This means SelectCode unconditionally returns nullptr now. I'll follow
up with a change to make that return void as well, but it seems best
to keep that one very mechanical.
This is part of the work to have Select return void instead of an
SDNode *, which is in turn part of llvm.org/pr26808.
llvm-svn: 269136
Summary:
This change allows to specify "DefaultMethod" for optional operand (IsOptional = 1) in AsmOperandClass that return default value for operand. This is used in convertToMCInst to set default values in MCInst.
Previously if you wanted to set default value for operand you had to create custom converter method. With this change it is possible to use standard converters even when optional operands presented.
Reviewers: tstellarAMD, ab, craig.topper
Subscribers: jyknight, dsanders, arsenm, nhaustov, llvm-commits
Differential Revision: http://reviews.llvm.org/D18242
llvm-svn: 268726
Pattern predicates already appear to be emitted as far down as they can be. The optimization was making no changes on any in-tree target.
llvm-svn: 268705
This opcode never happens in practice, and yet the logic we have in
place to handle it would be undefined behaviour if we ever executed
it. Remove it rather than trying to refactor code that's never
reached.
llvm-svn: 268692
Summary:
As per the discussion on LLVM-dev this patch proposes removing LLVM_ENABLE_TIMESTAMPS.
The only complicated bit of this patch is the Windows support. On windows we used to log an error if /INCREMENTAL was passed to the linker when timestamps were disabled.
With this change since timestamps in code are always disabled we will always compile on windows with /Brepro unless /INCREMENTAL is specified, and we will log a warning when /INCREMENTAL is specified to notify the user that the build will be non-deterministic.
See: http://lists.llvm.org/pipermail/llvm-dev/2016-May/098990.html
Reviewers: bogner, silvas, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19892
llvm-svn: 268670
This backend was supposed to generate C++ code which will re-construct
the LLVM IR passed as input. This seems to me to have very marginal
usefulness in the first place.
However, the code has never been updated to use IRBuilder, which makes
its current value negative -- people who look at the output may be
steered to use the *wrong* C++ APIs to construct IR.
Furthermore, it's generated code that doesn't compile since at least
2013.
Differential Revision: http://reviews.llvm.org/D19942
llvm-svn: 268631
Summary:
We need these variables to concatenate two absolute paths to construct
a valid path. Currently, %t\%t is, for example, expanded to C:\foo\C:\foo,
which is not a valid path because ":" is not a valid path character
on Windows. With this patch, %t will be expanded to C\foo.
Differential Revision: http://reviews.llvm.org/D19757
llvm-svn: 268168
This function performs the reverse computation of
composeSubRegIndexLaneMask().
It will be used in the upcoming "DetectDeadLanes" pass.
llvm-svn: 267849
Previously using lanemasks on registers without any subregisters was not
well defined. This commit extends TargetRegisterInfo/tablegen to:
- Report a lanemask of 1 for regclasses without subregisters
- Do the right thing when mapping a 0/1 lanemask from a class without
subregisters into a class with subregisters in
TargetRegisterInfo::composeSubRegIndexLaneMasks().
This will be used in the upcoming "DetectDeadLanes" patch.
llvm-svn: 267848
This allows ulittle* and ubig* types to be visualized properly
in VS.
Differential Revision: http://reviews.llvm.org/D19339
Reviewed By: Aaron Ballman
llvm-svn: 267050
Summary:
IntrReadWriteArgMem simply becomes IntrArgMemOnly.
So there are fewer intrinsic properties that express their orthogonality
better, and correspond more closely to the corresponding IR attributes.
Suggested by: Philip Reames
Reviewers: joker.eph, reames, tstellarAMD
Subscribers: jholewinski, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D19291
llvm-svn: 267021
Summary:
LLVMAttribute has outlived its utility and is becoming a problem for C API users that what to use all the LLVM attributes. In order to help moving away from LLVMAttribute in a smooth manner, this diff introduce LLVMGetAttrKindIDInContext, which can be used instead of the enum values.
See D18749 for reference.
Reviewers: Wallbraker, whitequark, joker.eph, echristo, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19081
llvm-svn: 266842
Summary:
This property is used to mark an intrinsic that only writes to memory, but
neither reads from memory nor has other side effects.
An example where this is useful is the llvm.amdgcn.buffer.store.format.*
intrinsic, which corresponds to a store instruction that goes through a special
buffer descriptor rather than through a plain pointer.
