52 KiB

Raw Blame History

MLIR Rationale

This document is intended to capture some of the alternatives considered and open debates in the design of MLIR, along with the rationale for certain decisions we made. This is not intended to be a "finely groomed" document - we prefer the ability to dump in interesting tidbits without worrying too much about their consistency or readability.

[TOC]

Abstract

MLIR is a compiler intermediate representation with similarities to traditional three-address SSA representations (like LLVM IR or SIL), but which introduces notions from the polyhedral loop optimization works as first class concepts. This hybrid design is optimized to represent, analyze, and transform high level dataflow graphs as well as target-specific code generated for high performance data parallel systems. Beyond its representational capabilities, its single continuous design provides a framework to lower from dataflow graphs to high performance target specific code.

MLIR stands for one of "Multi-Level IR" or "Multi-dimensional Loop IR" or "Machine Learning IR" or "Mid Level IR", we prefer the first. This document only provides the rationale behind MLIR -- its actual specification document and other content is hosted elsewhere.

Introduction and Motivation

The Multi-Level Intermediate Representation (MLIR) is intended for easy expression and optimization of computations involving deep loop nests and dense matrices of high dimensionality. It is thus well-suited to deep learning computations in particular. Yet it is general enough to also represent arbitrary sequential computation. The representation allows high-level optimization and parallelization for a wide range of parallel architectures including those with deep memory hierarchies --- general-purpose multicores, GPUs, and specialized neural network accelerators.

MLIR uses ideas drawn from IRs of LLVM and Swift for lower level constructs while combining them with ideas from the polyhedral abstraction to represent loop nests, multidimensional data (tensors), and transformations on these entities as first class concepts in the IR.

MLIR is a multi-level IR, i.e., it represents code at a domain-specific representation such as HLO or TensorFlow graphs, all the way down to the machine level. MLIR is able to represent arbitrary control flow and arbitrary data accesses, and is general enough to represent nearly all sequential computation. This is a key distinction from existing polyhedral representation implementations (such as LLVM Polly) that are able to use the polyhedral abstraction in a way isolated from the LLVM IR and only for affine loop nests, i.e., portions of the code where array accesses, loop bounds, and conditionals are regular (involve linear functions of loop iterators and constant symbols). The presence of statically unpredictable data accesses or control flow does not preclude representation in MLIR, but only limits to a certain extent the ability to reason about and apply transformations using the polyhedral abstraction.

Maps, sets, and relations with affine constraints are the core structures underlying a polyhedral representation of high-dimensional loop nests and multidimensional arrays. These structures are represented as textual expressions in a form close to their mathematical form. These structures are used to capture loop nests, tensor data structures, and how they are reordered and mapped for a target architecture. All structured or "conforming" loops are captured as part of the polyhedral information, and so are tensor variables, their layouts, and subscripted accesses to these tensors in memory.

The information captured in the IR allows a compact expression of all loop transformations, data remappings, explicit copying necessary for explicitly addressed memory in accelerators, mapping to pre-tuned expert written primitives, and mapping to specialized vector instructions. Loop transformations that can be easily implemented include the body of affine transformations: these subsume all traditional loop transformations (unimodular and non-unimodular) such as loop tiling, interchange, permutation, skewing, scaling, relative shifting, reversal, fusion, and distribution/fission. Transformations on data layout such as padding and transforming to blocked layouts are also represented well via affine layout maps.

MLIR's design allows a progressive lowering to target-specific forms. Besides high-level transformations for loop nests and data layouts that a typical mid-level optimizer is expected to deal with, MLIR is also designed to perform certain low-level scheduling and mapping decisions that a typical backend IR is entrusted with: these include mapping to specialized vector instructions, auto-vectorization, and software pipelining. The need to support these transformations stems from the fact that neural network accelerators have specialized units that deal with large chunks of data whose computation maps back to chunks of more than one loop of the loop nests as viewed by a program at a level closer to the original specification. Such specialized units or instructions operate on multidimensional data chunks from a programmer's viewpoint. It thus makes it hard or infeasible for a backend operating on a very low-level IR close to assembly to lift and reconstruct loops and perform such a mapping. This is in contrast to classic instruction selection and scheduling in today's compilers that primarily only deals with the body of the innermost loop. MLIR also facilitates automatic mapping to expert pre-tuned primitives or vendor libraries operating on data at higher levels (or at the highest level) of the memory hierarchy.

In summary, MLIR is convenient for and closed under the kind of transformations needed to lower to general-purpose as well as specialized accelerators. It also allows one to build modular and reusable target independent and target dependent passes.

Design Decisions

This section sheds light on some of the design decisions -- some of these are indirectly implied by the specification document.

Loads and stores

The 'load' and 'store' instructions are specifically crafted to fully resolve to an element of a memref. These instructions take as arguments n+1 indices for an n-ranked tensor. This disallows the equivalent of pointer arithmetic or the ability to index into the same memref in other ways (something which C arrays allow for example). Furthermore, for the affine constructs, the compiler can follow use-def chains (e.g. through affine.apply operations) or through the map attributes of affine operations) to precisely analyze references at compile-time using polyhedral techniques. This is possible because of the restrictions on dimensions and symbols.

A scalar of element-type (a primitive type or a vector type) that is stored in memory is modeled as a 0-d memref. This is also necessary for scalars that are live out of for loops and if conditionals in a function, for which we don't yet have an SSA representation -- an extension to allow that is described later in this doc.

Symbols and types

The current MLIR disallows use of symbols in types. For example, when a tensor or memref dimension is statically unknown, it is denoted in the type as '?'. An SSA symbol is then bound to it when a memref is created. The actual value of the unknown dimension can be queried using the "dim" builtin as shown below.

