Patch by Jake VanAdrighem!
Summary:
Fix the way we sort the llvm.used and llvm.compiler.used members.
This bug seems to have been introduced in rL183756 through a set of improper casts to GlobalValue*. In subsequent patches this problem was missed and transformed into a getName call on a ConstantExpr.
Reviewers: silvas
Subscribers: silvas, llvm-commits
Differential Revision: http://reviews.llvm.org/D12851
llvm-svn: 248728
1. Use a worklist, not a recursive approach, to avoid needless
revisitation and being repeatedly forced to jump back to the
start of the BB if a handle is invalidated.
2. Only insert operands to the worklist if they become unused
after a dead instruction is removed, so we don’t have to
visit them again in most cases.
3. Use a SmallSetVector to track the worklist.
4. Instead of pre-initting the SmallSetVector like in
DeadCodeEliminationPass, only put things into the worklist
if they have to be revisited after the first run-through.
This minimizes how much the actual SmallSetVector gets used,
which saves a lot of time.
llvm-svn: 248727
Summary:
The P5600 is an out-of-order, superscalar implementation of the MIPS32R5
architecture.
The scheduler has a few missing details (see the 'Tricky Instructions'
section and some quirks of the P5600 are deliberately omitted due to
implementation difficulty and low chance of significant benefit (e.g. the
predicate on P5600WriteEitherALU). However, testing on SingleSource is
showing significant performance benefits on some apps (seven in the 10-30%
range) and only one significant regression (12%) when
-pre-RA-sched=linearize is given. Without -pre-RA-sched=linearize the
results are more variable. Some do even better (up to 55% improvement) but
increased numbers of copies are slowing others down (up to 12%).
Overall, the scheduler as it currently stands is a 2.4% win with
-pre-RA-sched=linearize and a 2.7% win without -pre-RA-sched=linearize.
I'm sure we can improve on this further.
For completeness, the FPGA this was tested on shows some failures with and
without the P5600 scheduler. These appear to be scheduling related since
the two test runs have fairly different sets of failing tests even after
accounting for other factors (e.g. spurious connection failures) however
it's not P5600 specific since we also get some for the generic scheduler.
Reviewers: vkalintiris
Subscribers: mpf, llvm-commits, atrick, vkalintiris
Differential Revision: http://reviews.llvm.org/D12193
llvm-svn: 248725
This was split off of http://reviews.llvm.org/D13040 to make it easier to test the correctness of the implication logic. For the moment, this only handles a single easy case which shows up when eliminating and combining range checks. In the (near) future, I plan to extend this for other cases which show up in range checks, but I wanted to make those changes incrementally once the framework was in place.
At the moment, the implication logic will be used by three places. One in InstSimplify (this review) and two in SimplifyCFG (http://reviews.llvm.org/D13040 & http://reviews.llvm.org/D13070). Can anyone think of other locations this style of reasoning would make sense?
Differential Revision: http://reviews.llvm.org/D13074
llvm-svn: 248719
Originally, debug intrinsics and annotation intrinsics may prevent
the loop to be rerolled, now they are ignored.
Differential Revision: http://reviews.llvm.org/D13150
llvm-svn: 248718
supportsTailCall() has two callers. Both of them double-check isThumb1Only(),
and refuse to proceed with tail-calling in that case.
Therefore, it makes sense to move this check to
ARMSubtarget::initSubtargetFeatures, where SupportsTailCall is initialized;
and to eliminate the extra checks at the call sites.
Following a review comment, added an "assert(supportsTailCall())"
in IsEligibleForTailCall.
NFC.
llvm-svn: 248703
When AA is being used, non-aliasing stores are canonicalized to use the same
chain, and DAGCombiner::getStoreMergeAndAliasCandidates can take advantage of
this by looking only as users of a store's chain operand. However, user
iteration is not result-number specific, we need to check that the use is as a
chain operand, and not via some other operand. It is certainly possible to have
another potentially-aliasing store, which shares the first's base pointer, and
uses the first's chain's node via some other operand.
Failure to catch this situation caused, at least in the included test case, an
assert later because the relative sequence-number ordering caused later
replacement to create a cycle in the DAG.
llvm-svn: 248698
When llvm declarations have argument names, it's helpful to actually
print those names when debugging. Arguably, it'd be nice to print them
all the time, but that would mean the IR we output wouldn't round trip
through bitcode, which doesn't store the names.
Make the varous print() methods in AsmWriter optionally print "for
debug" and set that flag in the dump() methods. The only thing this
does differently for now is print the argument names in declarations.
llvm-svn: 248692
Before this change `HasSameValue` would return true for distinct
`alloca` instructions if they happened to be allocating the same
type (`alloca` instructions are not specified as reading memory). This
change adds an explicit whitelist of instruction types for which
"identical" instructions compute the same value.
