A PCHContainerOperations abstract interface provides operations for
creating and unwrapping containers for serialized ASTs (precompiled
headers and clang modules). The default implementation is
RawPCHContainerOperations, which uses a flat file for the output.
The main application for this interface will be an
ObjectFilePCHContainerOperations implementation that uses LLVM to
wrap the module in an ELF/Mach-O/COFF container to store debug info
alongside the AST.
rdar://problem/20091852
llvm-svn: 240225
This flag controls whether a given sanitizer traps upon detecting
an error. It currently only supports UBSan. The existing flag
-fsanitize-undefined-trap-on-error has been made an alias of
-fsanitize-trap=undefined.
This change also cleans up some awkward behavior around the combination
of -fsanitize-trap=undefined and -fsanitize=undefined. Previously we
would reject command lines containing the combination of these two flags,
as -fsanitize=vptr is not compatible with trapping. This required the
creation of -fsanitize=undefined-trap, which excluded -fsanitize=vptr
(and -fsanitize=function, but this seems like an oversight).
Now, -fsanitize=undefined is an alias for -fsanitize=undefined-trap,
and if -fsanitize-trap=undefined is specified, we treat -fsanitize=vptr
as an "unsupported" flag, which means that we error out if the flag is
specified explicitly, but implicitly disable it if the flag was implied
by -fsanitize=undefined.
Differential Revision: http://reviews.llvm.org/D10464
llvm-svn: 240105
We used to have a flag to enable module maps, and two more flags to enable
implicit module maps. This is all redundant; we don't need any flag for
enabling module maps in the abstract, and we don't usually have -fno- flags for
-cc1. We now have just a single flag, -fimplicit-module-maps, that enables
implicitly searching the file system for module map files and loading them.
The driver interface is unchanged for now. We should probably rename
-fmodule-maps to -fimplicit-module-maps at some point.
llvm-svn: 239789
Summary:
The goal of this patch is to make `-verify` easier to use when testing libc++. The `notes` attached to compile error diagnostics are numerous and relatively unstable when they reference libc++ header internals. This patch allows libc++ to write stable compilation failure tests by allowing unexpected diagnostic messages to be ignored where they are not relevant.
This patch adds a new CC1 flag called `-verify-ignore-unexpected`. `-verify-ignore-unexpected` tells `VerifyDiagnosticsConsumer` to ignore *all* unexpected diagnostic messages. `-verify-ignore-unexpected=<LevelList>` can be used to only ignore certain diagnostic levels. `<LevelList>` is a comma separated list of diagnostic levels to ignore. The supported levels are `note`, `remark`, `warning` and `error`.
Reviewers: bogner, grosser, EricWF
Reviewed By: EricWF
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D10138
llvm-svn: 239665
CodeGenOptions and onto the PassManagerBuilder. This enables gating
the new EliminateAvailableExternally module pass on whether we are
preparing for LTO.
If we are preparing for LTO (e.g. a -flto -c compile), the new pass is not
included as we want to preserve available externally functions for possible
link time inlining.
llvm-svn: 239481
If the type isn't trivially moveable emplace can skip a potentially
expensive move. It also saves a couple of characters.
Call sites were found with the ASTMatcher + some semi-automated cleanup.
memberCallExpr(
argumentCountIs(1), callee(methodDecl(hasName("push_back"))),
on(hasType(recordDecl(has(namedDecl(hasName("emplace_back")))))),
hasArgument(0, bindTemporaryExpr(
hasType(recordDecl(hasNonTrivialDestructor())),
has(constructExpr()))),
unless(isInTemplateInstantiation()))
No functional change intended.
llvm-svn: 238601
in-progress implementation of the Concepts TS. The recommended feature
test macro __cpp_experimental_concepts is set to 1 (as opposed to
201501) to indicate that the feature is enabled, but the
implementation is incomplete.
The link to the Concepts TS in cxx_status is updated to refer to the
PDTS (N4377). Additional changes related to __has_feature and
__has_extension are to follow in a later change.
Relevant tests include:
test/Lexer/cxx-features.cpp
The test file is updated with testing of the C++14 + Concepts TS mode.
