Currently every time we encounter an indirect call of a known function,
we try to evaluate the inline cost of that function. In case of a
recursion, that evaluation never stops.
The solution I propose is to evaluate only the indirect call of the
function, while any further indirect calls (of a known function) will be
treated just as direct function calls, which, actually, never tries to
evaluate the call.
Fixes PR35469.
Differential Revision: https://reviews.llvm.org/D69349
Summary:
While updatePostDominatedByUnreachable attemps to find basic blocks that are post-domianted by unreachable blocks, it currently cannot handle loops precisely, because it doesn't use the actual post dominator tree analysis but relies on heuristics of visiting basic blocks in post-order. More precisely, when the entire loop is post-dominated by the unreachable block, current algorithm fails to detect the entire loop as post-dominated by the unreachable because when the algorithm reaches to the loop latch it fails to tell all its successors (including the loop header) will "eventually" be post-domianted by the unreachable block, because the algorithm hasn't visited the loop header yet. This makes BPI for the loop latch to assume that loop backedges are taken with 100% of probability. And because of this, block frequency info sometimes marks virtually dead loops (which are post dominated by unreachable blocks) super hot, because 100% backedge-taken probability makes the loop iteration count the max value. updatePostDominatedByColdCall has the exact same problem as well.
To address this problem, this patch makes PostDominatedByUnreachable/PostDominatedByColdCall to be computed with the actual post-dominator tree.
Reviewers: skatkov, chandlerc, manmanren
Reviewed By: skatkov
Subscribers: manmanren, vsk, apilipenko, Carrot, qcolombet, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70104
This is correct for any value including NaN/inf.
We don't have this fold directly in the backend either,
but x86 manages to get it after converting things to bitops.
Summary:
Combine three verification methods into one to improve compile time when asserts are enabled.
Motivated by PR44066.
Sample change of timings on testcase in PR44066 (release+asserts):
MSSA off or verification disabled: 1.13s.
MSSA on (ToT): 2.48s.
With patch: 2.03s.
With enabling DefUses after combining Domination+Ordering: 2.6s.
After also combining DefUses with Domination+Ordering: 2.06s (candidate to be taken out of EXPENSIVE_CHECKS).
Subscribers: Prazek, hiraditya, george.burgess.iv, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70618
Summary:
In this patch the DDG DAG is sorted topologically to put the
nodes in the graph in the order that would satisfy all
dependencies. This helps transformations that would like to
generate code based on the DDG. Since the DDG is a DAG a
reverse-post-order traversal would give us the topological
ordering. This patch also sorts the basic blocks passed to
the builder based on program order to ensure that the
dependencies are computed in the correct direction.
Authored By: bmahjour
Reviewer: Meinersbur, fhahn, myhsu, xtian, dmgreen, kbarton, jdoerfert
Reviewed By: Meinersbur
Subscribers: ychen, arphaman, simoll, a.elovikov, mgorny, hiraditya, jfb, wuzish, llvm-commits, jsji, Whitney, etiotto, ppc-slack
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70609
This version contains 2 fixes for reported issues:
1. Make sure we do not try to sink terminator instructions.
2. Make sure we bail out, if we try to sink an instruction that needs to
stay in place for another recurrence.
Original message:
If the recurrence PHI node has a single user, we can sink any
instruction without side effects, given that all users are dominated by
the instruction computing the incoming value of the next iteration
('Previous'). We can sink instructions that may cause traps, because
that only causes the trap to occur later, but not on any new paths.
With the relaxed check, we also have to make sure that we do not have a
direct cycle (meaning PHI user == 'Previous), which indicates a
reduction relation, which potentially gets missed by
ReductionDescriptor.
As follow-ups, we can also sink stores, iff they do not alias with
other instructions we move them across and we could also support sinking
chains of instructions and multiple users of the PHI.
Fixes PR43398.
Reviewers: hsaito, dcaballe, Ayal, rengolin
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D69228
Currently every time we encounter an indirect call of a known function,
we try to evaluate the inline cost of that function. In case of a
recursion, that evaluation never stops.
The solution presented is to evaluate only the indirect call of the
function, while any further indirect calls (of a known function) will be
treated just as direct function calls, which, actually, never tries to
evaluate the call.
Fixes PR35469.
Differential Revision: https://reviews.llvm.org/D69349
Remove redundant map searches.
For example, every call to "operator[]" is actually translated to a
"find" call, and 2 consecutive calls to the operator, without changing
the map in-between, is just redundant, and inefficient.
Differential Revision: https://reviews.llvm.org/D69337
moved before another instruction.
Summary:Added an API to check if an instruction can be safely moved
before another instruction. In future PRs, we will like to add support
of moving instructions between blocks that are not control flow
equivalent, and add other APIs to enhance usability, e.g. moving basic
blocks, moving list of instructions...
Loop Fusion will be its first user. When there is intervening code in
between two loops, fusion is currently unable to fuse them. Loop Fusion
can use this utility to check if the intervening code can be safely
moved before or after the two loops, and move them, then it can
successfully fuse them.
Reviewer:kbarton,jdoerfert,Meinersbur,bmahjour,etiotto
Reviewed By:bmahjour
Subscribers:mgorny,hiraditya,llvm-commits
Tag:LLVM
Differential Revision:https://reviews.llvm.org/D70049
Summary:
Most libraries are defined in the lib/ directory but there are also a
few libraries defined in tools/ e.g. libLLVM, libLTO. I'm defining
"Component Libraries" as libraries defined in lib/ that may be included in
libLLVM.so. Explicitly marking the libraries in lib/ as component
libraries allows us to remove some fragile checks that attempt to
differentiate between lib/ libraries and tools/ libraires:
1. In tools/llvm-shlib, because
llvm_map_components_to_libnames(LIB_NAMES "all") returned a list of
all libraries defined in the whole project, there was custom code
needed to filter out libraries defined in tools/, none of which should
be included in libLLVM.so. This code assumed that any library
defined as static was from lib/ and everything else should be
excluded.
With this change, llvm_map_components_to_libnames(LIB_NAMES, "all")
only returns libraries that have been added to the LLVM_COMPONENT_LIBS
global cmake property, so this custom filtering logic can be removed.
Doing this also fixes the build with BUILD_SHARED_LIBS=ON
and LLVM_BUILD_LLVM_DYLIB=ON.
2. There was some code in llvm_add_library that assumed that
libraries defined in lib/ would not have LLVM_LINK_COMPONENTS or
ARG_LINK_COMPONENTS set. This is only true because libraries
defined lib lib/ use LLVMBuild.txt and don't set these values.
This code has been fixed now to check if the library has been
explicitly marked as a component library, which should now make it
easier to remove LLVMBuild at some point in the future.
I have tested this patch on Windows, MacOS and Linux with release builds
and the following combinations of CMake options:
- "" (No options)
- -DLLVM_BUILD_LLVM_DYLIB=ON
- -DLLVM_LINK_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_BUILD_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_LINK_LLVM_DYLIB=ON
Reviewers: beanz, smeenai, compnerd, phosek
Reviewed By: beanz
Subscribers: wuzish, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, mgorny, mehdi_amini, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, steven_wu, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, dang, Jim, lenary, s.egerton, pzheng, sameer.abuasal, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70179
As a reminder, a "widenable branch" is the pattern "br i1 (and i1 X, WC()), label %taken, label %untaken" where "WC" is the widenable condition intrinsics. The semantics of such a branch (derived from the semantics of WC) is that a new condition can be added into the condition arbitrarily without violating legality.
Broaden the definition in two ways:
Allow swapped operands to the br (and X, WC()) form
Allow widenable branch w/trivial condition (i.e. true) which takes form of br i1 WC()
The former is just general robustness (e.g. for X = non-instruction this is what instcombine produces). The later is specifically important as partial unswitching of a widenable range check produces exactly this form above the loop.
Differential Revision: https://reviews.llvm.org/D70502
For the various trip-count tests, the classification isn't useful and makes the auto-generated tests super verbose. By skipping it, we make the auto-gen tests closer to the manually written ones. Up next: auto-genning a bunch of the existings tests.
Simple loop unswitch likes to leave around unsimplified and/or/xors. SCEV today bails out on these idioms which is unfortunate in general, and specifically for the unswitch interaction.
Differential Revision: https://reviews.llvm.org/D70459
Moving accesses in MemorySSA at InsertionPlace::End, when an instruction is
moved into a block, almost always means insert at the end of the block, but
before the block terminator. This matters when the block terminator is a
MemoryAccess itself (an invoke), and the insertion must be done before
the terminator for the update to be correct.
Insert an additional position: InsertionPlace:BeforeTerminator and update
current usages where this applies.
Resolves PR44027.
With the widenable condition construct, we have the ability to reason about branches which can be 'widened' (i.e. made to fail more often). We've got a couple o transforms which leverage this. This patch just cleans up the API a bit.
This is prep work for generalizing our definition of a widenable branch slightly. At the moment "br i1 (and A, wc()), ..." is considered widenable, but oddly, neither "br i1 (and wc(), B), ..." or "br i1 wc(), ..." is. That clearly needs addressed, so first, let's centralize the code in one place.
Summary:
Dependence anlysis has a mechanism to cache results. Thus for particular memory access the cache keep track of side effects in basic blocks. The problem is that for invariant loads dependepce analysis legally ignores many dependencies due to a special semantic rules for such loads. But later results calculated for invariant load retrived from the cache for general case acceses. As a result we have wrong dependence information causing GVN to do illegal transformation. Fixes, T42151.
Proposed solution is to disable caching of invariant loads. I think such loads a pretty rare and it doesn't make sense to extend caching mechanism for them.
Reviewers: reames, chandlerc, skatkov, morisset, jdoerfert
Reviewed By: reames
Subscribers: hiraditya, test, jdoerfert, lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64405
Ensure the stride and trip count have the same type before multiplying them during reference cost calculation
Reviewed By: jdoefert
Differential Revision: https://reviews.llvm.org/D70192
This patch introduces a function pass to inject the scalar-to-vector
mappings stored in the TargetLIbraryInfo (TLI) into the Vector
Function ABI (VFABI) variants attribute.
The test is testing the injection for three vector libraries supported
by the TLI (Accelerate, SVML, MASSV).
The pass does not change any of the analysis associated to the
function.
Differential Revision: https://reviews.llvm.org/D70107
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
This caused miscompiles of Chromium (https://crbug.com/1023818). The reduced
repro is small enough to fit here:
$ cat /tmp/a.c
unsigned char f(unsigned char *p) {
unsigned char result = 0;
for (int shift = 0; shift < 1; ++shift)
result |= p[0] << (shift * 8);
return result;
}
$ bin/clang -O2 -S -o - /tmp/a.c | grep -A4 f:
f: # @f
.cfi_startproc
# %bb.0: # %entry
xorl %eax, %eax
retq
That's nicely optimized, but I don't think it's the right result :-)
> Same as D60846 but with a fix for the problem encountered there which
> was a missing context adjustment in the handling of PHI nodes.
>
> The test that caused D60846 to be reverted was added in e15ab8f277.
