As part of this effort, duplicate and correct the predicates of some
aliases. Also disable code generation of some short form instructions
for FastISel, as it would otherwise reject them.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D47075
llvm-svn: 333530
Now LLVM assembler cannot process the following code and generates an
error. GNU tools support .set assignment directive with numeric register
name.
```
.set r4, 4
test.s:1:11: error: invalid token in expression
.set r4, $4
^
```
This patch teach assembler to handle such directives correctly.
Unfortunately a numeric register name cannot be represented as an
expression. That's why we have to maintain a separate `StringMap`
in the `MipsAsmParser` to keep mapping between aliases names and
register numbers.
Differential revision: https://reviews.llvm.org/D47464
llvm-svn: 333428
Emit R_MICROMIPS_GPREL16/R_MICROMIPS_SUB/R_MICROMIPS_LO16 and
R_MICROMIPS_GPREL16/R_MICROMIPS_SUB/R_MICROMIPS_HI16 chains of
relocations for %lo(%neg(%gp_rel())) and %hi(%neg(%gp_rel()))
expressions in case of microMIPS.
Differential Revision: http://reviews.llvm.org/D47220
llvm-svn: 333409
Emit R_MICROMIPS_HIGHER / R_MICROMIPS_HIGHEST relocations for %higher()
and %highest() expressions in case of microMIPS. These relocations do
exactly the same things as R_MIPS_HIGHER / R_MIPS_HIGHEST, but for
consistency it's better to write microMIPS variants.
Differential Revision: http://reviews.llvm.org/D47219
llvm-svn: 333407
Previously, their listed predicates were overridden at the scope level.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D46947
llvm-svn: 333405
Before this fix the following code triggers two error messages. The
second one is at least useless:
test.s:1:9: error: expected identifier after .set
.set 123, $a0
^
test-set.s:1:9: error: unexpected token, expected comma
.set 123, $a0
^
llvm-svn: 333402
Previously the compiler was using the microMIPSR3 variants, incorrectly.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D46948
llvm-svn: 332820
This is a follow up to the rL330983. The patch teaches ld, sd, and lld
commands accept 32-bit memory offsets by replacing `mem_simm16` operand
to `mem_simmptr`. In fact, these commands should accept 64-bit offsets,
but so large offsets require another command expanding and will be
supported by a separate patch.
Differential Revision: https://reviews.llvm.org/D46629
llvm-svn: 331997
This is a follow up to the rL330983. The patch teaches lh and lhu
commands accepts 32-bit memory offsets by replacing `mem_simm16` operand
to `mem_simmptr`.
Differential Revision: https://reviews.llvm.org/D46513
llvm-svn: 331996
And eliminatw the duplication of those instructions for microMIPS32r6.
Reviewers: smaksimovic, abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D46117
llvm-svn: 331526
Previously these instructions were unselectable and instead were generated
through the instruction mapping tables.
Reviewers: atanasyan, smaksimovic, abeserminji
Differential Revision: https://reviews.llvm.org/D46055
llvm-svn: 331165
`lb` and `lbu` commands accepts 16-bit signed offsets. But GAS accepts
larger offsets for these commands. If an offset does not fit in 16-bit
range, `lb` command is translated into lui/lb or lui/addu/lb series.
It's interesting that initially LLVM assembler supported this feature,
but later it was broken.
This patch restores support for 32-bit offsets. It replaces `mem_simm16`
operand for `LB` and `LBu` definitions by the new `mem_simmptr` operand.
This operand is intended to check that offset fits to the same size as
using for pointers. Later we will be able to extend this rule and
accepts 64-bit offsets when it is possible.
Some issues remain:
- The regression also affects LD, SD, LH, LHU commands. I'm going
to fix them by a separate patch.
- GAS accepts any 32-bit values as an offset. Now LLVM accepts signed
16-bit values and this patch extends the range to signed 32-bit offsets.
In other words, the following code accepted by GAS and still triggers
an error by LLVM:
```
lb $4, 0x80000004
# gas
lui a0, 0x8000
lb a0, 4(a0)
```
- In case of 64-bit pointers GAS accepts a 64-bit offset and translates
it to the li/dsll/lb series of commands. LLVM still rejects it.
Probably this feature has never been implemented in LLVM. This issue
is for a separate patch.
