We do not want to close STDOUT as there may have been several uses of it
such as the case: llc %s -o=- -pass-remarks-output=- -filetype=asm
which cause multiple closes of STDOUT_FILENO and/or use-after-close of it.
Using dup() in getFD doesn't work as we end up with original STDOUT_FILENO
open anyhow.
reviewed by Rafael Espindola
Differential Revision: https://reviews.llvm.org/D31505
llvm-svn: 299098
This reverts r299062, which caused build failures on Windows.
It also reverts the attempts to fix the windows builds in r299064 and r299065.
The introduction of namespace llvm::sys::detail makes MSVC, and seemingly also
mingw, complain about ambiguity with the existing namespace llvm::detail.
E.g.:
C:\b\slave\sanitizer-windows\llvm\include\llvm/Support/MathExtras.h(184): error C2872: 'detail': ambiguous symbol
C:\b\slave\sanitizer-windows\llvm\include\llvm/Support/PointerLikeTypeTraits.h(31): note: could be 'llvm::detail'
C:\b\slave\sanitizer-windows\llvm\include\llvm/Support/Host.h(80): note: or 'llvm::sys::detail'
In r299064 and r299065 I tried to fix these ambiguities, based on the errors
reported in the log files. It seems however that the build stops early when
this kind of error is encountered, and many build-then-fix-iterations on
Windows may be needed to fix this. Therefore reverting r299062 for now to
get the build working again on Windows.
llvm-svn: 299066
This refactors getHostCPUName so that for the architectures that get the
host cpu info on linux from /proc/cpuinfo, the /proc/cpuinfo parsing
logic is present in the build, even if it wasn't built on a linux system
for that architecture.
Since the code is present in the build, we can then test that code also
on other systems, i.e. we don't need to have buildbots setup for all
architectures on linux to be able to test this. Instead, developers will
test this as part of the regression test run.
As an example, a few unit tests are added to test getHostCPUName for ARM
running linux. A unit test is preferred over a lit-based test, since the
expectation is that in the future, the functionality here will grow over
what can be tested with "llc -mcpu=native".
This is a preparation step to enable implementing the range of
improvements discussed on PR30516, such as adding AArch64 support,
support for big.LITTLE systems, reducing code duplication.
Differential Revision: https://reviews.llvm.org/D31236
llvm-svn: 299060
Several static functions from the signal API can be invoked
simultaneously; RemoveFileOnSignal for instance can be called indirectly
by multiple parallel loadModule() invocations, which might lead to
the assertion:
Assertion failed: (NumRegisteredSignals < array_lengthof(RegisteredSignalInfo) && "Out of space for signal handlers!"),
function RegisterHandler, file /llvm/lib/Support/Unix/Signals.inc, line 105.
RemoveFileOnSignal calls RegisterHandlers(), which isn't currently
mutex protected, leading to the behavior above. This potentially affect
a few other users of RegisterHandlers() too.
rdar://problem/30381224
llvm-svn: 298871
This method is pretty new and probably isn't use much in the code base so this should have a negligible size impact. The OR and XOR operators are already inline.
llvm-svn: 298870
Summary:
It should return <0, 0, or >0 for less-than, equal, and greater-than like
strcmp() (according to the history, it used to be implemented with
strcmp()) but it actually returned 0, or 1 for not-equal and equal.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: qcolombet, llvm-commits
Differential Revision: https://reviews.llvm.org/D30996
llvm-svn: 298844
This is something of an edge case, but when the $HOME environment
variable is not set, we can still look in the password database
to get the current user's home directory.
Added a test for this by getting the value of $HOME, then unsetting
it, then calling home_directory() and verifying that it succeeds
and that the value is the same as what we originally read from
the environment.
llvm-svn: 298513
In doing so, clean up the MD5 interface a little. Most
existing users only care about the lower 8 bytes of an MD5,
but for some users that care about the upper and lower,
there wasn't a good interface. Furthermore, consumers
of the MD5 checksum were required to handle endianness
details on their own, so it seems reasonable to abstract
this into a nicer interface that just gives you the right
value.
Differential Revision: https://reviews.llvm.org/D31105
llvm-svn: 298322
This is a safeguard against data loss if the user specifies a directory
that is not a cache directory. Teach the existing cache pruning clients
to create files with appropriate names.
Differential Revision: https://reviews.llvm.org/D31109
llvm-svn: 298271
I'm not sure if zeroing VAL before writing pVal is really necessary, but at least one other place did it in code.
But by taking the store out of line, this reduces the opt binary by about 20k on my local x86-64 build.
llvm-svn: 298233
Go back to behavior pre-r231309 and reduce the timeout from 8 to ~1.5
min now that we have (a) PCMCache mechanism (r298165) and (b) timeout
that doesn't cause a failure, but actually build the module (r298175).
rdar://problem/30297862
llvm-svn: 298176
Previously which path syntax we supported dependend on what
platform we were compiling LLVM on. While this is normally
desirable, there are situations where we need to be able to
handle a path that we know was generated on a remote host.
Remote debugging, for example, or parsing debug info.
99% of the code in LLVM for handling paths was platform
agnostic and literally just a few branches were gated behind
pre-processor checks, so this changes those sites to use
runtime checks instead, and adds a flag to every path
API that allows one to override the host native syntax.
