This patch renames some of the flag names of the clang/libomptarget map interface. The old names are slightly misleading, whereas the new ones describe in a better way what each flag is about.
Only the macros within the enumeration are renamed, there is no change in functionality therefore there are no updated regression tests.
Differential Revision: https://reviews.llvm.org/D39745
llvm-svn: 317598
If the thread id is requested in windows mode within funclets, we may
generate incorrect function call that could lead to broken codegen.
llvm-svn: 317208
This patch fixes various places in clang to propagate may-alias
TBAA access descriptors during construction of lvalues, thus
eliminating the need for the LValueBaseInfo::MayAlias flag.
This is part of D38126 reworked to be a separate patch to
simplify review.
Differential Revision: https://reviews.llvm.org/D39008
llvm-svn: 316988
In some cases the compiler can deduce the length of an array section
as constants. With this information, VLAs can be avoided in place of
a constant sized array or even a scalar value if the length is 1.
Example:
int a[4], b[2];
pragma omp parallel reduction(+: a[1:2], b[1:1])
{ }
For chained array sections, this optimization is restricted to cases
where all array sections except the last have a constant length 1.
This trivially guarantees that there are no holes in the memory region
that needs to be privatized.
Example:
int c[3][4];
pragma omp parallel reduction(+: c[1:1][1:2])
{ }
This relands commit r316229 that I reverted in r316235 because it
failed on some bots. During investigation I found that this was because
Clang and GCC evaluate the two arguments to emplace_back() in
ReductionCodeGen::emitSharedLValue() in a different order, hence
leading to a different order of generated instructions in the final
LLVM IR. Fix this by passing in the arguments from temporary variables
that are evaluated in a defined order.
Differential Revision: https://reviews.llvm.org/D39136
llvm-svn: 316362
In some cases the compiler can deduce the length of an array section
as constants. With this information, VLAs can be avoided in place of
a constant sized array or even a scalar value if the length is 1.
Example:
int a[4], b[2];
pragma omp parallel reduction(+: a[1:2], b[1:1])
{ }
For chained array sections, this optimization is restricted to cases
where all array sections except the last have a constant length 1.
This trivially guarantees that there are no holes in the memory region
that needs to be privatized.
Example:
int c[3][4];
pragma omp parallel reduction(+: c[1:1][1:2])
{ }
Differential Revision: https://reviews.llvm.org/D39136
llvm-svn: 316229
reduction.
If the reduction is an array or an array section and reduction operation
is declare reduction without initializer, it may lead to crash.
llvm-svn: 315611
in C.
If we try to get the lvalue for thread_id variables in inlined regions,
we did not use the correct version of function. Fixed this bug by adding
overrided version of the function getThreadIDVariableLValue for inlined
regions.
llvm-svn: 315578
This patch enables explicit generation of TBAA information in all
cases where LValue base info is propagated or constructed in
non-trivial ways. Eventually, we will consider each of these
cases to make sure the TBAA information is correct and not too
conservative. For now, we just fall back to generating TBAA info
from the access type.
This patch should not bring in any functional changes.
This is part of D38126 reworked to be a separate patch to
simplify review.
Differential Revision: https://reviews.llvm.org/D38733
llvm-svn: 315575
If both taskloop and task directives are used at the same time in one
program, we may ran into the situation when the particular type for task
directive is reused for taskloop directives. Patch fixes this problem.
llvm-svn: 315464
Besides obvious code simplification, avoiding explicit creation
of LValueBaseInfo objects makes it easier to make TBAA
information to be part of such objects.
This is part of D38126 reworked to be a separate patch to
simplify review.
Differential Revision: https://reviews.llvm.org/D38695
llvm-svn: 315289
Simplified and generalized codegen for non-offloading part that works if
offloading is failed or condition of the `if` clause is `false`.
llvm-svn: 314670
directives.
If the variable is used in the target-based region but is not found in
any private|mapping clause, then generate implicit firstprivate|map
clauses for these implicitly mapped variables.
llvm-svn: 314205
__kmpc_for_static_fini().
Added special flags for calls of __kmpc_for_static_fini(), like previous
ly for __kmpc_for_static_init(). Added flag OMP_IDENT_WORK_DISTRIBUTE
for distribute cnstruct, OMP_IDENT_WORK_SECTIONS for sections-based
constructs and OMP_IDENT_WORK_LOOP for loop-based constructs in
location flags.
llvm-svn: 312642
move constructor.
Previously user-defined reduction initializer was considered as an
assignment expression, not as initializer. Fixed this by treating the
initializer expression as an initializer.
llvm-svn: 312638
If exceptions are enabled, there may be a problem with the codegen of
the finalization functions from OpenMP runtime. It happens because of
the problem with the getting of thread identifier value. Patch tries to
fix it by using the result of the call of function
__kmpc_global_thread_num() rather than loading of value of outlined
function parameter.
llvm-svn: 311007
__kmpc_for_static_init().
OpenMP 5.0 will include OpenMP Tools interface that requires distinguishing different worksharing constructs.
Since the same entry point (__kmp_for_static_init(ident_t *loc,
kmp_int32 global_tid,........)) is called in case static
loop/sections/distribute it is suggested using 'flags' field of the
ident_t structure to pass the type of the construct.
llvm-svn: 310865
Arguments, passed to the outlined function, must have correct address
space info for proper Debug info support. Patch sets global address
space for arguments that are mapped and passed by reference.
Also, cuda-gdb does not handle reference types correctly, so reference
arguments are represented as pointers.
llvm-svn: 310387
If taskloop directive has no associated nogroup clause, it must emitted
inside implicit taskgroup block. Runtime supports it, but we need to
generate implicit taskgroup block explicitly to support future
reductions codegen.
llvm-svn: 307822
Currently, if the some of the parameters are captured by value, this
argument is converted to uintptr_t type and thus we loosing the debug
info about real type of the argument (captured variable):
```
void @.outlined_function.(uintptr %par);
...
%a = alloca i32
%a.casted = alloca uintptr
%cast = bitcast uintptr* %a.casted to i32*
%a.val = load i32, i32 *%a
store i32 %a.val, i32 *%cast
%a.casted.val = load uintptr, uintptr* %a.casted
call void @.outlined_function.(uintptr %a.casted.val)
...
```
To resolve this problem, in debug mode a speciall external wrapper
function is generated, that calls the outlined function with the correct
parameters types:
```
void @.wrapper.(uintptr %par) {
%a = alloca i32
%cast = bitcast i32* %a to uintptr*
store uintptr %par, uintptr *%cast
%a.val = load i32, i32* %a
call void @.outlined_function.(i32 %a)
ret void
}
void @.outlined_function.(i32 %par);
...
%a = alloca i32
%a.casted = alloca uintptr
%cast = bitcast uintptr* %a.casted to i32*
%a.val = load i32, i32 *%a
store i32 %a.val, i32 *%cast
%a.casted.val = load uintptr, uintptr* %a.casted
call void @.wrapper.(uintptr %a.casted.val)
...
```
llvm-svn: 306697
Summary:
If the first parameter of the function is the ImplicitParamDecl, codegen
automatically marks it as an implicit argument with `this` or `self`
pointer. Added internal kind of the ImplicitParamDecl to separate
'this', 'self', 'vtt' and other implicit parameters from other kind of
parameters.
Reviewers: rjmccall, aaron.ballman
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D33735
llvm-svn: 305075
Amongst other, this will help LTO to correctly handle/honor files
compiled with O0, helping debugging failures.
It also seems in line with how we handle other options, like how
-fnoinline adds the appropriate attribute as well.
Differential Revision: https://reviews.llvm.org/D28404
llvm-svn: 304127
The functions creating LValues propagated information about alignment
source. Extend the propagated data to also include information about
possible unrestricted aliasing. A new class LValueBaseInfo will
contain both AlignmentSource and MayAlias info.
This patch should not introduce any functional changes.
Differential Revision: https://reviews.llvm.org/D33284
llvm-svn: 303358
Use variadic templates instead of relying on <cstdarg> + sentinel.
This enforces better type checking and makes code more readable.