Fixes PR24952.
llvm-svn: 248690
This is one step towards solving PR24766:
https://llvm.org/bugs/show_bug.cgi?id=24766
We were not producing the same IR for these two C functions because the store
to the temp bool causes extra zexts:
#include <stdbool.h>
bool switchy(char x1, char x2, char condition) {
bool conditionMet = false;
switch (condition) {
case 0: conditionMet = (x1 == x2); break;
case 1: conditionMet = (x1 <= x2); break;
}
return conditionMet;
}
bool switchy2(char x1, char x2, char condition) {
switch (condition) {
case 0: return (x1 == x2);
case 1: return (x1 <= x2);
}
return false;
}
As noted in the code comments, this test case manages to avoid the more general existing
phi optimizations where there are only 2 phi inputs or where there are no constant phi
args mixed in with the casts ops. It seems like a corner case, but if we don't catch it,
then I don't think we can get SimplifyCFG to further optimize towards the canonical form
for this function shown in the bug report.
Differential Revision: http://reviews.llvm.org/D12866
llvm-svn: 248689
Summary:
Factor the code that rewrites invokes to calls and rewrites WinEH
terminators to their "unwind to caller" equivalents into a helper in
Utils/Local, and use it in the three places I'm aware of that need to do
this.
Reviewers: andrew.w.kaylor, majnemer, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13152
llvm-svn: 248677
The fuzzer argument parser will ignore all options starting with '--' so
operation mode options should begin with '--' and fuzzer options should begin
with '-'. Fuzzer arguments must still follow --fuzzer-args so that they escape
the parsing performed by the CommandLine library.
llvm-svn: 248671
llvm::format compiles down to snprintf which has no defined rounding for
floating point arguments, and MSVC has implemented it differently from
what the BSD libcs and glibc do. Try to emulate the glibc rounding
behavior to avoid changing tests.
While there simplify code a bit and move trivial methods inline.
llvm-svn: 248665
These require multiple mov instructions to copy,
but the default value is that 1 instruction is needed.
I'm not sure if this actually changes anything.
llvm-svn: 248651
Summary:
This is the second part of fixing bug 24848 https://llvm.org/bugs/show_bug.cgi?id=24848.
If both operands of a comparison have range metadata, they should be used to constant fold the comparison.
Reviewers: sanjoy, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13177
llvm-svn: 248650
Trying to use the version with the explicit output operand
would complain because of the missing WriteSALU. I'm not sure
why it doesn't complain about this with the implicit VCC def.
llvm-svn: 248646
Summary:
If the trip count of a specific backedge is `N`, then we know that
backedge is effectively guarded by the condition `{0,+,1} u< N`. This
change teaches SCEV to use this condition to prove things in
`isLoopBackedgeGuardedByCond`.
Depends on D12948
Depends on D12949
The original checkin, r248608 had to be backed out due to an issue with
a ObjCXX unit test. That issue is now fixed, so re-landing.
Reviewers: atrick, reames, majnemer, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12950
llvm-svn: 248638
Summary:
This change teaches SCEV's `isImpliedCond` two new identities:
A u< B u< -C => (A + C) u< (B + C)
A s< B s< INT_MIN - C => (A + C) s< (B + C)
While these are useful on their own, they're really intended to support
D12950.
The original checkin, r248606 had to be backed out due to an issue with
a ObjCXX unit test. That issue is now fixed, so re-landing.
Reviewers: atrick, reames, majnemer, nlewycky, hfinkel
Subscribers: aadg, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D12948
llvm-svn: 248637
I realized that the live-out set computed for the return block is
missing the callee saved registers (the non-pristine ones to be exact).
This only affects the liveness computed for instructions inside the
function epilogue which currently none of the LivePhysRegs users in llvm
cares about, so this is just a drive-by fix without a testcase.
Differential Revision: http://reviews.llvm.org/D13180
llvm-svn: 248636
This is a fix for PR22723:
https://llvm.org/bugs/show_bug.cgi?id=22723
My first attempt at this was to change what I thought was the root problem:
xor (zext i1 X to i32), 1 --> zext (xor i1 X, true) to i32
...but we create the opposite pattern in InstCombiner::visitZExt(), so infinite loop!
My next idea was to fix the matchIfNot() implementation in PatternMatch, but that would
mean potentially returning a different size for the match than what was input. I think
this would require all users of m_Not to check the size of the returned match, so I
abandoned that idea.
I settled on just fixing the exact case presented in the PR. This patch does allow the
2 functions in PR22723 to compile identically (x86):
bool test(bool x, bool y) { return !x | !y; }
bool test(bool x, bool y) { return !x || !y; }
...
andb %sil, %dil
xorb $1, %dil
movb %dil, %al
retq
Differential Revision: http://reviews.llvm.org/D12705
llvm-svn: 248634
BranchProbability now is represented by its numerator and denominator in uint32_t type. This patch changes this representation into a fixed point that is represented by the numerator in uint32_t type and a constant denominator 1<<31. This is quite similar to the representation of BlockMass in BlockFrequencyInfoImpl.h. There are several pros and cons of this change:
Pros:
1. It uses only a half space of the current one.
2. Some operations are much faster like plus, subtraction, comparison, and scaling by an integer.
Cons:
1. Constructing a probability using arbitrary numerator and denominator needs additional calculations.
2. It is a little less precise than before as we use a fixed denominator. For example, 1 - 1/3 may not be exactly identical to 1 / 3 (this will lead to many BranchProbability unit test failures). This should not matter when we only use it for branch probability. If we use it like a rational value for some precise calculations we may need another construct like ValueRatio.
