maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/lib/Target/X86/X86FrameLowering.cpp

2061 lines
76 KiB
C++
Raw Blame History

//===-- X86FrameLowering.cpp - X86 Frame Information ----------------------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file contains the X86 implementation of TargetFrameLowering class.
//
//===----------------------------------------------------------------------===//
#include "X86FrameLowering.h"
#include "X86InstrBuilder.h"
#include "X86InstrInfo.h"
#include "X86MachineFunctionInfo.h"
#include "X86Subtarget.h"
#include "X86TargetMachine.h"
#include "llvm/ADT/SmallSet.h"
#include "llvm/CodeGen/MachineFrameInfo.h"
#include "llvm/CodeGen/MachineFunction.h"
#include "llvm/CodeGen/MachineInstrBuilder.h"
#include "llvm/CodeGen/MachineModuleInfo.h"
#include "llvm/CodeGen/MachineRegisterInfo.h"
#include "llvm/IR/DataLayout.h"
#include "llvm/IR/Function.h"
#include "llvm/MC/MCAsmInfo.h"
#include "llvm/MC/MCSymbol.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Target/TargetOptions.h"
#include "llvm/Support/Debug.h"
#include <cstdlib>
using namespace llvm;
// FIXME: completely move here.
extern cl::opt<bool> ForceStackAlign;
bool X86FrameLowering::hasReservedCallFrame(const MachineFunction &MF) const {
return !MF.getFrameInfo()->hasVarSizedObjects() &&
!MF.getInfo<X86MachineFunctionInfo>()->getHasPushSequences();
}
/// canSimplifyCallFramePseudos - If there is a reserved call frame, the
/// call frame pseudos can be simplified. Having a FP, as in the default
/// implementation, is not sufficient here since we can't always use it.
/// Use a more nuanced condition.
bool
X86FrameLowering::canSimplifyCallFramePseudos(const MachineFunction &MF) const {
const X86RegisterInfo *TRI = static_cast<const X86RegisterInfo *>
(MF.getSubtarget().getRegisterInfo());
return hasReservedCallFrame(MF) ||
(hasFP(MF) && !TRI->needsStackRealignment(MF))
|| TRI->hasBasePointer(MF);
}
// needsFrameIndexResolution - Do we need to perform FI resolution for
// this function. Normally, this is required only when the function
// has any stack objects. However, FI resolution actually has another job,
// not apparent from the title - it resolves callframesetup/destroy
// that were not simplified earlier.
// So, this is required for x86 functions that have push sequences even
// when there are no stack objects.
bool
X86FrameLowering::needsFrameIndexResolution(const MachineFunction &MF) const {
return MF.getFrameInfo()->hasStackObjects() ||
MF.getInfo<X86MachineFunctionInfo>()->getHasPushSequences();
}
/// hasFP - Return true if the specified function should have a dedicated frame
/// pointer register. This is true if the function has variable sized allocas
/// or if frame pointer elimination is disabled.
bool X86FrameLowering::hasFP(const MachineFunction &MF) const {
const MachineFrameInfo *MFI = MF.getFrameInfo();
const MachineModuleInfo &MMI = MF.getMMI();
const TargetRegisterInfo *RegInfo = MF.getSubtarget().getRegisterInfo();
return (MF.getTarget().Options.DisableFramePointerElim(MF) ||
RegInfo->needsStackRealignment(MF) ||
MFI->hasVarSizedObjects() ||
MFI->isFrameAddressTaken() || MFI->hasInlineAsmWithSPAdjust() ||
MF.getInfo<X86MachineFunctionInfo>()->getForceFramePointer() ||
MMI.callsUnwindInit() || MMI.callsEHReturn() ||
MFI->hasStackMap() || MFI->hasPatchPoint());
}
static unsigned getSUBriOpcode(unsigned IsLP64, int64_t Imm) {
if (IsLP64) {
if (isInt<8>(Imm))
return X86::SUB64ri8;
return X86::SUB64ri32;
} else {
if (isInt<8>(Imm))
return X86::SUB32ri8;
return X86::SUB32ri;
}
}
static unsigned getADDriOpcode(unsigned IsLP64, int64_t Imm) {
if (IsLP64) {
if (isInt<8>(Imm))
return X86::ADD64ri8;
return X86::ADD64ri32;
} else {
if (isInt<8>(Imm))
return X86::ADD32ri8;
return X86::ADD32ri;
}
}
static unsigned getSUBrrOpcode(unsigned isLP64) {
return isLP64 ? X86::SUB64rr : X86::SUB32rr;
}
static unsigned getADDrrOpcode(unsigned isLP64) {
return isLP64 ? X86::ADD64rr : X86::ADD32rr;
}
static unsigned getANDriOpcode(bool IsLP64, int64_t Imm) {
if (IsLP64) {
if (isInt<8>(Imm))
return X86::AND64ri8;
return X86::AND64ri32;
}
if (isInt<8>(Imm))
return X86::AND32ri8;
return X86::AND32ri;
}
static unsigned getLEArOpcode(unsigned IsLP64) {
return IsLP64 ? X86::LEA64r : X86::LEA32r;
}
/// findDeadCallerSavedReg - Return a caller-saved register that isn't live
/// when it reaches the "return" instruction. We can then pop a stack object
/// to this register without worry about clobbering it.
static unsigned findDeadCallerSavedReg(MachineBasicBlock &MBB,
MachineBasicBlock::iterator &MBBI,
const TargetRegisterInfo &TRI,
bool Is64Bit) {
const MachineFunction *MF = MBB.getParent();
const Function *F = MF->getFunction();
if (!F || MF->getMMI().callsEHReturn())
return 0;
static const uint16_t CallerSavedRegs32Bit[] = {
X86::EAX, X86::EDX, X86::ECX, 0
};
static const uint16_t CallerSavedRegs64Bit[] = {
X86::RAX, X86::RDX, X86::RCX, X86::RSI, X86::RDI,
X86::R8, X86::R9, X86::R10, X86::R11, 0
};
unsigned Opc = MBBI->getOpcode();
switch (Opc) {
default: return 0;
case X86::RETL:
case X86::RETQ:
case X86::RETIL:
case X86::RETIQ:
case X86::TCRETURNdi:
case X86::TCRETURNri:
case X86::TCRETURNmi:
case X86::TCRETURNdi64:
case X86::TCRETURNri64:
case X86::TCRETURNmi64:
case X86::EH_RETURN:
case X86::EH_RETURN64: {
SmallSet<uint16_t, 8> Uses;
for (unsigned i = 0, e = MBBI->getNumOperands(); i != e; ++i) {
MachineOperand &MO = MBBI->getOperand(i);
if (!MO.isReg() || MO.isDef())
continue;
unsigned Reg = MO.getReg();
if (!Reg)
continue;
for (MCRegAliasIterator AI(Reg, &TRI, true); AI.isValid(); ++AI)
Uses.insert(*AI);
}
const uint16_t *CS = Is64Bit ? CallerSavedRegs64Bit : CallerSavedRegs32Bit;
for (; *CS; ++CS)
if (!Uses.count(*CS))
return *CS;
}
}
return 0;
}
static bool isEAXLiveIn(MachineFunction &MF) {
for (MachineRegisterInfo::livein_iterator II = MF.getRegInfo().livein_begin(),
EE = MF.getRegInfo().livein_end(); II != EE; ++II) {
unsigned Reg = II->first;
if (Reg == X86::RAX || Reg == X86::EAX || Reg == X86::AX ||
Reg == X86::AH || Reg == X86::AL)
return true;
}
return false;
}
/// emitSPUpdate - Emit a series of instructions to increment / decrement the
/// stack pointer by a constant value.
static
void emitSPUpdate(MachineBasicBlock &MBB, MachineBasicBlock::iterator &MBBI,
unsigned StackPtr, int64_t NumBytes,
bool Is64BitTarget, bool Is64BitStackPtr, bool UseLEA,
const TargetInstrInfo &TII, const TargetRegisterInfo &TRI) {
bool isSub = NumBytes < 0;
uint64_t Offset = isSub ? -NumBytes : NumBytes;
unsigned Opc;
if (UseLEA)
Opc = getLEArOpcode(Is64BitStackPtr);
else
Opc = isSub
? getSUBriOpcode(Is64BitStackPtr, Offset)
: getADDriOpcode(Is64BitStackPtr, Offset);
uint64_t Chunk = (1LL << 31) - 1;
DebugLoc DL = MBB.findDebugLoc(MBBI);
while (Offset) {
if (Offset > Chunk) {
// Rather than emit a long series of instructions for large offsets,
// load the offset into a register and do one sub/add
unsigned Reg = 0;
if (isSub && !isEAXLiveIn(*MBB.getParent()))
Reg = (unsigned)(Is64BitTarget ? X86::RAX : X86::EAX);
else
Reg = findDeadCallerSavedReg(MBB, MBBI, TRI, Is64BitTarget);
if (Reg) {
Opc = Is64BitTarget ? X86::MOV64ri : X86::MOV32ri;
BuildMI(MBB, MBBI, DL, TII.get(Opc), Reg)
.addImm(Offset);
Opc = isSub
? getSUBrrOpcode(Is64BitTarget)
: getADDrrOpcode(Is64BitTarget);
MachineInstr *MI = BuildMI(MBB, MBBI, DL, TII.get(Opc), StackPtr)
.addReg(StackPtr)
.addReg(Reg);
MI->getOperand(3).setIsDead(); // The EFLAGS implicit def is dead.
Offset = 0;
continue;
}
}
uint64_t ThisVal = std::min(Offset, Chunk);
if (ThisVal == (Is64BitTarget ? 8 : 4)) {
// Use push / pop instead.
unsigned Reg = isSub
? (unsigned)(Is64BitTarget ? X86::RAX : X86::EAX)
: findDeadCallerSavedReg(MBB, MBBI, TRI, Is64BitTarget);
if (Reg) {
Opc = isSub
? (Is64BitTarget ? X86::PUSH64r : X86::PUSH32r)
: (Is64BitTarget ? X86::POP64r : X86::POP32r);
MachineInstr *MI = BuildMI(MBB, MBBI, DL, TII.get(Opc))
.addReg(Reg, getDefRegState(!isSub) | getUndefRegState(isSub));
if (isSub)
MI->setFlag(MachineInstr::FrameSetup);
Offset -= ThisVal;
continue;
}
}
MachineInstr *MI = nullptr;
if (UseLEA) {
MI = addRegOffset(BuildMI(MBB, MBBI, DL, TII.get(Opc), StackPtr),
StackPtr, false, isSub ? -ThisVal : ThisVal);
} else {
MI = BuildMI(MBB, MBBI, DL, TII.get(Opc), StackPtr)
.addReg(StackPtr)
.addImm(ThisVal);
MI->getOperand(3).setIsDead(); // The EFLAGS implicit def is dead.
