Added tests and impl to make sure the following errors are reported:
* Notifying a created thread that we are already tracking.
* Notifying a thread death for a thread we don't know about.
llvm-svn: 218900
Now that ThreadStateCoordinator errors out on threads in unexpected states,
it has enough information to know which threads need stop requests fired
when we want to do a deferred callback on a thread's behalf. This change
adds a new method, CallAfterRunningThreadsStop(...), which no longer
takes a set of thread ids that require stop requests. It's much harder
to misuse this method and (with newer error logic) it's harder to
correctly use the original method. Expect the original method that takes
the set of thread ids to stop to disappear in the near future.
Adds several tests for CallAfterRunningThreadsStop().
llvm-svn: 218897
Added tests to verify that the coordinator signals an error if
the given thread to resume is unknown, and if the thread is through to
be running already.
Modified resume handling code to match tests.
llvm-svn: 218872
updating its ivars. We've had a lot of crash reports and careful
analysis shows that we've got multiple threads operating on the
same StackFrame objects, changing their m_sc and m_flags ivars.
<rdar://problem/18406111>
llvm-svn: 218845
ThreadStateCoordinator changes:
* Most commands that run in the queue now take an error handler that
will be called with an error string if an error occurs during processing.
Errors generally stop the operation in progress. The errors are checked
at time of execution. This is intended to help flush out ptrace/waitpid/state management
issues as quickly as possible.
* Threads now must be known to the coordinator before stops can be reported,
resumes can be requested, thread deaths can be reported, or deferred stop
notifications can be made. Failure to know the thread will cause the coordinator
to call the error callback for the event being processed. Threads are introduced
to the system by the NotifyThreadCreate method.
* The NotifyThreadCreate method now takes the initial state of the thread being
introduces to the system. We no longer just assume the thread is running.
The test cases were cleaned up, too:
* A gtest test fixture is now used, which allows creating less verbose helper
methods that setup common pieces of callback code for some method invocations.
Net result: the tests are simpler to read and shorter to write.
llvm-svn: 218833
CMake build of any part of LLVM with LLDB checked out fails immediately.
=[
We appear to not even have a build bot covering the CMake build of LLDB
which makes this truly terrible. That needs to be fixed immediately.
llvm-svn: 218831
ThreadIDFunc => ThreadIDFunction
LogFunc => LogIDFunction
We try to avoid abbreviations/shortened names. Adjusted function parameter names
as well to replace _func with _function.
llvm-svn: 218773
r218568 added an explicit #include of the Linux ProcessMonitor.h to
POSIXThread.cpp, rather than including just "ProcessMonitor.h" and
relying on the build infrastructure for the appropriate paths.
For now add #ifdefs in the source to use the FreeBSD or Linux header
as appropriate; a cleaner fix (and perhaps some refactoring of the
POSIX classes) should still be done later.
llvm-svn: 218762
There is a state transition that seems potentially buggy that I am capturing and
logging here, and including an explicit test to demonstrate expected behavior. See new test
for detailed description. Added logging around this area since, if we hit it, we
may have a usage bug, or a new state transition we really need to investigate.
This is around this scenario:
Thread C deferred stop notification awaiting thread A and thread B to stop.
Thread A stops.
Thread A requests resume.
Thread B stops.
Here we will explicitly signal the deferred stop notification after thread B
stops even though thread A is now resumed. Copious logging happens here.
llvm-svn: 218683
the user level. It adds the ability to invent new stepping modes implemented by python classes,
and to view the current thread plan stack and to some extent alter it.
I haven't gotten to documentation or tests yet. But this should not cause any behavior changes
if you don't use it, so its safe to check it in now and work on it incrementally.
llvm-svn: 218642
The thread resume block is executed in the normal flow of thread
state queued event processing. The tests verify that it is executed
when we track the thread to be stopped and skipped when we track
it to already be running.
llvm-svn: 218638
Also added a test for the reset handling. The reset/state clearing happens
as a processed queue event. The only diff vs. standard processing is that
the exec clears the queue before queueing the activity to clear internal state.
i.e. once we get an exec, we really stop doing any other queue-based activity.
llvm-svn: 218629
works, as do breakpoints, run and pause, display zeroth frame.
See
http://reviews.llvm.org/D5503
for a fuller description of the changes in this commit.
llvm-svn: 218596
A new thread arriving while a pending signal notification
is outstanding will (1) add the new thread to the list of
stops expected before the deferred signal notification is
fired, (2) send a stop request for the new thread, and
(3) track the new thread as currently running.
llvm-svn: 218578
See http://reviews.llvm.org/D5495 for more details.
These are changes that are part of an effort to support building llgs, within the AOSP source tree, using the Android.mk
build system, when using the llvm/clang/lldb git repos from AOSP replaced with the experimental ones currently in
github.com/tfiala/aosp-{llvm,clang,lldb,compiler-rt}.
llvm-svn: 218568
Tested two pending stops before notification, where one of the pending stop
requirements was already known to be stopped.
