Instead, we're going to separate metadata from the Value hierarchy. See
PR21532.
This reverts commit r221375.
This reverts commit r221373.
This reverts commit r221359.
This reverts commit r221167.
This reverts commit r221027.
This reverts commit r221024.
This reverts commit r221023.
This reverts commit r220995.
This reverts commit r220994.
llvm-svn: 221711
Change `Instruction::getAllMetadata()` to modify a vector of `Value`
instead of `MDNode` and update call sites. This is part of PR21433.
llvm-svn: 221027
When changing the type of a load in Chandler's recent InstCombine changes, we can preserve the new 'nonnull' metadata.
I considered adding an assert since 'nonnull' is only valid on pointer types, but casting a pointer to a non-pointer would involve more than a bitcast anyways. If someone extends this transform to handle more than bitcasts, the verifier will report the malformed IR, so a separate assertion isn't needed. Also, the fpmath flags would have the same problem.
llvm-svn: 220324
inttoptr or ptrtoint cast provided there is datalayout available.
Eventually, the datalayout can just be required but in practice it will
always be there today.
To go with the ability to expose available values requiring a ptrtoint
or inttoptr cast, helpers are added to perform one of these three casts.
These smarts are necessary to finish canonicalizing loads and stores to
the operational type requirements without regressing fundamental
combines.
I've added some test cases. These should actually improve as the load
combining and store combining improves, but they may fundamentally be
highlighting some missing combines for select in addition to exercising
the specific added logic to load analysis.
llvm-svn: 220277
Our metadata scheme lazily assigns IDs to string metadata, but we have a mechanism to preassign them as well. Using a preassigned ID is helpful since we get compile time type checking, and avoid some (minimal) string construction and comparison. This change adds enum value for three existing metadata types:
+ MD_nontemporal = 9, // "nontemporal"
+ MD_mem_parallel_loop_access = 10, // "llvm.mem.parallel_loop_access"
+ MD_nonnull = 11 // "nonnull"
I went through an updated various uses as well. I made no attempt to get all uses; I focused on the ones which were easily grepable and easily to translate. For example, there were several items in LoopInfo.cpp I chose not to update.
llvm-svn: 220248
logic to look through pointer casts, making them trivially stronger in
the face of loads and stores with intervening pointer casts.
I've included a few test cases that demonstrate the kind of folding
instcombine can do without pointer casts and then variations which
obfuscate the logic through bitcasts. Without this patch, the variations
all fail to optimize fully.
This is more important now than it has been in the past as I've started
moving the load canonicialization to more closely follow the value type
requirements rather than the pointer type requirements and thus this
needs to be prepared for more pointer casts. When I made the same change
to stores several test cases regressed without logic along these lines
so I wanted to systematically improve matters first.
llvm-svn: 220178
loads.
This handles many more cases than just the AA metadata, some of them
suggested by Hal in his review of the AA metadata handling patch. I've
tried to test this behavior where tractable to do so.
I'll point out that I have specifically *not* included a test for
debuginfo because it was going to require 2 or 3 times as much work to
craft some input which would survive the "helpful" stripping of debug
info metadata that doesn't match the desired schema. This is another
good example of why the current state of write-ability for our debug
info metadata is unacceptable. I spent over 30 minutes trying to conjure
some test case that would survive, even copying from other debug info
tests, but it always failed to survive with no explanation of why or how
I might fix it. =[
llvm-svn: 220165
...)) and (load (cast ...)): canonicalize toward the former.
Historically, we've tried to load using the type of the *pointer*, and
tried to match that type as closely as possible removing as many pointer
casts as we could and trading them for bitcasts of the loaded value.
This is deeply and fundamentally wrong.
Repeat after me: memory does not have a type! This was a hard lesson for
me to learn working on SROA.
There is only one thing that should actually drive the type used for
a pointer, and that is the type which we need to use to load from that
pointer. Matching up pointer types to the loaded value types is very
useful because it minimizes the physical size of the IR required for
no-op casts. Similarly, the only thing that should drive the type used
for a loaded value is *how that value is used*! Again, this minimizes
casts. And in fact, the *only* thing motivating types in any part of
LLVM's IR are the types used by the operations in the IR. We should
match them as closely as possible.
I've ended up removing some tests here as they were testing bugs or
behavior that is no longer present. Mostly though, this is just cleanup
to let the tests continue to function as intended.