}
if (isSub)
MI->setFlag(MachineInstr::FrameSetup);
Offset -= ThisVal;
}
}
/// mergeSPUpdatesUp - Merge two stack-manipulating instructions upper iterator.
static
void mergeSPUpdatesUp(MachineBasicBlock &MBB, MachineBasicBlock::iterator &MBBI,
unsigned StackPtr, uint64_t *NumBytes = nullptr) {
if (MBBI == MBB.begin()) return;
MachineBasicBlock::iterator PI = std::prev(MBBI);
unsigned Opc = PI->getOpcode();
if ((Opc == X86::ADD64ri32 || Opc == X86::ADD64ri8 ||
Opc == X86::ADD32ri || Opc == X86::ADD32ri8 ||
Opc == X86::LEA32r || Opc == X86::LEA64_32r) &&
PI->getOperand(0).getReg() == StackPtr) {
if (NumBytes)
*NumBytes += PI->getOperand(2).getImm();
MBB.erase(PI);
} else if ((Opc == X86::SUB64ri32 || Opc == X86::SUB64ri8 ||
Opc == X86::SUB32ri || Opc == X86::SUB32ri8) &&
PI->getOperand(0).getReg() == StackPtr) {
if (NumBytes)
*NumBytes -= PI->getOperand(2).getImm();
MBB.erase(PI);
}
}
/// mergeSPUpdates - Checks the instruction before/after the passed
/// instruction. If it is an ADD/SUB/LEA instruction it is deleted argument and
/// the stack adjustment is returned as a positive value for ADD/LEA and a
/// negative for SUB.
static int mergeSPUpdates(MachineBasicBlock &MBB,
MachineBasicBlock::iterator &MBBI, unsigned StackPtr,
bool doMergeWithPrevious) {
if ((doMergeWithPrevious && MBBI == MBB.begin()) ||
(!doMergeWithPrevious && MBBI == MBB.end()))
return 0;
MachineBasicBlock::iterator PI = doMergeWithPrevious ? std::prev(MBBI) : MBBI;
MachineBasicBlock::iterator NI = doMergeWithPrevious ? nullptr
: std::next(MBBI);
unsigned Opc = PI->getOpcode();
int Offset = 0;
if ((Opc == X86::ADD64ri32 || Opc == X86::ADD64ri8 ||
Opc == X86::ADD32ri || Opc == X86::ADD32ri8 ||
Opc == X86::LEA32r || Opc == X86::LEA64_32r) &&
PI->getOperand(0).getReg() == StackPtr){
Offset += PI->getOperand(2).getImm();
MBB.erase(PI);
if (!doMergeWithPrevious) MBBI = NI;
} else if ((Opc == X86::SUB64ri32 || Opc == X86::SUB64ri8 ||
Opc == X86::SUB32ri || Opc == X86::SUB32ri8) &&
PI->getOperand(0).getReg() == StackPtr) {
Offset -= PI->getOperand(2).getImm();
MBB.erase(PI);
if (!doMergeWithPrevious) MBBI = NI;
}
return Offset;
}
void
X86FrameLowering::emitCalleeSavedFrameMoves(MachineBasicBlock &MBB,
MachineBasicBlock::iterator MBBI,
DebugLoc DL) const {
MachineFunction &MF = *MBB.getParent();
MachineFrameInfo *MFI = MF.getFrameInfo();
MachineModuleInfo &MMI = MF.getMMI();
const MCRegisterInfo *MRI = MMI.getContext().getRegisterInfo();
const TargetInstrInfo &TII = *MF.getSubtarget().getInstrInfo();
// Add callee saved registers to move list.
const std::vector<CalleeSavedInfo> &CSI = MFI->getCalleeSavedInfo();
if (CSI.empty()) return;
// Calculate offsets.
for (std::vector<CalleeSavedInfo>::const_iterator
I = CSI.begin(), E = CSI.end(); I != E; ++I) {
int64_t Offset = MFI->getObjectOffset(I->getFrameIdx());
unsigned Reg = I->getReg();
unsigned DwarfReg = MRI->getDwarfRegNum(Reg, true);
unsigned CFIIndex =
MMI.addFrameInst(MCCFIInstruction::createOffset(nullptr, DwarfReg,
Offset));
BuildMI(MBB, MBBI, DL, TII.get(TargetOpcode::CFI_INSTRUCTION))
.addCFIIndex(CFIIndex);
}
}
/// usesTheStack - This function checks if any of the users of EFLAGS
/// copies the EFLAGS. We know that the code that lowers COPY of EFLAGS has
/// to use the stack, and if we don't adjust the stack we clobber the first
/// frame index.
/// See X86InstrInfo::copyPhysReg.
static bool usesTheStack(const MachineFunction &MF) {
const MachineRegisterInfo &MRI = MF.getRegInfo();
for (MachineRegisterInfo::reg_instr_iterator
ri = MRI.reg_instr_begin(X86::EFLAGS), re = MRI.reg_instr_end();
ri != re; ++ri)
if (ri->isCopy())
return true;
return false;
}
void X86FrameLowering::emitStackProbeCall(MachineFunction &MF,
MachineBasicBlock &MBB,
MachineBasicBlock::iterator MBBI,
DebugLoc DL) {
const X86Subtarget &STI = MF.getSubtarget<X86Subtarget>();
const TargetInstrInfo &TII = *STI.getInstrInfo();
bool Is64Bit = STI.is64Bit();
bool IsLargeCodeModel = MF.getTarget().getCodeModel() == CodeModel::Large;
unsigned CallOp;
if (Is64Bit)
CallOp = IsLargeCodeModel ? X86::CALL64r : X86::CALL64pcrel32;
else
CallOp = X86::CALLpcrel32;
const char *Symbol;
if (Is64Bit) {
if (STI.isTargetCygMing()) {
Symbol = "___chkstk_ms";
} else {
Symbol = "__chkstk";
}
} else if (STI.isTargetCygMing())
Symbol = "_alloca";
else
Symbol = "_chkstk";
MachineInstrBuilder CI;
// All current stack probes take AX and SP as input, clobber flags, and
// preserve all registers. x86_64 probes leave RSP unmodified.
if (Is64Bit && MF.getTarget().getCodeModel() == CodeModel::Large) {
// For the large code model, we have to call through a register. Use R11,
// as it is scratch in all supported calling conventions.
BuildMI(MBB, MBBI, DL, TII.get(X86::MOV64ri), X86::R11)
.addExternalSymbol(Symbol);
CI = BuildMI(MBB, MBBI, DL, TII.get(CallOp)).addReg(X86::R11);
} else {
CI = BuildMI(MBB, MBBI, DL, TII.get(CallOp)).addExternalSymbol(Symbol);
}
unsigned AX = Is64Bit ? X86::RAX : X86::EAX;
unsigned SP = Is64Bit ? X86::RSP : X86::ESP;
CI.addReg(AX, RegState::Implicit)
.addReg(SP, RegState::Implicit)
.addReg(AX, RegState::Define | RegState::Implicit)
.addReg(SP, RegState::Define | RegState::Implicit)
.addReg(X86::EFLAGS, RegState::Define | RegState::Implicit);
if (Is64Bit) {
// MSVC x64's __chkstk and cygwin/mingw's ___chkstk_ms do not adjust %rsp
// themselves. It also does not clobber %rax so we can reuse it when
// adjusting %rsp.
BuildMI(MBB, MBBI, DL, TII.get(X86::SUB64rr), X86::RSP)
.addReg(X86::RSP)
.addReg(X86::RAX);
}
}
static unsigned calculateSetFPREG(uint64_t SPAdjust) {
// Win64 ABI has a less restrictive limitation of 240; 128 works equally well
// and might require smaller successive adjustments.
const uint64_t Win64MaxSEHOffset = 128;
uint64_t SEHFrameOffset = std::min(SPAdjust, Win64MaxSEHOffset);
// Win64 ABI requires 16-byte alignment for the UWOP_SET_FPREG opcode.
return SEHFrameOffset & -16;
}
// If we're forcing a stack realignment we can't rely on just the frame
// info, we need to know the ABI stack alignment as well in case we
// have a call out. Otherwise just make sure we have some alignment - we'll
// go with the minimum SlotSize.
static uint64_t calculateMaxStackAlign(const MachineFunction &MF) {
const MachineFrameInfo *MFI = MF.getFrameInfo();
uint64_t MaxAlign = MFI->getMaxAlignment(); // Desired stack alignment.
const X86Subtarget &STI = MF.getSubtarget<X86Subtarget>();
const X86RegisterInfo *RegInfo = STI.getRegisterInfo();
unsigned SlotSize = RegInfo->getSlotSize();
unsigned StackAlign = STI.getFrameLowering()->getStackAlignment();
if (ForceStackAlign) {
if (MFI->hasCalls())
MaxAlign = (StackAlign > MaxAlign) ? StackAlign : MaxAlign;
else if (MaxAlign < SlotSize)
MaxAlign = SlotSize;
}
return MaxAlign;
}
/// emitPrologue - Push callee-saved registers onto the stack, which
/// automatically adjust the stack pointer. Adjust the stack pointer to allocate
/// space for local variables. Also emit labels used by the exception handler to
/// generate the exception handling frames.
/*
Here's a gist of what gets emitted:
; Establish frame pointer, if needed
[if needs FP]
push %rbp
.cfi_def_cfa_offset 16
.cfi_offset %rbp, -16
.seh_pushreg %rpb
mov %rsp, %rbp
.cfi_def_cfa_register %rbp
; Spill general-purpose registers
[for all callee-saved GPRs]
pushq %<reg>
[if not needs FP]
.cfi_def_cfa_offset (offset from RETADDR)
.seh_pushreg %<reg>
; If the required stack alignment > default stack alignment
; rsp needs to be re-aligned. This creates a "re-alignment gap"
; of unknown size in the stack frame.
[if stack needs re-alignment]
and $MASK, %rsp
; Allocate space for locals
[if target is Windows and allocated space > 4096 bytes]
; Windows needs special care for allocations larger
; than one page.
mov $NNN, %rax
call ___chkstk_ms/___chkstk
sub %rax, %rsp
[else]
sub $NNN, %rsp
[if needs FP]
.seh_stackalloc (size of XMM spill slots)
.seh_setframe %rbp, SEHFrameOffset ; = size of all spill slots
[else]
.seh_stackalloc NNN
; Spill XMMs
; Note, that while only Windows 64 ABI specifies XMMs as callee-preserved,
; they may get spilled on any platform, if the current function
; calls @llvm.eh.unwind.init
[if needs FP]
[for all callee-saved XMM registers]
movaps %<xmm reg>, -MMM(%rbp)
[for all callee-saved XMM registers]
.seh_savexmm %<xmm reg>, (-MMM + SEHFrameOffset)
; i.e. the offset relative to (%rbp - SEHFrameOffset)
[else]
[for all callee-saved XMM registers]
movaps %<xmm reg>, KKK(%rsp)
[for all callee-saved XMM registers]
.seh_savexmm %<xmm reg>, KKK
.seh_endprologue
[if needs base pointer]
mov %rsp, %rbx
[if needs to restore base pointer]
mov %rsp, -MMM(%rbp)
; Emit CFI info
[if needs FP]
[for all callee-saved registers]
.cfi_offset %<reg>, (offset from %rbp)
[else]
.cfi_def_cfa_offset (offset from RETADDR)
[for all callee-saved registers]
.cfi_offset %<reg>, (offset from %rsp)
Notes:
- .seh directives are emitted only for Windows 64 ABI
- .cfi directives are emitted for all other ABIs
- for 32-bit code, substitute %e?? registers for %r??