Differential Revision: https://reviews.llvm.org/D30858
llvm-svn: 298004
This change adds support for functions to set and get file permissions, in a similar manner to the C++17 permissions() function in <filesystem>. The setter uses chmod on Unix systems and SetFileAttributes on Windows, setting the permissions as passed in. The getter simply uses the existing status() function.
Prior to this change, status() would always return an unknown value for the permissions on a Windows file, making it impossible to test the new function on Windows. I have therefore added support for this as well. On Linux, prior to this change, the permissions included the file type, which should actually be accessed via a different member of the file_status class.
Note that on Windows, only the *_write permission bits have any affect - if any are set, the file is writable, and if not, the file is read-only. This is in common with what MSDN describes for their behaviour of std::filesystem::permissions(), and also what boost::filesystem does.
The motivation behind this change is so that we can easily test behaviour on read-only files in LLVM unit tests, but I am sure that others may find it useful in some situations.
Reviewers: zturner, amccarth, aaron.ballman
Differential Revision: https://reviews.llvm.org/D30736
llvm-svn: 297945
The idea is that the policy string fully specifies the policy and is portable
between clients.
Differential Revision: https://reviews.llvm.org/D31020
llvm-svn: 297927
Change the function that implements the pruning into a free function that
takes the policy as a struct argument.
Differential Revision: https://reviews.llvm.org/D31009
llvm-svn: 297907
Previously we did not have support for writing detailed
module information for each module, as well as the symbol
records. This patch adds support for this, and in doing
so enables the ability to construct minimal PDBs from
just a few lines of YAML. A test is added to illustrate
this functionality.
llvm-svn: 297900
Previously, if you attempted to write a key/value pair and the
value was equal to the key's default value, we would not output
the value. Sometimes it is useful to be able to see this value
in the output anyway.
llvm-svn: 297864
Summary:
Previously, ParseCommandLineOptions returns false and ignores error messages
when IgnoreErrors. It would be useful to also return error messages if users
decide to check parsing result instead of having the program exit on error.
Reviewers: chandlerc, mehdi_amini, rnk
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30893
llvm-svn: 297810
Previously, it created a temporary directory and then failed when
FileOutputBuffer tried to rename that file to the destination file
(which is actually a directory name).
Differential Revision: https://reviews.llvm.org/D30912
llvm-svn: 297679
If raw_fd_ostream is constructed with the path of "-", it claims
ownership of the stdout file descriptor. This means that it closes
stdout when it is destroyed. If there are multiple users of
raw_fd_ostream wrapped around stdout, then a crash can occur because
of operations on a closed stream.
An example of this would be running something like "clang -S -o - -MD
-MF - test.cpp". Alternatively, using outs() (which creates a local
version of raw_fd_stream to stdout) anywhere combined with such a
stream usage would cause the crash.
The fix duplicates the stdout file descriptor when used within
raw_fd_ostream, so that only that particular descriptor is closed when
the stream is destroyed.
Patch by James Henderson!
llvm-svn: 297624
In openFileForRead, we would not previously return an error
if real_path resolution failed. After a recent patch, we
started propagating this error up. This caused a failure
in clang when trying to call openFileForRead("nul"). This
patch restores the previous behavior of not propagating this
error up.
llvm-svn: 297488
LLVM already has real_path like functionality, but it is
cumbersome to use and involves clean up after (e.g. you have
to call openFileForRead, then close the resulting FD).
Furthermore, on Windows it doesn't work for directories since
opening a directory and opening a file require slightly
different flags.
So I add a simple function `real_path` which works for all
paths on all platforms and has a simple to use interface.
In doing so, I add the ability to opt in to resolving tilde
expressions (e.g. ~/foo), which are normally handled by
the shell.
Differential Revision: https://reviews.llvm.org/D30668
llvm-svn: 297483
We currently have to insert bits via a temporary variable of the same size as the target with various shift/mask stages, resulting in further temporary variables, all of which require the allocation of memory for large APInts (MaskSizeInBits > 64).
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::insertBits() helper method which avoids the temporary memory allocation and masks/inserts the raw bits directly into the target.
Differential Revision: https://reviews.llvm.org/D30780
llvm-svn: 297458
We already have a function create_directories() which can create
an entire tree, and remove() which can remove an empty directory,
but we do not have remove_directories() which can remove an entire
tree. This patch adds such a function.
Because removing a directory tree can have dangerous consequences
when the tree contains a directory symlink, the patch here updates
the existing directory_iterator construct to optionally not follow
symlinks (previously it would always follow symlinks). The delete
algorithm uses this flag so that for symlinks, only the links are
removed, and not the targets.
On Windows this is implemented with SHFileOperation, which also
does not recurse into symbolic links or junctions.
Differential Revision: https://reviews.llvm.org/D30676
llvm-svn: 297314
This was originall reverted due to some test failures in
ModuleCache and TestCompDirSymlink. These issues have all
been resolved and the code now passes all tests.
