ll	Add, to constant islands, long jumps similar to ARM far branch.	2013-11-21 05:13:23 +00:00
memcpy.ll	Set a higher value for maxStoresPerMemcpy in MipsISelLowering.cpp.	2012-06-13 19:33:32 +00:00
micromips-atomic.ll	Fixed operand of SC microMIPS instruction.	2014-02-28 18:22:56 +00:00
micromips-directives.ll	[mips] Emit '.set nomicromips' before a function's entry label	2014-04-16 11:46:59 +00:00
micromips-jal.ll	Fixed issue with microMIPS JAL instruction.	2014-03-31 14:00:10 +00:00
micromips-load-effective-address.ll	Test case micromips-load-effective-address.s renamed to micromips-load-effective-address.ll and moved to test/CodeGen/Mips.	2014-01-14 16:26:47 +00:00
mips16-hf-attr.ll	[Mips] Does not take in account 'use-soft-float' attribute's value when	2013-12-25 17:00:27 +00:00
mips16_32_1.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_32_3.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_32_4.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_32_5.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_32_6.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_32_7.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_32_8.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_32_9.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_32_10.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_fpret.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
mips16ex.ll	Print a=b as an assignment.	2014-06-24 22:45:16 +00:00
mips16fpe.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
mips64-f128-call.ll	[mips] Add a line which checks function name. Rename file.	2013-03-06 01:58:03 +00:00
mips64-f128.ll	[mips][mips64r6] Correct select patterns that have the condition or true/false values backwards	2014-07-09 10:47:26 +00:00
mips64-libcall.ll	Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.	2013-07-14 06:24:09 +00:00
mips64-sret.ll	Allow sret on the second parameter as well as the first	2014-05-09 22:32:13 +00:00
mips64directive.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
mips64ext.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
mips64extins.ll	Add definitions of 64-bit extract and insert instrucions and make	2011-12-05 21:26:34 +00:00
mips64fpimm0.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
mips64fpldst.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
mips64imm.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
mips64instrs.ll	[mips][mips64r6] cl[oz], and dcl[oz] are re-encoded in MIPS32r6/MIPS64r6	2014-06-16 13:18:59 +00:00
mips64intldst.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
mips64lea.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
mips64muldiv.ll	[mips][mips64r6] Replace m[tf]hi, m[tf]lo, mult, multu, dmult, dmultu, div, ddiv, divu, ddivu for MIPS32r6/MIPS64.	2014-06-12 10:44:10 +00:00
mips64shift.ll	Remove definitions of double word shift plus 32 instructions. Assembler or	2011-12-19 19:44:09 +00:00
mipslopat.ll	…
misha.ll	Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.	2013-07-14 06:24:09 +00:00
mno-ldc1-sdc1.ll	[mips] Use MFHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64 moves	2014-07-14 12:41:31 +00:00
mul.ll	Patch for integer multiply, signed/unsigned, long/long long.	2012-10-05 18:27:54 +00:00
mulll.ll	Patch for integer multiply, signed/unsigned, long/long long.	2012-10-05 18:27:54 +00:00
mulull.ll	Patch for integer multiply, signed/unsigned, long/long long.	2012-10-05 18:27:54 +00:00
nacl-align.ll	Moved test file from test/MC/Mips to test/CodeGen/Mips.	2014-03-07 22:08:46 +00:00
nacl-branch-delay.ll	[mips] Implement NaCl sandboxing of loads, stores and SP changes:	2014-03-10 20:34:23 +00:00
nacl-reserved-regs.ll	[mips] Forbid the use of registers t6, t7 and t8 if the target is NaCl.	2014-02-07 17:16:40 +00:00
neg1.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
no-odd-spreg.ll	[mips] Do not emit '.module [no]oddspreg' unless we really need to.	2014-07-21 10:45:47 +00:00
nomips16.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
