Instead of using the SCCP homegrown one. We should eventually
make the private SCCP version disappear, but that wont' be today.
PR33143 tracks this issue.
Add braces for consistency while here. No functional change intended.
llvm-svn: 303706
Coverage instrumentation has an optimization not to instrument extra
blocks, if the pass is already "accounted for" by a
successor/predecessor basic block.
However (https://github.com/google/sanitizers/issues/783) this
reasoning may become circular, which stops valid paths from having
coverage.
In the worst case this can cause fuzzing to stop working entirely.
This change simplifies logic to something which trivially can not have
such circular reasoning, as losing valid paths does not seem like a
good trade-off for a ~15% decrease in the # of instrumented basic blocks.
llvm-svn: 303698
C++14 added user-defined literal support for complex numbers so that you can
write something like "complex<double> val = 2i". However, there is an existing
GNU extension supporting this syntax and interpreting the result as a _Complex
type.
This changes parsing so that such literals are interpreted in terms of C++14's
operators if an overload is present but otherwise falls back to the original
GNU extension.
llvm-svn: 303694
This fixes 17 of the 41 -verify-machineinstrs test failures identified in PR33045
Differential Revision: https://reviews.llvm.org/D33451
llvm-svn: 303691
Summary:
Promoting Alloca to Vector and Promoting Alloca to LDS are two independent handling of Alloca and should not affect each other.
As a result, we should not give up promoting to vector if there is not enough LDS. This patch factors out the local memory usage
related checking out and replace it after the calling convention checking.
Reviewer:
arsenm
Differential Revision:
http://reviews.llvm.org/D33139
llvm-svn: 303684
Perform DAG combine:
and (srl x, c), mask => shl (bfe x, nb + c, mask >> nb), nb
Where nb is a number of trailing zeroes in mask.
It replaces two instructions with two and BFE is generally a more
expensive one. However this is only done if we are selecting a byte
or word at an aligned boundary which results in a proper SDWA
operand pattern. It is only done if SDWA is supported.
TODO: improve SDWA pass to actually convert this pattern. It is not
done now because we have an immediate in the instruction, which has
be moved into a VGPR.
Differential Revision: https://reviews.llvm.org/D33455
llvm-svn: 303681
Summary:
A temporary workaround for PR32780 - rematerialized instructions accessing the same promoted global through different constant pool entries.
The patch turns off the globals promotion optimization leaving all its code in place, so that it can be easily turned on once PR32780 is fixed.
Since this is a miscompilation issue causing generation of misbehaving code, and the problem is very subtle, the patch might be valuable enough to get into 4.0.1.
Reviewers: efriedma, jmolloy
Reviewed By: efriedma
Subscribers: aemerson, javed.absar, llvm-commits, rengolin, asl, tstellar
Differential Revision: https://reviews.llvm.org/D33446
llvm-svn: 303679
When writing field list records, we would construct a temporary
type serializer that shared a bump ptr allocator with the rest
of the application, so anything allocated from here would live
forever. Furthermore, this temporary serializer had all the
properties of a full blown serializer including record hashing
and de-duplication.
These features are required when you're merging multiple type
streams into each other, because different streams may contain
identical records, but records from the same type stream will
never collide with each other. So all of this hashing was
unnecessary.
To solve this, two fixes are made:
1) The temporary serializer keeps its own bump ptr allocator
instead of sharing a global one. When it's finished, all of
its memory is freed.
2) Instead of using the same temporary serializer for the life
of an entire type stream, we use it only for the life of a single
field list record and delete it when the field list record is
completed. This way the hash table will not grow as other
records from the same type stream get inserted. Further improvements
could eliminate hashing entirely from this codepath.
This reduces the link time by 85% in my test, from 1 minute to 9
seconds.
llvm-svn: 303676
Summary:
This is a first patch for GSoC project, bash-completion for clang.
To use this on bash, please run `source clang/utils/bash-autocomplete.sh`.
bash-autocomplete.sh is code for bash-completion.
Simple flag completion and path completion is available in this patch.
Reviewers: teemperor, v.g.vassilev, ruiu, Bigcheese, efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33237
llvm-svn: 303670
Summary:
First, StringMap uses llvm::HashString, which is only good for short
identifiers and really bad for large blobs of binary data like type
records. Moving to `DenseMap<StringRef, TypeIndex>` with some tricks for
memory allocation fixes that.
Unfortunately, that didn't buy very much performance. Profiling showed
that we spend a long time during DenseMap growth rehashing existing
entries. Also, in general, DenseMap is faster when the keys are small.
This change takes that to the logical conclusion by introducing a small
wrapper value type around a pointer to key data. The key data contains a
precomputed hash, the original record data (pointer and size), and the
type index, which is the "value" of our original map.
This reduces the time to produce llvm-as.exe and llvm-as.pdb from ~15s
on my machine to 3.5s, which is about a 4x improvement.
Reviewers: zturner, inglorion, ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33428
llvm-svn: 303665
This is just a cleanup. Also, it adds checking that ByteCount is aligned to 4.
Reviewers: arsenm, nhaehnle, tstellarAMD
Subscribers: kzhuravl, wdng, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D28994
llvm-svn: 303658
Actually, to identify external symbols, we need to check for
*either* non-null Value.SymbolName *or* a SymType of
Symbol::ST_Unknown.
The former may happen for symbols not known to the JIT at all
(e.g. defined in a native library), while the latter happens
for symbols known to the JIT, but defined in a different module.
Fixed several regressions on big-endian ppc64.
llvm-svn: 303655
Summary:
Before this change, AttributeLists stored a pair of index and
AttributeSet. This is memory efficient if most arguments do not have
attributes. However, it requires doing a search over the pairs to test
an argument or function attribute. Profiling shows that this loop was
0.76% of the time in 'opt -O2' of sqlite3.c, because LLVM constantly
tests values for nullability.
This was worth about 2.5% of mid-level optimization cycles on the
sqlite3 amalgamation. Here are the full perf results:
https://reviews.llvm.org/P7995
Here are just the before and after cycle counts:
```
$ perf stat -r 5 ./opt_before -O2 sqlite3.bc -o /dev/null
13,274,181,184 cycles # 3.047 GHz ( +- 0.28% )
$ perf stat -r 5 ./opt_after -O2 sqlite3.bc -o /dev/null
12,906,927,263 cycles # 3.043 GHz ( +- 0.51% )
```
This patch *does not* change the indices used to query attributes, as
requested by reviewers. Tracking whether an index is usable for array
indexing is a huge pain that affects many of the internal APIs, so it
would be good to come back later and do a cleanup to remove this
internal adjustment.
Reviewers: pete, chandlerc
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D32819
llvm-svn: 303654
shl (or|add x, c2), c1 => or|add (shl x, c1), (c2 << c1)
This allows to fold a constant into an address in some cases as
well as to eliminate second shift if the expression is used as
an address and second shift is a result of a GEP.
Differential Revision: https://reviews.llvm.org/D33432
llvm-svn: 303641
The PowerPC part of processRelocationRef currently assumes that external
symbols can be identified by checking for SymType == SymbolRef::ST_Unknown.
This is actually incorrect in some cases, causing relocation overflows to
be mis-detected. The correct check is to test whether Value.SymbolName
is null.
Includes test case. Note that it is a bit tricky to replicate the exact
condition that triggers the bug in a test case. The one included here
seems to fail reliably (before the fix) across different operating
system versions on Power, but it still makes a few assumptions (called
out in the test case comments).
Also add ppc64le platform name to the supported list in the lit.local.cfg
files for the MCJIT and OrcMCJIT directories, since those tests were
currently not run at all.
Fixes PR32650.
Reviewer: hfinkel
Differential Revision: https://reviews.llvm.org/D33402
llvm-svn: 303637
This patch builds over https://reviews.llvm.org/rL303349 and replaces
the use of the condition only if it is safe to do so.
We should not blindly RAUW the condition if experimental.guard or assume
is a use of that
condition. This is because LVI may have used the guard/assume to
identify the
value of the condition, and RUAWing will fold the guard/assume and uses
before the guards/assumes.
Reviewers: sanjoy, reames, trentxintong, mkazantsev
Reviewed by: sanjoy, reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33257
llvm-svn: 303633
Code in RuntimeDyldELF currently uses 32-bit temporaries to detect
whether a PPC64 relocation target is out of range. This is incorrect,
and can mis-detect overflow where the distance between relocation site
and target is close to a multiple of 4GB. Fixed by using 64-bit
temporaries.
Noticed while debugging PR32650.
Reviewer: hfinkel
Differential Revision: https://reviews.llvm.org/D33403
llvm-svn: 303632
Summary:
Added separate pseudo and real instruction for GFX9 SDWA instructions.
Currently supports only in assembler.
Depends D32493
Reviewers: vpykhtin, artem.tamazov
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D33132
llvm-svn: 303620
Summary:
This patch makes instruction fusion more aggressive by
* adding artificial edges between the successors of FirstSU and
SecondSU, similar to BaseMemOpClusterMutation::clusterNeighboringMemOps.