Example:

func foo(...) {
  %A = alloc <8x?xf32, #lmap> (%N)
  ...
  call bar(%A) : (memref<8x?xf32, #lmap>)
}

func bar(%A : memref<8x?xf32, #lmap>) {
  // Type of %A indicates that %A has dynamic shape with 8 rows
  // and unknown number of columns. The number of columns is queried
  // dynamically using dim instruction.
  %N = dim %A, 1 : memref<8x?xf32, #lmap>

  affine.for %i = 0 to 8 {
    affine.for %j = 0 to %N {
      // A[i,j] += 1
      %s1 = affine.load %A[%i, %j] : memref<8x?xf32, #lmap>
      %s2 = add %s1, 1
      affine.store %s2, %A[%i, %j] : memref<8x?xf32, #lmap>
    }
  }
  return
}

An alternative design is to embed the reference to symbols directly in the type - memref<8x%Nxf32>. We went for the current approach in MLIR because it simplifies the design --- types remain immutable when the values of symbols change.

Block Arguments vs PHI nodes

MLIR Regions represent SSA using "block arguments" rather than PHI instructions used in LLVM. This choice is representationally identical (the same constructs can be represented in either form) but block arguments have several advantages:

LLVM PHI nodes always have to be kept at the top of a block, and transformations frequently have to manually skip over them. This is defined away with BB arguments.
LLVM has a separate function Argument node. This is defined away with BB arguments, because the arguments to the entry block serve this purpose.
Blocks of PHI nodes in LLVM execute atomically, which is surprising and super confusing to compiler engineers and it is easy to introduce bugs with this (very related to the "lost copy" problem in SSA lowering literature.) With the BB argument representation, this confusion is defined away.
The entry list of PHI nodes in LLVM are unordered, and some blocks have thousands of predecessors (e.g. unwind blocks). This can cause long compile time problems because transformations have to linearly scan this list. This is defined away with BB argument representation.
LLVM has no way to represent values that are available only in one successor but not the other, e.g. its invoke instruction cannot produce the exception value JUST on the exception edge. Instead, the landingpad instruction is a hack used to represent this. MLIR doesn't make use of this capability, but SIL uses it extensively, e.g. in the switch_enum instruction.

For more context, block arguments were previously used in the Swift SIL Intermediate Representation, and described in a talk on YouTube. The section of interest starts here.

Index type disallowed in vector/tensor/memref types

Index types are not allowed as elements of vector, tensor or memref type. Index types are intended to be used for platform-specific "size" values and may appear in subscripts, sizes of aggregate types and affine expressions. They are also tightly coupled with affine.apply and affine.load/store operations; having index type is a necessary precondition of a value to be acceptable by these operations. While it may be useful to have memref<?xindex> to express indirect accesses, e.g. sparse matrix manipulations or lookup tables, it creates problems MLIR is not ready to address yet. MLIR needs to internally store constants of aggregate types and emit code operating on values of those types, which are subject to target-specific size and alignment constraints. Since MLIR does not have a target description mechanism at the moment, it cannot reliably emit such code. Moreover, some platforms may not support vectors of type equivalent to index.

Indirect access use cases can be alternatively supported by providing and index_cast instruction that allows for conversion between index and fixed-width integer types, at the SSA value level. It has an additional benefit of supporting smaller integer types, e.g. i8 or i16, for small indices instead of (presumably larger) index type.

Bit width of a non-primitive types and `index` is undefined

The bit width of a compound type is not defined by MLIR, it may be defined by a specific lowering pass. In MLIR, bit width is a property of certain primitive type, in particular integers and floats. It is equal to the number that appears in the type definition, e.g. the bit width of i32 is 32, so is the bit width of f32. The bit width is not necessarily related to the amount of memory (in bytes) or the size of register (in bits) that is necessary to store the value of the given type. These quantities are target and ABI-specific and should be defined during the lowering process rather than imposed from above. For example, vector<3xi57> is likely to be lowered to a vector of four 64-bit integers, so that its storage requirement is 4 x 64 / 8 = 32 bytes, rather than (3 x 57) ceildiv 8 = 22 bytes as can be naively computed from the bitwidth. Individual components of MLIR that allocate space for storing values may use the bit size as the baseline and query the target description when it is introduced.

The bit width is not defined for dialect-specific types at MLIR level. Dialects are free to define their own quantities for type sizes.

Signless types

Integers in the builtin MLIR type system have a bitwidth (note that the index type has a symbolic width equal to the machine word size), but they do not have an intrinsic sign. This means that the "standard ops" operation set has things like addi and muli which do two's complement arithmetic, but some other operations get a sign, e.g. divis vs diviu.

LLVM uses the same design, which was introduced in a revamp rolled out in the LLVM 2.0 integer type. Prior to that, from LLVM 1.0 to 1.9, LLVM uses signed types like "sbyte" and "ubyte". This shift was important and has served LLVM well over the years. The reason this is important is that it is a good thing for an intermediate representation to represent the same computation with the same instruction. Signed types got in the way, because (e.g.) an "add of an sbyte" does the same computation as an "add of a ubyte", but the type system made them look artificially different. This split also required casts like "cast from sbyte to ubyte" which do nothing at the machine level. Removing signs from the type system eliminated these problems, making the compiler simpler.

More information about this split is available in an old talk on youtube talking about LLVM 2.0.

Note that this rationale only applies to the "standard ops" dialect in which we can express an opinion about its design. Other dialects generally try to model an external system, and should aim to reflect its design as closely as possible.