Tested pending thread stop before notification, then reporting thread with
pending stop died and verifies pending notification is made.
llvm-svn: 218559
Glad I did - caught a bug where the auto variable was not a reference
to a set and instead was a copy. I need to review rules on that!
llvm-svn: 218558
This change does the following:
* Remove test/c++/...
* Add gtest.
* Add gtest/unittest directory for unittesting individual classes.
* Add an initial Plugins/Process?linux/ThreadStateCoordinatorTest.cpp.
- currently failing a test (intentional).
- added a bare-bones ThreadStateCoordinator.cpp to Plugins/Process/Linux,
more soon. Just enough to prove out running gtest on Ubuntu and MacOSX.
* Added recursive make machinery so that doing a 'make' in gtest/ is
sufficient to kick off the existing test several directories down.
- Caveat - I currently short circuit from gtest/unittest/Makefile directly to
the one and only gtest/unittest/Plugins/Process/Linux directory. We'll need
to add the intervening layers. I haven't done this yet since to fix the
Xcode test failure correspondence, I may need to add a python layer which
might just handle the directory crawling.
* Added an Xcode project to the lldb workspace for gtest.
- Runs the recursive make system in gtest/Makefile.
- Default target is 'test'. test and clean are supported.
- Currently does not support test failure file/line correspondence.
Requires a bit of text transformation to hook that up.
llvm-svn: 218460
See http://reviews.llvm.org/D5486 for more details.
I was tracking a problem where llgs on linux would not pick up any environment variables. On OSX there is a virtual function PlatformDarwin::GetEnvironment() which correctly sets up the list of environment variables. On linux llgs it defaults to a base class default implementation which clears the list.
I moved the OSX implementation down to PlatformPOSIX. This fixes my problem on linux still works properly on OSX.
Change by Shawn Best.
Slight tweak to convert 'virtual' to 'override' in PlatformDarwin.h virtual method override by Todd.
Tested:
Ubuntu 14.04 x86_64, cmake/ninja build + tests.
MacOSX 10.9.5 x86_64, Xcode 6.1 Beta build + tests.
llvm-svn: 218424
See thread started here for motivation:
http://lists.cs.uiuc.edu/pipermail/lldb-dev/2014-September/005225.html
This change enables the ability to set breakpoints in ccache-based and executables that
make use of preprocessed source files. This ability existed in lldb before, but was off
by default.
Change by Doug Snyder.
llvm-svn: 218405
was broken in r214984 by the addition of an unconditional error
return at the start of the code block handling this method. Remove
the errant lines.
<rdar://problem/18416691>
llvm-svn: 218291
requirement for a command instead of the smallest. e.g. if a command
requires a Target, Process, Thread, and Frame, and none of those
are available, report the largest -- Target -- as being missing
instead of the smallest -- Frame.
Patch by Paul Osmialowski.
llvm-svn: 218181
platform locations. We didn't always do an exhaustive search through all the
platform locations, so we would have to read some files out of memory even though
they existed in the exploded shared cache or SDK.
<rdar://problem/18385947>
llvm-svn: 218157
that would clear the module list, and then put it back by hand. But we forgot to
also put its sections back in the target SectionList, so we would jettison it as
unloaded when we finished handling the first real load event. Add its sections.
<rdar://problem/18385947>
llvm-svn: 218156
Changes include:
- fix it so you can select the "host" platform using "platform select host"
- change all callbacks that create platforms to returns shared pointers
- fix TestImageListMultiArchitecture.py to restore the "host" platform by running "platform select host"
- Add a new "PlatformSP Platform::Find(const ConstString &name)" method to get a cached platform
- cache platforms that are created and re-use them instead of always creating a new one
llvm-svn: 218145
For the Objective-C case, we do not have a "function type" notion, so we actually end up wrapping the clang ObjCMethodDecl in the Impl object, and ask function-y questions of it
In general, you can always ask for return type, number of arguments, and type of each argument using the TypeMemberFunction layer - but in the C++ case, you can also acquire a Type object for the function itself, which instead you can't do in the Objective-C case
llvm-svn: 218132
The $A handler was unnecessarily waiting for the launched app to hit a stop
before returning. Removed this code.
Renamed the llgs inferior launching code to LaunchProcessForDebugging ()
to prevent it from possibly being mistaken as code that lldb-platform uses
to launch a debugserver process. We probably want to look at breaking out
llgs-specific and lldb-platform-specific code into separate derived classes,
with common code in a shared base class.
llvm-svn: 218075
The issue was GDBRemoteCommunication::CheckForPacket() already fixes up any prefixed bytes (0x7d followed by value that is XOR'ed with 0x20). If we do this again, we cause binary packets to lose bytes.
This allows lldb-platform to be able to upload binaries and debug them remotely.
llvm-svn: 218002
Todd Fiala