Differential revision: https://reviews.llvm.org/D32550
llvm-svn: 302572
[OpenMP] Initial implementation of code generation for pragma 'distribute parallel for' on host
https://reviews.llvm.org/D29508
This patch makes the following additions:
It abstracts away loop bound generation code from procedures associated with pragma 'for' and loops in general, in such a way that the same procedures can be used for 'distribute parallel for' without the need for a full re-implementation.
It implements code generation for 'distribute parallel for' and adds regression tests. It includes tests for clauses.
It is important to notice that most of the clauses are implemented as part of existing procedures. For instance, firstprivate is already implemented for 'distribute' and 'for' as separate pragmas. As the implementation of 'distribute parallel for' is based on the same procedures, then we automatically obtain implementation for such clauses without the need to add new code. However, this requires regression tests that verify correctness of produced code.
llvm-svn: 301340
https://reviews.llvm.org/D29508
This patch makes the following additions:
1. It abstracts away loop bound generation code from procedures associated with pragma 'for' and loops in general, in such a way that the same procedures can be used for 'distribute parallel for' without the need for a full re-implementation.
2. It implements code generation for 'distribute parallel for' and adds regression tests. It includes tests for clauses.
It is important to notice that most of the clauses are implemented as part of existing procedures. For instance, firstprivate is already implemented for 'distribute' and 'for' as separate pragmas. As the implementation of 'distribute parallel for' is based on the same procedures, then we automatically obtain implementation for such clauses without the need to add new code. However, this requires regression tests that verify correctness of produced code.
Looking forward to comments.
llvm-svn: 301223
With tasks, the cancel may happen in another task. This has a different
region info which means that we can't find it here.
Differential Revision: https://reviews.llvm.org/D30091
llvm-svn: 295474
This resolves a deadlock with the cancel directive when there is no explicit
cancellation point. In that case, the implicit barrier acts as cancellation
point. After removing the barrier after cancel, the now unmatched barrier for
the explicit cancellation point has to go as well.
This has probably worked before rL255992: With the calls for the explicit
barrier, it was sure that all threads passed a barrier before exiting.
Reported by Simon Convent and Joachim Protze!
Differential Revision: https://reviews.llvm.org/D30088
llvm-svn: 295473
This patch implements codegen for the reduction clause on
any parallel construct for elementary data types. An efficient
implementation requires hierarchical reduction within a
warp and a threadblock. It is complicated by the fact that
variables declared in the stack of a CUDA thread cannot be
shared with other threads.
The patch creates a struct to hold reduction variables and
a number of helper functions. The OpenMP runtime on the GPU
implements reduction algorithms that uses these helper
functions to perform reductions within a team. Variables are
shared between CUDA threads using shuffle intrinsics.
An implementation of reductions on the NVPTX device is
substantially different to that of CPUs. However, this patch
is written so that there are minimal changes to the rest of
OpenMP codegen.
The implemented design allows the compiler and runtime to be
decoupled, i.e., the runtime does not need to know of the
reduction operation(s), the type of the reduction variable(s),
or the number of reductions. The design also allows reuse of
host codegen, with appropriate specialization for the NVPTX
device.
While the patch does introduce a number of abstractions, the
expected use case calls for inlining of the GPU OpenMP runtime.
After inlining and optimizations in LLVM, these abstractions
are unwound and performance of OpenMP reductions is comparable
to CUDA-canonical code.
Patch by Tian Jin in collaboration with Arpith Jacob
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D29758
llvm-svn: 295333
This patch implements codegen for the reduction clause on
any parallel construct for elementary data types. An efficient
implementation requires hierarchical reduction within a
warp and a threadblock. It is complicated by the fact that
variables declared in the stack of a CUDA thread cannot be
shared with other threads.
The patch creates a struct to hold reduction variables and
a number of helper functions. The OpenMP runtime on the GPU
implements reduction algorithms that uses these helper
functions to perform reductions within a team. Variables are
shared between CUDA threads using shuffle intrinsics.
An implementation of reductions on the NVPTX device is
substantially different to that of CPUs. However, this patch
is written so that there are minimal changes to the rest of
OpenMP codegen.
The implemented design allows the compiler and runtime to be
decoupled, i.e., the runtime does not need to know of the
reduction operation(s), the type of the reduction variable(s),
or the number of reductions. The design also allows reuse of
host codegen, with appropriate specialization for the NVPTX
device.
While the patch does introduce a number of abstractions, the
expected use case calls for inlining of the GPU OpenMP runtime.
After inlining and optimizations in LLVM, these abstractions
are unwound and performance of OpenMP reductions is comparable
to CUDA-canonical code.
Patch by Tian Jin in collaboration with Arpith Jacob
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D29758
llvm-svn: 295319
This patch adds support for codegen of 'target teams' on the host.
This combined directive has two captured statements, one for the
'teams' region, and the other for the 'parallel'.
This target teams region is offloaded using the __tgt_target_teams()
call. The patch sets the number of teams as an argument to
this call.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D29084
llvm-svn: 293005
This patch adds support for codegen of 'target teams' on the host.
This combined directive has two captured statements, one for the
'teams' region, and the other for the 'parallel'.
This target teams region is offloaded using the __tgt_target_teams()
call. The patch sets the number of teams as an argument to
this call.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D29084
llvm-svn: 293001
The num_threads-clause on the combined directive applies to the
'parallel' region of this construct. We modify the NumThreadsClause
class to capture the clause expression within the 'target' region.
The offload runtime call for 'target parallel' is changed to
__tgt_target_teams() with 1 team and the number of threads set by
this clause or a default if none.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D29082
llvm-svn: 292997
This patch adds support for codegen of 'target parallel' on the host.
It is also the first combined directive that requires two or more
captured statements. Support for this functionality is included in
the patch.
A combined directive such as 'target parallel' has two captured
statements, one for the 'target' and the other for the 'parallel'
region. Two captured statements are required because each has
different implicit parameters (see SemaOpenMP.cpp). For example,
the 'parallel' has 'global_tid' and 'bound_tid' while the 'target'
does not. The patch adds support for handling multiple captured
statements based on the combined directive.
When codegen'ing the 'target parallel' directive, the 'target'
outlined function is created using the outer captured statement
and the 'parallel' outlined function is created using the inner
captured statement.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D28753
llvm-svn: 292419
This patch adds support for codegen of 'target parallel' on the host.
It is also the first combined directive that requires two or more
captured statements. Support for this functionality is included in
the patch.
A combined directive such as 'target parallel' has two captured
statements, one for the 'target' and the other for the 'parallel'
region. Two captured statements are required because each has
different implicit parameters (see SemaOpenMP.cpp). For example,
the 'parallel' has 'global_tid' and 'bound_tid' while the 'target'
does not. The patch adds support for handling multiple captured
statements based on the combined directive.
When codegen'ing the 'target parallel' directive, the 'target'
outlined function is created using the outer captured statement
and the 'parallel' outlined function is created using the inner
captured statement.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D28753
llvm-svn: 292374
This patch refactors code that calls codegen for target regions. Currently
the codebase only supports the 'target' directive. The patch pulls out
common target processing code into a static function that can be called
by codegen for any target directive.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D28752
llvm-svn: 292134
Summary:
This patch introduces support for the execution of parallel constructs in a target
region on the NVPTX device. Parallel regions must be in the lexical scope of the
target directive.
The master thread in the master warp signals parallel work for worker threads in worker
warps on encountering a parallel region.
Note: The patch does not yet support capture of arguments in a parallel region so
the test cases are simple.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D28145
llvm-svn: 291565
Summary:
This patch adds two fields to the offload entry descriptor. One field is meant to signal Ctors/Dtors and `link` global variables, and the other is reserved for runtime library use.
Currently, these fields are only filled with zeros in the current code generation, but that will change when `declare target` is added.
The reason, we are adding these fields now is to make the code generation consistent with the runtime library proposal under review in https://reviews.llvm.org/D14031.
Reviewers: ABataev, hfinkel, carlo.bertolli, kkwli0, arpith-jacob, Hahnfeld
Subscribers: cfe-commits, caomhin, jholewinski
Differential Revision: https://reviews.llvm.org/D28298
llvm-svn: 291124
-fno-inline-functions, -O0, and optnone.
These were really, really tangled together:
- We used the noinline LLVM attribute for -fno-inline
- But not for -fno-inline-functions (breaking LTO)
- But we did use it for -finline-hint-functions (yay, LTO is happy!)