One important reason for this change is that we propose to store branch probabilities instead of edge weights in MachineBasicBlock. We also want clients to use probability instead of weight when adding successors to a MBB. The current BranchProbability has more space which may be a concern.
Differential revision: http://reviews.llvm.org/D12603
llvm-svn: 248633
It's easier to understand creating a full instruction
than the current situation where sometimes a new
instruction is created and sometimes it is awkwardly
mutated in place.
llvm-svn: 248627
This is a redo of D7208 ( r227242 - http://llvm.org/viewvc/llvm-project?view=revision&revision=227242 ).
The patch was reverted because an AArch64 target could infinite loop after the change in DAGCombiner
to merge vector stores. That happened because AArch64's allowsMisalignedMemoryAccesses() wasn't telling
the truth. It reported all unaligned memory accesses as fast, but then split some 128-bit unaligned
accesses up in performSTORECombine() because they are slow.
This patch attempts to fix the problem in AArch's allowsMisalignedMemoryAccesses() while preserving
existing (perhaps questionable) lowering behavior.
The x86 test shows that store merging is working as intended for a target with fast 32-byte unaligned
stores.
Differential Revision: http://reviews.llvm.org/D12635
llvm-svn: 248622
The algorithm would not modify the live-in list of blocks below the save
block point which is correct unless it happens to be a restore point at
the same time.
Also fixes the benign issue of live-in registers being added twice in
some cases.
The testcase is based on a test submitted by Kit Barton.
Differential Revision: http://reviews.llvm.org/D13176
llvm-svn: 248620
Summary:
The default behavior is to omit the .section directive for .text, .data,
and sometimes .bss, but some targets may want to omit this directive for
other sections too.
The AMDGPU backend will uses this to emit a simplified syntax for section
switches. For example if the section directive is not omitted (current
behavior), section switches to .hsatext will be printed like this:
.section .hsatext,#alloc,#execinstr,#write
This is actually wrong, because .hsatext has some custom STT_* flags,
which MC doesn't know how to print or parse.
If the section directive is omitted (made possible by this commit),
section switches will be printed like this:
.hsatext
The motivation for this patch is to make it possible to emit sections
with custom STT_* flags without having to teach MC about all the target
specific STT_* flags.
Reviewers: rafael, grosbach
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12423
llvm-svn: 248618
If a virtual register is copied and another copy was already
seen, replace with the previous copy. This only handles the
simplest cases for now.
This pattern shows up from various operand restrictions
AMDGPU has which require inserting copies depending
on the register class of the operands.
llvm-svn: 248611
Summary:
If the trip count of a specific backedge is `N`, then we know that
backedge is effectively guarded by the condition `{0,+,1} u< N`. This
change teaches SCEV to use this condition to prove things in
`isLoopBackedgeGuardedByCond`.
Depends on D12948
Depends on D12949
Reviewers: atrick, reames, majnemer, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12950
llvm-svn: 248608
Summary:
This new helper routine will be used in a subsequent change.
Reviewers: hfinkel
Subscribers: hfinkel, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D12949
llvm-svn: 248607
Summary:
This change teaches SCEV's `isImpliedCond` two new identities:
A u< B u< -C => (A + C) u< (B + C)
A s< B s< INT_MIN - C => (A + C) s< (B + C)
While these are useful on their own, they're really intended to support
D12950.
Reviewers: atrick, reames, majnemer, nlewycky, hfinkel
Subscribers: aadg, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D12948
llvm-svn: 248606
Don't run passes related to stack maps, garbage collection,
exceptions since these aren't useful for GPUs.
There might be a few more to turn off that I'm less sure about
(e.g. ShrinkWrapping) or I'm not sure how to disable
(SafeStack and StackProtector)
llvm-svn: 248591
This fixes a select error when the i64 source was also
bitcasted to v2i32 in the original source.
Instead of awkwardly trying to select the modified source value and
the store, replace before isel begins.
Uses a worklist to avoid possible problems from mutating the DAG,
although it seems to work OK without it.
llvm-svn: 248589
When buffer resource descriptors were built, the upper two components
of the descriptor were first composed into a 64-bit register because
legalizeOperands assumed all operands had the same register class.
Fix that problem, but keep the workaround. I'm not sure anything
actually is actually emitting such a REG_SEQUENCE now.
If multiple resource descriptors are set up with different base
pointers, this is copied with a single s_mov_b64. We probably
should fix this better by recognizing a pair of s_mov_b32 later,
but for now delete the dead code.
llvm-svn: 248585
This was only set on the final _si/_vi version, but not
on the pseudos most of codegen sees.
No test since these instructions aren't used yet.
llvm-svn: 248583
These were all using the default 32-bit VALU write class,
but the i64/f64 compares are half rate.
I'm not sure this is really correct, because they are still using
the write to VALU write class, even though they really write
to the SALU.
llvm-svn: 248582
Arguments to function calls marked "nocapture" can be marked as
non-escaping. However, nocapture is defined in terms of the lifetime
of the callee, and if the callee can directly or indirectly recurse to
the caller, the semantics of nocapture are invalid.