With this property, the intrinsic should still be handled as having side
effects at the LLVM IR level, but machine scheduling can make smarter
decisions.
Reviewers: tstellarAMD, arsenm, joker.eph, reames
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18291
llvm-svn: 266826
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
This required changing several places to print VT enums as strings instead of raw ints since the proper method to use to print became ambiguous. This is probably an improvement anyway.
This also appears to save ~8K from an x86 self host build of llc.
llvm-svn: 266562
1) We need to add this flag prior to adding any other, in case the user has
specified a -fmodule-cache-path= flag in their custom CXXFLAGS. Such a flag
causes -Werror builds to fail, and thus all config checks fail, until we add
the corresponding -fmodules flag. The modules selfhost bot does this, for
instance.
2) Delete module maps that were putting .cpp files into modules.
3) Enable -fmodules-local-submodule-visibility, to get proper module
visibility rules applied across submodules of the same module. Disable
-fmodules for C builds, since that flag is not available there.
llvm-svn: 266502
Summary: LLVMAttribute has outlived its utility and is becoming a problem for C API users that what to use all the LLVM attributes. In order to help moving away from LLVMAttribute in a smooth manner, this diff introduce LLVMGetAttrKindIDInContext, which can be used instead of the enum values.
Reviewers: Wallbraker, whitequark, joker.eph, echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18749
llvm-svn: 266257
We could make this an option if people don't like it.
But since part of the reason for using a script to generate
checks is to prevent lazy checking that lets bugs crawl
through, let's have the script check the first line too.
For asm tests, it ensures that nothing unexpected has
happened before the first line of asm. This matches the
existing behavior of update_llc_test_checks.py.
More discussion in PR22897:
https://llvm.org/bugs/show_bug.cgi?id=22897
llvm-svn: 265414
Summary:
Upstream googletest prints "Running main() from gtest_main.cc" to stdout prior
to running tests. LLVM removed that print statement in r61540. If a user were
to use lit to run tests that use upstream googletest, however, lit
reports "Running main()" as an invalid test name.
To avoid such a failure, add an extra conditional to `formats/googletest.py`.
Also add tests to demonstrate the modified behavior.
Reviewers: abdulras, ddunbar
Subscribers: ddunbar, llvm-commits, kastiglione
Differential Revision: http://reviews.llvm.org/D18606
llvm-svn: 265034
When using Visual Studio 2015, cmake now puts the native visualizers in llvm.sln, so the developer automatically sees custom visualizations.
Much thanks to ariccio who provided extensive help on this change. (manual installation still needed on VS2013)
llvm-svn: 264601
This is an enhancement of the existing update_llc_test_checks.py script.
It adds some of the functionality from the script used in D17999 to make
the IR checking more flexible.
The bad news:
This actually is 'My First Python Program'. Thus, it's likely that I have
violated all best practices of Python programming if I've made a functional
change from the original program. If you see anything that's obviously
wrong, please let me know or feel free to fix it. I didn't even read any
documentation...
The good news:
I tested this on ~10 existing opt/llc regression tests, and it does what
I hoped for. It produces exact checking for IR regression tests and doesn't
signficantly change the existing llc-with-x86-target asm checking. The opt
tests that were modified in r263667, r263668, r263674, and r263679 are
examples of the expected results, except that this version of the script
puts the check lines ahead of the IR to follow the existing llc/asm
behavior.
If there are no complaints/fallout, we should be able to remove the
original script. Extending this script to be used for non-x86 and clang
regression tests would be the expected follow-up steps.
llvm-svn: 264357
We lose the 'utils' directory name in our advertising line with
this change. We could retain that, but I don't see the point.
This removes a dependency for making the script apply to more than
'llc'. Ie, we'll want to change the script name if it works with
opt/clang too.
llvm-svn: 264310
The goal is to enhance this script to be used with opt and clang:
Break 'main' into functions and change variable names to be more
generic because we want to handle more than x86 asm output.
llvm-svn: 264307
The goal is to enhance this script to be used with opt and clang:
Group all of the regexes together, so it's easier to see what's going on.
This will make it easier to break main() up into pieces too.
Also, note that some of the regexes are for x86-specific asm.
llvm-svn: 264197
In the <DisplayString> of PointerIntPair , I cast the pointer to the actual type, so VS can leverage it while visualizing, not unlike the recent change to PointerUnion visualization.