- But we didn't for -O0 (LTO is sad yet again...)
- We had weird structuring of CodeGenOpts with both an inlining
enumeration and a boolean. They interacted in weird ways and
needlessly.
- A *lot* of set smashing went on with setting these, and then got worse
when we considered optnone and other inlining-effecting attributes.
- A bunch of inline affecting attributes were managed in a completely
different place from -fno-inline.
- Even with -fno-inline we failed to put the LLVM noinline attribute
onto many generated function definitions because they didn't show up
as AST-level functions.
- If you passed -O0 but -finline-functions we would run the normal
inliner pass in LLVM despite it being in the O0 pipeline, which really
doesn't make much sense.
- Lastly, we used things like '-fno-inline' to manipulate the pass
pipeline which forced the pass pipeline to be much more
parameterizable than it really needs to be. Instead we can *just* use
the optimization level to select a pipeline and control the rest via
attributes.
Sadly, this causes a bunch of churn in tests because we don't run the
optimizer in the tests and check the contents of attribute sets. It
would be awesome if attribute sets were a bit more FileCheck friendly,
but oh well.
I think this is a significant improvement and should remove the semantic
need to change what inliner pass we run in order to comply with the
requested inlining semantics by relying completely on attributes. It
also cleans up tho optnone and related handling a bit.
One unfortunate aspect of this is that for generating alwaysinline
routines like those in OpenMP we end up removing noinline and then
adding alwaysinline. I tried a bunch of other approaches, but because we
recompute function attributes from scratch and don't have a declaration
here I couldn't find anything substantially cleaner than this.
Differential Revision: https://reviews.llvm.org/D28053
llvm-svn: 290398
The change in D26502 splits ReaderWriter.h, which contains the APIs
into both the BitReader and BitWriter libraries, into BitcodeReader.h
and BitcodeWriter.h.
Change clang uses to the appropriate split header(s).
llvm-svn: 286567
It seems the compiler was getting confused by the in-class initializers
in local struct MapInfo, so moving those to a default constructor
instead.
llvm-svn: 277256
Summary: This patch adds support for the is_device_ptr clause. It expands SEMA to use the mappable expression logic that can only be tested with code generation in place and check conflicts with other data sharing related clauses using the mappable expressions infrastructure.
Reviewers: hfinkel, carlo.bertolli, arpith-jacob, kkwli0, ABataev
Subscribers: caomhin, cfe-commits
Differential Revision: https://reviews.llvm.org/D22788
llvm-svn: 276978
Summary: This patch adds support for the use_device_ptr clause. It includes changes in SEMA that could not be tested without codegen, namely, the use of the first private logic and mappable expressions support.
Reviewers: hfinkel, carlo.bertolli, arpith-jacob, kkwli0, ABataev
Subscribers: caomhin, cfe-commits
Differential Revision: https://reviews.llvm.org/D22691
llvm-svn: 276977
Summary: This patch add support to map pointers through references in class members. Although a reference does not have storage that a user can access, it still has to be mapped in order to get the deep copy right and the dereferencing code work properly.
Reviewers: hfinkel, carlo.bertolli, arpith-jacob, kkwli0, ABataev
Subscribers: caomhin, cfe-commits
Differential Revision: https://reviews.llvm.org/D22787
llvm-svn: 276934
Summary:
This patch fixes a bug in the map of array sections whose base is a reference to a pointer. The existing mapping support was not prepared to deal with it, causing the compiler to crash.
Mapping a reference to a pointer enjoys the same characteristics of a regular pointer, i.e., it is passed by value. Therefore, the reference has to be materialized in the target region.
Reviewers: hfinkel, carlo.bertolli, kkwli0, ABataev
Subscribers: caomhin, cfe-commits
Differential Revision: https://reviews.llvm.org/D22690
llvm-svn: 276933
Summary:
This patch fixes an issue detected when firstprivate variables are passed to an OpenMP outlined function vararg list. Currently they are not compatible with what the runtime library expects causing malfunction in some targets.
This patch fixes the issue by moving the casting logic already in place for offloading to the common code that creates the outline function and arguments and updates the regression tests accordingly.
Reviewers: hfinkel, arpith-jacob, carlo.bertolli, kkwli0, ABataev
Subscribers: cfe-commits, caomhin
Differential Revision: http://reviews.llvm.org/D21150
llvm-svn: 272900
'simd' modifier.
Runtime library defines new schedule constant kmp_sch_static_balanced_chunked = 45 for static loop-based directives static with chunk adjustment (e.g., simd). Added codegen for this kind of schedule.
llvm-svn: 271204
directives.
'kmp_task_t' record type added a new field for 'priority' clause and
changed the representation of pointer to destructors for privates used
within loop-based directives.
Old representation:
typedef struct kmp_task { /* GEH: Shouldn't this be
aligned somehow? */
void *shareds; /**< pointer to block of
pointers to shared vars */
kmp_routine_entry_t routine; /**< pointer to routine
to call for executing task */
kmp_int32 part_id; /**< part id for the
task */
kmp_routine_entry_t destructors; /* pointer to function to
invoke deconstructors of firstprivate C++ objects */
/* private vars */
} kmp_task_t;
New representation:
typedef struct kmp_task { /* GEH: Shouldn't this be
aligned somehow? */
void *shareds; /**< pointer to block of
pointers to shared vars */
kmp_routine_entry_t routine; /**< pointer to routine
to call for executing task */
kmp_int32 part_id; /**< part id for the
task */
kmp_cmplrdata_t data1; /* Two known
optional additions: destructors and priority */
kmp_cmplrdata_t data2; /* Process
destructors first, priority second */
/* future data */
/* private vars */
} kmp_task_t;
Also excessive initialization of 'destructors' fields to 'null' was
removed from codegen if it is known that no destructors shal be used.
Currently a special bit is used in 'kmp_tasking_flags_t' bitfields
('destructors_thunk' bitfield).
llvm-svn: 271201
Summary: This patch implements the code generation for the `target update` directive. The implemntation relies on the logic already in place for target data standalone directives, i.e. target enter/exit data.
Reviewers: hfinkel, carlo.bertolli, arpith-jacob, kkwli0, ABataev
Subscribers: caomhin, cfe-commits
Differential Revision: http://reviews.llvm.org/D20650
llvm-svn: 270886
Summary: If a variable is implicitly mapped (doesn't show in a map clause), the runtime library has to be informed if the corresponding capture shows up in first-private clause, so that the storage previously allocated in the device is used. This patch adds the support for that.
Reviewers: hfinkel, carlo.bertolli, arpith-jacob, kkwli0, ABataev
Subscribers: caomhin, cfe-commits
Differential Revision: http://reviews.llvm.org/D20112
llvm-svn: 270870
Summary: This patch changes the bits used to specify the map types according to the latest version of the libomptarget document and add the support for zero size array section when pointers are being implicitly mapped. This completes the missing new 4.5 map semantics.
Reviewers: hfinkel, carlo.bertolli, arpith-jacob, kkwli0, ABataev
Subscribers: caomhin, cfe-commits
Differential Revision: http://reviews.llvm.org/D20111
llvm-svn: 270868
For better performance and to unify code with offloading part we pass
scalar firstprivate values by value, instead of by reference. It will
remove some extra copying operations.
llvm-svn: 269751
directives.
OpenMP 4.5 supports clause 'priority' in task-based directives. Patch
adds initial codegen support for this clause in codegen.
llvm-svn: 269050
If private variables require destructors call at the deletion of the
task, additional flag in task flags must be set. Patch fixes this
problem.
llvm-svn: 269039
schedule modifiers.
Runtime library expects some additional data in schedule argument for
loop-based directives, that have additional schedule modifiers
'monotonic|nonmonotonic'.
llvm-svn: 269035
Summary: `getAssociatedStmt()` contains an assertion that assumes the statement always exists. In device code scanning, we need to look into the associated statement therefore we check its existence. This patch replaces `getAssociatedStmt` by `hasAssociatedStmt` so that we do not trigger the assertion for directives that happen not to have an associated statement (e.g target enter/exit data).