* updating PostGenericScheduler::tryCandidate to keep clusters together,
similar to GenericScheduler::tryCandidate.
This change increases the number of AES instruction pairs generated on
Cortex-A57 and Cortex-A72. This doesn't change code at all in
most benchmarks or general code, but we've seen improvement on kernels
using AESE/AESMC and AESD/AESIMC.
Reviewers: evandro, kristof.beyls, t.p.northover, silviu.baranga, atrick, rengolin, MatzeB
Reviewed By: evandro
Subscribers: aemerson, rengolin, MatzeB, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33230
llvm-svn: 303618
The default behavior of -Rpass-analysis=loop-vectorizer is to report only the
first reason encountered for not vectorizing, if one is found, at which time the
vectorizer aborts its handling of the loop. This patch allows multiple reasons
for not vectorizing to be identified and reported, at the potential expense of
additional compile-time, under allowExtraAnalysis which can currently be turned
on by Clang's -fsave-optimization-record and opt's -pass-remarks-missed.
Removed from LoopVectorizationLegality::canVectorize() the redundant checking
and reporting if we CantComputeNumberOfIterations, as LAI::canAnalyzeLoop() also
does that. This redundancy is caught by a lit test once multiple reasons are
reported.
Patch initially developed by Dror Barak.
Differential Revision: https://reviews.llvm.org/D33396
llvm-svn: 303613
This commit fixes a bug introduced in r301019 where optimizeLogicalImm
would replace a logical node's immediate operand that was CSE'd and
was also an operand of another node.
This commit fixes the bug by replacing the logical node instead of its
immediate operand.
rdar://problem/32295276
llvm-svn: 303607
Summary:
Add Max ModFlagBehavior, which can be used to take the max of two
module flag values when merging modules. Use it for the PIE and PIC
levels.
This avoids an error when we try to import from a module built -fpic
into a module built -fPIC, for example. For both PIE and PIC levels,
this will be legal, since the code generation gets more conservative
as the level is increased. Therefore we can take the max instead of
somehow trying to block importing between modules compiled with
different levels.
Reviewers: tmsriram, pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33418
llvm-svn: 303590
When presented with an icmp/select pair, we can end up asking what would happen
if we replaced one constant with another in an instruction. This is a mistake,
while non-constant Values could become a constant, constants cannot change and
trying to do so can lead to completely invalid IR (a GEP referencing a
non-existant field in the original case).
llvm-svn: 303580
Previous algotirhm assumed that types and ids are in a single
unified stream. For inputs that come from object files, this
is the case. But if the input is already a PDB, or is the result
of a previous merge, then the types and ids will already have
been split up, in which case we need an algorithm that can
accept operate on independent streams of types and ids that
refer across stream boundaries to each other.
Differential Revision: https://reviews.llvm.org/D33417
llvm-svn: 303577
MachineInstructions that don't generate any code (such as
IMPLICIT_DEFs) should not generate any debug info either.
Fixes PR33107.
https://bugs.llvm.org/show_bug.cgi?id=33107
This reapplies r303566 without any modifications. The stage2 build
failures persisted even after reverting this patch, and looking back
through history, it looks like these tests are flaky.
llvm-svn: 303575
Summary:
With instrumentation profiling, when updating the VP metadata after
an inline, VP metadata on the inlined copy was inadvertantly having
all counts zeroed out. This was causing indirect calls from code inlined
during the call step to be marked as cold in the ThinLTO summaries and
not imported.
The CallerBFI needs to be passed down so that the CallSiteCount can be
computed from the profile summary info. With Sample PGO this was working
since the count is extracted from the branch weight metadata on the
call being inlined (even before we stopped looking at metadata for
non-sample PGO in r302844 this largely wasn't working for instrumentation
PGO since only promoted indirect calls would be getting inlined and have
the metadata).
Added an instrumentation PGO test and renamed the sample PGO test.
Reviewers: danielcdh, eraman
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D33389
llvm-svn: 303574
Turn expensive 64 bit shift into 32 bit if shift does not overflow int:
shl (ext x) => zext (shl x)
Differential Revision: https://reviews.llvm.org/D33367
llvm-svn: 303569
MachineInstructions that don't generate any code (such as
IMPLICIT_DEFs) should not generate any debug info either.
Fixes PR33107.
https://bugs.llvm.org/show_bug.cgi?id=33107
llvm-svn: 303566
This patch adds handling of the `micromips` and `nomicromips` attributes
passed by front-end. The patch depends on D33363.
Differential revision: https://reviews.llvm.org/D33364
llvm-svn: 303545
Re-applying now that PR32825 which was raised on the commit this fixed up is now known to have also been fixed by this commit.
Original commit message:
Multiple ldr pseudoinstructions with the same constant value will
reuse the same constant pool entry. However, if the constant pool
is explicitly flushed with a .ltorg directive, we should not try
to reference constants in the previous pool any longer, since they
may be out of range.
This fixes assembling hand-written assembler source which repeatedly
loads the same constant value, across a binary size larger than the
pc-relative fixup range for ldr instructions (4096 bytes). Such
assembler source already uses explicit .ltorg instructions to emit
constant pools with regular intervals. However if we try to reuse
constants emitted in earlier pools, they end up out of range.
This makes the output of the testcase match what binutils gas does
(prior to this patch, it would fail to assemble).
Differential Revision: https://reviews.llvm.org/D32847
llvm-svn: 303540
Re-applying now that the open bug on this commit, PR32825, is known to be fixed.
Original commit message:
Summary: This patch returns the same label if the CP entry with the same value has been created.
Reviewers: eli.friedman, rengolin, jmolloy
Subscribers: majnemer, jmolloy, llvm-commits
Differential Revision: https://reviews.llvm.org/D25804
llvm-svn: 303539
This reverts commit r302416. This was a fixup for r286006, which has now been reverted so this doesn't apply (either in concept or in code).
This commit itself has no problems, but the underlying issue it was fixing has now disappeared from the codebase.
llvm-svn: 303536
llvm-symbolizer would fail to symbolize addresses in unlinked object
files when handling .dwo file data because the addresses would not be
relocated in the same way as the ranges in the skeleton CU in the object
file.
Fix that so object files can be symbolized the same as executables.
llvm-svn: 303532
This is a re-application of a r303497 that was reverted in r303498.
I thought it had broken a bot when it had not (the breakage did not
go away with the revert).
This change makes the split between the "exact" backedge taken count
and the "maximum" backedge taken count a bit more obvious. Both of
these are upper bounds on the number of times the loop header
executes (since SCEV does not account for most kinds of abnormal
control flow), but the latter is guaranteed to be a constant.
There were a few places where the max backedge taken count *was* a
non-constant; I've changed those to compute constants instead.
At this point, I'm not sure if the constant max backedge count can be
computed by calling `getUnsignedRange(Exact).getUnsignedMax()` without
losing precision. If it can, we can simplify even further by making
`getMaxBackedgeTakenCount` a thin wrapper around
`getBackedgeTakenCount` and `getUnsignedRange`.
llvm-svn: 303531
Summary:
Fix naming conventions and const correctness.
This completes the changes made in rL303029.
Patch by Yoav Ben-Shalom.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33377
llvm-svn: 303529
Otherwise we end up miscompiling, transforming:
define i8 @tinky() {
%sext = sext i1 1 to i16
%hibit = lshr i16 %sext, 15
%tr = trunc i16 %hibit to i8
ret i8 %tr
}
into:
%sext = sext i1 1 to i8
ret i8 %sext
and the first get folded to ret i8 1, while the second gets folded
to ret i8 -1.
Eventually we should get rid of this transform entirely, but for now,
this at least fixes a know correctness bug.
Differential Revision: https://reviews.llvm.org/D33338
llvm-svn: 303513
PPC backend eliminates compare instructions by using record-form instructions in PPCInstrInfo::optimizeCompareInstr, which is called from peephole optimization pass.
This patch improves this optimization to eliminate more compare instructions in two types of common case.
- comparison against a constant 1 or -1
The record-form instructions set CR bit based on signed comparison against 0. So, the current implementation does not exploit the record-form instruction for comparison against a non-zero constant.
This patch enables record-form optimization for constant of 1 or -1 if possible; it changes the condition "greater than -1" into "greater than or equal to 0" and "less than 1" into "less than or equal to 0".
With this patch, compare can be eliminated in the following code sequence, as an example.
uint64_t a, b;
if ((a | b) & 0x8000000000000000ull) { ... }
else { ... }
- andi for 32-bit comparison on PPC64
Since record-form instructions execute 64-bit signed comparison and so we have limitation in eliminating 32-bit comparison, i.e. with cmplwi, using the record-form. The original implementation already has such checks but andi. is not recognized as an instruction which executes implicit zero extension and hence safe to convert into record-form if used for equality check.
%1 = and i32 %a, 10
%2 = icmp ne i32 %1, 0
br i1 %2, label %foo, label %bar
In this simple example, LLVM generates andi. + cmplwi + beq on PPC64.
This patch make it possible to eliminate the cmplwi for this case.
