computeHostNumPhysicalCores() is designed to respect CPU affinity.
D84764 used sysconf(_SC_NPROCESSORS_ONLN) which does not respect
affinity.
SupportTests Threading.PhysicalConcurrency may fail if taskset -c is specified.
ThinLTO is run using a single thread on Linux on Power. The
compute_thread_count() routine calls getHostNumPhysicalCores which
returns -1 by default, and so `MaxThreadCount is set to 1.
unsigned llvm::ThreadPoolStrategy::compute_thread_count() const {
int MaxThreadCount = UseHyperThreads
? computeHostNumHardwareThreads()
: sys::getHostNumPhysicalCores();
if (MaxThreadCount <= 0)
MaxThreadCount = 1;
…
}
Fix: provide custom implementation of getHostNumPhysicalCores for
Linux on Power and Linux on Z.
Reviewed By: Kai, uweigand
Differential Revision: https://reviews.llvm.org/D84764
This change define RAII class `FileLocker` and methods `lock` and
`tryLockFor` of the class `raw_fd_stream` to facilitate using file locks.
Differential Revision: https://reviews.llvm.org/D79066
A list of target features is disabled when there is no hardware
floating-point support. This is the case when one of the following
options is passed to clang:
- -mfloat-abi=soft
- -mfpu=none
This option list is missing, however, the extension "+nofp" that can be
specified in -march flags, such as "-march=armv8-a+nofp".
This patch also disables unsupported target features when nofp is passed
to -march.
Differential Revision: https://reviews.llvm.org/D82948
Substitutions are already reported in the diagnostics appearing before
the input dump in the case of failed directives, and they're reported
in traces (produced by `-vv -dump-input=never`) in the case of
successful directives. However, those reports are not always
convenient to view while investigating the input dump, so this patch
adds the substitution report to the input dump too. For example:
```
$ cat check
CHECK: hello [[WHAT:[a-z]+]]
CHECK: [[VERB]] [[WHAT]]
$ FileCheck -vv -DVERB=goodbye check < input |& tail -8
<<<<<<
1: hello world
check:1 ^~~~~~~~~~~
2: goodbye word
check:2'0 X~~~~~~~~~~~ error: no match found
check:2'1 with "VERB" equal to "goodbye"
check:2'2 with "WHAT" equal to "world"
>>>>>>
```
Without this patch, the location reported for a substitution for a
directive match is the directive's full match range. This location is
misleading as it implies the substitution itself matches that range.
This patch changes the reported location to just the match range start
to suggest the substitution is known at the start of the match. (As
in the above example, input dumps don't mark any range for
substitutions. The location info in that case simply identifies the
right line for the annotation.)
Reviewed By: mehdi_amini, thopre
Differential Revision: https://reviews.llvm.org/D83650
The function setLastAccessAndModificationTime() uses function
futimens() or futimes() by default. Both functions are not
available in z/OS, therefore functionality is implemented using
__fchattr() on z/OS.
Reviews by: abhina.sreeskantharajan
Differential Revision: https://reviews.llvm.org/D83945
This is recommit of f51bc4fb60, reverted in 8577595e03, because
the function `flock` is not available on Solaris. In this variant
`flock` was replaced with `fcntl`, which is a POSIX function.
New functions `lockFile`, `tryLockFile` and `unlockFile` implement
simple file locking. They lock or unlock entire file. This must be
enough to support simulataneous writes to log files in parallel builds.
Differential Revision: https://reviews.llvm.org/D78896
The CMAKE_BUILD_TYPE is only meaningful to single-configuration
generators (such as make and Ninja). For multi-configuration generators
like Xcode and MSVC this variable won't be set, resulting in a CMake
error.
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
This reapplies commit d4020ef7c4, reverted in ac0edc5588 because it
broke build of LLDB. This commit contains appropriate changes for LLDB.
The original commit message is below.
Documentation on CreateProcessW states that maximal size of command line
is 32767 characters including ternimation null character. In the
function llvm::sys::commandLineFitsWithinSystemLimits this limit was set
to 32768. As a result if command line was exactly 32768 characters long,
a response file was not created and CreateProcessW was called with
too long command line.
Differential Revision: https://reviews.llvm.org/D83772
- Eliminate `From` which is 0 most of the times.
- Replace 'find_first_of('{') != 0' with 'front() != '{'
- Simplify the loop body given the it executes only when front() == '}'
Differential Revision: https://reviews.llvm.org/D84178
Documentation on CreateProcessW states that maximal size of command line
is 32767 characters including ternimation null character. In the
function llvm::sys::commandLineFitsWithinSystemLimits this limit was set
to 32768. As a result if command line was exactly 32768 characters long,
a response file was not created and CreateProcessW was called with
too long command line.
Differential Revision: https://reviews.llvm.org/D83772
Summary:
1. gcc uses `-march` and `-mtune` flag to chose arch and
pipeline model, but clang does not have `-mtune` flag,
we uses `-mcpu` to chose both infos.
2. Add SiFive e31 and u54 cpu which have default march
and pipeline model.
3. Specific `-mcpu` with rocket-rv[32|64] would select
pipeline model only, and use the driver's arch choosing
logic to get default arch.
Reviewers: lenary, asb, evandro, HsiangKai
Reviewed By: lenary, asb, evandro
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D71124
Fix incorrect use of the size of Path when accessing PathUTF16, as the
UTF-16 path can be shorter. Added unit test for coverage of this test
case.
Thanks to Ding Fei (danix800) for the code fix, see
https://reviews.llvm.org/D83321.
Differential Revision: https://reviews.llvm.org/D83689
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
For model 6 CPUs, we have a fallback detection method based on
available features. That mechanism should be enough to detect
these early family 6 CPUs as they only differ in the features
used by the detection anyway.