In the expansion, the current code is casting to the incorrect type (wrong number of stars), so I fixed that as well.
llvm-svn: 263821
Summary:
The multiprocessing.Queue.put() call can hang if we try queueing all the
tests before starting to take them out of the queue.
The current implementation hangs if tests exceed 2^^15, on Mac OS X.
This might happen with a ninja check-all if one has a bunch of llvm
projects.
Reviewers: delcypher, bkramer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17609
llvm-svn: 263731
This lets us for example start running the unit test suite early. For
'check-llvm' on my machine, this drops the tim e from 44s to 32s!!!!!
It's pretty ugly. I barely know how to write Python, so feel free to
just tell me how I should write it instead. =D Thanks to Filipe and
others for help.
Differential Revision: http://reviews.llvm.org/D18089
llvm-svn: 263329
TableGen checks at compiletime that for scheduling models with
"CompleteModel = 1" one of the following holds:
- Is marked with the hasNoSchedulingInfo flag
- The instruction is a subclass of Sched
- There are InstRW definitions in the scheduling model
Typical steps necessary to complete a model:
- Ensure all pseudo instructions that are expanded before machine
scheduling (usually everything handled with EmitYYY() functions in
XXXTargetLowering).
- If a CPU does not support some instructions mark the corresponding
resource unsupported: "WriteRes<WriteXXX, []> { let Unsupported = 1; }".
- Add missing scheduling information.
Differential Revision: http://reviews.llvm.org/D17747
llvm-svn: 262384
This introduces a new flag that indicates that a specific instruction
will never be present when the MachineScheduler runs and therefore needs
no scheduling information.
This is in preparation for an upcoming commit which checks completeness
of a scheduling model when tablegen runs.
Differential Revision: http://reviews.llvm.org/D17728
llvm-svn: 262383
Previosy, if actual instruction have one of optional operands then other optional operands listed before this also should be presented.
For example instruction v_fract_f32 v0, v1, mul:2 have one optional operand - OMod and do not have optional operand clamp. Previously this was not allowed because clamp is listed before omod in AsmString:
string AsmString = "v_fract_f32$vdst, $src0_modifiers$clamp$omod";
Making this work required some hacks (both OMod and Clamp match classes have same PredicateMethod).
Now, if MatchInstructionImpl meets formal optional operand that is not presented in actual instruction it skips this formal operand and tries to match current actual operand with next formal.
Patch by: Sam Kolton
Review: http://reviews.llvm.org/D17568
[AMDGPU] Assembler: Check immediate types for several optional operands in predicate methods
With this change you should place optional operands in order specified by asm string:
clamp -> omod
offset -> glc -> slc -> tfe
Fixes for several tests.
Depends on D17568
Patch by: Sam Kolton
Review: http://reviews.llvm.org/D17644
llvm-svn: 262314
Combinations of suffixes that look useful are actually ignored;
complaining about them will avoid mistakes.
Differential Revision: http://reviews.llvm.org/D17587
llvm-svn: 262263
Combinations of suffixes that look useful actually are ignored;
complaining about them will avoid mistakes.
Differential Revision: http://reviews.llvm.org/D17587
llvm-svn: 262092
Patch by Jack Howarth.
When linking to libLLVM, don't also link to the component
libraries that constitute libLLVM.
Differential Revision: http://reviews.llvm.org/D16945
llvm-svn: 260641
Currently you can't specify node properties like commutativity on
a PatFrag. If you want to create a PatFrag on a commutative node
with a hasOneUse predicate, this enables you to specify that the
PatFrag is also commutable.
llvm-svn: 260404
Summary:
This patch adds Windows support for a few of the llvm-config commands,
including cflags, ldflags, libs, and system-libs.
Currently llvm-config is untested, so this patch adds tests for the
commands that it fixes as well.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16762
llvm-svn: 260263
Summary:
This makes it possible to specify some operands as optional to the AsmMatcher.
Setting this field to true will prevent the AsmMatcher from emitting
'too few operands' errors when there are missing optional operands.