```
lb $4, 0x800000001
# gas
li a0, 0x8000
dsll a0, a0, 0x14
lb a0, 4(a0)
```
Differential Revision: https://reviews.llvm.org/D45020
llvm-svn: 330983
Correct the definitions of ei, di, eret, deret, wait, syscall and break.
Also provide microMIPS specific aliases to match the MIPS aliases.
Additionally correct the definition of the wait instruction so that
it is present in the instruction mapping tables.
Reviewers: smaksimovic, abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D45939
llvm-svn: 330952
This is part of fixing the instruction predicates for MIPS.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D44212
This patch relands r327409, hopefully without the problematic part of the
tests that cause FileCheck to assert on the windows expensive checks bot.
llvm-svn: 330741
Current code does not check that a register number is in the 0-31 range.
Sometimes the parser checks that later for some kinds of instructions,
but that leads to unclear / incorrect error messages like that:
% cat test.s
.text
lb $4, 8($32)
% llvm-mc test.s -triple=mips64-unknown-linux
test.s:2:10: error: expected memory with 16-bit signed offset
lb $4, 8($32)
^
Sometimes the parser just crashes:
% cat test.s
.text
lw $4, 8($32)
% llvm-mc test.s -triple=mips64-unknown-linux
This patch resolves the problem by checking that register number after
'$' sign is in the 0-31 range. If the number is out of the range the
parser shows the `invalid register number` error, but treats invalid
register number as a normal one to continue parsing and catch other
possible errors.
Differential Revision: https://reviews.llvm.org/D45919
llvm-svn: 330732
On Hexagon "x = y" is a syntax used in most instructions, and is not
treated as a directive.
Differential Revision: https://reviews.llvm.org/D44256
llvm-svn: 328635
This is part of fixing the instruction predicates for MIPS.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D44212
llvm-svn: 327409
These instructions are defined as taking a GPR register and a
coprocessor register for ISAs up to MIPS32. MIPS32 extended the
definition to allow a selector--a value from 0 to 32--to access
another register.
These instructions are now internally defined as being MIPS-I
instructions, but are rejected for pre-MIPS32 ISA's if they have
an explicit selector which is non-zero. This deviates slightly from
GAS's behaviour which rejects assembly instructions with an
explicit selector for pre-MIPS32 ISAs.
E.g:
mfc0 $4, $5, 0
is rejected by GAS for MIPS-I to MIPS-V but will be accepted
with this patch for MIPS-I to MIPS-V.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D41662
llvm-svn: 326890
An upcoming patch D41434, changes the ordering of the matcher table
for assembly. This patch corrects the definition of the normal MIPS
cvt.d.w not to be available in microMIPS.
llvm-svn: 325589
Instructions affected:
mthc1, mfhc1, add.d, sub.d, mul.d, div.d,
mov.d, neg.d, cvt.w.d, cvt.d.s, cvt.d.w, cvt.s.d
These instructions are now defined for
microMIPS32r3 + microMIPS32r6 in MicroMipsInstrFPU.td
since they shared their encoding with those already defined
in microMIPS32r6InstrInfo.td and have been therefore
removed from the latter file.
Some instructions present in MicroMipsInstrFPU.td which
did not have both AFGR64 and FGR64 variants defined have
been altered to do so.
Differential revision: https://reviews.llvm.org/D42738
llvm-svn: 324584
- Alter abs for micromips to have both AFGR64 and FGR64
variants, same as sqrt
- Remove sqrt and abs from MicroMips32r6InstrInfo.td,
use micromips FGR64 variants
- Restrict non-micromips abs/sqrt with NotInMicroMips
predicate
Differential revision: https://reviews.llvm.org/D41439
llvm-svn: 323184
During the review of D40362 I spotted that this test wasn't actually
testing the eva instructions due to '-mattr==eva', rather than '-mattr=+eva',
which resulted in test having no effect.
llvm-svn: 321273
This patch resubmits the SVE ZIP1/ZIP2 patch series consisting of
of r320992, r320986, r320973, and r320970 by reverting
https://reviews.llvm.org/rL321024.
The issue that caused r321024 has been addressed in https://reviews.llvm.org/rL321158,
so this patch-series should be safe to resubmit.
llvm-svn: 321163
This reverts changes r320992, r320986, r320973, and r320970.
r320970 by itself breaks the test case, and the rest depend on it.
Test case will land soon.
llvm-svn: 321024
Summary:
When emitting a diagnostic for an invalid operand, a specific diagnostic
should only be reported when the instruction being matched is actually
enabled by the feature flags.
