Select the following:
- G_SELECT cc, 0, 1 -> CSINC zreg, zreg, cc
- G_SELECT cc 0, -1 -> CSINV zreg, zreg cc
- G_SELECT cc, 1, f -> CSINC f, zreg, inv_cc
- G_SELECT cc, -1, f -> CSINV f, zreg, inv_cc
- G_SELECT cc, t, 1 -> CSINC t, zreg, cc
- G_SELECT cc, t, -1 -> CSINC t, zreg, cc
(IR example: https://godbolt.org/z/YfPna9)
These correspond to a bunch of the AArch64csel patterns in AArch64InstrInfo.td.
Unfortunately, it doesn't seem like we can import patterns that use NZCV like
those ones do. E.g.
```
def : Pat<(AArch64csel GPR32:$tval, (i32 1), (i32 imm:$cc), NZCV),
(CSINCWr GPR32:$tval, WZR, (i32 imm:$cc))>;
```
So we have to manually select these for now.
This replaces `selectSelectOpc` with an `emitSelect` function, which performs
these optimizations.
Differential Revision: https://reviews.llvm.org/D90701
Also fix a similar issue in SIInsertWaitcnts, but I don't think that fix
has any effect in practice.
Differential Revision: https://reviews.llvm.org/D91290
The fshl and fshr intrinsics are defined to modulo their shift amount by the bitwidth of one of their inputs. The FSR/FSL instructions read one extra bit from the shift amount. If that bit is set the inputs are swapped. In order to preserve the semantics of the llvm intrinsics we need to make sure that the extra bit isn't set. DAG combine or instcombine may have removed any mask that was originally present.
We could be smarter here and try to use computeKnownBits to check if the bit is known zero, but wanted to start with correctness.
Differential Revision: https://reviews.llvm.org/D90905
Of course there was something missing, in this case a check that the def
of the count register we are adding to a t2DoLoopStartTP would dominate
the insertion point.
In the future, when we remove some of these COPY's in between, the
t2DoLoopStartTP will always become the last instruction in the block,
preventing this from happening. In the meantime we need to check they
are created in a sensible order.
Differential Revision: https://reviews.llvm.org/D91287
Change the default type of v64 register class from v512i32 to v256f64.
Add a regression test also.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D91301
When passing SVE types as arguments to function calls we can run
out of hardware SVE registers. This is normally fine, since we
switch to an indirect mode where we pass a pointer to a SVE stack
object in a GPR. However, if we switch over part-way through
processing a SVE tuple then part of it will be in registers and
the other part will be on the stack.
I've fixed this by ensuring that:
1. When we don't have enough registers to allocate the whole block
we mark any remaining SVE registers temporarily as allocated.
2. We temporarily remove the InConsecutiveRegs flags from the last
tuple part argument and reinvoke the autogenerated calling
convention handler. Doing this prevents the code from entering
an infinite recursion and, in combination with 1), ensures we
switch over to the Indirect mode.
3. After allocating a GPR register for the pointer to the tuple we
then deallocate any SVE registers we marked as allocated in 1).
We also set the InConsecutiveRegs flags back how they were before.
4. I've changed the AArch64ISelLowering LowerCALL and
LowerFormalArguments functions to detect the start of a tuple,
which involves allocating a single stack object and doing the
correct numbers of legal loads and stores.
Differential Revision: https://reviews.llvm.org/D90219
Some targets may add required passes via
TargetMachine::registerPassBuilderCallbacks(). We need to run those even
under -O0. As an example, BPFTargetMachine adds
BPFAbstractMemberAccessPass, a required pass.
This also allows us to clean up BackendUtil.cpp (and out-of-tree Rust
usage of the NPM) by allowing us to share added passes like coroutines
and sanitizers between -O0 and other optimization levels.
Since callbacks may end up not adding passes, we need to check if the
pass managers are empty before adding them, so PassManager now has an
isEmpty() function. For example, polly adds callbacks but doesn't always
add passes in those callbacks, so this is necessary to keep
-debug-pass-manager tests' output from changing depending on if polly is
enabled or not.
Tests are a continuation of those added in
https://reviews.llvm.org/D89083.
Reviewed By: asbirlea, Meinersbur
Differential Revision: https://reviews.llvm.org/D89158
When there is full fp16 support, there is no reason to widen 16-bit
G_FCONSTANTs to 32 bits. Mark them as legal in this case.
Also, we currently import a pattern for materializing a 16-bit 0.0.
Add a testcase showing we select it.
(All other 16-bit G_FCONSTANTS are not yet selected.)
Differential Revision: https://reviews.llvm.org/D89164
The manual selection code for add/sub was not checking if it was possible to
fold in shifts + extends (the *rx opcode variants).
As a result, we could never select things like
```
cmp x1, w0, uxtw #2
```
Because we don't import any patterns for compares.
This adds support for the arithmetic shifted register forms and updates tests
for instructions selected using `emitADD`, `emitADDS`, and `emitSUBS`.