*/
void X86FrameLowering::emitPrologue(MachineFunction &MF,
MachineBasicBlock &MBB) const {
assert(&MF.front() == &MBB && "Shrink-wrapping not yet supported");
MachineBasicBlock::iterator MBBI = MBB.begin();
MachineFrameInfo *MFI = MF.getFrameInfo();
const Function *Fn = MF.getFunction();
const X86Subtarget &STI = MF.getSubtarget<X86Subtarget>();
const X86RegisterInfo *RegInfo = STI.getRegisterInfo();
const TargetInstrInfo &TII = *STI.getInstrInfo();
MachineModuleInfo &MMI = MF.getMMI();
X86MachineFunctionInfo *X86FI = MF.getInfo<X86MachineFunctionInfo>();
uint64_t MaxAlign = calculateMaxStackAlign(MF); // Desired stack alignment.
uint64_t StackSize = MFI->getStackSize(); // Number of bytes to allocate.
bool HasFP = hasFP(MF);
bool Is64Bit = STI.is64Bit();
// standard x86_64 and NaCl use 64-bit frame/stack pointers, x32 - 32-bit.
const bool Uses64BitFramePtr = STI.isTarget64BitLP64() || STI.isTargetNaCl64();
bool IsWin64 = STI.isCallingConvWin64(Fn->getCallingConv());
// Not necessarily synonymous with IsWin64.
bool IsWinEH = MF.getTarget().getMCAsmInfo()->usesWindowsCFI();
bool NeedsWinEH = IsWinEH && Fn->needsUnwindTableEntry();
bool NeedsDwarfCFI =
!IsWinEH && (MMI.hasDebugInfo() || Fn->needsUnwindTableEntry());
bool UseLEA = STI.useLeaForSP();
unsigned SlotSize = RegInfo->getSlotSize();
unsigned FramePtr = RegInfo->getFrameRegister(MF);
const unsigned MachineFramePtr =
STI.isTarget64BitILP32()
? getX86SubSuperRegister(FramePtr, MVT::i64, false)
: FramePtr;
unsigned StackPtr = RegInfo->getStackRegister();
unsigned BasePtr = RegInfo->getBaseRegister();
DebugLoc DL;
// Add RETADDR move area to callee saved frame size.
int TailCallReturnAddrDelta = X86FI->getTCReturnAddrDelta();
if (TailCallReturnAddrDelta && IsWinEH)
report_fatal_error("Can't handle guaranteed tail call under win64 yet");
if (TailCallReturnAddrDelta < 0)
X86FI->setCalleeSavedFrameSize(
X86FI->getCalleeSavedFrameSize() - TailCallReturnAddrDelta);
bool UseStackProbe = (STI.isOSWindows() && !STI.isTargetMachO());
// The default stack probe size is 4096 if the function has no stackprobesize
// attribute.
unsigned StackProbeSize = 4096;
if (Fn->hasFnAttribute("stack-probe-size"))
Fn->getFnAttribute("stack-probe-size")
.getValueAsString()
.getAsInteger(0, StackProbeSize);
// If this is x86-64 and the Red Zone is not disabled, if we are a leaf
// function, and use up to 128 bytes of stack space, don't have a frame
// pointer, calls, or dynamic alloca then we do not need to adjust the
// stack pointer (we fit in the Red Zone). We also check that we don't
// push and pop from the stack.
if (Is64Bit && !Fn->hasFnAttribute(Attribute::NoRedZone) &&
!RegInfo->needsStackRealignment(MF) &&
!MFI->hasVarSizedObjects() && // No dynamic alloca.
!MFI->adjustsStack() && // No calls.
!IsWin64 && // Win64 has no Red Zone
!usesTheStack(MF) && // Don't push and pop.
!MF.shouldSplitStack()) { // Regular stack
uint64_t MinSize = X86FI->getCalleeSavedFrameSize();
if (HasFP) MinSize += SlotSize;
StackSize = std::max(MinSize, StackSize > 128 ? StackSize - 128 : 0);
MFI->setStackSize(StackSize);
}
// Insert stack pointer adjustment for later moving of return addr. Only
// applies to tail call optimized functions where the callee argument stack
// size is bigger than the callers.
if (TailCallReturnAddrDelta < 0) {
MachineInstr *MI =
BuildMI(MBB, MBBI, DL,
TII.get(getSUBriOpcode(Uses64BitFramePtr, -TailCallReturnAddrDelta)),
StackPtr)
.addReg(StackPtr)
.addImm(-TailCallReturnAddrDelta)
.setMIFlag(MachineInstr::FrameSetup);
MI->getOperand(3).setIsDead(); // The EFLAGS implicit def is dead.
}
// Mapping for machine moves:
//
// DST: VirtualFP AND
// SRC: VirtualFP => DW_CFA_def_cfa_offset
// ELSE => DW_CFA_def_cfa
//
// SRC: VirtualFP AND
// DST: Register => DW_CFA_def_cfa_register
//
// ELSE
// OFFSET < 0 => DW_CFA_offset_extended_sf
// REG < 64 => DW_CFA_offset + Reg
// ELSE => DW_CFA_offset_extended
uint64_t NumBytes = 0;
int stackGrowth = -SlotSize;
if (HasFP) {
// Calculate required stack adjustment.
uint64_t FrameSize = StackSize - SlotSize;
// If required, include space for extra hidden slot for stashing base pointer.
if (X86FI->getRestoreBasePointer())
FrameSize += SlotSize;
NumBytes = FrameSize - X86FI->getCalleeSavedFrameSize();
// Callee-saved registers are pushed on stack before the stack is realigned.
if (RegInfo->needsStackRealignment(MF) && !IsWinEH)
NumBytes = RoundUpToAlignment(NumBytes, MaxAlign);
// Get the offset of the stack slot for the EBP register, which is
// guaranteed to be the last slot by processFunctionBeforeFrameFinalized.
// Update the frame offset adjustment.
MFI->setOffsetAdjustment(-NumBytes);
// Save EBP/RBP into the appropriate stack slot.
BuildMI(MBB, MBBI, DL, TII.get(Is64Bit ? X86::PUSH64r : X86::PUSH32r))
.addReg(MachineFramePtr, RegState::Kill)
.setMIFlag(MachineInstr::FrameSetup);
if (NeedsDwarfCFI) {
// Mark the place where EBP/RBP was saved.
// Define the current CFA rule to use the provided offset.
assert(StackSize);
unsigned CFIIndex = MMI.addFrameInst(
MCCFIInstruction::createDefCfaOffset(nullptr, 2 * stackGrowth));
BuildMI(MBB, MBBI, DL, TII.get(TargetOpcode::CFI_INSTRUCTION))
.addCFIIndex(CFIIndex);
// Change the rule for the FramePtr to be an "offset" rule.
unsigned DwarfFramePtr = RegInfo->getDwarfRegNum(MachineFramePtr, true);
CFIIndex = MMI.addFrameInst(
MCCFIInstruction::createOffset(nullptr,
DwarfFramePtr, 2 * stackGrowth));
BuildMI(MBB, MBBI, DL, TII.get(TargetOpcode::CFI_INSTRUCTION))
.addCFIIndex(CFIIndex);
}
if (NeedsWinEH) {
BuildMI(MBB, MBBI, DL, TII.get(X86::SEH_PushReg))
.addImm(FramePtr)
.setMIFlag(MachineInstr::FrameSetup);
}
if (!IsWinEH) {
// Update EBP with the new base value.
BuildMI(MBB, MBBI, DL,
TII.get(Uses64BitFramePtr ? X86::MOV64rr : X86::MOV32rr),
FramePtr)
.addReg(StackPtr)
.setMIFlag(MachineInstr::FrameSetup);
}
if (NeedsDwarfCFI) {
// Mark effective beginning of when frame pointer becomes valid.
// Define the current CFA to use the EBP/RBP register.
unsigned DwarfFramePtr = RegInfo->getDwarfRegNum(MachineFramePtr, true);
unsigned CFIIndex = MMI.addFrameInst(
MCCFIInstruction::createDefCfaRegister(nullptr, DwarfFramePtr));
BuildMI(MBB, MBBI, DL, TII.get(TargetOpcode::CFI_INSTRUCTION))
.addCFIIndex(CFIIndex);
}
// Mark the FramePtr as live-in in every block.
for (MachineFunction::iterator I = MF.begin(), E = MF.end(); I != E; ++I)
I->addLiveIn(MachineFramePtr);
} else {
NumBytes = StackSize - X86FI->getCalleeSavedFrameSize();
}
// Skip the callee-saved push instructions.
bool PushedRegs = false;
int StackOffset = 2 * stackGrowth;
while (MBBI != MBB.end() &&
(MBBI->getOpcode() == X86::PUSH32r ||
MBBI->getOpcode() == X86::PUSH64r)) {
PushedRegs = true;
unsigned Reg = MBBI->getOperand(0).getReg();
++MBBI;
if (!HasFP && NeedsDwarfCFI) {
// Mark callee-saved push instruction.
// Define the current CFA rule to use the provided offset.
assert(StackSize);
unsigned CFIIndex = MMI.addFrameInst(
MCCFIInstruction::createDefCfaOffset(nullptr, StackOffset));
BuildMI(MBB, MBBI, DL, TII.get(TargetOpcode::CFI_INSTRUCTION))
.addCFIIndex(CFIIndex);
StackOffset += stackGrowth;
}
if (NeedsWinEH) {
BuildMI(MBB, MBBI, DL, TII.get(X86::SEH_PushReg)).addImm(Reg).setMIFlag(
MachineInstr::FrameSetup);
}
}
// Realign stack after we pushed callee-saved registers (so that we'll be
// able to calculate their offsets from the frame pointer).
// Don't do this for Win64, it needs to realign the stack after the prologue.
if (!IsWinEH && RegInfo->needsStackRealignment(MF)) {
assert(HasFP && "There should be a frame pointer if stack is realigned.");
uint64_t Val = -MaxAlign;
MachineInstr *MI =
BuildMI(MBB, MBBI, DL, TII.get(getANDriOpcode(Uses64BitFramePtr, Val)),
StackPtr)
.addReg(StackPtr)
.addImm(Val)
.setMIFlag(MachineInstr::FrameSetup);
// The EFLAGS implicit def is dead.
MI->getOperand(3).setIsDead();
}
// If there is an SUB32ri of ESP immediately before this instruction, merge
// the two. This can be the case when tail call elimination is enabled and
// the callee has more arguments then the caller.
NumBytes -= mergeSPUpdates(MBB, MBBI, StackPtr, true);
// Adjust stack pointer: ESP -= numbytes.
