This new pattern mixes vector.transpose and direct lowering to vector.reduce.
This allows more progressive lowering than immediately going to insert/extract and
composes more nicely with other canonicalizations.
This has 2 use cases:
1. for very wide vectors the generated IR may be much smaller
2. when we have a custom lowering for transpose ops we can target it directly
rather than rely LLVM
Differential Revision: https://reviews.llvm.org/D85428
When any of the memrefs in a structured linalg op has a zero dimension, it becomes dead.
This is consistent with the fact that linalg ops deduce their loop bounds from their operands.
Note however that this is not the case for the `tensor<0xelt_type>` which is a special convention
that must be lowered away into either `memref<elt_type>` or just `elt_type` before this
canonicalization can kick in.
Differential Revision: https://reviews.llvm.org/D85413
The RewritePattern will become one of several, and will be part of the LLVM conversion pass (instead of a separate pass following LLVM conversion).
Reviewed By: herhut
Differential Revision: https://reviews.llvm.org/D84946
Historical modeling of the LLVM dialect types had been wrapping LLVM IR types
and therefore needed access to the instance of LLVMContext stored in the
LLVMDialect. The new modeling does not rely on that and only needs the
MLIRContext that is used for uniquing, similarly to other MLIR types. Change
LLVMType::get<Kind>Ty functions to take `MLIRContext *` instead of
`LLVMDialect *` as first argument. This brings the code base closer to
completely removing the dependence on LLVMContext from the LLVMDialect,
together with additional support for thread-safety of its use.
Depends On D85371
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D85372
This prepares for the removal of llvm::Module and LLVMContext from the
mlir::LLVMDialect.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D85371
The intrinsics were already supported and vector.transfer_read/write lowered
direclty into these operations. By providing them as individual ops, however,
clients can used them directly, and it opens up progressively lowering transfer
operations at higher levels (rather than direct lowering to LLVM IR as done now).
Reviewed By: bkramer
Differential Revision: https://reviews.llvm.org/D85357
Previous type model in the LLVM dialect did not support identified structure
types properly and therefore could use stateless translations implemented as
free functions. The new model supports identified structs and must keep track
of the identified structure types present in the target context (LLVMContext or
MLIRContext) to avoid creating duplicate structs due to LLVM's type
auto-renaming. Expose the stateful type translation classes and use them during
translation, storing the state as part of ModuleTranslation.
Drop the test type translation mechanism that is no longer necessary and update
the tests to exercise type translation as part of the main translation flow.
Update the code in vector-to-LLVM dialect conversion that relied on stateless
translation to use the new class in a stateless manner.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D85297
Per Vulkan's SPIR-V environment spec: "While the OpSRem and OpSMod
instructions are supported by the Vulkan environment, they require
non-negative values and thus do not enable additional functionality
beyond what OpUMod provides."
The `getOffsetForBitwidth` function is used for lowering std.load
and std.store, whose indices are of `index` type and cannot be
negative. So we should be okay to use spv.UMod directly here to
be exact. Also made the comment explicit about the assumption.
Differential Revision: https://reviews.llvm.org/D83714
If Int16 is not available, 16-bit integers inside Workgroup storage
class should be emulated via 32-bit integers. This was previously
broken because the capability querying logic was incorrectly
intercepting all storage classes where it meant to only handle
interface storage classes. Adjusted where we return to fix this.
Differential Revision: https://reviews.llvm.org/D85308
`promoteMemRefDescriptors` also converts types of every operand, not only
memref-typed ones. I think `promoteMemRefDescriptors` name does not imply that.
Differential Revision: https://reviews.llvm.org/D85325
Previously, `LinalgOperand` is defined with `Type<Or<..,>>`, which produces
not very readable error messages when it is not matched, e.g.,
```
'linalg.generic' op operand #0 must be anonymous_326, but got ....
```
It is simply because the `description` property is not properly set.
This diff switches to use `AnyTypeOf` for `LinalgOperand`, which automatically
generates a description based on the allowed types provided.
