At AMD, in an internal audit of our code, we found some corner cases
where we were not quite differentiating targets enough for some old
hardware. This commit is part of fixing that by adding three new
targets:
* The "Oland" and "Hainan" variants of gfx601 are now split out into
gfx602. LLPC (in the GPUOpen driver) and other front-ends could use
that to avoid using the shaderZExport workaround on gfx602.
* One variant of gfx703 is now split out into gfx705. LLPC and other
front-ends could use that to avoid using the
shaderSpiCsRegAllocFragmentation workaround on gfx705.
* The "TongaPro" variant of gfx802 is now split out into gfx805.
TongaPro has a faster 64-bit shift than its former friends in gfx802,
and a subtarget feature could be set up for that to take advantage of
it. This commit does not make that change; it just adds the target.
V2: Add clang changes. Put TargetParser list in order.
V3: AMDGCNGPUs table in TargetParser.cpp needs to be in GPUKind order,
so fix the GPUKind order.
Differential Revision: https://reviews.llvm.org/D88916
Change-Id: Ia901a7157eb2f73ccd9f25dbacec38427312377d
This patch makes the opcode_base and the standard_opcode_lengths fields
of the line table optional. When both of them are not specified,
yaml2obj emits them according to the line table's version.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D88355
The `Group` class represents a group section and it is
named inconsistently with other sections which all has
the "Section" suffix. It is sometimes confusing,
this patch addresses the issue.
Differential revision: https://reviews.llvm.org/D88892
Specification for SHT_HASH table says (https://refspecs.linuxbase.org/elf/gabi4+/ch5.dynamic.html#hash)
that it contains Elf32_Word entries for both 32/64 bit objects.
Currently both GNU linkers and LLD sets the `sh_entsize` field to `4`.
At the same time, `yaml2obj` ignores the `EntSize` field for SHT_HASH sections.
This patch fixes this and also adds a support for obj2yaml: it will not
dump this field when the `sh_entsize` contains the default value (`4`).
Differential revision: https://reviews.llvm.org/D88652
Currently we are always recognizing the `SHT_MIPS_ABIFLAGS` section,
even on non-MIPS targets.
The problem of doing this is briefly discussed in D88228 which does the same for `SHT_ARM_EXIDX`:
"The problem is that `SHT_ARM_EXIDX` shares the value with `SHT_X86_64_UNWIND (0x70000001U)`.
We might have other machine specific conflicts, e.g.
`SHT_ARM_ATTRIBUTES` vs `SHT_MSP430_ATTRIBUTES` vs `SHT_RISCV_ATTRIBUTES (0x70000003U)`."
I think we should only recognize target specific sections when the machine type
matches. I.e. `SHT_MIPS_*` should be recognized only on `MIPS`, `SHT_ARM_*`
only on `ARM` etc.
This patch stops recognizing `SHT_MIPS_ABIFLAGS` on `non-MIPS` targets.
Note: I had to update `ScalarEnumerationTraits<ELFYAML::MIPS_ISA>::enumeration`, because
otherwise test crashes, calling `llvm_unreachable`.
Differential revision: https://reviews.llvm.org/D88294
This patch makes the 'ExtLen' field of extended opcodes optional. We
don't need to manually calculate it in the future.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D88136
This patch makes the include_directories, file_names and opcodes fields
of the line table optional. This helps us simplify some tests.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D87878
This patch makes the debug_ranges section optional. When we specify an
empty debug_ranges section, yaml2obj only emits the section header.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D87263
This patch makes the debug_addr section optional. When an empty
debug_addr section is specified, yaml2obj only emits a section header
for it.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D87205
This is the split part of D86269, which add a new ELF machine flag called EM_CSKY and related relocations.
Some target-specific flags and tests for csky can be added in follow-up patches later.
Differential Revision: https://reviews.llvm.org/D86610
This patch enables users to handcraft custom contents for DWARF
sections. If we specify the contents of DWARF sections both in the
'DWARF' entry and the 'content', yaml2obj will emit an error message.
In addition, this patch helps remove the restriction that only the
content of sections whose segname are __DWARF can be specified in the
"DWARF" entry.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D87126
This patch makes the debug_str section optional. When the debug_str
section exists but doesn't contain anything, yaml2obj will emit a
section header for it.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D86860
This patch helps make the debug_abbrev_offset field optional. We don't
need to calculate the value of this field in the future.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D86614
The abbrev codes in a new abbrev table should start from 1 (by default),
rather than inherit the value from the code in the previous table.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D86545
This patch makes the unit_length and header_length fields of line tables
optional. yaml2obj is able to infer them for us.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D86590
This patch makes the 'Attributes' field optional. We don't need to
explicitly specify the 'Attributes' field in the future.