Patch [3/4] in a series to add parsing of predicates and properly parse SVE
ZIP1/ZIP2 instructions. This patch fixes bogus diagnostic messages for when
the SVE feature is not specified.
Reviewers: rengolin, craig.topper, olista01, sdardis, stoklund
Reviewed By: olista01, sdardis
Subscribers: fhahn, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D40362
llvm-svn: 320986
All files and parts of files related to microMIPS4R6 are removed.
When target is microMIPS4R6, errors are printed.
This is LLVM part of patch.
Differential Revision: https://reviews.llvm.org/D35625
llvm-svn: 320350
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
This patch fixes an issue where microMIPS ASE flag is not set
when a function has micromips attribute or when .set micromips
directive is used.
Differential Revision: https://reviews.llvm.org/D40316
llvm-svn: 318948
This adjusts the tests to hopfully pacify the
llvm-clang-x86_64-expensive-checks-win buildbot.
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 318207
Correct the definition of 'j' as being unavailable for microMIPS32R6 and
provide the 'b' assembly idiom for codegen purposes for microMIPS32r3.
Provide the necessary 'br' pattern for microMIPS32R6 as it now longer
incorrectly uses the 'j' instruction.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39741
llvm-svn: 317801
Previously, the 'movep' instruction was defined for microMIPS32r3 and
shared that definition with microMIPS32R6. 'movep' was re-encoded for
microMIPS32r6, so this patch provides the correct encoding.
Secondly, correct the encoding of the 'rs' and 'rt' operands which have
an instruction specific encoding for the registers those operands accept.
Finally, correct the decoding of the 'dst_regs' operand which was extracting
the relevant field from the instruction, but was actually extracting the
field from the alreadly extracted field.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39495
llvm-svn: 317475
Mark all symbols involved with TLS relocations as being TLS symbols.
This resolves PR35140.
Thanks to Alex Crichton for reporting the issue!
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39591
llvm-svn: 317470
These instructions were previously marked as codegen only preventing
them from being assembled as microMIPS or disassembled.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D39123
llvm-svn: 316656
Previously these instructions were marked codegen only and had
an under-specified instruction description that did not record the
fcc register.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D38847
llvm-svn: 315905
Add instruction definitions for FP32 mode for recip.d and rsqrt.d.
Previously these instructions were only defined when targeting the
full 64-bit FPU model but were not guarded properly.
Reviewers: nitesh.jain, atanasyan
Differential Revision: https://reviews.llvm.org/D38400
llvm-svn: 315318
Previously, the parsing of the 'subu $reg, ($reg,) imm' relied on a parser
which also rendered the operand to the instruction. In some cases the
general parser could construct an MCExpr which was not a MCConstantExpr
which MipsAsmParser was expecting.
Address this by altering the special handling to cope with unexpected inputs
and fine-tune the handling of cases where an register name that is not
available in the current ABI is regarded as not a match for the custom parser
but also not as an outright error.
Also enforces the binutils restriction that only constants are accepted.
This partially resolves PR34391.
Thanks to Ed Maste for reporting the issue!
Reviewers: nitesh.jain, arichardson
Differential Revision: https://reviews.llvm.org/D37476
llvm-svn: 315310
Implement .set dspr2 directive with appropriate feature bits. This
directive is a counterpart of -mattr=dspr2 command line option with the
exception that it does not influence elf header flags.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D38537
llvm-svn: 314994
This patch disables codegen support for branch likely instructions to
address a potential bug. These branches were unselectable as
they had the same patterns as the normal branches but came after them
when ISel was concerned.
The branch likely instructions were marked as having no delay
slots when they have annulling delay slots. The delay slot filler
does not currently handle annulling delay slot branches, so this
would lead to wrong codegen if these branches were generated.
Reviewers: atanasyan, nitesh.jain
Differential Revision: https://reviews.llvm.org/D38169
llvm-svn: 314421
In case of using a "nested" relocation expressions like this
`%hi(%neg(%gp_rel()))`, N32 ABI requires generation of three consecutive
relocations. That differs from the N64 ABI case where all relocations
are packed into the single relocation record.
llvm-svn: 313879
The N32 ABI uses RELA relocation format, do not use 3-in-1 relocation's
encoding, and uses ELFCLASS32. This change passes the `IsN32` flag
to the `MCAsmBackend` to distinguish usage of N32 ABI.