>
> Reviewers: nikic, nlopes, mkazantsev,spatel, dlrobertson, uabelho, hakzsam
>
> Subscribers: hiraditya, bollu, llvm-commits
>
> Tags: #llvm
>
> Differential Revision: https://reviews.llvm.org/D69571
This reverts commit 57dd4b03e4.
Summary:
This patch adds a custom ISA for vector functions for internal use
in LLVM. The <isa> token is set to "_LLVM_", and it is not attached
to any specific instruction Vector ISA, or Vector Function ABI.
The ISA is used as a token for handling Vector Function ABI-style
vectorization for those vector functions that are not directly
associated to any existing Vector Function ABI (for example, some of
the vector functions exposed by TargetLibraryInfo). The demangling
function for this ISA in a Vector Function ABI context is set to be
the same as the common one shared between X86 and AArch64.
Reviewers: jdoerfert, sdesmalen, simoll
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70089
Summary:
If there are any internal methods whose address was taken, conclude there is nothing known in relation of any other internal method and a global.
Reviewers: nlopes, sanjoy.google
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69690
Don't try to canonicalize loads to scalable vector types to loads
of integers.
This removes one assertion when trying to use a TypeSize as a parameter
to DataLayout::isLegalInteger. It does not handle the second part of the
function (which looks at bitcasts).
This patch also contains a NFC fix for Load Analysis, where a variable
initialization that would cause the same assertion is moved closer to
its use. This allows us to run the new test for InstCombine without
having to teach LocationSize to play nicely with scalable vectors.
Differential Revision: https://reviews.llvm.org/D70075
The attribute is stored at the `FunctionIndex` attribute set, with the
name "vector-function-abi-variant".
The get/set methods of the attribute have assertion to verify that:
1. Each name in the attribute is a valid VFABI mangled name.
2. Each name in the attribute correspond to a function declared in the
module.
Differential Revision: https://reviews.llvm.org/D69976
Summary:This patch fixes the following warnings uncovered by PVS
Studio:
/home/xbolva00/LLVM/llvm-project/llvm/lib/Analysis/LoopCacheAnalysis.cpp
353 warn V612 An unconditional 'return' within a loop.
/home/xbolva00/LLVM/llvm-project/llvm/lib/Analysis/LoopCacheAnalysis.cpp
456 err V502 Perhaps the '?:' operator works in a different way than it
was expected. The '?:' operator has a lower priority than the '=='
operator.
Authored By:etiotto
Reviewer:Meinersbur, kbarton, bmahjour, Whitney, xbolva00
Reviewed By:xbolva00
Subscribers:hiraditya, llvm-commits
Tag:LLVM
Differential Revision:https://reviews.llvm.org/D69821
Summary: A user can force a function to be inlined by specifying the always_inline attribute. Currently, thinlto implementation is not aware of always_inline functions and does not guarantee import of such functions, which in turn can prevent inlining of such functions.
Patch by Bharathi Seshadri <bseshadr@cisco.com>
Reviewers: tejohnson
Reviewed By: tejohnson
Subscribers: mehdi_amini, inglorion, hiraditya, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70014
Summary:
This patch adds Pi Blocks to the DDG. A pi-block represents a group of DDG
nodes that are part of a strongly-connected component of the graph.
Replacing all the SCCs with pi-blocks results in an acyclic representation
of the DDG. For example if we have:
{a -> b}, {b -> c, d}, {c -> a}
the cycle a -> b -> c -> a is abstracted into a pi-block "p" as follows:
{p -> d} with "p" containing: {a -> b}, {b -> c}, {c -> a}
In this implementation the edges between nodes that are part of the pi-block
are preserved. The crossing edges (edges where one end of the edge is in the
set of nodes belonging to an SCC and the other end is outside that set) are
replaced with corresponding edges to/from the pi-block node instead.
Authored By: bmahjour
Reviewer: Meinersbur, fhahn, myhsu, xtian, dmgreen, kbarton, jdoerfert
Reviewed By: Meinersbur
Subscribers: ychen, arphaman, simoll, a.elovikov, mgorny, hiraditya, jfb, wuzish, llvm-commits, jsji, Whitney, etiotto, ppc-slack
Tag: #llvm
Differential Revision: https://reviews.llvm.org/D68827
Fix cache invalidation by not guarding the dereferenced pointer cache
erasure by SeenBlocks. SeenBlocks is only populated when actually
caching a value in the block, which doesn't necessarily have to happen
just because dereferenced pointers were calculated.
-----
Related to D69686. As noted there, LVI currently behaves differently
for integer and pointer values: For integers, the block value is always
valid inside the basic block, while for pointers it is only valid at
the end of the basic block. I believe the integer behavior is the
correct one, and CVP relies on it via its getConstantRange() uses.
The reason for the special pointer behavior is that LVI checks whether
a pointer is dereferenced in a given basic block and marks it as
non-null in that case. Of course, this information is valid only after
the dereferencing instruction, or in conservative approximation,
at the end of the block.
This patch changes the treatment of dereferencability: Instead of
including it inside the block value, we instead treat it as something
similar to an assume (it essentially is a non-nullness assume) and
incorporate this information in intersectAssumeOrGuardBlockValueConstantRange()
if the context instruction is the terminator of the basic block.
This happens either when determining an edge-value internally in LVI,
or when a terminator was explicitly passed to getValueAt(). The latter
case makes this change not fully NFC, because we can now fold
terminator icmps based on the dereferencability information in the
same block. This is the reason why I changed one JumpThreading test
(it would optimize the condition away without the change).
Of course, we do not want to recompute dereferencability on each
intersectAssume call, so we need a new cache for this. The
dereferencability analysis requires walking the entire basic block
and computing underlying objects of all memory operands. This was
previously done separately for each queried pointer value. In the
new implementation (both because this makes the caching simpler,
and because it is faster), I instead only walk the full BB once and
cache all the dereferenced pointers. So the traversal is now performed
only once per BB, instead of once per queried pointer value.
I think the overall model now makes more sense than before, and there
will be no more pitfalls due to differing integer/pointer behavior.
Differential Revision: https://reviews.llvm.org/D69914
This reverts commit 15bc4dc9a8.
clang-cmake-x86_64-sde-avx512-linux buildbot reported quite a few
compile-time regressions in test-suite, will investigate.
Related to D69686. As noted there, LVI currently behaves differently
for integer and pointer values: For integers, the block value is always
valid inside the basic block, while for pointers it is only valid at
the end of the basic block. I believe the integer behavior is the
correct one, and CVP relies on it via its getConstantRange() uses.
The reason for the special pointer behavior is that LVI checks whether
a pointer is dereferenced in a given basic block and marks it as
non-null in that case. Of course, this information is valid only after
the dereferencing instruction, or in conservative approximation,
at the end of the block.
This patch changes the treatment of dereferencability: Instead of
including it inside the block value, we instead treat it as something
similar to an assume (it essentially is a non-nullness assume) and
incorporate this information in intersectAssumeOrGuardBlockValueConstantRange()
if the context instruction is the terminator of the basic block.
This happens either when determining an edge-value internally in LVI,
or when a terminator was explicitly passed to getValueAt(). The latter
case makes this change not fully NFC, because we can now fold
terminator icmps based on the dereferencability information in the
same block. This is the reason why I changed one JumpThreading test
(it would optimize the condition away without the change).
Of course, we do not want to recompute dereferencability on each
intersectAssume call, so we need a new cache for this. The
dereferencability analysis requires walking the entire basic block
and computing underlying objects of all memory operands. This was
previously done separately for each queried pointer value. In the
new implementation (both because this makes the caching simpler,
and because it is faster), I instead only walk the full BB once and
cache all the dereferenced pointers. So the traversal is now performed
only once per BB, instead of once per queried pointer value.
I think the overall model now makes more sense than before, and there
will be no more pitfalls due to differing integer/pointer behavior.
Differential Revision: https://reviews.llvm.org/D69914
It broke Chromium, causing "Instruction does not dominate all uses!" errors.
See https://bugs.chromium.org/p/chromium/issues/detail?id=1022297#c1 for a
reproducer.
> If the recurrence PHI node has a single user, we can sink any
> instruction without side effects, given that all users are dominated by
> the instruction computing the incoming value of the next iteration
> ('Previous'). We can sink instructions that may cause traps, because
> that only causes the trap to occur later, but not on any new paths.
>
> With the relaxed check, we also have to make sure that we do not have a
> direct cycle (meaning PHI user == 'Previous), which indicates a
> reduction relation, which potentially gets missed by
> ReductionDescriptor.
>
> As follow-ups, we can also sink stores, iff they do not alias with
> other instructions we move them across and we could also support sinking
> chains of instructions and multiple users of the PHI.
>
> Fixes PR43398.
>
> Reviewers: hsaito, dcaballe, Ayal, rengolin
>
> Reviewed By: Ayal
>
> Differential Revision: https://reviews.llvm.org/D69228
We had a subtle, but nasty bug in our definition of a widenable branch, and thus in the transforms which used that utility. Specifically, we returned true for any branch which included a widenable condition within it's condition, regardless of whether that widenable condition also had other uses.
The problem is that the result of the WC() call is defined to be one particular value. As such, all users must agree as to what that value is. If we widen a branch without also updating *all other users* of the WC in the same way, we have broken the required semantics.
Most of the textual diff is updating existing transforms not to leave dead uses hanging around. They're largely NFC as the dead instructions would be immediately deleted by other passes. The reason to make these changes is so that the transforms preserve the widenable branch form.
In practice, we don't get bitten by this only because it isn't profitable to CSE WC() calls and the lowering pass from guards uses distinct WC calls per branch.
Differential Revision: https://reviews.llvm.org/D69916
This patch fixes two issues noticed by inspection when going to enable the loop predication code in IndVarSimplify.
Issue 1 - Both the LoopPredication transform, and the already on by default optimizeLoopExits transform, modify the exit count of the exits they modify. (either to 0 or Infinity) Looking at the code more closely, this was not reflected into SCEV and we were instead running later transforms with incorrect SCEVs. Fixing this requires forgetting the loop, weakening a too strong assert, and updating SCEV to not pessimize results when a loop is provable untaken. I haven't been able to find a test case to demonstrate the miscompile.
Issue 2 - For modules without a data layout, we can end up with unsized pointer typed exit counts. Just bail out of this case.
I think these are the last two issues which need addressed before we enable this by default. The code has already survived a decent amount of fuzzing without revealing either of the above.
Differential Revision: https://reviews.llvm.org/D69695
We have two ways to steer creating a predicated vector body over creating a
scalar epilogue. To force this, we have 1) a command line option and 2) a
pragma available. This adds a third: a target hook to TargetTransformInfo that
can be queried whether predication is preferred or not, which allows the
vectoriser to make the decision without forcing it.
While this change behaves as a non-functional change for now, it shows the
required TTI plumbing, usage of this new hook in the vectoriser, and the
beginning of an ARM MVE implementation. I will follow up on this with:
- a complete MVE implementation, see D69845.
- a patch to disable this, i.e. we should respect "vector_predicate(disable)"
and its corresponding loophint.