I added andi. for optimization targets if it is safe to do so.
Differential Revision: https://reviews.llvm.org/D30081
llvm-svn: 303500
This change makes the split between the "exact" backedge taken count
and the "maximum" backedge taken count a bit more obvious. Both of
these are upper bounds on the number of times the loop header
executes (since SCEV does not account for most kinds of abnormal
control flow), but the latter is guaranteed to be a constant.
There were a few places where the max backedge taken count *was* a
non-constant; I've changed those to compute constants instead.
At this point, I'm not sure if the constant max backedge count can be
computed by calling `getUnsignedRange(Exact).getUnsignedMax()` without
losing precision. If it can, we can simplify even further by making
`getMaxBackedgeTakenCount` a thin wrapper around
`getBackedgeTakenCount` and `getUnsignedRange`.
llvm-svn: 303497
Summary: This allows pthread_self to be pulled out of a loop by LICM.
Reviewers: hfinkel, arsenm, davide
Reviewed By: davide
Subscribers: davide, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D32782
llvm-svn: 303495
This is split up into two commits.
The will create the DEF parser in LLVM.
Check the following commit to see the removal from LLD
Reviewers: ruiu
Differential Revision: https://reviews.llvm.org/D32689
llvm-svn: 303490
Summary: Added the new modules in the Object/ folder. Updated the
llvm-cvtres interface as well, and added additional tests.
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33180
llvm-svn: 303480
In the case where we have an operand defined by a lod of the
same memory location. Historically this was a VariableExpression
because we wanted to make sure they ended up in the same class,
but if we create the right expression, they end up in the same
class anyway.
Fixes PR32897. Thanks to Dan for the detailed discussion and the
fix suggestion.
llvm-svn: 303475
This was here because we don't want to switch leaders too much,
in order to avoid fixpoint(ing) issue, but it's not sure if it
matters in practice.
A first step towards fixing PR32897.
llvm-svn: 303473
This reapplies commit r303438 modified to not verify cross-imported
bitcode in FunctionImporter.
rdar://problem/31233625
Differential Revision: https://reviews.llvm.org/D33370
llvm-svn: 303470
Refactor the strlen optimization code to work for both strlen and wcslen.
This especially helps with programs in the wild where people pass
L"string"s to const std::wstring& function parameters and the wstring
constructor gets inlined.
This also fixes a lingerind API problem/bug in getConstantStringInfo()
where zeroinitializers would always give you an empty string (without a
length) back regardless of the actual length of the initializer which
did not work well in the TrimAtNul==false causing the PR mentioned
below.
Note that the fixed getConstantStringInfo() needed fixes to SelectionDAG
memcpy lowering and may lead to some cases for out-of-bounds
zeroinitializer accesses not getting optimized anymore. So some code
with UB may produce out of bound memory reads now instead of just
producing zeros.
The refactoring "accidentally" fixes http://llvm.org/PR32124
Differential Revision: https://reviews.llvm.org/D32839
llvm-svn: 303461
getParamAlignment expects an argument number, not an AttributeList
index.
Johan Englan, who works on LDC, found this bug and told me about it off
list.
llvm-svn: 303458
This is a complicated bug involving two issues:
1. What do we do with phi nodes when we prove all arguments are not
live?
2. When is it safe to use value leaders to determine if we can ignore
an argumnet?
llvm-svn: 303453
This was originally reverted because it was a breaking a bunch
of bots and the breakage was not surfacing on Windows. After much
head-scratching this was ultimately traced back to a bug in the
lit test runner related to its pipe handling. Now that the bug
in lit is fixed, Windows correctly reports these test failures,
and as such I have finally (hopefully) fixed all of them in this
patch.
llvm-svn: 303446
Summary:
NewGVN: Handle equivalence between phi of ops and op of phis.
This makes our GVN mostly-complete. It would be complete, modulo some
deliberate choices we make. This means it detects roughly all herband
equivalences in polynomial time, including cases notoriously hard for
other GVN's to detect. It also detects a very large swath of the
cases we currently rely on instcombine to detect that involve folding
upwards through phis.
Fixes PR 31125, 31463, PR 31868
Reviewers: davide
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D32151
llvm-svn: 303444
Summary:
While this makes some case better and some case worse - so it's unclear if it is a worthy combine just by itself - this is a useful canonicalisation.
As per discussion in D32756 .
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32916
llvm-svn: 303441
Summary:
This NFC simply refactors the return value of LoopIdiomRecognize::isLegalStore() from bool to an enumeration, and
removes the return-through-parameter mechanism that the function was using. This function is constructed such that it will
only ever recognize a single store idiom (memset, memset_pattern, or memcpy), and never a combination of these. As such it
makes much more sense for the return value to be the single idiom that the store matches, rather than
having a separate argument-return for each idiom -- it's cleaner, and makes it clearer that
only a single idiom can be matched.
Patch by Daniel Neilson!
Reviewers: anna, sanjoy, davide, haicheng
Reviewed By: anna, haicheng
Subscribers: haicheng, mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D33359
llvm-svn: 303434
Summary:
This patch adds udiv/sdiv/urem/srem/udivrem/sdivrem methods that can divide by a uint64_t. This makes division consistent with all the other arithmetic operations.
This modifies the interface of the divide helper method to work on raw arrays instead of APInts. This way we can pass the uint64_t in for the RHS without wrapping it in an APInt. This required moving all the Quotient and Remainder allocation handling up to the callers. For udiv/urem this was as simple as just creating the Quotient/Remainder with the right size when they were declared. For udivrem we have to rely on reallocate not changing the contents of the variable LHS or RHS is aliased with the Quotient or Remainder APInts. We also have to zero the upper bits of Remainder and Quotient that divide doesn't write to if lhsWords/rhsWords is smaller than the width.
I've update the toString method to use the new udivrem.
Reviewers: hans, dblaikie, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33310
llvm-svn: 303431
This patch defines the i1 type as illegal in the X86 backend for AVX512.
For DAG operations on <N x i1> types (build vector, extract vector element, ...) i8 is used, and should be truncated/extended.
This should produce better scalar code for i1 types since GPRs will be used instead of mask registers.
Differential Revision: https://reviews.llvm.org/D32273
llvm-svn: 303421
Summary:
This causes them to be re-computed more often than necessary but resolves
objections that were raised post-commit on r301750.
Reviewers: qcolombet, ab, t.p.northover, rovka, kristof.beyls
Reviewed By: qcolombet
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32861
llvm-svn: 303418
This is a squash of ~5 reverts of, well, pretty much everything
I did today. Something is seriously broken with lit on Windows
right now, and as a result assertions that fire in tests are
triggering failures. I've been breaking non-Windows bots all
day which has seriously confused me because all my tests have
been passing, and after running lit with -a to view the output
even on successful runs, I find out that the tool is crashing
and yet lit is still reporting it as a success!
At this point I don't even know where to start, so rather than
leave the tree broken for who knows how long, I will get this
back to green, and then once lit is fixed on Windows, hopefully
hopefully fix the remaining set of problems for real.
llvm-svn: 303409
We were using a BumpPtrAllocator to allocate stable storage for
a record, then trying to insert that into a hash table. If a
collision occurred, the bytes were never inserted and the
allocation was unnecessary. At the cost of an extra hash
computation, check first if it exists, and only if it does do
we allocate and insert.
llvm-svn: 303407
Apparently this was always broken, but previously we were more
graceful about it and we would print "unknown udt" if we couldn't
find the type index, whereas now we just segfault because we
assume it's valid. But this exposed a real bug, which is that
we weren't looking in the right place. So fix that, and also
fix this crash at the same time.
llvm-svn: 303397
pruneSubRegValues() needs to remove subregister ranges starting at
instructions that later get removed by eraseInstrs(). It missed to check
one case in which eraseInstrs() would remove an instruction.
Fixes http://llvm.org/PR32688
llvm-svn: 303396
We can have cycles between PHIs and this causes singleReachablePhi()
to call itself indefintely (until we run out of stack). The proper
solution would be that of computing SCCs, but it's not worth for
now, so just keep a visited set and give up when we find a cycle.
Thanks to Dan for the discussion/help with this.
Fixes PR33014.
llvm-svn: 303393
Merging PDBs is a feature that will be used heavily by
the linker. The functionality already exists but does not
have deep test coverage because it's not easily exposed through
any tools. This patch aims to address that by adding the
ability to merge PDBs via llvm-pdbdump. It takes arbitrarily
many PDBs and outputs a single PDB.
Using this new functionality, a test is added for merging
type records. Future patches will add the ability to merge
symbol records, module information, etc.
llvm-svn: 303389
Right now we have multiple notions of things that represent collections of
types. Most commonly used are TypeDatabase, which is supposed to keep
mappings from TypeIndex to type name when reading a type stream, which
happens when reading PDBs. And also TypeTableBuilder, which is used to
build up a collection of types dynamically which we will later serialize
(i.e. when writing PDBs).
But often you just want to do some operation on a collection of types, and
you may want to do the same operation on any kind of collection. For
example, you might want to merge two TypeTableBuilders or you might want
to merge two type streams that you loaded from various files.
