This reverts commit r304561 and re-lands r303490 & co.
The fix was to use "SymbolName" when translating LLD's internal export
list to lib/Object's short export struct. The SymbolName reflects the
actual symbol name, which may include fastcall and stdcall mangling bits
not included in the /EXPORT or .def file EXPORTS name:
@@ -434,8 +434,7 @@ std::vector<COFFShortExport> createCOFFShortExportFromConfig() {
std::vector<COFFShortExport> Exports;
for (Export &E1 : Config->Exports) {
COFFShortExport E2;
- E2.Name = E1.Name;
+ // Use SymbolName, which will have any stdcall or fastcall qualifiers.
+ E2.Name = E1.SymbolName;
E2.ExtName = E1.ExtName;
E2.Ordinal = E1.Ordinal;
E2.Noname = E1.Noname;
llvm-svn: 304573
This reverts commits r303490, r303491, r303493, and r303494.
This caused http://crbug.com/728726. Essentially, exporting stdcall
functions doesn't appear to work after this change. Reduced test case
soon.
llvm-svn: 304561
BIND_OPCODE_SET_DYLIB_SPECIAL_IMM(0) is a valid way to setp library
ordinal. MachOObject should set LibraryOrdinalSet even when IMM is zero.
llvm-svn: 304362
With fix of uninitialized variable.
Original commit message:
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses with use of llvm::LoadedObjectInfo
interface. We assigned file offsets as addressed. Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well. That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 304078
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses with use of llvm::LoadedObjectInfo
interface. We assigned file offsets as addressed. Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well. That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 304002
With fix of test compilation.
Initial commit message:
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section
which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses
with use of llvm::LoadedObjectInfo interface. We assigned file offsets as addressed.
Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason
of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well.
That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 303983
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section
which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses
with use of llvm::LoadedObjectInfo interface. We assigned file offsets as addressed.
Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason
of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well.
That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 303978
This is split up into two commits.
The will create the DEF parser in LLVM.
Check the following commit to see the removal from LLD
Reviewers: ruiu
Differential Revision: https://reviews.llvm.org/D32689
llvm-svn: 303490
Summary: Added the new modules in the Object/ folder. Updated the
llvm-cvtres interface as well, and added additional tests.
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33180
llvm-svn: 303480
I revisited Decompressor API (issue with it was triggered during D32865 review)
and found it is probably provides more then we really need.
Issue was about next method's signature:
Error decompress(SmallString<32> &Out);
It is too strict. At first I wanted to change it to decompress(SmallVectorImpl<char> &Out),
but then found it is still not flexible because sticks to SmallVector.
During reviews was suggested to use templating to simplify code. Patch do that.
Differential revision: https://reviews.llvm.org/D33200
llvm-svn: 303331
Running `llvm-readobj -coff-directives msvcrt.lib` resulted in this error:
Invalid data was encountered while parsing the file
This happened because some of the object files in the archive have empty
`.drectve` sections. These empty sections result in a `parse_failed` error being
returned from `COFFObjectFile::getSectionContents()`, which in turn caused
`llvm-readobj` to stop. With this change, `getSectionContents` now returns
success, and like before the resulting array is empty.
Patch by Dave Lee.
Differential Revision: https://reviews.llvm.org/D32652
llvm-svn: 303014
Previously we had only supported the importing and
exporting of functions and globals.
Also, add usefull overload of getWasmSymbol() and
getNumberOfSymbols() in support of lld port.
Differential Revision: https://reviews.llvm.org/D33011
llvm-svn: 302601
The check for valid start function was inverted. Added a new
test in test/Object to check this case and fixed the existing
tests in for ObjectYAML.
Differential Revision: https://reviews.llvm.org/D32986
llvm-svn: 302560
Summary: Continue making updates to llvm-readobj to display resource sections. This is necessary for testing the up and coming cvtres tool.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32609
llvm-svn: 302399
Summary:
This reverts commit 56beec1b1cfc6d263e5eddb7efff06117c0724d2.
Revert "Quick fix to D32609, it seems .o files are not transferred in all cases."
This reverts commit 7652eecd29cfdeeab7f76f687586607a99ff4e36.
Revert "Update llvm-readobj -coff-resources to display tree structure."
This reverts commit 422b62c4d302cfc92401418c2acd165056081ed7.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32958
llvm-svn: 302397
Summary: Continue making updates to llvm-readobj to display resource sections. This is necessary for testing the up and coming cvtres tool.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32609
llvm-svn: 302386
This is motivated by https://reviews.llvm.org/D32488 where I am trying
to add printing of the section type for incompatible sections to LLD
error messages. This patch allows us to use the same code in
llvm-readobj and LLD instead of duplicating the function inside LLD.
Patch by Alexander Richardson!
llvm-svn: 301921
Marking them as used causes them to be considered visible outside of LTO. This
prevents the symbols from being internalized or discarded, either by GlobalDCE
or by summary-based dead stripping in ThinLTO.
This change makes it unnecessary to add these symbols to llvm.compiler.used
in the backend, as the symbols are kept alive by virtue of being external,
so remove the backend code that handles that.
Fixes PR32798.
Differential Revision: https://reviews.llvm.org/D32544
llvm-svn: 301438
Summary:
Addends are used as offsets to addresses of globals
and can be both positive and negative. This change
prints libObject in line with the spec and the MC
layer.
Subscribers: jfb, dschuff
Differential Revision: https://reviews.llvm.org/D32507
llvm-svn: 301369
Instead of storing an UncommonIndex on the Symbol, use a flag bit to store
whether the Symbol has an Uncommon. This shrinks Chromium's .bc files (after
D32061) by about 1%.
Differential Revision: https://reviews.llvm.org/D32070
llvm-svn: 300514
Start using it in LLD to avoid needing to read bitcode again just to get the
target triple, and in llvm-lto2 to avoid printing symbol table information
that is inappropriate for the target.
Differential Revision: https://reviews.llvm.org/D32038
llvm-svn: 300300
Summary:
The linker needs to be able to determine whether a symbol is text or data to
handle the case of a common being overridden by a strong definition in an
archive. If the archive contains a text member of the same name as the common,
that function is discarded. However, if the archive contains a data member of
the same name, that strong definition overrides the common. This is a behavior
of ld.bfd, which the Qualcomm linker also supports in LTO.
Here's a test case to illustrate:
####
cat > 1.c << \!
int blah;
!
cat > 2.c << \!
int blah() {
return 0;
}
!
cat > 3.c << \!
int blah = 20;
!
clang -c 1.c
clang -c 2.c
clang -c 3.c
ar cr lib.a 2.o 3.o
ld 1.o lib.a -t
####
The correct output is:
1.o
(lib.a)3.o
Thanks to Shankar Easwaran and Hemant Kulkarni for the test case!
Reviewers: mehdi_amini, rafael, pcc, davide
Reviewed By: pcc
Subscribers: davide, llvm-commits, inglorion
Differential Revision: https://reviews.llvm.org/D31901
llvm-svn: 300205
Introduce symbol table data structures that can be potentially written to
disk, have the LTO library build those data structures using temporarily
constructed modules and redirect the LTO library implementation to go through
those data structures. This allows us to remove the LLVMContext and Modules
owned by InputFile.
With this change I measured a peak memory consumption decrease from 5.4GB to
2.8GB in a no-op incremental ThinLTO link of Chromium on Linux. The impact on
memory consumption is larger in COFF linkers where we are currently forced
to materialize all metadata in order to read linker options. Peak memory
consumption linking a large piece of Chromium for Windows with full LTO and
debug info decreases from >64GB (OOM) to 15GB.