Differential Revision: https://reviews.llvm.org/D69040
If the recurrence PHI node has a single user, we can sink any
instruction without side effects, given that all users are dominated by
the instruction computing the incoming value of the next iteration
('Previous'). We can sink instructions that may cause traps, because
that only causes the trap to occur later, but not on any new paths.
With the relaxed check, we also have to make sure that we do not have a
direct cycle (meaning PHI user == 'Previous), which indicates a
reduction relation, which potentially gets missed by
ReductionDescriptor.
As follow-ups, we can also sink stores, iff they do not alias with
other instructions we move them across and we could also support sinking
chains of instructions and multiple users of the PHI.
Fixes PR43398.
Reviewers: hsaito, dcaballe, Ayal, rengolin
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D69228
Same as D60846 but with a fix for the problem encountered there which
was a missing context adjustment in the handling of PHI nodes.
The test that caused D60846 to be reverted was added in e15ab8f277.
Reviewers: nikic, nlopes, mkazantsev,spatel, dlrobertson, uabelho, hakzsam
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69571
I left a memory leak in a printer pass which made LSan sad so I remove
the memory leak now to make LSan happy.
Reported and tested by vlad.tsyrklevich.
New code introduced in fe799c97fa caused clang to complain with
../lib/Analysis/MustExecute.cpp:360:34: error: lambda capture 'this' is not used [-Werror,-Wunused-lambda-capture]
GetterTy<LoopInfo> LIGetter = [this](const Function &F) {
^~~~
../lib/Analysis/MustExecute.cpp:365:44: error: lambda capture 'this' is not used [-Werror,-Wunused-lambda-capture]
GetterTy<PostDominatorTree> PDTGetter = [this](const Function &F) {
^~~~
2 errors generated.
Summary:
If a conditional branch is encountered we can try to find a join block
where the execution is known to continue. This means finding a suitable
block, e.g., the immediate post dominator of the conditional branch, and
proofing control will always reach that block.
This patch implements different techniques that work with and without
provided analysis.
Reviewers: uenoku, sstefan1, hfinkel
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68933
We were already going to all of the trouble of computing maximum constant exit counts for each loop exit, we might as well expose them through the API. The change in IndVars is mostly to demonstrate that the wired up code works, but it als very slightly strengthens the transform. The strengthened case is rather narrow though: it requires one exactly analyzeable exit, one imprecisely analyzeable exit (with the upper bound less than the precise one), and one unanalyzeable exit. I coudn't construct a reasonably stable test case.
This does increase the memory usage of the BackedgeTakenCount by a factor of 2 in the worst case.
I also noticed the loop in IndVars is O(#Exits ^ 2). This doesn't change with this patch. A future patch will cache this result inside of SCEV to avoid requering.
This is a first step in figuring out a proper API for maximum (non constant) exit counts. This may evolve a bit as we get experience with the API needs; suggestions very welcome. This patch just tried to provide a framework that we can later add maximum too in a clean and obvious way.
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, jyknight, sdardis, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69216
llvm-svn: 375398
This is a common idiom which arises after induction variables are widened, and we have two or more exit conditions. Interestingly, we don't have instcombine or instsimplify support for this either.
Differential Revision: https://reviews.llvm.org/D69006
llvm-svn: 375349
Remove dead virtual functions from vtables with
replaceNonMetadataUsesWith, so that CGProfile metadata gets cleaned up
correctly.
Original commit message:
Currently, it is hard for the compiler to remove unused C++ virtual
functions, because they are all referenced from vtables, which are referenced
by constructors. This means that if the constructor is called from any live
code, then we keep every virtual function in the final link, even if there
are no call sites which can use it.
This patch allows unused virtual functions to be removed during LTO (and
regular compilation in limited circumstances) by using type metadata to match
virtual function call sites to the vtable slots they might load from. This
information can then be used in the global dead code elimination pass instead
of the references from vtables to virtual functions, to more accurately
determine which functions are reachable.
To make this transformation safe, I have changed clang's code-generation to
always load virtual function pointers using the llvm.type.checked.load
intrinsic, instead of regular load instructions. I originally tried writing
this using clang's existing code-generation, which uses the llvm.type.test
and llvm.assume intrinsics after doing a normal load. However, it is possible
for optimisations to obscure the relationship between the GEP, load and
llvm.type.test, causing GlobalDCE to fail to find virtual function call
sites.
The existing linkage and visibility types don't accurately describe the scope
in which a virtual call could be made which uses a given vtable. This is
wider than the visibility of the type itself, because a virtual function call
could be made using a more-visible base class. I've added a new
!vcall_visibility metadata type to represent this, described in
TypeMetadata.rst. The internalization pass and libLTO have been updated to
change this metadata when linking is performed.
This doesn't currently work with ThinLTO, because it needs to see every call
to llvm.type.checked.load in the linkage unit. It might be possible to
extend this optimisation to be able to use the ThinLTO summary, as was done
for devirtualization, but until then that combination is rejected in the
clang driver.
To test this, I've written a fuzzer which generates random C++ programs with
complex class inheritance graphs, and virtual functions called through object
and function pointers of different types. The programs are spread across
multiple translation units and DSOs to test the different visibility
restrictions.
I've also tried doing bootstrap builds of LLVM to test this. This isn't
ideal, because only classes in anonymous namespaces can be optimised with
-fvisibility=default, and some parts of LLVM (plugins and bugpoint) do not
work correctly with -fvisibility=hidden. However, there are only 12 test
failures when building with -fvisibility=hidden (and an unmodified compiler),
and this change does not cause any new failures for either value of
-fvisibility.
On the 7 C++ sub-benchmarks of SPEC2006, this gives a geomean code-size
reduction of ~6%, over a baseline compiled with "-O2 -flto
-fvisibility=hidden -fwhole-program-vtables". The best cases are reductions
of ~14% in 450.soplex and 483.xalancbmk, and there are no code size
increases.
I've also run this on a set of 8 mbed-os examples compiled for Armv7M, which
show a geomean size reduction of ~3%, again with no size increases.
I had hoped that this would have no effect on performance, which would allow
it to awlays be enabled (when using -fwhole-program-vtables). However, the
changes in clang to use the llvm.type.checked.load intrinsic are causing ~1%
performance regression in the C++ parts of SPEC2006. It should be possible to
recover some of this perf loss by teaching optimisations about the
llvm.type.checked.load intrinsic, which would make it worth turning this on
by default (though it's still dependent on -fwhole-program-vtables).
Differential revision: https://reviews.llvm.org/D63932
llvm-svn: 375094
Add an extra parameter so the backend can take the alignment into
consideration.
Differential Revision: https://reviews.llvm.org/D68400
llvm-svn: 374763
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
llvm-svn: 374634
Currently, it is hard for the compiler to remove unused C++ virtual
functions, because they are all referenced from vtables, which are referenced
by constructors. This means that if the constructor is called from any live
code, then we keep every virtual function in the final link, even if there
are no call sites which can use it.
This patch allows unused virtual functions to be removed during LTO (and
regular compilation in limited circumstances) by using type metadata to match
virtual function call sites to the vtable slots they might load from. This
information can then be used in the global dead code elimination pass instead
of the references from vtables to virtual functions, to more accurately
determine which functions are reachable.
To make this transformation safe, I have changed clang's code-generation to
always load virtual function pointers using the llvm.type.checked.load
intrinsic, instead of regular load instructions. I originally tried writing
this using clang's existing code-generation, which uses the llvm.type.test
and llvm.assume intrinsics after doing a normal load. However, it is possible
for optimisations to obscure the relationship between the GEP, load and
llvm.type.test, causing GlobalDCE to fail to find virtual function call
sites.
The existing linkage and visibility types don't accurately describe the scope
in which a virtual call could be made which uses a given vtable. This is
wider than the visibility of the type itself, because a virtual function call
could be made using a more-visible base class. I've added a new
!vcall_visibility metadata type to represent this, described in
TypeMetadata.rst. The internalization pass and libLTO have been updated to
change this metadata when linking is performed.
This doesn't currently work with ThinLTO, because it needs to see every call
to llvm.type.checked.load in the linkage unit. It might be possible to
extend this optimisation to be able to use the ThinLTO summary, as was done
for devirtualization, but until then that combination is rejected in the
clang driver.
To test this, I've written a fuzzer which generates random C++ programs with
complex class inheritance graphs, and virtual functions called through object
and function pointers of different types. The programs are spread across
multiple translation units and DSOs to test the different visibility
restrictions.
I've also tried doing bootstrap builds of LLVM to test this. This isn't
ideal, because only classes in anonymous namespaces can be optimised with
-fvisibility=default, and some parts of LLVM (plugins and bugpoint) do not
work correctly with -fvisibility=hidden. However, there are only 12 test
failures when building with -fvisibility=hidden (and an unmodified compiler),
and this change does not cause any new failures for either value of
-fvisibility.
On the 7 C++ sub-benchmarks of SPEC2006, this gives a geomean code-size
reduction of ~6%, over a baseline compiled with "-O2 -flto
-fvisibility=hidden -fwhole-program-vtables". The best cases are reductions
of ~14% in 450.soplex and 483.xalancbmk, and there are no code size
increases.
I've also run this on a set of 8 mbed-os examples compiled for Armv7M, which
show a geomean size reduction of ~3%, again with no size increases.
I had hoped that this would have no effect on performance, which would allow
it to awlays be enabled (when using -fwhole-program-vtables). However, the
changes in clang to use the llvm.type.checked.load intrinsic are causing ~1%
performance regression in the C++ parts of SPEC2006. It should be possible to
recover some of this perf loss by teaching optimisations about the
llvm.type.checked.load intrinsic, which would make it worth turning this on
by default (though it's still dependent on -fwhole-program-vtables).
Differential revision: https://reviews.llvm.org/D63932
llvm-svn: 374539
Currently -verify-scev only fails if there is a constant difference
between two BE counts. This misses a lot of cases.
This patch adds a -verify-scev-strict options, which fails for any
non-zero differences, if used together with -verify-scev.
With the stricter checking, some unit tests fail because
of mis-matches, especially around IndVarSimplify.
If there is no reason I am missing for just checking constant deltas, I
am planning on looking into the various failures.
Reviewers: efriedma, sanjoy.google, reames, atrick
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D68592
llvm-svn: 374535
When simplifying a Phi to the unique value found incoming, check that
there wasn't a Phi already created to break a cycle. If so, remove it.
Resolves PR43541.
Some additional nits included.
llvm-svn: 374471
This patch improves the handling of pointer offset in GEP expressions where
one argument is the base pointer. isPointerOffset() is being used by memcpyopt
where current code synthesizes consecutive 32 bytes stores to one store and
two memset intrinsic calls. With this patch, we convert the stores to one
memset intrinsic.
Differential Revision: https://reviews.llvm.org/D67989
llvm-svn: 374454
Summary:
Whenever we get the previous definition, the assumption is that the
recursion starts ina reachable block.
If the recursion starts in an unreachable block, we may recurse
indefinitely. Handle this case by returning LoE if the block is
unreachable.