Therefore, we eagerly discover which SCC each function belongs to,
and later can check if callee and caller of a callsite belong to
the same SCC, in which case there could be recursion.
This means that we can't be so optimistic in
getModRefInfo(ImmutableCallsite) - previously we assumed all call
arguments never aliased with an escaping global. Now we need to check,
because a global could now be passed as an argument but still not
escape.
This also solves a related conformance problem: MemCpyOptimizer can
turn non-escaping stores of globals into calls to intrinsics like
llvm.memcpy/llvm/memset. This confuses GlobalsAA, which knows the
global can't escape and so returns NoModRef when queried, when
obviously a memcpy/memset call does indeed reference and modify its
arguments.
This fixes PR24800, PR24801, and PR24802.
llvm-svn: 248576
We now emit the compiler generated divide by zero check that was needed for the
MSVC routines. We construct a psuedo-instruction for the DBZ check as the
operation requires splitting up the BB. For the 64-bit operations, we need to
custom expand the node as we need to insert the DBZ check and then emit the
libcall to the appropriate name. Because this is target specific, it seemed
better to reproduce the expansion operation from the target-agnostic type
legalization rather than sink this there to avoid the duplication. The division
library calls now match MSVC semantically.
llvm-svn: 248561
Summary:
This also adds the first set of tests for operand bundles.
The optimizer has not been audited to ensure that it does the right
thing with operand bundles.
Depends on D12456.
Reviewers: reames, chandlerc, majnemer, dexonsmith, kmod, JosephTremoulet, rnk, bogner
Subscribers: maksfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D12457
llvm-svn: 248551
Add a FreeBSD test to restore testing of ELF OSABI other than
ELFOSABI_NONE after r248534.
Differential Revision: http://reviews.llvm.org/D13146
llvm-svn: 248550
Fix for D12561 - we weren't correctly ensuring that the base element for extension was moved to start on a boundary suitable for UNPCKL/H
llvm-svn: 248536
The doesn't seem to be a difference and ELFOSABI_NONE seems to be far more
common:
* Linux doesn't care when loading and puts ELFOSABI_NONE on core dumps.
* Gold and bfd ld produce files with ELFOSABI_NONE.
* Gold and bfd ld seems to ignore EI_OSABI other than for freebsd.
* Gas puts ELFOSABI_NONE in most .o files.
llvm-svn: 248534
These are necessary for implementing mem_fence for
OpenCL 2.0.
The VI assembler tests are disabled since it seems to be
using the wrong encoding or opcode.
llvm-svn: 248532
The pre- and post-increment version update the base register, but the post-
version was defined incorrectly. There is no test case as we don't currently
generate these instructions, but I plan on changing that in the near future.
llvm-svn: 248528
Summary:
This change teaches `CallInst`s and `InvokeInst`s to maintain a set of
operand bundles as part of its operands. `CallInst`s and `InvokeInst`s
with operand bundles co-allocate some space before their `Use` array to
hold meta information about which of its operands are part of an operand
bundle.
The strings corresponding to the bundle tags are interned into
`LLVMContextImpl::BundleTagCache`
This change does not include any parsing / bitcode support. That's the
next change.
Depends on D12455.
Reviewers: reames, chandlerc, majnemer, dexonsmith, kmod, JosephTremoulet, rnk, bogner
Subscribers: MatzeB, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D12456
llvm-svn: 248527
Currently, the availability of DSP instructions (ACLE 6.4.7) is handled in a
hand-rolled tricky condition block in tools/clang/lib/Basic/Targets.cpp, with
a FIXME: attached.
This patch changes the handling of +t2dsp to be in line with other
architecture extensions.
Following a revert of r248152 and new review comments, this patch also includes
renaming FeatureDSPThumb2 -> FeatureDSP, hasThumb2DSP() -> hasDSP(), etc.
The spelling of "t2dsp" is preserved, pending a further investigation of its
possible external usage.
Differential Revision: http://reviews.llvm.org/D12937
llvm-svn: 248519
If the shifter operand is a constant, and all of the bits shifted out
are known to be zero, then if X is known non-zero at least one
non-zero bit must remain.
llvm-svn: 248508
Fixes the overflow case of llvm.*absdiff intrinsic also updats the tests and LangRef.rst accordingly.
Differential Revision: http://reviews.llvm.org/D11678
llvm-svn: 248483
Allow a target to do something other than search for copies
that will avoid cross register bank copies.
Implement for SI by only rewriting the most basic copies,
so it should look through anything like a subregister extract.
I'm not entirely satisified with this because it seems like
eliminating a reg_sequence that isn't fully used should work
generically for all targets without them having to override
something. However, it seems to be tricky to have a simple
implementation of this without rewriting to invalid kinds
of subregister copies on some targets.
I'm not sure if there is currently a generic way to easily check
if a subregister index would be valid for the current use.
The current set of TargetRegisterInfo::get*Class functions don't
quite behave like I would expect (e.g. getSubClassWithSubReg
returns the maximal register class rather than the minimal), so
I'm not sure how to make the generic test keep searching if
SrcRC:SrcSubReg is a valid replacement for DefRC:DefSubReg. Making
the default implementation to check for simple copies breaks
a variety of ARM and x86 tests by producing illegal subregister uses.