// Windows and cygwin/mingw require a prologue helper routine when allocating
// more than 4K bytes on the stack. Windows uses __chkstk and cygwin/mingw
// uses __alloca. __alloca and the 32-bit version of __chkstk will probe the
// stack and adjust the stack pointer in one go. The 64-bit version of
// __chkstk is only responsible for probing the stack. The 64-bit prologue is
// responsible for adjusting the stack pointer. Touching the stack at 4K
// increments is necessary to ensure that the guard pages used by the OS
// virtual memory manager are allocated in correct sequence.
uint64_t AlignedNumBytes = NumBytes;
if (IsWinEH && RegInfo->needsStackRealignment(MF))
AlignedNumBytes = RoundUpToAlignment(AlignedNumBytes, MaxAlign);
if (AlignedNumBytes >= StackProbeSize && UseStackProbe) {
// Check whether EAX is livein for this function.
bool isEAXAlive = isEAXLiveIn(MF);
if (isEAXAlive) {
// Sanity check that EAX is not livein for this function.
// It should not be, so throw an assert.
assert(!Is64Bit && "EAX is livein in x64 case!");
// Save EAX
BuildMI(MBB, MBBI, DL, TII.get(X86::PUSH32r))
.addReg(X86::EAX, RegState::Kill)
.setMIFlag(MachineInstr::FrameSetup);
}
if (Is64Bit) {
// Handle the 64-bit Windows ABI case where we need to call __chkstk.
// Function prologue is responsible for adjusting the stack pointer.
if (isUInt<32>(NumBytes)) {
BuildMI(MBB, MBBI, DL, TII.get(X86::MOV32ri), X86::EAX)
.addImm(NumBytes)
.setMIFlag(MachineInstr::FrameSetup);
} else if (isInt<32>(NumBytes)) {
BuildMI(MBB, MBBI, DL, TII.get(X86::MOV64ri32), X86::RAX)
.addImm(NumBytes)
.setMIFlag(MachineInstr::FrameSetup);
} else {
BuildMI(MBB, MBBI, DL, TII.get(X86::MOV64ri), X86::RAX)
.addImm(NumBytes)
.setMIFlag(MachineInstr::FrameSetup);
}
} else {
// Allocate NumBytes-4 bytes on stack in case of isEAXAlive.
// We'll also use 4 already allocated bytes for EAX.
BuildMI(MBB, MBBI, DL, TII.get(X86::MOV32ri), X86::EAX)
.addImm(isEAXAlive ? NumBytes - 4 : NumBytes)
.setMIFlag(MachineInstr::FrameSetup);
}
// Save a pointer to the MI where we set AX.
MachineBasicBlock::iterator SetRAX = MBBI;
--SetRAX;
// Call __chkstk, __chkstk_ms, or __alloca.
emitStackProbeCall(MF, MBB, MBBI, DL);
// Apply the frame setup flag to all inserted instrs.
for (; SetRAX != MBBI; ++SetRAX)
SetRAX->setFlag(MachineInstr::FrameSetup);
if (isEAXAlive) {
// Restore EAX
MachineInstr *MI = addRegOffset(BuildMI(MF, DL, TII.get(X86::MOV32rm),
X86::EAX),
StackPtr, false, NumBytes - 4);
MI->setFlag(MachineInstr::FrameSetup);
MBB.insert(MBBI, MI);
}
} else if (NumBytes) {
emitSPUpdate(MBB, MBBI, StackPtr, -(int64_t)NumBytes, Is64Bit, Uses64BitFramePtr,
UseLEA, TII, *RegInfo);
}
if (NeedsWinEH && NumBytes)
BuildMI(MBB, MBBI, DL, TII.get(X86::SEH_StackAlloc))
.addImm(NumBytes)
.setMIFlag(MachineInstr::FrameSetup);
int SEHFrameOffset = 0;
if (IsWinEH && HasFP) {
SEHFrameOffset = calculateSetFPREG(NumBytes);
if (SEHFrameOffset)
addRegOffset(BuildMI(MBB, MBBI, DL, TII.get(X86::LEA64r), FramePtr),
StackPtr, false, SEHFrameOffset);
else
BuildMI(MBB, MBBI, DL, TII.get(X86::MOV64rr), FramePtr).addReg(StackPtr);
if (NeedsWinEH)
BuildMI(MBB, MBBI, DL, TII.get(X86::SEH_SetFrame))
.addImm(FramePtr)
.addImm(SEHFrameOffset)
.setMIFlag(MachineInstr::FrameSetup);
}
while (MBBI != MBB.end() && MBBI->getFlag(MachineInstr::FrameSetup)) {
const MachineInstr *FrameInstr = &*MBBI;
++MBBI;
if (NeedsWinEH) {
int FI;
if (unsigned Reg = TII.isStoreToStackSlot(FrameInstr, FI)) {
if (X86::FR64RegClass.contains(Reg)) {
int Offset = getFrameIndexOffset(MF, FI);
Offset += SEHFrameOffset;
BuildMI(MBB, MBBI, DL, TII.get(X86::SEH_SaveXMM))
.addImm(Reg)
.addImm(Offset)
.setMIFlag(MachineInstr::FrameSetup);
}
}
}
}
if (NeedsWinEH)
BuildMI(MBB, MBBI, DL, TII.get(X86::SEH_EndPrologue))
.setMIFlag(MachineInstr::FrameSetup);
// Realign stack after we spilled callee-saved registers (so that we'll be
// able to calculate their offsets from the frame pointer).
// Win64 requires aligning the stack after the prologue.
if (IsWinEH && RegInfo->needsStackRealignment(MF)) {
assert(HasFP && "There should be a frame pointer if stack is realigned.");
uint64_t Val = -MaxAlign;
MachineInstr *MI =
BuildMI(MBB, MBBI, DL, TII.get(getANDriOpcode(Uses64BitFramePtr, Val)),
StackPtr)
.addReg(StackPtr)
.addImm(Val)
.setMIFlag(MachineInstr::FrameSetup);
// The EFLAGS implicit def is dead.
MI->getOperand(3).setIsDead();
}
// If we need a base pointer, set it up here. It's whatever the value
// of the stack pointer is at this point. Any variable size objects
// will be allocated after this, so we can still use the base pointer
// to reference locals.
if (RegInfo->hasBasePointer(MF)) {
// Update the base pointer with the current stack pointer.
unsigned Opc = Uses64BitFramePtr ? X86::MOV64rr : X86::MOV32rr;
BuildMI(MBB, MBBI, DL, TII.get(Opc), BasePtr)
.addReg(StackPtr)
.setMIFlag(MachineInstr::FrameSetup);
if (X86FI->getRestoreBasePointer()) {
// Stash value of base pointer. Saving RSP instead of EBP shortens dependence chain.
unsigned Opm = Uses64BitFramePtr ? X86::MOV64mr : X86::MOV32mr;
addRegOffset(BuildMI(MBB, MBBI, DL, TII.get(Opm)),
FramePtr, true, X86FI->getRestoreBasePointerOffset())
.addReg(StackPtr)
.setMIFlag(MachineInstr::FrameSetup);
}
}
if (((!HasFP && NumBytes) || PushedRegs) && NeedsDwarfCFI) {
// Mark end of stack pointer adjustment.
if (!HasFP && NumBytes) {
// Define the current CFA rule to use the provided offset.
assert(StackSize);
unsigned CFIIndex = MMI.addFrameInst(
MCCFIInstruction::createDefCfaOffset(nullptr,
-StackSize + stackGrowth));
BuildMI(MBB, MBBI, DL, TII.get(TargetOpcode::CFI_INSTRUCTION))
.addCFIIndex(CFIIndex);
}
// Emit DWARF info specifying the offsets of the callee-saved registers.
if (PushedRegs)
emitCalleeSavedFrameMoves(MBB, MBBI, DL);
}
}
void X86FrameLowering::emitEpilogue(MachineFunction &MF,
MachineBasicBlock &MBB) const {
const MachineFrameInfo *MFI = MF.getFrameInfo();
X86MachineFunctionInfo *X86FI = MF.getInfo<X86MachineFunctionInfo>();
const X86Subtarget &STI = MF.getSubtarget<X86Subtarget>();
const X86RegisterInfo *RegInfo = STI.getRegisterInfo();
const TargetInstrInfo &TII = *STI.getInstrInfo();
MachineBasicBlock::iterator MBBI = MBB.getLastNonDebugInstr();
assert(MBBI != MBB.end() && "Returning block has no instructions");
unsigned RetOpcode = MBBI->getOpcode();
DebugLoc DL = MBBI->getDebugLoc();
bool Is64Bit = STI.is64Bit();
// standard x86_64 and NaCl use 64-bit frame/stack pointers, x32 - 32-bit.
const bool Uses64BitFramePtr = STI.isTarget64BitLP64() || STI.isTargetNaCl64();
bool HasFP = hasFP(MF);
const bool Is64BitILP32 = STI.isTarget64BitILP32();
unsigned SlotSize = RegInfo->getSlotSize();
unsigned FramePtr = RegInfo->getFrameRegister(MF);
unsigned MachineFramePtr =
Is64BitILP32 ? getX86SubSuperRegister(FramePtr, MVT::i64, false)
: FramePtr;
unsigned StackPtr = RegInfo->getStackRegister();
bool IsWinEH = MF.getTarget().getMCAsmInfo()->usesWindowsCFI();
bool NeedsWinEH = IsWinEH && MF.getFunction()->needsUnwindTableEntry();
bool UseLEAForSP = false;
// We can't use LEA instructions for adjusting the stack pointer if this is a
// leaf function in the Win64 ABI. Only ADD instructions may be used to
// deallocate the stack.
if (STI.useLeaForSP()) {
if (!IsWinEH) {
// We *aren't* using the Win64 ABI which means we are free to use LEA.
UseLEAForSP = true;
} else if (HasFP) {
// We *have* a frame pointer which means we are permitted to use LEA.
UseLEAForSP = true;
}
}
switch (RetOpcode) {
default:
llvm_unreachable("Can only insert epilogue into returning blocks");
case X86::RETQ:
case X86::RETL:
case X86::RETIL:
case X86::RETIQ:
case X86::TCRETURNdi:
case X86::TCRETURNri:
case X86::TCRETURNmi:
case X86::TCRETURNdi64:
case X86::TCRETURNri64:
case X86::TCRETURNmi64:
case X86::EH_RETURN:
case X86::EH_RETURN64:
break; // These are ok
}
// Get the number of bytes to allocate from the FrameInfo.
uint64_t StackSize = MFI->getStackSize();
uint64_t MaxAlign = calculateMaxStackAlign(MF);
unsigned CSSize = X86FI->getCalleeSavedFrameSize();
uint64_t NumBytes = 0;
if (hasFP(MF)) {
// Calculate required stack adjustment.
uint64_t FrameSize = StackSize - SlotSize;
NumBytes = FrameSize - CSSize;
// Callee-saved registers were pushed on stack before the stack was
// realigned.
if (RegInfo->needsStackRealignment(MF) && !IsWinEH)
NumBytes = RoundUpToAlignment(FrameSize, MaxAlign);
// Pop EBP.