As a result, the error message now becomes:
```
'linalg.generic' op operand #0 must be ranked tensor of any type values or strided memref of any type values, but got ...
```
Which is clearer and more informative.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D84428
Introduce an initial version of C API for MLIR core IR components: Value, Type,
Attribute, Operation, Region, Block, Location. These APIs allow for both
inspection and creation of the IR in the generic form and intended for wrapping
in high-level library- and language-specific constructs. At this point, there
is no stability guarantee provided for the API.
Reviewed By: stellaraccident, lattner
Differential Revision: https://reviews.llvm.org/D83310
This dialect was introduced during the bring-up of the new LLVM dialect type
system for testing purposes. The main LLVM dialect now uses the new type system
and the test dialect is no longer necessary, so remove it.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D85224
This quietly disabled use of zlib on Windows even when building with
-DLLVM_ENABLE_ZLIB=FORCE_ON.
> Rather than handling zlib handling manually, use find_package from CMake
> to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
> HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
> set to YES, which requires the distributor to explicitly select whether
> zlib is enabled or not. This simplifies the CMake handling and usage in
> the rest of the tooling.
>
> This is a reland of abb0075 with all followup changes and fixes that
> should address issues that were reported in PR44780.
>
> Differential Revision: https://reviews.llvm.org/D79219
This reverts commit 10b1b4a231 and follow-ups
64d99cc6ab and
f9fec0447e.
Handle the case where the ViewOp takes in a memref that has
an memory space.
Reviewed By: ftynse, bondhugula, nicolasvasilache
Differential Revision: https://reviews.llvm.org/D85048
The extent tensor type is a `tensor<?xindex>` that is used in the shape dialect.
To facilitate the use of this type when working with the shape dialect, we
expose the helper function for its construction.
Differential Revision: https://reviews.llvm.org/D85121
Updated the documentation with new MLIR LLVM types for
vectors, pointers, arrays and structs. Also, changed remaining
tabs to spaces.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D85277
This patch introduces a conversion of `spv.loop` to LLVM dialect.
Similarly to `spv.selection`, op's control attributes are not mapped
to LLVM yet and therefore the conversion fails if the loop control is
not `None`. Also, all blocks within the loop should be reachable in
order for conversion to succeed.
Reviewed By: mravishankar
Differential Revision: https://reviews.llvm.org/D84245
Updated the documentation for SPIR-V to LLVM conversion, particularly:
- Added a section on control flow
- Added a section on memory ops
- Added a section on GLSL ops
Also, moved `spv.FunctionCall` to control flow section. Added a new section
that will be used to describe the modelling of runtime-related ops.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D84734
- Moved TypeRange into its own header/cpp file, and add hashing support.
- Change FunctionType::get() and TupleType::get() to use TypeRange
Differential Revision: https://reviews.llvm.org/D85075
Always define a remapping for the memref replacement (`indexRemap`)
with the proper number of inputs, including all the `outerIVs`, so that
the number of inputs and the operands provided for the map don't mismatch.
Reviewed By: bondhugula, andydavis1
Differential Revision: https://reviews.llvm.org/D85177
Introduces the expand and compress operations to the Vector dialect
(important memory operations for sparse computations), together
with a first reference implementation that lowers to the LLVM IR
dialect to enable running on CPU (and other targets that support
the corresponding LLVM IR intrinsics).
Reviewed By: reidtatge
Differential Revision: https://reviews.llvm.org/D84888
Simplify semi-affine expression for the operations like ceildiv,
floordiv and modulo by any given symbol by checking divisibilty by that
symbol.
Some properties used in simplification are:
1) Commutative property of the floordiv and ceildiv:
((expr1 floordiv expr2) floordiv expr3 ) = ((expr1 floordiv expr3) floordiv expr2)
((expr1 ceildiv expr2) ceildiv expr3 ) = ((expr1 ceildiv expr3) ceildiv expr2)
While simplification if operations are different no simplification is
possible as there is no property that simplify expressions like these:
((expr1 ceildiv expr2) floordiv expr3) or ((expr1 floordiv expr2)
ceildiv expr3).