Splitting floating point vs integer operations

The MLIR "standard" operation set splits many integer and floating point operations into different categories, for example addf vs addi and cmpf vs cmpi (following the design of LLVM). These instructions are polymorphic on the number of elements in the type though, for example addf is used with scalar floats, vectors of floats, and tensors of floats (LLVM does the same thing with its scalar/vector types).

This split is important because floating point and integer operations are quite different in practice: for example, floating point values include NaN's, so integer comparisons and floating point comparisons should use different comparison opcodes. On the arithmetic side of things, floating point operations support rounding modes, floating point contractions, "fast math", and integers may want to have two's complement overflow behavior or be undefined on various forms of wrapping for performance.

We are a long way from this sort of thing being a priority to care about in MLIR, but since we have experience and know the right way to do this, we'd rather design it in from the beginning.

Since integers are signless, it is necessary to define the sign for integer comparison operations. This sign indicates how to treat the foremost bit of the integer: as sign bit or as most significant bit. For example, comparing two i4 values 0b1000 and 0b0010 yields different results for unsigned (8 > 3) and signed (-8 < 3) interpretations. This difference is only significant for order comparisons, but not for equality comparisons. Indeed, for the latter all bits must have the same value independently of the sign. Since both arguments have exactly the same bit width and cannot be padded by this operation, it is impossible to compare two values whose bit representations would differ while the values are interpreted as equal.

Specifying comparison kind as attribute

Unlike arithmetic, comparison operators share several common properties, e.g. they cannot be considered associative. In practice, comparisons are sometimes implemented by the same instruction or its variants so it makes sense to group them together at the IR level.

An alternative would be introducing ten distinct operators for all currently supported kinds of integer comparisons. These operators would have increased the number of "reserved" names used by standard operations as well as the size of the C++ API while their implementations would have been mostly identical.

The comparison kind is internally an integer attribute. However, for the sake of readability by humans, custom assembly form accepts string literals that are mapped to the underlying integer values: cmpi "eq", %lhs, %rhs better implies integer equality comparison than cmpi 0, %lhs, %rhs where it is unclear what gets compared to what else. This syntactic sugar is possible thanks to parser logic redefinitions for custom assembly form of non-builtin operations. Supporting it in the full notation would have required changing how the main parsing algorithm works and may have unexpected repercussions. While it had been possible to store the predicate as string attribute, it would have rendered impossible to implement switching logic based on the comparison kind and made attribute validity checks (one out of ten possible kinds) more complex.

'select' operation to implement min/max

Although min and max operations are likely to occur as a result of transforming affine loops in ML functions, we did not make them first-class operations. Instead, we provide the select operation that can be combined with cmpi to implement the minimum and maximum computation. Although they now require two operations, they are likely to be emitted automatically during the transformation inside MLIR. On the other hand, there are multiple benefits of introducing select: standalone min/max would concern themselves with the signedness of the comparison, already taken into account by cmpi; select can support floats transparently if used after a float-comparison operation; the lower-level targets provide select-like instructions making the translation trivial.

This operation could have been implemented with additional control flow: %r = select %cond, %t, %f is equivalent to

^bb0:
  cond_br %cond, ^bb1(%t), ^bb1(%f)
^bb1(%r):

However, this control flow granularity is not available in the ML functions where min/max, and thus select, are likely to appear. In addition, simpler control flow may be beneficial for optimization in general.

Regions

Attributes of type 'Block'

We considered representing regions through ArrayAttrs containing a list of a special type IRBlockAttr, which in turn would contain a list of operations. All attributes in MLIR are unique’d within the context, which would make the IR inside the regions immortal for no good reason.

Use "inlined" functions as regions

We considered attaching a "force-inline" attribute on a function and/or a function call operation. Even the minimal region support (use cases in affine.for and affine.if existing before the regions) requires access to the values defined in the dominating block, which is not supported by functions. Conceptually, function bodies are instances of regions rather than the inverse; regions can also be device kernels, alternative sections, etc.

Dedicated `region` operation

This would mean we have a special kind of operation that is allowed to have regions while other operations are not. Such distinction is similar to the Stmt/Op difference we have had and chose to remove to make the IR simpler and more flexible. It would also require analyses and passes to consider the interplay between operations (e.g., an affine.for operation must be followed by a region operation). Finally, a region operation can be introduced using the current implementation, among other operations and without being special in any sense.

Explicit capture of the values used in a region

Being able to use values defined outside the region implies that use-def chains may contain uses from different nested regions. Consequently, IR transformations and analyses can pull the instruction defining the value across region boundaries, for example in case of TableGen-defined canonicalization patterns. This would not be the case if all used values had been passed as region arguments. One of the motivations for introducing regions in the IR is precisely to enable cross-region analyses and transformations that are simpler than inter-procedural transformations. Having uses from different regions appear in the same use-def chain, contrary to an additional data structure maintaining correspondence between function call arguments as uses of the original definitions and formal arguments as new definitions, enables such simplification. Since individual operations now belong to blocks, which belong to regions, it is always possible to check if the definition of the value belongs to the same region as its particular use. The risk is that any IR traversal will need to handle explicitly this situation and it is easy to forget a check (or conversely it isn’t easy to design the right check in a tablegen pattern for example): traversing use-def chains potentially crosses implicitly semantic barriers, making it possible to unknowingly break region semantics. This is expected to be caught in the verifier after the transformation.

At the same time, one may choose to pass certain or all values as region arguments to explicitly break the use-def chains in the current proposal. This can be combined with an attribute-imposed semantic requirement disallowing the body of the region to refer to any value from outside it.