Part of PR27551.
Differential Revision: https://reviews.llvm.org/D31364
llvm-svn: 299168
BIND_OPCODE_DONE/REBASE_OPCODE_DONE may appear at the end of the opcode array,
but they are not required to. The linker only adds them as padding to align the
opcodes to pointer size.
This fixes rdar://problem/31285560.
llvm-svn: 299104
Mostly this change adds support converting to and from
YAML which will allow us to write more test cases for
the WebAssembly MC and lld ports.
Better support for objdump, readelf, and nm will be in
followup CLs.
I had to update the two wasm test binaries because they
used the old style 'name' section which is no longer
supported.
Differential Revision: https://reviews.llvm.org/D31099
Patch by Sam Clegg
llvm-svn: 299101
rebase entry errors and test cases for each of the error checks.
Also verified with Nick Kledzik that a BIND_OPCODE_SET_ADDEND_SLEB
opcode is legal in a lazy bind table, so code that had that as an error
check was removed.
With MachORebaseEntry and MachOBindEntry classes now returning
an llvm::Error in all cases for malformed input the variables Malformed
and logic to set use them is no longer needed and has been removed
from those classes.
Also in a few places, removed the redundant Done assignment to true
when also calling moveToEnd() as it does that assignment.
This only leaves the dyld compact export entries left to have
error handling yet to be added for the dyld compact info.
llvm-svn: 298883
Summary:
The cumulative size of the bitcode files for a very large application
can be huge, particularly with -g. In a distributed build environment,
all of these files must be sent to the remote build node that performs
the thin link step, and this can exceed size limits.
The thin link actually only needs the summary along with a bitcode
symbol table. Until we have a proper bitcode symbol table, simply
stripping the debug metadata results in significant size reduction.
Add support for an option to additionally emit minimized bitcode
modules, just for use in the thin link step, which for now just strips
all debug metadata. I plan to add a cc1 option so this can be invoked
easily during the compile step.
However, care must be taken to ensure that these minimized thin link
bitcode files produce the same index as with the original bitcode files,
as these original bitcode files will be used in the backends.
Specifically:
1) The module hash used for caching is typically produced by hashing the
written bitcode, and we want to include the hash that would correspond
to the original bitcode file. This is because we want to ensure that
changes in the stripped portions affect caching. Added plumbing to emit
the same module hash in the minimized thin link bitcode file.
2) The module paths in the index are constructed from the module ID of
each thin linked bitcode, and typically is automatically generated from
the input file path. This is the path used for finding the modules to
import from, and obviously we need this to point to the original bitcode
files. Added gold-plugin support to take a suffix replacement during the
thin link that is used to override the identifier on the MemoryBufferRef
constructed from the loaded thin link bitcode file. The assumption is
that the build system can specify that the minimized bitcode file has a
name that is similar but uses a different suffix (e.g. out.thinlink.bc
instead of out.o).
Added various tests to ensure that we get identical index files out of
the thin link step.
Reviewers: mehdi_amini, pcc
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D31027
llvm-svn: 298638
and test cases for each of the error checks.
To do this more plumbing was needed so that the segment indexes and
segment offsets can be checked. Basically what was done was the SegInfo
from llvm-objdump’s MachODump.cpp was moved into libObject for Mach-O
objects as BindRebaseSegInfo and it is only created when an iterator for
bind or rebase entries are created.
This commit really only adds the error checking and test cases for the
bind table entires and the checking for the lazy bind and weak bind entries
are still to be fully done as well as the rebase entires. Though some of
the plumbing for those are added with this commit. Those other error
checks and test cases will be added in follow on commits.
Note, the two llvm_unreachable() calls should now actually be unreachable
with the error checks in place and would take a logic bug in the error
checking code to be reached if the segment indexes and segment
offsets are used from a checked bind entry. Comments have been added
to the methods that require the arguments to have been checked
prior to calling.
llvm-svn: 298292
On Solaris ld (and some other tools that use the underlying utility
libraries, such as elfdump) chokes on an archive library that has no
symbol table. The Solaris tools always create one, even if it's empty.
That bug has been fixed in the latest development line, and can
probably be backported to a supported release, but it would be nice if
LLVM's archiver could emit the empty symbol table, too.
Patch by Danek Duvall!
llvm-svn: 297773
Summary:
In a .symver assembler directive like:
.symver name, name2@@nodename
"name2@@nodename" should get the same symbol binding as "name".
While the ELF object writer is updating the symbol binding for .symver
aliases before emitting the object file, not doing so when the module
inline assembly is handled by the RecordStreamer is causing the wrong
behavior in *LTO mode.
E.g. when "name" is global, "name2@@nodename" must also be marked as
global. Otherwise, the symbol is skipped when iterating over the LTO
InputFile symbols (InputFile::Symbol::shouldSkip). So, for example,
when performing any *LTO via the gold-plugin, the versioned symbol
definition is not recorded by the plugin and passed back to the
linker. If the object was in an archive, and there were no other symbols
needed from that object, the object would not be included in the final
link and references to the versioned symbol are undefined.
The llvm-lto2 tests added will give an error about an unused symbol
resolution without the fix.
Reviewers: rafael, pcc
Reviewed By: pcc
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D30485
llvm-svn: 297332
other tables. Providing a helpful error message to what the error is and
where the error occurred based on which opcode it was associated with.
There have been handful of bug fixes dealing with bad bind info in
object files, r294021 and r249845, which only put a band aid on the
problem after a bad bind table was created after unpacking from
its compact info. In these cases a bind table should have never been
created and an error should have simply been generated.
This change puts in place the plumbing to allow checking and returning
of an error when the compact info is unpacked. This follows the model
of iterators that can fail that Lang Hanes designed when fixing the problem
for bad archives r275316 (or r275361).
This change uses one of the existing test cases that now causes an
error instead of printing <<bad library ordinal>> after a bad bind table
is created. The error uses the offset into the opcode table as shown with
the macOS dyldinfo(1) tool to indicate where the error is and which
opcode and which parameter is in error.
For example the exiting test case has this lazy binding opcode table:
% dyldinfo -opcodes test/tools/llvm-objdump/Inputs/bad-ordinal.macho-x86_64
…
lazy binding opcodes:
0x0000 BIND_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB(0x02, 0x00000010)
0x0002 BIND_OPCODE_SET_DYLIB_ORDINAL_IMM(2)
In the test case the binary only has one library so setting the library
ordinal to the value of 2 in the BIND_OPCODE_SET_DYLIB_ORDINAL_IMM
opcode at 0x0002 above is an error. This now produces this error message:
% llvm-objdump -lazy-bind bad-ordinal.macho-x86_64
…
llvm-objdump: 'bad-ordinal.macho-x86_64': truncated or malformed object (for BIND_OPCODE_SET_DYLIB_ORDINAL_ULEB bad library ordinal: 2 (max 1) for opcode at: 0x2)
This change provides the plumbing for the error handling and one example
of an error message. Other error checks and test cases will be added in follow
on commits.
llvm-svn: 296527
For whatever reason ld64 requires that member headers (not the member
themselves) should be aligned. The only way to do that is to edit the
previous member so that it ends at an aligned boundary.
Since modifying data put in an archive is an undesirable property,
llvm-ar should only do it when it is absolutely necessary.
llvm-svn: 295765
in this case for CPU_SUBTYPE_ARM64_ALL.