Reviewers: olista01, ab
Subscribers: nhaustov, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D15755
llvm-svn: 259913
Fix the lit bug that enabled this "feature" (empty triple is substring
of all possible target triples) and change the two outliers to use the
documented * syntax.
llvm-svn: 259799
Summary:
This patch adds a reserve call to an expensive function
(`llvm::LoadIntrinsics`), and may fix a few other low hanging
performance fruit (I've put them in comments for now, so we can
discuss).
**Motivation:**
As I'm sure other developers do, when I build LLVM, I build the entire
project with the same config (`Debug`, `MinSizeRel`, `Release`, or
`RelWithDebInfo`). However, the `Debug` config also builds llvm-tblgen
in `Debug` mode. Later build steps that run llvm-tblgen then can
actually be the slowest steps in the entire build. Nobody likes slow
builds.
Reviewers: rnk, dblaikie
Differential Revision: http://reviews.llvm.org/D16832
Patch by Alexander G. Riccio
llvm-svn: 259683
Summary:
This adds a new attribute which targets can set in TableGen which causes a function to be generated which matches register alternative names. This is very similar to `ShouldEmitMatchRegisterName`, except it works on alt names.
This patch is currently used by the out of tree part of the AVR backend. It reduces code duplication greatly, and has the effect that you do not need to hardcode altname to register mappings in C++.
It will not work on targets which have registers which share the same aliases.
Reviewers: stoklund, arsenm, dsanders, hfinkel, vkalintiris
Subscribers: hfinkel, dylanmckay, llvm-commits
Differential Revision: http://reviews.llvm.org/D16312
llvm-svn: 259636
Summary:
r257791 disabled the test-suite export since the addition of CMakeLists.txt was
causing build failures. This patch exports the test-suite again but does so
outside the source tree so that it isn't included in the Phase[123] builds.
Reviewers: hans
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16679
llvm-svn: 259094
Strip dos line endings from llc generated files to allow the regex patterns to match them.
Ensure updated *.ll files are generated with unix style line endings.
llvm-svn: 258987
If a lit test has a RUN line that includes a redirection to "/dev/tty", the
redirection goes to the special device file corresponding to the console. It
is /dev/tty on UNIX-like systems and "CON" on Windows.
This patch is needed to implement a test like PR25717 (caused by the size limit
of the Windows system call WriteConsole() prior to Windows 8) where the test
only breaks when outputing to the console and won't fail if using a pipe.
llvm-svn: 258898
This brings the compile time of Function.cpp from ~40s down to ~4s for
me locally. It also shaves off about 400KB of object file size in a
release+asserts build.
I also realized that the AMDGPU backend does not have any GCC builtin
names to match, so the extra lookup was a no-op. I removed it to silence
a zero-length string table array warning. There should be no functional
change here.
This change really ends the story of PR11951.
llvm-svn: 258897
Here, sed is used to prepare object files for comparison via cmp. On my Darwin
15.4.0 machine, LC_CTYPE is set to UTF-8 (by default, I believe). Under these
circumstances, anything sed is made to read will be treated as UTF-8, prompting
it to signal an error if it is not, like so:
% sed s/a/b/ <(head -n1 /dev/random) >/dev/null; echo $?
sed: RE error: illegal byte sequence
1
%
To make sed work as expected, I need to set LC_CTYPE to C:
% env LC_CTYPE=C sed s/a/b/ <(head -n1 /dev/random) >/dev/null; echo $?
0
%
Without this change, sed will exit with an error for every single file that it
compares between phase 2 and phase 3, thereby making it look as if the
differences were far larger than they are.
Patch by Elias Pipping!
Differential Revision: http://reviews.llvm.org/D16548
llvm-svn: 258891
The AMDGPU backend was the last user of the old StringMatcher
recognition code. Move it over to the new lookupLLVMIntrinsicName
funciton, which is now improved to handle all of the interesting edge
cases exposed by AMDGPU intrinsic names.
llvm-svn: 258875
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
Step one towards using a simple binary search to lookup intrinsic IDs
instead of our crazy table generated switch+memcmp+startswith code that
makes Function.cpp take about a minute to compile. See PR24785 and
PR11951 for why we should do this.
The X86 backend contains tables that need to be sorted on intrinsic ID,
so reorder those.
llvm-svn: 258757
This is a fix for https://llvm.org/bugs/show_bug.cgi?id=22796.
The previous implementation of ClassInfo::operator< allowed cycles of classes
such that x < y < z < x, meaning that a list of them cannot be correctly
sorted, and the sort order could differ with different standard libraries.