This is a 0.1% geomean code size improvement on SPECINT2000 at -Os.
Differential Revision: https://reviews.llvm.org/D91207
Previously, we only handled negative arithmetic immediates in the imported
selector code.
Since we don't import code for, say, compares, we were missing opportunities
for things like
```
%cst:gpr(s64) = G_CONSTANT i64 -10
%cmp:gpr(s32) = G_ICMP intpred(eq), %reg0(s64), %cst
->
%adds = ADDSXri %reg0, 10, 0, implicit-def $nzcv
%cmp = CSINCWr $wzr, $wzr, 1, implicit $nzcv
```
Instead, we would have to materialize the constant and emit a SUBS.
This adds support for selection like above for SUB, SUBS, ADD, and ADDS.
This is a 0.1% geomean code size improvement on SPECINT2000 at -Os.
Differential Revision: https://reviews.llvm.org/D91108
This broke both Firefox and Chromium (PR47905) due to what seems like dllimport
function not being handled correctly.
> This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
> Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
>
> Reviewed By: rnk
>
> Differential Revision: https://reviews.llvm.org/D87544
This reverts commit cfd8481da1.
Lowers the llvm.masked.scatter intrinsics (scalar plus vector addressing mode only)
Changes included in this patch:
- Custom lowering for MSCATTER, which chooses the appropriate scatter store opcode to use.
Floating-point scatters are cast to integer, with patterns added to match FP reinterpret_casts.
- Added the getCanonicalIndexType function to convert redundant addressing
modes (e.g. scaling is redundant when accessing bytes)
- Tests with 32 & 64-bit scaled & unscaled offsets
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D90941
These do things like turn a multiply of a pow-2+1 into a shift and and add,
which is a common pattern that pops up, and is universally better than expensive
madd instructions with a constant.
I've added check lines to an existing codegen test since the code being ported
is almost identical, however the mul by negative pow2 constant tests don't generate
the same code because we're missing some generic G_MUL combines still.
Differential Revision: https://reviews.llvm.org/D91125
Previously we used setRegClass to rgpr, which may expand the register
domain if the result was already in a constrained class (tcgpr in the
above PR).
Differential Revision: https://reviews.llvm.org/D91192
This introduces a new pseudo instruction, almost identical to a
t2DoLoopStart but taking 2 parameters - the original loop iteration
count needed for a low overhead loop, plus the VCTP element count needed
for a DLSTP instruction setting up a tail predicated loop. The idea is
that the instruction holds both values and the backend
ARMLowOverheadLoops pass can pick between the two, depending on whether
it creates a tail predicated loop or falls back to a low overhead loop.
To do that there needs to be something that converts a t2DoLoopStart to
a t2DoLoopStartTP, for which this patch repurposes the
MVEVPTOptimisationsPass as a "tail predication and vpt optimisation"
pass. The extra operand for the t2DoLoopStartTP is chosen based on the
operands of VCTP's in the loop, and the instruction is moved as late in
the block as possible to attempt to increase the likelihood of making
tail predicated loops.
Differential Revision: https://reviews.llvm.org/D90591
This hints the operand of a t2DoLoopStart towards using LR, which can
help make it more likely to become t2DLS lr, lr. This makes it easier to
move if needed (as the input is the same as the output), or potentially
remove entirely.
The hint is added after others (from COPY's etc) which still take
precedence. It needed to find a place to add the hint, which currently
uses the post isel custom inserter.
Differential Revision: https://reviews.llvm.org/D89883
This changes the definition of t2DoLoopStart from
t2DoLoopStart rGPR
to
GPRlr = t2DoLoopStart rGPR
This will hopefully mean that low overhead loops are more tied together,
and we can more reliably generate loops without reverting or being at
the whims of the register allocator.
This is a fairly simple change in itself, but leads to a number of other
required alterations.
- The hardware loop pass, if UsePhi is set, now generates loops of the
form:
%start = llvm.start.loop.iterations(%N)
loop:
%p = phi [%start], [%dec]
%dec = llvm.loop.decrement.reg(%p, 1)
%c = icmp ne %dec, 0
br %c, loop, exit
- For this a new llvm.start.loop.iterations intrinsic was added, identical
to llvm.set.loop.iterations but produces a value as seen above, gluing
the loop together more through def-use chains.
- This new instrinsic conceptually produces the same output as input,
which is taught to SCEV so that the checks in MVETailPredication are not
affected.
- Some minor changes are needed to the ARMLowOverheadLoop pass, but it has
been left mostly as before. We should now more reliably be able to tell
that the t2DoLoopStart is correct without having to prove it, but
t2WhileLoopStart and tail-predicated loops will remain the same.
- And all the tests have been updated. There are a lot of them!
This patch on it's own might cause more trouble that it helps, with more
tail-predicated loops being reverted, but some additional patches can
hopefully improve upon that to get to something that is better overall.
Differential Revision: https://reviews.llvm.org/D89881
Jessica Paquette