An empty livein block doesn't make much sense (why not just omit it?)
but they're legal and some tests have them, so its best to handle it.
llvm-svn: 316089
Matching prefixes isn't good enough, because it leads to things like
calling the first constant C3 just because there were two copies
before it. Tighten up the check to match more precisely, but also be
careful about ambiguity when dealing with target opcodes that end in a
number.
llvm-svn: 316088
This adds update_mir_test_checks, which updates the check lines in mir
tests. This can only update tests that start and end with .mir
currently (ie, -run-pass) but it should be sufficient for updating at
least some of the GlobalISel tests.
llvm-svn: 316057
The new scheme should match the normalization of embedded paths in
linkrepro tar files.
Differential Revision: https://reviews.llvm.org/D39023
llvm-svn: 316044
MSVC doesn't seem to like implicitly instantiating addPredicate and then
explicitly specializing it later. It causes an internal compiler error.
llvm-svn: 315930
Summary:
iPTR is a pointer of subtarget-specific size to any address space. Therefore
type checks on this size derive the SizeInBits from a subtarget hook.
At this point, we can import the simplests G_LOAD rules and select load
instructions using them. Further patches will support for the predicates to
enable additional loads as well as the stores.
The previous commit failed on MSVC due to a failure to convert an
initializer_list to a std::vector. Hopefully, MSVC will accept this version.
Depends on D37457
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: kristof.beyls, javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37458
llvm-svn: 315887
Summary:
iPTR is a pointer of subtarget-specific size to any address space. Therefore
type checks on this size derive the SizeInBits from a subtarget hook.
At this point, we can import the simplests G_LOAD rules and select load
instructions using them. Further patches will support for the predicates to
enable additional loads as well as the stores.
Depends on D37457
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: kristof.beyls, javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37458
llvm-svn: 315885
Summary:
This includes some context-sensitivity in the MVT to LLT conversion so that
pointer types are tested correctly.
FIXME: I'm not happy with the way this is done since everything is a
special-case. I've yet to find a reasonable way to implement it.
select-load.mir fails because <1 x s64> loads in tablegen get priority over s64
loads. This is fixed in the next patch and as such they should be committed
together, I've posted them separately to help with the review.
Depends on D37456
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Subscribers: kristof.beyls, javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37457
llvm-svn: 315884
Summary:
It's possible for a ComplexPattern to be used as an operator in a match
pattern. This is used by the load/store patterns in AArch64 to name the
suboperands returned by ComplexPattern predicate so that they can be broken
apart and referenced independently in the result pattern.
This patch adds support for this in order to enable the import of load/store
patterns.
Depends on D37445
Hopefully fixed the ambiguous constructor that a large number of bots reported.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D37456
llvm-svn: 315869
Summary:
It's possible for a ComplexPattern to be used as an operator in a match
pattern. This is used by the load/store patterns in AArch64 to name the
suboperands returned by ComplexPattern predicate so that they can be broken
apart and referenced independently in the result pattern.
This patch adds support for this in order to enable the import of load/store
patterns.
Depends on D37445
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D37456
llvm-svn: 315863
In type inference, an empty type set for a specific hw mode is not an
error. In earlier stages of the design it was, but having to use non-
parameterized types with target intrinsics necessarily led to type
contradictions: since the intrinsics used specific types, they were
only valid for a specific hw mode, and the resulting type set for other
modes ended up empty. To accommodate the existence of such intrinsics
individual type sets were allowed to be empty as long as not all sets
were empty.
llvm-svn: 315858
Summary:
There is an important mismatch between ISD::LOAD and G_LOAD (and likewise for
ISD::STORE and G_STORE). In SelectionDAG, ISD::LOAD is a non-atomic load
and atomic loads are handled by a separate node. However, this is not true of
GlobalISel's G_LOAD. For G_LOAD, the MachineMemOperand indicates the atomicity
of the operation. As a result, this mapping must also add a predicate that
checks for non-atomic MachineMemOperands.