For this cpusubtype it should default to a cyclone CPU
to give proper disassembly without a -mcpu= flag.
rdar://27767188
llvm-svn: 294771
This makes sure we get the same redefinition rules regardless of who
is printing (asm parser, codegen) and to what (asm, obj).
This fixes an unintentional regression in r293936.
llvm-svn: 294752
ld64 requires its archive members to be 8-byte aligned for 64-bit
content and 4-byte aligned for 32-bit content. Opt for the larger
alignment requirement. This ensures that ld64 can consume archives
generated by llvm-ar.
Thanks to Kevin Enderby for the hint about the ld64/cctools behaviours!
Resolves PR28361!
llvm-svn: 294615
Add a note about the reason for the divergence from the specification
for ld64. Addresses post-commit review comments from Davide. NFC.
llvm-svn: 294594
cctools would pad the string table to a sizeof(int32_t) (explicitly
printed out by cctools rather than 4). This adjusts the string table to
make it more compatible with cctools, but is insufficient to make ld64
happy.
llvm-svn: 294557
it was printing the field name fileoff instead of filesize. The original check
was added in r278557.
This was found in tracking down the problem that lead to the fix in
r293842 - [dsymutil] Fix __LINKEDIT vmsize in dsymutil upgrade path
rdar://30386075
llvm-svn: 294354
Create a WasmDumper subclass of ObjDumper to support Webassembly binary
files.
Patch by Sam Clegg
Differential Revision: https://reviews.llvm.org/D27355
llvm-svn: 293569
for CPU_SUBTYPE_ARM_V7S and CPU_SUBTYPE_ARM_V7K.
For these two cpusubtypes they should default to a cortex-a7 CPU
to give proper disassembly without a -mcpu= flag.
rdar://27431703
llvm-svn: 292993
in llvm-objdump for Mach-O files add the printing of the
x86_thread_state32_t in the same format as
otool-classic(1) on darwin.
To do this the 32-bit x86 general tread state
needed to be defined in include/llvm/Support/MachO.h .
rdar://30110111
llvm-svn: 292829
Summary:
Add a new load command LC_BUILD_VERSION. It is a generic version of
LC_*_VERSION_MIN load_command used on Apple platforms. Instead of having
a seperate load command for each platform, LC_BUILD_VERSION is recording
platform info as an enum. It also records SDK version, min_os, and tools
that used to build the binary.
rdar://problem/29781291
Reviewers: enderby
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29044
llvm-svn: 292824
It describes a region of arbitrary data included in a Mach-O file.
Its initial use is to record extra data in MH_CORE files.
rdar://30001545
rdar://30001731
llvm-svn: 292500
An ELFObjectFile can now create SubtargetFeatures from the available
ARM build attributes, in a similar manner to MIPS. I've moved the
MIPS code into its own function and the ARM handler also has a
separate function.
Differential Revision: https://reviews.llvm.org/D28291
llvm-svn: 292403
Enable an ELFObjectFile to read the its arm build attributes to
produce a target triple with a specific ARM architecture.
llvm-objdump now uses this functionality to automatically produce
a more accurate target.
Differential Revision: https://reviews.llvm.org/D28769
llvm-svn: 292366
No any changes, will follow up with D28807 commit containing APLi change for clang
to fix build issues happened.
Original commit message:
[Support/Compression] - Change zlib API to return Error instead of custom status.
Previously API returned custom enum values.
Patch changes it to return Error with string description.
That should help users to report errors in universal way.
Differential revision: https://reviews.llvm.org/D28684
llvm-svn: 292226
Previously API returned custom enum values.
Patch changes it to return Error with string description.
That should help users to report errors in universal way.
Differential revision: https://reviews.llvm.org/D28684
llvm-svn: 292214
Summary:
Revert [ARM] Fix ubig32_t read in ARMAttributeParser
Now using support functions to read data instead of trying to
perform casts.
===========================================================
Revert [ARM] Enable objdump to construct triple for ARM
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Subscribers: llvm-commits, samparker, aemerson, mgorny
Differential Revision: https://reviews.llvm.org/D28683
llvm-svn: 291911
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Differential Revision: https://reviews.llvm.org/D28281
llvm-svn: 291898
Decompressor intention is to reduce duplication of code.
Currently LLD has own implementation of decompressor
for compressed debug sections.
This class helps to avoid it and share the code.
LLD patch for reusing it is D28106
Differential revision: https://reviews.llvm.org/D28105
llvm-svn: 291675
Running a Debug build of objdump -objc-meta-data with a large Mach-O file is
currently unnecessarily slow.
With some local test input, this change reduces the run time from 75-85s down
to 15-20s.
The two changes are:
Assert on pointer equality not array equality
Replace vector<pair<address, symbol>> with DenseMap<address, symbol>
Additionally, use a std::unique_ptr rather than handling the memory manually.
Patch by Dave Lee!
llvm-svn: 291398
Summary:
In order to simplify distributed build system integration, where actions
may be scheduled before the Thin Link which determines the list of
objects selected by the linker. The gold plugin currently will emit
0-sized index files for objects not selected by the link, to enable
checking for expected output files by the build system. If the build
system then schedules a backend action for these bitcode files, we want
to be able to fall back to normal compilation instead of failing.
This is the LLVM side support for optionally enabling fallback
instead of issuing an error. Return a null CombinedIndex from
llvm::getModuleSummaryIndexForFile under the option when the file
is empty. Clang can then ignore the index when it is null.
Clang patch is D28362.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28410
llvm-svn: 291302
The Mach-O command line flag like "-arch armv7m" does not match the
arch name part of its llvm Triple which is "thumbv7m-apple-darwin”.
I think the best way to fix this is to have
llvm::object::MachOObjectFile::getArchTriple() optionally return the
name of the Mach-O arch flag that would be used with -arch that
matches the CPUType and CPUSubType. Then change
llvm::object::MachOUniversalBinary::ObjectForArch::getArchTypeName()
to use that and change it to getArchFlagName() as the type name is
really part of the Triple and the -arch flag name is a Mach-O thing
for a specific Triple with a specific Mcpu value.
rdar://29663637
llvm-svn: 290001
Summary:
When reading the metadata bitcode, create a type declaration when
possible for composite types when we are importing. Doing this in
the bitcode reader saves memory. Also it works naturally in the case
when the type ODR map contains a definition for the same composite type
because it was used in the importing module (buildODRType will
automatically use the existing definition and not create a type
declaration).
For Chromium built with -g2, this reduces the aggregate size of the
generated native object files by 66% (from 31G to 10G). It reduced
the time through the ThinLTO link and backend phases by about 20% on
my machine.
Reviewers: mehdi_amini, dblaikie, aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27775
llvm-svn: 289993
Changes all static helper functions in MachOObjectFile.cpp that expect a
non-null MachOObjectFile pointer to take a reference instead.
llvm-svn: 288608
This allows us to remove a few uses of IRObjectFile::getSymbolGV() in
llvm-nm.
While here change host-dependent logic in llvm-nm to target-dependent
logic.
Differential Revision: https://reviews.llvm.org/D27075
llvm-svn: 288320
This class represents a symbol table built from in-memory IR. It provides
access to GlobalValues and should only be used if such access is required
(e.g. in the LTO implementation). We will eventually change IRObjectFile
to read from a bitcode symbol table rather than using ModuleSymbolTable,
so it would not be able to expose the module.