Rather than converting type/subtype into strings, just directly
select the string as part of family/model decoding. This avoids
the need for creating fake Type/SubTypes for CPUs not supported
by compiler-rtl. I've left the Type/SubType in place where it matches
compiler-rt so that the code can be diffed, but the Type/SubType
is no longer used by Host.cpp.
compiler-rt was already updated to select strings that aren't used
so the code will look similar.
This doesn't appear used for anything, and is emitted incorrectly
based on the description. This also depends on the IR type, and
pointee element type.
This patch upstreams support for the Arm-v8 Cortex-A78 and Cortex-X1
processors for AArch64 and ARM.
In detail:
- Adding cortex-a78 and cortex-x1 as cpu options for aarch64 and arm targets in clang
- Adding Cortex-A78 and Cortex-X1 CPU names and ProcessorModels in llvm
details of the CPU can be found here:
https://www.arm.com/products/cortex-xhttps://www.arm.com/products/silicon-ip-cpu/cortex-a/cortex-a78
The following people contributed to this patch:
- Luke Geeson
- Mikhail Maltsev
Reviewers: t.p.northover, dmgreen
Reviewed By: dmgreen
Subscribers: dmgreen, kristof.beyls, hiraditya, danielkiss, cfe-commits,
llvm-commits, miyuki
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D83206
This time without the change to make operator| use operator&=.
That seems to be the source of the gcc 5.3 miscompile.
Original commit message:
These represent the same thing but 64BIT only showed up from
getHostCPUFeatures providing a list of featuers to clang. While
EM64T showed up from getting the features for a named CPU.
EM64T didn't have a string specifically so it would not be passed
up to clang when getting features for a named CPU. While 64bit
needed a name since that's how it is index.
Merge them by filtering 64bit out before sending features to clang
for named CPUs.
It gets miscompiled with GCC 5.3, causing Clang to crash with
"error: unknown target CPU 'x86-64'"
See the llvm-commits thread for reproduction steps.
This reverts commit 51b0da731a.
Summary:
New line duplication logic introduced in https://reviews.llvm.org/D63482
has two issues: (1) there is no logic that removes duplicate newlines
when clang-apply-replacment reads YAML and (2) in general such logic
should be applied to all strings and should happen on string
serialization level instead in YAML parser.
This diff changes multiline strings quotation from single quote `'` to
double `"`. It solves problems with internal newlines because now they are
escaped. Also double quotation solves the problem with leading whitespace after
newline. In case of single quotation YAML parsers should remove leading
whitespace according to specification. In case of double quotation these
leading are internal space and they are preserved. There is no way to
instruct YAML parsers to preserve leading whitespaces after newline so
double quotation is the only viable option that solves all problems at
once.
Test Plan: check-all
Reviewers: gribozavr, mgehre, yvvan
Subscribers: xazax.hun, hiraditya, cfe-commits, llvm-commits
Tags: #clang-tools-extra, #clang, #llvm
Differential Revision: https://reviews.llvm.org/D80301
This seems to be leftover copied from an older implementation
of getHostCPUName where we needed this to check the name of
CPU vendor. We don't check the CPU vendor at all in
getHostCPUFeatures so this union and the variable are unneeded.
These represent the same thing but 64BIT only showed up from
getHostCPUFeatures providing a list of featuers to clang. While
EM64T showed up from getting the features for a named CPU.
EM64T didn't have a string specifically so it would not be passed
up to clang when getting features for a named CPU. While 64bit
needed a name since that's how it is index.
Merge them by filtering 64bit out before sending features to clang
for named CPUs.
These represent the same thing but 64BIT only showed up from
getHostCPUFeatures providing a list of featuers to clang. While
EM64T showed up from getting the features for a named CPU.
EM64T didn't have a string specifically so it would not be passed
up to clang when getting features for a named CPU. While 64bit
needed a name since that's how it is index.
Merge them by filtering 64bit out before sending features to clang
for named CPUs.
'64bit' shows up from -march=native on 64-bit capable CPUs.
'retpoline-eternal-thunk' isn't a real feature but shows up
when -mretpoline-external-thunk is passed to clang.
Previously we had to specify the forward and backwards feature dependencies separately which was error prone. And as dependencies have gotten more complex it was hard to be sure the transitive dependencies were handled correctly. The way it was written was also not super readable.
This patch replaces everything with a table that lists what features a feature is dependent on directly. Then we can recursively walk through the table to find the transitive dependencies. This is largely based on how we handle subtarget features in the MC layer from the tablegen descriptions.
Differential Revision: https://reviews.llvm.org/D83273
* The getLine and getColumn functions need to update the position, or
they will return stale data for buffered streams. This fixes a bug in
the clang -analyzer-checker-option-help option, which was not wrapping
the help text correctly when stdout is not a TTY.
* If the stream contains multi-byte UTF-8 sequences, then the whole
sequence needs to be considered to be a single character. This has the
edge case that the buffer might fill up and be flushed part way
through a character.
* If the stream contains East Asian wide characters, these will be
rendered twice as wide as other characters, so we need to increase the
column count to match.
This doesn't attempt to handle everything unicode can do (combining
characters, right-to-left markers, ...), but hopefully covers most
things likely to be common in messages and source code we might want to
print.
Differential revision: https://reviews.llvm.org/D76291
Adds implementation of getMainExecutable() and is_local_impl() to
Support/Unix/Path.inc. Both are needed to compile LLVM for z/OS.
Reviewed By: hubert.reinterpretcast, emaste
Differential Revision: https://reviews.llvm.org/D82544
Fangrui Song