This is NFC since these nodes always have predicates in practice and are
therefore always rejected at the moment.
Depends on D37443
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37445
llvm-svn: 315843
Summary:
GlobalISel and SelectionDAG require different code for the common
load/store predicates due to differences in the representation.
For example:
SelectionDAG: (load<signext,i8>:i32 GPR32:$addr) // The <> denote properties of the SDNode that are not printed in the DAG
GlobalISel: (G_SEXT:s32 (G_LOAD:s8 GPR32:$addr))
Even without that, differences in the IR (SDNode vs MachineInstr) require
differences in the C++ predicate.
This patch moves the implementation of the common load/store predicates
into tablegen so that it can handle these differences.
It's NFC for SelectionDAG since it emits equivalent code and it's NFC for
GlobalISel since the rules involving the relevant predicates are still
rejected by the importer.
Depends on D36618
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Subscribers: llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37443
Includes a partial revert of r315826 since this patch makes it necessary for
getPredCode() to return a std::string and getImmCode() should have the same
interface as getPredCode().
llvm-svn: 315841
"No such file or directory: C:\\...\\tests\\Output\\shared-output.py.tmp/Output/Shared/SHARED.tmp"
And yet other forward-slashes don't seem to be causing the same
problem. I'll see if I can get ahold of a Windows machine to poke at
this directly later.
llvm-svn: 315792
Summary:
Operand variable lookups are now performed by the RuleMatcher rather than
searching the whole matcher hierarchy for a match. This revealed a wrong-code
bug that currently affects ARM and X86 where patterns that use a variable more
than once in the match pattern will be imported but won't check that the
operands are identical. This can cause the tablegen-erated matcher to
accept matches that should be rejected.
Depends on D36569
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: aemerson, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36618
llvm-svn: 315780
Summary:
There's only a tablegen testcase for IntImmLeaf and not a CodeGen one
because the relevant rules are rejected for other reasons at the moment.
On AArch64, it's because there's an SDNodeXForm attached to the operand.
On X86, it's because the rule either emits multiple instructions or has
another predicate using PatFrag which cannot easily be supported at the
same time.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36569
llvm-svn: 315761
Summary:
The purpose of this patch is to expose more information about ImmLeaf-like
PatLeaf's so that GlobalISel can learn to import them. Previously, ImmLeaf
could only be used to test int64_t's produced by sign-extending an APInt.
Other tests on immediates had to use the generic PatLeaf and extract the
constant using C++.
With this patch, tablegen will know how to generate predicates for APInt,
and APFloat. This will allow it to 'do the right thing' for both SelectionDAG
and GlobalISel which require different methods of extracting the immediate
from the IR.
This is NFC for SelectionDAG since the new code is equivalent to the
previous code. It's also NFC for FastISel because FastIselShouldIgnore is 1
for the ImmLeaf subclasses. Enabling FastIselShouldIgnore == 0 for these new
subclasses will require a significant re-factor of FastISel.
For GlobalISel, it's currently NFC because the relevant code to import the
affected rules is not yet present. This will be added in a later patch.
Depends on D36086
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: bjope, aemerson, rengolin, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36534
llvm-svn: 315747
I'm about to commit a patch that makes them necessary for getPredCode() and
it would be strange for getPredCode() and getImmCode() to require different
usage.
llvm-svn: 315733
This refers to a temporary path that can be shared across all tests,
identified by a particular label. This can be used for things like
caches.
At the moment, the character set for the LABEL is limited to C
identifier characters, plus '-', '+', '=', and '.'. This is the same
set of characters currently allowed in REQUIRES clause identifiers.
llvm-svn: 315697
This paves the way for other projects which might /use/ clang or
lld but not necessarily need to the full set of functionality
available to clang and lld tests to be able to have a basic set
of substitutions that allow a project to run the clang or lld
executables.
llvm-svn: 315627
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
This reverts commit 4e4ee1c507e2707bb3c208e1e1b6551c3015cbf5.