Differential Revision: https://reviews.llvm.org/D27073
llvm-svn: 288319
Summary:
When using thin archives, and processing the same archive multiple times, we were mangling existing entries. The root cause is that we were calling computeRelativePath() more than once. Here, we only call it when adding new members to an archive.
Note that D27218 changes the way thin archives are printed, and will break the new unit test included here. Depending on which one lands first, the other will need to be slightly modified.
Reviewers: rafael, davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27217
llvm-svn: 288280
This is the first part of an effort to add wasm binary
support across all llvm tools.
Patch by Sam Clegg
Differential Revision: https://reviews.llvm.org/D26172
llvm-svn: 288251
Add the checking for both the MachO::fat_header and the
MachO::fat_arch struct values in the constructor for
MachOUniversalBinary. Such that when the constructor
for ObjectForArch is called it can assume the values in
the MachO::fat_arch for the offset and size are contained
in the file after the MachOUniversalBinary constructor
is called for the Parent.
llvm-svn: 288084
Change the IRObjectFile symbol iterator to be a pointer into a vector of
PointerUnions representing either IR symbols or asm symbols.
This change is in preparation for a future change for supporting multiple
modules in an IRObjectFile. Although it causes an increase in memory
consumption, we can deal with that issue separately by introducing a bitcode
symbol table.
Differential Revision: https://reviews.llvm.org/D26928
llvm-svn: 287845
Sometimes, llvm-symbolizer gives wrong results due to incorrect sizes of some symbols. The reason for that was an incorrectly sorted array in computeSymbolSizes. The comparison function used subtraction of unsigned types, which is incorrect. Let's change this to return explicit -1 or 1.
Differential Revision: https://reviews.llvm.org/D26537
llvm-svn: 287028
This patch makes it possible to identify object files created by CL.exe
with /GL option. Such file contains Microsoft proprietary intermediate
code instead of target machine code to do LTO.
I need this to print out user-friendly error message from LLD.
Differential Revision: https://reviews.llvm.org/D26645
llvm-svn: 286919
The philosophy of the error checking in libObject for Mach-O files
is that the constructor will check the load commands so for their
tables the offsets and sizes are properly contained in the file.
But there is no checking of the entries of any of the tables.
For the contents of the tables themselves the methods accessing
the contents of the entries return errors as needed. In some
cases this however makes it difficult or cumbersome to produce
a good error message which would include the tool name, file name,
archive member, and name of the architecture of a slice of a universal file
the error occurred in.
So idea is that there will be a method to check a table which can
be called up front before using it allowing a good error message
to be produced before a table is used. And if only verification of
the Mach-O file and its tables are wanted a new possible method
checkAllTables() could be added to call all of the methods to
check all the tables at some time when such methods exist.
The checkSymbolTable() is the first of such methods to check
one of the Mach-O file tables. This method initially will used in
llvm-objdump’s DisassembleMachO() routine before it gets the
section and symbol information. As if there are problems with
the symbol table currently the error is first encountered by the
bool operator() in the SymbolSorter() struct which passed to
std::sort(). In this case there is no context as to the file name
the symbol which results a poor error message:
LLVM ERROR: truncated or malformed object (bad string index: 22 for symbol at index 1)
with the added call to the checkSymbolTable() method the
error message includes the tool name and file name:
llvm-objdump: 'macho-invalid-symbol-strx': truncated or malformed object (bad string table index: 22 past the end of string table, for symbol at index 1)
llvm-svn: 286887
This restores the rest of r286297 (part was restored in r286475).
Specifically, it restores the part requiring adding a dependency from
the Analysis to Object library (downstream use changed to correctly
model split BitReader vs BitWriter libraries).
Original description of this part of patch follows:
Module level asm may also contain defs of values. We need to prevent
export of any refs to local values defined in module level asm (e.g. a
ref in normal IR), since that also requires renaming/promotion of the
local. To do that, the summary index builder looks at all values in the
module level asm string that are not marked Weak or Global, which is
exactly the set of locals that are defined. A summary is created for
each of these local defs and flagged as NoRename.
This required adding handling to the BitcodeWriter to look at GV
declarations to see if they have a summary (rather than skipping them
all).
Finally, added an assert to IRObjectFile::CollectAsmUndefinedRefs to
ensure that an MCAsmParser is available, otherwise the module asm parse
would silently fail. Initialized the asm parser in the opt tool for use
in testing this fix.
Fixes PR30610.
llvm-svn: 286844
The functions getBitcodeTargetTriple(), isBitcodeContainingObjCCategory(),
getBitcodeProducerString() and hasGlobalValueSummary() now return errors
via their return value rather than via the diagnostic handler.
To make this work, re-implement these functions using non-member functions
so that they can be used without the LLVMContext required by BitcodeReader.
Differential Revision: https://reviews.llvm.org/D26532
llvm-svn: 286623
Summary:
Split ReaderWriter.h which contains the APIs into both the BitReader and
BitWriter libraries into BitcodeReader.h and BitcodeWriter.h.
This is to address Chandler's concern about sharing the same API header
between multiple libraries (BitReader and BitWriter). That concern is
why we create a single bitcode library in our downstream build of clang,
which led to r286297 being reverted as it added a dependency that
created a cycle only when there is a single bitcode library (not two as
in upstream).
Reviewers: mehdi_amini
Subscribers: dlj, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D26502
llvm-svn: 286566
This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
Summary:
This patch uses the same approach added for inline asm in r285513 to
similarly prevent promotion/renaming of locals used or defined in module
level asm.
All static global values defined in normal IR and used in module level asm
should be included on either the llvm.used or llvm.compiler.used global.
The former were already being flagged as NoRename in the summary, and
I've simply added llvm.compiler.used values to this handling.
Module level asm may also contain defs of values. We need to prevent
export of any refs to local values defined in module level asm (e.g. a
ref in normal IR), since that also requires renaming/promotion of the
local. To do that, the summary index builder looks at all values in the
module level asm string that are not marked Weak or Global, which is
exactly the set of locals that are defined. A summary is created for
each of these local defs and flagged as NoRename.
This required adding handling to the BitcodeWriter to look at GV
declarations to see if they have a summary (rather than skipping them
all).
Finally, added an assert to IRObjectFile::CollectAsmUndefinedRefs to
ensure that an MCAsmParser is available, otherwise the module asm parse
would silently fail. Initialized the asm parser in the opt tool for use
in testing this fix.
Fixes PR30610.
Reviewers: mehdi_amini
Subscribers: johanengelen, krasin, llvm-commits
Differential Revision: https://reviews.llvm.org/D26146
llvm-svn: 286297
Unique ownership is just one possible ownership pattern for the memory buffer
underlying the bitcode reader. In practice, as this patch shows, ownership can
often reside at a higher level. With the upcoming change to allow multiple
modules in a single bitcode file, it will no longer be appropriate for
modules to generally have unique ownership of their memory buffer.
The C API exposes the ownership relation via the LLVMGetBitcodeModuleInContext
and LLVMGetBitcodeModuleInContext2 functions, so we still need some way for
the module to own the memory buffer. This patch does so by adding an owned
memory buffer field to Module, and using it in a few other places where it
is convenient.
Differential Revision: https://reviews.llvm.org/D26384
llvm-svn: 286214
in llvm-objdump for Mach-O files add the printing of the
ARM_THREAD_STATE64 in the same format as
otool-classic(1) on darwin.