Differential Revision: https://reviews.llvm.org/D30698
llvm-svn: 297300
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
The problem with the previous commit appears to have been that TableGen was including CodeGen/LowLevelType.h instead of Support/LowLevelTypeImpl.h.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297241
Move the __try/__except block outside of the set_thread_name function to avoid a conflict with object unwinding due to the use of the llvm::Storage.
Differential Revision: https://reviews.llvm.org/D30707
llvm-svn: 297192
More module problems. This time it only showed up in the stage 2 compile of
clang-x86_64-linux-selfhost-modules-2 but not the stage 1 compile.
Somehow, this change causes the build to need Attributes.gen before it's been
generated.
llvm-svn: 297188
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297177
This extends an earlier change that did similar for add and sub operations.
With this first patch we lose the fastpath for the single word case as operator&= and friends don't support it. This can be added there if we think that's important.
I had to change some functions in the APInt class since the operator overloads were moved out of the class and can't be used inside the class now. The getBitsSet change collides with another outstanding patch to implement it with setBits. But I didn't want to make this patch dependent on that series.
I've also removed the Or, And, Xor functions which were rarely or never used. I already commited two changes to remove the only uses of Or that existed.
Differential Revision: https://reviews.llvm.org/D30612
llvm-svn: 297121
This deletes LLDB's FileType enumeration and replaces all
users, and all calls to functions that check whether a file
exists etc with corresponding calls to LLVM.
Differential Revision: https://reviews.llvm.org/D30624
llvm-svn: 297116
Summary:
There are quite a few places in the code base that do something like the following to set the high or low bits in an APInt.
KnownZero |= APInt::getHighBitsSet(BitWidth, BitWidth - 1);
For BitWidths larger than 64 this creates a short lived APInt with malloced storage. I think it might even call malloc twice. Its better to just provide methods that can set the necessary bits without the temporary APInt.
I'll update usages that benefit in a separate patch.
Reviewers: majnemer, MatzeB, davide, RKSimon, hans
Reviewed By: hans
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30525
llvm-svn: 297111
Do not include <sys/user.h> on NetBSD. It's dead file and will be removed.
No need to include <sys/sysctl.h> in this code context on NetBSD.
llvm-svn: 296973
pthread_self() returns a pthread_t, but we were setting it to
an int. It seems the cast to int when calling sysctl is still
the correct thing to do, though.
llvm-svn: 296892
Doing so defines the type llvm::thread. On FreeBSD, we need
to call a macro which references its own ::thread type, which
causes an ambiguity due to ADL when inside of the llvm namespace.
Since we don't even need this unless LLVM_ENABLE_THREADS == 1,
we don't even need this type anyway, as it is always equal to
std::thread, so we can just use that directly.
llvm-svn: 296891
Applications often need the current thread id when making
system calls, and some operating systems provide the notion
of a thread name, which can be useful in enabling better
diagnostics when debugging or logging.
This patch adds an accessor for the thread id, and "best effort"
getters and setters for the thread name. Since this is
non critical functionality, no error is returned to indicate
that a platform doesn't support thread names.
Differential Revision: https://reviews.llvm.org/D30526
llvm-svn: 296887
After several smaller patches to get most of the core improvements
finished up, this patch is a straight move and header fixup of
the source.
Differential Revision: https://reviews.llvm.org/D30266
llvm-svn: 296810
Original commit message:
"Allow externally dlopen-ed libraries to be registered as permanent libraries.
This is also useful in cases when llvm is in a shared library. First we dlopen
the llvm shared library and then we register it as a permanent library in order
to keep the JIT and other services working.
Patch reviewed by Vedant Kumar (D29955)!"
llvm-svn: 296774
Summary:
This patch moves the clearUnusedBits calls into the two different initialization paths for APInt from a uint64_t. This allows the compiler to better optimize the clearing of the unused bits for the single word case. And it puts the clearing for the multi word case into the initSlowCase function to save code. In the common case of initializing with 0 this allows the clearing to be completely optimized out for the single word case.
On my local x86 build this is showing a ~45kb reduction in the size of the opt binary.
Reviewers: RKSimon, hans, majnemer, davide, MatzeB
Reviewed By: hans
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30486
llvm-svn: 296677
Windows does not treat `~` as a reference to home directory, so the call
to `llvm::sys::path::native` on, say, `~/somedir` produces `~\somedir`,
which has different meaning than the original path. With this change
tilde is expanded on Windows to user profile directory. Such behavior
keeps original meaning of the path and is consistent with the algorithm
of `llvm::sys::path::home_directory`.
Differential Revision: https://reviews.llvm.org/D27527
llvm-svn: 296590
Requesting DWARF v5 will now get you the new compile-unit and
type-unit headers. llvm-dwarfdump will also recognize them.
Differential Revision: http://reviews.llvm.org/D30206
llvm-svn: 296514
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 296474
This is also useful in cases when llvm is in a shared library. First we dlopen
the llvm shared library and then we register it as a permanent library in order
to keep the JIT and other services working.
Patch reviewed by Vedant Kumar (D29955)!
llvm-svn: 296442
The current pattern for extract bits in range is typically:
Mask.lshr(BitOffset).trunc(SubSizeInBits);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation of memory for the temporary variable.
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::extractBits() helper method which avoids the temporary memory allocation.