This is failing due to some code that isn't built on MSVC
so I didn't catch. Not immediately obvious how to fix this
at first glance, so I'm reverting for now.
llvm-svn: 315536
There's a lot of misuse of Twine scattered around LLVM. This
ranges in severity from benign (returning a Twine from a function
by value that is just a string literal) to pretty sketchy (storing
a Twine by value in a class). While there are some uses for
copying Twines, most of the very compelling ones are confined
to the Twine class implementation itself, and other uses are
either dubious or easily worked around.
This patch makes Twine's copy constructor private, and fixes up
all callsites.
Differential Revision: https://reviews.llvm.org/D38767
llvm-svn: 315530
This adds debug tracing to the table-generated assembly instruction matcher,
enabled by the -debug-only=asm-matcher option.
The changes in the target AsmParsers are to add an MCInstrInfo reference under
a consistent name, so that we can use it from table-generated code. This was
already being used this way for targets that use deprecation warnings, but 5
targets did not have it, and Hexagon had it under a different name to the other
backends.
llvm-svn: 315445
This allows a DiagnosticType and/or DiagnosticString to be associated
with a RegisterClass in tablegen, so that we can emit diagnostics in the
assembler when a register operand is incorrect.
DiagnosticType creates a predictable enum value, which gets returned as
the error code when an operand does not match, and can be used by the
assembly parser to map to a user-facing diagnostic. DiagnosticString
creates an anonymous enum value (currently based on the tablegen class
name), and a function to map from enum values to strings will be
generated. Both of these work the same was as they do for AsmOperand.
This isn't used by any targets yet, but has one (positive) side-effect.
It improves the diagnostic codes returned by validateOperandClass - we
always want to emit the diagnostic that relates to the expected operand
class, but this wasn't always being done when the expected and actual
classes were completely different (token/register/custom). This causes a
few AArch64 diagnostics to be improved, as Match_InvalidOperand was
being returned instead of a specific diagnostic type.
Differential revision: https://reviews.llvm.org/D36691
llvm-svn: 315295
It's rare but there are a small number of patterns like this:
(set i64:$dst, (add i64:$src1, i64:$src2))
These should be equivalent to register classes except they shouldn't check for
a specific register bank.
This doesn't occur in AArch64/ARM/X86 but does occasionally come up in other
in-tree targets such as BPF.
llvm-svn: 315226
After the original commit ([[ https://reviews.llvm.org/rL304088 | rL304088 ]]) was reverted, a discussion in llvm-dev was opened on 'how to accomplish this task'.
In the discussion we concluded that the best way to achieve our goal (which is to automate the folding tables and remove the manually maintained tables) is:
# Commit the tablegen backend disabled by default.
# Proceed with an incremental updating of the manual tables - while checking the validity of each added entry.
# Repeat previous step until we reach a state where the generated and the manual tables are identical. Then we can safely remove the manual tables and include the generated tables instead.
# Schedule periodical (1 week/2 weeks/1 month) runs of the pass:
- if changes appear (new entries):
- make sure the entries are legal
- If they are not, mark them as illegal to folding
- Commit the changes (if there are any).
CMake flag added for this purpose is "X86_GEN_FOLD_TABLES". Building with this flags will run the pass and emit the X86GenFoldTables.inc file under build/lib/Target/X86/ directory which is a good reference for any developer who wants to take part in the effort of completing the current folding tables.
Differential Revision: https://reviews.llvm.org/D38028
llvm-svn: 315173
The assertion tests were using count() instead of testing the find result, resulting in double the number of searches in debug/assert builds.
Instead, call find once (like the release builds do) and assert the result against end().
llvm-svn: 315151
Avoid unnecessary std::string creations in the TreePredicateFn getters and in CodeGenDAGPatterns::getSDNodeNamed
Differential Revision: https://reviews.llvm.org/D38624
llvm-svn: 315148
This addresses two sources of inconsistency in test configuration
files.