Reviewers: hfinkel, carlo.bertolli, arpith-jacob, kkwli0, ABataev
Subscribers: cfe-commits, caomhin
Differential Revision: http://reviews.llvm.org/D19812
llvm-svn: 268870
OpenMP 4.5 adds taskloop/taskloop simd directives. These directives
allow to use lastprivate clause. Patch adds codegen for this clause.
llvm-svn: 268618
http://reviews.llvm.org/D18474
This patch fixes a bug in code generation of the correct OpenMP runtime library call in presence of target and teams, when target is separated by teams with multiple curly brackets. The current implementation will not be able to see the teams directive inside target and issue a call to tgt_target instead of the correct one tgt_target_teams.
llvm-svn: 267972
directive.
OpenMP 4.5 defines 'taskloop' directive and 2 additional clauses
'grainsize' and 'num_tasks' for this directive. Patch adds codegen for
these clauses.
These clauses are generated as arguments of the '__kmpc_taskloop'
libcall and are encoded the following way:
void __kmpc_taskloop(ident_t *loc, int gtid, kmp_task_t *task, int if_val, kmp_uint64 *lb, kmp_uint64 *ub, kmp_int64 st, int nogroup, int sched, kmp_uint64 grainsize, void *task_dup);
If 'grainsize' is specified, 'sched' argument must be set to '1' and
'grainsize' argument must be set to the value of the 'grainsize' clause.
If 'num_tasks' is specified, 'sched' argument must be set to '2' and
'grainsize' argument must be set to the value of the 'num_tasks' clause.
It is possible because these 2 clauses are mutually exclusive and can't
be used at the same time on the same directive.
If none of these clauses is specified, 'sched' argument must be set to
'0'.
llvm-svn: 267862
Summary:
This patch adds support for the target exit data directive code generation.
Given that, apart from the employed runtime call, target exit data requires the same code generation pattern as target enter data, the OpenMP codegen entry point was renamed and reused for both.
Reviewers: hfinkel, carlo.bertolli, arpith-jacob, kkwli0, ABataev
Subscribers: cfe-commits, fraggamuffin, caomhin
Differential Revision: http://reviews.llvm.org/D17369
llvm-svn: 267814
Summary: This patch adds support for the target enter data directive code generation.
Reviewers: hfinkel, carlo.bertolli, arpith-jacob, kkwli0, ABataev
Subscribers: cfe-commits, fraggamuffin, caomhin
Differential Revision: http://reviews.llvm.org/D17368
llvm-svn: 267812
Summary:
This patch adds support for the target data directive code generation.
Part of the already existent functionality related with data maps is moved to a new function so that it could be reused.
Reviewers: hfinkel, carlo.bertolli, arpith-jacob, kkwli0, ABataev
Subscribers: cfe-commits, fraggamuffin, caomhin
Differential Revision: http://reviews.llvm.org/D17367
llvm-svn: 267811
Summary:
Implement codegen for the map clause. All the new list items in 4.5 specification are supported.
Fix bug in the generation of array sections that was exposed by some of the map clause tests: for pointer types the offsets have to be calculated from the pointee not the pointer.
Reviewers: hfinkel, kkwli0, carlo.bertolli, arpith-jacob, ABataev
Subscribers: ABataev, cfe-commits, caomhin, fraggamuffin
Differential Revision: http://reviews.llvm.org/D16749
llvm-svn: 267808
Currently there is a problem with codegen of inlined directives inside
lambdas, it may cause a crash during codegen because of incorrect
capturing of variables. Patch fixes this problem.
llvm-svn: 267677
The taskloop construct specifies that the iterations of one or more associated loops will be executed in parallel using OpenMP tasks. The iterations are distributed across tasks created by the construct and scheduled to be executed.
The next code will be generated for the taskloop directive:
#pragma omp taskloop num_tasks(N) lastprivate(j)
for( i=0; i<N*GRAIN*STRIDE-1; i+=STRIDE ) {
int th = omp_get_thread_num();
#pragma omp atomic
counter++;
#pragma omp atomic
th_counter[th]++;
j = i;
}
Generated code:
task = __kmpc_omp_task_alloc(NULL,gtid,1,sizeof(struct
task),sizeof(struct shar),&task_entry);
psh = task->shareds;
psh->pth_counter = &th_counter;
psh->pcounter = &counter;
psh->pj = &j;
task->lb = 0;
task->ub = N*GRAIN*STRIDE-2;
task->st = STRIDE;
__kmpc_taskloop(
NULL, // location
gtid, // gtid
task, // task structure
1, // if clause value
&task->lb, // lower bound
&task->ub, // upper bound
STRIDE, // loop increment
0, // 1 if nogroup specified
2, // schedule type: 0-none, 1-grainsize, 2-num_tasks
N, // schedule value (ignored for type 0)
(void*)&__task_dup_entry // tasks duplication routine
);
llvm-svn: 267395
LLVM really wants a debug location on every inlinable call in a function
with debug info, because it otherwise cannot set up inlining debug info.
This change applies an artificial line 0 debug location (which is how
DWARF marks automatically generated code that has no corresponding
source code) to the .__kmpc_global_dtor_. functions to avoid the
LLVM Verifier complaining.
llvm-svn: 267369
If the untied clause is present on a task construct, any thread in the
team can resume the task region after a suspension. Patch adds proper
codegen for untied tasks.
llvm-svn: 266853
If the untied clause is present on a task construct, any thread in the
team can resume the task region after a suspension. Patch adds proper
codegen for untied tasks.
llvm-svn: 266754
If the untied clause is present on a task construct, any thread in the team can resume the task region after a suspension. Patch adds proper codegen for untied tasks.
llvm-svn: 266722
Summary: See LLVM change D18775 for details, this change depends on it.
Reviewers: jyknight, reames
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D18776
llvm-svn: 265569
This patch implements the teams directive for the NVPTX backend. It is different from the host code generation path as it:
Does not call kmpc_fork_teams. All necessary teams and threads are started upon touching the target region, when launching a CUDA kernel, and their execution is coordinated through sequential and parallel regions within the target region.
Does not call kmpc_push_num_teams even if a num_teams of thread_limit clause is present. Setting the number of teams and the thread limit is implemented by the nvptx-related runtime.
Please note that I am now passing a Clang Expr * to emitPushNumTeams instead of the originally chosen llvm::Value * type. The reason for that is that I want to avoid emitting expressions for num_teams and thread_limit if they are not needed in the target region.
http://reviews.llvm.org/D17963
llvm-svn: 265304
Solution unifies interface of RegionCodeGenTy type to allow insert
runtime-specific code before/after main codegen action defined in
CGStmtOpenMP.cpp file. Runtime should not define its own RegionCodeGenTy
for general OpenMP directives, but must be allowed to insert its own
(required) code to support target specific codegen.
llvm-svn: 264700
Solution unifies interface of RegionCodeGenTy type to allow insert
runtime-specific code before/after main codegen action defined in
CGStmtOpenMP.cpp file. Runtime should not define its own RegionCodeGenTy
for general OpenMP directives, but must be allowed to insert its own
(required) code to support target specific codegen.
llvm-svn: 264576
Solution unifies interface of RegionCodeGenTy type to allow insert
runtime-specific code before/after main codegen action defined in
CGStmtOpenMP.cpp file. Runtime should not define its own RegionCodeGenTy
for general OpenMP directives, but must be allowed to insert its own
(required) code to support target specific codegen.
llvm-svn: 264569
Summary:
This patch adds base support for codegen of the target directive on the NVPTX device.
Reviewers: ABataev
Differential Revision: http://reviews.llvm.org/D17877
Reworked test case after buildbot failure on windows.
Updated patch to integrate r263837 and test case nvptx_target_firstprivate_codegen.cpp.
llvm-svn: 264018
This patch implements the following aspects:
It extends sema to check that a variable is not reference in both a map clause and firstprivate or private. This is needed to ensure correct functioning at codegen level, apart from being useful for the user.
It implements firstprivate for target in codegen. The implementation applies to both host and nvptx devices.
It adds regression tests for codegen of firstprivate, host and device side when using the host as device, and nvptx side.
Please note that the regression test for nvptx codegen is missing VLAs. This is because VLAs currently require saving and restoring the stack which appears not to be a supported operation by nvptx backend.
