When an AST file is built based on another AST file, it can use a decl from
the fist file, and therefore mark the "isUsed" bit. We need to note this in
the AST file so that the bit is set correctly when the second AST file is
loaded.
This patch introduces the distinction between setIsUsed() and markUsed() so
that we don't call into the ASTMutationListener callback when it wouldn't
be appropriate.
Fixes PR16635.
llvm-svn: 190016
Various tests had sprung up over the years which had --check-prefix=ABC on the
RUN line, but "CHECK-ABC:" later on. This happened to work before, but was
strictly incorrect. FileCheck is getting stricter soon though.
Patch by Ron Ofir.
llvm-svn: 188174
in one module but is only declared as a friend in another module, keep it
visible in the result of the merge.
This is incomplete on two axes:
1) Our handling of local extern declarations is basically broken (we put them
in the wrong decl context, and don't find them in redeclaration lookup, unless
they've previously been declared), and this results in them making friends
visible after a merge.
2) Eventually we'll need to mark that this has happened, and more carefully
check whether a declaration should be visible if it was only visible in some
of the modules in which it was declared. Fortunately it's rare for the
identifier namespace of a declaration to change along its redeclaration chain.
llvm-svn: 187639
sufficient to only consider names visible at the point of instantiation,
because that may not include names that were visible when the template was
defined. More generally, if the instantiation backtrace goes through a module
M, then every declaration visible within M should be available to the
instantiation. Any of those declarations might be part of the interface that M
intended to export to a template that it instantiates.
The fix here has two parts:
1) If we find a non-visible declaration during name lookup during template
instantiation, check whether the declaration was visible from the defining
module of all entities on the active template instantiation stack. The defining
module is not the owning module in all cases: we look at the module in which a
template was defined, not the module in which it was first instantiated.
2) Perform pending instantiations at the end of a module, not at the end of the
translation unit. This is general goodness, since it significantly cuts down
the amount of redundant work that is performed in every TU importing a module,
and also implicitly adds the module containing the point of instantiation to
the set of modules checked for declarations in a lookup within a template
instantiation.
There's a known issue here with template instantiations performed while
building a module, if additional imports are added later on. I'll fix that
in a subsequent commit.
llvm-svn: 187167
global allocation or deallocation function, that should not cause that global
allocation or deallocation function to become unavailable.
llvm-svn: 186270
numbers as we deserialize class template partial specializations. We can't
assume that the old sequence numbers will work.
The sequence numbers are still deterministic, but are now a lot less
predictable for class template partial specializations in modules/PCH.
llvm-svn: 184811
constructing a lookup table.
Previously, buildLookup would add lookup table entries for each item lexically
within the DC, and adding the first entry with a given name would trigger the
external source to add all its entries with that name. Then buildLookup would
carry on and re-add those entries all over again.
Instead, follow a simple rule: a declaration from an external source is only
ever made visible by the external source. One exception to this: since we don't
usually build a lookup table for the TU in C, and we never serialize one, we
don't expect the external source to provide lookups in the TU in C, so we build
those ones ourselves.
llvm-svn: 184696
As an optimization, we only kept declared methods with distinct
signatures in the global method pool, to keep the method lists
small. Under modules, however, one could have two different methods
with the same signature that occur in different (sub)modules. If only
the later submodule is important, message sends to 'id' with that
selector would fail because the first method (the only one that got
into the method pool) was hidden. When building a module, keep *all*
of the declared methods.
I did a quick check of both module build time and uses of modules, and
found no performance regression despite this causing us to keep more
methods in the global method pool. Fixes <rdar://problem/14148896>.
llvm-svn: 184504
Clang has an issue between mingw/include/float.h and clang/Headers/float.h with cyclic include_next.
For now, it should work to suppress #include_next in clang/float.h with an explicit target.
(It may work with -U__MINGW32__, though.)
llvm-svn: 181988
found for a receiver, note where receiver class
is declaraed (this is most common when receiver is a forward
class). // rdar://3258331
llvm-svn: 181847
After r180934 we may initiate module map parsing for modules not related to the module what we are building,
make sure we ignore the header file info of headers from such modules.
First part of rdar://13840148
llvm-svn: 181489
Summary:
Most of this change is wiring the pragma all the way through from the
lexer, parser, and sema to codegen. I considered adding a Decl AST node
for this, but it seemed too heavyweight.
Mach-O already uses a metadata flag called "Linker Options" to do this
kind of auto-linking. This change follows that pattern.
LLVM knows how to forward the "Linker Options" metadata into the COFF
.drectve section where these flags belong. ELF support is not
implemented, but possible.
This is related to auto-linking, which is http://llvm.org/PR13016.