1. Substitution boundaries. Previously you would specify a
substitution, such as 'lli', and then additionally a set
of characters that should fail to match before and after
the tool. This was used, for example, so that matches that
are parts of full paths would not be replaced. But not all
tools did this, and those that did would often re-invent
the set of characters themselves, leading to inconsistency.
Now, every tool substitution defaults to using a sane set
of reasonable defaults and you have to explicitly opt out
of it. This actually fixed a few latent bugs that were
never being surfaced, but only on accident.
2. There was no standard way for the system to decide how to
locate a tool. Sometimes you have an explicit path, sometimes
we would search for it and build up a path ourselves, and
sometimes we would build up a full command line. Furthermore,
there was no standardized way to handle missing tools. Do we
warn, fail, ignore, etc? All of this is now encapsulated in
the ToolSubst class. You either specify an exact command to
run, or an instance of FindTool('<tool-name>') and everything
else just works. Furthermore, you can specify an action to
take if the tool cannot be resolved.
Differential Revision: https://reviews.llvm.org/D38565
llvm-svn: 315085
Summary:
normpath() was being called on an empty string and appended to
the environment variable in the case where the environment variable
was unset. This led to ":." being appended to the path, since
normpath() of an empty string is '.', presumably to represent cwd.
Reviewers: zturner, sqlbyme, modocache
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38542
llvm-svn: 314915
This adds a DiagnosticString member to the AsmOperand tablegen class, so
that the diagnostic text to be used when an assembly operand is
incorrect can be stored in the tablegen description of the operand,
rather than in a separate switch statement in the AsmParser.
If DiagnosticString is used for any operands, tablegen will emit a
getMatchKindDiag function, to map from diagnostic enums to strings.
Differential revision: https://reviews.llvm.org/D31606
llvm-svn: 314803
The current table-generated assembly instruction matcher returns a
64-bit error code when matching fails. Since multiple instruction
encodings with the same mnemonic can fail for different reasons, it uses
some heuristics to decide which message is important.
This heuristic does not work well for targets that have many encodings
with the same mnemonic but different operands, or which have different
versions of instructions controlled by subtarget features, as it is hard
to know which encoding the user was intending to use.
Instead of trying to improve the heuristic in the table-generated
matcher, this patch changes it to report a list of near-miss encodings.
This list contains an entry for each encoding with the correct mnemonic,
but with exactly one thing preventing it from being valid. This thing
could be a single invalid operand, a missing target feature or a failed
target-specific validation function.
The target-specific assembly parser can then report an error message
giving multiple options for instruction variants that the user may have
been trying to use. For example, I am working on a patch to use this for
ARM, which can give this error for an invalid instruction for ARMv6-M:
<stdin>:8:3: error: invalid instruction, multiple near-miss encodings found
adds r0, r1, #0x8
^
<stdin>:8:3: note: for one encoding: instruction requires: thumb2
adds r0, r1, #0x8
^
<stdin>:8:16: note: for one encoding: expected an integer in range [0, 7]
adds r0, r1, #0x8
^
<stdin>:8:16: note: for one encoding: expected a register in range [r0, r7]
adds r0, r1, #0x8
^
This also allows the target-specific assembly parser to apply its own
heuristics to suppress some errors. For example, the error "instruction
requires: arm-mode" is never going to be useful when targeting an
M-profile architecture (which does not have ARM mode).
This patch just adds the target-independent mechanism for doing this,
all targets still use the old mechanism. I've added a bit in the
AsmParser tablegen class to allow targets to switch to this new
mechanism. To use this, the target-specific assembly parser will have to
be modified for the change in signature of MatchInstructionImpl, and to
report errors based on the list of near-misses.
Differential revision: https://reviews.llvm.org/D27620
llvm-svn: 314774
Fix llvm_tools_dir attribute access not to fail when the variable is not
present. This directory is not really necessary to run lit tests,
and the code already accounts for it being None.
The reference was added in r313407, and it breaks the stand-alone lit
package in Gentoo.
