C++98 and C++03 are effectively aliases as far as Clang is concerned.
As such, allowing both std=c++98 and std=c++03 as Lit parameters is
just slightly confusing, but provides no value. It's similar to allowing
both std=c++17 and std=c++1z, which we don't do.
This was discovered because we had an internal bot that ran the test
suite under both c++98 AND c++03 -- one of which is redundant.
Differential Revision: https://reviews.llvm.org/D80926
Tests that require support for Clang-verify are already marked as such
explicitly by their extension, which is .verify.cpp. Requiring the use
of an explicit Lit feature is, after thought, not really helpful.
This is a change in design: we have been bitten in the past by tests not
being enabled when we thought they were. However, the issue was mostly
with file extensions being ignored. The fix for that is not to blindly
require explicit features all the time, but instead to report all files
that are in the suite but that don't match any known test format. This
can be implemented in a follow-up patch.
By renaming .fail.cpp tests that don't need clang-verify to .compile.fail.cpp,
the new test format will not try to compile these tests with clang-verify,
and the old test format will work just the same. However, this allows
removing a workaround that requires parsing each test looking for
clang-verify markup.
After this change, a .fail.cpp test should always have clang-verify markup.
When clang-verify is not supported by the compiler, we will just check that
these tests fail to compile. When clang-verify is supported, these tests
will be compiled with clang-verify whether they have markup or not (so
they should have markup, or they will fail).
This simplifies the test suite and also ensures that all of our .fail.cpp
tests provide clang-verify markup. If it's impossible for a test to have
clang-verify markup, it can be moved to a .compile.fail.cpp test, which
are unconditionally just checked for compilation failure.
The libc++ test suite has a lot of old Lit features used to XFAIL tests
and mark them as UNSUPPORTED. Many of them are to workaround problems on
old compilers or old platforms. As time goes by, it is good to go and
clean those up to simplify the configuration of the test suite, and also
to reflect the testing reality. It's not useful to have markup that gives
the impression that e.g. clang-3.3 is supported, when we don't really
test on it anymore (and hence several new tests probably don't have the
necessary markup on them).
We had a workaround because GCC 5 does not evaluate static assertions
that are dependent on template parameters. This commit removes the
workaround and marks the corresponding tests as unsupported with GCC 5.
This has the benefit of bringing the new and the old test formats closer
without having to carry a workaround for an old compiler in the new
test format.
Forcing -Werror and other warnings means that the test suite isn't
actually testing what most people are seeing in their code -- it seems
better and less arbitrary to compile these tests as close as possible
to the compiler default instead.
Removing -Werror also means that we get to differentiate between
diagnostics that are errors and those that are warnings, which makes
the test suite more precise.
Differential Revision: https://reviews.llvm.org/D76311
Some tests do not fail at all when -verify is not supported, unless some
arbitrary warning flag is added to make them fail. We currently used
-Werror=unused-result to make them fail, but doing so makes the test
suite a lot more inscrutable. It seems better to just disable those
tests when -verify is not supported.
Differential Revision: https://reviews.llvm.org/D76256
[libcxx] [test] Calling min and max on an empty valarray is UB.
libcxx/test/std/numerics/numarray/template.valarray/valarray.members/min.pass.cpp
libcxx/test/std/numerics/numarray/template.valarray/valarray.members/max.pass.cpp
The calls `v1.min();` and `v1.max();` were emitting nodiscard warnings
with MSVC's STL. Upon closer inspection, these calls were triggering
undefined behavior. N4842 [valarray.members] says:
"T min() const;
8 Preconditions: size() > 0 is true.
T max() const;
10 Preconditions: size() > 0 is true."
As these tests already provide coverage for non-empty valarrays
(immediately above), I've simply deleted the code for empty valarrays.
[libcxx] [test] Add macros to msvc_stdlib_force_include.h (NFC).
libcxx/test/support/msvc_stdlib_force_include.h
These macros are being used by:
libcxx/test/std/utilities/meta/meta.trans/meta.trans.other/result_of11.pass.cpp
Defining them to nothing allows that test to pass.