The ARM tests are not actually changed since it should still be using
the same sharesSameRegisterFile implementation, this just relaxes
them to not check for specific registers.
llvm-svn: 248478
If the stores are storing values from loads which partially
alias the stores, we could end up placing the merged loads
and stores on the same chain which has the potential to break.
Each store may have a different chain dependency on only some
of the original loads. Create a new TokenFactor to capture all
of the required dependencies of the stores rather than assuming
all stores can use the same chain.
The testcase is a situation where this happens, although
it does not have an observable change from this. The DAG nodes
just happened to not be reordered before despite this missing
chain dependency.
This is based on an off-list report for an out of tree target
which regressed due to r246307 and I haven't managed to find a case
where the nodes do end up reordered with an in tree target.
llvm-svn: 248468
Instead of always inserting a copy in case
the super register is itself a subregister,
only extract to the super reg class if this is
actually the case.
This shouldn't really change codegen, but
makes looking at the output of SIFixSGPRCopies
easier to read.
llvm-svn: 248467
Loop unswitching produces conditional branches with constant condition,
and it's beneficial for later passes to clean this up with simplify-cfg.
We do this after the second invocation of loop-unswitch, but not after
the first one. Not doing so might cause problem for passes like
LoopUnroll, whose estimate of loop body size would be less accurate.
Reviewers: hfinkel
Differential Revision: http://reviews.llvm.org/D13064
llvm-svn: 248460
Summary:
With this change, subclasses of `llvm::User` will be able to co-allocate
a variable number of bytes (called a "descriptor") with the `llvm::User`
instance. The co-allocated descriptor can later be accessed using
`llvm::User::getDescriptor`. This will be used in later changes to
implement operand bundles.
This change steals one bit from `NumUserOperands`, but given that it is
still 28 bits wide I don't think this will be a practical issue.
This change does not allow allocating hung off uses with descriptors.
This only for simplicity, not for any fundamental reason; and we can
easily add this functionality later if needed.
Reviewers: reames, chandlerc, dexonsmith, kmod, majnemer, pete, JosephTremoulet
Subscribers: pete, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D12455
llvm-svn: 248453
Nothing is expected to change, except we do less redundant work in
clean-up.
Reviewers: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12951
llvm-svn: 248444
In -fprofile-instr-generate compilation, to remove the redundant profile
variables for the COMDAT functions, these variables are placed in the same
COMDAT group as its associated function. This way when the COMDAT function
is not picked by the linker, those profile variables will also not be
output in the final binary. This may cause warning when mix link objects
built w and wo -fprofile-instr-generate.
This patch puts the profile variables for COMDAT functions to its own COMDAT
group to avoid the problem.
Patch by xur.
Differential Revision: http://reviews.llvm.org/D12248
llvm-svn: 248440
...because that's what the cost model was intended to do.
As discussed in D12882, this fix has a temporary unintended consequence for
SimplifyCFG: it causes us to not speculate an fdiv. However, two wrongs make
PR24818 right, and two wrongs make PR24343 act right even though it's really
still wrong.
I intend to correct SimplifyCFG and add to CodeGenPrepare to account for this
cost model change and preserve the righteousness for the bug report cases.
https://llvm.org/bugs/show_bug.cgi?id=24818https://llvm.org/bugs/show_bug.cgi?id=24343
Differential Revision: http://reviews.llvm.org/D12882
llvm-svn: 248439
This time, the issue is that we weren't accounting for the possibility that
aligned DPRs could have been stored after the final "push" in a prologue. When
that happened we effectively moved a "sub sp, #N" from below the aligned stores
to above them, and everything went to pot.
To make it worse, I'd actually committed something testing that we produced
wrong code, so the test update is tiny.
llvm-svn: 248437
so the lookup works as expected after prepending the oso-prepend-path.
This manifested only on Windows, because "/" is not a relative path there.
llvm-svn: 248423
Patch by: simoncook
Unlike BitCasts, AddrSpaceCasts do not always produce an output the same size as its input, which was previously assumed. This fixes cases where two address spaces do not have the same size pointer, as an assertion failure would occur when trying to prove deferenceability. LoopUnswitch is used in the particular test, but LICM also exhibits the same problem.
Differential Revision: http://reviews.llvm.org/D13008
llvm-svn: 248422
This patch changes the order of GEPs generated by Splitting GEPs
pass, specially when one of the GEPs has constant and the base is
loop invariant, then we will generate the GEP with constant first
when beneficial, to expose more cases for LICM.
If originally Splitting GEP generate the following:
do.body.i:
%idxprom.i = sext i32 %shr.i to i64
%2 = bitcast %typeD* %s to i8*
%3 = shl i64 %idxprom.i, 2
%uglygep = getelementptr i8, i8* %2, i64 %3
%uglygep7 = getelementptr i8, i8* %uglygep, i64 1032
...
Now it genereates:
do.body.i:
%idxprom.i = sext i32 %shr.i to i64
%2 = bitcast %typeD* %s to i8*
%3 = shl i64 %idxprom.i, 2
%uglygep = getelementptr i8, i8* %2, i64 1032
%uglygep7 = getelementptr i8, i8* %uglygep, i64 %3
...