Differential Revision: https://reviews.llvm.org/D30336
llvm-svn: 296272
The current pattern for extract bits in range is typically:
Mask.lshr(BitOffset).trunc(SubSizeInBits);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation of memory for the temporary variable.
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::extractBits() helper method which avoids the temporary memory allocation.
Differential Revision: https://reviews.llvm.org/D30336
llvm-svn: 296147
The current pattern for extract bits in range is typically:
Mask.lshr(BitOffset).trunc(SubSizeInBits);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation of memory for the temporary variable.
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::extractBits() helper method which avoids the temporary memory allocation.
Differential Revision: https://reviews.llvm.org/D30336
llvm-svn: 296141
The current pattern for setting bits in range is typically:
Mask |= APInt::getBitsSet(MaskSizeInBits, LoPos, HiPos);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation memory for the temporary variable.
This is one of the key compile time issues identified in PR32037.
This patch adds the APInt::setBits() helper method which avoids the temporary memory allocation completely, this first implementation uses setBit() internally instead but already significantly reduces the regression in PR32037 (~10% drop). Additional optimization may be possible.
I investigated whether there is need for APInt::clearBits() and APInt::flipBits() equivalents but haven't seen these patterns to be particularly common, but reusing the code would be trivial.
Differential Revision: https://reviews.llvm.org/D30265
llvm-svn: 296102
The function for distinguishing local and remote files added in r295768
unconditionally uses linux/magic.h header to provide necessary
filesystem magic numbers. However, in kernel headers predating 2.6.18
the magic numbers are spread throughout multiple include files.
Furthermore, LLVM did not require kernel headers being installed so far.
To increase the portability across different versions of Linux kernel
and different Linux systems, add CMake header checks for linux/magic.h
and -- if it is missing -- the linux/nfs_fs.h and linux/smb.h headers
which contained the numbers previously.
Furthermore, since the numbers are static and the feature does not seem
critical enough to make LLVM require kernel headers at all, add fallback
constants for the case when none of the necessary headers is available.
Differential Revision: https://reviews.llvm.org/D30261
llvm-svn: 295854
Since I'm only seeing failures on OSX, and it's saying
permission denied, I'm suspecting this is due to the addition
of the MAP_RESILIENT_CODESIGN and/or MAP_RESILIENT_MEDIA flags.
Speculatively trying to remove those to get the bots working.
llvm-svn: 295770
There are still over 3400 files remaining with this property set, but there are tens of thousands more with the property not set. Until we decide what to do on a global scale, this at least unblocks me temporarily.
llvm-svn: 295756
Summary:
We have support for bisection, and bugpoint can reduce testcases
often to a single pass. But that doesn't help reduce it to a single
transform by a single pass. Which debug counting lets us do.
Debug counting lets you instrument a pass so that it only executes a
certain thing (rwhatever you want) after skipping it a certain time of
times, and then only does a certain number of executions before saying
"skip" again.
To make it concrete, for predicateinfo, if i instrument use renaming,
i can make it so it skips renaming the first N uses, renames the next
N, and then skips the rest.
This lets you narrow down a miscompilation to, often, a single
transformation, and then also debug it (by using the same command line
parameters).
Reviewers: chandlerc, davide, mehdi_amini
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D29998
llvm-svn: 295593
This set of patches adds support for Cavium ThunderX ARM64 processors:
* ThunderX
* ThunderX T81
* ThunderX T83
* ThunderX T88
Patch by Stefan Teleman
Differential Revision: https://reviews.llvm.org/D28891
llvm-svn: 295475
TimerGroup was showing up on a leak in valigrind, and
used some pretty complex code to implement a singleton.
This patch replaces the implementation with a vastly simpler
one.
Differential Revision: https://reviews.llvm.org/D28367
llvm-svn: 295370
LLVM defines `PTHREAD_LIB` which is used by AddLLVM.cmake and various projects
to correctly link the threading library when needed. Unfortunately
`PTHREAD_LIB` is defined by LLVM's `config-ix.cmake` file which isn't installed
and therefore can't be used when configuring out-of-tree builds. This causes
such builds to fail since `pthread` isn't being correctly linked.
This patch attempts to fix that problem by renaming and exporting
`LLVM_PTHREAD_LIB` as part of`LLVMConfig.cmake`. I renamed `PTHREAD_LIB`
because It seemed likely to cause collisions with downstream users of
`LLVMConfig.cmake`.
llvm-svn: 294690
Gcc supports target armv7ve which is armv7-a with virtualization
extensions. This change adds support for this in llvm for gcc
compatibility.
Also remove redundant FeatureHWDiv, FeatureHWDivARM for a few models as
this is specified automatically by FeatureVirtualization.
Patch by Manoj Gupta.
Differential Revision: https://reviews.llvm.org/D29472
llvm-svn: 294661
We only implemented it for one of the 3 HLE instructions and that instruction is also under the RTM flag. Clang only implements the RTM flag from its command line.
llvm-svn: 294562
This patch does the following.