BuildMI(MBB, MBBI, DL,
TII.get(Is64Bit ? X86::POP64r : X86::POP32r), MachineFramePtr);
} else {
NumBytes = StackSize - CSSize;
}
uint64_t SEHStackAllocAmt = NumBytes;
// Skip the callee-saved pop instructions.
while (MBBI != MBB.begin()) {
MachineBasicBlock::iterator PI = std::prev(MBBI);
unsigned Opc = PI->getOpcode();
if (Opc != X86::POP32r && Opc != X86::POP64r && Opc != X86::DBG_VALUE &&
!PI->isTerminator())
break;
--MBBI;
}
MachineBasicBlock::iterator FirstCSPop = MBBI;
DL = MBBI->getDebugLoc();
// If there is an ADD32ri or SUB32ri of ESP immediately before this
// instruction, merge the two instructions.
if (NumBytes || MFI->hasVarSizedObjects())
mergeSPUpdatesUp(MBB, MBBI, StackPtr, &NumBytes);
// If dynamic alloca is used, then reset esp to point to the last callee-saved
// slot before popping them off! Same applies for the case, when stack was
// realigned.
if (RegInfo->needsStackRealignment(MF) || MFI->hasVarSizedObjects()) {
if (RegInfo->needsStackRealignment(MF))
MBBI = FirstCSPop;
unsigned SEHFrameOffset = calculateSetFPREG(SEHStackAllocAmt);
uint64_t LEAAmount = IsWinEH ? SEHStackAllocAmt - SEHFrameOffset : -CSSize;
// There are only two legal forms of epilogue:
// - add SEHAllocationSize, %rsp
// - lea SEHAllocationSize(%FramePtr), %rsp
//
// 'mov %FramePtr, %rsp' will not be recognized as an epilogue sequence.
// However, we may use this sequence if we have a frame pointer because the
// effects of the prologue can safely be undone.
if (LEAAmount != 0) {
unsigned Opc = getLEArOpcode(Uses64BitFramePtr);
addRegOffset(BuildMI(MBB, MBBI, DL, TII.get(Opc), StackPtr),
FramePtr, false, LEAAmount);
--MBBI;
} else {
unsigned Opc = (Uses64BitFramePtr ? X86::MOV64rr : X86::MOV32rr);
BuildMI(MBB, MBBI, DL, TII.get(Opc), StackPtr)
.addReg(FramePtr);
--MBBI;
}
} else if (NumBytes) {
// Adjust stack pointer back: ESP += numbytes.
emitSPUpdate(MBB, MBBI, StackPtr, NumBytes, Is64Bit, Uses64BitFramePtr,
UseLEAForSP, TII, *RegInfo);
--MBBI;
}
// Windows unwinder will not invoke function's exception handler if IP is
// either in prologue or in epilogue. This behavior causes a problem when a
// call immediately precedes an epilogue, because the return address points
// into the epilogue. To cope with that, we insert an epilogue marker here,
// then replace it with a 'nop' if it ends up immediately after a CALL in the
// final emitted code.
if (NeedsWinEH)
BuildMI(MBB, MBBI, DL, TII.get(X86::SEH_Epilogue));
// We're returning from function via eh_return.
if (RetOpcode == X86::EH_RETURN || RetOpcode == X86::EH_RETURN64) {
MBBI = MBB.getLastNonDebugInstr();
MachineOperand &DestAddr = MBBI->getOperand(0);
assert(DestAddr.isReg() && "Offset should be in register!");
BuildMI(MBB, MBBI, DL,
TII.get(Uses64BitFramePtr ? X86::MOV64rr : X86::MOV32rr),
StackPtr).addReg(DestAddr.getReg());
} else if (RetOpcode == X86::TCRETURNri || RetOpcode == X86::TCRETURNdi ||
RetOpcode == X86::TCRETURNmi ||
RetOpcode == X86::TCRETURNri64 || RetOpcode == X86::TCRETURNdi64 ||
RetOpcode == X86::TCRETURNmi64) {
bool isMem = RetOpcode == X86::TCRETURNmi || RetOpcode == X86::TCRETURNmi64;
// Tail call return: adjust the stack pointer and jump to callee.
MBBI = MBB.getLastNonDebugInstr();
MachineOperand &JumpTarget = MBBI->getOperand(0);
MachineOperand &StackAdjust = MBBI->getOperand(isMem ? 5 : 1);
assert(StackAdjust.isImm() && "Expecting immediate value.");
// Adjust stack pointer.
int StackAdj = StackAdjust.getImm();
int MaxTCDelta = X86FI->getTCReturnAddrDelta();
int Offset = 0;
assert(MaxTCDelta <= 0 && "MaxTCDelta should never be positive");
// Incoporate the retaddr area.
Offset = StackAdj-MaxTCDelta;
assert(Offset >= 0 && "Offset should never be negative");
if (Offset) {
// Check for possible merge with preceding ADD instruction.
Offset += mergeSPUpdates(MBB, MBBI, StackPtr, true);
emitSPUpdate(MBB, MBBI, StackPtr, Offset, Is64Bit, Uses64BitFramePtr,
UseLEAForSP, TII, *RegInfo);
}
// Jump to label or value in register.
bool IsWin64 = STI.isTargetWin64();
if (RetOpcode == X86::TCRETURNdi || RetOpcode == X86::TCRETURNdi64) {
unsigned Op = (RetOpcode == X86::TCRETURNdi)
? X86::TAILJMPd
: (IsWin64 ? X86::TAILJMPd64_REX : X86::TAILJMPd64);
MachineInstrBuilder MIB = BuildMI(MBB, MBBI, DL, TII.get(Op));
if (JumpTarget.isGlobal())
MIB.addGlobalAddress(JumpTarget.getGlobal(), JumpTarget.getOffset(),
JumpTarget.getTargetFlags());
else {
assert(JumpTarget.isSymbol());
MIB.addExternalSymbol(JumpTarget.getSymbolName(),
JumpTarget.getTargetFlags());
}
} else if (RetOpcode == X86::TCRETURNmi || RetOpcode == X86::TCRETURNmi64) {
unsigned Op = (RetOpcode == X86::TCRETURNmi)
? X86::TAILJMPm
: (IsWin64 ? X86::TAILJMPm64_REX : X86::TAILJMPm64);
MachineInstrBuilder MIB = BuildMI(MBB, MBBI, DL, TII.get(Op));
for (unsigned i = 0; i != 5; ++i)
MIB.addOperand(MBBI->getOperand(i));
} else if (RetOpcode == X86::TCRETURNri64) {
BuildMI(MBB, MBBI, DL,
TII.get(IsWin64 ? X86::TAILJMPr64_REX : X86::TAILJMPr64))
.addReg(JumpTarget.getReg(), RegState::Kill);
} else {
BuildMI(MBB, MBBI, DL, TII.get(X86::TAILJMPr)).
addReg(JumpTarget.getReg(), RegState::Kill);
}
MachineInstr *NewMI = std::prev(MBBI);
NewMI->copyImplicitOps(MF, MBBI);
// Delete the pseudo instruction TCRETURN.
MBB.erase(MBBI);
} else if ((RetOpcode == X86::RETQ || RetOpcode == X86::RETL ||
RetOpcode == X86::RETIQ || RetOpcode == X86::RETIL) &&
(X86FI->getTCReturnAddrDelta() < 0)) {
// Add the return addr area delta back since we are not tail calling.
int delta = -1*X86FI->getTCReturnAddrDelta();
MBBI = MBB.getLastNonDebugInstr();
// Check for possible merge with preceding ADD instruction.
delta += mergeSPUpdates(MBB, MBBI, StackPtr, true);
emitSPUpdate(MBB, MBBI, StackPtr, delta, Is64Bit, Uses64BitFramePtr,
UseLEAForSP, TII, *RegInfo);
}
}
int X86FrameLowering::getFrameIndexOffset(const MachineFunction &MF,
int FI) const {
const X86RegisterInfo *RegInfo =
MF.getSubtarget<X86Subtarget>().getRegisterInfo();
const MachineFrameInfo *MFI = MF.getFrameInfo();
// Offset will hold the offset from the stack pointer at function entry to the
// object.
// We need to factor in additional offsets applied during the prologue to the
// frame, base, and stack pointer depending on which is used.
int Offset = MFI->getObjectOffset(FI) - getOffsetOfLocalArea();
const X86MachineFunctionInfo *X86FI = MF.getInfo<X86MachineFunctionInfo>();
unsigned CSSize = X86FI->getCalleeSavedFrameSize();
uint64_t StackSize = MFI->getStackSize();
unsigned SlotSize = RegInfo->getSlotSize();
bool HasFP = hasFP(MF);
bool IsWinEH = MF.getTarget().getMCAsmInfo()->usesWindowsCFI();
int64_t FPDelta = 0;
if (IsWinEH) {
assert(!MFI->hasCalls() || (StackSize % 16) == 8);
// Calculate required stack adjustment.
uint64_t FrameSize = StackSize - SlotSize;
// If required, include space for extra hidden slot for stashing base pointer.
if (X86FI->getRestoreBasePointer())
FrameSize += SlotSize;
uint64_t NumBytes = FrameSize - CSSize;
uint64_t SEHFrameOffset = calculateSetFPREG(NumBytes);
if (FI && FI == X86FI->getFAIndex())
return -SEHFrameOffset;
// FPDelta is the offset from the "traditional" FP location of the old base
// pointer followed by return address and the location required by the
// restricted Win64 prologue.
// Add FPDelta to all offsets below that go through the frame pointer.
FPDelta = FrameSize - SEHFrameOffset;
assert((!MFI->hasCalls() || (FPDelta % 16) == 0) &&
"FPDelta isn't aligned per the Win64 ABI!");
}
if (RegInfo->hasBasePointer(MF)) {
assert(HasFP && "VLAs and dynamic stack realign, but no FP?!");
if (FI < 0) {
// Skip the saved EBP.
return Offset + SlotSize + FPDelta;
} else {
assert((-(Offset + StackSize)) % MFI->getObjectAlignment(FI) == 0);
return Offset + StackSize;
}
} else if (RegInfo->needsStackRealignment(MF)) {
if (FI < 0) {
// Skip the saved EBP.
return Offset + SlotSize + FPDelta;
} else {
assert((-(Offset + StackSize)) % MFI->getObjectAlignment(FI) == 0);
return Offset + StackSize;
}
// FIXME: Support tail calls
} else {
if (!HasFP)
return Offset + StackSize;
// Skip the saved EBP.
