Applied clang-tidy modernize-use-override over LLDB and added it to the LLDB .clang-tidy config.
Differential Revision: https://reviews.llvm.org/D123340
To allow us to select a different platform based on where the process is
running, plumb the process host architecture through platform selection.
This patch is in preparation for D121444 which needs this functionality
to tell apart iOS binaries running on Apple Silicon vs on a remote iOS
device.
Differential revision: https://reviews.llvm.org/D121484
Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.
After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.
This finishes the GetSupportedArchitectureAtIndex migration. There are
opportunities to simplify this even further, but I am going to leave
that to the platform owners.
Differential Revision: https://reviews.llvm.org/D116028
One of the backup schemes I use for finding kexts and kernels
on the local filesystem is to load a solitary binary when I don't
find any with a dSYM. This usually is a more confusing behavior
than helpful; people expect to get no binary loaded, or a binary
with debug information. This change stops loading kexts and
kernels that do not have an associated dSYM.
rdar://74291888
The various GetSharedModule methods have an optional out parameter for
the old module when a file has changed or been replaced, which the
Target uses to keep its module list current/correct. We've been using
a single ModuleSP to track "the" old module, and this change switches
to using a SmallVector of ModuleSP, which has a couple benefits:
- There are multiple codepaths which may discover an old module, and
this centralizes the code for how to handle multiples in one place,
in the Target code. With the single ModuleSP, each place that may
discover an old module is responsible for how it handles multiples,
and the current code is inconsistent (some code paths drop the first
old module, others drop the second).
- The API will be more natural for identifying old modules in routines
that work on sets, like ModuleList::ReplaceEquivalent (which I plan
on updating to report old module(s) in a subsequent change to fix a
bug).
I'm not convinced we can ever actually run into the case that multiple
old modules are found in the same GetOrCreateModule call, but I think
this change makes sense regardless, in light of the above.
When an old module is reported, Target::GetOrCreateModule calls
m_images.ReplaceModule, which doesn't allow multiple "old" modules; the
new code calls ReplaceModule for the first "old" module, and for any
subsequent old modules it logs the event and calls m_images.Remove.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D89156
lldb's PlatforDarwinKernel scans the local filesystem (well known
locations, plus user-specified directories) for kernels and kexts
when doing kernel debugging, and loads them automatically. Sometimes
kernel developers want to debug with *only* a dSYM, in which case they
give lldb the DWARF binary + the dSYM as a binary and symbol file.
This patch adds code to lldb to do this automatically if that's the
best thing lldb can find.
A few other bits of cleanup in PlatformDarwinKernel that I undertook
at the same time:
1. Remove the 'platform.plugin.darwin-kernel.search-locally-for-kexts'
setting. When I added the local filesystem index at start of kernel
debugging, I thought people might object to the cost of the search
and want a way to disable it. No one has.
2. Change the behavior of
'plugin.dynamic-loader.darwin-kernel.load-kexts' setting so it does
not disable the local filesystem scan, or use of the local filesystem
binaries.
3. PlatformDarwinKernel::GetSharedModule into GetSharedModuleKext and
GetSharedModuleKernel for easier readability & maintenance.
4. Added accounting of .dSYM.yaa files (an archive format akin to tar)
that I come across during the scan. I'm not using these for now; it
would be very expensive to expand the archives & see if the UUID matches
what I'm searching for.
<rdar://problem/69774993>
Differential Revision: https://reviews.llvm.org/D88632
GetDeveloperDirectory returns a const char* which is NULL when we cannot
find the developer directory. This crashes in
PlatformDarwinKernel::CollectKextAndKernelDirectories because we're
unconditionally assigning it to a std::string. Coincidentally I just
refactored a bunch of code in PlatformMacOSX so instead of a ad-hoc fix
I've reimplemented the method based on GetXcodeContentsDirectory.
The change is mostly NFC. Obviously it fixes the crash, but it also
removes support for finding the Xcode directory through he legacy
$XCODE_SELECT_PREFIX_DIR/usr/share/xcode-select/xcode_dir_path.
