This is a follow-up to r331272.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
https://reviews.llvm.org/D46290
llvm-svn: 331275
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
LLVM_ON_WIN32 is set exactly with MSVC and MinGW (but not Cygwin) in
HandleLLVMOptions.cmake, which is where _WIN32 defined too. Just use the
default macro instead of a reinvented one.
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
No intended behavior change.
This moves over all uses of the macro, but doesn't remove the definition
of it in (llvm-)config.h yet.
llvm-svn: 331127
The main goal of this change is to make it much easier to track which
rules are actually covered by Testgen'erated regression tests.
Reviewers: aemerson, dsanders
Differential Revision: https://reviews.llvm.org/D46095
llvm-svn: 330988
Several tools prefix the error/warning/note output with the name of the
tool. One such tool is LLD for example. This commit adds as an optional
'Prefix' argument to the convenience helpers.
llvm-svn: 330526
Three new instructions:
umonitor - Sets up a linear address range to be
monitored by hardware and activates the monitor.
The address range should be a writeback memory
caching type.
umwait - A hint that allows the processor to
stop instruction execution and enter an
implementation-dependent optimized state
until occurrence of a class of events.
tpause - Directs the processor to enter an
implementation-dependent optimized state
until the TSC reaches the value in EDX:EAX.
Also modifying the description of the mfence
instruction, as the rep prefix (0xF3) was allowed
before, which would conflict with umonitor during
disassembly.
Before:
$ echo 0xf3,0x0f,0xae,0xf0 | llvm-mc -disassemble
.text
mfence
After:
$ echo 0xf3,0x0f,0xae,0xf0 | llvm-mc -disassemble
.text
umonitor %rax
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D45253
llvm-svn: 330462
Path.inc/widenPath tries to decode the path using both UTF-8 and the default Windows code page.
This is no longer necessary with the new InitLLVM method which ensures that the command line
arguemnts are already UTF-8 on Windows.
llvm-svn: 330266
Summary:
Due to some android peculiarities, in some build configurations
(statically linked executables targeting older releases) we could detect
the presence of these functions (because they are present in libc.a,
where check_library_exists searches), but then fail to build because the
headers did not include the definition.
This attempts to remedy that by upgrading the check_library_exists to
check_symbol_exists, which will check that the function is declared too.
I am hoping that a more thorough check will make the messy #ifdef we
have accumulated in the code obsolete, so I optimistically try to remove
them.
Reviewers: zturner, kparzysz, danalbert
Subscribers: srhines, mgorny, krytarowski, llvm-commits
Differential Revision: https://reviews.llvm.org/D45359
llvm-svn: 330251
Summary:
Statistic and ManagedStatic both use mutexes. There was a lock order
inversion where, during initialization, Statistic's mutex would be
held while taking ManagedStatic's, and in llvm_shutdown,
ManagedStatic's mutex would be held while taking Statistic's
mutex. This change causes Statistic's initialization code to avoid
holding its mutex while calling ManagedStatic's methods, avoiding the
inversion.
Reviewers: dsanders, rtereshin
Reviewed By: dsanders
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D45398
llvm-svn: 330236
GetArgumentVector (or GetCommandLineArguments) is very Windows-specific.
I think it doesn't make much sense to provide that function from sys::Process.
I also made a change so that the function takes a BumpPtrAllocator
instead of a SpecificBumpPtrAllocator. The latter is the class to call
dtors, but since char * is trivially destructible, we should use the
former class.
Differential Revision: https://reviews.llvm.org/D45641
llvm-svn: 330216
Using Goldmont's cost tables for these two upcoming
atom archs.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45612
llvm-svn: 330109
Summary: As discussed in https://reviews.llvm.org/D45606, it makes more sense to name the class as SmallVectorMemoryBuffer
Reviewers: bkramer, dblaikie
Reviewed By: dblaikie
Subscribers: mehdi_amini, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D45661
llvm-svn: 330107
Summary:
Since the class is used by both MCJIT and LTO, it makes more sense to move it to Support lib.
This is a follow up patch to r329929 and https://reviews.llvm.org/D45244
Reviewers: bkramer, dblaikie
Reviewed By: bkramer
Subscribers: mehdi_amini, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D45606
llvm-svn: 330093
Create convenience functions for printing error, warning and note to
stdout. Previously we had similar functions being used in dsymutil, but
given that this pattern is so common it makes sense to make it available
globally.
llvm-svn: 330091
We have a few functions that virtually all command wants to run on
process startup/shutdown. This patch adds InitLLVM class to do that
all at once, so that we don't need to copy-n-paste boilerplate code
to each llvm command's main() function.