It adds a check in sema regression tests for target map, firstprivate, and private clauses.
http://reviews.llvm.org/D18203
llvm-svn: 263837
Summary:
Reworked test case after buildbot failure on windows.
This patch adds base support for codegen of the target directive on the NVPTX device.
Reviewers: ABataev
Differential Revision: http://reviews.llvm.org/D17877
llvm-svn: 263783
OpenMP 4.0 allows to define custom reduction operations using '#pragma
omp declare reduction' construct. Patch allows to use this custom
defined reduction operations in 'reduction' clauses.
llvm-svn: 263701
This patch adds support for codegen of private clause of target and a regression test for host code generation, when the host is used as target device. I believe that code generation for nvptx backend would not require anything additional or different to what is done for the host.
http://reviews.llvm.org/D18105
llvm-svn: 263654
Summary:
This patch adds base support for codegen of the target directive on the NVPTX device.
Reviewers: ABataev
Differential Revision: http://reviews.llvm.org/D17877
llvm-svn: 263587
Summary:
This patch adds base support for codegen of the target directive on the NVPTX device.
Reviewers: ABataev
Differential Revision: http://reviews.llvm.org/D17877
llvm-svn: 263552
This patch provide basic implementation of codegen for teams directive, excluding all clauses except dist_schedule. It also fixes parts of AST reader/writer to enable correct pre-compiled header handling.
http://reviews.llvm.org/D17170
llvm-svn: 262832
This patch provide basic implementation of codegen for teams directive, excluding all clauses except dist_schedule. It also fixes parts of AST reader/writer to enable correct pre-compiled header handling.
http://reviews.llvm.org/D17170
llvm-svn: 262741
Summary:
This patch implements the launching of a target region in the presence of a nested teams region, i.e calls tgt_target_teams with the required arguments gathered from the enclosed teams directive.
The actual codegen of the region enclosed by the teams construct will be contributed in a separate patch.
Reviewers: hfinkel, arpith-jacob, kkwli0, carlo.bertolli, ABataev
Subscribers: cfe-commits, caomhin, fraggamuffin
Differential Revision: http://reviews.llvm.org/D17019
llvm-svn: 262625
Summary:
Unlike other outlined regions in OpenMP, offloading entry points have to have be visible (external linkage) for the device side. Using dots in the names of the entries can be therefore problematic for some toolchains, e.g. NVPTX.
Also the patch drops the column information in the unique name of the entry points. The parsing of directives ignore unknown tokens, preventing several target regions to be implemented in the same line. Therefore, the line information is sufficient for the name to be unique. Also, the preprocessor printer does not preserve the column information, causing offloading-entry detection issues if the host uses an integrated preprocessor and the target doesn't (or vice versa).
Reviewers: hfinkel, arpith-jacob, carlo.bertolli, kkwli0, ABataev
Subscribers: cfe-commits, fraggamuffin, caomhin
Differential Revision: http://reviews.llvm.org/D17179
llvm-svn: 260837
Codegen for array sections/array subscripts worked only for expressions with arrays as base. Patch fixes codegen for bases with pointer/reference types.
llvm-svn: 259776
If 'sections' directive has only one sub-section, the code for 'single'-based directive was emitted. Removed this codegen, because it causes crashes in different cases.
llvm-svn: 258495
This patch attempts to fix the regressions identified when the patch was committed initially.
Thanks to Michael Liao for identifying the fix in the offloading metadata generation
related with side effects in evaluation of function arguments.
llvm-svn: 256933
Summary:
In order to offloading work properly two things need to be in place:
- a descriptor with all the offloading information (device entry functions, and global variable) has to be created by the host and registered in the OpenMP offloading runtime library.
- all the device functions need to be emitted for the device and a convention has to be in place so that the runtime library can easily map the host ID of an entry point with the actual function in the device.
This patch adds support for these two things. However, only entry functions are being registered given that 'declare target' directive is not yet implemented.
About offloading descriptor:
The details of the descriptor are explained with more detail in http://goo.gl/L1rnKJ. Basically the descriptor will have fields that specify the number of devices, the pointers to where the device images begin and end (that will be defined by the linker), and also pointers to a the begin and end of table whose entries contain information about a specific entry point. Each entry has the type:
```
struct __tgt_offload_entry{
void *addr;
char *name;
int64_t size;
};
```
and will be implemented in a pre determined (ELF) section `.omp_offloading.entries` with 1-byte alignment, so that when all the objects are linked, the table is in that section with no padding in between entries (will be like a C array). The code generation ensures that all `__tgt_offload_entry` entries are emitted in the same order for both host and device so that the runtime can have the corresponding entries in both host and device in same index of the table, and efficiently implement the mapping.
The resulting descriptor is registered/unregistered with the runtime library using the calls `__tgt_register_lib` and `__tgt_unregister_lib`. The registration is implemented in a high priority global initializer so that the registration happens always before any initializer (that can potentially include target regions) is run.
The driver flag -omptargets= was created to specify a comma separated list of devices the user wants to support so that the new functionality can be exercised. Each device is specified with its triple.
About target codegen:
The target codegen is pretty much straightforward as it reuses completely the logic of the host version for the same target region. The tricky part is to identify the meaningful target regions in the device side. Unlike other programming models, like CUDA, there are no already outlined functions with attributes that mark what should be emitted or not. So, the information on what to emit is passed in the form of metadata in host bc file. This requires a new option to pass the host bc to the device frontend. Then everything is similar to what happens in CUDA: the global declarations emission is intercepted to check to see if it is an "interesting" declaration. The difference is that instead of checking an attribute, the metadata information in checked. Right now, there is only a form of metadata to pass information about the device entry points (target regions). A class `OffloadEntriesInfoManagerTy` was created to manage all the information and queries related with the metadata. The metadata looks like this:
```
!omp_offload.info = !{!0, !1, !2, !3, !4, !5, !6}
!0 = !{i32 0, i32 52, i32 77426347, !"_ZN2S12r1Ei", i32 479, i32 13, i32 4}
!1 = !{i32 0, i32 52, i32 77426347, !"_ZL7fstatici", i32 461, i32 11, i32 5}
!2 = !{i32 0, i32 52, i32 77426347, !"_Z9ftemplateIiET_i", i32 444, i32 11, i32 6}
!3 = !{i32 0, i32 52, i32 77426347, !"_Z3fooi", i32 99, i32 11, i32 0}
!4 = !{i32 0, i32 52, i32 77426347, !"_Z3fooi", i32 272, i32 11, i32 3}
!5 = !{i32 0, i32 52, i32 77426347, !"_Z3fooi", i32 127, i32 11, i32 1}
!6 = !{i32 0, i32 52, i32 77426347, !"_Z3fooi", i32 159, i32 11, i32 2}
```
The fields in each metadata entry are (in sequence):
Entry 1) an ID of the type of metadata - right now only zero is used meaning "OpenMP target region".
Entry 2) a unique ID of the device where the input source file that contain the target region lives.
Entry 3) a unique ID of the file where the input source file that contain the target region lives.
Entry 4) a mangled name of the function that encloses the target region.
Entries 5) and 6) line and column number where the target region was found.
Entry 7) is the order the entry was emitted.
Entry 2) and 3) are required to distinguish files that have the same function name.
Entry 4) is required to distinguish different instances of the same declaration (usually templated ones)
Entries 5) and 6) are required to distinguish the particular target region in body of the function (it is possible that a given target region is not an entry point - if clause can evaluate always to zero - and therefore we need to identify the "interesting" target regions. )
This patch replaces http://reviews.llvm.org/D12306.