Quantized integer operations

We haven't designed integer quantized operations in MLIR, but experience from TensorFlow suggests that it is better to put information about the quantization range/scale into the type itself, rather than have a single type like "qint8" and put these on attributes of the operation.

There are a few ways to do this with MLIR, including at least:

We could do the same thing TensorFlow does - and we will have to support that model to some extent for compatibility.
We can encode the fp range of quantized integers directly into the types when they are constants. The best practice on this seems to be to encode the zero point as well as a scale factor. This ensures that 0.0 is always exactly representable, e.g. qi8<-1.42, 31.23x>.
We could theoretically encode dynamically determined ranges into the types using something like qi8<?,?> with the bounds being determined through the SSA dataflow graph dynamically - similar to how dynamic shapes are handled.

We will definitely need to do #1 for compatibility, we probably want to do #2, and we should investigate #3 over time. That said, our short term plan is to get more implementation experience with the rest of the system first, then come back to re-examine the representation for quantized arithmetic when we have that experience. When we do, we should chat with benoitjacob@ and read the paper.

Dialect type extensions

This section describes the design decisions that shaped the dialect extensible type system present in MLIR.

Reserving dialect type kinds

Dialects that wish to define type extensions must reserve a range of type kinds within a '.def' file within the core IR library. This means that every dialect wishing to define custom types must modify this file, but it guarantees that all type casting checkings are performed in O(1) time.

Interactions between dialects

There are two different interactions between dialects that are important to understand. When types of a dialect are:

In operations of other dialects
- For standard/builtin operations, only standard/builtin types are allowed. This restriction allows for operations to clearly understand the invariants that they are working under.
- Outside of standard/builtin operations, dialects are expected to verify the allowable operation types per operation.
In types of other dialects
- For standard/builtin types, these types are allowed to contain types from other dialects. This simplifies the type system and removes the need for dialects to redefine all of the standard aggregate types, e.g. tensor, as well as the memref type. Dialects are expected to verify that a specific type is valid within a standard type, e.g. if a type can be an element of a tensor.
- For dialect types, the dialect is expected to verify any type invariants, e.g. if the standard tensor type can contain a specific type of that dialect.

Separating builtin and standard types

Following the separation between the built-in and standard dialect, it makes sense to separate built-in types and standard dialect types. Built-in types are required for the validity of the IR itself, e.g. the function type (which appears in function signatures and generic assembly forms of operations). Integer, float, vector, memref and tensor types, while important, are not necessary for IR validity.

Unregistered types

MLIR supports unregistered operations in generic assembly form. MLIR also supports a similar concept for types. When parsing, if the dialect for dialect type has not been registered the type is modeled as an 'OpaqueType'. This allows for types to be round-tripped without needing to link in the dialect library that defined them. No additional information about opaque types, outside of parsing/printing, will be available.

Dialect type syntax

Dialect extended types are represented as string literals wrapped inside of the dialect namespace. This means that the parser delegates to the dialect for parsing specific type instances. This differs from the representation of dialect defined operations, of which have an identifier name that the parser uses to identify and parse them.

This representation was chosen for several reasons:

Dialects must provide custom type parsers

Dialect type parsing cannot plug into the existing parser infrastructure as operations do with the OpAsmParser/Printer. Operations have a defined syntax structure that is the same across all dialects. Types, on the other hand, may have many different, and sometimes conflicting, parsing constraints that would be difficult/unmaintainable to provide within a single interface.

This also has the added benefit of encouraging dialects to reuse existing external type parsers. For example, an LLVM dialect may provide an MLIR LLVM type that is simply a wrapper around LLVM types. The LLVM dialect would then use the existing LLVM type parsing infrastructure.

Example:

%s = "foo"() : () -> !llvm<"i32*">

Types do not always have canonical names

Unlike operations, types generally do not have a formal canonical name. For example, function types have no defined keyword and integer types are defined by a regular expression to support arbitrary bitwidth. Dialects with existing type systems, e.g. LLVM, are likely to provide wrappers around their existing type systems. For these wrapper types there is no simple canonical name, it's logical to think of these types as existing within the namespace of the dialect. If a dialect wishes to assign a canonical name to a type, it can be done via type aliases.

Tuple types

The MLIR type system provides first class support for defining tuple types. This is due to the fact that Tuple represents a universal concept that is likely to, and has already begun to, present itself in many different dialects. Though this type is first class in the type system, it merely serves to provide a common mechanism in which to represent this concept in MLIR. As such, MLIR provides no standard operations for interfacing with tuple types. It is up to dialect authors to provide operations, e.g. extract_tuple_element, to interpret and manipulate them. When possible, operations should prefer to use multiple results instead. These provide a myriad of benefits, such as alleviating any need for tuple-extract operations that merely get in the way of analysis and transformation.

Assembly forms

MLIR decides to support both generic and custom assembly forms under the following considerations:

MLIR is an open system; it is designed to support modular and pluggable dialects. Depending on whether there exists a corresponding dialect and whether the dialect is plugged in, operations may or may not be registered into MLIR system. Yet we still need a way to investigate these operations. So the generic assembly form is mandated by this aspect of MLIR system. It provides a default textual form for operations.

On the other hand, an assembly form is for assisting developers to investigate the IR. The generic form serves as a safe fallback but it can be too verbose for certain ops. Therefore, MLIR gives each dialect the choice to define a custom assembly form for each operation according to the operation's semantics and specific needs. The custom assembly form can de-duplicate information from the operation to derive a more concise form, thus better facilitating the comprehension of the IR.

Examples

This section describes a few very simple examples that help understand how MLIR represents computation.