The expected behaviour is the same as that of the C++14 modes except
for the case of __cpp_experimental_concepts."
- Hubert Tong.
Being committed for Hubert (as per his understanding with Richard Smith) as we start work on the concepts-ts following our preliminary strategy session earlier today.
The patch is tiny and seems quite standard.
Thanks Hubert!
llvm-svn: 237982
-fopenmp turns on OpenMP support and links libiomp5 as OpenMP library. Also there is -fopenmp={libiomp5|libgomp} option that allows to override effect of -fopenmp and link libgomp library (if -fopenmp=libgomp is specified).
Differential Revision: http://reviews.llvm.org/D9736
llvm-svn: 237769
With this change, enabling -fmodules-local-submodule-visibility results in name
visibility rules being applied to submodules of the current module in addition
to imported modules (that is, names no longer "leak" between submodules of the
same top-level module). This also makes it much safer to textually include a
non-modular library into a module: each submodule that textually includes that
library will get its own "copy" of that library, and so the library becomes
visible no matter which including submodule you import.
llvm-svn: 237473
Summary:
r235215 enables support in LLVM for legalizing f16 type in the IR. AArch64
already had support for this. r235215 and some backend patches brought support
for ARM, X86, X86-64, Mips and Mips64.
This change exposes the LangOption 'NativeHalfType' in the command line, so the
backend legalization can be used if desired. NativeHalfType is enabled for
OpenCL (current behavior) or if '-fnative-half-type' is set.
Reviewers: olista01, steven_wu, ab
Subscribers: cfe-commits, srhines, aemerson
Differential Revision: http://reviews.llvm.org/D9781
llvm-svn: 237406
Backslash followed by # in a filename should have both characters
escaped, if you do it the way GNU Make wants. GCC doesn't, so we do
it the way GCC does rather than the way GNU Make wants.
llvm-svn: 237304
Previously we were setting LangOptions::GNUInline (which controls whether we
use traditional GNU inline semantics) if the language did not have the C99
feature flag set. The trouble with this is that C++ family languages also
do not have that flag set, so we ended up setting this flag in C++ modes
(and working around it in a few places downstream by also checking CPlusPlus).
The fix is to check whether the C89 flag is set for the target language,
rather than whether the C99 flag is cleared. This also lets us remove most
CPlusPlus checks. We continue to test CPlusPlus when deciding whether to
pre-define the __GNUC_GNU_INLINE__ macro for consistency with GCC.
There is a change in semantics in two other places
where we weren't checking both CPlusPlus and GNUInline
(FunctionDecl::doesDeclarationForceExternallyVisibleDefinition and
FunctionDecl::isInlineDefinitionExternallyVisible), but this change seems to
put us back into line with GCC's semantics (test case: test/CodeGen/inline.c).
While at it, forbid -fgnu89-inline in C++ modes, as GCC doesn't support it,
it didn't have any effect before, and supporting it just makes things more
complicated.
Differential Revision: http://reviews.llvm.org/D9333
llvm-svn: 237299
When writing a dependency (.d) file, if space or # is immediately
preceded by one or more backslashes, escape the backslashes as well as
the space or # character. Otherwise leave backslash alone.
This straddles the fence between BSD Make (which does no escaping at
all, and does not support space or # in filespecs) and GNU Make (which
does support escaping, but will fall back to the filespec as-written
if the escaping doesn't match an existing file).
Differential Revision: http://reviews.llvm.org/D9208
llvm-svn: 237296
- added -fcuda-include-gpubinary option to incorporate results of
device-side compilation into host-side one.
- generate code to register GPU binaries and associated kernels
with CUDA runtime and clean-up on exit.
- added test case for init/deinit code generation.
Differential Revision: http://reviews.llvm.org/D9507
llvm-svn: 236765
Summary:
The next step is to add user-friendly control over these options
to driver via -fsanitize-coverage= option.