1. Adds an Intrinsic int_x86_clzero which works with __builtin_ia32_clzero
2. Identifies clzero feature using cpuid info. (Function:8000_0008, Checks if EBX[0]=1)
3. Adds the clzero feature under znver1 architecture.
4. The custom inserter is added in Lowering.
5. A testcase is added to check the intrinsic.
6. The clzero instruction is added to assembler test.
Patch by Ganesh Gopalasubramanian with a couple formatting tweaks, a disassembler test, and using update_llc_test.py from me.
Differential revision: https://reviews.llvm.org/D29385
llvm-svn: 294558
Summary:
The formatter has three knobs:
- the user can choose which time unit to use for formatting (default: whatever is the unit of the input)
- he can choose whether the unit gets displayed (default: yes)
- he can affect the way the number itself is formatted via standard number formatting options (default:default)
Reviewers: zturner, inglorion
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29481
llvm-svn: 294326
Summary:
Make this interface reusable similarly to std::call_once and std::once_flag interface.
This makes porting LLDB to NetBSD easier as there was in the original approach a portable way to specify a non-static once_flag. With this change translating std::once_flag to llvm::once_flag is mechanical.
Sponsored by <The NetBSD Foundation>
Reviewers: mehdi_amini, labath, joerg
Reviewed By: mehdi_amini
Subscribers: emaste, clayborg
Differential Revision: https://reviews.llvm.org/D29566
llvm-svn: 294143
Summary: As per title. I ran into that limitation of the API doing some other work, so I though that'd be a nice addition.
Reviewers: jroelofs, compnerd, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29503
llvm-svn: 294063
Committing after fixing suggested changes and tested release/debug builds on
x86_64-linux and arm/aarch64 builds.
Differential revision: https://reviews.llvm.org/D29042
llvm-svn: 293850
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
Summary: This is an attempt to reduce the verbose manual dispatching code in APFloat. This doesn't handle multiple dispatch on single discriminator (e.g. APFloat::add(const APFloat&)), nor handles multiple dispatch on multiple discriminators (e.g. APFloat::convert()).
Reviewers: hfinkel, echristo, jlebar
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D29161
llvm-svn: 293255
Summary:
Use the O_CLOEXEC flag only when it is available. Some old systems (e.g.
SLES10) do not support this flag. POSIX explicitly guarantees that this
flag can be checked for using #if, so there is no need for a CMake
check.
In case O_CLOEXEC is not supported, fall back to fcntl(FD_CLOEXEC)
instead.
Reviewers: rnk, rafael, mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28894
llvm-svn: 292912
Summary:
This adds a cross-platform way of setting the current working directory
analogous to the existing current_path() function used for retrieving
it. The function will be used in lldb.
Reviewers: rafael, silvas, zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29035
llvm-svn: 292907
Summary:
There's a comment in XorSlowCase that says "0^0==1" which isn't true. 0 xored with 0 is still 0. So I don't think we need to clear any unused bits here.
Now there is no difference between XorSlowCase and AndSlowCase/OrSlowCase other than the operation being performed
Reviewers: majnemer, MatzeB, chandlerc, bkramer
Reviewed By: MatzeB
Subscribers: chfast, llvm-commits
Differential Revision: https://reviews.llvm.org/D28986
llvm-svn: 292873
Summary:
This patch changes the layout of DoubleAPFloat, and adjust all
operations to do either:
1) (IEEEdouble, IEEEdouble) -> (uint64_t, uint64_t) -> PPCDoubleDoubleImpl,
then run the old algorithm.
2) Do the right thing directly.
1) includes multiply, divide, remainder, mod, fusedMultiplyAdd, roundToIntegral,
convertFromString, next, convertToInteger, convertFromAPInt,
convertFromSignExtendedInteger, convertFromZeroExtendedInteger,
convertToHexString, toString, getExactInverse.
2) includes makeZero, makeLargest, makeSmallest, makeSmallestNormalized,
compare, bitwiseIsEqual, bitcastToAPInt, isDenormal, isSmallest,
isLargest, isInteger, ilogb, scalbn, frexp, hash_value, Profile.
I could split this into two patches, e.g. use
1) for all operatoins first, then incrementally change some of them to
2). I didn't do that, because 1) involves code that converts data between
PPCDoubleDoubleImpl and (IEEEdouble, IEEEdouble) back and forth, and may
pessimize the compiler. Instead, I find easy functions and use
approach 2) for them directly.
Next step is to implement move multiply and divide from 1) to 2). I don't
have plans for other functions in 1).
Differential Revision: https://reviews.llvm.org/D27872
llvm-svn: 292839
Summary:
This makes the file descriptors on unix platform non-inheritable (O_CLOEXEC).
There is no change in behavior on windows, as the handles were already
non-inheritable there.
Reviewers: rnk, rafael
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D28854
llvm-svn: 292401
Enable an ELFObjectFile to read the its arm build attributes to
produce a target triple with a specific ARM architecture.
llvm-objdump now uses this functionality to automatically produce
a more accurate target.
Differential Revision: https://reviews.llvm.org/D28769
llvm-svn: 292366
No any changes, will follow up with D28807 commit containing APLi change for clang
to fix build issues happened.
Original commit message:
[Support/Compression] - Change zlib API to return Error instead of custom status.
Previously API returned custom enum values.
Patch changes it to return Error with string description.
That should help users to report errors in universal way.