Resolves PR43426.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68809
llvm-svn: 374447
Move the default implementations of cache and prefetch queries to
TargetTransformInfoImplBase and delete them from NoTIIImpl. This brings these
interfaces in line with how other TTI interfaces work.
Differential Revision: https://reviews.llvm.org/D68804
llvm-svn: 374446
Re-apply 9fdfb045ae8b/r365676 with fixes for PPC and Hexagon. This involved
moving defaults from TargetTransformInfoImplBase to MCSubtargetInfo.
Rework the TTI cache and software prefetching APIs to prepare for the
introduction of a general system model. Changes include:
- Marking existing interfaces const and/or override as appropriate
- Adding comments
- Adding BasicTTIImpl interfaces that delegate to a subtarget
implementation
- Moving the default TargetTransformInfoImplBase implementation to a default
MCSubtarget implementation
Only a handful of targets use these interfaces currently: AArch64, Hexagon, PPC
and SystemZ. AArch64 already has a custom subtarget implementation, so its
custom TTI implementation is migrated to use the new facilities in BasicTTIImpl
to invoke its custom subtarget implementation. The custom TTI implementations
continue to exist for the other targets with this change. They are not moved
over to subtarget-based implementations.
The end goal is to have the default subtarget implementation defer to the system
model defined by the target. With this change, the default MCSubtargetInfo
implementation essentially returns the defaults TargetTransformInfoImplBase used
to return. Existing users of TTI defaults will hit the defaults now in
MCSubtargetInfo. Targets that define their own custom TTI implementations won't
use the BasicTTIImpl implementations that route to the subtarget.
Once system models are in place for the targets that use these interfaces, their
custom TTI implementations can be removed.
Differential Revision: https://reviews.llvm.org/D63614
llvm-svn: 374205
Summary:
The rule for the moveAllAfterMergeBlocks API si for all instructions
from `From` to have been moved to `To`, while keeping the CFG edges (and
block terminators) unchanged.
Update all the callsites for moveAllAfterMergeBlocks to follow this.
Pending follow-up: since the same behavior is needed everytime, merge
all callsites into one. The common denominator may be the call to
`MergeBlockIntoPredecessor`.
Resolves PR43569.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68659
llvm-svn: 374177
Also Revert "[LoopVectorize] Fix non-debug builds after rL374017"
This reverts commit 9f41deccc0.
This reverts commit 18b6fe07bc.
The patch is breaking PowerPC internal build, checked with author, reverting
on behalf of him for now due to timezone.
llvm-svn: 374091
* Adds a TypeSize struct to represent the known minimum size of a type
along with a flag to indicate that the runtime size is a integer multiple
of that size
* Converts existing size query functions from Type.h and DataLayout.h to
return a TypeSize result
* Adds convenience methods (including a transparent conversion operator
to uint64_t) so that most existing code 'just works' as if the return
values were still scalars.
* Uses the new size queries along with ElementCount to ensure that all
supported instructions used with scalable vectors can be constructed
in IR.
Reviewers: hfinkel, lattner, rkruppe, greened, rovka, rengolin, sdesmalen
Reviewed By: rovka, sdesmalen
Differential Revision: https://reviews.llvm.org/D53137
llvm-svn: 374042
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
llvm-svn: 374017
Doing this makes MSVC complain that `empty(someRange)` could refer to
either C++17's std::empty or LLVM's llvm::empty, which previously we
avoided via SFINAE because std::empty is defined in terms of an empty
member rather than begin and end. So, switch callers over to the new
method as it is added.
https://reviews.llvm.org/D68439
llvm-svn: 373935
This reverts SVN r373833, as it caused a failed assert "Non-zero loop
cost expected" on building numerous projects, see PR43582 for details
and reproduction samples.
llvm-svn: 373882
Summary: The assertion in getLoopGuardBranch can be a 'return nullptr'
under if condition.
Authored By: DTharun
Reviewer: Whitney, fhahn
Reviewed By: Whitney, fhahn
Subscribers: fhahn, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D66084
llvm-svn: 373857
I don't see an ideal solution to these 2 related, potentially large, perf regressions:
https://bugs.llvm.org/show_bug.cgi?id=42708https://bugs.llvm.org/show_bug.cgi?id=43146
We decided that load combining was unsuitable for IR because it could obscure other
optimizations in IR. So we removed the LoadCombiner pass and deferred to the backend.
Therefore, preventing SLP from destroying load combine opportunities requires that it
recognizes patterns that could be combined later, but not do the optimization itself (
it's not a vector combine anyway, so it's probably out-of-scope for SLP).
Here, we add a scalar cost model adjustment with a conservative pattern match and cost
summation for a multi-instruction sequence that can probably be reduced later.
This should prevent SLP from creating a vector reduction unless that sequence is
extremely cheap.
In the x86 tests shown (and discussed in more detail in the bug reports), SDAG combining
will produce a single instruction on these tests like:
movbe rax, qword ptr [rdi]
or:
mov rax, qword ptr [rdi]
Not some (half) vector monstrosity as we currently do using SLP:
vpmovzxbq ymm0, dword ptr [rdi + 1] # ymm0 = mem[0],zero,zero,..
vpsllvq ymm0, ymm0, ymmword ptr [rip + .LCPI0_0]
movzx eax, byte ptr [rdi]
movzx ecx, byte ptr [rdi + 5]
shl rcx, 40
movzx edx, byte ptr [rdi + 6]
shl rdx, 48
or rdx, rcx
movzx ecx, byte ptr [rdi + 7]
shl rcx, 56
or rcx, rdx
or rcx, rax
vextracti128 xmm1, ymm0, 1
vpor xmm0, xmm0, xmm1
vpshufd xmm1, xmm0, 78 # xmm1 = xmm0[2,3,0,1]
vpor xmm0, xmm0, xmm1
vmovq rax, xmm0
or rax, rcx
vzeroupper
ret
Differential Revision: https://reviews.llvm.org/D67841
llvm-svn: 373833
MemoryPhis should be added in the IDF of the blocks newly gaining Defs.
This includes the blocks that gained a Phi and the block gaining a Def,
if the block did not have one before.
Resolves PR43427.
llvm-svn: 373505
The static analyzer is warning about a potential null dereference, but we should be able to use cast<MemoryAccess> directly and if not assert will fire for us.
llvm-svn: 373467
The static analyzer is warning about potential null dereferences, but in these cases we should be able to use cast<SCEVConstant> directly and if not assert will fire for us.
llvm-svn: 373465
In similar fashion to D67721, we can simplify FMA multiplications if any
of the operands is NaN or undef. In instcombine, we will simplify the
FMA to an fadd with a NaN operand, which in turn gets folded to NaN.
Note that this just changes SimplifyFMAFMul, so we still not catch the
case where only the Add part of the FMA is Nan/Undef.
Reviewers: cameron.mcinally, mcberg2017, spatel, arsenm
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D68265
llvm-svn: 373459
This is intended to be similar to the constant folding results from
D67446
and earlier, but not all operands are constant in these tests, so the
responsibility for folding is left to InstSimplify.
Differential Revision: https://reviews.llvm.org/D67721
llvm-svn: 373455
Summary:
This patch adds Root Node to the DDG. The purpose of the root node is to create a single entry node that allows graph walk iterators to iterate through all nodes of the graph, making sure that no node is left unvisited during a graph walk (eg. SCC or DFS). Once the DDG is fully constructed it will have exactly one root node. Every node in the graph is reachable from the root. The algorithm for connecting the root node is based on depth-first-search that keeps track of visited nodes to try to avoid creating unnecessary edges.
Authored By: bmahjour
Reviewer: Meinersbur, fhahn, myhsu, xtian, dmgreen, kbarton, jdoerfert
Reviewed By: Meinersbur
Subscribers: ychen, arphaman, simoll, a.elovikov, mgorny, hiraditya, jfb, wuzish, llvm-commits, jsji, Whitney, etiotto, ppc-slack
Tag: #llvm
Differential Revision: https://reviews.llvm.org/D67970
llvm-svn: 373386
If a single predecessor is found, still check if the block is
unreachable. The test that found this had a self loop unreachable block.
Resolves PR43493.
llvm-svn: 373383
The check for "was there an access in this block" should be: is the last
access in this block and is it not a newly inserted phi.
Resolves new test in PR43438.
Also fix a typo when simplifying trivial Phis to match the comment.
llvm-svn: 373380
This reverts r366419 because the analysis performed is within the context of
the loop and it's only valid to add wrapping flags to "global" expressions if
they're always correct.
llvm-svn: 373184
exits"
Get a better approach in https://reviews.llvm.org/D68107 to solve the problem.
Revert the initial patch and will commit the new one soon.
This reverts commit rL372990.
llvm-svn: 373044
Summary: As discussed in the loop group meeting. With the current
definition of loop guard, we should not allow multiple loop exiting
blocks. For loops that has multiple loop exiting blocks, we can simply
unable to find the loop guard.
When getUniqueExitBlock() obtains a vector size not equals to one, that
means there is either no exit blocks or there exists more than one
unique block the loop exit to.
If we don't disallow loop with multiple loop exit blocks, then with our
current implementation, there can exist exit blocks don't post dominated
by the non pre-header successor of the guard block.
Reviewer: reames, Meinersbur, kbarton, etiotto, bmahjour
Reviewed By: Meinersbur, kbarton
Subscribers: fhahn, hiraditya, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D66529
llvm-svn: 373011
The static analyzer is warning about a potential null dereference, but we should be able to use cast<ExtractValueInst> directly and if not assert will fire for us.
llvm-svn: 372993
for extreme large case.
We had a case that a single loop which has 4000 exits and the average number
of predecessors of each exit is > 1000, and we found compiling the case spent
a significant amount of time on checking whether a loop has dedicated exits.
This patch adds a limit for the iterations to the check. With the patch, the
time to compile our testcase reduced from 1000s to 200s (clang release build).
Differential Revision: https://reviews.llvm.org/D67359
llvm-svn: 372990
The static analyzer is warning about a potential null dereferences, but since the pointer is only used in a switch statement for Operator::getOpcode() (with an empty default) then its easiest just to wrap this in a null test as the dyn_cast might return null here.
llvm-svn: 372962
Previously we might attempt to use a BitCast to turn bits into vectors of pointers,
but that requires an inttoptr cast to be legal. Add an assertion to detect the formation of illegal bitcast attempts
early (in the tests, we often constant-fold away the result before getting to this assertion check),
while being careful to still handle the early-return conditions without adding extra complexity in the result.
Patch by Jameson Nash <jameson@juliacomputing.com>.
Differential Revision: https://reviews.llvm.org/D65057
llvm-svn: 372940
Summary:
If a block has all incoming values with the same MemoryAccess (ignoring
incoming values from unreachable blocks), then use that incoming
MemoryAccess and do not create a Phi in the first place.
Revert IDF work-around added in rL372673; it should not be required unless
the Def inserted is the first in its block.
The patch also cleans up a series of tests, added during the many
iterations on insertDef.
The patch also fixes PR43438.