To do this the 64-bit ARM general tread state
needed to be defined in include/llvm/Support/MachO.h .
rdar://28985800
llvm-svn: 285967
That is consistent with other methods around
and helps to handle error on a caller side.
Differential revision: https://reviews.llvm.org/D26247
llvm-svn: 285886
the offsets and sizes of an element of the Mach-O file overlaps with
another element in the Mach-O file.
Some other tests for malformed Mach-O files now run into these
checks so their tests were also adjusted.
llvm-svn: 285860
Otherwise we set it always to zero, which is not correct,
and we assert inside alignTo (Assertion failed:
Align != 0u && "Align can't be 0.").
Differential Revision: https://reviews.llvm.org/D26173
llvm-svn: 285841
Add the necessary definitions for RISC-V ELF files, including relocs. Also
make necessary trivial change to ELFYaml, llvm-objdump, and llvm-readobj in
order to work with RISC-V ELFs.
Differential Revision: https://reviews.llvm.org/D23557
llvm-svn: 285708
the offsets and sizes of an element of the file overlaps with
another element in the Mach-O file.
This shows the approach to this testing for three elements
and contains for tests for their overlap. Checking for all the
remain elements will be added next.
llvm-svn: 285632
obsolete load commands.
Again the philosophy of the error checking in libObject for
Mach-O files, the idea behind the checking is that we never
will return a Mach-O file out of libObject that contains unknown
things the library code can’t operate on. So known obsolete
load commands will cause a hard error.
Also to make things clear I have added comments to the
values and structures in Support/Mach-O.h and
Support/MachO.def as to what is obsolete.
As noted in a TODO in the code, there may need to be a
non-default mode to allow some unknown values for well
structured Mach-O files with things like unknown load
load commands. So things like using an old lldb on a newer
Mach-O file could still provide some limited functionality.
llvm-svn: 285342
Summary:
Most of the changes are very straight-forward. The only choice I had to make was
to use second-precision time points in the Archive classes. I did this because
the archive files use that precision in the on-disk representation anyway.
Reviewers: rafael, zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25773
llvm-svn: 284974
load commands that use the MachO::twolevel_hints_command type
which includes only the LC_TWOLEVEL_HINTS load command.
This is not used in llvm libObject code or in llvm tool code. But
does appear in one of the binary test files. While this load command is
obsolete it is easier to add code for it in libObject than edit or change
the binary test case.
llvm-svn: 284769
load commands that use the MachO::thread_command type
but are not used in llvm libObject code but used in llvm tool code.
This includes the LC_UNIXTHREAD and LC_THREAD
load commands.
A quick note about the philosophy of the error checking in
libObject for Mach-O files, the idea behind the checking is
that we never will return a Mach-O file out of libObject that
contains unknown things in the load commands.
To do this the 32-bit ARM and PPC general tread states
needed to be defined as two test case binaries contained
them. If other thread states for other CPUs need to be
added we will do that as needed.
Going forward the LC_MAIN load command is used to
set the entry point in Mach-O executables these days
instead of an LC_UNIXTHREAD as was done in the past.
So today only in core files are LC_THREAD load commands
and thread states usually found.
Other thread states have not yet been defined in
include/Support/MachO.h at this time. But that can be
added as needed with their corresponding checking also
added.
llvm-svn: 284668
load command that use the MachO:: linkedit_data_command
type but is not used in llvm libObject code but used in llvm tool code.
This is for the LC_CODE_SIGNATURE load command.
llvm-svn: 284529
load commands that use the MachO::routines_command and
and MachO::routines_command_64 types but are not used in llvm
libObject code but used in llvm tool code.
This includes the LC_ROUTINES and LC_ROUTINES_64
load commands.
llvm-svn: 284504
When Error was threaded through these APIs back in r265606 the
"return" was missed here, which triggers a warning if/when I add
LLVM_NODISCARD to the Error type.
llvm-svn: 284454
load commands that use the MachO::sub_framework_command,
MachO::sub_umbrella_command, MachO::sub_library_command
and MachO::sub_client_command types but are not used in llvm
libObject code but used in llvm tool code.
This includes the LC_SUB_FRAMEWORK, LC_SUB_UMBRELLA,
LC_SUB_LIBRARY and LC_SUB_CLIENT load commands.
llvm-svn: 284431
load commands that uses the MachO::linker_option_command
type but not used in llvm libObject code but used in llvm tool code.
This includes just LC_LINKER_OPTION load command.
llvm-svn: 283939
To be default constructible, Archive::child_iterator needs to be able to
construct an Archive::Child with a null parent, however Archive::Child's
constructor always dereferenced its Parent argument to compute the remaining
archive size. This commit fixes Archive::Child's constructor to only do the
size calculation when the parent is non-null.
llvm-svn: 283387
load commands that uses the MachO::encryption_info_command and
MachO::encryption_info_command types but not used in llvm libObject
code but used in llvm tool code.
This includes just LC_ENCRYPTION_INFO and
LC_ENCRYPTION_INFO_64 load commands.
llvm-svn: 283250
load command that uses the MachO::entry_point_command type
but not used in llvm libObject code but used in llvm tool code.
This includes just the LC_MAIN load command.
llvm-svn: 282766
load command that uses the Mach::source_version_command type
but not used in llvm libObject code but used in llvm tool code.
This includes just the LC_SOURCE_VERSION load command.
llvm-svn: 282736
load command that uses the Mach::rpath_command type
but not used in llvm libObject code but used in llvm tool code.
This includes just the LC_RPATH load command.
llvm-svn: 282649
other load commands that use the Mach::version_min_command type
but not used in llvm libObject code but used in llvm tool code.
This includes LC_VERSION_MIN_MACOSX, LC_VERSION_MIN_IPHONEOS,
LC_VERSION_MIN_TVOS and LC_VERSION_MIN_WATCHOS load commands.
llvm-svn: 282635
other load commands that use the MachO::dylinker_command type
but not used in llvm libObject code but used in llvm tool code.
This includes LC_ID_DYLINKER, LC_LOAD_DYLINKER
and LC_DYLD_ENVIRONMENT load commands.
llvm-svn: 282553
other load commands that use the Mach::linkedit_data_command type
but not used in llvm libObject code but used in llvm tool code.
This includes LC_FUNCTION_STARTS, LC_SEGMENT_SPLIT_INFO
and LC_DYLIB_CODE_SIGN_DRS load commands.
llvm-svn: 282441
load commands. Added a missing check and made the check for more than
one like other other “more than one” checks. And of course added test cases.
llvm-svn: 282104
that use the Mach::dylib_command type for the load commands that are
currently used in the MachOObjectFile constructor.
This contains the missing checks for LC_ID_DYLIB, LC_ID_DYLIB, etc.
load commands and the fields for the Mach::dylib_command type.
Also checks that only an MH_DYLIB or MH_STUB_DYLIB has an
LC_ID_DYLIB load command (and others filetype don’t) and there
is not more than one of these load commands.
llvm-svn: 282008
that use the Mach::dyld_info_command type for the load commands that are
currently use in the MachOObjectFile constructor.
This contains the missing checks for LC_DYLD_INFO and
LC_DYLD_INFO_ONLY load commands and the fields for the
Mach::dyld_info_command type.
llvm-svn: 281400
that use the Mach::linkedit_data_command type for the load commands that are
currently used in the MachOObjectFile constructor.