Differential revision: https://reviews.llvm.org/D28684
llvm-svn: 292226
Previously API returned custom enum values.
Patch changes it to return Error with string description.
That should help users to report errors in universal way.
Differential revision: https://reviews.llvm.org/D28684
llvm-svn: 292214
Summary:
Revert [ARM] Fix ubig32_t read in ARMAttributeParser
Now using support functions to read data instead of trying to
perform casts.
===========================================================
Revert [ARM] Enable objdump to construct triple for ARM
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Subscribers: llvm-commits, samparker, aemerson, mgorny
Differential Revision: https://reviews.llvm.org/D28683
llvm-svn: 291911
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Differential Revision: https://reviews.llvm.org/D28281
llvm-svn: 291898
Summary:
This patch enables the following
1. AMD family 17h architecture using "znver1" tune flag (-march, -mcpu).
2. ISAs that are enabled for "znver1" architecture.
3. Checks ADX isa from cpuid to identify "znver1" flag when -march=native is used.
4. ISAs FMA4, XOP are disabled as they are dropped from amdfam17.
5. For the time being, it uses the btver2 scheduler model.
6. Test file is updated to check this flag.
This item is linked to clang review item https://reviews.llvm.org/D28018
Patch by Ganesh Gopalasubramanian
Reviewers: RKSimon, craig.topper
Subscribers: vprasad, RKSimon, ashutosh.nema, llvm-commits
Differential Revision: https://reviews.llvm.org/D28017
llvm-svn: 291543
If we split a filename into `Name` and `Prefix`, `Prefix` is at most
145 bytes. We had a bug that didn't split a path correctly. This bug
was pointed out by Rafael in the post commit review.
This patch adds a unit test for TarWriter to verify the fix.
llvm-svn: 291494
When writing to a non regular file we cannot rename to it. Since we
have to write, we may as well create a temporary file to avoid trying
to create an unique file in /dev when trying to write to /dev/null.
llvm-svn: 291485
Most (maybe all?) tar commands can handle tar archives with blank
version fields, but POSIX requires "00" to be set to the field, so
doing it is good for compliance.
llvm-svn: 291479
Tar's Ustar header has the "prefix" field to store a directory
part of a filename. It is not as flexible as the PAX-extended
filename because there's still a limitation on the maximum filename
size, but it mitigates the situation.
This patch should unbreak some Windows buildbots that uses very
old tar command.
llvm-svn: 291340
This usage of strcpy and snprintf was certainly safe, but using them
sets off various deprecation and lint warnings. Easier to just write the
belt and suspenders version.
llvm-svn: 291256
We use PAX headers to store long filenames (>= 100 bytes).
It is not needed to emit PAX headers if filenames fit in the
Ustar header. This patch implements that optimization.
llvm-svn: 291215
In LLD, we create cpio archive files for --reproduce command.
cpio was not a bad choice because it is very easy to create, but
it was sometimes hard to use because people are not familiar with
cpio command.
I noticed that creating a tar archive isn't as hard as I thought.
So I implemented it in this patch.
Differential Revision: https://reviews.llvm.org/D28091
llvm-svn: 291209
This reverts commit 63165f6ae3bac1623be36d4b3ce63afa1d51a30a.
After making this change, I discovered that _Unwind_Backtrace is
unable to unwind past a signal handler after an assertion failure.
I filed a bug report about that issue in rdar://29866587 but even if
we get a fix soon, it will be awhile before it get released.
llvm-svn: 291207
Summary:
Intel's i5-6300U CPU is reporting to have a model id of 78 (4e).
The Host detection assumes that to be Skylake Xeon (with AVX512 support),
instead of a normal Skylake machine.
Patch by: Valentin Churavy
Reviewers: nalimilan, craig.topper
Subscribers: hfinkel, tkelman, craig.topper, nalimilan, llvm-commits
Differential Revision: https://reviews.llvm.org/D28221
llvm-svn: 291084
This CPU type was not previously recognized by LLVM which led to emitting
poor (and sometimes incorrect) code in some JIT workloads on such a machine.
llvm-svn: 290961
Provide a distinct contents for semBogus and semPPCDoubleDouble in order
to prevent compilers from collapsing them to a single memory address,
while we heavily rely on every semantic having distinct address.
This happens if insecure optimization collapsing identical values is
enabled. As a result, APFloats of semBogus are indistinguishable from
semPPCDoubleDouble -- and whenever the move constructor is used, the old
value beings being incorrectly recognized as a semPPCDoubleDouble.
Since the values in semPPCDoubleDouble are not used anywhere,
we can easily solve this issue via altering the value of one of the
fields and therefore ensuring that the collapse can not occur.
Differential Revision: https://reviews.llvm.org/D28112
llvm-svn: 290896
This was originally motivated by a compile time problem I've since figured out how to solve differently, but the cleanup seemed useful. We had the same logic - which essentially implemented find - in several places. By commoning them out, I can implement find and allow erase to be inlined at the call sites if profitable.
Differential Revision: https://reviews.llvm.org/D28183
llvm-svn: 290779
Summary:
This class is unnecessary.
Its comment indicated that it was a compile error to allocate an
instance of a class that inherits from RefCountedBaseVPTR on the stack.