The same issue that occurs in insertDef with "adding phis, hence the IDF of
Phis is needed", can also occur in fixupDefs: the `getPreviousRecursive`
call only adds Phis walking on the predecessor edges, which means there
may be the case of a Phi added walking the CFG "backwards" which
triggers the needs for an additional Phi in successor blocks.
Such Phis are added during fixupDefs only in the presence of unreachable
blocks.
Hence this highlights the need to avoid adding Phis in blocks with
unreachable predecessors in the first place.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67995
llvm-svn: 372932
Because we do not constant fold multiplications in SimplifyFMAMul,
we match 1.0 and 0.0 for both operands, as multiplying by them
is guaranteed to produce an exact result (if it is allowed to do so).
Note that it is not enough to just swap the operands to ensure a
constant is on the RHS, as we want to also cover the case with
2 constants.
Reviewers: lebedev.ri, spatel, reames, scanon
Reviewed By: lebedev.ri, reames
Differential Revision: https://reviews.llvm.org/D67553
llvm-svn: 372915
As @reames pointed out post-commit, rL371518 adds additional rounding
in some cases, when doing constant folding of the multiplication.
This breaks a guarantee llvm.fma makes and must be avoided.
This patch reapplies rL371518, but splits off the simplifications not
requiring rounding from SimplifFMulInst as SimplifyFMAFMul.
Reviewers: spatel, lebedev.ri, reames, scanon
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D67434
llvm-svn: 372899
Currently m_Br only takes references to BasicBlock*, which limits its
flexibility. For example, you have to declare a variable, even if you
ignore the result or you have to have additional checks to make sure the
matched BB matches an expected one.
This patch adds m_BasicBlock and m_SpecificBB matchers, which can be
used like the existing matchers for constants or values.
I also had a look at the existing uses and updated a few. IMO it makes
the code a bit more explicit.
Reviewers: spatel, craig.topper, RKSimon, majnemer, lebedev.ri
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D68013
llvm-svn: 372885
The changes here are based on the corresponding diffs for allowing FMF on 'select':
D61917 <https://reviews.llvm.org/D61917>
As discussed there, we want to have fast-math-flags be a property of an FP value
because the alternative (having them on things like fcmp) leads to logical
inconsistency such as:
https://bugs.llvm.org/show_bug.cgi?id=38086
The earlier patch for select made almost no practical difference because most
unoptimized conditional code begins life as a phi (based on what I see in clang).
Similarly, I don't expect this patch to do much on its own either because
SimplifyCFG promptly drops the flags when converting to select on a minimal
example like:
https://bugs.llvm.org/show_bug.cgi?id=39535
But once we have this plumbing in place, we should be able to wire up the FMF
propagation and start solving cases like that.
The change to RecurrenceDescriptor::AddReductionVar() is required to prevent a
regression in a LoopVectorize test. We are intersecting the FMF of any
FPMathOperator there, so if a phi is not properly annotated, new math
instructions may not be either. Once we fix the propagation in SimplifyCFG, it
may be safe to remove that hack.
Differential Revision: https://reviews.llvm.org/D67564
llvm-svn: 372878
The changes here are based on the corresponding diffs for allowing FMF on 'select':
D61917
As discussed there, we want to have fast-math-flags be a property of an FP value
because the alternative (having them on things like fcmp) leads to logical
inconsistency such as:
https://bugs.llvm.org/show_bug.cgi?id=38086
The earlier patch for select made almost no practical difference because most
unoptimized conditional code begins life as a phi (based on what I see in clang).
Similarly, I don't expect this patch to do much on its own either because
SimplifyCFG promptly drops the flags when converting to select on a minimal
example like:
https://bugs.llvm.org/show_bug.cgi?id=39535
But once we have this plumbing in place, we should be able to wire up the FMF
propagation and start solving cases like that.
The change to RecurrenceDescriptor::AddReductionVar() is required to prevent a
regression in a LoopVectorize test. We are intersecting the FMF of any
FPMathOperator there, so if a phi is not properly annotated, new math
instructions may not be either. Once we fix the propagation in SimplifyCFG, it
may be safe to remove that hack.
Differential Revision: https://reviews.llvm.org/D67564
llvm-svn: 372866
Summary:
MemoryPhis may be needed following a Def insertion inthe IDF of all the
new accesses added (phis + potentially a def). Ensure this also occurs when
only the new MemoryPhis are the defining accesses.
Note: The need for computing IDF here is because of new Phis added with
edges incoming from unreachable code, Phis that had previously been
simplified. The preferred solution is to not reintroduce such Phis.
This patch is the needed fix while working on the preferred solution.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67927
llvm-svn: 372673
Static analyzer complains about const_cast uninitialized variables, we should explicitly set these to null.
Ideally that const wrapper would go away though.......
llvm-svn: 372603
Summary:
The CallAnalyzer::visitSwitchInst has an early exit when the estimated
lower bound of the switch cost will put the overall cost of the inline
above the threshold. However, this code is not correctly estimating the
lower bound for switches that can be transformed into bit tests, leading
to unnecessary lost inlines, and also differing behavior with
optimization remarks enabled.
First, the early exit is controlled by whether ComputeFullInlineCost is
enabled or not, and that in turn is disabled by default but enabled when
enabling -pass-remarks=missed. This by itself wouldn't lead to a
problem, except that as described below, the lower bound can be above
the real lower bound, so we can sometimes get different inline decisions
with inline remarks enabled, which is problematic.
The early exit was added in along with a new switch cost model in D31085.
The reason why this early exit was added is due to a concern one reviewer
raised about compile time for large switches:
https://reviews.llvm.org/D31085?id=94559#inline-276200
However, the code just below there calls
getEstimatedNumberOfCaseClusters, which in turn immediately calls
BasicTTIImpl getEstimatedNumberOfCaseClusters, which in the worst case
does a linear scan of the cases to get the high and low values. The
bit test handling in particular is guarded by whether the number of
cases fits into the max bit width. There is no suggestion that anyone
measured a compile time issue, it appears to be theoretical.
The problem is that the reviewer's comment about the lower bound
calculation is incorrect, specifically in the case of a switch that can
be lowered to a bit test. This isn't followed up on the comment
thread, but the author does add a FIXME to that effect above the early
exit added when they subsequently revised the patch.
As a result, we were incorrectly early exiting and not inlining
functions with switch statements that would be lowered to bit tests in
cases where we were nearing the threshold. Combined with the fact that
this early exit was skipped with opt remarks enabled, this caused
different inlining decisions to be made when -pass-remarks=missed is
enabled to debug the missing inline.
Remove the early exit for the above reasons.
I also copied over an existing AArch64 inlining test to X86, and
adjusted the threshold so that the bit test inline only occurs with the
fix in this patch.
Reviewers: davidxl
Subscribers: eraman, kristof.beyls, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67716
llvm-svn: 372440
At present, `-scalar-evolution-max-iterations` is a `cl::Optional`
option, which means it demands to be passed exactly zero or one times.
Our build system makes it pretty tricky to guarantee this. We often
accidentally pass the flag more than once (but always with the same
value) which results in an error, after which compilation fails:
```
clang (LLVM option parsing): for the -scalar-evolution-max-iterations option: may only occur zero or one times!
```
It seems reasonable to allow -scalar-evolution-max-iterations to be
passed more than once. Quoting the [[ http://llvm.org/docs/CommandLine.html#controlling-the-number-of-occurrences-required-and-allowed | documentation ]]:
> The cl::ZeroOrMore modifier ... indicates that your program will allow the option to be specified zero or more times.
> ...
> If an option is specified multiple times for an option of the cl::opt class, only the last value will be retained.
Original patch by: Enrico Bern Hardy Tanuwidjaja <etanuwid@fb.com>
Differential Revision: https://reviews.llvm.org/D67512
llvm-svn: 372346
This patch implements the demangling functionality as described in the
Vector Function ABI. This patch will be used to implement the
SearchVectorFunctionSystem (SVFS) as described in the RFC:
http://lists.llvm.org/pipermail/llvm-dev/2019-June/133484.html
A fuzzer is added to test the demangling utility.
Patch by Sumedh Arani <sumedh.arani@arm.com>
Differential revision: https://reviews.llvm.org/D66024
llvm-svn: 372343
Summary:
This is the first patch in a series of patches that will implement data dependence graph in LLVM. Many of the ideas used in this implementation are based on the following paper:
D. J. Kuck, R. H. Kuhn, D. A. Padua, B. Leasure, and M. Wolfe (1981). DEPENDENCE GRAPHS AND COMPILER OPTIMIZATIONS.
This patch contains support for a basic DDGs containing only atomic nodes (one node for each instruction). The edges are two fold: def-use edges and memory-dependence edges.
The implementation takes a list of basic-blocks and only considers dependencies among instructions in those basic blocks. Any dependencies coming into or going out of instructions that do not belong to those basic blocks are ignored.
The algorithm for building the graph involves the following steps in order:
1. For each instruction in the range of basic blocks to consider, create an atomic node in the resulting graph.
2. For each node in the graph establish def-use edges to/from other nodes in the graph.
3. For each pair of nodes containing memory instruction(s) create memory edges between them. This part of the algorithm goes through the instructions in lexicographical order and creates edges in reverse order if the sink of the dependence occurs before the source of it.
Authored By: bmahjour
Reviewer: Meinersbur, fhahn, myhsu, xtian, dmgreen, kbarton, jdoerfert
Reviewed By: Meinersbur, fhahn, myhsu
Subscribers: ychen, arphaman, simoll, a.elovikov, mgorny, hiraditya, jfb, wuzish, llvm-commits, jsji, Whitney, etiotto
Tag: #llvm
Differential Revision: https://reviews.llvm.org/D65350
llvm-svn: 372238
Summary:
This fixes B42473 and B42706.
This patch makes the SDA propagate branch divergence until the end of the RPO traversal. Before, the SyncDependenceAnalysis propagated divergence only until the IPD in rpo order. RPO is incompatible with post dominance in the presence of loops. This made the SDA crash because blocks were missed in the propagation.
Reviewers: foad, nhaehnle
Reviewed By: foad
Subscribers: jvesely, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65274
llvm-svn: 372223
Summary:
This is the first patch in a series of patches that will implement data dependence graph in LLVM. Many of the ideas used in this implementation are based on the following paper:
D. J. Kuck, R. H. Kuhn, D. A. Padua, B. Leasure, and M. Wolfe (1981). DEPENDENCE GRAPHS AND COMPILER OPTIMIZATIONS.
This patch contains support for a basic DDGs containing only atomic nodes (one node for each instruction). The edges are two fold: def-use edges and memory-dependence edges.
The implementation takes a list of basic-blocks and only considers dependencies among instructions in those basic blocks. Any dependencies coming into or going out of instructions that do not belong to those basic blocks are ignored.
The algorithm for building the graph involves the following steps in order:
1. For each instruction in the range of basic blocks to consider, create an atomic node in the resulting graph.
2. For each node in the graph establish def-use edges to/from other nodes in the graph.
3. For each pair of nodes containing memory instruction(s) create memory edges between them. This part of the algorithm goes through the instructions in lexicographical order and creates edges in reverse order if the sink of the dependence occurs before the source of it.
