- Currently, the "." (Dot) character, when not identifying an Identifier or a Constant, refers to the current PC (Program Counter)
- However, in z/OS, for the HLASM dialect, it strictly accepts only the "*" as the current PC (Support for this will be put up in a follow-up patch)
- The changes in this patch allow individual platforms to choose whether they would like to use the "." (Dot) character as a marker for the current PC or not.
- It is achieved by introducing a new field in MCAsmInfo.h called `DotIsPC` (similar to `DollarIsPC`)
Reviewed By: abhina.sreeskantharajan
Differential Revision: https://reviews.llvm.org/D100975
This patch adds section support in the OpenMP IRBuilder module, along with a test for the same.
Reviewed By: fghanim
Differential Revision: https://reviews.llvm.org/D89671
As suggested in D99294, this adds a getVPSingleValue helper to use for
recipes that are guaranteed to define a single value. This replaces uses
of getVPValue() which used to default to I = 0.
verifyFunctionAttrs has a comment that the value V is printed in error messages. The recently added errors for attributes didn't print V. Make them print V.
Change the stringification of AttributeList. Firstly they started with 'PAL[' which stood for ParamAttrsList. Change that to 'AttributeList[' matching its current name AttributeList. Print out semantic meaning of the index instead of the raw index value (i.e. 'return', 'function' or 'arg(n)').
Differential revision: https://reviews.llvm.org/D101484
- Previously, https://reviews.llvm.org/D99889 changed the framework in the AsmLexer to treat special tokens, if they occur at the start of the string, as Identifiers.
- These are used by the MASM Parser implementation in LLVM, and we can extend some of the changes made in the previous patch to SystemZ.
- In SystemZ, the special "tokens" referred to here are "_", "$", "@", "#". [_|$|@|#] are already supported as "part" of an Identifier.
- The changes in this patch ensure that these special tokens, when they occur at the start of the Identifier, are treated as Identifiers.
Reviewed By: abhina.sreeskantharajan
Differential Revision: https://reviews.llvm.org/D100959
As a follow on to D96282, since bug point passes is built as a module the proper file extension to use is LLVM_PLUGIN_EXT, rather than SHLIBEXT. Using SHLIBEXT causes the tests to load a non-existent file on AIX. We also adjust the PluginsTest unittest to use LLVM_PLUGIN_EXT for similar reasons.
This change should hopefully make little difference to other platforms, since generally `SHLIBEXT=LTDL_SHLIB_EXT=CMAKE_SHARED_LIBRARY_SUFFIX` and `LLVM_PLUGIN_EXT=CMAKE_SHARED_LIBRARY_SUFFIX` on every platform except AIX.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D101412
This utility allows more efficient start of pattern match.
Often MachineInstr(MI) is available and instead of using
mi_match(MI.getOperand(0).getReg(), MRI, ...) followed by
MRI.getVRegDef(Reg) that gives back MI we now use
mi_match(MI, MRI, ...).
Differential Revision: https://reviews.llvm.org/D99735
The https://lab.llvm.org/buildbot/#/builders/107 builder is failing on this
testcase, but doesn't produce a helpful error message yet. Disabling for now
until I have time to dig in further.
This reapplies 8740360093, which was reverted in bbddadd46e due to buildbot
errors.
This version checks that a JIT instance can be safely constructed, skipping
tests if it can not be. To enable this it introduces new C API to retrieve and
set the target triple for a JITTargetMachineBuilder.
When iterating over const blocks, the base type in the lambdas needs
to use const VPBlockBase *, otherwise it cannot be used with input
iterators over const VPBlockBase.
Also adjust the type of the input iterator range to const &, as it
does not take ownership of the input range.
This patch adds a blocksOnly helpers which take an iterator range
over VPBlockBase * or const VPBlockBase * and returns an interator
range that only include BlockTy blocks. The accesses are casted to
BlockTy.
Reviewed By: a.elovikov
Differential Revision: https://reviews.llvm.org/D101093
The StringView::substr now accepts a substring starting position and its
length instead of previous non-standard `from` & `to` positions.
All uses of two argument StringView::substr are in MicrosoftDemangler
and have 0 as a starting position, so no changes are necessary.
This also fixes a bug where attempting to extract a suffix with substr
(a `to` position equal to size) would return a substring without the
last character.
Fixing the issue should not introduce observable changes in the
demangler, since as currently used, a second argument to
StringView::substr is either: 1) a result of a successful call to
StringView::find and so necessarily smaller than size., or 2) in the
case of Demangler::demangleCharLiteral potentially equal to size, but
with demangler expecting more data to follow later on and failing either
way.
Reviewed By: #libc_abi, ldionne, erik.pilkington
Differential Revision: https://reviews.llvm.org/D100246
This patch adds a new iterator to traverse through VPRegionBlocks and a
GraphTraits specialization using the iterator to traverse through
VPRegionBlocks.
Because there is already a GraphTraits specialization for VPBlockBase *
and co, a new VPBlockRecursiveTraversalWrapper helper is introduced.