not1.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
null-streamer.ll	[Mips] Add a target streamer when creating a null streamer.	2014-06-23 19:43:40 +00:00
null.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
o32_cc.ll	[mips] Use MFHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64 moves	2014-07-14 12:41:31 +00:00
o32_cc_byval.ll	[mips] Set instruction itineraries of loads, stores and conditional moves.	2013-09-06 23:28:24 +00:00
o32_cc_vararg.ll	Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.	2013-07-14 06:24:09 +00:00
octeon.ll	[mips] Add more Octeon cnMips instructions	2014-04-02 18:40:43 +00:00
octeon_popcnt.ll	[mips] Improve robustness of some tests.	2014-08-14 13:10:48 +00:00
optimize-fp-math.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
optimize-pic-o0.ll	Fix regression with -O0 for mips .	2014-03-10 16:31:25 +00:00
or1.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
powif64_16.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
prevent-hoisting.ll	Prevent hoisting the instruction whose def might be clobbered by the terminator.	2014-06-05 13:42:48 +00:00
private.ll	Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.	2013-07-14 06:24:09 +00:00
ra-allocatable.ll	TBAA: remove !tbaa from testing cases when they are not needed.	2013-08-21 22:20:53 +00:00
rdhwr-directives.ll	test case for r159770.	2012-07-05 19:29:31 +00:00
rem.ll	Div, Rem int/unsigned int	2012-10-12 02:01:09 +00:00
remat-immed-load.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
remu.ll	Div, Rem int/unsigned int	2012-10-12 02:01:09 +00:00
return-vector.ll	Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.	2013-07-14 06:24:09 +00:00
return_address.ll	[mips] Print move instructions.	2013-03-04 22:25:01 +00:00
rotate.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
s2rem.ll	Last change for mips16 prolog/epilog cleanup and optimization.	2013-12-15 20:49:30 +00:00
sb1.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
sel1c.ll	[mips] Small code generation improvement for conditional operator (select)	2013-12-05 12:07:05 +00:00
sel2c.ll	[mips] Small code generation improvement for conditional operator (select)	2013-12-05 12:07:05 +00:00
selTBteqzCmpi.ll	Expand mips16 SelT form pseudso/macros.	2013-02-22 05:10:51 +00:00
selTBtnezCmpi.ll	Expand mips16 SelT form pseudso/macros.	2013-02-22 05:10:51 +00:00
selTBtnezSlti.ll	Expand mips16 SelT form pseudso/macros.	2013-02-22 05:10:51 +00:00
select.ll	Make it possible for ints/floats to return different values from getBooleanContents()	2014-07-10 10:18:12 +00:00
selectcc.ll	[mips][mips64r6] c.cond.fmt, mov[fntz], and mov[fntz].[ds] are not available on MIPS32r6/MIPS64r6	2014-06-12 13:39:06 +00:00
seleq.ll	Beginning of expanding all current mips16 macro/pseudo instruction sequences.	2013-02-18 00:59:04 +00:00
seleqk.ll	Expand pseudos BteqzT8CmpiX16 and BtnezT8CmpiX16.	2013-02-19 00:20:58 +00:00
selgek.ll	Expand mips16 SelT form pseudso/macros.	2013-02-22 05:10:51 +00:00
selgt.ll	Expand pseudo/macro BteqzT8SltX16.	2013-02-18 04:04:26 +00:00
selle.ll	Expand macro/pseudo instructions BtnezT8SltX16 and BtnezT8SltuX16.	2013-02-18 05:43:03 +00:00
selltk.ll	Expand mips16 SelT form pseudso/macros.	2013-02-22 05:10:51 +00:00
selne.ll	Expand mips16 SelT form pseudso/macros.	2013-02-22 05:10:51 +00:00
selnek.ll	Convert CodeGen/*/*.ll tests to use the new CHECK-LABEL for easier debugging. No functionality change and all tests pass after conversion.	2013-07-13 20:38:47 +00:00
selpat.ll	Expand pseudos/macros for Selt. This is the last of the complex	2013-02-23 03:09:56 +00:00
setcc-se.ll	[mips] Print instructions "beq", "bne" and "or" using assembler pseudo	2013-07-26 18:34:25 +00:00
seteq.ll	Expand pseudos/macros:	2013-02-20 05:45:15 +00:00
seteqz.ll	Expand pseudos/macros:	2013-02-20 05:45:15 +00:00
setge.ll	Expand pseudos/macros:	2013-02-20 05:45:15 +00:00
setgek.ll	Expand pseudos/macros:	2013-02-20 05:45:15 +00:00
setle.ll	Expand pseudos/macros:	2013-02-20 05:45:15 +00:00