Authored By: bmahjour
Reviewer: Meinersbur, fhahn, myhsu, xtian, dmgreen, kbarton, jdoerfert
Reviewed By: Meinersbur, fhahn, myhsu
Subscribers: ychen, arphaman, simoll, a.elovikov, mgorny, hiraditya, jfb, wuzish, llvm-commits, jsji, Whitney, etiotto
Tag: #llvm
Differential Revision: https://reviews.llvm.org/D65350
llvm-svn: 372162
Summary:
When inserting a Def, the current algorithm is walking edges backward
and inserting new Phis where needed. There may be additional Phis needed
in the IDF of the newly inserted Def and Phis.
Adding Phis in the IDF of the Def was added ina previous patch, but we
may also need other Phis in the IDF of the newly added Phis.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67637
llvm-svn: 372138
Summary:
Regularly when moving an instruction that may not read or write memory,
the instruction is not modelled in MSSA, so not action is necessary.
For a non-conventional AA pipeline, MSSA needs to explicitly check when
creating accesses, so as to not model instructions that may not read and
write memory.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67562
llvm-svn: 372137
We were failing to compute trip counts (both exact and maximum) for any loop which involved a comparison against either an umin or smin. It looks like this simply got missed when we added smin/umin to SCEV. (Note: umin was submitted separately earlier today. Turned out two folks hit this at the same time.)
Differential Revision: https://reviews.llvm.org/D67514
llvm-svn: 371776
Expanding the folding of `nearbyint()`, `rint()` and `trunc()` to library
functions, in addition to the current support for intrinsics.
Differential revision: https://reviews.llvm.org/D67468
llvm-svn: 371774
This patch adds support for SCEVUMinExpr to getRangeRef,
similar to the support for SCEVUMaxExpr.
Reviewers: sanjoy.google, efriedma, reames, nikic
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D67177
llvm-svn: 371768
Implement a TODO from rL371452, and handle loop invariant addresses in predicated blocks. If we can prove that the load is safe to speculate into the header, then we can avoid using a masked.load in favour of a normal load.
This is mostly about vectorization robustness. In the common case, it's generally expected that LICM/LoadStorePromotion would have eliminated such loads entirely.
Differential Revision: https://reviews.llvm.org/D67372
llvm-svn: 371745
Folding for fma/fmuladd was added here:
rL202914
...and as seen in existing/unchanged tests, that works to propagate NaN
if it's already an input, but we should fold an fma() that creates NaN too.
From IEEE-754-2008 7.2 "Invalid Operation", there are 2 clauses that apply
to fma, so I added tests for those patterns:
c) fusedMultiplyAdd: fusedMultiplyAdd(0, ∞, c) or fusedMultiplyAdd(∞, 0, c)
unless c is a quiet NaN; if c is a quiet NaN then it is implementation
defined whether the invalid operation exception is signaled
d) addition or subtraction or fusedMultiplyAdd: magnitude subtraction of
infinities, such as: addition(+∞, −∞)
Differential Revision: https://reviews.llvm.org/D67446
llvm-svn: 371735
Summary:
I don't have a direct motivational case for this,
but it would be good to have this for completeness/symmetry.
This pattern is basically the motivational pattern from
https://bugs.llvm.org/show_bug.cgi?id=43251
but with different predicate that requires that the offset is non-zero.
The completeness bit comes from the fact that a similar pattern (offset != zero)
will be needed for https://bugs.llvm.org/show_bug.cgi?id=43259,
so it'd seem to be good to not overlook very similar patterns..
Proofs: https://rise4fun.com/Alive/21b
Also, there is something odd with `isKnownNonZero()`, if the non-zero
knowledge was specified as an assumption, it didn't pick it up (PR43267)
Reviewers: spatel, nikic, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67411
llvm-svn: 371718
When possible, replace calls to library routines on the host with equivalent
ones in LLVM.
Differential revision: https://reviews.llvm.org/D67459
llvm-svn: 371677
This was actually the original intention in D67332,
but i messed up and forgot about it.
This patch was originally part of D67411, but precommitting this.
llvm-svn: 371630
Configure TLI to say that r600/amdgpu does not have any library
functions, such that InstCombine does not do anything like turn sin/cos
into the library function @tan with sufficient fast math flags.
Differential Revision: https://reviews.llvm.org/D67406
Change-Id: I02f907d3e64832117ea9800e9f9285282856e5df
llvm-svn: 371592
Summary:
Do not model debuginfo intrinsics in MemorySSA.
Regularly these are non-memory modifying instructions. With -disable-basicaa, they were being modelled as Defs.
Reviewers: george.burgess.iv
Subscribers: aprantl, Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67307
llvm-svn: 371565
Expose a utility function so that all places which want to suppress speculation (when otherwise legal) due to ordering and/or sanitizer interaction can do so.
llvm-svn: 371556
Since NaN is very rare in normal programs, so the probability for floating point unordered comparison should be extremely small. Current probability is 3/8, it is too large, this patch changes it to a tiny number.
Differential Revision: https://reviews.llvm.org/D65303
llvm-svn: 371541
Summary:
This is motivated by D67122 sanitizer check enhancement.
That patch seemingly worsens `-fsanitize=pointer-overflow`
overhead from 25% to 50%, which strongly implies missing folds.
In this particular case, given
```
char* test(char& base, unsigned long offset) {
return &base + offset;
}
```
it will end up producing something like
https://godbolt.org/z/LK5-iH
which after optimizations reduces down to roughly
```
define i1 @t0(i8* nonnull %base, i64 %offset) {
%base_int = ptrtoint i8* %base to i64
%adjusted = add i64 %base_int, %offset
%non_null_after_adjustment = icmp ne i64 %adjusted, 0
%no_overflow_during_adjustment = icmp uge i64 %adjusted, %base_int
%res = and i1 %non_null_after_adjustment, %no_overflow_during_adjustment
ret i1 %res
}
```
Without D67122 there was no `%non_null_after_adjustment`,
and in this particular case we can get rid of the overhead:
Here we add some offset to a non-null pointer,
and check that the result does not overflow and is not a null pointer.
But since the base pointer is already non-null, and we check for overflow,
that overflow check will already catch the null pointer,
so the separate null check is redundant and can be dropped.
Alive proofs:
https://rise4fun.com/Alive/WRzq
There are more patterns of "unsigned-add-with-overflow", they are not handled here,
but this is the main pattern, that we currently consider canonical,
so it makes sense to handle it.
https://bugs.llvm.org/show_bug.cgi?id=43246
Reviewers: spatel, nikic, vsk
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits, reames
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67332
llvm-svn: 371349
Summary:
Add an intrinsic that takes 2 unsigned integers with
the scale of them provided as the third argument and
performs fixed point multiplication on them. The
result is saturated and clamped between the largest and
smallest representable values of the first 2 operands.
This is a part of implementing fixed point arithmetic
in clang where some of the more complex operations
will be implemented as intrinsics.
Patch by: leonardchan, bjope
Reviewers: RKSimon, craig.topper, bevinh, leonardchan, lebedev.ri, spatel
Reviewed By: leonardchan
Subscribers: ychen, wuzish, nemanjai, MaskRay, jsji, jdoerfert, Ka-Ka, hiraditya, rjmccall, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57836
llvm-svn: 371308
This addresses the issue mentioned on D19867. When we simplify
with.overflow instructions in CVP, we leave behind extractvalue
of insertvalue sequences that LVI no longer understands. This
means that we can not simplify any instructions based on the
with.overflow anymore (until some over pass like InstCombine
cleans them up).
This patch extends LVI extractvalue handling by calling
SimplifyExtractValueInst (which doesn't do anything more than
constant folding + looking through insertvalue) and using the block
value of the simplification.
A possible alternative would be to do something similar to
SimplifyIndVars, where we instead directly try to replace
extractvalue users of the with.overflow. This would need some
additional structural changes to CVP, as it's currently not legal
to remove anything but the current instruction -- we'd have to
introduce a worklist with instructions scheduled for deletion or similar.
Differential Revision: https://reviews.llvm.org/D67035
llvm-svn: 371306
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
llvm-svn: 371284
Summary:
I'm not planning to check this in at the moment, but feedback is very welcome, in particular how this affects performance.
The feedback obtains here will guide the next steps towards enabling this.
This patch enables the use of MemorySSA in the loop pass manager.
Passes that currently use MemorySSA:
- EarlyCSE
Passes that use MemorySSA after this patch:
- EarlyCSE
- LICM
- SimpleLoopUnswitch
Loop passes that update MemorySSA (and do not use it yet, but could use it after this patch):
- LoopInstSimplify
- LoopSimplifyCFG
- LoopUnswitch
- LoopRotate
- LoopSimplify
- LCSSA
Loop passes that do *not* update MemorySSA:
- IndVarSimplify
- LoopDelete
- LoopIdiom
- LoopSink
- LoopUnroll
- LoopInterchange
- LoopUnrollAndJam
- LoopVectorize
- LoopReroll
- IRCE
Reviewers: chandlerc, george.burgess.iv, davide, sanjoy, gberry
Subscribers: jlebar, Prazek, dmgreen, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58311
llvm-svn: 370384
Summary:
Now that with D65143/D65144 we've produce `@llvm.umul.with.overflow`,
and with D65147 we've flattened the CFG, we now can see that
the guard may have been there to prevent division by zero is redundant.
We can simply drop it:
```
----------------------------------------
Name: no overflow or zero
%iszero = icmp eq i4 %y, 0
%umul = smul_overflow i4 %x, %y
%umul.ov = extractvalue {i4, i1} %umul, 1
%umul.ov.not = xor %umul.ov, -1
%retval.0 = or i1 %iszero, %umul.ov.not
ret i1 %retval.0
=>
%iszero = icmp eq i4 %y, 0
%umul = smul_overflow i4 %x, %y
%umul.ov = extractvalue {i4, i1} %umul, 1
%umul.ov.not = xor %umul.ov, -1
%retval.0 = or i1 %iszero, %umul.ov.not
ret i1 %umul.ov.not
Done: 1
Optimization is correct!
```
Note that this is inverted from what we have in a previous patch,
here we are looking for the inverted overflow bit.
And that inversion is kinda problematic - given this particular
pattern we neither hoist that `not` closer to `ret` (then the pattern
would have been identical to the one without inversion,
and would have been handled by the previous patch), neither
do the opposite transform. But regardless, we should handle this too.
I've filled [[ https://bugs.llvm.org/show_bug.cgi?id=42720 | PR42720 ]].
Reviewers: nikic, spatel, xbolva00, RKSimon
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65151
llvm-svn: 370351
Summary:
Now that with D65143/D65144 we've produce `@llvm.umul.with.overflow`,
and with D65147 we've flattened the CFG, we now can see that
the guard may have been there to prevent division by zero is redundant.