This allows us to provide a new GraphTraits specialization for that
type. Users can use the new recursive traversal by using this wrapper.
The graph trait visits both the entry block of a region, as well as all
its successors. Exit blocks of a region implicitly have their parent
region's successors. This ensures all blocks in a region are visited
before any blocks in a successor region when doing a reverse post-order
traversal of the graph.
Reviewed By: a.elovikov
Differential Revision: https://reviews.llvm.org/D100175
ConstantFoldingMIRBuilder was an experiment which is not used for
anything. The constant folding functionality is now part of
CSEMIRBuilder.
Differential Revision: https://reviews.llvm.org/D101050
In quite a few cases in LoopVectorize.cpp we call createStepForVF
with a step value of 0, which leads to unnecessary generation of
llvm.vscale intrinsic calls. I've optimised IRBuilder::CreateVScale
and createStepForVF to return 0 when attempting to multiply
vscale by 0.
Differential Revision: https://reviews.llvm.org/D100763
- Previously, https://reviews.llvm.org/D72680 introduced a new attribute called `AllowSymbolAtNameStart` (in relation to the MAsmParser changes) in `MCAsmInfo.h` which (according to the comment in the header) allows the following behaviour:
```
/// This is true if the assembler allows $ @ ? characters at the start of
/// symbol names. Defaults to false.
```
- However, the usage of this field in AsmLexer.cpp doesn't seem completely accurate* for a couple of reasons.
```
default:
if (MAI.doesAllowSymbolAtNameStart()) {
// Handle Microsoft-style identifier: [a-zA-Z_$.@?][a-zA-Z0-9_$.@#?]*
if (!isDigit(CurChar) &&
isIdentifierChar(CurChar, MAI.doesAllowAtInName(),
AllowHashInIdentifier))
return LexIdentifier();
}
```
1. The Dollar and At tokens, when occurring at the start of the string, are treated as separate tokens (AsmToken::Dollar and AsmToken::At respectively) and not lexed as an Identifier.
2. I'm not too sure why `MAI.doesAllowAtInName()` is used when `AllowAtInIdentifier` could be used. For X86 platforms, afaict, this shouldn't be an issue, since the `CommentString` attribute isn't "@". (alternatively the call to the setter can be set anywhere else as needed). The `AllowAtInName` does have an additional important meaning, but in the context of AsmLexer, shouldn't mean anything different compared to `AllowAtInIdentifier`
My proposal is the following:
- Introduce 3 new fields called `AllowQuestionTokenAtStartOfString`, `AllowDollarTokenAtStartOfString` and `AllowAtTokenAtStartOfString` in MCAsmInfo.h which will encapsulate the previously documented behaviour of "allowing $, @, ? characters at the start of symbol names")
- Introduce these fields where "$", "@" are lexed, and treat them as identifiers depending on whether `Allow[Dollar|At]TokenAtStartOfString` is set.
- For the sole case of "?", append it to the existing logic for treating a "default" token as an Identifier.
z/OS (HLASM) will also make use of some of these fields in follow up patches.
completely accurate* - This was based on the comments and the intended behaviour the code. I might have completely misinterpreted it, and if that is the case my sincere apologies. We can close this patch if necessary, if there are no changes to be made :)
Depends on https://reviews.llvm.org/D99374
Reviewed By: Jonathan.Crowther
Differential Revision: https://reviews.llvm.org/D99889
CommandLine.h is indirectly included in ~50% of TUs when building
clang, and VirtualFileSystem.h is large.
(Already remarked by jhenderson on D70769.)
No behavior change.
Differential Revision: https://reviews.llvm.org/D100957
If you gave clang the options `--target=arm-pc-windows-msvc` and
`-march=armv8-a+crypto` together, the crypto extension would not be
enabled in the compilation, and you'd see the following warning
message suggesting that the 'armv8-a' had been ignored:
clang: warning: ignoring extension 'crypto' because the 'armv7-a' architecture does not support it [-Winvalid-command-line-argument]
This happens because Triple::getARMCPUForArch(), for the Win32 OS,
unconditionally returns "cortex-a9" (an Armv7 CPU) regardless of
MArch, which overrides the architecture setting on the command line.
I don't think that the combination of Windows and AArch32 _should_
unconditionally outlaw the use of the crypto extension. MSVC itself
doesn't think so: you can perfectly well compile Thumb crypto code
using its AArch32-targeted compiler.
All the other default CPUs in the same switch statement are
conditional on a particular MArch setting; this is the only one that
returns a particular CPU _regardless_ of MArch. So I've fixed this one
by adding a condition, so that if you ask for an architecture *above*
v7, the default of Cortex-A9 no longer overrides it.
Reviewed By: mstorsjo
Differential Revision: https://reviews.llvm.org/D100937
apple-m1 has the same level of ISA support as apple-a14,
so this is a straightforward mechanical change. However, that
also means this inherits apple-a14's v8.5a+nobti quirkiness.
rdar://68287159
Currently a CHECK-NOT directive succeeds whenever the corresponding
match fails. However match can fail due to an error rather than a lack
of match, for instance if a variable is undefined. This commit makes match
error a failure for CHECK-NOT.
