Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch gives earlier and better
diagnostics for the -D option.
Prior to this change, parsing of -D option was very loose: it assumed
that there is an equal sign (which to be fair is now checked by the
FileCheck executable) and that the part on the left of the equal sign
was a valid variable name. This commit adds logic to ensure that this
is the case and gives diagnostic when it is not, making it clear that
the issue came from a command-line option error. This is achieved by
sharing the variable parsing code into a new function ParseVariable.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60382
llvm-svn: 359447
This inlines 2 single line static methods
and simplifies the code.
It is also possible to remove the `Is64Bit`
variable since it is used only once,
but I am not sure it will be better for readability.
llvm-svn: 359445
The current code has the following problems:
`initSymtabSectionHeader` and `initStrtabSectionHeader` method
names saying us they are going to initialize the section headers.
Though for a few cases sh_flags field is initialized outside of them.
It does not look clean. This patch moves initialization of the
sh_flags inside these methods.
Also, it removes an excessive variable, what together with the above
change hopefully makes the code a bit more readable.
llvm-svn: 359443
Introduce two initial tests for 'register write' command. The tests
first clobber x86 general purpose registers, then call int3 to let lldb
write to them, then print the new values. FileCheck takes care of
verifying whether correct values were written.
Differential Revision: https://reviews.llvm.org/D61221
llvm-svn: 359441
Introduce tests for reading the eight x86 general purpose registers,
i.e. RAX/RBX/RCX/RDX/RBP/RSP/RSI/RDI and their shorter counterparts.
The test comes in separate 32-bit and 64-bit variant, targeting
appropriate processors.
While technically the 32-bit test could run on amd64, it would be
redundant to the 64-bit version, so just run one of them on each arch.
Differential Revision: https://reviews.llvm.org/D61210
llvm-svn: 359438
Summary:
The DWARF spec states that the DWARF stack arguments are numbered from
the top. Our implementation of DW_OP_pick was counting them from the
bottom.
This bug probably wasn't noticed because nobody (except my upcoming
postfix-to-DWARF converter) uses DW_OP_pick, but I've cross-checked with
gdb to confirm that counting from the top is the expected behavior.
This patch fixes the implementation to match the spec and gdb behavior
and adds a test.
Reviewers: jasonmolenda, clayborg
Subscribers: mgorny, aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D61182
llvm-svn: 359436
Summary:
This patch adds some basic operations for fp16
vectors, such as bitcast from fp16 to i16,
required to perform extract_subvector (also added
here) and extract_element.
Reviewers: SjoerdMeijer, DavidSpickett, t.p.northover, ostannard
Reviewed By: ostannard
Subscribers: javed.absar, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60618
llvm-svn: 359433
Summary:
The Procedure Call Standard for the Arm Architecture
states that float16x4_t and float16x8_t behave just
as uint16x4_t and uint16x8_t for argument passing.
This patch adds the fp16 vectors to the
ARMCallingConv.td file.
Reviewers: miyuki, ostannard
Reviewed By: ostannard
Subscribers: ostannard, javed.absar, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60720
llvm-svn: 359431
This uses llvm-lib.exe for the librarian instead of Visual Studio
provided lib.exe. Without this it is not possible to create static
libraries with -flto using the plugin.
Original patch by Steven Noonan
This fixes: PR41147
Differential Revision: https://reviews.llvm.org/D61193
llvm-svn: 359430
D61187 didn't delete config.clangd_xpc_support from test/
CLANGD_BUILD_XPC is defined in clangd/CMakeLists.txt and not available in test/lit.site.cfg.py.in
llvm-svn: 359428
Currently, clang's libTooling passes this function a fake argv0, which
means that no libTooling tools can find the standard headers on FreeBSD.
With this change, these will now work on any FreeBSD systems that have
procfs mounted. This isn't the right fix for the libTooling issue, but
it does bring the FreeBSD implementation of getExecutablePath closer to
the Linux and macOS implementations.
llvm-svn: 359427
This patch fixes PR40795, where constant-valued variable locations can
"leak" into blocks placed at higher addresses. The root of this is that
DbgEntityHistoryCalculator terminates all register variable locations at
the end of each block, but not constant-value variable locations.
Fixing this requires constant-valued DBG_VALUE instructions to be
broadcast into all blocks where the variable location remains valid, as
documented in the LiveDebugValues section of SourceLevelDebugging.rst,
and correct termination in DbgEntityHistoryCalculator.
Differential Revision: https://reviews.llvm.org/D59431
llvm-svn: 359426
Summary:
Motivation:
- this layout is a pain to work with
- without a common root, it's painful to express things like "disable clangd" (D61122)
- CMake/lit configs are a maintenance hazard, and the more the one-off hacks
for various tools are entangled, the more we see apathy and non-ownership.