Differential Revision: https://reviews.llvm.org/D45602
llvm-svn: 330046
Hint to hardware to move the cache line containing the
address to a more distant level of the cache without
writing back to memory.
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D45256
llvm-svn: 329992
The commit in SVN r310001 that added support for this actually didn't
use the right struct field for the frame pointer - for ARM, there is
no register named Fp in the CONTEXT struct. On Windows, the R11
register is used as frame pointer.
Differential Revision: https://reviews.llvm.org/D45590
llvm-svn: 329991
Similar to the wbinvd instruction, except this
one does not invalidate caches. Ring 0 only.
The encoding matches a wbinvd instruction with
an F3 prefix.
Reviewers: craig.topper, zvi, ashlykov
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D43816
llvm-svn: 329847
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: chandlerc, jordan_rose, bkramer
Reviewed By: bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45140
llvm-svn: 329536
Summary:
The LLVM SourceMgr class (which is used indirectly by Swift, though not Clang)
has a routine for looking up line numbers of SMLocs. This routine uses a
shared, special-purpose cache that handles exactly one access pattern
efficiently: looking up the line number of an SMLoc that points into the same
buffer as the last query made to the SourceMgr, at a location in the buffer at
or ahead of the last query.
When this works it's fine, but when it fails it's catastrophic for performancer:
one recent out-of-order access from a Swift utility routine ran for tens of
seconds, spending 99% of its time repeatedly scanning buffers for '\n'.
This change removes the shared cache from the SourceMgr and installs a new
cache in each SrcBuffer. The per-SrcBuffer caches are also "full", in the sense
that rather than caching a single last-query pointer, they cache _all_ the
line-ending offsets, in a binary-searchable array, such that once it's
populated (on first access), all subsequent access patterns run at the same
speed.
Performance measurements I've done show this is actually a little bit faster on
real codebases (though only a couple fractions of a percent). Memory usage is
up by a few tens to hundreds of bytes per SrcBuffer that has a line lookup done
on it; I've attempted to minimize this by using dynamic selection of integer
sized when storing offset arrays. But the main motive here is to
make-impossible the cases we don't always see, that show up by surprise when
there is an out-of-order access pattern.
Reviewers: jordan_rose
Reviewed By: jordan_rose
Subscribers: probinson, llvm-commits
Differential Revision: https://reviews.llvm.org/D45003
llvm-svn: 329470
Llvm-mc (and tools that use Path.inc on Windows) assume that strings are utf-8
encoded, however, this is not always the case. On Windows the default codepage
is not utf-8, so most of the time the strings are not utf-8 encoded.
The lld test 'format-binary-non-ascii' uses llvm-mc with a file with non-ascii
characters in the name which is how this bug was found. The test fails when run
using Python 3 because it uses properly encoded unicode strings (Python 2 actually
ends up using a byte string which is not utf-8 encoded, so the test passes, but
that's separate issue).
Patch by Stella Stamenova!
llvm-svn: 329468
The implementation of shadow call stack on aarch64 is quite different to
the implementation on x86_64. Instead of reserving a segment register for
the shadow call stack, we reserve the platform register, x18. Any function
that spills lr to sp also spills it to the shadow call stack, a pointer to
which is stored in x18.
Differential Revision: https://reviews.llvm.org/D45239
llvm-svn: 329236
These used to be set in the old autoconf build, but the cmake build has had a
"TODO: actually check for these" comment since it was checked in, and they
were set to 1 on mingw unconditionally. It seems safe to say that they always
exist under mingw, so just remove them and assume they're set exactly when on
mingw (with msvc, we use `pragma comment` instead of linking these via flags).
llvm-svn: 328992
The autoconf manual: "This macro is obsolescent, as all current systems with
directory libraries have <dirent.h>. New programs need not use this macro."
llvm-svn: 328989
The existing YAML Output::scalarString code path includes a partial and
incorrect implementation of YAML escaping logic. In particular, the logic put
in place in rL321283 escapes non-printable bytes only if they are not part of a
multibyte UTF8 sequence; implicitly this means that all multibyte UTF8
sequences -- printable and non -- are passed through verbatim.