The original implementation sorted classes by ValueName if they were otherwise
equal. This isn't strictly necessary, but some backends seem to accidentally
rely on it. If I reverse this comparison I get 8 test failures spread across
the AArch64, Mips and X86 backends, so I have left it in until those backends
can be fixed.
There was one case in the X86 backend where the observable behaviour of the
assembler is changed by this patch. This was because some of the memory asm
operands were not marked as children of X86MemAsmOperand.
Differential Revision: http://reviews.llvm.org/D16141
llvm-svn: 258677
instead of using symlinks
Summary:
In the past I have run into several problems with the way
`test-release.sh` creates all the subproject directories as siblings,
and then uses symlinks to stitch them all together. In some scenarios
this leads to clang not being able to find header files, etc.
This patch changes the script so it directly exports into the correct
target locations for each subproject.
Reviewers: hans
Subscribers: emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D16420
llvm-svn: 258436
The selection process being split into separate passes, we need generic opcodes
to translate the LLVM IR to target independent code.
This patch adds an opcode for addition: G_ADD.
Differential Revision: http://reviews.llvm.org/D15472
llvm-svn: 258333
r100895 landed an llvm-only change to add minix support to googletest.
It did that by putting "defined()" in a macro, which has undefined
behavior. Slightly reshuffle things to remove that undefined behavior.
Also mention in README.LLVM that minix support is a local change.
llvm-svn: 258190
Adds the corresponding CodeGenInstruction number to each AsmWriterInst. Then write all the operand uniqueing loops using the AsmWriterInst array and indices. Then use the CodeGenInstruction index to fill out the OpCodeInfo array.
llvm-svn: 258005
is < ``2.0``.
Older versions of psutil (e.g. ``1.2.1`` which is the version shipped with
Ubuntu 14.04) use a different API for retrieving the child processes.
To handle this try the new API first and if that fails try the old API.
llvm-svn: 257616
This reverts r257221.
This caused several build bot failures
* It looks like some of the tests don't work correctly under Windows
* It looks like the lit per test timeout tests fail
So I'm reverting for now. Once the above failures are fixed running
lit's tests can be enabled again.
llvm-svn: 257268
directy with ``make check-lit`` and are run as part of
``make check-all``.
In principle we should run lit's testsuite before testing LLVM using lit
so that any problems with lit get discovered before testing LLVM so we
can bail out early. However this implementation (``check-all`` runs all
tests together) seemed simpler and will still report failing lit tests.
Note that the tests and the configured ``lit.site.cfg`` have to be
copied into the build directory to avoid polluting the source tree.
llvm-svn: 257221
This restores the previous behavior of not including the mnemonic in the classes table for every target that starts instruction lines with the mnemonic. Not only did the table size increase by 1 entry, but the class enum increased in size which caused every class in the array to increase in size. It also grew the size of the function that parsers tokens into classes by a substantial amount.
This adds a new HasMnemonicFirst flag to all AsmParsers. It's set to 1 by default and Hexagon target overrides it to 0.
For the X86 target alone this recovers 324KB of size on the llvm-mc executable.
I believe the current state is still a bad design choice for the Hexagon target as it causes most of the parsing to do a linear search through the entire match table to comparing operands against every instruction until it finds one that works. At least for the other targets we do a binary search based on mnemonic over which to do the linear scan.
llvm-svn: 256669
This should work with ShTest (executed externally or internally) and GTest
test formats.
To set the timeout a new option ``--timeout=`` has
been added which specifies the maximum run time of an individual test
in seconds. By default this 0 which causes no timeout to be enforced.
The timeout can also be set from a lit configuration file by modifying
the ``lit_config.maxIndividualTestTime`` property.
To implement a timeout we now require the psutil Python module if a
timeout is requested. This dependency is confined to the newly added
``lit.util.killProcessAndChildren()``. A note has been added into the
TODO document describing how we can remove the dependency on the
``pustil`` module in the future. It would be nice to remove this
immediately but that is a lot more work and Daniel Dunbar believes it is
better that we get a working implementation first and then improve it.
To avoid breaking the existing behaviour the psutil module will not be
imported if no timeout is requested.
The included testcases are derived from test cases provided by
Jonathan Roelofs which were in an previous attempt to add a per test
timeout to lit (http://reviews.llvm.org/D6584). Thanks Jonathan!