This attempts to use the bare-minimum configuration needed (while still
supporting the difficult cases: windows, standalone clang build, dynamic libs).
In particular the lit.cfg.py and lit.site.cfg.py.in are merged into lit.cfg.in.
The logic in these files is now minimal.
(Much of clang-tools-extra's lit configs can probably be cleaned up by reusing
lit.llvm.llvm_config.use_clang(), and every llvm project does its own version of
LDPATH mangling. I haven't attempted to fix any of those).
Docs are still in clang-tools-extra/docs, I don't have any plans to touch those.
Reviewers: gribozavr
Subscribers: mgorny, javed.absar, MaskRay, jkorous, arphaman, kadircet, jfb, cfe-commits, ilya-biryukov, thakis
Tags: #clang
Differential Revision: https://reviews.llvm.org/D61187
llvm-svn: 359424
Summary:
Dump more information about "access violation" and "in page error" exceptions to
description. Description now contains data about read/write violation type and
actual address as described at
https://docs.microsoft.com/en-us/windows/desktop/api/winnt/ns-winnt-_exception_record
Reviewers: asmith, stella.stamenova
Reviewed By: stella.stamenova
Subscribers: teemperor, amccarth, abidh, lldb-commits, aleksandr.urakov
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D60519
llvm-svn: 359420
The 128/256 bit version of these instructions require an 'x' or 'y' suffix to
disambiguate the memory form in att syntax.
We were allowing the same suffix in intel syntax, but it appears gas does not
do that.
gas does allow the 'x' and 'y' suffix on register and broadcast forms even
though its not needed. We were allowing it on unmasked register form, but not on
masked versions or on masked or unmasked broadcast form.
While there fix some test coverage holes so they can be extended with the 'x'
and 'y' suffix tests.
llvm-svn: 359418
* char SymbolAddrStr[18] can't hold "%" PRIo64 which may need 22 characters.
* Use range-based for
* Delete unnecessary typedef
* format(...).print(Str, sizeof(Str)) + outs() << Str => outs() << format(...)
* Use cascading outs() << .. << ..
* Use iterator_range(Container &&c)
* (A & B) == B => A & B if B is a power of 2
* replace null sentinel in constants with makeArrayRef
llvm-svn: 359416
Symbol aliases are supported by all platforms that compiler-rt builtins
target, and we can use these instead of function redirects to avoid the
extra indirection.
This is part of the cleanup proposed in "[RFC] compiler-rt builtins
cleanup and refactoring".
Differential Revision: https://reviews.llvm.org/D60931
llvm-svn: 359413
Use the uniform single line C++/99 style for code comments.
This is part of the cleanup proposed in "[RFC] compiler-rt builtins
cleanup and refactoring".
Differential Revision: https://reviews.llvm.org/D60352
llvm-svn: 359411
Update formatting to use the LLVM style.
This is part of the cleanup proposed in "[RFC] compiler-rt builtins
cleanup and refactoring".
Differential Revision: https://reviews.llvm.org/D60351
llvm-svn: 359410
I got confused on the terminology, and the change in D60598 was not
correct. I was thinking of "exact" in terms of the result being
non-approximate. However, the relevant distinction here is whether
the result is
* Largest range such that:
Forall Y in Other: Forall X in Result: X BinOp Y does not wrap.
(makeGuaranteedNoWrapRegion)
* Smallest range such that:
Forall Y in Other: Forall X not in Result: X BinOp Y wraps.
(A hypothetical makeAllowedNoWrapRegion)
* Both. (makeExactNoWrapRegion)
I'm adding a separate makeExactNoWrapRegion method accepting a
single APInt (same as makeExactICmpRegion) and using it in the
places where the guarantee is relevant.
Differential Revision: https://reviews.llvm.org/D60960
llvm-svn: 359402
Some of the combines might be further improved if we lower more shuffles with X86ISD::VPERMV3 directly, instead of waiting to combine the results.
llvm-svn: 359400
This was originally part of D61028, but it's an independent diff.
If we try the repeated divisor reciprocal transform before producing an estimate sequence,
then we have an opportunity to use scalar fdiv. On x86, the trade-off is 1 divss vs. 5
vector FP ops in the default estimate sequence. On recent chips (Skylake, Ryzen), the
full-precision division is only 3 cycle throughput, so that's probably the better perf
default option and avoids problems from x86's inaccurate estimates.
The last 2 tests show that users still have the option to override the defaults by using
the function attributes for reciprocal estimates, but those patterns are potentially made
faster by converting the vector ops (including ymm ops) to scalar math.
Differential Revision: https://reviews.llvm.org/D61149
llvm-svn: 359398
Thomas Preud'homme