Reviewed By: jdenny
Differential Revision: https://reviews.llvm.org/D86222
Value::replaceUsesOutsideBlock doesn't replace debug uses which leads to an
unnecessary reduction in variable location coverage. Fix this, add a unittest for
it, and add a regression test demonstrating the change through instcombine's
replacedSelectWithOperand.
Reviewed By: djtodoro
Differential Revision: https://reviews.llvm.org/D99169
This fixes https://reviews.llvm.org/D93990#2666922
by teaching `m_Undef` to match vectors/aggrs with poison elements.
As suggested, fixes in InstCombine files to use the `m_Undef` matcher instead
of `isa<UndefValue>` will be followed.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D100122
At the moment, ReversePostOrderTraversal performs a post-order walk on
the entry node of the passed in graph, rather than the graph type
itself.
If GT::NodeRef is the same as GraphT, everything works as expected and
this is the case for the current uses in-tree. But it does not work as
expected if GraphT != GT::NodeRef. In that case, we either fail to build
(if there is no GraphTrait specialization for GT:NodeRef) or we pick the
GraphTrait specialization for GT::NodeRef, instead of the specialization
of GraphT.
Both the depth-first and post-order iterators pick the expected
specalization and this patch updates ReversePostOrderTraversal to
delegate to po_begin & po_end to pick the right specialization, rather
than forcing using GraphTraits<GT::NodeRef>, by first getting the entry
node.
This makes `ReversePostOrderTraversal<Graph<6>> RPOT(G);` build and
work as expected in the test.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D100169
Attributes don't know their parent Context, adding this would make Attribute larger. Instead, we add hasParentContext that answers whether this Attribute belongs to a particular LLVMContext by checking for itself inside the context's FoldingSet. Same with AttributeSet and AttributeList. The Verifier checks them with the Module context.
Differential Revision: https://reviews.llvm.org/D99362
The implementation supports static schedule for Fortran do loops. This
implements the dynamic variant of the same concept.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D97393
This allows for walking all nested locations of a given location, and is generally useful when processing locations.
Differential Revision: https://reviews.llvm.org/D100437
Value::replaceUsesOutsideBlock doesn't replace debug uses which leads to an
unnecessary reduction in variable location coverage. Fix this, add a unittest for
it, and add a regression test demonstrating the change through instcombine's
replacedSelectWithOperand.
Reviewed By: djtodoro
Differential Revision: https://reviews.llvm.org/D99169
Add an initial version of a helper to determine whether a recipe may
have side-effects.
Reviewed By: a.elovikov
Differential Revision: https://reviews.llvm.org/D100259
When DIE is extracted manually, the DieArray is empty. When dump is invoked on aforementioned DIE it tries to extract child, even if Dump options say otherwise. Resulting in crash.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D99698
- Add support for HLASM style integers. These are the decimal integers [0-9].
- HLASM does not support the additional prefixed integers like, `0b`, `0x`, octal integers and Masm style integers.
- To achieve this, a field `LexHLASMStyleIntegers` (similar to the `LexMasmStyleIntegers` field) is introduced in `MCAsmLexer.h` as well as a corresponding setter.
Note: This field could also go into MCAsmInfo.h. I used the previous precedent set by the `LexMasmIntegers` field.
Depends on https://reviews.llvm.org/D99286
Reviewed By: epastor
Differential Revision: https://reviews.llvm.org/D99374
- Currently, MCAsmInfo provides a CommentString attribute, that various targets can set, so that the AsmLexer can appropriately lex a string as a comment based on the set value of the attribute.
- However, AsmLexer also supports a few additional comment syntaxes, in addition to what's specified as a CommentString attribute. This includes regular C-style block comments (/* ... */), regular C-style line comments (// .... ) and #. While I'm not sure as to why this behaviour exists, I am assuming it does to maintain backward compatibility with GNU AS (see https://sourceware.org/binutils/docs/as/Comments.html#Comments for reference)
For example:
Consider a target which sets the CommentString attribute to '*'.
The following strings are all lexed as comments.
```
"# abc" -> comment
"// abc" -> comment
"/* abc */ -> comment
"* abc" -> comment
```
- In HLASM however, only "*" is accepted as a comment string, and nothing else.
- To achieve this, an additional attribute (`AllowAdditionalComments`) has been added to MCAsmInfo. If this attribute is set to false, then only the string specified by the CommentString attribute is used as a possible comment string to be lexed by the AsmLexer. The regular C-style block comments, line comments and "#" are disabled. As a final note, "#" will still be treated as a comment, if the CommentString attribute is set to "#".
Depends on https://reviews.llvm.org/D99277
Reviewed By: abhina.sreeskantharajan, myiwanch
Differential Revision: https://reviews.llvm.org/D99286
"Does the predicate hold between two ranges?"
Not very surprisingly, some places were already doing this check,
without explicitly naming the algorithm, cleanup them all.
Fangrui Song