This may have been true at one point, but it's not today.
Moreover you really do not want to allocate *any* refcounted object on
the stack, vptrs or not, so if we did have a way to prevent these
objects from being stack-allocated, we'd want to apply it to regular
RefCountedBase too, obviating the need for a separate RefCountedBaseVPTR
class.
It seems that the main way RefCountedBaseVPTR provides safety is by
making its subclass's destructor virtual. This may have been helpful at
one point, but these days clang will emit an error if you define a class
with virtual functions that inherits from RefCountedBase but doesn't
have a virtual destructor.
Reviewers: compnerd, dblaikie
Subscribers: cfe-commits, klimek, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D28162
llvm-svn: 290717
GlobPattern is a class to handle glob pattern matching. Currently
only LLD is using that, but technically that feature is not specific
to linkers, so in this patch I move that file to LLVM.
Differential Revision: https://reviews.llvm.org/D27969
llvm-svn: 290212
This patch fixes the linkage for __crashtracer_info__, making it have the proper mangling (extern "C") and linkage (private extern).
It also adds a new PrettyStackTrace type, allowing LLDB to adopt this instead of Host::SetCrashDescriptionWithFormat().
Without this patch, CrashTracer on macOS won't pick up pretty stack traces from any LLVM client.
An LLDB commit adopting this API will follow shortly.
Differential Revision: https://reviews.llvm.org/D27683
llvm-svn: 289689
At least the plugin used by the LibreOffice build
(<https://wiki.documentfoundation.org/Development/Clang_plugins>) indirectly
uses those members (through inline functions in LLVM/Clang include files in turn
using them), but they are not exported by utils/extract_symbols.py on Windows,
and accessing data across DLL/EXE boundaries on Windows is generally
problematic.
Differential Revision: https://reviews.llvm.org/D26671
llvm-svn: 289647
Summary:
The motivation is to support better the -object_path_lto option on
Darwin. The linker needs to write down the generate object files on
disk for later use by lldb or dsymutil (debug info are not present
in the final binary). We're moving this into libLTO so that we can
be smarter when a cache is enabled and hard-link when possible
instead of duplicating the files.
Reviewers: tejohnson, deadalnix, pcc
Subscribers: dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D27507
llvm-svn: 289631
Bots are broken and needs to be fixed before having this on by default.
The feature was committed in r289619.
I tried to disable it in r289624 and failed because it was initialized in two places.
llvm-svn: 289626
Summary:
Given a flag (-mllvm -reverse-iterate) this patch will enable iteration of SmallPtrSet in reverse order.
The idea is to compile the same source with and without this flag and expect the code to not change.
If there is a difference in codegen then it would mean that the codegen is sensitive to the iteration order of SmallPtrSet.
This is enabled only with LLVM_ENABLE_ABI_BREAKING_CHECKS.
Reviewers: chandlerc, dexonsmith, mehdi_amini
Subscribers: mgorny, emaste, llvm-commits
Differential Revision: https://reviews.llvm.org/D26718
llvm-svn: 289619
Summary:
I looked at libgcc's implementation (which is based on the paper,
Software for Doubled-Precision Floating-Point Computations", by Seppo Linnainmaa,
ACM TOMS vol 7 no 3, September 1981, pages 272-283.) and made it generic to
arbitrary IEEE floats.
Differential Revision: https://reviews.llvm.org/D26817
llvm-svn: 289472
iteration.
Instead, load the byte at the needle length, compare it directly, and
save it to use in the lookup table of lengths we can skip forward.
I also added an annotation to expect that the comparison fails so that
the loop gets laid out contiguously without the call to memcpy (and the
substantial register shuffling that the ABI requires of that call).
Finally, because this behaves especially badly with a needle length of
one (by calling memcmp with a zero length) special case that to directly
call memchr, which is what we should have been doing anyways.
This was motivated by the fact that there are a large number of test
cases in 'check-llvm' where FileCheck's performance is dominated by
calls to StringRef::find (in a release, no-asserts build). I'm working
on patches to generally improve matters there, but this alone was worth
a 12.5% improvement in one test case where FileCheck spent 92% of its
time in this routine.
I experimented a bunch with different minor variations on this theme,
for example setting the pointer *at* the last byte and indexing
backwards for the call to memcmp. That didn't improve anything on this
version and seemed more complex. I also tried other things to make the
loop flow more nicely and none worked. =/ It is a bit unfortunate, the
generated code here remains pretty gross, but I don't see any obvious
ways to improve it. At this point, most of my ideas would be really
elaborate:
1) While the remainder of the string is long enough, we could load
a 16-byte or 32-byte vector at the address of the last byte and use
palignr to rotate that and check the first 15- or 31-bytes at the
front of the next segment, essentially pre-loading the first several
bytes of the next iteration so we could quickly detect a mismatch in
those bytes without an additional memory access. Down side would be
the code complexity, having a fallback loop, and likely misaligned
vector load. Plus it would make the common case of the last byte not
matching somewhat slower (need some extraction from a vector).