The only fallout I've found so far from this change was SROA and I have
fixed it to not be impeded by the different type of load. If you find
more places where this change causes optimizations not to fire, those
too are likely bugs where we are assuming that the type of pointers is
"significant" for optimization purposes.
llvm-svn: 220138
This change, which allows @llvm.assume to be used from within computeKnownBits
(and other associated functions in ValueTracking), adds some (optional)
parameters to computeKnownBits and friends. These functions now (optionally)
take a "context" instruction pointer, an AssumptionTracker pointer, and also a
DomTree pointer, and most of the changes are just to pass this new information
when it is easily available from InstSimplify, InstCombine, etc.
As explained below, the significant conceptual change is that known properties
of a value might depend on the control-flow location of the use (because we
care that the @llvm.assume dominates the use because assumptions have
control-flow dependencies). This means that, when we ask if bits are known in a
value, we might get different answers for different uses.
The significant changes are all in ValueTracking. Two main changes: First, as
with the rest of the code, new parameters need to be passed around. To make
this easier, I grouped them into a structure, and I made internal static
versions of the relevant functions that take this structure as a parameter. The
new code does as you might expect, it looks for @llvm.assume calls that make
use of the value we're trying to learn something about (often indirectly),
attempts to pattern match that expression, and uses the result if successful.
By making use of the AssumptionTracker, the process of finding @llvm.assume
calls is not expensive.
Part of the structure being passed around inside ValueTracking is a set of
already-considered @llvm.assume calls. This is to prevent a query using, for
example, the assume(a == b), to recurse on itself. The context and DT params
are used to find applicable assumptions. An assumption needs to dominate the
context instruction, or come after it deterministically. In this latter case we
only handle the specific case where both the assumption and the context
instruction are in the same block, and we need to exclude assumptions from
being used to simplify their own ephemeral values (those which contribute only
to the assumption) because otherwise the assumption would prove its feeding
comparison trivial and would be removed.
This commit adds the plumbing and the logic for a simple masked-bit propagation
(just enough to write a regression test). Future commits add more patterns
(and, correspondingly, more regression tests).
llvm-svn: 217342
In order to enable the preservation of noalias function parameter information
after inlining, and the representation of block-level __restrict__ pointer
information (etc.), additional kinds of aliasing metadata will be introduced.
This metadata needs to be carried around in AliasAnalysis::Location objects
(and MMOs at the SDAG level), and so we need to generalize the current scheme
(which is hard-coded to just one TBAA MDNode*).
This commit introduces only the necessary refactoring to allow for the
introduction of other aliasing metadata types, but does not actually introduce
any (that will come in a follow-up commit). What it does introduce is a new
AAMDNodes structure to hold all of the aliasing metadata nodes associated with
a particular memory-accessing instruction, and uses that structure instead of
the raw MDNode* in AliasAnalysis::Location, etc.
No functionality change intended.
llvm-svn: 213859
This patch reduces the stack memory consumption of the InstCombine
function "isOnlyCopiedFromConstantGlobal() ", that in certain conditions
could overflow the stack because of excessive recursiveness.
For example, in a case like this:
%0 = alloca [50025 x i32], align 4
%1 = getelementptr inbounds [50025 x i32]* %0, i64 0, i64 0
store i32 0, i32* %1
%2 = getelementptr inbounds i32* %1, i64 1
store i32 1, i32* %2
%3 = getelementptr inbounds i32* %2, i64 1
store i32 2, i32* %3
%4 = getelementptr inbounds i32* %3, i64 1
store i32 3, i32* %4
%5 = getelementptr inbounds i32* %4, i64 1
store i32 4, i32* %5
%6 = getelementptr inbounds i32* %5, i64 1
store i32 5, i32* %6
...
This piece of code crashes llvm when trying to apply instcombine on
desktop. On embedded devices this could happen with a much lower limit
of recursiveness. Some instructions (getelementptr and bitcasts) make
the function recursively call itself on their uses, which is what makes
the example above consume so much stack (it becomes a recursive
depth-first tree visit with a very big depth).
The patch changes the algorithm to be semantically equivalent, but
iterative instead of recursive and the visiting order to be from a
depth-first visit to a breadth-first visit (visit all the instructions
of the current level before the ones of the next one).
Now if a lot of memory is required a heap allocation is done instead of
the the stack allocation, avoiding the possible crash.