Reviewers: ABataev, hfinkel, tra, rjmccall, sfantao
Subscribers: FBrygidyn, piotr.rak, Hahnfeld, cfe-commits
Differential Revision: http://reviews.llvm.org/D12614
llvm-svn: 256842
OpenMP 4.5 adds 'depend(sink:vec)' in 'ordered' directive for doacross loop synchronization. Patch adds parsing and semantic analysis for this clause.
llvm-svn: 256330
OpenMP 4.5 adds 'depend(sink:vec)' in 'ordered' directive for doacross loop synchronization. Patch adds parsing and semantic analysis for this clause.
llvm-svn: 256238
OpenMP codegen tried to emit the code for its constructs even if it was detected as a dead-code. Added checks to ensure that the code is emitted if the code is not dead.
llvm-svn: 255990
OpenMP 4.5 adds 'depend(source)' clause for 'ordered' directive to support cross-iteration dependence. Patch adds parsing and semantic analysis for this construct.
llvm-svn: 255986
Summary:
This patch implements the 4.5 specification for the implicit data maps. OpenMP 4.5 specification changes the default way data is captured into a target region. All the non-aggregate kinds are passed by value by default. This required activating the capturing by value during SEMA for the target region. All the non-aggregate values that can be encoded in the size of a pointer are properly casted and forwarded to the runtime library. On top of fixing the previous weird behavior for mapping pointers in nested data regions (an explicit map was always required), this also improves performance as the number of allocations/transactions to the device per non-aggregate map are reduced from two to only one - instead of passing a reference and the value, only the value passed.
Explicit maps will be added later on once firstprivate, private, and map clauses' SEMA and parsing are available.
Reviewers: hfinkel, rjmccall, ABataev
Subscribers: cfe-commits, carlo.bertolli
Differential Revision: http://reviews.llvm.org/D14940
llvm-svn: 254521
Runtime library requires, that codegen for 'depend' clause for 'out' dependency kind must be the same as codegen for 'depend' clause with 'inout' dependency.
llvm-svn: 253866
attributes to internal functions.
This patch fixes CodeGenModule::CreateGlobalInitOrDestructFunction to
use SetInternalFunctionAttributes instead of SetLLVMFunctionAttributes
to attach function attributes to internal functions.
Also, make sure the correct CGFunctionInfo is passed instead of always
passing what arrangeNullaryFunction returns.
rdar://problem/20828324
Differential Revision: http://reviews.llvm.org/D13610
llvm-svn: 251734
functions.
This commit fixes a bug in CGOpenMPRuntime.cpp and CGObjC.cpp where
some of the function attributes are not attached to newly created
functions.
rdar://problem/20828324
Differential Revision: http://reviews.llvm.org/D13928
llvm-svn: 251476
This patch implements the outlining for offloading functions for code
annotated with the OpenMP target directive. It uses a temporary naming
of the outlined functions that will have to be updated later on once
target side codegen and registration of offloading libraries is
implemented - the naming needs to be made unique in the produced
library.
llvm-svn: 249148
Description.
If the simd clause is specified, the ordered regions encountered by any thread will use only a single SIMD lane to execute the ordered regions in the order of the loop iterations.
Restrictions.
An ordered construct with the simd clause is the only OpenMP construct that can appear in the simd region.
An ordered directive with ‘simd’ clause is generated as an outlined function and corresponding function call to prevent this part of code from vectorization later in backend.
llvm-svn: 248772
Patch improves codegen for OpenMP constructs. If the OpenMP region does not have internal 'cancel' construct, a call to 'void __kmpc_barrier()' runtime function is generated for all implicit/explicit barriers. If the region has inner 'cancel' directive, then
```
if (__kmpc_cancel_barrier())
exit from outer construct;
```
code is generated.
Also, the code for 'canellation point' directive is not generated if parent directive does not have 'cancel' directive.
llvm-svn: 247681
Current implementation may end up emitting an undefined reference for
an "inline __attribute__((always_inline))" function by generating an
"available_externally alwaysinline" IR function for it and then failing to
inline all the calls. This happens when a call to such function is in dead
code. As the inliner is an SCC pass, it does not process dead code.
Libc++ relies on the compiler never emitting such undefined reference.
With this patch, we emit a pair of
1. internal alwaysinline definition (called F.alwaysinline)
2a. A stub F() { musttail call F.alwaysinline }
-- or, depending on the linkage --
2b. A declaration of F.
The frontend ensures that F.inlinefunction is only used for direct
calls, and the stub is used for everything else (taking the address of
the function, really). Declaration (2b) is emitted in the case when
"inline" is meant for inlining only (like __gnu_inline__ and some
other cases).
This approach, among other nice properties, ensures that alwaysinline
functions are always internal, making it impossible for a direct call
to such function to produce an undefined symbol reference.
This patch is based on ideas by Chandler Carruth and Richard Smith.
llvm-svn: 247494
Current implementation may end up emitting an undefined reference for
an "inline __attribute__((always_inline))" function by generating an
"available_externally alwaysinline" IR function for it and then failing to
inline all the calls. This happens when a call to such function is in dead
code. As the inliner is an SCC pass, it does not process dead code.
Libc++ relies on the compiler never emitting such undefined reference.
With this patch, we emit a pair of
1. internal alwaysinline definition (called F.alwaysinline)
2a. A stub F() { musttail call F.alwaysinline }
-- or, depending on the linkage --
2b. A declaration of F.
The frontend ensures that F.inlinefunction is only used for direct
calls, and the stub is used for everything else (taking the address of
the function, really). Declaration (2b) is emitted in the case when
"inline" is meant for inlining only (like __gnu_inline__ and some
other cases).
This approach, among other nice properties, ensures that alwaysinline
functions are always internal, making it impossible for a direct call
to such function to produce an undefined symbol reference.
This patch is based on ideas by Chandler Carruth and Richard Smith.
llvm-svn: 247465
Currently all variables used in OpenMP regions are captured into a record and passed to outlined functions in this record. It may result in some poor performance because of too complex analysis later in optimization passes. Patch makes to emit outlined functions for parallel-based regions with a list of captured variables. It reduces code for 2*n GEPs, stores and loads at least.
Codegen for task-based regions remains unchanged because runtime requires that all captured variables are passed in captured record.
llvm-svn: 247251
Seems it broke the Polly build.
From http://lab.llvm.org:8011/builders/perf-x86_64-penryn-O3-polly-fast/builds/11687/steps/compile/logs/stdio:
In file included from /home/grosser/buildslave/perf-x86_64-penryn-O3-polly-fast/llvm.src/lib/TableGen/Record.cpp:14:0:
/home/grosser/buildslave/perf-x86_64-penryn-O3-polly-fast/llvm.src/include/llvm/TableGen/Record.h:369:3: error: looser throw specifier for 'virtual llvm::TypedInit::~TypedInit()'
/home/grosser/buildslave/perf-x86_64-penryn-O3-polly-fast/llvm.src/include/llvm/TableGen/Record.h:270:11: error: overriding 'virtual llvm::Init::~Init() noexcept (true)'
llvm-svn: 247222
Introduce an Address type to bundle a pointer value with an
alignment. Introduce APIs on CGBuilderTy to work with Address
values. Change core APIs on CGF/CGM to traffic in Address where
appropriate. Require alignments to be non-zero. Update a ton
of code to compute and propagate alignment information.
As part of this, I've promoted CGBuiltin's EmitPointerWithAlignment
helper function to CGF and made use of it in a number of places in
the expression emitter.
The end result is that we should now be significantly more correct
when performing operations on objects that are locally known to
be under-aligned. Since alignment is not reliably tracked in the
type system, there are inherent limits to this, but at least we
are no longer confused by standard operations like derived-to-base
conversions and array-to-pointer decay. I've also fixed a large
number of bugs where we were applying the complete-object alignment
to a pointer instead of the non-virtual alignment, although most of
these were hidden by the very conservative approach we took with
member alignment.
Also, because IRGen now reliably asserts on zero alignments, we
should no longer be subject to an absurd but frustrating recurring
bug where an incomplete type would report a zero alignment and then
we'd naively do a alignmentAtOffset on it and emit code using an
alignment equal to the largest power-of-two factor of the offset.
We should also now be emitting much more aggressive alignment
attributes in the presence of over-alignment. In particular,
field access now uses alignmentAtOffset instead of min.
Several times in this patch, I had to change the existing
code-generation pattern in order to more effectively use
the Address APIs. For the most part, this seems to be a strict
improvement, like doing pointer arithmetic with GEPs instead of
ptrtoint. That said, I've tried very hard to not change semantics,
but it is likely that I've failed in a few places, for which I
apologize.
ABIArgInfo now always carries the assumed alignment of indirect and
indirect byval arguments. In order to cut down on what was already
a dauntingly large patch, I changed the code to never set align
attributes in the IR on non-byval indirect arguments. That is,
we still generate code which assumes that indirect arguments have
the given alignment, but we don't express this information to the
backend except where it's semantically required (i.e. on byvals).