2) While we have space, we could do an aligned load of a 16- or 32-byte
vector that *contains* the end byte, and use any peceding bytes to
have a more precise "no" test, and any subsequent bytes could be
saved for the next iteration. This remove any unaligned load penalty,
but still requires us to pay the overhead of vector extraction for
the cases where we didn't need to do anything other than load and
compare the last byte.
3) Try to walk from the last byte in a way that is more friendly to
cache and/or memory pre-fetcher considering we have to poke the last
byte anyways.
No idea if any of these are really worth pursuing though. They all seem
somewhat unlikely to yield big wins in practice and to be a lot of work
and complexity. So I settled here, which at least seems like a strict
improvement over the previous version.
llvm-svn: 289373
so we can stop using DW_OP_bit_piece with the wrong semantics.
The entire back story can be found here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20161114/405934.html
The gist is that in LLVM we've been misinterpreting DW_OP_bit_piece's
offset field to mean the offset into the source variable rather than
the offset into the location at the top the DWARF expression stack. In
order to be able to fix this in a subsequent patch, this patch
introduces a dedicated DW_OP_LLVM_fragment operation with the
semantics that we used to apply to DW_OP_bit_piece, which is what we
actually need while inside of LLVM. This patch is complete with a
bitcode upgrade for expressions using the old format. It does not yet
fix the DWARF backend to use DW_OP_bit_piece correctly.
Implementation note: We discussed several options for implementing
this, including reserving a dedicated field in DIExpression for the
fragment size and offset, but using an custom operator at the end of
the expression works just fine and is more efficient because we then
only pay for it when we need it.
Differential Revision: https://reviews.llvm.org/D27361
rdar://problem/29335809
llvm-svn: 288683
Summary:
This is a follow up to r288303, where I have introduced TrigramIndex
to speed up SpecialCaseList for the cases when all rules are
simple wildcards, like *hello*wor.d*.
Here, I add support for escaping, so that it's possible to
specify rules like *c\+\+abi*.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27318
llvm-svn: 288553
Summary:
it's often the case when the rules in the SpecialCaseList
are of the form hel.o*bar. That gives us a chance to build
trigram index to quickly discard 99% of inputs without
running a full regex. A similar idea was used in Google Code Search
as described in the blog post:
https://swtch.com/~rsc/regexp/regexp4.html
The check is defeated, if there's at least one regex
more complicated than that. In this case, all inputs
will go through the regex. That said, the real-world
rules are often simple or can be simplied. That considerably
speeds up compiling Chromium with CFI and UBSan.
As measured on Chromium's content_message_generator.cc:
before, CFI: 44 s
after, CFI: 23 s
after, CFI, no blacklist: 23 s (~1% slower, but 3 runs were unable to show the difference)
after, regular compilation to bitcode: 23 s
Reviewers: pcc
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D27188
llvm-svn: 288303
This is the first part of an effort to add wasm binary
support across all llvm tools.
Patch by Sam Clegg
Differential Revision: https://reviews.llvm.org/D26172
llvm-svn: 288251
Summary:
The usage was previously guarded by HAVE_DLFCN. This breaks on Android with
LLVM_BUILD_STATIC as the platform does not provide a static version of libdl.
Using HAVE_DLOPEN fixes it as the code will only get used if we are actually able
to link an executable using dlopen.
Reviewers: rafael, beanz
Subscribers: tberghammer, danalbert, llvm-commits
Differential Revision: https://reviews.llvm.org/D26504
llvm-svn: 288246
The macro LLVM_ENABLE_ABI_BREAKING_CHECKS is moved to a new header
abi-breaking.h, from llvm-config.h. Only headers that are using the
macro are including this new header.
LLVM will define a symbol, either EnableABIBreakingChecks or
DisableABIBreakingChecks depending on the configuration setting for
LLVM_ABI_BREAKING_CHECKS.
The abi-breaking.h header will add weak references to these symbols in
every clients that includes this header. This should ensure that
a mismatch triggers a link failure (or a load time failure for DSO).
On MSVC, the pragma "detect_mismatch" is used instead.
Differential Revision: https://reviews.llvm.org/D26876
llvm-svn: 288082
Some scanner errors were not checked and reported by the parser.
Fix PR30934. Recommit r288014 after fixing unittest.
Patch by: Serge Guelton <serge.guelton@telecom-bretagne.eu>
Differential Revision: https://reviews.llvm.org/D26419
llvm-svn: 288071
Some scanner errors were not checked and reported by the parser.
Fix PR30934
Patch by: Serge Guelton <serge.guelton@telecom-bretagne.eu>
Differential Revision: https://reviews.llvm.org/D26419
llvm-svn: 288014
This reverts commit r287684
Objections on the review thread had not been addressed to
prior to commit. I asked the committer to revert, but i expect they
are gone for the US holiday or something.
llvm-svn: 287798
In many sitautions, you just want to compute a hash for one chunk
of data. This patch adds convenient functions for that purpose.
Differential Revision: https://reviews.llvm.org/D26988
llvm-svn: 287726
If a response file in construct `@file` was specified by relative name,
constructs `@file` nested within it were resolved incorrectly if the
flag RelativeNames in call to ExpandResponseFile was set to true.
This feature is used in configuration files, tests for it are in
respective change (see D24933).
llvm-svn: 287482
Kristof Beyls