Non-affine control flow

// A simple linear search in every row of a matrix
for (i = 0; i < N; i++) {
  for (j = 0; j < N; j++) {
    // dynamic control flow
    if (a[i][j] == key) {
      s[i] = j;
      break;
    }
  }
}

The presence of dynamic control flow leads to an inner non-affine function nested in an outer function that using affine loops.

func @search(%A: memref<?x?xi32, %S: <?xi32>, %key : i32) {
  %ni = dim %A, 0 : memref<?x?xi32>
  // This loop can be parallelized
  affine.for %i = 0 to %ni {
    call @search_body (%A, %S, %key, %i) : (memref<?x?xi32>, memref<?xi32>, i32, i32)
  }
  return
}

func @search_body(%A: memref<?x?xi32>, %S: memref<?xi32>, %key: i32, %i : i32) {
  %nj = dim %A, 1 : memref<?x?xi32>
  br ^bb1(0)

^bb1(%j: i32)
  %p1 = cmpi "lt", %j, %nj : i32
  cond_br %p1, ^bb2, ^bb5

^bb2:
  %v = affine.load %A[%i, %j] : memref<?x?xi32>
  %p2 = cmpi "eq", %v, %key : i32
  cond_br %p2, ^bb3(%j), ^bb4

^bb3(%j: i32)
  affine.store %j, %S[%i] : memref<?xi32>
  br ^bb5

^bb4:
  %jinc = addi %j, 1 : i32
  br ^bb1(%jinc)

^bb5:
  return
}

As per the MLIR spec, the restrictions on dimensions and symbol identifiers to be used with the affine.apply operation only apply to accesses inside affine.for and affine.if operations. However, an analysis of accesses inside the called function (@search_body) is necessary to determine if the %i loop could be parallelized: such function access analysis is calling context sensitive.

Non-affine loop bounds

Loop bounds that are not affine lead to a nesting of functions as shown below.

for (i = 0; i < N; i++)
  for (j = 0; j < N; j++)
    // Non-affine loop bound for k loop.
    for (k = 0; k < pow(2, j); k++)
       for (l = 0; l < N; l++) {
        // block loop body
        ...
       }

func @outer_nest(%n : index) {
  affine.for %i = 0 to %n {
    affine.for %j = 0 to %n {
      %pow = call @pow(2, %j) : (index, index) ->  index
      call @inner_nest(%pow, %n) : ...
    }
  }
  return
}

func @inner_nest(%m : index, %n : index) {
  affine.for %k = 0 to %m {
    affine.for %l = 0 to %n {
      ...
    }
  }
  return
}

Reference 2D Convolution

The following example illustrates a reference implementation of a 2D convolution, which uses an integer set #domain to represent valid input data in a dilated convolution.

// Dilation factors S0 and S1 can be constant folded if constant at compile time.
#domain = (d0, d1)[S0,S1,S2,S3]: (d0 % S0 == 0, d1 % S1 == 0, d0 >= 0, d1 >= 0,
                                   S3 - d0 - 1 >= 0, S4 - d1 - 1 >= 0)
// Identity map (shown here for illustration).
#map0 = (d0, d1, d2, d3, d4, d5, d6) -> (d0, d1, d2, d3, d4, d5, d6)

// Affine map from output to input coordinate space.
// d0 = output_h, d1 = output_w, d2 = kernel_h, d3 = kernel_w
// S0 = h_stride, S1 = w_stride, S2 = h_kernel_dilation, S3 = w_kernel_dilation
// S4 = h_pad_low, S5 = w_pad_low
//     %out0 =  %0#1 * %h_stride + %0#4 * %h_kernel_dilation - %h_pad_low
//     %out1=  %0#2 * %w_stride + %0#5 * %w_kernel_dilation - %w_pad_low
#map1_0 = (d0, d1, d2, d3) [S0, S1, S2, S3, S4, S5] -> (d0 * S0 + d2 * S2 - %S4)
#map1_1 = (d0, d1, d2, d3) [S0, S1, S2, S3, S4, S5] -> (d1 * S1 + d3 * S3 - %S5)

// Semi-affine map to undilated input coordinate space.
// d0 = input_h, d1 = input_w, S0 = h_base_dilation, S1 = w_base_dilation.
#map2_0 = (d0, d1) [S0, S1] -> (d0 / S0)
#map2_1 = (d0, d1) [S0, S1] -> (d1 / S1)

// Conv2D shapes:
// input:   [batch, input_height, input_width, input_feature]
// kernel: [kernel_height, kernel_width, input_feature, output_feature]
// output: [batch, output_height, output_width, output_feature]
func @conv2d(%input: memref<16x1024x1024x3xf32, #lm0, /*scratchpad=*/1>,
             %kernel: memref<5x5x3x32xf32, #lm0, /*scratchpad=*/1>,
             %output: memref<16x512x512x32xf32, #lm0, /*scratchpad=*/1>) {
  affine.for %b = 0 to %batch {
    affine.for %oh = 0 to %output_height {
      affine.for %ow = 0 to %output_width {
        affine.for %of = 0 to %output_feature {
          affine.for %kh = 0 to %kernel_height {
            affine.for %kw = 0 to %kernel_width {
              affine.for %if = 0 to %input_feature {
                // Calculate input indices.
                %1_0 = affine.apply #map1_0 (%0#1, %0#2, %0#4, %0#5)
                  [%h_stride, %w_stride, %h_kernel_dilation, %w_kernel_dilation,
                   %h_pad_low, %w_pad_low]
                %1_1 = affine.apply #map1_1 (%0#1, %0#2, %0#4, %0#5)
                  [%h_stride, %w_stride, %h_kernel_dilation, %w_kernel_dilation,
                   %h_pad_low, %w_pad_low]