Differential Revision: https://reviews.llvm.org/D38442
llvm-svn: 314620
Summary:
Also disables leak checking on lto tests, due to many leaks reported
in the system's ld64.
Reviewers: kcc, pcc, bogner, kubamracek
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D37781
llvm-svn: 314535
Also add operator<< for use with raw_ostream to InfoByHwMode and its
derived classes.
Recommitting r313989 with the fix for unresolved references: explicitly
define the operator<< in namespace llvm.
llvm-svn: 314004
Avoid unnecessary std::string creations during TypeSetByHwMode::writeToStream.
Found during investigations into PR28222
Differential Revision: https://reviews.llvm.org/D38174
llvm-svn: 313983
There were two issues, one Python 3 specific related to Unicode,
and another which is that the tool substitution for lld no longer
rejected matches where a / preceded the tool name.
llvm-svn: 313928
debuginfo-tests has need to reuse a lot of common configuration
from clang and lld, and in general it seems like all of the
projects which are tightly coupled (e.g. lld, clang, llvm, lldb,
etc) can benefit from knowing about one other. For example,
lldb needs to know various things about how to run clang in its
test suite. Since there's a lot of common substitutions and
operations that need to be shared among projects, sinking this
up into LLVM makes sense.
In addition, this patch introduces a function add_tool_substitution
which handles all the dirty intricacies of matching tool names
which was previously copied around the various config files. This
is now a simple straightforward interface which is hard to mess
up.
Differential Revision: https://reviews.llvm.org/D37944
llvm-svn: 313919
This has gone back and forth, but it seems this is necessary
after all. realpath is not sufficient because if you have a
file named 'C:\foo.txt', then both realpath('c:\foo.txt') and
realpath(C:\foo.txt') return the string that was passed to them
exactly as is, meaning the case of the drive-letter won't match.
The problem before was not that we were normalizing the case of
items going into the config map, but rather that we were
normalizing the case of something we needed to print. The value
that is used to key on the config map should never be printed.
llvm-svn: 313918
This makes all paths lowercase on Windows, which seemed like a
good idea at the time, but it means that tests can't properly
use FileCheck to match expected path names.
llvm-svn: 313889
Config map is not exposed through the command line, so testing this
is somewhat tricky. But basically we need a test that if a custom
driver builds a config map and passes it to main, it gets respected.
A config map allows config files in the source tree to be mapped
to alternate config files in the build tree. This particular test
works by having two config files in separate directories, and
setting up a config map to have that redirects A/lit.site.cfg
to B/altconfig. Then, we print a message in A/lit.site.cfg
and B/altconfig and check that we do see the output from B
but don't see the output from A. Additionally we test that
the test suite specified by A's config map is properly discovered.
Differential Revision: https://reviews.llvm.org/D38105
llvm-svn: 313887
Summary:
This appears to break some bots, when getToolsPath fails to find some or
all of the tools (for example, an incomplete GnuWin32 installation).
Reviewers: zturner, modocache
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D38115
llvm-svn: 313854
Many editors and Python-related diagnostics tools such as
debuggers break or fail in mysterious ways when python files
don't end in .py. This is especially true on Windows, but
still exists on other platforms. I don't want to be too heavy
handed in changing everything across the board, but I do want
to at least *allow* lit configs to have .py extensions. This
patch makes the discovery process first look for a config file
with a .py extension, and if one is not found, then looks for
a config file using the old method. So for existing users, there
should be no functional change.
Differential Revision: https://reviews.llvm.org/D37838
llvm-svn: 313849
This changes some STL data types to corresponding LLVM
data types that have better performance characteristics.
Differential Revision: https://reviews.llvm.org/D37957
llvm-svn: 313783
Bug pointed out by EricWF. This would construct a path where
items would be added in the wrong order, potentially leading
to using the wrong tools for testing.
llvm-svn: 313765
Many svn-based buildbots seem to be getting stuck continually
in tree conflicts due to the output of pyc files. I'm disabling
these as a temporary measure in an attempt to get everything
stable again.