[libcxx] [test] Silence MSVC warning C5063 for is_constant_evaluated (NFC).
libcxx/test/std/utilities/meta/meta.const.eval/is_constant_evaluated.pass.cpp
This test is intentionally writing code that MSVC intentionally warns
about, so the warning should be silenced.
Additionally, comment an endif for clarity.
[libcxx] [test] Silence MSVC warning C4127 (NFC).
libcxx/test/support/charconv_test_helpers.h
MSVC avoids emitting this warning when it sees a single constexpr value
being tested, but this condition is a mix of compile-time and run-time.
Using push-disable-pop is the least intrusive way to silence this.
[libcxx] [test] Silence MSVC truncation warning (NFC).
libcxx/test/std/containers/sequences/vector/vector.cons/construct_iter_iter.pass.cpp
This test is intentionally truncating float to int, which MSVC
intentionally warns about, so push-disable-pop is necessary.
[libcxx] [test] Avoid truncation warnings in erase_if tests (NFC).
libcxx/test/std/containers/associative/map/map.erasure/erase_if.pass.cpp
libcxx/test/std/containers/associative/multimap/multimap.erasure/erase_if.pass.cpp
libcxx/test/std/containers/unord/unord.map/erase_if.pass.cpp
libcxx/test/std/containers/unord/unord.multimap/erase_if.pass.cpp
These tests use maps with `short` keys and values, emitting MSVC
truncation warnings from `int`. Adding `static_cast` to `key_type`
and `mapped_type` avoids these warnings.
As these tests require C++20 mode (or newer), for brevity I've changed
the multimap tests to use emplace to initialize the test data.
This has no effect on the erase_if testing.
Some tests assume that iteration through an unordered multimap elements
will return them in the same order as at the container creation. This
assumption is not true since the container is unordered, so that no
specific order of elements is ever guaranteed for such container. This
patch is a continuation of D54838 and introduces checks verifying that
any iteration will return elements exactly from a set of valid values
and without repetition, but in no particular order.
Thanks to Andrey Maksimov for the patch.
Differential Revision: https://reviews.llvm.org/D56498
llvm-svn: 361414
Summary:
Freestanding is *weird*. The standard allows it to differ in a bunch of odd
manners from regular C++, and the committee would like to improve that
situation. I'd like to make libc++ behave better with what freestanding should
be, so that it can be a tool we use in improving the standard. To do that we
need to try stuff out, both with "freestanding the language mode" and
"freestanding the library subset".
Let's start with the super basic: run the libc++ tests in freestanding, using
clang as the compiler, and see what works. The easiest hack to do this:
In utils/libcxx/test/config.py add:
self.cxx.compile_flags += ['-ffreestanding']
Run the tests and they all fail.
Why? Because in freestanding `main` isn't special. This "not special" property
has two effects: main doesn't get mangled, and main isn't allowed to omit its
`return` statement. The first means main gets mangled and the linker can't
create a valid executable for us to test. The second means we spew out warnings
(ew) and the compiler doesn't insert the `return` we omitted, and main just
falls of the end and does whatever undefined behavior (if you're luck, ud2
leading to non-zero return code).
Let's start my work with the basics. This patch changes all libc++ tests to
declare `main` as `int main(int, char**` so it mangles consistently (enabling us
to declare another `extern "C"` main for freestanding which calls the mangled
one), and adds `return 0;` to all places where it was missing. This touches 6124
files, and I apologize.
The former was done with The Magic Of Sed.
The later was done with a (not quite correct but decent) clang tool:
https://gist.github.com/jfbastien/793819ff360baa845483dde81170feed
This works for most tests, though I did have to adjust a few places when e.g.
the test runs with `-x c`, macros are used for main (such as for the filesystem
tests), etc.
Once this is in we can create a freestanding bot which will prevent further
regressions. After that, we can start the real work of supporting C++
freestanding fairly well in libc++.
<rdar://problem/47754795>
Reviewers: ldionne, mclow.lists, EricWF
Subscribers: christof, jkorous, dexonsmith, arphaman, miyuki, libcxx-commits
Differential Revision: https://reviews.llvm.org/D57624
llvm-svn: 353086
to reflect the new license. These used slightly different spellings that
defeated my regular expressions.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351648
Some tests assume that iteration through an unordered multimap elements
will return them in the same order as at the container creation. This
assumption is not true since the container is unordered, so that no
specific order of elements is ever guaranteed for such container. This
patch introduces checks verifying that any iteration will return elements
exactly from a set of valid values and without repetition, but in no
particular order.