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D4355
Patch by Marcello Maggioni! We don't generally commit large stress test
that look for out of memory conditions, so I didn't request that one be
added to the patch.
llvm-svn: 212133
definition below all of the header #include lines, lib/Transforms/...
edition.
This one is tricky for two reasons. We again have a couple of passes
that define something else before the includes as well. I've sunk their
name macros with the DEBUG_TYPE.
Also, InstCombine contains headers that need DEBUG_TYPE, so now those
headers #define and #undef DEBUG_TYPE around their code, leaving them
well formed modular headers. Fixing these headers was a large motivation
for all of these changes, as "leaky" macros of this form are hard on the
modules implementation.
llvm-svn: 206844
header files and into the cpp files.
These files will require more touches as the header files actually use
DEBUG(). Eventually, I'll have to introduce a matched #define and #undef
of DEBUG_TYPE for the header files, but that comes as step N of many to
clean all of this up.
llvm-svn: 206777
Summary:
Previously the code didn't check if the before and after types for the
store were pointers to different address spaces. This resulted in
instcombine using a bitcast to convert between pointers to different
address spaces, causing an assertion due to the invalid cast.
It is not be appropriate to use addrspacecast this case because it is
not guaranteed to be a no-op cast. Instead bail out and do not do the
transformation.
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D3117
llvm-svn: 204733
This requires a number of steps.
1) Move value_use_iterator into the Value class as an implementation
detail
2) Change it to actually be a *Use* iterator rather than a *User*
iterator.
3) Add an adaptor which is a User iterator that always looks through the
Use to the User.
4) Wrap these in Value::use_iterator and Value::user_iterator typedefs.
5) Add the range adaptors as Value::uses() and Value::users().
6) Update *all* of the callers to correctly distinguish between whether
they wanted a use_iterator (and to explicitly dig out the User when
needed), or a user_iterator which makes the Use itself totally
opaque.
Because #6 requires churning essentially everything that walked the
Use-Def chains, I went ahead and added all of the range adaptors and
switched them to range-based loops where appropriate. Also because the
renaming requires at least churning every line of code, it didn't make
any sense to split these up into multiple commits -- all of which would
touch all of the same lies of code.
The result is still not quite optimal. The Value::use_iterator is a nice
regular iterator, but Value::user_iterator is an iterator over User*s
rather than over the User objects themselves. As a consequence, it fits
a bit awkwardly into the range-based world and it has the weird
extra-dereferencing 'operator->' that so many of our iterators have.
I think this could be fixed by providing something which transforms
a range of T&s into a range of T*s, but that *can* be separated into
another patch, and it isn't yet 100% clear whether this is the right
move.
However, this change gets us most of the benefit and cleans up
a substantial amount of code around Use and User. =]
llvm-svn: 203364
I am really sorry for the noise, but the current state where some parts of the
code use TD (from the old name: TargetData) and other parts use DL makes it
hard to write a patch that changes where those variables come from and how
they are passed along.
llvm-svn: 201827
Summary:
I searched Transforms/ and Analysis/ for 'ByVal' and updated those call
sites to check for inalloca if appropriate.
I added tests for any change that would allow an optimization to fire on
inalloca.
Reviewers: nlewycky
Differential Revision: http://llvm-reviews.chandlerc.com/D2449
llvm-svn: 200281
other in memory.
The motivation was to get rid of truncate and shift right instructions that get
in the way of paired load or floating point load.
E.g.,
Consider the following example:
struct Complex {
float real;
float imm;
};
When accessing a complex, llvm was generating a 64-bits load and the imm field
was obtained by a trunc(lshr) sequence, resulting in poor code generation, at
least for x86.
The idea is to declare that two load instructions is the canonical form for
loading two arithmetic type, which are next to each other in memory.
Two scalar loads at a constant offset from each other are pretty
easy to detect for the sorts of passes that like to mess with loads.
<rdar://problem/14477220>
llvm-svn: 190870
Use the pointer size if datalayout is available.
Use i64 if it's not, which is consistent with what other
places do when the pointer size is unknown.
The test doesn't really test this in a useful way
since it will be transformed to that later anyway,
but this now tests it for non-zero arrays and when
datalayout isn't available. The cases in
visitGetElementPtrInst should save an extra re-visit to
the newly created GEP since it won't need to cleanup after
itself.
llvm-svn: 188339
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
llvm-svn: 171366
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
llvm-svn: 169131
InstCombineLoadStoreAlloca.cpp, which had many issues.