setlt.ll	Expand pseudos/macros:	2013-02-20 05:45:15 +00:00
setltk.ll	Expand pseudos/macros:	2013-02-20 05:45:15 +00:00
setne.ll	Expand pseudos/macros:	2013-02-20 05:45:15 +00:00
setuge.ll	Expand pseudos/macros:	2013-02-20 05:45:15 +00:00
setugt.ll	Expand pseudos/macros:	2013-02-20 05:45:15 +00:00
setule.ll	Expand pseudos/macros:	2013-02-20 05:45:15 +00:00
setult.ll	Expand pseudos/macros:	2013-02-20 05:45:15 +00:00
setultk.ll	Expand pseudos/macros:	2013-02-20 05:45:15 +00:00
sh1.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
shift-parts.ll	Expand 64-bit shifts if target ABI is O32.	2012-05-09 00:55:21 +00:00
simplebr.ll	Change the default branch instruction to be the 16 bit variety for mips16.	2013-11-12 02:27:12 +00:00
sint-fp-store_pattern.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
sitofp-selectcc-opt.ll	Test case for r160036.	2012-07-11 19:50:46 +00:00
sll1.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
sll2.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
small-section-reserve-gp.ll	In MipsDAGToDAGISel::SelectAddr, fold add node into address operand, if its	2012-08-24 20:21:49 +00:00
spill-copy-acreg.ll	[mips] Handle reading, writing or copying of ccond field of DSP control	2013-05-02 23:07:05 +00:00
sr1.ll	Last change for mips16 prolog/epilog cleanup and optimization.	2013-12-15 20:49:30 +00:00
sra1.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
sra2.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
srl1.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
srl2.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
stack-alignment.ll	[mips] Partially revert r193641. Stack alignment should not be determined by	2013-11-11 21:49:03 +00:00
stackcoloring.ll	Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.	2013-07-14 06:24:09 +00:00
stacksize.ll	Test case for r159240.	2012-06-27 00:40:34 +00:00
start-asm-file.ll	[mips] Remove reason for XFAIL from a test that isn't actually XFAILed.	2014-08-08 12:58:17 +00:00
stchar.ll	Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.	2013-07-14 06:24:09 +00:00
stldst.ll	checking test case for r164811. was an omission to not check this in. this was already approved	2012-10-01 21:35:06 +00:00
sub1.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
sub2.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
swzero.ll	Don't modify MO while use_iterator is still pointing to it.	2012-08-09 22:08:24 +00:00
tail16.ll	Fix a problem with mips16 stubs when calls are transformed during	2013-12-18 23:57:48 +00:00
tailcall.ll	[mips] Make sure there is a chain edge dependency between loads that read	2013-11-09 02:38:51 +00:00
tls-alias.ll	[pr19844] Add thread local mode to aliases.	2014-05-28 18:15:43 +00:00
tls-models.ll	Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.	2013-07-14 06:24:09 +00:00
tls.ll	Add extra CHECK prefix to tests with explicit prefix	2014-02-16 13:28:15 +00:00
tls16.ll	implement mips16 tls global addr	2012-10-26 22:57:32 +00:00
tls16_2.ll	Implement MipsHi for mips16	2012-10-27 00:57:14 +00:00
tnaked.ll	Update to remove the no-frame-pointer-elim-non-leaf flag if it was set to 'false'.	2013-08-22 21:28:54 +00:00
trap.ll	[mips] Implement llvm.trap intrinsic.	2013-07-26 20:58:55 +00:00
trap1.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
uitofp.ll	Fix bug 13532.	2012-08-28 02:12:42 +00:00
ul1.ll	Handled unaligned load/stores properly in Mips16	2012-09-15 01:02:03 +00:00
unalignedload.ll	[mips][mips64r6] [ls][dw][lr] are not available in MIPS32r6/MIPS64r6	2014-05-23 13:18:02 +00:00
vector-load-store.ll	MIPS DSP: add vector load/store patterns.	2012-09-27 01:50:59 +00:00
vector-setcc.ll	[mips] MipsTargetLowering::getSetCCResultType should return a vector type if	2013-01-04 20:06:01 +00:00
weak.ll	…
xor1.ll	1. Redo mips16 instructions to avoid multiple opcodes for same instruction.	2012-08-03 22:57:02 +00:00
zeroreg.ll	[mips][mips64r6] c.cond.fmt, mov[fntz], and mov[fntz].[ds] are not available on MIPS32r6/MIPS64r6	2014-06-12 13:39:06 +00:00