Reviewers: ddunbar, jroelofs, cmatthews, MatzeB
Subscribers: cmatthews, llvm-commits
Differential Revision: http://reviews.llvm.org/D14706
llvm-svn: 256471
This reapplies r256277 with two changes:
- In emitFnAttrCompatCheck, change FuncName's type to std::string to fix
a use-after-free bug.
- Remove an unnecessary install-local target in lib/IR/Makefile.
Original commit message for r252949:
Provide a way to specify inliner's attribute compatibility and merging
rules using table-gen. NFC.
This commit adds new classes CompatRule and MergeRule to Attributes.td,
which are used to generate code to check attribute compatibility and
merge attributes of the caller and callee.
rdar://problem/19836465
llvm-svn: 256304
For targets to add their own operand types as needed, as advertised in
Operand's comment, they need to be able to specify an alternate namespace
for OperandType names too. This matches the RegisterOperand class.
llvm-svn: 256299
This reapplies r252990 and r252949. I've added member function getKind
to the Attr classes which returns the enum or string of the attribute.
Original commit message for r252949:
Provide a way to specify inliner's attribute compatibility and merging
rules using table-gen. NFC.
This commit adds new classes CompatRule and MergeRule to Attributes.td,
which are used to generate code to check attribute compatibility and
merge attributes of the caller and callee.
rdar://problem/19836465
llvm-svn: 256277
Part 1 was submitted in http://reviews.llvm.org/D15134.
Changes in this part:
* X86RegisterInfo.td, X86RecognizableInstr.cpp: Add FR128 register class.
* X86CallingConv.td: Pass f128 values in XMM registers or on stack.
* X86InstrCompiler.td, X86InstrInfo.td, X86InstrSSE.td:
Add instruction selection patterns for f128.
* X86ISelLowering.cpp:
When target has MMX registers, configure MVT::f128 in FR128RegClass,
with TypeSoftenFloat action, and custom actions for some opcodes.
Add missed cases of MVT::f128 in places that handle f32, f64, or vector types.
Add TODO comment to support f128 type in inline assembly code.
* SelectionDAGBuilder.cpp:
Fix infinite loop when f128 type can have
VT == TLI.getTypeToTransformTo(Ctx, VT).
* Add unit tests for x86-64 fp128 type.
Differential Revision: http://reviews.llvm.org/D11438
llvm-svn: 255558
AsmWriterEmitter will generate a getRegisterName function with an alternate
register name index as its second argument if the target makes use of them. The
enum of these values is generated in RegisterInfoEmitter. The getRegisterName
generator would assume the namespace could always be found by reading index 1
of the list of AltNameIndices, but this will fail if this list is sorted such
that the NoRegAltName is at index 1. Because this list is sorted by record name
(in CodeGenTarget::ReadRegAltNameIndices), you only run in to problems if your
MyTargetRegisterInfo.td defines a single RegAltNameIndex that sorts lexically
before NoRegAltName.
For example, if a target has something like
def AnAltNameIndex : RegAltNameIndex
and defines RegAltNameIndices for some registers then, prior to this change,
AsmWriterEmitter would generate references to
::AnAltNameIndex and ::NoRegAltName
Patch by Alex Bradbury!
llvm-svn: 255344
Patch turns on OpenMP support in clang by default after fixing OpenMP buildbots.
Differential Revision: http://reviews.llvm.org/D13802
llvm-svn: 255222
The Statistical Profiling Extension is an optional extension to
ARMv8.2-A. Since it is an optional extension, I have added the
FeatureSPE subtarget feature to control it. The assembler-visible parts
of this extension are the new "psb csync" instruction, which is
equivalent to "hint #17", and a number of system registers.
Differential Revision: http://reviews.llvm.org/D15021
llvm-svn: 254401
autogenerated.