We can simply drop it:
```
----------------------------------------
Name: no overflow and not zero
%iszero = icmp ne i4 %y, 0
%umul = umul_overflow i4 %x, %y
%umul.ov = extractvalue {i4, i1} %umul, 1
%retval.0 = and i1 %iszero, %umul.ov
ret i1 %retval.0
=>
%iszero = icmp ne i4 %y, 0
%umul = umul_overflow i4 %x, %y
%umul.ov = extractvalue {i4, i1} %umul, 1
%retval.0 = and i1 %iszero, %umul.ov
ret %umul.ov
Done: 1
Optimization is correct!
```
Reviewers: nikic, spatel, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65150
llvm-svn: 370350
The code we had isSafeToLoadUnconditionally was blatantly wrong. This function takes a "Size" argument which is supposed to describe the span loaded from. Instead, the code use the size of the pointer passed (which may be unrelated!) and only checks that span. For any Size > LoadSize, this can and does lead to miscompiles.
Worse, the generic code just a few lines above correctly handles the cases which *are* valid. So, let's delete said code.
Removing this code revealed two issues:
1) As noted by jdoerfert the removed code incorrectly handled external globals. The test update in SROA is to stop testing incorrect behavior.
2) SROA was confusing bytes and bits, but this wasn't obvious as the Size parameter was being essentially ignored anyway. Fixed.
Differential Revision: https://reviews.llvm.org/D66778
llvm-svn: 370102
Summary:
We already use the fact that an object with known size X does not alias
another objection of size Y > X before. With this commit, we use
dereferenceability information to determine a lower bound for Y and not
only rely on the user provided query size.
The result for @global_and_deref_arg_2() and @local_and_deref_ret_2()
in test/Analysis/BasicAA/dereferenceable.ll improved with this patch.
Reviewers: asbirlea, chandlerc, hfinkel, sanjoy
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66157
llvm-svn: 369786
Given an instruction I, the MustBeExecutedContextExplorer allows to
easily traverse instructions that are guaranteed to be executed whenever
I is. For now, these instruction have to be statically "after" I, in
the same or different basic blocks.
This patch also adds a pass which prints the must-be-executed-context
for each instruction in a module. It is used to test the
MustBeExecutedContextExplorer, for now on the examples given in the
class comment of the MustBeExecutedIterator.
Differential Revision: https://reviews.llvm.org/D65186
llvm-svn: 369765
I noticed another instance of the issue where references to aliases were
being replaced with aliasees, this time in InstCombine. In the instance that
I saw it turned out to be only a QoI issue (a symbol ended up being missing
from the symbol table due to the last reference to the alias being removed,
preventing HWASAN from symbolizing a global reference), but it could easily
have manifested as incorrect behaviour.
Since this is the third such issue encountered (previously: D65118, D65314)
it seems to be time to address this common error/QoI issue once and for all
and make the strip* family of functions not look through aliases.
Includes a test for the specific issue that I saw, but no doubt there are
other similar bugs fixed here.
As with D65118 this has been tested to make sure that the optimization isn't
load bearing. I built Clang, Chromium for Linux, Android and Windows as well
as the test-suite and there were no size regressions.
Differential Revision: https://reviews.llvm.org/D66606
llvm-svn: 369697
Summary:
Add a flag to the FunctionToLoopAdaptor that allows enabling MemorySSA only for the loop pass managers that are known to preserve it.
If an LPM is known to have only loop transforms that *all* preserve MemorySSA, then use MemorySSA if `EnableMSSALoopDependency` is set.
If an LPM has loop passes that do not preserve MemorySSA, then the flag passed is `false`, regardless of the value of `EnableMSSALoopDependency`.
When using a custom loop pass pipeline via `passes=...`, use keyword `loop` vs `loop-mssa` to use MemorySSA in that LPM. If a loop that does not preserve MemorySSA is added while using the `loop-mssa` keyword, that's an error.
Add the new `loop-mssa` keyword to a few tests where a difference occurs when enabling MemorySSA.
Reviewers: chandlerc
Subscribers: mehdi_amini, Prazek, george.burgess.iv, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66376
llvm-svn: 369548
Summary:
When inserting a new Def, and inserting Phis in the IDF when needed,
also mark the already existing Phis in the IDF as non-optimized, since
these may need fixing as well.
In the test attached, there is a Phi in the IDF that happens to be
trivial, and is wrongfully removed by the call to getLastDef that
follows. This is a valid situation and the existing IDF Phis need to
marked as "may need fixing" as well.
Resolves PR43044.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66495
llvm-svn: 369464
Summary:
CaptureTracker subclasses might have better dereferenceability
information which allows null pointer checks to be no-capturing.
The first user will be D59922.
Reviewers: sanjoy, hfinkel, aykevl, sstefan1, uenoku, xbolva00
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66371
llvm-svn: 369305
Summary:
Simplify the API using Optional<> and address comments in
https://reviews.llvm.org/D66165
Reviewers: vitalybuka
Subscribers: hiraditya, llvm-commits, ostannard, pcc
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66317
llvm-svn: 369300
Summary:
When inserting uses from outside the MemorySSA creation, we don't
normally need to rename uses, based on the assumption that there will be
no inserted Phis (if Def existed that required a Phi, that Phi already
exists). However, when dealing with unreachable blocks, MemorySSA will
optimize away Phis whose incoming blocks are unreachable, and these Phis end
up being re-added when inserting a Use.
There are two potential solutions here:
1. Analyze the inserted Phis and clean them up if they are unneeded
(current method for cleaning up trivial phis does not cover this)
2. Leave the Phi in place and rename uses, the same way as whe inserting
defs.
This patch use approach 2.
Resolves first test in PR42940.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66033
llvm-svn: 369291
Summary:
Before we required the comparison against null to be "canonical", hence
null to be operand #1. This patch allows null to be in either operand,
similar to the handling of loaded globals that follows.
Reviewers: sanjoy, hfinkel, aykevl, sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66321
llvm-svn: 369158
If they're left in the cache then they can't be removed efficiently when the
cache is notified to unlink a @llvm.assume call, and that can lead to values
from different functions entirely remaining there.
llvm-svn: 369091
Summary:
Currently we fail to compute known bits for recurrences where the
first incoming value is the start value of the recurrence.
Instead of exiting the loop when the first incoming value is not
the step of the recurrence, continue to check the second incoming
value.
The original code uses a loop to handle both cases, but incorrectly
exits instead of continuing.
Reviewers: lebedev.ri, spatel, nikic
Reviewed By: lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66216
llvm-svn: 369088
The verification I added has overly restrictive asserts.
Unreachable blocks can have any incoming value in practice, after an
update due to a "replaceAllUses" call when the repalced entry is
LiveOnEntry.
llvm-svn: 369050
For indirect call sites having a small set of possible callees,
!callees metadata can be used to indicate what those callees are.
This patch updates the call graph and lazy call graph analyses so
that they consider this metadata when encountering call sites. For
the call graph, it adds a new external call graph node to the graph
for each unique !callees metadata node. A call graph edge connects
an indirect call site with the external node associated with the
!callees metadata that is attached to it. And there is an edge from
this external node to each of the callees indicated by the metadata.
Similarly, for the lazy call graph, the patch adds Ref edges from a
caller to the possible callees indicated by the metadata.
The primary purpose of the patch is to facilitate iterating over the
functions in a module such that all of the callees indicated by a
given !callees metadata node will be visited prior to the functions
containing call sites annotated by that node. This property is
required by optimizations performing a bottom-up traversal of the
SCC DAG. For example, the inliner can be made to inline through an
indirect call. If the call site is annotated with !callees metadata,
this patch ensures that the inliner will have visited all of the
callees prior to the caller, allowing it to reliably compute the
cost of inlining one or more of the potential callees.
Original patch by @mssimpso. I've made some small changes to get it
to apply, build, and pass tests on the top of tree, as well as
some minor tweaks to formatting and functionality.
Subscribers: mehdi_amini, hiraditya, llvm-commits, mssimpso
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D39339
llvm-svn: 369025
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Some uses of getArgumentAliasingToReturnedPointer and
isIntrinsicReturningPointerAliasingArgumentWithoutCapturing require the
calls/intrinsics to preserve the nullness of the argument.
For alias analysis, the nullness property does not really come into
play.
This patch explicitly sets it to true. In D61669, the alias analysis
uses will be switched to not require preserving nullness.
Reviewers: nlopes, efriedma, hfinkel, sanjoy, aqjune, jdoerfert
Reviewed By: jdoerfert
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64150
llvm-svn: 368993
I'm planning on handling intrinsics that will benefit from checking
the address space enums. Don't bother moving the address collection
for now, since those won't need th enums.
llvm-svn: 368895
Use isGuaranteedToTransferExecutionToSuccessor() instead of
isSafeToSpeculativelyExecute() when seeing whether we can propagate
the information in an assume backwards in isValidAssumeForContext().
The latter is more general - it also allows arbitrary loads/stores -
and is also the condition we want: if our assume is guaranteed to
execute, its condition not holding would be UB.
Original patch by arielb1.
Differential Revision: https://reviews.llvm.org/D37215
llvm-svn: 368723
This pass is a port of the according pass from the HSAIL compiler.
It parses printf calls and setup runtime printf buffer.
After that it copies printf arguments to the buffer and fills in
module metadata for runtime.
Differential Revision: https://reviews.llvm.org/D24035
llvm-svn: 368592
Introducing non-global control for default block-scan-limit in MemDep analysis.
Useful when there are many compilations per initialized LLVM instance (e.g. JIT).
Reviewed By: asbirlea
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65806
llvm-svn: 368502
Summary: Implement a new analysis to estimate the number of cache lines
required by a loop nest.
The analysis is largely based on the following paper:
Compiler Optimizations for Improving Data Locality
By: Steve Carr, Katherine S. McKinley, Chau-Wen Tseng
http://www.cs.utexas.edu/users/mckinley/papers/asplos-1994.pdf
The analysis considers temporal reuse (accesses to the same memory
location) and spatial reuse (accesses to memory locations within a cache
line). For simplicity the analysis considers memory accesses in the
innermost loop in a loop nest, and thus determines the number of cache
lines used when the loop L in loop nest LN is placed in the innermost
position.
The result of the analysis can be used to drive several transformations.
As an example, loop interchange could use it determine which loops in a
perfect loop nest should be interchanged to maximize cache reuse.
Similarly, loop distribution could be enhanced to take into
consideration cache reuse between arrays when distributing a loop to
eliminate vectorization inhibiting dependencies.
The general approach taken to estimate the number of cache lines used by
the memory references in the inner loop of a loop nest is:
Partition memory references that exhibit temporal or spatial reuse into
reference groups.
For each loop L in the a loop nest LN: a. Compute the cost of the
reference group b. Compute the 'cache cost' of the loop nest by summing
up the reference groups costs
For further details of the algorithm please refer to the paper.
Authored By: etiotto
Reviewers: hfinkel, Meinersbur, jdoerfert, kbarton, bmahjour, anemet,
fhahn
Reviewed By: Meinersbur
Subscribers: reames, nemanjai, MaskRay, wuzish, Hahnfeld, xusx595,
venkataramanan.kumar.llvm, greened, dmgreen, steleman, fhahn, xblvaOO,
Whitney, mgorny, hiraditya, mgrang, jsji, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D63459
llvm-svn: 368439
The matchSelectPattern code can match patterns like (x >= 0) ? x : -x
for absolute value. But it can also match ((x-y) >= 0) ? (x-y) : (y-x).