This dichotomy between reading and writing is responsible for a lot of the
existing code duplication and overlapping responsibilities in the existing
CodeView library classes. For example, after building up a
TypeTableBuilder with a bunch of type records, if we want to dump it we
have to re-invent a bunch of extra glue because our dumper takes a
TypeDatabase or a CVTypeArray, which are both incompatible with
TypeTableBuilder.
This patch introduces an abstract base class called TypeCollection which
is shared between the various type collection like things. Wherever we
previously stored a TypeDatabase& in some common class, we now store a
TypeCollection&.
The advantage of this is that all the details of how the collection are
implemented, such as lazy deserialization of partial type streams, is
completely transparent and you can just treat any collection of types the
same regardless of where it came from.
Differential Revision: https://reviews.llvm.org/D33293
llvm-svn: 303388
Also, fix the old-style capitalization of the related functions
and move them to the 'private' section of the class since they
are just helpers of the visit* functions.
As shown in the post-commit comments for D32143, we are missing
folds for xor-of-icmps.
llvm-svn: 303381
This also reverts follow-ups r303292 and r303298.
It broke some Chromium tests under MSan, and apparently also internal
tests at Google.
llvm-svn: 303369
Summary:
Implements PR889
Removing the virtual table pointer from Value saves 1% of RSS when doing
LTO of llc on Linux. The impact on time was positive, but too noisy to
conclusively say that performance improved. Here is a link to the
spreadsheet with the original data:
https://docs.google.com/spreadsheets/d/1F4FHir0qYnV0MEp2sYYp_BuvnJgWlWPhWOwZ6LbW7W4/edit?usp=sharing
This change makes it invalid to directly delete a Value, User, or
Instruction pointer. Instead, such code can be rewritten to a null check
and a call Value::deleteValue(). Value objects tend to have their
lifetimes managed through iplist, so for the most part, this isn't a big
deal. However, there are some places where LLVM deletes values, and
those places had to be migrated to deleteValue. I have also created
llvm::unique_value, which has a custom deleter, so it can be used in
place of std::unique_ptr<Value>.
I had to add the "DerivedUser" Deleter escape hatch for MemorySSA, which
derives from User outside of lib/IR. Code in IR cannot include MemorySSA
headers or call the MemoryAccess object destructors without introducing
a circular dependency, so we need some level of indirection.
Unfortunately, no class derived from User may have any virtual methods,
because adding a virtual method would break User::getHungOffOperands(),
which assumes that it can find the use list immediately prior to the
User object. I've added a static_assert to the appropriate OperandTraits
templates to help people avoid this trap.
Reviewers: chandlerc, mehdi_amini, pete, dberlin, george.burgess.iv
Reviewed By: chandlerc
Subscribers: krytarowski, eraman, george.burgess.iv, mzolotukhin, Prazek, nlewycky, hans, inglorion, pcc, tejohnson, dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D31261
llvm-svn: 303362
The testcase in PR33077 generates a LSR Use Formula with two SCEVAddRecExprs for the same
loop. Such uncommon formula will become non-canonical after GenerateTruncates adds sign
extension to the ScaledReg of the Formula, and it will break the assertion that every
Formula to be inserted is canonical.
The fix is to call canonicalize for the raw Formula generated by GenerateTruncates
before inserting it.
llvm-svn: 303361
This provides a new way to access the TargetMachine through
TargetPassConfig, as a dependency.
The patterns replaced here are:
* Passes handling a null TargetMachine call
`getAnalysisIfAvailable<TargetPassConfig>`.
* Passes not handling a null TargetMachine
`addRequired<TargetPassConfig>` and call
`getAnalysis<TargetPassConfig>`.
* MachineFunctionPasses now use MF.getTarget().
* Remove all the TargetMachine constructors.
* Remove INITIALIZE_TM_PASS.
This fixes a crash when running `llc -start-before prologepilog`.
PEI needs StackProtector, which gets constructed without a TargetMachine
by the pass manager. The StackProtector pass doesn't handle the case
where there is no TargetMachine, so it segfaults.
Related to PR30324.
Differential Revision: https://reviews.llvm.org/D33222
llvm-svn: 303360
1) Until now I'd never seen a valid PDB where the DBI stream and
the PDB Stream disagreed on the "Age" field. Because of that,
we had code to assert that they matched. Recently though I was
given a PDB where they disagreed, so this assumption has proven
to be incorrect. Remove this check.
2) We were walking the entire list of hash values for types up front
and then throwing away the values. For large PDBs this was a
significant slow down. Remove this.
With this patch, I can dump the list of all compilands from a
1.5GB PDB file in just a few seconds.
llvm-svn: 303351
Summary:
We have a bug when RAUWing the condition if experimental.guard or assumes is a use of that
condition. This is because LazyValueInfo may have used the guards/assumes to identify the
value of the condition at the end of the block. RAUW replaces the uses
at the guard/assume as well as uses before the guard/assume. Both of
these are incorrect.
For now, disable RAUW for conditions and fix the logic as a next
step: https://reviews.llvm.org/D33257
Reviewers: sanjoy, reames, trentxintong
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33279
llvm-svn: 303349
Summary:
There should be no intesection between SDWA operands and potential MIs. E.g.:
```
v_and_b32 v0, 0xff, v1 -> src:v1 sel:BYTE_0
v_and_b32 v2, 0xff, v0 -> src:v0 sel:BYTE_0
v_add_u32 v3, v4, v2
```
In that example it is possible that we would fold 2nd instruction into 3rd (v_add_u32_sdwa) and then try to fold 1st instruction into 2nd (that was already destroyed). So if SDWAOperand is also a potential MI then do not apply it.
Reviewers: vpykhtin, arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D32804
llvm-svn: 303347
Summary:
As of this patch, 1018 out of 3938 rules are currently imported.
Depends on D32275
Reviewers: qcolombet, kristof.beyls, rovka, t.p.northover, ab, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: dberris, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32278
The previous commit failed on test-suite/Bitcode/simd_ops/AArch64_halide_runtime.bc
because isImmOperandEqual() assumed MO was a register operand and that's not
always true.
llvm-svn: 303341
Replace two places that duplicate the code of isLoopInvariant method with
the invocation of this method.
Differential Revision: https://reviews.llvm.org/D33313
llvm-svn: 303336
We do not need to store relocation width field.
Patch removes relative code, that simplifies implementation.
Differential revision: https://reviews.llvm.org/D33274
llvm-svn: 303335
According to Intel's Optimization Reference Manual for SNB+:
" For LEA instructions with three source operands and some specific situations, instruction latency has increased to 3 cycles, and must
dispatch via port 1:
- LEA that has all three source operands: base, index, and offset
- LEA that uses base and index registers where the base is EBP, RBP,or R13
- LEA that uses RIP relative addressing mode
- LEA that uses 16-bit addressing mode "
This patch currently handles the first 2 cases only.
Differential Revision: https://reviews.llvm.org/D32277
llvm-svn: 303333
I revisited Decompressor API (issue with it was triggered during D32865 review)
and found it is probably provides more then we really need.
Issue was about next method's signature:
Error decompress(SmallString<32> &Out);
It is too strict. At first I wanted to change it to decompress(SmallVectorImpl<char> &Out),
but then found it is still not flexible because sticks to SmallVector.
During reviews was suggested to use templating to simplify code. Patch do that.
Differential revision: https://reviews.llvm.org/D33200
llvm-svn: 303331
The probability of edge coming to unreachable block should be as low as possible.
The change reduces the probability to minimal value greater than zero.
The bug https://bugs.llvm.org/show_bug.cgi?id=32214 show the example when
the probability of edge coming to unreachable block is greater than for edge
coming to out of the loop and it causes incorrect loop rotation.
Please note that with this change the behavior of unreachable heuristic is a bit different
than others. Specifically, before this change the sum of probabilities
coming to unreachable blocks have the same weight for all branches
(it was just split over all edges of this block coming to unreachable blocks).
With this change it might be slightly different but not to much due to probability of
taken branch to unreachable block is really small.
Reviewers: chandlerc, sanjoy, vsk, congh, junbuml, davidxl, dexonsmith
Reviewed By: chandlerc, dexonsmith
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D30633
llvm-svn: 303327
compatible target triple
Currently, an assertion fails in ThinLTOCodeGenerator::addModule when
the target triple of the module being added doesn't match that of the
one stored in TMBuilder. This patch relaxes the constraint and makes
changes to allow target triples that only differ in their version
numbers on Apple platforms, similarly to what r228999 did.
rdar://problem/30133904
Differential Revision: https://reviews.llvm.org/D33291
llvm-svn: 303326
Summary:
There are several places in the codebase that try to calculate a maximum value in a Statistic object. We currently do this in one of two ways:
MaxNumFoo = std::max(MaxNumFoo, NumFoo);
or
MaxNumFoo = (MaxNumFoo > NumFoo) ? MaxNumFoo : NumFoo;
The first version reads from MaxNumFoo one time and uncontionally rwrites to it. The second version possibly reads it twice depending on the result of the first compare. But we have no way of knowing if the value was changed by another thread between the reads and the writes.