Also update existing test cases which appear to be generated by it and
weren't modified (other than addition of the header) by rerunning it.
llvm-svn: 253917
Duplicate a few common definitions between DFAPacketizer.cpp and
DFAPacketizerEmitter.cpp to avoid including files from CodeGen
in TableGen.
llvm-svn: 253820
Extended DFA tablegen to:
- added "-debug-only dfa-emitter" support to llvm-tblgen
- defined CVI_PIPE* resources for the V60 vector coprocessor
- allow specification of multiple required resources
- supports ANDs of ORs
- e.g. [SLOT2, SLOT3], [CVI_MPY0, CVI_MPY1] means:
(SLOT2 OR SLOT3) AND (CVI_MPY0 OR CVI_MPY1)
- added support for combo resources
- allows specifying ORs of ANDs
- e.g. [CVI_XLSHF, CVI_MPY01] means:
(CVI_XLANE AND CVI_SHIFT) OR (CVI_MPY0 AND CVI_MPY1)
- increased DFA input size from 32-bit to 64-bit
- allows for a maximum of 4 AND'ed terms of 16 resources
- supported expressions now include:
expression => term [AND term] [AND term] [AND term]
term => resource [OR resource]*
resource => one_resource | combo_resource
combo_resource => (one_resource [AND one_resource]*)
Author: Dan Palermo <dpalermo@codeaurora.org>
kparzysz: Verified AMDGPU codegen to be unchanged on all llc
tests, except those dealing with instruction encodings.
Reapply the previous patch, this time without circular dependencies.
llvm-svn: 253793
Extended DFA tablegen to:
- added "-debug-only dfa-emitter" support to llvm-tblgen
- defined CVI_PIPE* resources for the V60 vector coprocessor
- allow specification of multiple required resources
- supports ANDs of ORs
- e.g. [SLOT2, SLOT3], [CVI_MPY0, CVI_MPY1] means:
(SLOT2 OR SLOT3) AND (CVI_MPY0 OR CVI_MPY1)
- added support for combo resources
- allows specifying ORs of ANDs
- e.g. [CVI_XLSHF, CVI_MPY01] means:
(CVI_XLANE AND CVI_SHIFT) OR (CVI_MPY0 AND CVI_MPY1)
- increased DFA input size from 32-bit to 64-bit
- allows for a maximum of 4 AND'ed terms of 16 resources
- supported expressions now include:
expression => term [AND term] [AND term] [AND term]
term => resource [OR resource]*
resource => one_resource | combo_resource
combo_resource => (one_resource [AND one_resource]*)
Author: Dan Palermo <dpalermo@codeaurora.org>
kparzysz: Verified AMDGPU codegen to be unchanged on all llc
tests, except those dealing with instruction encodings.
llvm-svn: 253790
the script when running a ShTest with an external or internal shell.
This bug is caused by use of the ``map`` function in Python 3 which
returns an iterable (rather than a list in Python 2). After the iterable
is exhausted it won't return any more output and consequently when
``_runShTest()`` tries to access the ``script`` which has already been
iterated over it is empty. Converting to a list immediatley after
calling ``map()`` fixes this.
This fixes the ``tests/shtest-format.py`` test when running under
Python3 which was previously failing.
llvm-svn: 253556
We use to have an odd difference among MapVector and SetVector. The map
used a DenseMop, but the set used a SmallSet, which in turn uses a
std::set.
I have changed SetVector to use a DenseSet. If you were depending on the
old behaviour you can pass an explicit set type or use SmallSetVector.
The common cases for needing to do it are:
* Optimizing for small sets.
* Sets for types not supported by DenseSet.
llvm-svn: 253439
Allowing imprecise lane masks in case of more than 32 sub register lanes
lead to some tricky corner cases, and I need another bugfix for another
one. Instead I rather declare lane masks as precise and let tablegen
abort if we do not have enough bits.
This does not affect any in-tree target, even AMDGPU only needs 16 lanes
at the moment. If the 32 lanes turn out to be a problem in the future,
then we can easily change the LaneBitmask typedef to uint64_t.
Differential Revision: http://reviews.llvm.org/D14557
llvm-svn: 253279
MCSubtargetInfo in the subclasses into MCTargetAsmParser and define a
member function getSTI.
This is done in preparation for making changes to shrink the size of
MCRelaxableFragment. (see http://reviews.llvm.org/D14346).
llvm-svn: 253124
instead of executable if the argument was found inside a directory
contained in PATH.
An example where this could cause a problem is if there was a RUN line
that ran the ``test`` command and if the user had a directory in their
PATH that contained a directory called ``test/`` (that occured before
``/usr/bin/``). Lit would try to use the directory as the executable
which would fail with the rather cryptic message.
```
Could not create process due to [Errno 13] Permission denied
```
llvm-svn: 253031
This reapplies r252949. I've changed the type of FuncName to be
std::string instead of StringRef in emitFnAttrCompatCheck.