                // Check if access is not in padding.
                affine.if #domain(%1_0, %1_1)
                                       [%h_base_dilation, %w_kernel_dilation, %h_bound, %w_bound] {
                  %2_0 = affine.apply #map2 (%1_0, %1_1)
                  %2_1 = affine.apply #map2 (%1_0, %1_1)
                  // Compute: output[output_indices] += input[input_indices] * kernel[kernel_indices]
                  call @multiply_accumulate(%input, %kernel, %output, %b, %oh, %ow, %of, %kh, %kw, %if, %2_0, %2_1)
                }
              }
            }
          }
        }
      }
    }
  }
  return
}

TODO (Add more examples showing the IR for a variety of interesting cases)

Design alternatives and extensions

This is a list of some design alternatives and extensions that we discussed in detail but did not include in the spec or postponed them for future consideration on demand. We will revisit these discussions when we have more implementation experience and learn more about the challenges and limitations of our current design in practice.

Polyhedral code representation alternatives: schedule lists vs schedules trees vs affine loop/if forms

The current MLIR uses a representation of polyhedral schedules using a tree of if/for loops. We extensively debated the tradeoffs involved in the typical unordered polyhedral instruction representation (where each instruction has multidimensional schedule information), discussed the benefits of schedule tree forms, and eventually decided to go with a syntactic tree of affine if/else conditionals and affine for loops. Discussion of the tradeoff was captured in this document: MLIR: The case for a simplified polyhedral form.

At a high level, we have two alternatives here:

Schedule tree representation instead of an affine loop AST form: The current proposal uses an affine loop and conditional tree form, which is syntactic and with no separation of domains as sets and schedules as multidimensional affine functions. A schedule tree form however makes polyhedral domains and schedules a first class concept in the IR allowing compact expression of transformations through the schedule tree without changing the domains of instructions. Such a representation also hides prologues, epilogues, partial tiles, complex loop bounds and conditionals making loop nests free of "syntax". Cost models instead look at domains and schedules. In addition, if necessary such a domain schedule representation can be normalized to explicitly propagate the schedule into domains and model all the cleanup code. An example and more detail on the schedule tree form is in the next section.
Having two different forms of "affine regions": an affine loop tree form and a polyhedral schedule tree form. In the latter, ops could carry attributes capturing domain, scheduling, and other polyhedral code generation options with IntegerSet, AffineMap, and other attributes.

Schedule Tree Representation for Affine Regions

This representation is based on a simplified form of the domain/schedule representation used by the polyhedral compiler community. Domains represent what has to be executed while schedules represent the order in which domain elements are interleaved. We model domains as non-piece-wise convex integer sets, and schedules as affine functions; however, the former can be disjunctive, and the latter can be piece-wise affine relations. In the schedule tree representation, domain and schedules for instructions are represented in a tree-like structure which is called a schedule tree. Each non-leaf node of the tree is an abstract polyhedral dimension corresponding to an abstract fused loop for each ML instruction that appears in that branch. Each leaf node is an ML Instruction.

// A tiled matmul code (128x128x128) represented in schedule tree form

// #map0 = (d0, d1, d2, d3, d4, d5) -> (128*d0 + d3, 128*d1 + d4, 128*d2 + d5)
#intset_ij = (i, j) [M, N, K]  : i >= 0, -i + N - 1 >= 0, j >= 0, -j + N-1 >= 0
#intset_ijk = (i, j, k) [M, N, K] : i >= 0, -i + N - 1 >= 0, j >= 0,
                                     -j +  M-1 >= 0, k >= 0, -k + N - 1 >= 0)
func @matmul(%A, %B, %C, %M, %N, %K) : (...)  { // %M, N, K are symbols
  // t1, t2, t3, t4, t5, t6  are abstract polyhedral loops
  mldim %t1 : {S1,S2,S3,S4,S5}  floordiv (i, 128) {
    mldim %t2 : {S1,S2,S3,S4,S5}  floordiv (j, 128) {
      // (%i, %j) = affine.apply (d0, d1) -> (128*d0, 128*d1) (%t1, %t2)
      call dma_mem_to_scratchpad(%C, %i, %j, %M, %N, %K)
          with @intset_ij(%i, %j) [%M, %N, %K]
      mldim %t3 :   {S2,S3,S4,S5} floordiv (k, 128) {
        // (%i, %j, %k) = affine.apply (d0, d1, d2)
        //                          -> (128*d0, 128*d1, 128*d2)  (%t1, %t2, %t3)
        call dma_mem_to_scratchpad(%A, ...) with #inset_ijk (%i, %j, %k) [%M, %N, %K]
        // (%i, %j, %k) = affine.apply (d0, d1, d2)
        //                          -> (128*d0, 128*d1, 128*d2)  (%t1, %t2, %t3)
        call dma_mem_to_scratchpad(%B, ...) with #inset_ijk (%i, %j, %k) [%M, %N, %K]
        mldim %t4 : {S4} i mod 128 {
          mldim %t5 : {S4} j mod 128 {
            mldim %t6 : {S4} k mod 128 {
              // (%i, %j, %k) = affine.apply #map0 (%t1, %t2, %t3, %t4, %t5, %t6)
              call matmul_body(A, B, C, %i, %j, %k, %M, %N, %K)
                  with #inset_ijk(%i, %j, %k) [%M, %N, %K]
            } // end mld4im t6
          } // end mldim t5
        } // end mldim t4
      } // end mldim t3
      // (%i, %j) = affine.apply (d0, d1) -> (128*d0, 128*d1) (%t1, %t2)
      call $dma_scratchpad_to_mem_C ... with #intset(%i, %j) [%M, %N, %K]
    }  // end mldim t2
  } // end mldim t1
  return
}

Affine Relations

The current MLIR spec includes affine maps and integer sets, but not affine relations. Affine relations are a natural way to model read and write access information, which can be very useful to capture the behavior of opaque external library calls, high-performance vendor libraries, or user-provided / user-tuned routines.