Reviewed By: jhenderson, grimar
Differential Revision: https://reviews.llvm.org/D86537
The original commit (7ff0ace96db9164dcde232c36cab6519ea4fce8) was causing
build failure and was reverted in 6d242a7326
==================== Original Commit Message ====================
This patch adds support for referencing different abbrev tables. We use
'ID' to distinguish abbrev tables and use 'AbbrevTableID' to explicitly
assign an abbrev table to compilation units.
The syntax is:
```
debug_abbrev:
- ID: 0
Table:
...
- ID: 1
Table:
...
debug_info:
- ...
AbbrevTableID: 1 ## Reference the second abbrev table.
- ...
AbbrevTableID: 0 ## Reference the first abbrev table.
```
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83116
This patch adds support for referencing different abbrev tables. We use
'ID' to distinguish abbrev tables and use 'AbbrevTableID' to explicitly
assign an abbrev table to compilation units.
The syntax is:
```
debug_abbrev:
- ID: 0
Table:
...
- ID: 1
Table:
...
debug_info:
- ...
AbbrevTableID: 1 ## Reference the second abbrev table.
- ...
AbbrevTableID: 0 ## Reference the first abbrev table.
```
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83116
This patch adds support for emitting multiple abbrev tables. Currently,
compilation units will always reference the first abbrev table.
Reviewed By: jhenderson, labath
Differential Revision: https://reviews.llvm.org/D86194
Currently we have to set 'Machine' to something in our
YAML descriptions. Usually we use 'EM_X86_64' for 64-bit targets
and 'EM_386' for 32-bit targets. At the same time, in fact, in most
cases our tests do not need a machine type and we can use
'EM_NONE'.
This is cleaner, because avoids the need of using a particular machine.
In this patch I've made the 'Machine' key optional (the default value,
when it is not specified is `EM_NONE`) and removed it (where possible)
from yaml2obj, obj2yaml and llvm-readobj tests.
There are few tests left where I decided not to remove it, because
I didn't want to touch CHECK lines or doing anything more complex
than a removing a "Machine: *" line and formatting lines around.
Differential revision: https://reviews.llvm.org/D86202
We currently call the `llvm_unreachable` for the following YAML:
```
--- !ELF
FileHeader:
Class: ELFCLASS32
Data: ELFDATA2LSB
Type: ET_REL
Machine: EM_NONE
Flags: [ ]
```
it happens because the `Flags` key is present, though `EM_NONE` is a
machine type that has no known `EF_*` values and we call `llvm_unreachable` by mistake.
Differential revision: https://reviews.llvm.org/D86138
This change replaces the InitialLength of pub-tables with Format and
Length. All the InitialLength fields have been removed.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85880
This patch makes the 'AddrSize' field optional. If the address size is
missing, yaml2obj will infer it from the object file.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85805
The following issues are addressed in this patch.
1. The operands of DW_LNE_set_discriminator should be an ULEB128 number
rather than an address.
2. Test the emitted opcodes.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85717
Currently, the line table uses the first compilation unit's address size
as its address size. It's not the right behavior. The address size should be
inferred from the target machine.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85707
This patch refactors the DWARF section dumpers. When dumping a DWARF
section, if the DWARF parser fails to parse the section, we will dump it
as a raw content section. This patch also fixes a bug in
DWARFYAML::Data::isEmpty(). Finally, a test case that tests dumping the
__debug_aranges section is added.
Reviewed By: jhenderson, grimar
Differential Revision: https://reviews.llvm.org/D85506
This patch makes the 'Values' field optional. This is useful when we
handcraft the terminating entry of DIEs.
```
debug_info:
- Version: 4
...
Entries:
- AbbrCode: 1
Values:
- Value: 0x1234
- AbbrCode: 0 ## Termination
```
Reviewed By: jhenderson, grimar
Differential Revision: https://reviews.llvm.org/D85397
Unit.Format, Unit.Version and Unit.AddrSize are replaced with
dwarf::FormParams in D84496 to get rid of unnecessary functions
getOffsetSize() and getRefSize(). However, that change makes it
difficult to make AddrSize optional (Optional<uint8_t>). This change
pulls out dwarf::FormParams from DWARFYAML::Unit and use it as a helper
struct in DWARFYAML::emitDebugInfo().
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D85296
The offsets field should be omitted when the 'OffsetEntryCount' entry is
specified to be 0.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85006
This patch makes the 'debug_aranges' entry optional. If the entry is
empty, yaml2obj will only emit the header for it.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D84921
In this patch, we add a helper function getDWARFEmitterByName(). This
function returns the proper DWARF section emitting method by the name.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D84952
In this patch, emitDebugPubnames(), emitDebugPubtypes(),
emitDebugGNUPubnames(), emitDebugGNUPubtypes() are added.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85003
This patch makes the 'Length' field of the address range table optional.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D84911
This patch makes the 'AddressSize' and 'SegmentSelectorSize' fields of
address range table optional.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D84907
Tim Renouf