This contains the missing checks for LC_DATA_IN_CODE and
LC_LINKER_OPTIMIZATION_HINT load commands and the fields for the
Mach::linkedit_data_command type. Checking for other load commands that
use this type will be added later.
Also fixed a couple of places that was using sizeof(MachOObjectFile::LoadCommandInfo)
that should have been using sizeof(MachO::load_command).
llvm-svn: 280267
When binaries are compressed by UPX, information about symbol table
offset and symbol count remain unchanged (but became invalid due to
compression).
This causes failure in the constructor and the rest of the binary cannot
be processed.
Instead, reset symbol related information (symbol/string table pointers,
sizes) - this should disable the related iterators and functions while
the rest of the binary can still be processed.
Patch by Bandzi Michal!
llvm-svn: 280147
This is a mechanical change of comments in switches like fallthrough,
fall-through, or fall-thru to use the LLVM_FALLTHROUGH macro instead.
llvm-svn: 278902
This contains the two missing checks for LC_SEGMENT load command fields.
And checks for the Mach-O sections fields that would make them invalid.
With the new checks, some of the existing malformed file checks now trips one
of these instead of the issue it was having before so those tests were adjusted.
llvm-svn: 278557
This restores commit r278330, with fixes for a few bot failures:
- Fix a late change I had made to the save temps output file that I
missed due to existing files sitting on my disk
- Fix a bunch of Windows bot failures with "ambiguous call to overloaded
function" due to confusion between llvm::make_unique vs
std::make_unique (preface the new make_unique calls with "llvm::")
- Attempt to fix a modules bot failure by adding a missing include
to LTO/Config.h.
Original change:
Resolution-based LTO API.
Summary:
This introduces a resolution-based LTO API. The main advantage of this API over
existing APIs is that it allows the linker to supply a resolution for each
symbol in each object, rather than the combined object as a whole. This will
become increasingly important for use cases such as ThinLTO which require us
to process symbol resolutions in a more complicated way than just adjusting
linkage.
Patch by Peter Collingbourne.
Reviewers: rafael, tejohnson, mehdi_amini
Subscribers: lhames, tejohnson, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D20268
llvm-svn: 278338
This reverts commit r278330.
I made a change to the save temps output that is causing issues with the
bots. Didn't realize this because I had older output files sitting on
disk in my test output directory.
llvm-svn: 278331
Summary:
This introduces a resolution-based LTO API. The main advantage of this API over
existing APIs is that it allows the linker to supply a resolution for each
symbol in each object, rather than the combined object as a whole. This will
become increasingly important for use cases such as ThinLTO which require us
to process symbol resolutions in a more complicated way than just adjusting
linkage.
Patch by Peter Collingbourne.
Reviewers: rafael, tejohnson, mehdi_amini
Subscribers: lhames, tejohnson, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D20268
Address review comments
llvm-svn: 278330
The DebugDirectory contains a pointer to the CodeView info structure which is a
derivative of the OMF debug directory. The structure has evolved a bit over
time, and PDB 2.0 used a slightly different definition from PDB 7.0. Both of
these are specific to CodeView and not COFF. Reflect this by moving the
structure definitions into the DebugInfo/CodeView headers. Define a generic
DebugInfo union type that can be used to pass around a reference to the
DebugInfo irrespective of the versioning. NFC.
llvm-svn: 278075
Attribute SizeOfOptionalHeader is ignored if no PE header is present
in the file. This attribute should be ignored according to standard,
however there are uses of this field even though it should not be used.
This change does not conform to PE/COFF standard, but there are several
COFF files without PE header, where you had to add up SizeOfOptionalHeader
in order to get proper section headers. Other tools and their own parsers
do take this into account.
Patch by Marek Milkovič!
https://reviews.llvm.org/D22750
llvm-svn: 278066
This is where an LC_SEGMENT load command has a fileoff field that
extends past the end of the file.
Also fix llvm-nm and llvm-size to remove the errorToErrorCode() call so error messages are printed.
And needed to update a few test cases now that they do print the error messages just a
bit differently.
llvm-svn: 277845
when we are pointed at real data.
David Blaikie pointed out some odd logic in the case the Err value was a nullptr and
Lang Hames suggested it could be cleaned it up with an assert to know that Err is
not a nullptr when we are pointed at real data. As only in the case of constructing
the sentinel value by pointing it at null data is Err is permitted to be a nullptr,
since no error could occur in that case.
With this change the testing for “if (Err)” is removed from the constructor’s logic
and *Err is used directly without any check after the assert().
llvm-svn: 277776
changing them to Expected<> to allow them to pass through llvm Errors.
No functional change.
This commit by itself will break the next lld builds. I’ll be committing the
matching change for lld immediately next.
llvm-svn: 277656
This reverts commit the revert commit r277627. The build errors
mentioned in r277627 were likely caused by an unclean build directory.
Sorry for the noise.
llvm-svn: 277630
This reverts commit r277540. It breaks the build with:
../lib/Object/Archive.cpp:264:41: error: return type of out-of-line definition of 'llvm::object::ArchiveMemberHeader::getUID' differs from that in the declaration
Expected<unsigned> ArchiveMemberHeader::getUID() const {
~~~~~~~~~~~~~~~~~~ ^
include/llvm/Object/Archive.h:53:12: note: previous declaration is here
unsigned getUID() const;
~~~~~~~~ ^
llvm-svn: 277627
We had import_directory_table_entry and
coff_import_directory_table_entry, remove one. Also, factor out the
logic which determins if a descriptor is a terminator.
llvm-svn: 277296
in r277177 and added back this test which was deleted in r277196 while
I tracked down these problems.
Changed from constructing Twine's to std::string's as Twine's don't work
across statements. Also removed a few unneeded Twine() constructions.
Fix the write_escaped() calls to not pass the unintended second argument
fixing the warning on the ld-x86_64-win7 bot.
llvm-svn: 277223
As mentioned in commit log for r276686 this next step is adding a new
method in the ArchiveMemberHeader class to get the full name that
does proper error checking, and can be use for error messages.
To do this the name of ArchiveMemberHeader::getName() is changed to
ArchiveMemberHeader::getRawName() to be consistent with
Archive::Child::getRawName(). Then the “new” method is the addition
of a new implementation of ArchiveMemberHeader::getName() which gets
the full name and provides proper error checking. Which is mostly a rewrite
of what was Archive::Child::getName() and cleaning up incorrect uses of
llvm_unreachable() in the code which were actually just cases of errors
in the input Archives.
Then Archive::Child::getName() is changed to return Expected<> and use
the new implementation of ArchiveMemberHeader::getName() .
Also needed to change Archive::getMemoryBufferRef() with these
changes to return Expected<> as well to propagate Errors up.
As well as changing Archive::isThinMember() to return Expected<> .
llvm-svn: 277177
I consulted with Lang Hames on this work, and the goal was to add a bit
of "where" in the archive the error occurred along with what the error was.
So this step changes ArchiveMemberHeader into a class with a pointer
to the archive header and the parent archive. Which allows the methods
in the ArchiveMemberHeader to determine which member the header is
for to include that information in the error message.
For this first step the "where" is just the offset to the member in the
archive. The next step will be a new method on ArchiveMemberHeader
to get the full name, if possible, to be use in the error message. Which
will now be possible as ArchiveMemberHeader contains a pointer to
the Archive with its string table and its size, etc. so the full name can
be determined from the header if it is valid.
Also this change adds the missing checks the archive header is actually
contained in the buffer and is not truncated, as well as if the terminating
characters are correct in the header.