For no-loop cases, the original way of generating GEPs seems to
expose more CSE cases, so we don't change the logic for no-loop
cases, and only limit our change to the specific case we are
interested in.
llvm-svn: 248420
Note: I'm am not trying to describe what "should be"; I'm only describing what is true today.
This came out of my recent question to llvm-dev titled: When can the dominator tree not contain a node for a basic block?
Differential Revision: http://reviews.llvm.org/D13078
llvm-svn: 248417
Add two new ways of accessing the unsafe stack pointer:
* At a fixed offset from the thread TLS base. This is very similar to
StackProtector cookies, but we plan to extend it to other backends
(ARM in particular) soon. Bionic-side implementation here:
https://android-review.googlesource.com/170988.
* Via a function call, as a fallback for platforms that provide
neither a fixed TLS slot, nor a reasonable TLS implementation (i.e.
not emutls).
This is a re-commit of a change in r248357 that was reverted in
r248358.
llvm-svn: 248405
The BEXTR comments didn't make sense before, we may want to extend the
FP logic transform to work on vectors, and this way is more beautiful.
llvm-svn: 248404
Summary:
This is the first part of fixing bug 24848 https://llvm.org/bugs/show_bug.cgi?id=24848.
When range metadata is provided, it should be used to constant fold comparisons with constant values.
Reviewers: sanjoy, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12988
llvm-svn: 248402
This patch extends llvm-dsymutil's ODR type uniquing machinery to also
resolve forward decls for types defined in clang modules.
http://reviews.llvm.org/D13038
llvm-svn: 248398
This reverts r248388 and fixes the underlying bug: hasAddr64 was initialized
in runOnMachineFunction, but runOnMachineFunction isn't ever called in
CodeGen/WebAssembly/global.ll since that testcase has no functions. The fix
here is to use AsmPrinter's getPointerSize() as needed to determine the
pointer size instead.
llvm-svn: 248394
This changes the behavior of AddAligntmentAssumptions to match its
comment. I.e, prove the asserted alignment in the context of the caller,
not the callee.
Thanks to Mehdi Amini for seeing the issue here! Also to Artur Pilipenko
who also saw a fix for the issue.
rdar://22521387
Differential Revision: http://reviews.llvm.org/D12997
llvm-svn: 248390
Invoking a function which returns an aggregate can sometimes be
transformed to return a scalar value. However, this means that we need
to create an insertvalue instruction(s) to recreate the correct
aggregate type. We achieved this by inserting an insertvalue
instruction at the invoke's normal successor. However, this is not
feasible if the normal successor uses the invoke's return value inside a
PHI node.
Instead, split the edge between the invoke and the unwind successor and
create the insertvalue instruction in the new basic block. The new
basic block's successor will be the old invoke successor which leaves
us with IR which is well behaved.
This fixes PR24906.
llvm-svn: 248387
This change allows dead store elimination to remove zero and null stores into memory freshly allocated with calloc-like function.
Differential Revision: http://reviews.llvm.org/D13021
llvm-svn: 248374
The ARM backend has some logic that only allows the fast-isel to be enabled for
subtargets where it is known to be stable. This adds a backend option to
override this and force the fast-isel to be used for any target, to allow it to
be tested.
This is an ARM-specific option, because no other backend disables the fast-isel
on a per-subtarget basis.
llvm-svn: 248369
This patches removes the x86.sse41.pmovsx* intrinsics, provides a suitable upgrade path and updates relevant tests to sign extend a subvector instead.
LLVM counterpart to D12835
Differential Revision: http://reviews.llvm.org/D13002
llvm-svn: 248368
Summary:
It is fairly common to call SE->getConstant(Ty, 0) or
SE->getConstant(Ty, 1); this change makes such uses a little bit
briefer.
I've refactored the call sites I could find easily to use getZero /
getOne.
Reviewers: hfinkel, majnemer, reames
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D12947
llvm-svn: 248362
Add two new ways of accessing the unsafe stack pointer:
* At a fixed offset from the thread TLS base. This is very similar to
StackProtector cookies, but we plan to extend it to other backends
(ARM in particular) soon. Bionic-side implementation here:
https://android-review.googlesource.com/170988.
* Via a function call, as a fallback for platforms that provide
neither a fixed TLS slot, nor a reasonable TLS implementation (i.e.
not emutls).
llvm-svn: 248357
Fixed the issue that when there is an edge from the jump table to the default statement, we should check it directly instead of checking if the sibling of the jump table header is a successor of the jump table header, which may not be the default statment but a successor of it.
llvm-svn: 248354
We may have subregister defs which are unused but not discovered and
cleaned up prior to liveness analysis. This creates multiple connected
components in the resulting live range which are forbidden in the
MachineVerifier because they would unnecesarily constrain the register
allocator. Rewrite those dead definitions to define a newly created
virtual register.
Differential Revision: http://reviews.llvm.org/D13035
llvm-svn: 248335
This improves ConnectedVNInfoEqClasses::Distribute() to distribute the
segments and value numbers in the subranges instead of conservatively
clearing all subregister info.