Original commit message for r252949:
Provide a way to specify inliner's attribute compatibility and merging
rules using table-gen. NFC.
This commit adds new classes CompatRule and MergeRule to Attributes.td,
which are used to generate code to check attribute compatibility and
merge attributes of the caller and callee.
rdar://problem/19836465
llvm-svn: 252990
rules using table-gen. NFC.
This commit adds new classes CompatRule and MergeRule to Attributes.td,
which are used to generate code to check attribute compatibility and
merge attributes of the caller and callee.
rdar://problem/19836465
llvm-svn: 252949
This is a step towards consolidating some of the information regarding
attributes in a single place.
This patch moves the enum attributes in Attributes.h to the table-gen
file. Additionally, it adds definitions of target independent string
attributes that will be used in follow-up commits by the inliner to
check attribute compatibility.
rdar://problem/19836465
llvm-svn: 252796
The existing -v option only displays commands and outputs for failed
tests, the newly introduced -a displays it for all executed tests.
llvm-svn: 251806
There is no need to generate separate table for intrinsics mod ref behaviour.
It can now be determined purely from function attributes.
Differential Revision: http://reviews.llvm.org/D13917
llvm-svn: 251040
This script prints a CSV of all misched models of a target when given the output of the debug output of subtarget using:
llvm-tblgen --gen-subtarget --debug-only=subtarget-emitter ...
With thanks to Dave Estes for mentioning the idea at the 2014 LLVM Developers' Meeting.
Patch by Christof Douma!
llvm-svn: 250020
It is common to have a default soft process limit, at least on some families of
Linux distributions, of 1024. This is normally more than enough, but if you
have many cores, and you're running tests that create many threads, this can
become a problem. My POWER7 development machine has 48 cores, and when running
the lld regression tests, which often want to create up to 48 threads, I run
into problems. lit, by default, will want to run 48 tests in parallel, and
48*48 < 1024, and so many tests fail like this:
terminate called after throwing an instance of 'std::system_error'
what(): Resource temporarily unavailable
or lit fails like this when launching a test:
OSError: [Errno 11] Resource temporarily unavailable
lit can easily detect this situation and attempt to repair it before launching
tests (by raising the soft process limit to something that will allow ncpus^2
threads to be created), and should do so to prevent spurious test failures.
This is the follow-up to this thread:
http://lists.llvm.org/pipermail/llvm-dev/2015-October/090942.html
llvm-svn: 249161
Catchret transfers control from a catch funclet to an earlier funclet.
However, it is not completely clear which funclet the catchret target is
part of. Make this clear by stapling the catchret target's funclet
membership onto the CATCHRET SDAG node.
llvm-svn: 249052
HHVM calling convention, hhvmcc, is used by HHVM JIT for
functions in translated cache. We currently support LLVM back end to
generate code for X86-64 and may support other architectures in the
future.
In HHVM calling convention any GP register could be used to pass and
return values, with the exception of R12 which is reserved for
thread-local area and is callee-saved. Other than R12, we always
pass RBX and RBP as args, which are our virtual machine's stack pointer
and frame pointer respectively.
When we enter translation cache via hhvmcc function, we expect
the stack to be aligned at 16 bytes, i.e. skewed by 8 bytes as opposed
to standard ABI alignment. This affects stack object alignment and stack
adjustments for function calls.
One extra calling convention, hhvm_ccc, is used to call C++ helpers from
HHVM's translation cache. It is almost identical to standard C calling
convention with an exception of first argument which is passed in RBP
(before we use RDI, RSI, etc.)
Differential Revision: http://reviews.llvm.org/D12681
llvm-svn: 248832
Previously the code added an extra nullptr entry to a static array and then created an ArrayRef with a size one less than the static array. If there were no other entries the array would just contain the nullptr and the ArrayRef would be crated with size 0.
Instead, put the right number of entries in the array and explicitly emit 'None' if the size would be 0. This allows the static array constructor of makeArrayRef to be used.
llvm-svn: 248244
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change. Thanks go to Pavel Labath for fixing LLDB for me.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247692
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247683
Summary: This fixes a variety of typos in docs, code and headers.
Subscribers: jholewinski, sanjoy, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D12626
llvm-svn: 247495
Justin Bogner