The simplest solution to this is to direct the Output::scalarString method to
use the standalone yaml::escape function, and this _almost_ works, except that
the existing code in that function _over_ escapes: any multibyte UTF8 sequence
is escaped, even printable ones. While this is permitted for YAML, it is also
more aggressive (and hard to read for non-English locales) than necessary,
and the entire point of rL321283 was to back off such aggressive over-escaping.
So in this change, I have both redirected Output::scalarString to use
yaml::escape _and_ modified yaml::escape to optionally restrict its escaping to
non-printables. This preserves behaviour of any existing clients while giving
them a path to more moderate escaping should they desire.
Reviewers: JDevlieghere, thegameg, MatzeB, vladimir.plyashkun
Reviewed By: thegameg
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44863
llvm-svn: 328661
- Remove use of the opencl and amdopencl environment member of the target triple for the AMDGPU target.
- Use function attribute to communicate to the AMDGPU backend to add implicit arguments for OpenCL kernels for the AMDHSA OS.
Differential Revision: https://reviews.llvm.org/D43736
llvm-svn: 328349
Summary:
This commit changes semantics of createUniqueFile and
createTemporaryFile variants that do not return file descriptors.
Previously they only checked if files exist, therefore being subject
to race conditions. Now they will create an empty file to avoid them.
Functions that do not create a file are now called
getPotentiallyUniqueTempFileName and getPotentiallyUniqueFileName.
Reviewers: klimek, bkramer, krasimir, JDevlieghere, espindola
Reviewed By: klimek
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36827
llvm-svn: 327851
After r327219 was landed, the bot with expensive checks on GreenDragon
started failing. The problem was missing symbols `regex_t` and
`regmatch_t` in `xlocale/_regex.h`. The latter was included because
after the change in r327219, `random` is needed, which transitively
includes `xlocale.h.` which in turn conditionally includes
`xlocale/_regex.h` when _REGEX_H_ is defined. Because this is the header
guard in `regex_impl.h` and because `regex_impl.h` was included before
the other LLVM includes, `xlocale/_regex.h` was included without the
necessary types being available.
This commit fixes this by moving the include of `regex_impl.h` all the
way down. I also added a comment to stress the significance of its
position.
llvm-svn: 327256
Move the DWARF syntax highlighting into support. This has several
advantages, most notably that this makes the WithColor RAII wrapper
available outside libDebugInfo. Furthermore, several projects all have
their own code for handling colored output. This provides a place to
centralize it.
Differential revision: https://reviews.llvm.org/D44215
llvm-svn: 327108
This is like MemoryBuffer (read-only) and WritableMemoryBuffer
(writable private), but where the underlying file can be modified
after writing. This is useful when you want to open a file, make
some targeted edits, and then write it back out.
Differential Revision: https://reviews.llvm.org/D44230
llvm-svn: 327057
Summary:
Most of the time, compiler statistics can be obtained using a process that
performs a single compilation and terminates such as llc. However, this isn't
always the case. JITs for example, perform multiple compilations over their
lifetime and STATISTIC() will record cumulative values across all of them.
Provide tools like this with the facilities needed to measure individual
compilations by allowing them to reset the STATISTIC() values back to zero using
llvm::ResetStatistics(). It's still the tools responsibility to ensure that they
perform compilations in such a way that the results are meaningful to their
intended use.
Reviewers: qcolombet, rtereshin, bogner, aditya_nandakumar
Reviewed By: bogner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44181
llvm-svn: 326981
I think most of the Intel Core CPUs and recent AMD CPUs are unaffected. All the CPUs that have a "subtype" should work. The ones that were broken are the ones that are a "type" with no subtypes.
Fixes PR36619.
llvm-svn: 326840
These two functions iterate over the list of statistics but don't take the lock
that protects the iterators from being invalidated by
StatisticInfo::addStatistic().
So far, this hasn't been an issue since (in-tree at least) these functions are
called by the StatisticInfo destructor so addStatistic() shouldn't be called
anymore. However, we do expose them in the public API.
Note that this only protects against iterator invalidation and does not protect
against ordering issues caused by statistic updates that race with
PrintStatistics()/PrintStatisticsJSON().
Thanks to Roman Tereshin for spotting it
llvm-svn: 326834
Adrian Prantl