No separate test here, just clearing the subrange instead of properly
distributing them would however break my upcoming fix regarding dead super
register definitions.
Differential Revision: http://reviews.llvm.org/D13075
llvm-svn: 248334
Apart from checking that GlobalVariable is a constant, we should check
that it's not a weak constant, in which case we can't propagate its
value.
llvm-svn: 248327
ARM counterpart to r248291:
In the comparison failure block of a cmpxchg expansion, the initial
ldrex/ldxr will not be followed by a matching strex/stxr.
On ARM/AArch64, this unnecessarily ties up the execution monitor,
which might have a negative performance impact on some uarchs.
Instead, release the monitor in the failure block.
The clrex instruction was designed for this: use it.
Also see ARMARM v8-A B2.10.2:
"Exclusive access instructions and Shareable memory locations".
Differential Revision: http://reviews.llvm.org/D13033
llvm-svn: 248294
In the comparison failure block of a cmpxchg expansion, the initial
ldrex/ldxr will not be followed by a matching strex/stxr.
On ARM/AArch64, this unnecessarily ties up the execution monitor,
which might have a negative performance impact on some uarchs.
Instead, release the monitor in the failure block.
The clrex instruction was designed for this: use it.
Also see ARMARM v8-A B2.10.2:
"Exclusive access instructions and Shareable memory locations".
Differential Revision: http://reviews.llvm.org/D13033
llvm-svn: 248291
Summary:
Almost no functional change since the InstrItinData's have been duplicated.
The one functional change is to remove IIBranch from the MSA branches. The
classes will be assigned to the MSA instructions as part of implementing
the P5600 scheduler.
II_IndirectBranchPseudo and II_ReturnPseudo can probably be removed. I've
preserved the itinerary information for the corresponding pseudo
instructions to avoid making a functional change to these pseudos in
this patch.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12189
llvm-svn: 248273
Summary:
The only instructions left in IIAlu are MIPS16 specific. We're not
implementing a MIPS16 scheduler at this time so rename the class to make it
obvious that they are MIPS16 instructions.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12188
llvm-svn: 248267
The C standard has historically not specified whether or not these functions should raise the inexact flag. Traditionally on Darwin, these functions *did* raise inexact, and the llvm lowerings followed that conventions. n1778 (C bindings for IEEE-754 (2008)) clarifies that these functions should not set inexact. This patch brings the lowerings for arm64 and x86 in line with the newly specified behavior. This also lets us fold some logic into TD patterns, which is nice.
Differential Revision: http://reviews.llvm.org/D12969
llvm-svn: 248266
Summary:
Based on a patch by David Chisnall. I've modified the original patch as follows:
* Moved the expansion to the TargetStreamers so that the directive isn't
expanded when emitting assembly.
* Fixed an operand order bug.
* Changed the move instructions from DADDu to OR to match recent changes to GAS.
Reviewers: vkalintiris
Subscribers: llvm-commits, emaste, seanbruno, theraven
Differential Revision: http://reviews.llvm.org/D13017
llvm-svn: 248258
Summary:
No functional change since no InstrItinData is provided.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12190
llvm-svn: 248257
Summary:
For fixed length instructions, we can use -max_len to limit the fuzzer to a
single instruction. This doesn't work for variable length instruction sets
since a 4-byte input could consist of one 4-byte instruction or two 2-byte
instructions.
This patch adds a --insn-limit to llvm-mc-fuzzer to limit the input in
terms of instructions processed.
Reviewers: kcc
Subscribers: kcc, llvm-commits
Differential Revision: http://reviews.llvm.org/D12960
llvm-svn: 248253
This patch generalizes the lowering of shuffles as zero extensions to allow extensions that don't start from the first element. It now recognises extensions starting anywhere in the lower 128-bits or at the start of any higher 128-bit lane.
The motivation was to reduce the number of high cost pshufb calls, but it also improves the SSE2 case as well.
Differential Revision: http://reviews.llvm.org/D12561
llvm-svn: 248250
Previously the code added an extra nullptr entry to a static array and then created an ArrayRef with a size one less than the static array. If there were no other entries the array would just contain the nullptr and the ArrayRef would be crated with size 0.
Instead, put the right number of entries in the array and explicitly emit 'None' if the size would be 0. This allows the static array constructor of makeArrayRef to be used.
llvm-svn: 248244
Summary:
We should either require the DT info to be available, or check if it's
available in every place we use DT (and we already miss such check in
one place, which causes failures in some cases). As other loop passes
preserve DT and it's usually available, it makes sense to just require
it here.
There is no regression test, because the bug only shows up if pass
manager decides to clean DT info right before LoopUnswitch. If
loop-unswitch is run separately, DT is available, so bug isn't exposed.
Reviewers: chandlerc, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13036
llvm-svn: 248230
We know that an argmemonly function can only access memory pointed to by it's pointer arguments. Rather than needing to consider all possible stores as aliasing (as we do for a readonly function), we can only consider the aliasing of the pointer arguments.
Note that this change only addresses hoisting. I'm thinking about how to address speculation safety as well, but that will be a different change.