And changes one error message in Archive::Child::getNext() where the
name or offset to member is now added.
llvm-svn: 276686
This allows ErrorAsOutParameter to work better with "optional" errors. For
example, consider a function where for certain input values it is known that
the function can't fail. This can now be written as:
Result foo(Arg X, Error *Err) {
ErrorAsOutParameter EAO(Err);
if (<Error Condition>) {
if (Err)
*Err = <report error>;
else
llvm_unreachable("Unexpected failure!");
}
}
Rather than having to construct an ErrorAsOutParameter under every conditional
where Err is known to be non-null.
llvm-svn: 276430
This step builds on Lang Hames work to change Archive::child_iterator
for better interoperation with Error/Expected. Building on that it is now
possible to return an error message when the size field of an archive
contains non-decimal characters.
llvm-svn: 276025
The same value for EM_BPF is being propagated to glibc,
elfutils, and binutils.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 275633
See http://reviews.llvm.org/D22079
Changes the Archive::child_begin and Archive::children to require a reference
to an Error. If iterator increment fails (because the archive header is
damaged) the iterator will be set to 'end()', and the error stored in the
given Error&. The Error value should be checked by the user immediately after
the loop. E.g.:
Error Err;
for (auto &C : A->children(Err)) {
// Do something with archive child C.
}
// Check the error immediately after the loop.
if (Err)
return Err;
Failure to check the Error will result in an abort() when the Error goes out of
scope (as guaranteed by the Error class).
llvm-svn: 275316
Normal archives do not have empty UID/GID fields. However, the Microsoft
Import library format is a customized archive (it just uses an alternate symbol
index format). When the import library is constructed by lib.exe, the UID and
GID fields are left empty. Do not abort on such an input.
llvm-svn: 274528
The NewArchiveIterator class has a problem: it requires too much context. Any
memory buffers added to the archive must be stored within an Archive::Member,
which must have an associated Archive. This makes it harder than necessary
to create new archive members (or new archives entirely) from scratch using
memory buffers.
This patch replaces NewArchiveIterator with a NewArchiveMember class that
stores just the memory buffer and the information that goes into the archive
member header.
Differential Revision: http://reviews.llvm.org/D21721
llvm-svn: 274183
and its clients to use the new llvm::Error model for error handling.
Changed getAsArchive() from ErrorOr<...> to Expected<...> so now all
interfaces there use the new llvm::Error model for return values.
In the two places it had if (!Parent) this is actually a program error so changed
from returning errorCodeToError(object_error::parse_failed) to calling
report_fatal_error() with a message.
In getObjectForArch() added error messages to its two llvm::Error return values
instead of returning errorCodeToError(object_error::arch_not_found) with no
error message.
For the llvm-obdump, llvm-nm and llvm-size clients since the only binary files in
Mach-O Universal Binaries that are supported are Mach-O files or archives with
Mach-O objects, updated their logic to generate an error when a slice contains
something like an ELF binary instead of ignoring it. And added a test case for
that.
The last error stuff to be cleaned up for libObject’s MachOUniversalBinary is
the use of errorOrToExpected(Archive::create(ObjBuffer)) which needs
Archive::create() to be changed from ErrorOr<...> to Expected<...> first,
which I’ll work on next.
llvm-svn: 274079
allow a good error message to be produced.
I added the one test case that the object file tools could produce an error
message. The other two errors can’t be triggered if the input file is passed
through sys::fs::identify_magic(). But the malformedError("bad magic number")
does get triggered by the logic in llvm-dsymutil when dealing with a normal
Mach-O file. The other "File too small ..." error would take a logic error
currently to produce and is not tested for.
llvm-svn: 273946
The last import is the penultimate entry, the last entry is nulled out.
Data beyond the null entry should not be considered to hold import
entries.
This fixes PR28302.
N.B. I am working on a reduced testcase, the one in PR28302 is too
large.
llvm-svn: 273790
a good error message to be produced.
This is nearly the last libObject interface that used ErrorOr and the last one
that appears in llvm/include/llvm/Object/MachO.h . For Mach-O objects this is
just a clean up because it’s version of getSymbolAddress() can’t return an
error.
I will leave it to the experts on COFF and ELF to actually add meaning full
error messages in their tests if they wish. And also leave it to these experts
to change the last two ErrorOr interfaces in llvm/include/llvm/Object/ObjectFile.h
for createCOFFObjectFile() and createELFObjectFile() if they wish.
Since there are no test cases for COFF and ELF error cases with respect to
getSymbolAddress() in the test suite this is no functional change (NFC).
llvm-svn: 273701
This is a follow-up to r273479. At the time I wrote r273479 I didn't connect the dots that the functions I was adding had to exist somewhere. Turns out, they do. This finishes moving the functions to MachO.h.
Existing MachO fat header tests like test/tools/llvm-readobj/Inputs/macho-universal-archive.x86_64.i386 execute this code.
llvm-svn: 273502
Darwin added support in its Xcode 8.0 tools (released in the beta) for universal
files where offsets and sizes for the objects are 64-bits to allow support for
objects contained in universal files to be larger then 4gb. The change is very
straight forward. There is a new magic number that differs by one bit, much
like the 64-bit Mach-O files. Then there is a new structure that follow the
fat_header that has the same layout but with the offset and size fields using
64-bit values instead of 32-bit values.
rdar://26899493
llvm-svn: 273207
Darwin added support in its Xcode 8.0 tools (released in the beta) for static
library table of contents with 64-bit offsets to the archive members. The
change is very straight forward. The table of contents member is named
___.SYMDEF_64 or "___.SYMDEF_64 SORTED" and same layout is used but with
fields using 64 bit values instead of 32 bit values.
rdar://26869808
llvm-svn: 273058
Summary:
The Mips implementation only covers the feature bits described by the ELF
e_flags so far. Mips stores additional feature bits such as MSA in the
.MIPS.abiflags section.
Also fixed a small bug this revealed where microMIPS wouldn't add the
EF_MIPS_MICROMIPS flag when using -filetype=obj.
Reviewers: echristo, rafael
Subscribers: rafael, mehdi_amini, dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21125
llvm-svn: 272880
Summary:
Previously we would try to load PDBs for every PE executable we tried to
symbolize. If that failed, we would fall back to DWARF. If there wasn't
any DWARF, we'd print mostly useless symbol information using the export
table.
With this change, we only try to load PDBs for executables that claim to
have them. If that fails, we can now print an error rather than falling
back silently. This should make it a lot easier to diagnose and fix
common symbolization issues, such as not having DIA or not having a PDB.
Reviewers: zturner, eugenis
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20982
llvm-svn: 271725
This directory is used to find if there is a PDB associated with an
executable. I plan to use this functionality to teach llvm-symbolizer
whether it should use DIA or DWARF to symbolize a given DLL.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D20885
llvm-svn: 271539
when the object is from a slice of a Mach-O Universal Binary use something like
"foo.o (for architecture i386)" as part of the error message when expected.
Also fixed places in these tools that were ignoring object file errors from
MachOUniversalBinary::getAsObjectFile() when the code moved on to see if
the slice was an archive.