If the latter form was matched we can only use the nsw flag if its
set on both subtracts.
This match makes sure we're looking at the former case only.
Differential Revision: https://reviews.llvm.org/D65692
llvm-svn: 368195
Without this patch computeConstantDifference returns None for cases like
these:
computeConstantDifference(%x, %x)
computeConstantDifference({%x,+,16}, {%x,+,16})
Differential Revision: https://reviews.llvm.org/D65474
llvm-svn: 368193
As discussed in PR42696:
https://bugs.llvm.org/show_bug.cgi?id=42696
...but won't help that case yet.
We have an odd situation where a select operand equivalence fold was
implemented in InstSimplify when it could have been done more generally
in InstCombine if we allow dropping of {nsw,nuw,exact} from a binop operand.
Here's an example:
https://rise4fun.com/Alive/Xplr
%cmp = icmp eq i32 %x, 2147483647
%add = add nsw i32 %x, 1
%sel = select i1 %cmp, i32 -2147483648, i32 %add
=>
%sel = add i32 %x, 1
I've left the InstSimplify code in place for now, but my guess is that we'd
prefer to remove that as a follow-up to save on code duplication and
compile-time.
Differential Revision: https://reviews.llvm.org/D65576
llvm-svn: 367695
Summary:
While there is always a `Value::replaceAllUsesWith()`,
sometimes the replacement needs to be conditional.
I have only cleaned a few cases where `replaceUsesWithIf()`
could be used, to both add test coverage,
and show that it is actually useful.
Reviewers: jdoerfert, spatel, RKSimon, craig.topper
Reviewed By: jdoerfert
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, aheejin, george.burgess.iv, asbirlea, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65528
llvm-svn: 367548
Summary:
Verify that the incoming defs into phis are the last defs from the
respective incoming blocks.
When moving blocks, insertDef must RenameUses. Adding this verification
makes GVNHoist tests fail that uncovered this issue.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63147
llvm-svn: 367451
Summary:
LoopRotate may simplify instructions, leading to the new instructions not having memory accesses created for them.
Allow this behavior, by allowing the new access to be null when the template is null, and looking upwards for the proper defined access when dealing with simplified instructions.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65338
llvm-svn: 367352
Summary:
In D37215, AssumeLikeInstruction are regarded as `willreturn`. In this patch, annotation is added to those which don't have `willreturn` now(`sideeffect, object_size, experimental_widenable_condition`).
Reviewers: jdoerfert, nikic, sstefan1
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65455
llvm-svn: 367342
LoopInfo can be easily preserved by passing it to the functions that
modify the CFG (SplitCriticalEdge and MergeBlockIntoPredecessor.
SplitCriticalEdge also preserves LoopSimplify and LCSSA form when when passing in
LoopInfo. The test case shows that we preserve LoopSimplify and
LoopInfo. Adding addPreservedID(LCSSAID) did not preserve LCSSA for some
reason.
Also I am not sure if it is possible to preserve those in the new pass
manager, as they aren't analysis passes.
Reviewers: reames, hfinkel, davide, jdoerfert
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D65137
llvm-svn: 367332
Summary: As clarified in D53184, volatile load and store do not trap. Therefore, we should remove volatile checks for instructions in `isGuaranteedToTransferExecutionToSuccessor`.
Reviewers: jdoerfert, efriedma, nikic
Reviewed By: nikic
Subscribers: hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65375
llvm-svn: 367226
Summary:
The existing isDivergent(Value) methods query whether a value is
divergent at its definition. However even if a value is uniform at its
definition, a use of it in another basic block can be divergent because
of divergent control flow between the def and the use.
This patch adds new isDivergent(Use) methods to DivergenceAnalysis,
LegacyDivergenceAnalysis and GPUDivergenceAnalysis.
This might allow D63953 or other similar workarounds to be removed.
Reviewers: alex-t, nhaehnle, arsenm, rtaylor, rampitec, simoll, jingyue
Reviewed By: nhaehnle
Subscribers: jfb, jvesely, wdng, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65141
llvm-svn: 367218
Summary:
This is the first patch for the loop guard. We introduced
getLoopGuardBranch() and isGuarded().
This currently only works on simplified loop, as it requires a preheader
and a latch to identify the guard.
It will work on loops of the form:
/// GuardBB:
/// br cond1, Preheader, ExitSucc <== GuardBranch
/// Preheader:
/// br Header
/// Header:
/// ...
/// br Latch
/// Latch:
/// br cond2, Header, ExitBlock
/// ExitBlock:
/// br ExitSucc
/// ExitSucc:
Prior discussions leading upto the decision to introduce the loop guard
API: http://lists.llvm.org/pipermail/llvm-dev/2019-May/132607.html
Reviewer: reames, kbarton, hfinkel, jdoerfert, Meinersbur, dmgreen
Reviewed By: reames
Subscribers: wuzish, hiraditya, jsji, llvm-commits, bmahjour, etiotto
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D63885
llvm-svn: 367033
Summary:
SimplifyFPBinOp is a variant of SimplifyBinOp that lets you specify
fast math flags, but the name is misleading because both functions
can simplify both FP and non-FP ops. Instead, overload SimplifyBinOp
so that you can optionally specify fast math flags.
Likewise for SimplifyFPUnOp.
Reviewers: spatel
Reviewed By: spatel
Subscribers: xbolva00, cameron.mcinally, eraman, hiraditya, haicheng, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64902
llvm-svn: 366902
It is not safe in general to replace an alias in a GEP with its aliasee
if the alias can be replaced with another definition (i.e. via strong/weak
resolution (linkonce_odr) or via symbol interposition (default visibility
in ELF)) while the aliasee cannot. An example of how this can go wrong is
in the included test case.
I was concerned that this might be a load-bearing misoptimization (it's
possible for us to use aliases to share vtables between base and derived
classes, and on Windows, vtable symbols will always be aliases in RTTI
mode, so this change could theoretically inhibit trivial devirtualization
in some cases), so I built Chromium for Linux and Windows with and without
this change. The file sizes of the resulting binaries were identical, so it
doesn't look like this is going to be a problem.
Differential Revision: https://reviews.llvm.org/D65118
llvm-svn: 366754
Summary:
- As the pointer stripping now tracks through `addrspacecast`, prepare
to handle the bit-width difference from the result pointer.
Reviewers: jdoerfert
Subscribers: jvesely, nhaehnle, hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64928
llvm-svn: 366470
Summary:
LoopInfoWrapperPass::verify uses DT, which means DT must be alive
even if it has no direct users.
Fixes a crash in expensive checks mode.
Reviewers: pcc, leonardchan
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64896
llvm-svn: 366388
Implement IR intrinsics for stack tagging. Generated code is very
unoptimized for now.
Two special intrinsics, llvm.aarch64.irg.sp and llvm.aarch64.tagp are
used to implement a tagged stack frame pointer in a virtual register.
Differential Revision: https://reviews.llvm.org/D64172
llvm-svn: 366360
Summary:
Since the target has no significant advantage of vectorization,
vector instructions bous threshold bonus should be optional.
amdgpu-inline-arg-alloca-cost parameter default value and the target
InliningThresholdMultiplier value tuned then respectively.
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, eraman, hiraditya, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64642
llvm-svn: 366348
Summary:
- As the pointer stripping could trace through `addrspacecast` now, need
to sext/trunc the offset to ensure it has the same width as the
pointer after stripping.
Reviewers: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64768
llvm-svn: 366162
Summary:
There is currently a correctness issue when unrolling loops containing
callbr's where their indirect targets are being updated correctly to the
newly created labels, but their operands are not. This manifests in
unrolled loops where the second and subsequent copies of callbr
instructions have blockaddresses of the label from the first instance of
the unrolled loop, which would result in nonsensical runtime control
flow.
For now, conservatively do not unroll the loop. In the future, I think
we can pursue unrolling such loops provided we transform the cloned
callbr's operands correctly.
Such a transform and its legalities are being discussed in:
https://reviews.llvm.org/D64101
Link: https://bugs.llvm.org/show_bug.cgi?id=42489
Link: https://groups.google.com/forum/#!topic/clang-built-linux/z-hRWP9KqPI
Reviewers: fhahn, hfinkel, efriedma
Reviewed By: fhahn, hfinkel, efriedma
Subscribers: efriedma, hiraditya, zzheng, dmgreen, llvm-commits, pirama, kees, nathanchance, E5ten, craig.topper, chandlerc, glider, void, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64368
llvm-svn: 366130
Summary: Vector of the same value with few undefs will sill be considered "Bytewise"
Reviewers: eugenis, pcc, jfb
Reviewed By: jfb
Subscribers: dexonsmith, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64031
llvm-svn: 365971
Summary:
This helps with more efficient use of memset for pattern initialization
From @pcc prototype for -ftrivial-auto-var-init=pattern optimizations
Binary size change on CTMark, (with -fuse-ld=lld -Wl,--icf=all, similar results with default linker options)
```
master patch diff
Os 8.238864e+05 8.238864e+05 0.0
O3 1.054797e+06 1.054797e+06 0.0
Os zero 8.292384e+05 8.292384e+05 0.0
O3 zero 1.062626e+06 1.062626e+06 0.0
Os pattern 8.579712e+05 8.338048e+05 -0.030299
O3 pattern 1.090502e+06 1.067574e+06 -0.020481
```
Zero vs Pattern on master
```
zero pattern diff
Os 8.292384e+05 8.579712e+05 0.036578
O3 1.062626e+06 1.090502e+06 0.025124
```
Zero vs Pattern with the patch
```
zero pattern diff
Os 8.292384e+05 8.338048e+05 0.003333
O3 1.062626e+06 1.067574e+06 0.003193
```
Reviewers: pcc, eugenis
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D63967
llvm-svn: 365858
The interface predates CallBase, so both it and implementation were
significantly more complicated than they needed to be. There was even
some redundancy that could be eliminated.
Should also help with OpaquePointers by not trying to derive a
function's type from it's PointerType.
llvm-svn: 365767
This patch replaces the three almost identical "strip & accumulate"
implementations for constant pointer offsets with a single one,
combining the respective functionalities. The old interfaces are kept
for now.
Differential Revision: https://reviews.llvm.org/D64468
llvm-svn: 365723
Summary:
We will need to handle IntToPtr which I will submit in a separate patch as it's
not going to be NFC.
Reviewers: eugenis, pcc
Reviewed By: eugenis
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D63940
llvm-svn: 365709
This makes the functions in Loads.h require a type to be specified
independently of the pointer Value so that when pointers have no structure
other than address-space, it can still do its job.
Most callers had an obvious memory operation handy to provide this type, but a
SROA and ArgumentPromotion were doing more complicated analysis. They get
updated to merge the properties of the various instructions they were
considering.
llvm-svn: 365468
Florian Hahn