We still do not handle some cases like providing the `-target-abi=o32`
command line option with the `mips64` target triple. That's why
elf_header.s contains some "FIXME" strings. This case will be fixed in
a separate patch.
Differential revision: https://reviews.llvm.org/D37960
llvm-svn: 313873
The other members of the dext family of instructions (dextm, dextu) are
traditionally handled by the assembler selecting the right variant of
'dext' depending on the values of the position and size operands.
When these instructions are disassembled, rather than reporting the
actual instruction, an equivalent aliased form of 'dext' is generated
and is reported. This is to mimic the behaviour of binutils.
Reviewers: slthakur, nitesh.jain, atanasyan
Differential Revision: https://reviews.llvm.org/D34887
llvm-svn: 313276
Traditionally GAS has provided automatic selection between dins, dinsm and
dinsu. Binutils also disassembles all instructions in that family as 'dins'
rather than the actual instruction.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D34877
llvm-svn: 313267
This patch corrects the definition of the DINSM instruction.
Specification for DINSM instruction for Mips64 says that size operand should
be 2 <= size <= 64, but it is defined as uimm5_inssize_plus1 which gives
range of 1 .. 32.
Patch by Aleksandar Beserminji.
Differential Revision: https://reviews.llvm.org/D37683
llvm-svn: 313149
This adjusts the tests to hopfully pacify the llvm-clang-x86_64-expensive-checks-win
buildbot.
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 310834
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
The last version of this patch broke one of the expensive checks buildbots,
this version changes the failing test/MC/Mips/mt/invalid.s and other invalid
tests to write the errors to a file and run FileCheck on that, rather than
relying on the 'not llvm-mc ... <%s 2>&1 | Filecheck %s' idiom.
Hopefully this will sarisfy the buildbot.
llvm-svn: 308023
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 307836
This patch implements the .module and .set directives for the MT ASE,
notably that .module sets the relevant flags in .MIPS.abiflags and .set
doesn't.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35249
llvm-svn: 307716
Preparatory work for adding the MIPS MT (multi-threading) ASE instructions.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35247
llvm-svn: 307679
In particular, use CALL16 (similar to O32) for address loads into T9 for certain
cases. Otherwise use a %got_disp relocation to load the address of a symbol.
Small offsets (small enough to fit in a 16-bit signed immediate) can be used and
are added to the symbol address after it is loaded from the GOT. Larger offsets
are currently unsupported and result in an error from the assembler.
Reviewers: sdardis
Reviewed By: sdardis
Patch by: John Baldwin
Subscribers: llvm-commits, seanbruno, arichardson, emaste, dim
Differential Revision: https://reviews.llvm.org/D33948
llvm-svn: 306831
Add the instruction aliases for ds(r|l)l for the two operand alias
of ds(r|l)lv and the aliases ds(r|l)l with the three register operands.
llvm-svn: 306405
After fixing (r306173) a failing test in the lld test suite (r306173),
reland r306095.
Original commit message:
[mips] Fix register positions in the aui/daui instructions
Swapped the position of the rt and rs register in the aui/daui
instructions for mips32r6 and mips64r6. With this change, the format of
the generated instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
llvm-svn: 306174
ELF/mips-plt-r6.s in lld-test is failing. Reverting the change.
Original commit message:
[mips] Fix register positions in the aui/daui instructions
Swapped the position of the rt and rs register in the aut/daui
instructions for mips32r6 and mips64r6. With this change, the format of
the generated instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
llvm-svn: 306099
Swapped the position of the rt and rs register in the aut/daui instructions
for mips32r6 and mips64r6. With this change, the format of the generated
instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D33988
llvm-svn: 306095
This patch allows $AT to be used as a register name in assembly files.
Currently only $at is recognized as a valid register name.
Patch by Stanislav Ocovaj.
Differential Revision: https://reviews.llvm.org/D34348
llvm-svn: 306007
Rather than creating a separate ".rdata" section distinct from the
customary ".rodata" in ELF, ".rdata" switches to the ".rodata" section.
This patch relands r305949 and r305950 with the correct commit message
and addresses nit raised during review.
Patch By: John Baldwin!
Differential Revision: https://reviews.llvm.org/D34452
llvm-svn: 305995
Changed immediate type for repl.ph from uimm10 to simm10 as per the specs.
Repl.qb still accepts uimm8. Both instructions now mimic the behaviour of
GNU as.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D33594
llvm-svn: 304918
Simon Dardis