Differential revision: https://reviews.llvm.org/D76938
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
Summary:
This is a bit more explicit, and makes it possible to build LLDB without
varying the -I lines per-directory.
(The latter is useful because many build systems only allow this to be
configured per-library, and LLDB is insufficiently layered to be split into
multiple libraries on stricter build systems).
(My comment on D65185 has some more context)
Reviewers: JDevlieghere, labath, chandlerc, jdoerfert
Reviewed By: labath
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D65397
Patch by Sam McCall!
llvm-svn: 367241
Right now our Properties.inc only generates the initializer for the
options list but not the array declaration boilerplate around it. As the
array definition is identical for all arrays, we might as well also let
the Properties.inc generate it alongside the initializers.
Unfortunately we cannot do the same for enums, as there's this magic
ePropertyExperimental, which needs to come at the end to be interpreted
correctly. Hopefully we can get rid of this in the future and do the
same for the property enums.
Differential revision: https://reviews.llvm.org/D65353
llvm-svn: 367238
Property definitions are currently defined in a PropertyDefinition array
and have a corresponding enum to index in this array. Unfortunately this
is quite error prone. Indeed, just today we found an incorrect merge
where a discrepancy between the order of the enum values and their
definition caused the test suite to fail spectacularly.
Tablegen can streamline the process of generating the property
definition table while at the same time guaranteeing that the enums stay
in sync. That's exactly what this patch does. It adds a new tablegen
file for the properties, building on top of the infrastructure that
Raphael added recently for the command options. It also introduces two
new tablegen backends: one for the property definitions and one for
their corresponding enums.
It might be worth mentioning that I generated most of the tablegen
definitions from the existing property definitions, by adding a dump
method to the struct. This seems both more efficient and less error
prone that copying everything over by hand. Only Enum properties needed
manual fixup for the EnumValues and DefaultEnumValue fields.
Differential revision: https://reviews.llvm.org/D65185
llvm-svn: 367058
This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.
So instead of writing:
if (log)
log->Printf("%s\n", str);
You'd write:
LLDB_LOG(log, "%s\n", str);
This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.
find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +
Differential revision: https://reviews.llvm.org/D65128
llvm-svn: 366936
Before a Debugger gets a Target, target settings are routed to a global set
of settings. Even without this, some part of the LLDB which exist independently
of the Debugger object (the Module cache, the Symbol vendors, ...) access
directly the global default store for those settings.
Of course, if you modify one of those global settings while they are being read,
bad things happen. We see this quite a bit with FileSpecList settings. In
particular, we see many cases where one debug session changes
target.exec-search-paths while another session starts up and it crashes when
one of those accesses invalid FileSpecs.
This patch addresses the specific FileSpecList issue by adding locking to
OptionValueFileSpecList and never returning by reference.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D60468
llvm-svn: 359028
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
Unlike std::make_unique, which is only available since C++14,
std::make_shared is available since C++11. Not only is std::make_shared
a lot more readable compared to ::reset(new), it also performs a single
heap allocation for the object and control block.
Differential revision: https://reviews.llvm.org/D57990
llvm-svn: 353764
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Using compare is verbose, bug prone and potentially inefficient (because
of early termination). Replace relevant call sites with the (in)equality
operator.
llvm-svn: 349972
This patch simplifies boolean expressions acorss LLDB. It was generated
using clang-tidy with the following command:
run-clang-tidy.py -checks='-*,readability-simplify-boolean-expr' -format -fix $PWD
Differential revision: https://reviews.llvm.org/D55584
llvm-svn: 349215
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
Replace calls to LLVM's is_directory with calls to LLDB's FileSytem
class. For this I introduced a new convenience method that, like the
other methods, takes either a path or filespec. This still uses the LLVM
functions under the hood.
Differential revision: https://reviews.llvm.org/D54135
llvm-svn: 346375
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
This patch removes the Exists method from FileSpec and updates its uses
with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53845
llvm-svn: 345854
This patch moves the EnumerateDirectory functionality and related enum
and typedef from FileSpec to FileSystem.