This patch adds a method to the Statistic object that can ensure that we only store if our value is the max and the previous max didn't change after we read it. If it changed we'll recheck if our value should still be the max or not and try again.
This spawned from an audit I'm trying to do of all places we uses the implicit conversion to unsigned on the Statistics objects. See my previous thread on llvm-dev https://groups.google.com/forum/#!topic/llvm-dev/yfvxiorKrDQ
Reviewers: dberlin, chandlerc, hfinkel, dblaikie
Reviewed By: chandlerc
Subscribers: llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D33301
llvm-svn: 303318
I believe this technically fixes a multithreaded race condition in this code. But my primary concern was as part of looking at removing the ability to treat Statistics like a plain unsigned. There are many weird operations on Statistics in the codebase.
llvm-svn: 303314
The missing optimization for xor-of-icmps still needs to be added, but by
being more efficient (not generating unnecessary logic ops with constants)
we avoid the bug.
See discussion in post-commit comments:
https://reviews.llvm.org/D32143
llvm-svn: 303312
As noted in the post-commit comments in D32143, we should be
catching the constant operand cases sooner to be more efficient
and less likely to expose a missing fold.
llvm-svn: 303309
Partially implement callee-side for arguments and return values.
byval doesn't work properly, and most likely sret or other on-stack
return values most as well.
llvm-svn: 303308
When legalizing vector operations on vNi128, they will be split to v1i128
because that is a legal type on ppc64, but then the compiler will crash in
selection dag because it fails to select for these operations. This patch fixes
shift operations. Logical shift right and left shift can be performed in the
vector unit, but algebraic shift right requires being split.
Differential Revision: https://reviews.llvm.org/D32774
llvm-svn: 303307
- '-verify-mahcineinstrs' starts to complain allocatable live-in physical
registers on non-entry or non-landing-pad basic blocks.
- Refactor the XBEGIN translation to define EAX on a dedicated fallback code
path due to XABORT. Add a pseudo instruction to define EAX explicitly to
avoid add physical register live-in.
Differential Revision: https://reviews.llvm.org/D33168
llvm-svn: 303306
In order for an arbitrary callee to access an object
in a caller's stack frame, the 32-bit offset used as
the private pointer needs to be relative to the kernel's
scratch wave offset register.
Convert to this by finding the difference from the current
stack frame and scaling by the wavefront size.
llvm-svn: 303303
Check the MachinePointerInfo for whether the access is
supposed to be relative to the stack pointer.
No tests because this is used in later commits implementing
calls.
llvm-svn: 303301
Summary:
llvm-pdbdump yaml2pdb used to fail with a misleading error
message ("An I/O error occurred on the file system") if no output file
was specified. This change adds an assert to PDBFileBuilder to check
that an output file name is specified, and makes llvm-pdbdump generate
an output file name based on the input file name if no output file
name is explicitly specified.
Reviewers: amccarth, zturner
Reviewed By: zturner
Subscribers: fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D33296
llvm-svn: 303299
We already handled all of the new tests identically, but several
of those went through a lot of unnecessary processing before
getting folded.
Another motivation for grouping these cases together is that
InstCombine needs a similar fold. Currently, it handles the
'not' cases inefficiently which can lead to bugs as described
in the post-commit comments of:
https://reviews.llvm.org/D32143
llvm-svn: 303295
Often you have an array and you just want to use it. With the current
design, you have to first construct a `BinaryByteStream`, and then create
a `BinaryStreamRef` from it. Worse, the `BinaryStreamRef` holds a pointer
to the `BinaryByteStream`, so you can't just create a temporary one to
appease the compiler, you have to actually hold onto both the `ArrayRef`
as well as the `BinaryByteStream` *AND* the `BinaryStreamReader` on top of
that. This makes for very cumbersome code, often requiring one to store a
`BinaryByteStream` in a class just to circumvent this.
At the cost of some added complexity (not exposed to users, but internal
to the library), we can do better than this. This patch allows us to
construct `BinaryStreamReaders` and `BinaryStreamWriters` directly from
source data (e.g. `StringRef`, `MutableArrayRef<uint8_t>`, etc). Not only
does this reduce the amount of code you have to type and make it more
obvious how to use it, but it solves real lifetime issues when it's
inconvenient to hold onto a `BinaryByteStream` for a long time.
The additional complexity is in the form of an added layer of indirection.
Whereas before we simply stored a `BinaryStream*` in the ref, we now store
both a `BinaryStream*` **and** a `std::shared_ptr<BinaryStream>`. When
the user wants to construct a `BinaryStreamRef` directly from an
`ArrayRef` etc, we allocate an internal object that holds ownership over a
`BinaryByteStream` and forwards all calls, and store this in the
`shared_ptr<>`. This also maintains the ref semantics, as you can copy it
by value and references refer to the same underlying stream -- the one
being held in the object stored in the `shared_ptr`.
Differential Revision: https://reviews.llvm.org/D33293
llvm-svn: 303294
Summary: Moving LiveRangeShrink to x86 as this pass is mostly useful for archtectures with great register pressure.
Reviewers: MatzeB, qcolombet
Reviewed By: qcolombet
Subscribers: jholewinski, jyknight, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33294
llvm-svn: 303292
Avoids instructions to pack a vector when the source is really
a scalar being broadcast.
Also be smarter and look for per-component fneg.
Doesn't yet handle scalar from upper half of register
or other swizzles.
llvm-svn: 303291
driver-mode recognition in clang (this is because the sysctl method
always returns one and only one executable path, even for an executable
with multiple links):
Fix DynamicLibraryTest.cpp on FreeBSD and NetBSD
Summary:
After rL301562, on FreeBSD the DynamicLibrary unittests fail, because
the test uses getMainExecutable("DynamicLibraryTests", Ptr), and since
the path does not contain any slashes, retrieving the main executable
will not work.
Reimplement getMainExecutable() for FreeBSD and NetBSD using sysctl(3),
which is more reliable than fiddling with relative or absolute paths.
Also add retrieval of the original argv[] from the GoogleTest framework,
to use as a fallback for other OSes.
Reviewers: emaste, marsupial, hans, krytarowski
Reviewed By: krytarowski
Subscribers: krytarowski, llvm-commits
Differential Revision: https://reviews.llvm.org/D33171
llvm-svn: 303285
We have to check gCrashRecoveryEnabled before using __try.
In other words, SEH works too well and we ended up recovering from
crashes in implicit module builds that we weren't supposed to. Only
libclang is supposed to enable CrashRecoveryContext to allow implicit
module builds to crash.
llvm-svn: 303279
Make sure IRTranslator->MachineIRBuilder->DebugLoc doesn't
outlive the DILocation. Clear it at the end of
IRTranslator::runOnMachineFunction
llvm-svn: 303277
Summary:
It avoids problems when other libraries raise exceptions. In particular,
OutputDebugString raises an exception that the debugger is supposed to
catch and suppress. VEH kicks in first right now, and that is entirely
incorrect.
Unfortunately, GCC does not support SEH, so I've kept the old buggy VEH
codepath around. We could fix it with SetUnhandledExceptionFilter, but
that is not per-thread, so a well-behaved library shouldn't set it.
Reviewers: zturner
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33261
llvm-svn: 303274
There is often a lot of boilerplate code required to visit a type
record or type stream. The #1 use case is that you have a sequence
of bytes that represent one or more records, and you want to
deserialize each one, switch on it, and call a callback with the
deserialized record that the user can examine. Currently this
requires at least 6 lines of code:
codeview::TypeVisitorCallbackPipeline Pipeline;
Pipeline.addCallbackToPipeline(Deserializer);
Pipeline.addCallbackToPipeline(MyCallbacks);
codeview::CVTypeVisitor Visitor(Pipeline);
consumeError(Visitor.visitTypeRecord(Record));
With this patch, it becomes one line of code:
consumeError(codeview::visitTypeRecord(Record, MyCallbacks));
This is done by having the deserialization happen internally inside
of the visitTypeRecord function. Since this is occasionally not
desirable, the function provides a 3rd parameter that can be used
to change this behavior.
Hopefully this can significantly reduce the barrier to entry
to using the visitation infrastructure.
Differential Revision: https://reviews.llvm.org/D33245
llvm-svn: 303271
There should be a slight efficiency improvement from handling icmp/fcmp with one matcher and reducing duplicated code.
The larger motivation is that there are questions about how predicate canonicalization is handled, and the refactoring
should make it easier if we want to change any of that behavior.
1. As noted in the code comment, we've chosen 3 of the 16 FCMP preds as not canonical. Why those 3? It goes back to
rL32751 from what I can tell, but I'm not sure if there's a justification for that rule.
2. We currently do not canonicalize integer select conditions. Should we use the same rule that applies to branches
for selects?
3. We currently do canonicalize some FP select conditions, and those rules would conflict with the rule shown here.
Should one or both be changed?
No-functional-change-intended, but adding tests anyway because there's no coverage for most of the predicates.
