The x86 ret instruction has a 16 bit immediate indicating how many bytes
to pop off of the stack beyond the return address.
There is a problem when extremely large structs are passed by value: we
might not be able to fit the number of bytes to pop into the return
instruction.
To fix this, expand RET_FLAG a little later and use a special sequence
to clean the stack:
pop %ecx ; return address is now in %ecx
add $n, %esp ; clean the stack
push %ecx ; bring the return address back on the stack
ret ; pop the return address and jmp to it's value
llvm-svn: 262755
MSDN's x64 software conventions page says that this is one of the fixed
list of legal epilogues:
https://msdn.microsoft.com/en-us/library/tawsa7cb.aspx
Presumably this is how the unwinder distinguishes epilogue jumps from
in-function control flow.
Also normalize the way we place "## TAILCALL" comments on such jumps.
llvm-svn: 227611
win64: Call __chkstk through a register with the large code model
Fixes half of PR18582. True dynamic allocas will still have a
CALL64pcrel32 which will fail.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D7267
llvm-svn: 227503
Requires new AsmParserOperand types that detect 16-bit and 32/64-bit mode so that we choose the right instruction based on default sizing without predicates. This is necessary since predicates mess up the disassembler table building.
llvm-svn: 225256
The assembler backend will relax to the long form if necessary. This removes a swap from long form to short form in the MCInstLowering code. Selecting the long form used to be required by the old JIT.
llvm-svn: 225242
This is necessary to allow the disassembler to be able to handle AdSize32 instructions in 64-bit mode when address size prefix is used.
Eventually we should probably also support 'addr32' and 'addr16' in the assembler to override the address size on some of these instructions. But for now we'll just use special operand types that will lookup the current mode size to select the right instruction.
llvm-svn: 225075
This removes a hardcoded list of instructions in the CodeEmitter. Eventually I intend to remove the predicates on the affected instructions since in any given mode two of them are valid if we supported addr32/addr16 prefixes in the assembler.
llvm-svn: 224809
This finishes the job started in r198756, and creates separate opcodes for
64-bit vs. 32-bit versions of the rest of the RET instructions too.
LRETL/LRETQ are interesting... I can't see any justification for their
existence in the SDM. There should be no 'LRETL' in 64-bit mode, and no
need for a REX.W prefix for LRETQ. But this is what GAS does, and my
Sandybridge CPU and an Opteron 6376 concur when tested as follows:
asm __volatile__("pushq $0x1234\nmovq $0x33,%rax\nsalq $32,%rax\norq $1f,%rax\npushq %rax\nlretl $8\n1:");
asm __volatile__("pushq $1234\npushq $0x33\npushq $1f\nlretq $8\n1:");
asm __volatile__("pushq $0x33\npushq $1f\nlretq\n1:");
asm __volatile__("pushq $0x1234\npushq $0x33\npushq $1f\nlretq $8\n1:");
cf. PR8592 and commit r118903, which added LRETQ. I only added LRETIQ to
match it.
I don't quite understand how the Intel syntax parsing for ret
instructions is working, despite r154468 allegedly fixing it. Aren't the
explicitly sized 'retw', 'retd' and 'retq' supposed to work? I have at
least made the 'lretq' work with (and indeed *require*) the 'q'.
llvm-svn: 199106
I couldn't see how to do this sanely without splitting RETQ from RETL.
Eric says: "sad about the inability to roundtrip them now, but...".
I have no idea what that means, but perhaps it wants preserving in the
commit comment.
llvm-svn: 198756
This fixes the bulk of 16-bit output, and the corresponding test case
x86-16.s now looks mostly like the x86-32.s test case that it was
originally based on. A few irrelevant instructions have been dropped,
and there are still some corner cases to be fixed in subsequent patches.
llvm-svn: 198752
That's what it actually means, and with 16-bit support it's going to be
a little more relevant since in a few corner cases we may actually want
to distinguish between 16-bit and 32-bit mode (for example the bare 'push'
aliases to pushw/pushl etc.)
Patch by David Woodhouse
llvm-svn: 197768
To enable a load of a call address to be folded with that call, this
load is moved from outside of callseq into callseq. Such a moving
adds a non-glued node (that load) into a glued sequence. This non-glue
load is only removed when DAG selection folds them into a memory form
call instruction. When such instruction selection is disabled, it breaks
DAG schedule.
To prevent that, such moving is disabled when target favors register
indirect call.
Previous workaround disabling CALL32m/CALL64m insn selection is removed.
llvm-svn: 178308
Call instructions no longer have a list of 43 call-clobbered registers.
Instead, they get a single register mask operand with a bit vector of
call-preserved registers.
This saves a lot of memory, 42 x 32 bytes = 1344 bytes per call
instruction, and it speeds up building call instructions because those
43 imp-def operands no longer need to be added to use-def lists. (And
removed and shifted and re-added for every explicit call operand).
Passes like LiveVariables, LiveIntervals, RAGreedy, PEI, and
BranchFolding are significantly faster because they can deal with call
clobbers in bulk.
Overall, clang -O2 is between 0% and 8% faster, uniformly distributed
depending on call density in the compiled code. Debug builds using
clang -O0 are 0% - 3% faster.
I have verified that this patch doesn't change the assembly generated
for the LLVM nightly test suite when building with -disable-copyprop
and -disable-branch-fold.
Branch folding behaves slightly differently in a few cases because call
instructions have different hash values now.
Copy propagation flushes its data structures when it crosses a register
mask operand. This causes it to leave a few dead copies behind, on the
order of 20 instruction across the entire nightly test suite, including
SPEC. Fixing this properly would require the pass to use different data
structures.
llvm-svn: 150638
Adds an instruction itinerary to all x86 instructions, giving each a default latency of 1, using the InstrItinClass IIC_DEFAULT.
Sets specific latencies for Atom for the instructions in files X86InstrCMovSetCC.td, X86InstrArithmetic.td, X86InstrControl.td, and X86InstrShiftRotate.td. The Atom latencies for the remainder of the x86 instructions will be set in subsequent patches.
Adds a test to verify that the scheduler is working.
Also changes the scheduling preference to "Hybrid" for i386 Atom, while leaving x86_64 as ILP.
Patch by Preston Gurd!
llvm-svn: 149558
The Win64 calling convention has xmm6-15 as callee-saved while still
clobbering all ymm registers.
Add a YMM_HI_6_15 pseudo-register that aliases the clobbered part of the
ymm registers, and mark that as call-clobbered. This allows live xmm
registers across calls.
This hack wouldn't be necessary with RegisterMask operands representing
the call clobbers, but they are not quite operational yet.
llvm-svn: 149088
prologue and epilogue if the adjustment is 8. Similarly, use pushl / popl if
the adjustment is 4 in 32-bit mode.
In the epilogue, takes care to pop to a caller-saved register that's not live
at the exit (either return or tailcall instruction).
rdar://8771137
llvm-svn: 122783
be more complete. These are only expected to be used by llvm-mc with assembly
source so there is no pattern, [], in the .td files. Most are being added to
X86InstrInfo.td as Chris suggested and only comments about register uses are
added. Suggestions welcome on the .td changes as I'm not sure on every detail
of the x86 records. More missing instructions will be coming.
llvm-svn: 116716
David Majnemer