This is part of a set of patches that extracts file system related
convenience methods from FileSpec. The long term goal is to remove this
method altogether and use the iterators directly, but for introducing
the VFS into LLDB this change is sufficient.
Differential revision: https://reviews.llvm.org/D53785
llvm-svn: 345800
LC_BUILD_VERSION load command handling - this
commit is a combination of patches by Adrian
Prantl and myself. llvm::Triple::BridgeOS
isn't defined yet, so all references to that
are currently commented out.
Also update Xcode project file to build the
NativePDB etc plugins.
<rdar://problem/43353615>
llvm-svn: 344209
passes to the recursive search function so we only recursively
search the kext bundle directory, instead of its parent directory.
<rdar://problem/41227170>
Differential Revision: https://reviews.llvm.org/D48302
llvm-svn: 335079
SetFile has an optional style argument which defaulted to the native
style. This patch makes that argument mandatory so clients of the
FileSpec class are forced to think about the correct syntax.
At the same time this introduces a (protected) convenience method to
update the file from within the FileSpec class that keeps the current
style.
These two changes together prevent a potential pitfall where the style
might be forgotten, leading to the path being updated and the style
unintentionally being changed to the host style.
llvm-svn: 334663
With the recent changes in FileSpec to use LLVM's path style, it is
possible to delegate a bunch of common path operations to LLVM's path
helpers. This means we only have to maintain a single implementation and
at the same time can benefit from the efforts made by the rest of the
LLVM community.
This is part one of a set of patches. There was no obvious way to split
this so I just worked from top to bottom.
Differential revision: https://reviews.llvm.org/D48084
llvm-svn: 334615
When loading kexts in PlatformDarwinKernel, we use the BundleID as the
filename to to create shared modules. In GetSharedModule we call
ExamineKextForMatchingUUID for any BundleID it finds that is a match, to
see if the UUID is also a match. Until now we were using
Host::ResolveExecutableInBundle which calls a CoreFoundation API to
obtain the executable. However, it's possible that the executable has a
variant suffix (e.g. foo_development) and these files were ignored.
This patch replaces that call with logic that looks for all the binaries
in the bundle. Because of the way ExamineKextForMatchingUUID works, it's
fine to try to load executables that are not valid and we can just
iterate over the list until we found a match.
Differential revision: https://reviews.llvm.org/D47539
llvm-svn: 334205
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
computer. When doing kernel debugging, lldb scrapes around a few
well-known locations to find kexts and kernels. It builds up two
lists - kexts and kernels with dSYM, and kexts and kernels without dSYMs.
After both lists have failed to provide a file, then we'll call out
to things like the DebugSymbols framework to find a kext/kernel.
This meant that when you had a kext/kernel on the local computer that
did not have debug information, lldb wouldn't consult DebugSymbols etc
once it'd locked on to one of these no-debug-info binaries on the local
computer.
Reorder this so we give DebugSymbols etc a shot at finding a debug-info
file before we use any of the no-debug-info binaries that were found on
the system.
<rdar://problem/34434440>
llvm-svn: 320241
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
This was originall reverted due to some test failures in
ModuleCache and TestCompDirSymlink. These issues have all
been resolved and the code now passes all tests.
Differential Revision: https://reviews.llvm.org/D30698
llvm-svn: 297300
this reverts r297116 because it breaks the unittests and
TestCompDirSymlink. The ModuleCache unit test is trivially fixable, but
the CompDirSymlink failure is a symptom of a deeper problem: llvm's stat
functionality is not a drop-in replacement for lldb's. The former is
based on stat(2) (which does symlink resolution), while the latter is
based on lstat(2) (which does not).
This also reverts subsequent build fixes (r297128, r297120, 297117) and
r297119 (Remove FileSpec dependency on FileSystem) which builds on top
of this.
llvm-svn: 297139
This deletes LLDB's FileType enumeration and replaces all
users, and all calls to functions that check whether a file
exists etc with corresponding calls to LLVM.
Differential Revision: https://reviews.llvm.org/D30624
llvm-svn: 297116
All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.
Differential Revision: https://reviews.llvm.org/D30559
llvm-svn: 296909
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
Shafik Yaghmour