This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
Summary:
All usages have been replaced by appropriate std::chrono funcionality, and the
class is now unused. The only used part of the cpp file is the DumpTimePoint
function, which I have moved into the only caller (CommandObjectTarget.cpp).
Reviewers: clayborg, zturner
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D26451
llvm-svn: 287096
This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
Summary:
The only interesting part here is that TimePoint and TimeValue have different
natural string representations, which affects "target modules list" output. It
is now "2016-07-09 04:02:21.000000000", whereas previously in was
"Sat Jul 9 04:02:21 2016". I wanted to check if we're OK with that.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26275
llvm-svn: 286349
I added a "thread-stop-format" to distinguish between the form
that is just the thread info (since the stop printing immediately prints
the frame info) and one with more frame 0 info - which is useful for
"thread list" and the like.
I also added a frame.no-debug boolean to the format entities so you can
print frame information differently between frames with source info and those
without.
This closes https://reviews.llvm.org/D26383.
<rdar://problem/28273697>
llvm-svn: 286288
This is better for a number of reasons. Mostly style, but also:
1) Signed-unsigned comparison warnings disappear since there is
no loop index.
2) Iterating with the range-for style gives you back an entry
that has more than just a const char*, so it's more efficient
and more useful.
3) Makes code safter since the type system enforces that it's
impossible to index out of bounds.
llvm-svn: 283413
CommandData breakpoint commands didn't know whether they were
Python or Command line commands, so they couldn't serialize &
deserialize themselves properly. Fix that.
I also changed the "breakpoint list" command to note in the output
when the commands are Python commands. Fortunately only one test
was relying on this explicit bit of text output.
llvm-svn: 282432
This change is very mechanical. All it does is change the
signature of `Options::GetDefinitions()` and `OptionGroup::
GetDefinitions()` to return an `ArrayRef<OptionDefinition>`
instead of a `const OptionDefinition *`. In the case of the
former, it deletes the sentinel entry from every table, and
in the case of the latter, it removes the `GetNumDefinitions()`
method from the interface. These are no longer necessary as
`ArrayRef` carries its own length.
In the former case, iteration was done by using a sentinel
entry, so there was no knowledge of length. Because of this
the individual option tables were allowed to be defined below
the corresponding class (after all, only a pointer was needed).
Now, however, the length must be known at compile time to
construct the `ArrayRef`, and as a result it is necessary to
move every option table before its corresponding class. This
results in this CL looking very big, but in terms of substance
there is not much here.
Differential revision: https://reviews.llvm.org/D24834
llvm-svn: 282188
This change introduces optional marking of the column within a source
line where a thread is stopped. This marking will show up when the
source code for a thread stop is displayed, when the debug info
knows the column information, and if the optional column marking is
enabled.
There are two separate methods for handling the marking of the stop
column:
* via ANSI terminal codes, which are added inline to the source line
display. The default ANSI mark-up is to underline the column.
* via a pure text-based caret that is added in the appropriate column
in a newly-inserted blank line underneath the source line in
question.
There are some new options that control how this all works.
* settings set stop-show-column
This takes one of 4 values:
* ansi-or-caret: use the ANSI terminal code mechanism if LLDB
is running with color enabled; if not, use the caret-based,
pure text method (see the "caret" mode below).
* ansi: only use the ANSI terminal code mechanism to highlight
the stop line. If LLDB is running with color disabled, no
stop column marking will occur.
* caret: only use the pure text caret method, which introduces
a newly-inserted line underneath the current line, where
the only character in the new line is a caret that highlights
the stop column in question.
* none: no stop column marking will be attempted.
* settings set stop-show-column-ansi-prefix
This is a text format that indicates the ANSI formatting
code to insert into the stream immediately preceding the
column where the stop column character will be marked up.
It defaults to ${ansi.underline}; however, it can contain
any valid LLDB format codes, e.g.
${ansi.fg.red}${ansi.bold}${ansi.underline}
* settings set stop-show-column-ansi-suffix
This is the text format that specifies the ANSI terminal
codes to end the markup that was started with the prefix
described above. It defaults to: ${ansi.normal}. This
should be sufficient for the common cases.
Significant leg-work was done by Adrian Prantl. (Thanks, Adrian!)
differential review: https://reviews.llvm.org/D20835
reviewers: clayborg, jingham
llvm-svn: 282105
This updates getters and setters to use StringRef instead of
const char *. I tested the build on Linux, Windows, and OSX
and saw no build or test failures. I cannot test any BSD
or Android variants, however I expect the required changes
to be minimal or non-existant.
llvm-svn: 282079
Serialize breakpoint names & the hardware_requested attributes.
Also added a few missing affordances to SBBreakpoint whose absence
writing the tests pointed out.
<rdar://problem/12611863>
llvm-svn: 282036
This patch also marks the const char* versions as =delete to prevent
their use. This has the potential to cause build breakages on some
platforms which I can't compile. I have tested on Windows, Linux,
and OSX. Best practices for fixing broken callsites are outlined in
Args.h in a comment above the deleted function declarations.