To do this MachOUniversalBinary::getAsObjectFile() and
MachOUniversalBinary::getObjectForArch() were changed from returning
ErrorOr<...> to Expected<...> then that was threaded up to its users.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now the use of
errorToErrorCode() is still used in two places yet to be fully converted.
llvm-svn: 271332
At some point we're going to need libObject to have this dependency, but as it is now this is causing too many headaches. This commit will reduce the linkage to just llvm-objdump where it is strictly needed, and we'll cross the libObject bridge later when we need it.
llvm-svn: 270866
Fix was:
1) Had to regenerate dwarfdump-test-zlib.elf-x86-64, dwarfdump-test-zlib-gnu.elf-x86-64
(because llvm-symbolizer-zlib.test uses that inputs for its purposes and failed).
2) Updated llvm-symbolizer-zlib.test (updated used call function address to match new files +
added one more check for newly created dwarfdump-test-zlib-gnu.elf-x86-64 binary input).
3) Updated comment in dwarfdump-test-zlib.cc.
Original commit message:
[llvm-dwarfdump] - Teach dwarfdump to decompress debug sections in zlib style.
Before this llvm-dwarfdump only recognized zlib-gnu compression style of headers,
this patch adds support for zlib style.
It looks reasonable to support both styles for dumping,
even if we are not going to suport generating of deprecated gnu one.
Differential revision: http://reviews.llvm.org/D20470
llvm-svn: 270557
fix: forgot to commit the updated dwarfdump-test-zlib.elf-x86-64
Original commit message:
[llvm-dwarfdump] - Teach dwarfdump to decompress debug sections in zlib style.
Before this llvm-dwarfdump only recognized zlib-gnu compression style of headers,
this patch adds support for zlib style.
It looks reasonable to support both styles for dumping,
even if we are not going to suport generating of deprecated gnu one.
Differential revision: http://reviews.llvm.org/D20470
llvm-svn: 270543
Before this llvm-dwarfdump only recognized zlib-gnu compression style of headers,
this patch adds support for zlib style.
It looks reasonable to support both styles for dumping,
even if we are not going to suport generating of deprecated gnu one.
Differential revision: http://reviews.llvm.org/D20470
llvm-svn: 270540
to llvm-objdump. This section is created with -fembed-bitcode option.
This requires the use of libxar and the Cmake and lit support were crafted by
Chris Bieneman!
rdar://26202242
llvm-svn: 270491
MC only needs to know if the output is PIC or not. It never has to
decide about creating GOTs and PLTs for example. The only thing that
MC itself uses this information for is expanding "macros" in sparc and
mips. The rest I am pretty sure could be moved to CodeGen.
This is a cleanup and isolates the code from future changes to
Reloc::Model.
llvm-svn: 269909
when the object is in an archive to use something like libx.a(foo.o) as part of
the error message.
Also changed llvm-objdump and llvm-size to be like llvm-nm and ignore non-object
files in archives and not produce any error message.
To do this Archive::Child::getAsBinary() was changed from ErrorOr<...> to
Expected<...> then that was threaded up to its users.
Converting this interface to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now the use of
errorToErrorCode() is still used in one place yet to be fully converted.
Again there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comments for those.
llvm-svn: 269784
When updating an existing archive, llvm-ar opens the old archive into a
`MemoryBuffer`, does its thing, and writes the results to a temporary
file. That file is then renamed to the original archive filename, thus
replacing it with the updated contents. However, on Windows at least,
what would happen is that the `MemoryBuffer` for the old archive would
actually be an mmap'ed view of the file, so when it came time to do the
rename via Win32's `ReplaceFile`, it would succeed but would be unable
to fully replace the file since there would still be a handle open on
it; instead, the old version got renamed to a random temporary name and
left behind.
Patch by Cameron!
llvm-svn: 268916
part of the error message.
As the caller is the one that needs to add the name of where the "object file"
comes from to the error message as the object file could be in an archive, or
coming from a slice of a Mach-O universal file or a buffer created by a JIT.
In the cases of a Mach-O universal file the architecture name may or may not
also need to be printed which is up to the tool code. For example if the tool
code is only selecting the host architecture slice then that architecture name
is never printed.
This patch is the change to the libObject code and there will be follow on
commits for changes to the code for each tool.
llvm-svn: 268789
load commands.
The existing test case in test/Object/macho-invalid.test for
macho-invalid-too-small-segment-load-command has a cmdsize of 55, while
being too small also it is not a multiple of 4. So when that check is added
this test case will produce a different error. So I constructed a new test case
that will trigger the intended error.
I also changed the error message to be consistent with the other malformed Mach-O
file error messages which prints the load command index. I also removed both
object_error::macho_load_segment_too_small and
object_error::macho_load_segment_too_many_sections from Object/Error.h
as they are not needed and can just use object_error::parse_failed and let the
error message string distinguish the specific error.
llvm-svn: 268652
command has a size less than 8 bytes.
I think the existing test case in test/Object/macho-invalid.test for
macho64-invalid-too-small-load-command was trying to test for this but that
test case triggered a different error given how it was constructed. So I
constructed a new test case that would trigger this specific error.
I also changed the error message to be consistent with the other malformed Mach-O
file error messages. I also removed object_error::macho_small_load_command from
Object/Error.h as it is not needed and can just use object_error::parse_failed
and let the error message string distinguish the error.
llvm-svn: 268463
command other than the first one is past the end of the load commands.
This is like the test case in test/Object/macho-invalid.test for
macho64-invalid-incomplete-load-command but it is the second load command
that is past the end of all the load commands instead of the first.
The code in the constructor for MachOObjectFile that loops over the load
commands used getNextLoadCommandInfo() which was not producing
a good error message. So that was fixed and a test case was added.
llvm-svn: 268403
Produce another specific error message for a malformed Mach-O file when a symbol’s
section index is more than the number of sections. The existing test case in test/Object/macho-invalid.test
for macho-invalid-section-index-getSectionRawName now reports the error with the message indicating
that a symbol at a specific index has a bad section index and that bad section index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
"// TODO: Actually report errors helpfully" and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
llvm-svn: 268298
Only one consumer (llvm-objdump) actually cared about the fact that there were
two triples. Others were actively working around the fact that the Triple
returned by getArch might have been invalid. As for llvm-objdump, it needs to
be acutely aware of both Triples anyway, so being generic in the exposed API is
no benefit.
Also rename the version of getArch returning a Triple. Users were having to
pass an unwanted nullptr to disambiguate the two, which was nasty.
The only functional change here is that armv7m and armv7em object files no
longer crash llvm-objdump.
llvm-svn: 267249
This removes the interfaces added (and not yet complete) to support
lazy reading of summaries. This support is not expected to be needed
since we are moving to a model where the full index is only being
traversed in the thin link step, instead of the back ends.
(The second part of this that I plan to do next is remove the
GlobalValueInfo from the ModuleSummaryIndex - it was mostly needed to
support lazy parsing of summaries. The index can instead reference the
summary structures directly.)
llvm-svn: 267097
Produce another specific error message for a malformed Mach-O file when a symbol’s
string index is past the end of the string table. The existing test case in test/Object/macho-invalid.test
for macho-invalid-symbol-name-past-eof now reports the error with the message indicating
that a symbol at a specific index has a bad sting index and that bad string index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same. There is some
code for this that could be factored into a routine but I would like to leave that for
the code owners post-commit to do as they want for handling an llvm::Error. An
example of how this could be done is shown in the diff in
lib/ExecutionEngine/RuntimeDyld/RuntimeDyldImpl.h which had a Check() routine
already for std::error_code so I added one like it for llvm::Error .
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there fixes needed to lld that goes along with this that I will commit right after this.
So expect lld not to built after this commit and before the next one.
llvm-svn: 266919
Wolfgang Pieb