An affine relation is a relation between input and output dimension identifiers while being symbolic on a list of symbolic identifiers and with affine constraints on the identifiers.

Syntax:

// Affine relation definition at the top of file
affine-rel-def ::= affine-rel-id `=` affine-relation-inline

affine-rel-id ::= `##` prefixed-id

affine-relation-inline ::=
       `(` input-dims `)` (`[` symbols `]`)? `->`
       `(` output-dims `)` :  affine-constraint-conjunction

input-dims ::= bare-id-list
output-dims ::= bare-id-list
symbols ::= bare-id-list

affine-rel ::= affine-rel-id | affine-relation-inline

// Usage
affine-rel-spec ::= affine-rel dim-and-symbol-use-list

All identifiers appearing in input-dims, output-dims, and symbol-dims are pairwise distinct. All affine-constraint non-terminals in the above syntax are allowed to contain identifiers only from input-dims, output-dims, and symbol-dims.

Affine relations are used to model read, write, may_read, and may_write sets of functions in the IR. The output dimension identifiers correspond to the data dimensions.

Example:

// read relation: two elements ( d0 <= r0 <= d0+1 )
##aff_rel9 = (d0) -> (r0) : r0 - d0 >= 0, d0 - r0 + 1 >= 0

func @count (%A : memref<128xf32>, %pos : i32) -> f32
  reads: {%A ##aff_rel9 (%pos)}
  writes: /* empty */
  may_reads: /* empty */
  may_writes: /* empty */ {
bb0 (%0, %1: memref<128xf32>, i64):
  %val = affine.load %A [%pos]
  %val = affine.load %A [%pos + 1]
  %p = mulf %val, %val : f32
  return %p : f32
}

Regions

Making function definition an operation

MLIR supports values of a Function type. Instead of having first-class IR concept for functions, one could define an operation with a body region that defines a function value. The particularity of functions is that their names are globally visible and can be referred to before being defined, unlike SSA values that must be defined first. Implementing a "function definition" operation would require to relax some of the SSA constraints in a region, and also make the IR Module a region as well. It would also affect the core infrastructure (e.g., function passes) only for the sake of concept unification.

Having types on a region

Instead of inspecting the types of arguments of the first block, one could give the region itself a type. This type would be redundant with block argument types, which must have values and create room for type mismatches. While functions do have types that are partly redundant with the arguments of the first block in the function, this is necessary to support function declarations that do not have a body which we can refer to in order to obtain the argument types. A region is always contained in an operation or a function that can be queried to obtain the “type” of the region if necessary.

A type on a region can be justified if Regions were to be considered separately from the enclosing entity (operation or function) and had their own semantics that should be checked.

Attaching attributes to regions

Regions could be annotated with dialect attributes to use attribute verification hooks. An operation could take multiple regions as arguments, and each of them may require different attributes. However, there are currently very few practical cases where this would be necessary. Instead, one could simulate per-region attributes with array attributes attached to the entity containing the region (operation or function). This decreases the overall complexity of the IR and enables more concise and op-specific forms, e.g., when all regions of an op have the same attribute that can be only mentioned once. Since the semantics of the region is entirely defined by the enclosing entity, it also makes sense to have attributes attached to that entity rather than to the region itself.

This can be reconsidered in the future if we see a non-neglectable amount of use cases.

Read/Write/May_Read/May_Write sets for External Functions

Having read, write, may_read, and may_write sets for external functions which include opaque ones, high-performance vendor libraries such as CuDNN, CuB, MKL, FFT libraries, user-provided/optimized functions, or data movement runtimes such as DMA ones is a powerful feature. It allows the compiler to perform analysis, composition/transformation in the presence of such calls and with loops around such calls on sub-tensors. For user-provided or custom hand-tuned functions, the read/write/may_read/may_write sets could be provided a-priori by a user as part of the external function signature or they could be part of a database.

TODO: Design this, and update to use function attribute syntax.

Example:

##rel9 ( ) [s0] -> (r0, r1) : 0 <= r0 <= 1023, 0 <= r1 <= s0 - 1

func @cblas_reduce_ffi(%M: memref<1024 x ? x f32, #layout_map0, /*mem=*/0>)
  -> f32 [
  reads: {%M, ##rel9() }
  writes: /* empty */
  may_reads: /* empty */
  may_writes: /* empty */
]

func @dma_mem_to_scratchpad(%a : memref<1024 x f32, #layout_map0, /*mem=*/0>,
    %b : memref<1024 x f32, #layout_map0, 1>, %c : memref<1024 x f32,
    #layout_map0>) [
  reads: {%M, ##rel9() }
  writes: /* empty */
  may_reads: /* empty */
  may_writes: /* empty */
 ]

Memref Extensions

Arbitrary polyhedral shapes for tensors: e.g., triangular shapes in tensor dimensions where there is symmetry: use integer set (affine constraints) to model tensor data space (instead of just extents). Requires some changes to the IR and the in-memory form.
Layout maps
1. Allow piece-wise affine maps for layouts: allows clean modeling of boundary cases for images/tensors through padding, wrapping, mirroring, padding where padded values are the results of computation as opposed to data, padding in the interior as opposed to just boundaries.
2. Allow many-to-one layout maps: Index and layout maps in the current proposal are bijective. Extending them to many-to-one layout maps allows cleaner(?) modeling of broadcast/reduce style computations while reusing memory.
Proposal 2(a) requires non-trivial changes to the IR and the in-memory representation. 2(b) requires no change, but impacts how cost models look at index and layout maps.