FYI, argmemonly disallows accessing memory through non-pointer typed arguments.
Differential Revision: http://reviews.llvm.org/D12771
llvm-svn: 248220
Turns out that not every basic block is guaranteed to have a node within the DominatorTree. This is really hard to trigger, but the test case from the PR managed to do so. There's active discussion continuing about what documentation and/or invariants needed cleaned up.
llvm-svn: 248216
This patch adds support for combining patterns such as (FMUL(FADD(1.0, x), y)) and (FMUL(FSUB(x, 1.0), y)) to their FMA equivalents.
This is useful in particular for linear interpolation cases such as (FADD(FMUL(x, t), FMUL(y, FSUB(1.0, t))))
Differential Revision: http://reviews.llvm.org/D13003
llvm-svn: 248210
The vext pseudo-instruction takes the number of elements that need to be
extracted, not the number of bytes. Hence, use the number of elements
directly instead of scaling them with a factor.
Reviewers: Silviu Baranga, James Molloy
(not reflected in the differential revision)
Differential Revision: http://reviews.llvm.org/D12974
llvm-svn: 248208
We're currently losing any fast-math flags when synthesizing fcmps for
min/max reductions. In LV, make sure we copy over the scalar inst's
flags. In LoopUtils, we know we only ever match patterns with
hasUnsafeAlgebra, so apply that to any synthesized ops.
llvm-svn: 248201
Because mod is always exact, this function should have never taken a rounding mode argument. The actual implementation still has issues, which I'll look at resolving in a subsequent patch.
llvm-svn: 248195
Based on conversations with Justin and a few others, these constructors
are really useful to have in the executable so that you can call them
from the debugger. After some measurements, these *particular* calls
aren't so problematic as to make them a good tradeoff for always inline.
Please let me know if there are other functions really needed for
debugging. The always inline attribute is a hack that we should only
really employ when it doesn't hurt.
llvm-svn: 248188
The definition of the DivergenceAnalysis pass was in a CPP
file and wasn't accessible to users of the analysis to get it
through "getAnalysis<>()".
This patch extracts the definition into a separate header that
can be used by users of the analysis to fetch the results.
Patch by Volkan Keles (vkeles@apple.com)
llvm-svn: 248186
evaluate whether 'readonly' or 'readnone' apply to a given function.
This both reduces indentation and will make it easy to share the logic
with a new pass manager implementation.
llvm-svn: 248181
The ISD::FPOW and ISD::FSINCOS opcodes default to Legal, but there
is no legal instruction for those on SystemZ. This could cause
LLVM internal errors. Fixed by setting the operation action to
Expand for those opcodes.
Also added test cases for all other LLVM IR intrinsics that should
generate a library call. (Those already work correctly since the
default operation action is fine.)
llvm-svn: 248180
If storing multiple FP constants, some subset of the stores
would be replaced with integers due to visit order, so
MergeConsecutiveStores would only partially merge
these.
llvm-svn: 248169
Currently, the availability of DSP instructions (ACLE 6.4.7) is handled in a
hand-rolled tricky condition block in tools/clang/lib/Basic/Targets.cpp, with
a FIXME: attached.
This patch changes the handling of +t2dsp to be in line with other
architecture extensions.
Following review comments, also updating the description of FeatureDSPThumb2
in ARM.td.
Differential Revision: http://reviews.llvm.org/D12937
llvm-svn: 248152
Summary:
Also tightened up the test and made a trivial fix to prevent double-newline
after emitting .cpsetup directives.
Reviewers: vkalintiris
Subscribers: seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D12956
llvm-svn: 248143
Because -indvars widens induction variables through arithmetic,
`NeverNegative` cannot be a property of the `WidenIV` (a `WidenIV`
manages information for all transitive uses of an IV being widened,
including uses of `-1 * IV`). Instead it must live on `NarrowIVDefUse`
which manages information for a specific def-use edge in the transitive
use list of an induction variable.
This change also adds a test case that demonstrates the problem with
r248045.
llvm-svn: 248107
Now that we have fast vector CTPOP implementations we can use this to speed up vector CTTZ using the pattern (cttz(x) = ctpop((x & -x) - 1))
Additionally, for AVX512CD that provides lzcnt instructions we can use the pattern (cttz_undef(x) = (width - 1) - ctlz(x & -x))
Differential Revision: http://reviews.llvm.org/D12663
llvm-svn: 248091
Summary:
If an induction variable is provably non-negative, its sign extension is
equal to its zero extension. This means narrow uses like
icmp slt iNarrow %indvar, %rhs
can be widened into
icmp slt iWide zext(%indvar), sext(%rhs)
Reviewers: atrick, mcrosier, hfinkel
Subscribers: hfinkel, reames, llvm-commits
Differential Revision: http://reviews.llvm.org/D12745
llvm-svn: 248045
In if-conversion, there is a utility function MergeBlocks() that is used to merge blocks. However, when new edges are built in this function the edge weight is either not provided or not updated properly, leading to a modified CFG with incorrect edge weights. This patch corrects this issue.
Differential Revision: http://reviews.llvm.org/D12513
llvm-svn: 248030
Matt Arsenault