This is likely a minor regression for those targets that did provide
this information, but it'll be trivial to add it back in a later
patch.
I partially punted on applying this work to CGBuiltin. Please
do not add more uses of the CreateDefaultAligned{Load,Store}
APIs; they will be going away eventually.
llvm-svn: 246985
Added codegen for array section in 'depend' clause of 'task' directive. It emits to pointers, one for the begin of array section and another for the end of array section. Size of the section is calculated as (end + 1 - start) * sizeof(basic_element_type).
llvm-svn: 246422
Added codegen for array section in 'depend' clause of 'task' directive. It emits to pointers, one for the begin of array section and another for the end of array section. Size of the section is calculated as (end + 1 - start) * sizeof(basic_element_type).
llvm-svn: 246278
Summary:
float_cast_overflow is the only UBSan check without a source location attached.
This patch propagates SourceLocations where necessary to get them to the
EmitCheck() call.
Reviewers: rsmith, ABataev, rjmccall
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D11757
llvm-svn: 244568
The next code is generated for this construct:
```
if (__kmpc_cancellationpoint(ident_t *loc, kmp_int32 global_tid, kmp_int32 cncl_kind) != 0)
<exit from outer innermost construct>;
```
llvm-svn: 241239
If task directive has associated 'depend' clause then function kmp_int32 __kmpc_omp_task_with_deps ( ident_t *loc_ref, kmp_int32 gtid, kmp_task_t * new_task, kmp_int32 ndeps, kmp_depend_info_t *dep_list,kmp_int32 ndeps_noalias, kmp_depend_info_t *noalias_dep_list) must be called instead of __kmpc_omp_task().
If this directive has associated 'if' clause then also before a call of kmpc_omp_task_begin_if0() a function void __kmpc_omp_wait_deps ( ident_t *loc_ref, kmp_int32 gtid, kmp_int32 ndeps, kmp_depend_info_t *dep_list, kmp_int32 ndeps_noalias, kmp_depend_info_t *noalias_dep_list) must be called.
Array sections are not supported yet.
llvm-svn: 240532
Added parsing, sema analysis and codegen for '#pragma omp taskgroup' directive (OpenMP 4.0).
The code for directive is generated the following way:
#pragma omp taskgroup
<body>
void __kmpc_taskgroup(<loc>, thread_id);
<body>
void __kmpc_end_taskgroup(<loc>, thread_id);
llvm-svn: 240011
The following code is generated for reduction clause within 'omp simd' loop construct:
#pragma omp simd reduction(op:var)
for (...)
<body>
alloca priv_var
priv_var = <initial reduction value>;
<loop_start>:
<body> // references to original 'var' are replaced by 'priv_var'
<loop_end>:
var op= priv_var;
llvm-svn: 239881
This modification generates proper copyin/initialization sequences for array variables/parameters. Before they were considered as pointers, not arrays.
llvm-svn: 237691
Internal task structure must be generated like
typedef struct kmp_task {
void * shareds;
kmp_routine_entry_t routine;
kmp_int32 part_id;
kmp_routine_entry_t destructors;
} kmp_task_t;
struct kmp_task_t_with_privates {
kmp_task_t task_data;
.kmp_private. privates;
};
to avoid possible additional alignment bytes in first fields (shareds, routine, part_id and destructors). Runtime library is not aware of such kind additional alignment bytes.
llvm-svn: 237561
Fixed codegen for reduction operations min, max, && and ||. Codegen for them is quite similar and I was confused by this similarity.
Also added a call to kmpc_end_reduce() in atomic part of reduction codegen (call to kmpc_end_reduce_nowait() is not required).
Differential Revision: http://reviews.llvm.org/D9513
llvm-svn: 236689
Destructors are never called for cleanups, so we can't use SmallVector as a member.
Differential Revision: http://reviews.llvm.org/D9399
llvm-svn: 236491
Destructors are never called for cleanups, so we can't use SmallVector as a member.
Differential Revision: http://reviews.llvm.org/D9399
llvm-svn: 236487
Destructors are never called for cleanups, so we can't use SmallVector as a member.
Differential Revision: http://reviews.llvm.org/D9399
llvm-svn: 236482
Destructors are never called for cleanups, so we can't use SmallVector as a member.
Differential Revision: http://reviews.llvm.org/D9399
llvm-svn: 236480
For tasks codegen for private/firstprivate variables are different rather than for other directives.
1. Build an internal structure of privates for each private variable:
struct .kmp_privates_t. {
Ty1 var1;
...
Tyn varn;
};
2. Add a new field to kmp_task_t type with list of privates.
struct kmp_task_t {
void * shareds;
kmp_routine_entry_t routine;
kmp_int32 part_id;
kmp_routine_entry_t destructors;
.kmp_privates_t. privates;
};
3. Create a function with destructors calls for all privates after end of task region.
kmp_int32 .omp_task_destructor.(kmp_int32 gtid, kmp_task_t *tt) {
~Destructor(&tt->privates.var1);
...
~Destructor(&tt->privates.varn);
return 0;
}
4. Perform initialization of all firstprivate fields (by simple copying for POD data, copy constructor calls for classes) + provide address of a destructor function after kmpc_omp_task_alloc() and before kmpc_omp_task() calls.
kmp_task_t *new_task = __kmpc_omp_task_alloc(ident_t *, kmp_int32 gtid, kmp_int32 flags, size_t sizeof_kmp_task_t, size_t sizeof_shareds, kmp_routine_entry_t *task_entry);
CopyConstructor(new_task->privates.var1, *new_task->shareds.var1_ref);
new_task->shareds.var1_ref = &new_task->privates.var1;
...
CopyConstructor(new_task->privates.varn, *new_task->shareds.varn_ref);
new_task->shareds.varn_ref = &new_task->privates.varn;
new_task->destructors = .omp_task_destructor.;
kmp_int32 __kmpc_omp_task(ident_t *, kmp_int32 gtid, kmp_task_t *new_task)
Differential Revision: http://reviews.llvm.org/D9370
llvm-svn: 236479
For tasks codegen for private/firstprivate variables are different rather than for other directives.
1. Build an internal structure of privates for each private variable:
struct .kmp_privates_t. {
Ty1 var1;
...
Tyn varn;
};
2. Add a new field to kmp_task_t type with list of privates.
struct kmp_task_t {
void * shareds;
kmp_routine_entry_t routine;
kmp_int32 part_id;
kmp_routine_entry_t destructors;
.kmp_privates_t. privates;
};
3. Create a function with destructors calls for all privates after end of task region.
kmp_int32 .omp_task_destructor.(kmp_int32 gtid, kmp_task_t *tt) {
~Destructor(&tt->privates.var1);
...
~Destructor(&tt->privates.varn);
return 0;
}
4. Perform default initialization of all private fields (no initialization for POD data, default constructor calls for classes) + provide address of a destructor function after kmpc_omp_task_alloc() and before kmpc_omp_task() calls.
kmp_task_t *new_task = __kmpc_omp_task_alloc(ident_t *, kmp_int32 gtid, kmp_int32 flags, size_t sizeof_kmp_task_t, size_t sizeof_shareds, kmp_routine_entry_t *task_entry);
DefaultConstructor(new_task->privates.var1);
new_task->shareds.var1_ref = &new_task->privates.var1;
...
DefaultConstructor(new_task->privates.varn);
new_task->shareds.varn_ref = &new_task->privates.varn;
new_task->destructors = .omp_task_destructor.;
kmp_int32 __kmpc_omp_task(ident_t *, kmp_int32 gtid, kmp_task_t *new_task)
Differential Revision: http://reviews.llvm.org/D9322
llvm-svn: 236207
Fixed initialization of 'single' region completion + changed type of the third argument of __kmpc_copyprivate() runtime function to size_t.
llvm-svn: 236198
Emit the following code for 'taskwait' directive within tied task:
call i32 @__kmpc_omp_taskwait(<loc>, i32 <thread_id>);
Differential Revision: http://reviews.llvm.org/D9245
llvm-svn: 235836
If condition evaluates to true, the code executes task by calling @__kmpc_omp_task() runtime function.