`affine.if` and `affine.for` Extensions for "Escaping Scalars"

We considered providing a representation for SSA values that are live out of if/else conditional bodies and loop carried in affine.for loops. We ultimately abandoned this approach due to its complexity. In the current design of MLIR, scalar variables cannot escape for loops or if instructions. In situations, where escaping is necessary, we use zero-dimensional tensors and memrefs instead of scalars.

TODO: This whole section is obsolete and should be updated to use block arguments and a yield like terminator in for/if instructions.

The abandoned design of supporting escaping scalars is as follows:

affine.for Instruction

Syntax:

[<out-var-list> =]
for %<index-variable-name> = <lower-bound> ... <upper-bound> step <step>
   [with <in-var-list>] { <loop-instruction-list> }

out-var-list is a comma separated list of SSA values defined in the loop body and used outside the loop body. in-var-list is a comma separated list of SSA values used inside the loop body and their initializers. loop-instruction-list is a list of instructions that may also include a yield instruction.

Example:

// Return sum of elements in 1-dimensional mref A
func i32 @sum(%A : memref<?xi32>, %N : i32) -> (i32) {
   %init = 0
   %result = affine.for %i = 0 to N with %tmp(%init) {
      %value = affine.load %A[%i]
      %sum = %value + %tmp
      yield %sum
   }
   return %result : i32
}

affine.if/else Instruction

Syntax:

<out-var-list> = affine.if (<cond-list>) {...} [else {...}]

Out-var-list is a list of SSA values defined by the if-instruction. The values are arguments to the yield-instruction that occurs in both then and else clauses when else clause is present. When if instruction contains only if clause, the escaping value defined in the then clause should be merged with the value the variable had before the if instruction. The design captured here does not handle this situation.

Example:

// Compute sum of half of the array
func i32 @sum_half(%A : memref<?xi32>, %N : i32) -> (i32) {
   %s0 = 0
   %s1 = affine.for %i = 1 ... N step 1 with %s2 (%s0) {
       %s3 = if (%i >= %N / 2) {
          %v0 = affine.load %A[%i]
          %s4 = %s2 + %v0
          yield %s4
       }
       yield %s3
   }
   return %s1 : i32
}

Multithreading the compiler

People want compilers to go fast, and one simple way to do that is to multi-thread them. There are multiple strategies for this, but a simple one is to optimize and compile separate functions in parallel. LLVM's original pass manager anticipated this demand, and the CallGraphSCCPass manager is even designed to support this as well, but unfortunately, a few early design decisions in LLVM prevent this from ever happening. Instead, things like ThinLTO are forced to split programs into separate LLVM modules/context and optimize those chunks independently.

The problem is that LLVM has several objects in its IR that are globally uniqued and also mutable: notably constants like i32 0. In LLVM, these constants are Value's, which allow them to be used as operands to instructions, and that they also have SSA use lists. Because these things are uniqued, every i32 0 in any function shares a use list. This means that optimizing multiple functions in parallel won't work (at least without some sort of synchronization on the use lists, which would be unbearably inefficient).

MLIR now supports a multithreaded pass manager. We do this through several design choices:

MLIR makes use of extensive uniqued immutable data structures (affine expressions, types, etc are all immutable, uniqued, and immortal).
Constants are defined in per-function pools, instead of being globally uniqued.
Functions themselves are not SSA values either, so they don't have the same problem as constants.
FunctionPasses are copied (through their copy ctor) into one instance per thread, avoiding sharing of local state across threads.

This allows MLIR function passes to support efficient multithreaded compilation and code generation.

52 KiB Raw Blame History Unescape Escape

MLIR Rationale

Abstract

Introduction and Motivation

Design Decisions

Loads and stores

Symbols and types

Block Arguments vs PHI nodes

Index type disallowed in vector/tensor/memref types

Bit width of a non-primitive types and index is undefined

Signless types

Splitting floating point vs integer operations

Specifying sign in integer comparison operations

Specifying comparison kind as attribute

'select' operation to implement min/max

Regions

Attributes of type 'Block'

Use "inlined" functions as regions

Dedicated region operation

Explicit capture of the values used in a region

Quantized integer operations

Dialect type extensions

Reserving dialect type kinds

Interactions between dialects

Separating builtin and standard types

Unregistered types

Dialect type syntax

Dialects must provide custom type parsers

Types do not always have canonical names

Tuple types

Assembly forms

Examples

Non-affine control flow

Non-affine loop bounds

Reference 2D Convolution

Design alternatives and extensions

Polyhedral code representation alternatives: schedule lists vs schedules trees vs affine loop/if forms

Schedule Tree Representation for Affine Regions

Affine Relations

Regions

Making function definition an operation

Having types on a region

Attaching attributes to regions

Read/Write/May_Read/May_Write sets for External Functions

Memref Extensions

affine.if and affine.for Extensions for "Escaping Scalars"

affine.for Instruction

affine.if/else Instruction

Multithreading the compiler

52 KiB

Raw Blame History

Bit width of a non-primitive types and `index` is undefined

Dedicated `region` operation

`affine.if` and `affine.for` Extensions for "Escaping Scalars"