I'll try to remove this code once I understand the problem
better.
llvm-svn: 313698
The generated DAG isel file currently makes use of formatted_raw_ostream primarily for generating a hierarchical representation while also skipping over the initial comment that contains the current index.
It was reported in D37957 that this formatting might be slow due to the need to keep track of column numbers by monitoring all the written data for new lines.
This patch attempts to rewrite the emitter to make use of simpler formatting mechanisms to generate a fairly similar output. The main difference is that the number in the index comment is now right justified and padded with spaces inside the comment. Previously we appended the spaces after the comment.
Differential Revision: https://reviews.llvm.org/D37966
llvm-svn: 313674
Add some member types to MachineValueTypeSet::const_iterator so that
iterator_traits can work with it.
Improve TableGen performance of -gen-dag-isel (motivated by X86 backend)
The introduction of parameterized register classes in r313271 caused the
matcher generation code in TableGen to run much slower, particularly so
in the unoptimized (debug) build. This patch recovers some of the lost
performance.
Summary of changes:
- Cache the set of legal types in TypeInfer::getLegalTypes. The contents
of this set do not change.
- Add LLVM_ATTRIBUTE_ALWAYS_INLINE to several small functions. Normally
this would not be necessary, but in the debug build TableGen is not
optimized, so this helps a little bit.
- Add an early exit from TypeSetByHwMode::operator== for the case when
one or both arguments are "simple", i.e. only have one mode. This
saves some time in GenerateVariants.
- Finally, replace the underlying storage type in TypeSetByHwMode::SetType
with MachineValueTypeSet based on std::array instead of std::set.
This significantly reduces the number of memory allocation calls.
I've done a number of experiments with the underlying type of InfoByHwMode.
The type is a map, and for targets that do not use the parameterization,
this map has only one entry. The best (unoptimized) performance, somewhat
surprisingly came from std::map, followed closely by std::unordered_map.
DenseMap was the slowest by a large margin.
Various hand-crafted solutions (emulating enough of the map interface
not to make sweeping changes to the users) did not yield any observable
improvements.
llvm-svn: 313660
The introduction of parameterized register classes in r313271 caused the
matcher generation code in TableGen to run much slower, particularly so
in the unoptimized (debug) build. This patch recovers some of the lost
performance.
Summary of changes:
- Cache the set of legal types in TypeInfer::getLegalTypes. The contents
of this set do not change.
- Add LLVM_ATTRIBUTE_ALWAYS_INLINE to several small functions. Normally
this would not be necessary, but in the debug build TableGen is not
optimized, so this helps a little bit.
- Add an early exit from TypeSetByHwMode::operator== for the case when
one or both arguments are "simple", i.e. only have one mode. This
saves some time in GenerateVariants.
- Finally, replace the underlying storage type in TypeSetByHwMode::SetType
with MachineValueTypeSet based on std::array instead of std::set.
This significantly reduces the number of memory allocation calls.
I've done a number of experiments with the underlying type of InfoByHwMode.
The type is a map, and for targets that do not use the parameterization,
this map has only one entry. The best (unoptimized) performance, somewhat
surprisingly came from std::map, followed closely by std::unordered_map.
DenseMap was the slowest by a large margin.
Various hand-crafted solutions (emulating enough of the map interface
not to make sweeping changes to the users) did not yield any observable
improvements.
llvm-svn: 313647
Since the path a user specifies to the llvm-lit script might be
different than the source tree they built from (since they could
be behind different symlinks), we need to use realpath to make
sure that path comparisons work as expected.
Even better would be to use a custom dictionary comparison with
actual file equivalence comparison semantics, but this is the
least friction to unbreak things for now.
llvm-svn: 313594
It doesn't make sense to me why these bots are failing as the
traceback does not agree with the source code. It's possible
something is stale or there is some other mysterious error,
but in any case hopefully this fixes it.
llvm-svn: 313469
Justin Bogner