Offset += SlotSize;
// Skip the RETADDR move area
int TailCallReturnAddrDelta = X86FI->getTCReturnAddrDelta();
if (TailCallReturnAddrDelta < 0)
Offset -= TailCallReturnAddrDelta;
}
return Offset + FPDelta;
}
int X86FrameLowering::getFrameIndexReference(const MachineFunction &MF, int FI,
unsigned &FrameReg) const {
const X86RegisterInfo *RegInfo =
MF.getSubtarget<X86Subtarget>().getRegisterInfo();
// We can't calculate offset from frame pointer if the stack is realigned,
// so enforce usage of stack/base pointer. The base pointer is used when we
// have dynamic allocas in addition to dynamic realignment.
if (RegInfo->hasBasePointer(MF))
FrameReg = RegInfo->getBaseRegister();
else if (RegInfo->needsStackRealignment(MF))
FrameReg = RegInfo->getStackRegister();
else
FrameReg = RegInfo->getFrameRegister(MF);
return getFrameIndexOffset(MF, FI);
}
// Simplified from getFrameIndexOffset keeping only StackPointer cases
int X86FrameLowering::getFrameIndexOffsetFromSP(const MachineFunction &MF, int FI) const {
const MachineFrameInfo *MFI = MF.getFrameInfo();
// Does not include any dynamic realign.
const uint64_t StackSize = MFI->getStackSize();
{
#ifndef NDEBUG
const X86RegisterInfo *RegInfo =
MF.getSubtarget<X86Subtarget>().getRegisterInfo();
// Note: LLVM arranges the stack as:
// Args > Saved RetPC (<--FP) > CSRs > dynamic alignment (<--BP)
// > "Stack Slots" (<--SP)
// We can always address StackSlots from RSP. We can usually (unless
// needsStackRealignment) address CSRs from RSP, but sometimes need to
// address them from RBP. FixedObjects can be placed anywhere in the stack
// frame depending on their specific requirements (i.e. we can actually
// refer to arguments to the function which are stored in the *callers*
// frame). As a result, THE RESULT OF THIS CALL IS MEANINGLESS FOR CSRs
// AND FixedObjects IFF needsStackRealignment or hasVarSizedObject.
assert(!RegInfo->hasBasePointer(MF) && "we don't handle this case");
// We don't handle tail calls, and shouldn't be seeing them
// either.
int TailCallReturnAddrDelta =
MF.getInfo<X86MachineFunctionInfo>()->getTCReturnAddrDelta();
assert(!(TailCallReturnAddrDelta < 0) && "we don't handle this case!");
#endif
}
// This is how the math works out:
//
// %rsp grows (i.e. gets lower) left to right. Each box below is
// one word (eight bytes). Obj0 is the stack slot we're trying to
// get to.
//
// ----------------------------------
// | BP | Obj0 | Obj1 | ... | ObjN |
// ----------------------------------
// ^ ^ ^ ^
// A B C E
//
// A is the incoming stack pointer.
// (B - A) is the local area offset (-8 for x86-64) [1]
// (C - A) is the Offset returned by MFI->getObjectOffset for Obj0 [2]
//
// |(E - B)| is the StackSize (absolute value, positive). For a
// stack that grown down, this works out to be (B - E). [3]
//
// E is also the value of %rsp after stack has been set up, and we
// want (C - E) -- the value we can add to %rsp to get to Obj0. Now
// (C - E) == (C - A) - (B - A) + (B - E)
// { Using [1], [2] and [3] above }
// == getObjectOffset - LocalAreaOffset + StackSize
//
// Get the Offset from the StackPointer
int Offset = MFI->getObjectOffset(FI) - getOffsetOfLocalArea();
return Offset + StackSize;
}
// Simplified from getFrameIndexReference keeping only StackPointer cases
int X86FrameLowering::getFrameIndexReferenceFromSP(const MachineFunction &MF,
int FI,
unsigned &FrameReg) const {
const X86RegisterInfo *RegInfo =
MF.getSubtarget<X86Subtarget>().getRegisterInfo();
assert(!RegInfo->hasBasePointer(MF) && "we don't handle this case");
FrameReg = RegInfo->getStackRegister();
return getFrameIndexOffsetFromSP(MF, FI);
}
bool X86FrameLowering::assignCalleeSavedSpillSlots(
MachineFunction &MF, const TargetRegisterInfo *TRI,
std::vector<CalleeSavedInfo> &CSI) const {
MachineFrameInfo *MFI = MF.getFrameInfo();
const X86RegisterInfo *RegInfo =
MF.getSubtarget<X86Subtarget>().getRegisterInfo();
unsigned SlotSize = RegInfo->getSlotSize();
X86MachineFunctionInfo *X86FI = MF.getInfo<X86MachineFunctionInfo>();
unsigned CalleeSavedFrameSize = 0;
int SpillSlotOffset = getOffsetOfLocalArea() + X86FI->getTCReturnAddrDelta();
if (hasFP(MF)) {
// emitPrologue always spills frame register the first thing.
SpillSlotOffset -= SlotSize;
MFI->CreateFixedSpillStackObject(SlotSize, SpillSlotOffset);
// Since emitPrologue and emitEpilogue will handle spilling and restoring of
// the frame register, we can delete it from CSI list and not have to worry
// about avoiding it later.
unsigned FPReg = RegInfo->getFrameRegister(MF);
for (unsigned i = 0; i < CSI.size(); ++i) {
if (TRI->regsOverlap(CSI[i].getReg(),FPReg)) {
CSI.erase(CSI.begin() + i);
break;
}
}
}
// Assign slots for GPRs. It increases frame size.
for (unsigned i = CSI.size(); i != 0; --i) {
unsigned Reg = CSI[i - 1].getReg();
if (!X86::GR64RegClass.contains(Reg) && !X86::GR32RegClass.contains(Reg))
continue;
SpillSlotOffset -= SlotSize;
CalleeSavedFrameSize += SlotSize;
int SlotIndex = MFI->CreateFixedSpillStackObject(SlotSize, SpillSlotOffset);
CSI[i - 1].setFrameIdx(SlotIndex);
}
X86FI->setCalleeSavedFrameSize(CalleeSavedFrameSize);
// Assign slots for XMMs.
for (unsigned i = CSI.size(); i != 0; --i) {
unsigned Reg = CSI[i - 1].getReg();
if (X86::GR64RegClass.contains(Reg) || X86::GR32RegClass.contains(Reg))
continue;
const TargetRegisterClass *RC = RegInfo->getMinimalPhysRegClass(Reg);
// ensure alignment
SpillSlotOffset -= std::abs(SpillSlotOffset) % RC->getAlignment();
// spill into slot
SpillSlotOffset -= RC->getSize();
int SlotIndex =
MFI->CreateFixedSpillStackObject(RC->getSize(), SpillSlotOffset);
CSI[i - 1].setFrameIdx(SlotIndex);
MFI->ensureMaxAlignment(RC->getAlignment());
}
return true;
}
bool X86FrameLowering::spillCalleeSavedRegisters(
MachineBasicBlock &MBB, MachineBasicBlock::iterator MI,
const std::vector<CalleeSavedInfo> &CSI,
const TargetRegisterInfo *TRI) const {
DebugLoc DL = MBB.findDebugLoc(MI);
MachineFunction &MF = *MBB.getParent();
const X86Subtarget &STI = MF.getSubtarget<X86Subtarget>();
const TargetInstrInfo &TII = *STI.getInstrInfo();
// Push GPRs. It increases frame size.
unsigned Opc = STI.is64Bit() ? X86::PUSH64r : X86::PUSH32r;
for (unsigned i = CSI.size(); i != 0; --i) {
unsigned Reg = CSI[i - 1].getReg();
if (!X86::GR64RegClass.contains(Reg) && !X86::GR32RegClass.contains(Reg))
continue;
// Add the callee-saved register as live-in. It's killed at the spill.
MBB.addLiveIn(Reg);
BuildMI(MBB, MI, DL, TII.get(Opc)).addReg(Reg, RegState::Kill)
.setMIFlag(MachineInstr::FrameSetup);
}
// Make XMM regs spilled. X86 does not have ability of push/pop XMM.
// It can be done by spilling XMMs to stack frame.
for (unsigned i = CSI.size(); i != 0; --i) {
unsigned Reg = CSI[i-1].getReg();
if (X86::GR64RegClass.contains(Reg) || X86::GR32RegClass.contains(Reg))
continue;
// Add the callee-saved register as live-in. It's killed at the spill.
MBB.addLiveIn(Reg);
const TargetRegisterClass *RC = TRI->getMinimalPhysRegClass(Reg);
TII.storeRegToStackSlot(MBB, MI, Reg, true, CSI[i - 1].getFrameIdx(), RC,
TRI);
--MI;
MI->setFlag(MachineInstr::FrameSetup);
++MI;
}
return true;
}
bool X86FrameLowering::restoreCalleeSavedRegisters(MachineBasicBlock &MBB,
MachineBasicBlock::iterator MI,
const std::vector<CalleeSavedInfo> &CSI,
const TargetRegisterInfo *TRI) const {
if (CSI.empty())
return false;
DebugLoc DL = MBB.findDebugLoc(MI);
MachineFunction &MF = *MBB.getParent();
const X86Subtarget &STI = MF.getSubtarget<X86Subtarget>();
const TargetInstrInfo &TII = *STI.getInstrInfo();
// Reload XMMs from stack frame.
for (unsigned i = 0, e = CSI.size(); i != e; ++i) {
unsigned Reg = CSI[i].getReg();
if (X86::GR64RegClass.contains(Reg) ||
X86::GR32RegClass.contains(Reg))
continue;
const TargetRegisterClass *RC = TRI->getMinimalPhysRegClass(Reg);
TII.loadRegFromStackSlot(MBB, MI, Reg, CSI[i].getFrameIdx(), RC, TRI);
}
// POP GPRs.
unsigned Opc = STI.is64Bit() ? X86::POP64r : X86::POP32r;
for (unsigned i = 0, e = CSI.size(); i != e; ++i) {
unsigned Reg = CSI[i].getReg();
if (!X86::GR64RegClass.contains(Reg) &&
!X86::GR32RegClass.contains(Reg))
continue;
BuildMI(MBB, MI, DL, TII.get(Opc), Reg);
}
return true;
}
void
X86FrameLowering::processFunctionBeforeCalleeSavedScan(MachineFunction &MF,
RegScavenger *RS) const {
MachineFrameInfo *MFI = MF.getFrameInfo();
const X86RegisterInfo *RegInfo =
MF.getSubtarget<X86Subtarget>().getRegisterInfo();
unsigned SlotSize = RegInfo->getSlotSize();
X86MachineFunctionInfo *X86FI = MF.getInfo<X86MachineFunctionInfo>();
int64_t TailCallReturnAddrDelta = X86FI->getTCReturnAddrDelta();
if (TailCallReturnAddrDelta < 0) {
// create RETURNADDR area
// arg
// arg
// RETADDR
// { ...
// RETADDR area
// ...