Eventually we can remove these =delete declarations, but for now they
are important to make sure that all implicit conversions from
const char * are manually audited to make sure that they do not invoke a
conversion from nullptr.
llvm-svn: 281919
Where possible, remove the const char* version. To keep the
risk and impact here minimal, I've only done the simplest
functions.
In the process, I found a few opportunities for adding some
unit tests, so I added those as well.
Tested on Windows, Linux, and OSX.
llvm-svn: 281799
Moved the guts of the code from CommandObjectBreakpoint to Target (should
have done it that way in the first place.) Added an SBBreakpointList class
so there's a way to specify which breakpoints to serialize and to report the
deserialized breakpoints.
<rdar://problem/12611863>
llvm-svn: 281520
Plumb unique_ptrs<> all the way through the baton interface.
NFC, this is a minor improvement to remove the possibility of an
accidental pointer ownership issue.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D24495
llvm-svn: 281360
Still to come:
1) SB API's
2) Testcases
3) Loose ends:
a) serialize Thread options
b) serialize Exception resolvers
4) "break list --file" should list breakpoints contained in a file and
"break read -f 1 3 5" should then read in only those breakpoints.
<rdar://problem/12611863>
llvm-svn: 281273
mode in lldb works. I've been discussing this with Jim Ingham,
Greg Clayton, and Kate Stone for the past week or two.
Previously lldb would print three source lines (centered on the
line table entry line for the current line) followed by the assembly.
It would print the context information (module`function + offset)
before those three lines of source.
Now lldb will print up to two lines before/after the line table
entry. It prints two '*' characters for the line table line to
make it clear what line is showing assembly. There is one line of
whitespace before/after the source lines so the separation between
source & assembly is clearer. I don't print the context line
(module`function + offset). I stop printing context lines if it's
a different line table entry, or if it's a source line I've already
printed as context to another source line. If I have two line table
entries one after another for the same source line (I get these often
with clang - with different column information in them), I only print
the source line once.
I'm also using the target.process.thread.step-avoid-regexp setting
(which keeps you from stepping into STL functions that have been inlined
into your own code) and avoid printing any source lines from functions
that match that regexp.
When lldb disassembles into a new function, it will try to find the
declaration line # for the function and print all of the source lines
between the decl and the first line table entry (usually a { curly brace)
so we have a good chance of including the arguments, at least with the
debug info emitted by clang.
Finally, the # of source lines of context to show has been separated
from whether we're doing mixed source & assembly or not. Previously
specifying 0 lines of context would turn off mixed source & assembly.
I think there's room for improvement, and maybe some bugs I haven't
found yet, but it's in good enough shape to upstream and iterate at
this point.
I'm not sure how best to indicate which source line is the actual line
table # versus context lines. I'm using '**' right now. Both Kate
and Greg had the initial idea to reuse '->' (normally used to indicate
"currently executing source line") - I tried it but I wasn't thrilled,
I'm too used to the established meaning of ->.
Greg had the interesting idea of avoiding context source lines only
in two line table entries in the same source file. So we'd print
two lines before & after a source line, and then the next line table
entry (if it was on the next source line after those two context lines)
we'd display only the following two lines -- the previous two had just
been printed. If an inline source line was printed between these two,
though, we'd print the context lines for both of them. It's an
interesting idea, and I want to see how it works with both -O0 and -O3
codegen where we have different amounts of inlining.
<rdar://problem/27961419>
llvm-svn: 280906
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
MSVC emits an error when one uses a const variable in a lambda without
capturing it.
gcc and clang don't emit an error in this scenario.
llvm-svn: 280707
When a process stops due to a crash, we get the crashing instruction and the
crashing memory location (if there is one). From the user's perspective it is
often unclear what the reason for the crash is in a symbolic sense.
To address this, I have added new fuctionality to StackFrame to parse the
disassembly and reconstruct the sequence of dereferneces and offsets that were
applied to a known variable (or fuction retrn value) to obtain the invalid
pointer.
This makes use of enhancements in the disassembler, as well as new information
provided by the DWARF expression infrastructure, and is exposed through a
"frame diagnose" command. It is also used to provide symbolic information, when
available, in the event of a crash.
The algorithm is very rudimentary, and it needs a bunch of work, including
- better parsing for assembly, preferably with help from LLVM
- support for non-Apple platforms
- cleanup of the algorithm core, preferably to make it all work in terms of
Operands instead of register/offset pairs
- improvement of the GetExpressioPath() logic to make prettier expression
paths, and
- better handling of vtables.
I welcome all suggestios, improvements, and testcases.
llvm-svn: 280692
easier to scan a set of options with a relatively large number of positional
arguments. This commit standardizes their formatting throughout LLDB and
applies surrounding directives to exempt them from being formatted by
clang-format.
These kinds of exemptions should be rare cases that benefit significantly
from alternative formatting. They also imply a long-term obligation to
maintain their format since the automated tools will not do so.
llvm-svn: 279882
Zachary Turner