2) If both expr1 and expr2 are divisible by the expr3 then:
(expr1 % expr2) / expr3 = ((expr1 / expr3) % (expr2 / expr3))
where / is divide symbol.
3) If expr1 is divisible by expr2 then expr1 % expr2 = 0.
Signed-off-by: Yash Jain <yash.jain@polymagelabs.com>
Differential Revision: https://reviews.llvm.org/D84920
The `splitFullAndPartialTransferPrecondition` has a restrictive condition to
prevent the pattern to be applied recursively if it is nested under an scf.IfOp.
Relaxing the condition to the immediate parent op must not be an scf.IfOp lets
the pattern be applied more generally while still preventing recursion.
Differential Revision: https://reviews.llvm.org/D85209
This revision adds a transformation and a pattern that rewrites a "maybe masked" `vector.transfer_read %view[...], %pad `into a pattern resembling:
```
%1:3 = scf.if (%inBounds) {
scf.yield %view : memref<A...>, index, index
} else {
%2 = linalg.fill(%extra_alloc, %pad)
%3 = subview %view [...][...][...]
linalg.copy(%3, %alloc)
memref_cast %extra_alloc: memref<B...> to memref<A...>
scf.yield %4 : memref<A...>, index, index
}
%res= vector.transfer_read %1#0[%1#1, %1#2] {masked = [false ... false]}
```
where `extra_alloc` is a top of the function alloca'ed buffer of one vector.
This rewrite makes it possible to realize the "always full tile" abstraction where vector.transfer_read operations are guaranteed to read from a padded full buffer.
The extra work only occurs on the boundary tiles.
A new first-party modeling for LLVM IR types in the LLVM dialect has been
developed in parallel to the existing modeling based on wrapping LLVM `Type *`
instances. It resolves the long-standing problem of modeling identified
structure types, including recursive structures, and enables future removal of
LLVMContext and related locking mechanisms from LLVMDialect.
This commit only switches the modeling by (a) renaming LLVMTypeNew to LLVMType,
(b) removing the old implementaiton of LLVMType, and (c) updating the tests. It
is intentionally minimal. Separate commits will remove the infrastructure built
for the transition and update API uses where appropriate.
Depends On D85020
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D85021
These are intended to smoothen the transition and may be removed in the future
in favor of more MLIR-compatible APIs. They intentionally have the same
semantics as the existing functions, which must remain stable until the
transition is complete.
Depends On D85019
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D85020
With new LLVM dialect type modeling, the dialect types no longer wrap LLVM IR
types. Therefore, they need to be translated to and from LLVM IR during export
and import. Introduce the relevant functionality for translating types. It is
currently exercised by an ad-hoc type translation roundtripping test that will
be subsumed by the actual translation test when the type system transition is
complete.
Depends On D84339
Reviewed By: herhut
Differential Revision: https://reviews.llvm.org/D85019
The bug was not noticed because we didn't have a lot of custom type conversions
directly to LLVM dialect.
Differential Revision: https://reviews.llvm.org/D85192
This is a first patch that sweeps over tests to fix
indentation (tabs to spaces). It also adds label checks and
removes redundant matching of `%{{.*}} = `.
The following tests have been fixed:
- arithmetic-ops-to-llvm
- bitwise-ops-to-llvm
- cast-ops-to-llvm
- comparison-ops-to-llvm
- logical-ops-to-llvm (renamed to match the rest)
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D85181
Added a "clone" of the 1D vector's test_transfer_read and added a second dimensionality. The test is not as generic as I would like it to be, because more generic versions appear to break the compiler or the runtime at this stage. As bug are fixed, I will be happy to add another more complete test.
Differential Revision: https://reviews.llvm.org/D83096
Lowering of newly defined Conv ops in TC syntax to standard
dialect is not supported and therefore this commit adds support
for it.