// }
// [EBP]
MFI->CreateFixedObject(-TailCallReturnAddrDelta,
TailCallReturnAddrDelta - SlotSize, true);
}
// Spill the BasePtr if it's used.
if (RegInfo->hasBasePointer(MF))
MF.getRegInfo().setPhysRegUsed(RegInfo->getBaseRegister());
}
static bool
HasNestArgument(const MachineFunction *MF) {
const Function *F = MF->getFunction();
for (Function::const_arg_iterator I = F->arg_begin(), E = F->arg_end();
I != E; I++) {
if (I->hasNestAttr())
return true;
}
return false;
}
/// GetScratchRegister - Get a temp register for performing work in the
/// segmented stack and the Erlang/HiPE stack prologue. Depending on platform
/// and the properties of the function either one or two registers will be
/// needed. Set primary to true for the first register, false for the second.
static unsigned
GetScratchRegister(bool Is64Bit, bool IsLP64, const MachineFunction &MF, bool Primary) {
CallingConv::ID CallingConvention = MF.getFunction()->getCallingConv();
// Erlang stuff.
if (CallingConvention == CallingConv::HiPE) {
if (Is64Bit)
return Primary ? X86::R14 : X86::R13;
else
return Primary ? X86::EBX : X86::EDI;
}
if (Is64Bit) {
if (IsLP64)
return Primary ? X86::R11 : X86::R12;
else
return Primary ? X86::R11D : X86::R12D;
}
bool IsNested = HasNestArgument(&MF);
if (CallingConvention == CallingConv::X86_FastCall ||
CallingConvention == CallingConv::Fast) {
if (IsNested)
report_fatal_error("Segmented stacks does not support fastcall with "
"nested function.");
return Primary ? X86::EAX : X86::ECX;
}
if (IsNested)
return Primary ? X86::EDX : X86::EAX;
return Primary ? X86::ECX : X86::EAX;
}
// The stack limit in the TCB is set to this many bytes above the actual stack
// limit.
static const uint64_t kSplitStackAvailable = 256;
void X86FrameLowering::adjustForSegmentedStacks(
MachineFunction &MF, MachineBasicBlock &PrologueMBB) const {
assert(&PrologueMBB == &MF.front() &&
"Shrink-wrapping is not implemented yet");
MachineFrameInfo *MFI = MF.getFrameInfo();
const X86Subtarget &STI = MF.getSubtarget<X86Subtarget>();
const TargetInstrInfo &TII = *STI.getInstrInfo();
uint64_t StackSize;
bool Is64Bit = STI.is64Bit();
const bool IsLP64 = STI.isTarget64BitLP64();
unsigned TlsReg, TlsOffset;
DebugLoc DL;
unsigned ScratchReg = GetScratchRegister(Is64Bit, IsLP64, MF, true);
assert(!MF.getRegInfo().isLiveIn(ScratchReg) &&
"Scratch register is live-in");
if (MF.getFunction()->isVarArg())
report_fatal_error("Segmented stacks do not support vararg functions.");
if (!STI.isTargetLinux() && !STI.isTargetDarwin() && !STI.isTargetWin32() &&
!STI.isTargetWin64() && !STI.isTargetFreeBSD() &&
!STI.isTargetDragonFly())
report_fatal_error("Segmented stacks not supported on this platform.");
// Eventually StackSize will be calculated by a link-time pass; which will
// also decide whether checking code needs to be injected into this particular
// prologue.
StackSize = MFI->getStackSize();
// Do not generate a prologue for functions with a stack of size zero
if (StackSize == 0)
return;
MachineBasicBlock *allocMBB = MF.CreateMachineBasicBlock();
MachineBasicBlock *checkMBB = MF.CreateMachineBasicBlock();
X86MachineFunctionInfo *X86FI = MF.getInfo<X86MachineFunctionInfo>();
bool IsNested = false;
// We need to know if the function has a nest argument only in 64 bit mode.
if (Is64Bit)
IsNested = HasNestArgument(&MF);
// The MOV R10, RAX needs to be in a different block, since the RET we emit in
// allocMBB needs to be last (terminating) instruction.
for (MachineBasicBlock::livein_iterator i = PrologueMBB.livein_begin(),
e = PrologueMBB.livein_end();
i != e; i++) {
allocMBB->addLiveIn(*i);
checkMBB->addLiveIn(*i);
}
if (IsNested)
allocMBB->addLiveIn(IsLP64 ? X86::R10 : X86::R10D);
MF.push_front(allocMBB);
MF.push_front(checkMBB);
// When the frame size is less than 256 we just compare the stack
// boundary directly to the value of the stack pointer, per gcc.
bool CompareStackPointer = StackSize < kSplitStackAvailable;
// Read the limit off the current stacklet off the stack_guard location.
if (Is64Bit) {
if (STI.isTargetLinux()) {
TlsReg = X86::FS;
TlsOffset = IsLP64 ? 0x70 : 0x40;
} else if (STI.isTargetDarwin()) {
TlsReg = X86::GS;
TlsOffset = 0x60 + 90*8; // See pthread_machdep.h. Steal TLS slot 90.
} else if (STI.isTargetWin64()) {
TlsReg = X86::GS;
TlsOffset = 0x28; // pvArbitrary, reserved for application use
} else if (STI.isTargetFreeBSD()) {
TlsReg = X86::FS;
TlsOffset = 0x18;
} else if (STI.isTargetDragonFly()) {
TlsReg = X86::FS;
TlsOffset = 0x20; // use tls_tcb.tcb_segstack
} else {
report_fatal_error("Segmented stacks not supported on this platform.");
}
if (CompareStackPointer)
ScratchReg = IsLP64 ? X86::RSP : X86::ESP;
else
BuildMI(checkMBB, DL, TII.get(IsLP64 ? X86::LEA64r : X86::LEA64_32r), ScratchReg).addReg(X86::RSP)
.addImm(1).addReg(0).addImm(-StackSize).addReg(0);
BuildMI(checkMBB, DL, TII.get(IsLP64 ? X86::CMP64rm : X86::CMP32rm)).addReg(ScratchReg)
.addReg(0).addImm(1).addReg(0).addImm(TlsOffset).addReg(TlsReg);
} else {
if (STI.isTargetLinux()) {
TlsReg = X86::GS;
TlsOffset = 0x30;
} else if (STI.isTargetDarwin()) {
TlsReg = X86::GS;
TlsOffset = 0x48 + 90*4;
} else if (STI.isTargetWin32()) {
TlsReg = X86::FS;
TlsOffset = 0x14; // pvArbitrary, reserved for application use
} else if (STI.isTargetDragonFly()) {
TlsReg = X86::FS;
TlsOffset = 0x10; // use tls_tcb.tcb_segstack
} else if (STI.isTargetFreeBSD()) {
report_fatal_error("Segmented stacks not supported on FreeBSD i386.");
} else {
report_fatal_error("Segmented stacks not supported on this platform.");
}
if (CompareStackPointer)
ScratchReg = X86::ESP;
else
BuildMI(checkMBB, DL, TII.get(X86::LEA32r), ScratchReg).addReg(X86::ESP)
.addImm(1).addReg(0).addImm(-StackSize).addReg(0);
if (STI.isTargetLinux() || STI.isTargetWin32() || STI.isTargetWin64() ||
STI.isTargetDragonFly()) {
BuildMI(checkMBB, DL, TII.get(X86::CMP32rm)).addReg(ScratchReg)
.addReg(0).addImm(0).addReg(0).addImm(TlsOffset).addReg(TlsReg);
} else if (STI.isTargetDarwin()) {
// TlsOffset doesn't fit into a mod r/m byte so we need an extra register.
unsigned ScratchReg2;
bool SaveScratch2;
if (CompareStackPointer) {
// The primary scratch register is available for holding the TLS offset.
ScratchReg2 = GetScratchRegister(Is64Bit, IsLP64, MF, true);
SaveScratch2 = false;
} else {
// Need to use a second register to hold the TLS offset
ScratchReg2 = GetScratchRegister(Is64Bit, IsLP64, MF, false);
// Unfortunately, with fastcc the second scratch register may hold an
// argument.
SaveScratch2 = MF.getRegInfo().isLiveIn(ScratchReg2);
}
// If Scratch2 is live-in then it needs to be saved.
assert((!MF.getRegInfo().isLiveIn(ScratchReg2) || SaveScratch2) &&
"Scratch register is live-in and not saved");
if (SaveScratch2)
BuildMI(checkMBB, DL, TII.get(X86::PUSH32r))
.addReg(ScratchReg2, RegState::Kill);
BuildMI(checkMBB, DL, TII.get(X86::MOV32ri), ScratchReg2)
.addImm(TlsOffset);
BuildMI(checkMBB, DL, TII.get(X86::CMP32rm))
.addReg(ScratchReg)
.addReg(ScratchReg2).addImm(1).addReg(0)
.addImm(0)
.addReg(TlsReg);
if (SaveScratch2)
BuildMI(checkMBB, DL, TII.get(X86::POP32r), ScratchReg2);
}
}
// This jump is taken if SP >= (Stacklet Limit + Stack Space required).
// It jumps to normal execution of the function body.
BuildMI(checkMBB, DL, TII.get(X86::JA_1)).addMBB(&PrologueMBB);
// On 32 bit we first push the arguments size and then the frame size. On 64
// bit, we pass the stack frame size in r10 and the argument size in r11.
if (Is64Bit) {
// Functions with nested arguments use R10, so it needs to be saved across
// the call to _morestack
const unsigned RegAX = IsLP64 ? X86::RAX : X86::EAX;
const unsigned Reg10 = IsLP64 ? X86::R10 : X86::R10D;
const unsigned Reg11 = IsLP64 ? X86::R11 : X86::R11D;
const unsigned MOVrr = IsLP64 ? X86::MOV64rr : X86::MOV32rr;
const unsigned MOVri = IsLP64 ? X86::MOV64ri : X86::MOV32ri;
if (IsNested)
BuildMI(allocMBB, DL, TII.get(MOVrr), RegAX).addReg(Reg10);
BuildMI(allocMBB, DL, TII.get(MOVri), Reg10)
.addImm(StackSize);
BuildMI(allocMBB, DL, TII.get(MOVri), Reg11)
.addImm(X86FI->getArgumentStackSize());
MF.getRegInfo().setPhysRegUsed(Reg10);
MF.getRegInfo().setPhysRegUsed(Reg11);
} else {
BuildMI(allocMBB, DL, TII.get(X86::PUSHi32))
.addImm(X86FI->getArgumentStackSize());
BuildMI(allocMBB, DL, TII.get(X86::PUSHi32))
.addImm(StackSize);
}
// __morestack is in libgcc
if (Is64Bit && MF.getTarget().getCodeModel() == CodeModel::Large) {
// Under the large code model, we cannot assume that __morestack lives
// within 2^31 bytes of the call site, so we cannot use pc-relative
// addressing. We cannot perform the call via a temporary register,
// as the rax register may be used to store the static chain, and all
// other suitable registers may be either callee-save or used for
// parameter passing. We cannot use the stack at this point either
// because __morestack manipulates the stack directly.
//
// To avoid these issues, perform an indirect call via a read-only memory
// location containing the address.
//
// This solution is not perfect, as it assumes that the .rodata section
// is laid out within 2^31 bytes of each function body, but this seems
// to be sufficient for JIT.