Differential Revision: https://reviews.llvm.org/D33247
llvm-svn: 303261
The variables MinGPR/MinG8R were not updated properly when resetting the
offsets, which in the included testcase lead to saving the CR register
in the same location as R30.
This fixes another issue reported in PR26519.
Differential Revision: https://reviews.llvm.org/D33017
llvm-svn: 303257
It only failed on llvm-clang-x86_64-expensive-checks-win, probably
because the TableGen stuff hasn't been regenerated.
Requires a clean build.
llvm-svn: 303252
RelocAddrMap was a pair of <width, address>, where width is relocation size (4/8/x, x < 8),
and width field was never used in code.
Relocations proccessing loop had checks for width field. Does not look like DWARF parser
should do that. There is probably no much sense to validate relocations during proccessing
them in parser.
Patch removes relocation's width relative code from DWARFContext.
Differential revision: https://reviews.llvm.org/D33194
llvm-svn: 303251
Summary:
Debug info sections, (or non-SHF_ALLOC sections in general) should be
linked as if their load address was zero to emulate the behavior of the
static linker.
This bug was discovered because it was breaking lldb expression evaluation on
linux.
Reviewers: lhames
Subscribers: aprantl, eugene, clayborg, lldb-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D32899
llvm-svn: 303239
Don't allow -optimize-regalloc=false with -regalloc given for anything other
than 'fast'. The other register allocators depend on the supporting passes
added by addOptimizedRegAlloc().
Reviewers: Quentin Colombet, Matthias Braun
https://reviews.llvm.org/D33181
llvm-svn: 303238
Sorting of AddRecExprs by loop nesting does not make sense since we only invoke
the CompareSCEVComplexity for AddRecExprs that are used by one SCEV. This
guarantees that there is always a dominance relationship between them. This
patch removes the sorting by nesting which is a dead code in current usage of
this function.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D33228
llvm-svn: 303235
If we need to spill the result of the PHI instruction, we insert the spill after
all of the PHIs and EHPads, however, in a catchswitch block there is no
room to insert the spill. Make room by splitting away catchswitch into a separate
block.
Before the fix:
catch.dispatch:
%val = phi i32 [ 1, %if.then ], [ 2, %if.else ]
%switch = catchswitch within none [label %catch] unwind label %cleanuppad
After:
catch.dispatch:
%val = phi i32 [ 1, %if.then ], [ 2, %if.else ]
%tok = cleanuppad within none []
; spill goes here
cleanupret from %tok unwind label %catch.dispatch.switch
catch.dispatch.switch:
%switch = catchswitch within none [label %catch] unwind label %cleanuppad
https://reviews.llvm.org/D31846
llvm-svn: 303232
Since we use AddVectoredExceptionHandler, we get notified of
every exception that gets raised by a program. Sometimes these
are not necessarily errors though, and this can be especially
true when linking against a library that we have no control
over, and may raise an exception internally which it intends
to catch.
In particular, the Windows API OutputDebugString does exactly
this. It raises an exception inside of a __try / __except,
giving the debugger a chance to handle the exception to print
the message to the debug console.
But this doesn't interoperate nicely with our vectored exception
handler, which just sees another exception and decides that we
need to terminate the program.
Add a special case for this so that we ignore ODS exceptions
and continue normally.
Note that a better fix is to simply not use vectored exception
handlers and use SEH instead, but given that MinGW doesn't support
SEH, this is the only solution for MinGW.
Differential Revision: https://reviews.llvm.org/D33260
llvm-svn: 303219
We would eventually catch these via demanded bits and computing known bits in InstCombine,
but I think it's better to handle the simple cases as soon as possible as a matter of efficiency.
This fold allows further simplifications based on distributed ops transforms. eg:
%a = lshr i8 %x, 7
%b = or i8 %a, 2
%c = and i8 %b, 1
InstSimplify can directly fold this now:
%a = lshr i8 %x, 7
Differential Revision: https://reviews.llvm.org/D33221
llvm-svn: 303213
CTLZ idiom recognition (r303102).
Summary:
The following case:
i = 1;
if(n)
while (n >>= 1)
i++;
use(i);
Was converted to:
i = 1;
if(n)
i += builtin_ctlz(n >> 1, false);
use(i);
Which is not correct. The patch make it:
i = 1;
if(n)
i += builtin_ctlz(n >> 1, true);
use(i);
From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 303212
Update threshold based on callee's hotness only when BFI is not available.
Otherwise use only callsite's hotness. This makes it easier to reason about
hotness related threshold updates.
Differential revision: https://reviews.llvm.org/D33157
llvm-svn: 303210
Summary:
This fixes pr32392.
The lowering pipeline is:
llvm.ppc.cfence in IR -> PPC::CFENCE8 in isel -> Actual instructions in
expandPostRAPseudo.
The reason why expandPostRAPseudo is chosen is because previous passes
are likely eliminating instructions like cmpw 3, 3 (early CSE) and bne-
7, .+4 (some branch pass(s)).
Differential Revision: https://reviews.llvm.org/D32763
llvm-svn: 303205
ProfileSummaryInfo already checks whether the module has sample profile
in determining profile counts. This will also be useful in inliner to
clean up threshold updates.
llvm-svn: 303204
Summary:
In SelectionDAG, when a store is immediately chained to another store
to the same address, elide the first store as it has no observable
effects. This is causes small improvements dealing with intrinsics
lowered to stores.
Test notes:
* Many testcases overwrite store addresses multiple times and needed
minor changes, mainly making stores volatile to prevent the
optimization from optimizing the test away.
* Many X86 test cases optimized out instructions associated with
associated with va_start.
* Note that test_splat in CodeGen/AArch64/misched-stp.ll no longer has
dependencies to check and can probably be removed and potentially
replaced with another test.
Reviewers: rnk, john.brawn
Subscribers: aemerson, rengolin, qcolombet, jyknight, nemanjai, nhaehnle, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33206
llvm-svn: 303198
Using LIS can be quite expensive, so caching of calculated region
live-ins and pressure is implemented. It does two things:
1. Caches the info for the second stage when we schedule with
decreased target occupancy.
2. Tracks the basic block from top to bottom thus eliminating the
need to scan whole register file liveness at every region split
in the middle of the block.
The scheduling is now done in 3 stages instead of two, with the first
one being really a no-op and only used to collect scheduling regions
as sent by the scheduler driver.
There is no functional change to the current behavior, only compilation
speed is affected. In general computeBlockPressure() could be simplified
if we switch to backward RP tracker, because scheduler sends regions
within a block starting from the last upward. We could use a natural
order of upward tracker to seamlessly change between regions of the same
block, since live reg set of a previous tracked region would become a
live-out of the next region. That however requires fixing upward tracker
to properly account defs and uses of the same instruction as both are
contributing to the current pressure. When we converge on the produced
pressure we should be able to switch between them back and forth. In
addition, backward tracker is less expensive as it uses LIS in recede
less often than forward uses it in advance.
At the moment the worst known case compilation time has improved from 26
minutes to 8.5.
Differential Revision: https://reviews.llvm.org/D33117
llvm-svn: 303184
According to Intel's Optimization Reference Manual for SNB+:
" For LEA instructions with three source operands and some specific situations, instruction latency has increased to 3 cycles, and must
dispatch via port 1:
- LEA that has all three source operands: base, index, and offset
- LEA that uses base and index registers where the base is EBP, RBP,or R13
- LEA that uses RIP relative addressing mode
- LEA that uses 16-bit addressing mode "
This patch currently handles the first 2 cases only.
Differential Revision: https://reviews.llvm.org/D32277
llvm-svn: 303183
This factors register pressure estimation mechanism from the
GCNSchedStrategy into the forward tracker to unify interface
with other strategies and expose it to other interested phases.
Differential Revision: https://reviews.llvm.org/D33105
llvm-svn: 303179
Summary:
RewritePHIs algorithm used in building of CoroFrame inserts a placeholder
```
%placeholder = phi [%val]
```
on every edge leading to a block starting with PHI node with multiple incoming edges,
so that if one of the incoming values was spilled and need to be reloaded, we have a
place to insert a reload. We use SplitEdge helper function to split the incoming edge.
SplitEdge function does not deal with unwind edges comping into a block with an EHPad.
This patch adds an ehAwareSplitEdge function that can correctly split the unwind edge.
For landing pads, we clone the landing pad into every edge block and replace the original
landing pad with a PHI collection the values from all incoming landing pads.
For WinEH pads, we keep the original EHPad in place and insert cleanuppad/cleapret in the
edge blocks.
Reviewers: majnemer, rnk
Reviewed By: majnemer
Subscribers: EricWF, llvm-commits
Differential Revision: https://reviews.llvm.org/D31845
llvm-svn: 303172
Recommit of r303159 "[DWARF] - Use DWARFAddressRange struct instead of uint64_t pair for DWARFAddressRangesVector"
All places were shitched to use DWARFAddressRange now.