Differential Revision: https://reviews.llvm.org/D84840
Unit attributes are given meaning by their existence, and thus have no meaningful value beyond "is it present". As such, in the format of an operation unit attributes are generally used to guard the printing of other elements and aren't generally printed themselves; as the presence of the group when parsing means that the unit attribute should be added. This revision adds support to the declarative format for eliding unit attributes in situations where they anchor an optional group, but aren't the first element.
For example,
```
let assemblyFormat = "(`is_optional` $unit_attr^)? attr-dict";
```
would print `foo.op is_optional` when $unit_attr is present, instead of the current `foo.op is_optional unit`.
Differential Revision: https://reviews.llvm.org/D84577
Remove use of iterator::difference_type to know where to insert a
moved or erased block during undo actions.
Differential Revision: https://reviews.llvm.org/D85066
This revision adds a transformation and a pattern that rewrites a "maybe masked" `vector.transfer_read %view[...], %pad `into a pattern resembling:
```
%1:3 = scf.if (%inBounds) {
scf.yield %view : memref<A...>, index, index
} else {
%2 = vector.transfer_read %view[...], %pad : memref<A...>, vector<...>
%3 = vector.type_cast %extra_alloc : memref<...> to
memref<vector<...>> store %2, %3[] : memref<vector<...>> %4 =
memref_cast %extra_alloc: memref<B...> to memref<A...> scf.yield %4 :
memref<A...>, index, index
}
%res= vector.transfer_read %1#0[%1#1, %1#2] {masked = [false ... false]}
```
where `extra_alloc` is a top of the function alloca'ed buffer of one vector.
This rewrite makes it possible to realize the "always full tile" abstraction where vector.transfer_read operations are guaranteed to read from a padded full buffer.
The extra work only occurs on the boundary tiles.
Differential Revision: https://reviews.llvm.org/D84631
This reverts commit 35b65be041.
Build is broken with -DBUILD_SHARED_LIBS=ON with some undefined
references like:
VectorTransforms.cpp:(.text._ZN4llvm12function_refIFvllEE11callback_fnIZL24createScopedInBoundsCondN4mlir25VectorTransferOpInterfaceEE3$_8EEvlll+0xa5): undefined reference to `mlir::edsc::op::operator+(mlir::Value, mlir::Value)'
The current modeling of LLVM IR types in MLIR is based on the LLVMType class
that wraps a raw `llvm::Type *` and delegates uniquing, printing and parsing to
LLVM itself. This model makes thread-safe type manipulation hard and is being
progressively replaced with a cleaner MLIR model that replicates the type
system. Introduce a set of classes reflecting the LLVM IR type system in MLIR
instead of wrapping the existing types. These are currently introduced as
separate classes without affecting the dialect flow, and are exercised through
a test dialect. Once feature parity is reached, the old implementation will be
gradually substituted with the new one.
Depends On D84171
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D84339
This revision adds a transformation and a pattern that rewrites a "maybe masked" `vector.transfer_read %view[...], %pad `into a pattern resembling:
```
%1:3 = scf.if (%inBounds) {
scf.yield %view : memref<A...>, index, index
} else {
%2 = vector.transfer_read %view[...], %pad : memref<A...>, vector<...>
%3 = vector.type_cast %extra_alloc : memref<...> to
memref<vector<...>> store %2, %3[] : memref<vector<...>> %4 =
memref_cast %extra_alloc: memref<B...> to memref<A...> scf.yield %4 :
memref<A...>, index, index
}
%res= vector.transfer_read %1#0[%1#1, %1#2] {masked = [false ... false]}
```
where `extra_alloc` is a top of the function alloca'ed buffer of one vector.
This rewrite makes it possible to realize the "always full tile" abstraction where vector.transfer_read operations are guaranteed to read from a padded full buffer.
The extra work only occurs on the boundary tiles.
Differential Revision: https://reviews.llvm.org/D84631
Nicolas Vasilache