BuildMI(allocMBB, DL, TII.get(X86::CALL64m))
.addReg(X86::RIP)
.addImm(0)
.addReg(0)
.addExternalSymbol("__morestack_addr")
.addReg(0);
MF.getMMI().setUsesMorestackAddr(true);
} else {
if (Is64Bit)
BuildMI(allocMBB, DL, TII.get(X86::CALL64pcrel32))
.addExternalSymbol("__morestack");
else
BuildMI(allocMBB, DL, TII.get(X86::CALLpcrel32))
.addExternalSymbol("__morestack");
}
if (IsNested)
BuildMI(allocMBB, DL, TII.get(X86::MORESTACK_RET_RESTORE_R10));
else
BuildMI(allocMBB, DL, TII.get(X86::MORESTACK_RET));
allocMBB->addSuccessor(&PrologueMBB);
checkMBB->addSuccessor(allocMBB);
checkMBB->addSuccessor(&PrologueMBB);
#ifdef XDEBUG
MF.verify();
#endif
}
/// Erlang programs may need a special prologue to handle the stack size they
/// might need at runtime. That is because Erlang/OTP does not implement a C
/// stack but uses a custom implementation of hybrid stack/heap architecture.
/// (for more information see Eric Stenman's Ph.D. thesis:
/// http://publications.uu.se/uu/fulltext/nbn_se_uu_diva-2688.pdf)
///
/// CheckStack:
/// temp0 = sp - MaxStack
/// if( temp0 < SP_LIMIT(P) ) goto IncStack else goto OldStart
/// OldStart:
/// ...
/// IncStack:
/// call inc_stack # doubles the stack space
/// temp0 = sp - MaxStack
/// if( temp0 < SP_LIMIT(P) ) goto IncStack else goto OldStart
void X86FrameLowering::adjustForHiPEPrologue(
MachineFunction &MF, MachineBasicBlock &PrologueMBB) const {
const X86Subtarget &STI = MF.getSubtarget<X86Subtarget>();
const TargetInstrInfo &TII = *STI.getInstrInfo();
MachineFrameInfo *MFI = MF.getFrameInfo();
const unsigned SlotSize = STI.getRegisterInfo()->getSlotSize();
const bool Is64Bit = STI.is64Bit();
const bool IsLP64 = STI.isTarget64BitLP64();
DebugLoc DL;
// HiPE-specific values
const unsigned HipeLeafWords = 24;
const unsigned CCRegisteredArgs = Is64Bit ? 6 : 5;
const unsigned Guaranteed = HipeLeafWords * SlotSize;
unsigned CallerStkArity = MF.getFunction()->arg_size() > CCRegisteredArgs ?
MF.getFunction()->arg_size() - CCRegisteredArgs : 0;
unsigned MaxStack = MFI->getStackSize() + CallerStkArity*SlotSize + SlotSize;
assert(STI.isTargetLinux() &&
"HiPE prologue is only supported on Linux operating systems.");
// Compute the largest caller's frame that is needed to fit the callees'
// frames. This 'MaxStack' is computed from:
//
// a) the fixed frame size, which is the space needed for all spilled temps,
// b) outgoing on-stack parameter areas, and
// c) the minimum stack space this function needs to make available for the
// functions it calls (a tunable ABI property).
if (MFI->hasCalls()) {
unsigned MoreStackForCalls = 0;
for (MachineFunction::iterator MBBI = MF.begin(), MBBE = MF.end();
MBBI != MBBE; ++MBBI)
for (MachineBasicBlock::iterator MI = MBBI->begin(), ME = MBBI->end();
MI != ME; ++MI) {
if (!MI->isCall())
continue;
// Get callee operand.
const MachineOperand &MO = MI->getOperand(0);
// Only take account of global function calls (no closures etc.).
if (!MO.isGlobal())
continue;
const Function *F = dyn_cast<Function>(MO.getGlobal());
if (!F)
continue;
// Do not update 'MaxStack' for primitive and built-in functions
// (encoded with names either starting with "erlang."/"bif_" or not
// having a ".", such as a simple <Module>.<Function>.<Arity>, or an
// "_", such as the BIF "suspend_0") as they are executed on another
// stack.
if (F->getName().find("erlang.") != StringRef::npos ||
F->getName().find("bif_") != StringRef::npos ||
F->getName().find_first_of("._") == StringRef::npos)
continue;
unsigned CalleeStkArity =
F->arg_size() > CCRegisteredArgs ? F->arg_size()-CCRegisteredArgs : 0;
if (HipeLeafWords - 1 > CalleeStkArity)
MoreStackForCalls = std::max(MoreStackForCalls,
(HipeLeafWords - 1 - CalleeStkArity) * SlotSize);
}
MaxStack += MoreStackForCalls;
}
// If the stack frame needed is larger than the guaranteed then runtime checks
// and calls to "inc_stack_0" BIF should be inserted in the assembly prologue.
if (MaxStack > Guaranteed) {
assert(&PrologueMBB == &MF.front() &&
"Shrink-wrapping is not implemented yet");
MachineBasicBlock *stackCheckMBB = MF.CreateMachineBasicBlock();
MachineBasicBlock *incStackMBB = MF.CreateMachineBasicBlock();
for (MachineBasicBlock::livein_iterator I = PrologueMBB.livein_begin(),
E = PrologueMBB.livein_end();
I != E; I++) {
stackCheckMBB->addLiveIn(*I);
incStackMBB->addLiveIn(*I);
}
MF.push_front(incStackMBB);
MF.push_front(stackCheckMBB);
unsigned ScratchReg, SPReg, PReg, SPLimitOffset;
unsigned LEAop, CMPop, CALLop;
if (Is64Bit) {
SPReg = X86::RSP;
PReg = X86::RBP;
LEAop = X86::LEA64r;
CMPop = X86::CMP64rm;
CALLop = X86::CALL64pcrel32;
SPLimitOffset = 0x90;
} else {
SPReg = X86::ESP;
PReg = X86::EBP;
LEAop = X86::LEA32r;
CMPop = X86::CMP32rm;
CALLop = X86::CALLpcrel32;
SPLimitOffset = 0x4c;
}
ScratchReg = GetScratchRegister(Is64Bit, IsLP64, MF, true);
assert(!MF.getRegInfo().isLiveIn(ScratchReg) &&
"HiPE prologue scratch register is live-in");
// Create new MBB for StackCheck:
addRegOffset(BuildMI(stackCheckMBB, DL, TII.get(LEAop), ScratchReg),
SPReg, false, -MaxStack);
// SPLimitOffset is in a fixed heap location (pointed by BP).
addRegOffset(BuildMI(stackCheckMBB, DL, TII.get(CMPop))
.addReg(ScratchReg), PReg, false, SPLimitOffset);
BuildMI(stackCheckMBB, DL, TII.get(X86::JAE_1)).addMBB(&PrologueMBB);
// Create new MBB for IncStack:
BuildMI(incStackMBB, DL, TII.get(CALLop)).
addExternalSymbol("inc_stack_0");
addRegOffset(BuildMI(incStackMBB, DL, TII.get(LEAop), ScratchReg),
SPReg, false, -MaxStack);
addRegOffset(BuildMI(incStackMBB, DL, TII.get(CMPop))
.addReg(ScratchReg), PReg, false, SPLimitOffset);
BuildMI(incStackMBB, DL, TII.get(X86::JLE_1)).addMBB(incStackMBB);
stackCheckMBB->addSuccessor(&PrologueMBB, 99);
stackCheckMBB->addSuccessor(incStackMBB, 1);
incStackMBB->addSuccessor(&PrologueMBB, 99);
incStackMBB->addSuccessor(incStackMBB, 1);
}
#ifdef XDEBUG
MF.verify();
#endif
}
void X86FrameLowering::
eliminateCallFramePseudoInstr(MachineFunction &MF, MachineBasicBlock &MBB,
MachineBasicBlock::iterator I) const {
const X86Subtarget &STI = MF.getSubtarget<X86Subtarget>();
const TargetInstrInfo &TII = *STI.getInstrInfo();
const X86RegisterInfo &RegInfo = *STI.getRegisterInfo();
unsigned StackPtr = RegInfo.getStackRegister();
bool reserveCallFrame = hasReservedCallFrame(MF);
unsigned Opcode = I->getOpcode();
bool isDestroy = Opcode == TII.getCallFrameDestroyOpcode();
bool IsLP64 = STI.isTarget64BitLP64();
DebugLoc DL = I->getDebugLoc();
uint64_t Amount = !reserveCallFrame ? I->getOperand(0).getImm() : 0;
uint64_t InternalAmt = (isDestroy || Amount) ? I->getOperand(1).getImm() : 0;
I = MBB.erase(I);
if (!reserveCallFrame) {
// If the stack pointer can be changed after prologue, turn the
// adjcallstackup instruction into a 'sub ESP, <amt>' and the
// adjcallstackdown instruction into 'add ESP, <amt>'
if (Amount == 0)
return;
// We need to keep the stack aligned properly. To do this, we round the
// amount of space needed for the outgoing arguments up to the next
// alignment boundary.
unsigned StackAlign = getStackAlignment();
Amount = RoundUpToAlignment(Amount, StackAlign);
MachineInstr *New = nullptr;
// Factor out the amount that gets handled inside the sequence
// (Pushes of argument for frame setup, callee pops for frame destroy)
Amount -= InternalAmt;
if (Amount) {
if (Opcode == TII.getCallFrameSetupOpcode()) {
New = BuildMI(MF, DL, TII.get(getSUBriOpcode(IsLP64, Amount)), StackPtr)
.addReg(StackPtr).addImm(Amount);
} else {
assert(Opcode == TII.getCallFrameDestroyOpcode());
unsigned Opc = getADDriOpcode(IsLP64, Amount);
New = BuildMI(MF, DL, TII.get(Opc), StackPtr)
.addReg(StackPtr).addImm(Amount);
}
}
if (New) {
// The EFLAGS implicit def is dead.
New->getOperand(3).setIsDead();
// Replace the pseudo instruction with a new instruction.
MBB.insert(I, New);
}
return;
}
if (Opcode == TII.getCallFrameDestroyOpcode() && InternalAmt) {
// If we are performing frame pointer elimination and if the callee pops
// something off the stack pointer, add it back. We do this until we have
// more advanced stack pointer tracking ability.
unsigned Opc = getSUBriOpcode(IsLP64, InternalAmt);
MachineInstr *New = BuildMI(MF, DL, TII.get(Opc), StackPtr)
.addReg(StackPtr).addImm(InternalAmt);
// The EFLAGS implicit def is dead.
New->getOperand(3).setIsDead();
// We are not tracking the stack pointer adjustment by the callee, so make
// sure we restore the stack pointer immediately after the call, there may
// be spill code inserted between the CALL and ADJCALLSTACKUP instructions.
MachineBasicBlock::iterator B = MBB.begin();
while (I != B && !std::prev(I)->isCall())
--I;
MBB.insert(I, New);
}
}
Reference in New Issue View Git Blame Copy Permalink