Suggested during review of D33184.
llvm-svn: 303163
The information collected when requested by -time-passes is only printed when
llvm_shutdown is called at the moment. This means that when linking against the LTO
library dynamically and using the C interface, it is not possible to see the timing
information, because llvm_shutdown cannot be called. This change modifies the LTO
code generation functions for both regular LTO and thin LTO to explicitly print and
reset the timing information.
I have tested that this works with our proprietary linker. However, as this relies
on a specific method of building and linking against the LTO library, I'm not sure
how or if this can be tested in the LLVM testsuite.
Reviewed by: mehdi_amini
Differential Revision: https://reviews.llvm.org/D32803
llvm-svn: 303152
The existing sorting order in defined CompareSCEVComplexity sorts AddRecExprs
by loop depth, but does not pay attention to dominance of loops. This can
lead us to the following buggy situation:
for (...) { // loop1
op1 = {A,+,B}
}
for (...) { // loop2
op2 = {A,+,B}
S = add op1, op2
}
In this case there is no guarantee that in operand list of S the op2 comes
before op1 (loop depth is the same, so they will be sorted just
lexicographically), so we can incorrectly treat S as a recurrence of loop1,
which is wrong.
This patch changes the sorting logic so that it places the dominated recs
before the dominating recs. This ensures that when we pick the first recurrency
in the operands order, it will be the bottom-most in terms of domination tree.
The attached test set includes some tests that produce incorrect SCEV
estimations and crashes with oldlogic.
Reviewers: sanjoy, reames, apilipenko, anna
Reviewed By: sanjoy
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33121
llvm-svn: 303148
This function gives the wrong answer on some non-ELF platforms in some
cases. The function that does the right thing lives in Mangler.h. To try to
discourage people from using this function, give it a different name.
Differential Revision: https://reviews.llvm.org/D33162
llvm-svn: 303134
Shrink-wrapping uses post-dominators to find a restore point that
post-dominates all the uses of CSR / stack.
The way dominator trees are modeled in LLVM today is that unreachable
blocks are not present in a generic dominator tree, so, an unreachable node is
dominated by anything: include/llvm/Support/GenericDomTree.h:467.
Since for post-dominators, a no-return block is considered
"unreachable", calling findNearestCommonDominator on an unreachable node
A and a non-unreachable node B, will return B, which can be false. If we
find such node, we bail out since there is no good restore point
available.
rdar://problem/30186931
llvm-svn: 303130
We don't use section-relative relocations on AArch64, so all symbols must be at
least visible to the linker (i.e. properly global or l_whatever, but not
L_whatever).
llvm-svn: 303118
There's no need (& a bit incorrect) to mask off the high bits of the
register reference when describing a simple bool value.
Reviewers: aprantl
Differential Revision: https://reviews.llvm.org/D31062
llvm-svn: 303117
ARM Neon has native support for half-sized vector registers (64 bits). This
is beneficial for example for 2D and 3D graphics. This patch adds the option
to lower MinVecRegSize from 128 via a TTI in the SLP Vectorizer.
*** Performance Analysis
This change was motivated by some internal benchmarks but it is also
beneficial on SPEC and the LLVM testsuite.
The results are with -O3 and PGO. A negative percentage is an improvement.
The testsuite was run with a sample size of 4.
** SPEC
* CFP2006/482.sphinx3 -3.34%
A pretty hot loop is SLP vectorized resulting in nice instruction reduction.
This used to be a +22% regression before rL299482.
* CFP2000/177.mesa -3.34%
* CINT2000/256.bzip2 +6.97%
My current plan is to extend the fix in rL299482 to i16 which brings the
regression down to +2.5%. There are also other problems with the codegen in
this loop so there is further room for improvement.
** LLVM testsuite
* SingleSource/Benchmarks/Misc/ReedSolomon -10.75%
There are multiple small SLP vectorizations outside the hot code. It's a bit
surprising that it adds up to 10%. Some of this may be code-layout noise.
* MultiSource/Benchmarks/VersaBench/beamformer/beamformer -8.40%
The opt-viewer screenshot can be seen at F3218284. We start at a colder store
but the tree leads us into the hottest loop.
* MultiSource/Applications/lambda-0.1.3/lambda -2.68%
* MultiSource/Benchmarks/Bullet/bullet -2.18%
This is using 3D vectors.
* SingleSource/Benchmarks/Shootout-C++/Shootout-C++-lists +6.67%
Noise, binary is unchanged.
* MultiSource/Benchmarks/Ptrdist/anagram/anagram +4.90%
There is an additional SLP in the cold code. The test runs for ~1sec and
prints out over 2000 lines. This is most likely noise.
* MultiSource/Applications/aha/aha +1.63%
* MultiSource/Applications/JM/lencod/lencod +1.41%
* SingleSource/Benchmarks/Misc/richards_benchmark +1.15%
Differential Revision: https://reviews.llvm.org/D31965
llvm-svn: 303116
This caused PR33053.
Original commit message:
> The new experimental reduction intrinsics can now be used, so I'm enabling this
> for AArch64. We will need this for SVE anyway, so it makes sense to do this for
> NEON reductions as well.
>
> The existing code to match shufflevector patterns are replaced with a direct
> lowering of the reductions to AArch64-specific nodes. Tests updated with the
> new, simpler, representation.
>
> Differential Revision: https://reviews.llvm.org/D32247
llvm-svn: 303115
We were silently ignoring any features we couldn't match up, which led to
errors in an inline asm block missing the conventional "\n\t".
llvm-svn: 303108
Summary:
The following loops should be recognized:
i = 0;
while (n) {
n = n >> 1;
i++;
body();
}
use(i);
And replaced with builtin_ctlz(n) if body() is empty or
for CPUs that have CTLZ instruction converted to countable:
for (j = 0; j < builtin_ctlz(n); j++) {
n = n >> 1;
i++;
body();
}
use(builtin_ctlz(n));
Reviewers: rengolin, joerg
Differential Revision: http://reviews.llvm.org/D32605
From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 303102
verifyMemoryCongruency() filters out trivially dead MemoryDef(s),
as we find them immediately dead, before moving from TOP to a new
congruence class.
This fixes the same problem for PHI(s) skipping MemoryPhis if all
the operands are dead.
Differential Revision: https://reviews.llvm.org/D33044
llvm-svn: 303100
Summary:
All GlobalIndirectSymbol types (not just GlobalAlias) should return
their base object.
Without this patch LTO would warn "Unable to determine comdat of
alias!" for an ifunc.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, llvm-commits
Differential Revision: https://reviews.llvm.org/D33202
llvm-svn: 303096
At O3 we are more willing to increase size if we believe it will improve
performance. The current threshold for tail-duplication of 2 instructions is
conservative, and can be relaxed at O3.
Benchmark results:
llvm test-suite:
6% improvement in aha, due to duplication of loop latch
3% improvement in hexxagon
2% slowdown in lpbench. Seems related, but couldn't completely diagnose.
Internal google benchmark:
Produces 4% improvement on internal google protocol buffer serialization
benchmarks.
Differential-Revision: https://reviews.llvm.org/D32324
llvm-svn: 303084
Follow up to D33147
NVPTXTargetLowering::LowerCall was trusting the default argument values.
Fixes another 17 of the NVPTX '-verify-machineinstrs with EXPENSIVE_CHECKS' errors in PR32146.
Differential Revision: https://reviews.llvm.org/D33189
llvm-svn: 303082
This patch enables fusing dependent AESE/AESMC and AESD/AESIMC
instruction pairs on Cortex-A72, as recommended in the Software
Optimization Guide, section 4.10.
llvm-svn: 303073
Doing this means that if an LEApcrel is used in two places we will rematerialize
instead of generating two MOVs. This is particularly useful for printfs using
the same format string, where we want to generate an address into a register
that's going to get corrupted by the call.
Differential Revision: https://reviews.llvm.org/D32858
llvm-svn: 303054
Doing this lets us hoist it out of loops, and I've also marked it as
rematerializable the same as the thumb1 and thumb2 counterparts.
It looks like it being marked as such was just a mistake, as the commit that
made that change only mentions LEApcrelJT and in thumb1 and thumb2 only the
LEApcrelJT instructions were marked as having side-effects, so it looks like
the intent was to only mark LEApcrelJT as having side-effects but LEApcrel was
accidentally marked as such also.
Differential Revision: https://reviews.llvm.org/D32857
llvm-svn: 303053
I am working on a speedup of building .gdb_index in LLD and
noticed that relocations that are proccessed in DWARFContextInMemory often uses
the same symbol in a row. This patch introduces caching to reduce the relocations
proccessing time.
For benchmark,
I took debug LLC binary objects configured with -ggnu-pubnames and linked it using LLD.
Link time without --gdb-index is about 4,45s.
Link time with --gdb-index: a) Without patch: 19,16s b) With patch: 15,52s
That means time spent on --gdb-index in this configuration is
19,16s - 4,45s = 14,71s (without patch) vs 15,52s - 4,45s = 11,07s (with patch).
Differential revision: https://reviews.llvm.org/D31136
llvm-svn: 303051
Currently, when masked load, store, gather or scatter intrinsics are used, we check in CodeGenPrepare pass if the subtarget support these intrinsics, if not we replace them with scalar code - this is a functional transformation not an optimization (not optional).