Reviewed as https://reviews.llvm.org/D54838.
Thanks to Andrey Maksimov for the patch.
llvm-svn: 349780
A bunch of unordered containers tests call library functions but don't directly
include the corresponding header files:
- fabs() (defined in <cmath> which is not included);
- is_permutation() (defined in <algorithm> which is not included);
- next() (defined in <iterator> which is not included).
- As a result, these tests won't compile against some conformant libraries.
Reviewed as https://reviews.llvm.org/D54643.
Thanks to Andrey Maksimov for the patch.
llvm-svn: 347085
This commit adds a merge member function to all the map and set containers,
which splices nodes from the source container. This completes support for
P0083r3.
Differential revision: https://reviews.llvm.org/D48896
llvm-svn: 345744
This commit adds a node handle type, (located in __node_handle), and adds
extract() and insert() members to all map and set types, as well as their
implementations in __tree and __hash_table.
The second half of this feature is adding merge() members, which splice nodes
in bulk from one container into another. This will be committed in a follow-up.
Differential revision: https://reviews.llvm.org/D46845
llvm-svn: 338472
Patch from Joe Loser.
Several unit tests meaning to test the behavior of lvalue insertion incorrectly
pass rvalues. Fixes bug PR # 27394
Reviewed as https://reviews.llvm.org/D44411
llvm-svn: 329541
Guard typedefs and static_asserts with _LIBCPP_VERSION.
test/std/containers/sequences/vector.bool/move_assign_noexcept.pass.cpp
test/std/containers/sequences/vector.bool/move_noexcept.pass.cpp
test/std/containers/sequences/vector.bool/swap_noexcept.pass.cpp
Additionally deal with conditional compilation.
test/std/containers/associative/map/map.cons/move_noexcept.pass.cpp
test/std/containers/associative/multimap/multimap.cons/move_noexcept.pass.cpp
Additionally deal with typedefs used by other typedefs.
Fixes D29135.
llvm-svn: 294154
These swap tests were swapping non-POCS non-equal allocators which
is undefined behavior. This patch changes the tests to use allocators
which compare equal. In order to test that the allocators were not
swapped I added an "id" field to test_allocator which does not
participate in equality but does propagate across copies/swaps.
This patch is based off of D26623 which was submitted by STL.
llvm-svn: 289358
Summary: The `max_size()` method of containers should respect both the allocator's reported `max_size` and the range of the `difference_type`. This patch makes all containers choose the smallest of those two values.
Reviewers: mclow.lists, EricWF
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D26885
llvm-svn: 287729
With a max_load_factor of 1.0, the only guarantee is that
bucket_count() >= size(). (Note: setting max_load_factor without
rehashing isn't supposed to affect this, because setting
max_load_factor is currently specified to be constant time.)
llvm-svn: 286982
This replaces every occurrence of _LIBCPP_STD_VER in the tests with
TEST_STD_VER. Additionally, for every affected
file, #include "test_macros.h" is being added explicitly if it wasn't
already there.
https://reviews.llvm.org/D26294
llvm-svn: 286007
Summary:
Libc++ still uses per-feature configuration macros when configuring for C++11. However libc++ requires a feature-complete C++11 compiler so there is no reason to check individual features. This patch starts the process of removing the feature specific macros and replacing their usage with `_LIBCPP_CXX03_LANG`.
This patch removes the __config macros:
* _LIBCPP_HAS_NO_TRAILING_RETURN
* _LIBCPP_HAS_NO_TEMPLATE_ALIASES
* _LIBCPP_HAS_NO_ADVANCED_SFINAE
* _LIBCPP_HAS_NO_DEFAULT_FUNCTION_TEMPLATE_ARGS
* _LIBCPP_HAS_NO_STATIC_ASSERT
As a drive I also changed our C++03 static_assert to use _Static_assert if available.
I plan to commit this without review if nobody voices an objection.
Reviewers: mclow.lists
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D24895
llvm-svn: 282347
Casey Carter