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D723
llvm-svn: 181426
Previously, we would clone the current diagnostic consumer to produce
a new diagnostic consumer to use when building a module. The problem
here is that we end up losing diagnostics for important diagnostic
consumers, such as serialized diagnostics (where we'd end up with two
diagnostic consumers writing the same output file). With forwarding,
the diagnostics from all of the different modules being built get
forwarded to the one serialized-diagnostic consumer and are emitted in
a sane way.
Fixes <rdar://problem/13663996>.
llvm-svn: 181067
The "magical" builtin headers are the headers we provide as part of
the C standard library, which typically comes from /usr/include. We
essentially merge our headers into that location (due to cyclic
dependencies). This change makes sure that, when header search finds
one of our builtin headers, we figure out which module it actually
lives in. This case is fairly rare; one ends up having to include one
of the few built-in C headers we provide before including anything
from /usr/include to trigger it. Fixes <rdar://problem/13787184>.
llvm-svn: 180934
-Make sure that a deserialized external decl gets added to the TU scope.
-When associating an identifier with a set of decls, use the most recent local ones,
if they exist, otherwise associating decls from modules (that came after a local one)
will lead to an incomplete reconstructed re-declaration chain.
rdar://13712705
llvm-svn: 180634
Microsoft's Source Annotation Language (SAL) defines a bunch of keywords
for annotating the inputs and outputs of functions. Empty definitions
for the keywords are provided by <stdlib.h> -> <crtdefs.h> -> <sal.h>.
This makes it basically impossible to include MSVC's stdlib.h and
Clang's *mmintrin.h headers at the same time if they have variables
named __in. As a workaround, I've renamed those variables.
This fixes the Modules/compiler_builtins.m test which was XFAILed,
presumably due to this conflict.
llvm-svn: 179860
VerifyDiagnosticConsumer previously would not check that the diagnostic and
its matching directive referenced the same source file. Common practice was
to create directives that referenced other files but only by line number,
and this led to problems such as when the file containing the directive
didn't have enough lines to match the location of the diagnostic in the
other file, leading to bizarre file formatting and other oddities.
This patch causes VerifyDiagnosticConsumer to match source files as well as
line numbers. Therefore, a new syntax is made available for directives, for
example:
// expected-error@file:line {{diagnostic message}}
This extends the @line feature where "file" is the file where the diagnostic
is generated. The @line syntax is still available and uses the current file
for the diagnostic. "file" can be specified either as a relative or absolute
path - although the latter has less usefulness, I think! The #include search
paths will be used to locate the file and if it is not found an error will be
generated.
The new check is not optional: if the directive is in a different file to the
diagnostic, the file must be specified. Therefore, a number of test-cases
have been updated with regard to this.
This closes out PR15613.
llvm-svn: 179677
- There is no reason to have a modules specific flag for disabling
autolinking. Instead, convert the existing flag into -fno-autolink (which
should cover other autolinking code generation paths like #pragmas if and
when we support them).
llvm-svn: 179612
This is a Darwin-SDK-specific hash criteria used to identify a
particular SDK without having to hash the contents of all of its
headers. If other platforms have such versioned files, we should add
those checks here.
llvm-svn: 179346
Normal name lookup ignores any hidden declarations. When name lookup
for builtin declarations fails, we just synthesize a new
declaration at the point of use. With modules, this could lead to
multiple declarations of the same builtin, if one came from a (hidden)
submodule that was later made visible. Teach name lookup to always
find builtin names, so we don't create these redundant declarations in
the first place.
llvm-svn: 178711
Syntactically means the function macro parameter names do not need to use the same
identifiers in order for the definitions to be considered identical.
Syntactic equivalence is a microsoft extension for macro redefinitions and we'll also
use this kind of comparison to check for ambiguous macros coming from modules.
rdar://13562254
llvm-svn: 178671
This option can be useful for end users who want to know why they
ended up with a ton of different variants of the "std" module in their
module cache. This problem should go away over time, as we reduce the
need for module variants, but it will never go away entirely.
llvm-svn: 178148
Also update "test/Modules/macros.c" to test modified semantics:
-When there is an ambiguous macro, expand using the latest introduced version, not the first one.
-#undefs in submodules cause the macro to not be exported by that submodule, it doesn't cause
undefining of macros in the translation unit that imported that submodule.
This reduces macro namespace interference across modules.
llvm-svn: 178105
Clang's <stddef.h> provides definitions for the C standard library
types size_t, ptrdiff_t, and wchar_t. However, the system's C standard
library headers tend to provide the same typedefs, and the two
generally avoid each other using the macros
_SIZE_T/_PTRDIFF_T/_WCHAR_T. With modules, however, we need to see
*all* of the places where these types are defined, so provide the
typedefs (ignoring the macros) when modules are enabled.
llvm-svn: 177686
Eli Friedman