CodeGenPrepare pass does not run when the optimization level is set to CodeGenOpt::None (-O0).
Functional transformation should run with all optimization levels, so here I created a new pass which runs on all optimization levels and does no more than this transformation.
Differential Revision: https://reviews.llvm.org/D32487
llvm-svn: 303050
NFC followup to D33147, this explicitly sets all the arguments (instead of relying on the defaults) to SelectionDAG::getMemIntrinsicNode to help identify -verify-machineinstrs issues.
llvm-svn: 303047
Summary:
We were asserting in RegisterBankInfo if RBI.copyCost() returns
UINT_MAX. This is OK for RegBankSelect::Mode::Fast since we only
try one instruction mapping and can't recover from this, but for
RegBankSelect::Mode::Greedy we will be considering multiple
instruction mappings, so we can recover if we see a UNIT_MAX copy
cost.
The copy cost for one pair of register banks in the AMDGPU backend
will be UNIT_MAX, so this patch will prevent AMDGPU tests from
breaking.
Reviewers: ab, qcolombet, t.p.northover, dsanders
Reviewed By: qcolombet
Subscribers: tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D33144
llvm-svn: 303043
We were previously silently emitting bogus data in release mode,
making it very hard to diagnose the error, or crashing with an
assert in debug mode. A proper diagnostic is now always emitted
when the value to be emitted is out of range.
llvm-svn: 303041
Summary:
Merge overflow computation for signed add,
appearing both in InstCombine and ValueTracking.
As part of the merge,
cleanup the interface for overflow checks in InstCombine.
Patch by Yoav Ben-Shalom.
Reviewers: craig.topper, majnemer
Reviewed By: craig.topper
Subscribers: takuto.ikuta, llvm-commits
Differential Revision: https://reviews.llvm.org/D32946
llvm-svn: 303029
Replace SelectionDAG::getNode(ISD::SELECT, ...)
and SelectionDAG::getNode(ISD::VSELECT, ...)
with SelectionDAG::getSelect(...)
Saves a few lines of code and in some cases saves the need to explicitly
check the type of the desired node.
llvm-svn: 303024
Summary:
After rL301562, on FreeBSD the DynamicLibrary unittests fail, because
the test uses getMainExecutable("DynamicLibraryTests", Ptr), and since
the path does not contain any slashes, retrieving the main executable
will not work.
Reimplement getMainExecutable() for FreeBSD and NetBSD using sysctl(3),
which is more reliable than fiddling with relative or absolute paths.
Also add retrieval of the original argv[] from the GoogleTest framework,
to use as a fallback for other OSes.
Reviewers: emaste, marsupial, hans, krytarowski
Reviewed By: krytarowski
Subscribers: krytarowski, llvm-commits
Differential Revision: https://reviews.llvm.org/D33171
llvm-svn: 303015
Running `llvm-readobj -coff-directives msvcrt.lib` resulted in this error:
Invalid data was encountered while parsing the file
This happened because some of the object files in the archive have empty
`.drectve` sections. These empty sections result in a `parse_failed` error being
returned from `COFFObjectFile::getSectionContents()`, which in turn caused
`llvm-readobj` to stop. With this change, `getSectionContents` now returns
success, and like before the resulting array is empty.
Patch by Dave Lee.
Differential Revision: https://reviews.llvm.org/D32652
llvm-svn: 303014
This reorganisation prevents us from cluttering up the top-level lib directory
with more driver libraries such as llvm-dlltool (see D29892).
llvm-svn: 302995
- MIRYamlMapping: Default value provided for fields which have optional
mappings. Implemented == operators for required classes. When a field's value is
same as default value specified YAML IO class will not print it.
- MIRPrinter: Above mentioned behaviour is not on by default. If -simplify-mir
option not specified, then make yaml::Output to print fields with default values
too.
Differential Revision: https://reviews.llvm.org/D32304
llvm-svn: 302984
Summary:
If the Worklist build causes an IR change this change flag currently factors into the flag for running another iteration of the iteration loop. But only changes during processing should trigger another loop.
This patch captures the worklist creation change flag into the outside the loop flag currently used for DbgDeclares and only sends that flag up to the caller. Rerunning the loop only depends on IC.run() now.
This uses the debug output of InstCombine to determine if one or two iterations run. I couldn't think of a better way to detect it since the second spurious iteration shoudn't make any visible changes. Just wasted computation.
I can do a pre-commit of the test case with the CHECK-NOT as a CHECK if this is an ok way to check this.
This is a subset of D31678 as I'm still not sure how to verify the analysis behavior for that.
Reviewers: davide, majnemer, spatel, chandlerc
Reviewed By: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32453
llvm-svn: 302982
Implemented frequency based cost/saving analysis
and related options.
The pass is now in a state ready to be turne on
in the pipeline (in follow up).
Differential Revision: http://reviews.llvm.org/D32783
llvm-svn: 302967
We end up dereferencing the end iterator here when the Aspect doesn't exist in the DefaultAction map.
Change the API to return Optional<LLT> and return None when not found.
Also update the callers to handle the None case
llvm-svn: 302963
We already counted the number of bits in the RHS so its pretty cheap to just check if the RHS is 1.
Differential Revision: https://reviews.llvm.org/D33154
llvm-svn: 302953
This helped the compiler generate better code for the single word case. It was able to remember that the bit width was still a single word when it created the Remainder APInt and not create code for it possibly being multiword.
llvm-svn: 302952
Summary:
We should not change volatile loads/stores in promoting alloca to vector.
Reviewers:
arsenm
Differential Revision:
http://reviews.llvm.org/D33107
llvm-svn: 302943
This fixes 47 of the 75 NVPTX '-verify-machineinstrs with EXPENSIVE_CHECKS' errors in PR32146.
Differential Revision: https://reviews.llvm.org/D33147
llvm-svn: 302942
Summary:
As discussed in the D32195 review thread and on IRC, remove this option
and replace with parameter, which will be set to true when invoked
from clang in the context of a ThinLTO distributed backend.
Reviewers: pcc
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D33133
llvm-svn: 302939
Summary: LiveRangeShrink pass moves instruction right after the definition with the same BB if the instruction and its operands all have more than one use. This pass is inexpensive and guarantees optimal live-range within BB.
Reviewers: davidxl, wmi, hfinkel, MatzeB, andreadb
Reviewed By: MatzeB, andreadb
Subscribers: hiraditya, jyknight, sanjoy, skatkov, gberry, jholewinski, qcolombet, javed.absar, krytarowski, atrick, spatel, RKSimon, andreadb, MatzeB, mehdi_amini, mgorny, efriedma, davide, dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D32563
llvm-svn: 302938
Summary:
Eli pointed out that it's unsafe to combine the shifts to ISD::SHL etc.,
because those are not defined for b > sizeof(a) * 8, even after some of
the combiners run.
However, PPCISD::SHL defines that behavior (as the instructions themselves).
Move the combination to the backend.
The tests in shift_mask.ll still pass.
Reviewers: echristo, hfinkel, efriedma, iteratee
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D33076
llvm-svn: 302937
This adds a visitor that is capable of accessing type
records randomly and caching intermediate results that it
learns about during partial linear scans. This yields
amortized O(1) access to a type stream even though type
streams cannot normally be indexed.
Differential Revision: https://reviews.llvm.org/D33009
llvm-svn: 302936
At this point in the code rhsWords is guaranteed to be non-zero and less than or equal to lhsWords. So if lhsWords is 1, rhsWords must also be 1. urem alread had the check removed so this makes all 3 consistent.
llvm-svn: 302930
This patch adds min/max population count, leading/trailing zero/one bit counting methods.
The min methods return answers based on bits that are known without considering unknown bits. The max methods give answers taking into account the largest count that unknown bits could give.
Differential Revision: https://reviews.llvm.org/D32931
llvm-svn: 302925
CodeViewDebug sets Asm to nullptr to disable debug info generation. You
can get a .ll file like no-cus.ll from 'clang -gcodeview -g0', which
happens in the ubsan test suite.
llvm-svn: 302923
This code was missing a check for stores, so we were thinking the
congruency class didn't have any memory members, and reset the
memory leader.
Differential Revision: https://reviews.llvm.org/D33056
llvm-svn: 302905
This is a follow up patch for https://reviews.llvm.org/rL300440
to address a comment.
To make implementation to be consistent with other cases we just
ignore the remainder after distribution of remaining probability between
reachable edges.
If we reduced the probability of some edges coming to unreachable
blocks we should distribute the remaining part across other edges
coming to reachable blocks to satisfy the condition that sum of all
probabilities should be equal to one. If this remaining part is not
divided by number of "reachable" edges then we get this remainder.
This remainder probability should be pretty small. Other cases just ignore
if the sum of probabilities is not equal to one so we do the same.
Reviewers: chandlerc, sanjoy, vsk, junbuml, reames
Reviewed By: reames
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D32124
llvm-svn: 302883
Davide Italiano