Test Plan: regression test suite
Reviewers: kcc
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D9545
llvm-svn: 236756
This reverts commit r236422, effectively reapplying r236419. ASan
helped me diagnose the problem: the non-leaking logic would free the
ASTConsumer before freeing Sema whenever `isCurrentASTFile()`, causing a
use-after-free in `Sema::~Sema()`.
This version unconditionally frees Sema and the ASTContext before
freeing the ASTConsumer. Without the fix, these were either being freed
before the ASTConsumer was freed or leaked after, but they were always
spiritually released so this isn't really a functionality change.
I ran all of check-clang with ASan locally this time, so I'm hoping
there aren't any more problems lurking.
Original commit message:
Try again to plug a leak that's been around since at least r128011
after coming across the FIXME. Nico Weber tried something similar
in r207065 but had to revert in r207070 due to a bot failure.
The build failure isn't visible anymore so I'm not sure what went
wrong. I'm doing this slightly differently -- when not
-disable-free I'm still resetting the members (just not leaking
them) -- so maybe it will work out this time? Tests pass locally,
anyway.
llvm-svn: 236424
Try again to plug a leak that's been around since at least r128011 after
coming across the FIXME. Nico Weber tried something similar in r207065
but had to revert in r207070 due to a bot failure.
The build failure isn't visible anymore so I'm not sure what went wrong.
I'm doing this slightly differently -- when not -disable-free I'm still
resetting the members (just not leaking them) -- so maybe it will work
out this time? Tests pass locally, anyway.
llvm-svn: 236419
clang::MacroDefinition now models the currently-defined value of a macro. The
previous MacroDefinition type, which represented a record of a macro definition
directive for a detailed preprocessing record, is now called MacroDefinitionRecord.
llvm-svn: 236400
This flag specifies that the normal visibility rules should be used even for
local submodules (submodules of the currently-being-built module). Thus names
will only be visible if a header / module that declares them has actually been
included / imported, and not merely because a submodule that happened to be
built earlier declared those names. This also removes the need to modularize
bottom-up: textually-included headers will be included into every submodule
that includes them, since their include guards will not leak between modules.
So far, this only governs visibility of macros, not of declarations, so is not
ready for real use yet.
llvm-svn: 236350
It has no place there; it's not a property of the Module, and it makes
restoring the visibility set when we leave a submodule more difficult.
llvm-svn: 236300
This change is the third of 3 patches to add support for specifying
the profile output from the command line via -fprofile-instr-generate=<path>,
where the specified output path/file will be overridden by the
LLVM_PROFILE_FILE environment variable.
This patch adds the necessary support to the clang frontend, and adds a
new test.
The compiler-rt and llvm parts are r236055 and r236288, respectively.
Patch by Teresa Johnson. Thanks!
llvm-svn: 236289
Modules builds fundamentally have a non-linear macro history. In the interest
of better source fidelity, represent the macro definition information
faithfully: we have a linear macro directive history within each module, and at
any point we have a unique "latest" local macro directive and a collection of
visible imported directives. This also removes the attendent complexity of
attempting to create a correct MacroDirective history (which we got wrong
in the general case).
No functionality change intended.
llvm-svn: 236176
ability to generate code that CodeGen likes. Test
cases can use this functionality by calling
// RUN: %clang_cc1 -emit-obj -o /dev/null -ast-merge %t.1.ast -ast-merge %t.2.ast %s
llvm-svn: 236011
NMake is a Make-like builder that comes with Microsoft Visual Studio.
Jom (https://wiki.qt.io/Jom) is an NMake-compatible build tool.
Dependency files for NMake/Jom need to use double-quotes to wrap
filespecs containing special characters, instead of the backslash
escapes that GNU Make wants.
Adds the -MV option, which specifies to use double-quotes as needed
instead of backslash escapes when writing the dependency file.
Differential Revision: http://reviews.llvm.org/D9260
llvm-svn: 235903
Previously we'd defer this determination until writing the AST, which doesn't
allow us to use this information when building other submodules of the same
module. This change also allows us to use a uniform mechanism for writing
module macro records, independent of whether they are local or imported.
llvm-svn: 235614
David Blaikie