(At least two bugs were noted on llvm-commits, and it was overly conservative.)
Instead, use getOrEnforceKnownAlignment.
llvm-svn: 168629
getIntPtrType support for multiple address spaces via a pointer type,
and also introduced a crasher bug in the constant folder reported in
PR14233.
These commits also contained several problems that should really be
addressed before they are re-committed. I have avoided reverting various
cleanups to the DataLayout APIs that are reasonable to have moving
forward in order to reduce the amount of churn, and minimize the number
of commits that were reverted. I've also manually updated merge
conflicts and manually arranged for the getIntPtrType function to stay
in DataLayout and to be defined in a plausible way after this revert.
Thanks to Duncan for working through this exact strategy with me, and
Nick Lewycky for tracking down the really annoying crasher this
triggered. (Test case to follow in its own commit.)
After discussing with Duncan extensively, and based on a note from
Micah, I'm going to continue to back out some more of the more
problematic patches in this series in order to ensure we go into the
LLVM 3.2 branch with a reasonable story here. I'll send a note to
llvmdev explaining what's going on and why.
Summary of reverted revisions:
r166634: Fix a compiler warning with an unused variable.
r166607: Add some cleanup to the DataLayout changes requested by
Chandler.
r166596: Revert "Back out r166591, not sure why this made it through
since I cancelled the command. Bleh, sorry about this!
r166591: Delete a directory that wasn't supposed to be checked in yet.
r166578: Add in support for getIntPtrType to get the pointer type based
on the address space.
llvm-svn: 167221
This optimization is really just replacing allocas wholesale with
globals, there is no scalarization.
The underlying motivation for this patch is to simplify the SROA pass
and focus it on splitting and promoting allocas.
llvm-svn: 162271
This patch removes ~70 lines in InstCombineLoadStoreAlloca.cpp and makes both functions a bit more aggressive than before :)
In theory, we can be more aggressive when removing an alloca than a malloc, because an alloca pointer should never escape, but we are not taking advantage of this anyway
llvm-svn: 159952
merge all zero-sized alloca's into one, fixing c43204g from the Ada ACATS
conformance testsuite. What happened there was that a variable sized object
was being allocated on the stack, "alloca i8, i32 %size". It was then being
passed to another function, which tested that the address was not null (raising
an exception if it was) then manipulated %size bytes in it (load and/or store).
The optimizers cleverly managed to deduce that %size was zero (congratulations
to them, as it isn't at all obvious), which made the alloca zero size, causing
the optimizers to replace it with null, which then caused the check mentioned
above to fail, and the exception to be raised, wrongly. Note that no loads
and stores were actually being done to the alloca (the loop that does them is
executed %size times, i.e. is not executed), only the not-null address check.
llvm-svn: 159202
GEPs, bit casts, and stores reaching it but no other instructions. These
often show up during the iterative processing of the inliner, SROA, and
DCE. Once we hit this point, we can completely remove the alloca. These
were actually showing up in the final, fully optimized code in a bunch
of inliner tests I've been working on, and notably they show up after
LLVM finishes optimizing away all function calls involved in
hash_combine(a, b).
llvm-svn: 154285
alignment. If that's the case, then we want to make sure that we don't increase
the alignment of the store instruction. Because if we increase it to be "more
aligned" than the pointer, code-gen may use instructions which require a greater
alignment than the pointer guarantees.
<rdar://problem/11043589>
llvm-svn: 152907
load and store reference same memory location, the memory location
is represented by getelementptr with two uses (load and store) and
the getelementptr's base is alloca with single use. At this point,
instructions from alloca to store can be removed.
(this pattern is generated when bitfield is accessed.)
For example,
%u = alloca %struct.test, align 4 ; [#uses=1]
%0 = getelementptr inbounds %struct.test* %u, i32 0, i32 0;[#uses=2]
%1 = load i8* %0, align 4 ; [#uses=1]
%2 = and i8 %1, -16 ; [#uses=1]
%3 = or i8 %2, 5 ; [#uses=1]
store i8 %3, i8* %0, align 4
llvm-svn: 127565
create a testcase where this matters. The select+load transformation only
occurs when isSafeToLoadUnconditionally is true, and in those situations,
instcombine also changes the underlying objects to be aligned. This seems
like a good idea regardless, and I've verified that it doesn't pessimize
the subsequent realignment.
llvm-svn: 94850
Duncan P. N. Exon Smith