If condition evaluates to false, the code executes serial version of the code by executing the following code:
call void @__kmpc_omp_task_begin_if0(<loc>, <threadid>, <task_t_ptr, returned by @__kmpc_omp_task_alloc()>);
proxy_task_entry(<gtid>, <task_t_ptr, returned by @__kmpc_omp_task_alloc()>);
call void @__kmpc_omp_task_complete_if0(<loc>, <threadid>, <task_t_ptr, returned by @__kmpc_omp_task_alloc()>);
Also it checks if the condition is constant and if it is constant it evaluates its value and then generates either parallel version of the code (if the condition evaluates to true), or the serial version of the code (if the condition evaluates to false).
Differential Revision: http://reviews.llvm.org/D9143
llvm-svn: 235507
Add codegen for 'ordered' directive:
__kmpc_ordered(ident_t *, gtid);
<associated statement>;
__kmpc_end_ordered(ident_t *, gtid);
Also for 'for' directives with the dynamic scheduling and an 'ordered' clause added a call to '__kmpc_dispatch_fini_(4|8)[u]()' function after increment expression for loop control variable:
while(__kmpc_dispatch_next(&LB, &UB)) {
idx = LB;
while (idx <= UB) { BODY; ++idx;
__kmpc_dispatch_fini_(4|8)[u](); // For ordered loops only.
} // inner loop
}
Differential Revision: http://reviews.llvm.org/D9070
llvm-svn: 235496
Adds proper codegen for 'firstprivate' clause in for directive. Initially codegen for 'firstprivate' clause was implemented for 'parallel' directive only.
Also this patch emits sync point only after initialization of firstprivate variables, not all private variables. This sync point is not required for privates, lastprivates etc., only for initialization of firstprivate variables.
Differential Revision: http://reviews.llvm.org/D8660
llvm-svn: 234978
Fixed a bug with codegen of variables with array types specified in 'copyprivate' clause of 'single' directive.
Differential Revision: http://reviews.llvm.org/D8914
llvm-svn: 234856
Replace boolean IsExplicit parameter of OpenMPRuntime::emitBarrierCall() method by OpenMPDirectiveKind Kind for better compatibility with the runtime library. Also add processing of 'nowait' clause on worksharing directives.
Differential Revision: http://reviews.llvm.org/D8659
llvm-svn: 233511
If there is at least one 'copyprivate' clause is associated with the single directive, the following code is generated:
```
i32 did_it = 0; \\ for 'copyprivate' clause
if(__kmpc_single(ident_t *, gtid)) {
SingleOpGen();
__kmpc_end_single(ident_t *, gtid);
did_it = 1; \\ for 'copyprivate' clause
}
<copyprivate_list>[0] = &var0;
...
<copyprivate_list>[n] = &varn;
call __kmpc_copyprivate(ident_t *, gtid, <copyprivate_list_size>,
<copyprivate_list>, <copy_func>, did_it);
...
void<copy_func>(void *LHSArg, void *RHSArg) {
Dst = (void * [n])(LHSArg);
Src = (void * [n])(RHSArg);
Dst[0] = Src[0];
... Dst[n] = Src[n];
}
```
All list items from all 'copyprivate' clauses are gathered into single <copyprivate list> (<copyprivate_list_size> is a size in bytes of this list) and <copy_func> is used to propagate values of private or threadprivate variables from the 'single' region to other implicit threads from outer 'parallel' region.
Differential Revision: http://reviews.llvm.org/D8410
llvm-svn: 232932
Codegen for threadprivate variables (and in some other cases) may cause crash of the compiler if some diagnostic is produced later. This happens because some of the autogenerated globals are not removed from InternalVars StringMap when llvm::Module is reset.
Differential Revision: http://reviews.llvm.org/D8360
llvm-svn: 232610
The task region is emmitted in several steps:
Emit a call to kmp_task_t *__kmpc_omp_task_alloc(ident_t *, kmp_int32 gtid, kmp_int32 flags, size_t sizeof_kmp_task_t, size_t sizeof_shareds, kmp_routine_entry_t *task_entry).
Here task_entry is a pointer to the function:
kmp_int32 .omp_task_entry.(kmp_int32 gtid, kmp_task_t *tt) {
TaskFunction(gtid, tt->part_id, tt->shareds);
return 0;
}
Copy a list of shared variables to field shareds of the resulting structure kmp_task_t returned by the previous call (if any).
Copy a pointer to destructions function to field destructions of the resulting structure kmp_task_t.
Emit a call to kmp_int32 __kmpc_omp_task(ident_t *, kmp_int32 gtid, kmp_task_t *new_task), where new_task is a resulting structure from previous items.
Differential Revision: http://reviews.llvm.org/D7560
llvm-svn: 231762
Patch adds proper generation of debug info for all OpenMP regions. Also, all OpenMP regions are generated in a termination scope, because standard does not allow to throw exceptions out of structured blocks, associated with the OpenMP regions
Differential Revision: http://reviews.llvm.org/D7935
llvm-svn: 231757
This reverts commit r231752.
It was failing to link with cmake:
lib64/libclangCodeGen.a(CGOpenMPRuntime.cpp.o):/home/espindola/llvm/llvm/tools/clang/lib/CodeGen/CGOpenMPRuntime.cpp:function clang::CodeGen::InlinedOpenMPRegionRAII::~InlinedOpenMPRegionRAII(): error: undefined reference to 'clang::CodeGen::EHScopeStack::popTerminate()'
clang-3.7: error: linker command failed with exit code 1 (use -v to see invocation)
llvm-svn: 231754
Patch adds proper generation of debug info for all OpenMP regions. Also, all OpenMP regions are generated in a termination scope, because standard does not allow to throw exceptions out of structured blocks, associated with the OpenMP regions
Differential Revision: http://reviews.llvm.org/D7935
llvm-svn: 231752
__kmpc_omp_flush() runtime library now has only one argument and is not a vararg
anymore. This update makes the codegen compatible with these changes.
llvm-svn: 230331
This patch emits the following code for the single directive:
#pragma omp single
<body>
<---->
if(__kmpc_single(...)) {
<body>
__kmpc_end_single(...);
}
Differential Revision: http://reviews.llvm.org/D7045
llvm-svn: 228275
For 'taskyield' directive emit call to kmp_int32 __kmpc_omp_taskyield(ident_t *,
kmp_int32 global_tid, int end_part); runtime function call with end_part arg set
to 0 (it is ignored).
Differential Revision: http://reviews.llvm.org/D7047
llvm-svn: 228272
Sorry for the noise, I managed to miss a bunch of recent regressions of
include orderings here. This should actually sort all the includes for
Clang. Again, no functionality changed, this is just a mechanical
cleanup that I try to run periodically to keep the #include lines as
regular as possible across the project.
llvm-svn: 225979
the simplest case, which is used when no chunk_size is specified in
the schedule(static) or no 'schedule' clause is specified - the
iteration space is divided by the library into chunks that are
approximately equal in size, and at most one chunk is distributed
to each thread. In this case, we do not need an outer loop in each
thread - each thread requests once which iterations range it should
handle (using __kmpc_for_static_init runtime call) and then runs the
inner loop on this range.
Differential Revision: http://reviews.llvm.org/D5865
llvm-svn: 224233
Adds generation of call to "i32 kmpc_cancel_barrier(ident_t *, i32)" libcall for explicitly specified barriers (OMP_IDENT_BARRIER_EXPL flag is added to "flags" field of "ident_t" structure).
Also this patch replaces all calls to "kmpc_barrier" function by calls of "__kmpc_cancel_barrier" function which provides additional functionality for OpenMP 4.0.
Also, library specific enum OpenMPLocationFlags moved to private section of CGOpenMPRuntime class to make it more independent from library implementation.
Differential Revision: http://reviews.llvm.org/D6447
llvm-svn: 223444
For each "omp flush" directive a call to "void kmpc_flush(ident_t *, ...)" function is generated.
Directive "omp flush" may have an associated list of variables to flush, but currently runtime function ignores them. So the patch generates just "call kmpc_flush(ident_t *<loc>, i32 0)".
Differential Revision: http://reviews.llvm.org/D6292
llvm-svn: 222409
Hans Wennborg