In lit tests, we run each LLD invocation twice (LLD_IN_TEST=2), without shutting down the process in-between. This ensures a full cleanup is properly done between runs.
Only active for the COFF driver for now. Other drivers still use LLD_IN_TEST=1 which executes just one iteration with full cleanup, like before.
When the environment variable LLD_IN_TEST is unset, a shortcut is taken, only one iteration is executed, no cleanup for faster exit, like before.
A public API, lld::safeLldMain(), is also available when using LLD as a library.
Differential Revision: https://reviews.llvm.org/D70378
The `intrinsics_gen` target exists in the CMake exports since r309389
(see LLVMConfig.cmake.in), hence projects can depend on `intrinsics_gen`
even it they are built separately from LLVM.
Reviewed By: MaskRay, JDevlieghere
Differential Revision: https://reviews.llvm.org/D83454
With this, a simple hello world links against libSystem.tbd and the
old ld64.lld linker kind of works again with newer SDKs.
The motivation here is to have an arm64 cross linker that's good
enough to be able to run simple configure link checks on non-mac
systems for generating config.h files. Once -flavor darwinnew can
link arm64, we'll switch to that.
The LLVM code base already uses C++14, use std::make_unique
to avoid the explicit constructor invocation via new and to avoid
spelling out the type twice.
Essentially takes the lld/Common/Threads.h wrappers and moves them to
the llvm/Support/Paralle.h algorithm header.
The changes are:
- Remove policy parameter, since all clients use `par`.
- Rename the methods to `parallelSort` etc to match LLVM style, since
they are no longer C++17 pstl compatible.
- Move algorithms from llvm::parallel:: to llvm::, since they have
"parallel" in the name and are no longer overloads of the regular
algorithms.
- Add range overloads
- Use the sequential algorithm directly when 1 thread is requested
(skips task grouping)
- Fix the index type of parallelForEachN to size_t. Nobody in LLVM was
using any other parameter, and it made overload resolution hard for
for_each_n(par, 0, foo.size(), ...) because 0 is int, not size_t.
Remove Threads.h and update LLD for that.
This is a prerequisite for parallel public symbol processing in the PDB
library, which is in LLVM.
Reviewed By: MaskRay, aganea
Differential Revision: https://reviews.llvm.org/D79390
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
One instance looks like a false positive:
lld/ELF/Relocations.cpp:1622:14: note: use reference type 'const std::pair<ThunkSection *, uint32_t> &' (aka 'cons
t pair<lld:🧝:ThunkSection *, unsigned int> &') to prevent copying
for (const std::pair<ThunkSection *, uint32_t> ts : isd->thunkSections)
It is not changed in this commit.
This fixes an invalid constant used to detect the reserved range when
reading the compilation unit header. See also: D64622 and D65039.
Differential Revision: https://reviews.llvm.org/D71546
Remove the lld::enableColors function, as it just obscures which
stream it's affecting, and replace with explicit calls to the stream's
enable_colors.
Also, assign the stderrOS and stdoutOS globals first in link function,
just to ensure nothing might use them.
(Either change individually fixes the issue of using the old
stream, but both together seems best.)
Follow-up to b11386f9be.
Differential Revision: https://reviews.llvm.org/D70492
This reverts commit 17e37ba57a
because it introduced a circular dependency between Core and Common.
Because d0371f4736 fixed a build issue,
we no longer need that dependency.
This change is for those who use lld as a library. Context:
https://reviews.llvm.org/D70287
This patch adds a new parmeter to lld::*::link() so that we can pass
an raw_ostream object representing stdout. Previously, lld::*::link()
took only an stderr object.
Justification for making stdoutOS and stderrOS mandatory: I wanted to
make link() functions to take stdout and stderr in that order.
However, if we change the function signature from
bool link(ArrayRef<const char *> args, bool canExitEarly,
raw_ostream &stderrOS = llvm::errs());
to
bool link(ArrayRef<const char *> args, bool canExitEarly,
raw_ostream &stdoutOS = llvm::outs(),
raw_ostream &stderrOS = llvm::errs());
, then the meaning of existing code that passes stderrOS silently
changes (stderrOS would be interpreted as stdoutOS). So, I chose to
make existing code not to compile, so that developers can fix their
code.
Differential Revision: https://reviews.llvm.org/D70292
Works on this dependency chain:
ArrayRef.h ->
Hashing.h -> --CUT--
Host.h ->
StringMap.h / StringRef.h
ArrayRef is very popular, but Host.h is rarely needed. Move the
IsBigEndianHost constant to SwapByteOrder.h. Clients of that header are
more likely to need it.
llvm-svn: 375316
Summary:
The following patch avoids segfaulting if the section list is empty when writing a mach-o MH_OBJECT. I ran into this case from a more complicated example trying to dead_strip while using '-r' in lld.
I'm not sure if having empty sections is a legal mach-o, but it does seem that other llvm-binutils tools can ingest such a boring object with out issue. Would it be better to emit an error, emit a warning, or do nothing? It seems that adding a warning diagnostic might be helpful to users, as I did not expect to have a section-less object when the linker was done.
Reviewers: kledzik, ruiu
Subscribers: llvm-commits, jrm
Tags: #lld, #llvm
Differential Revision: https://reviews.llvm.org/D67735
llvm-svn: 372995
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
Differential revision: https://reviews.llvm.org/D66259
llvm-svn: 368936
1. raw_ostream supports ANSI colors so that you can write messages to
the termina with colors. Previously, in order to change and reset
color, you had to call `changeColor` and `resetColor` functions,
respectively.
So, if you print out "error: " in red, for example, you had to do
something like this:
OS.changeColor(raw_ostream::RED);
OS << "error: ";
OS.resetColor();
With this patch, you can write the same code as follows:
OS << raw_ostream::RED << "error: " << raw_ostream::RESET;
2. Add a boolean flag to raw_ostream so that you can disable colored
output. If you disable colors, changeColor, operator<<(Color),
resetColor and other color-related functions have no effect.
Most LLVM tools automatically prints out messages using colors, and
you can disable it by passing a flag such as `--disable-colors`.
This new flag makes it easy to write code that works that way.
Differential Revision: https://reviews.llvm.org/D65564
llvm-svn: 367649
This patch does the same thing as r365595 to other subdirectories,
which completes the naming style change for the entire lld directory.
With this, the naming style conversion is complete for lld.
Differential Revision: https://reviews.llvm.org/D64473
llvm-svn: 365730
Make some small adjustment while touching the code: make parameters
const, use less_first(), etc.
Differential Revision: https://reviews.llvm.org/D60989
llvm-svn: 358943
Patch by Nicholas Allegra.
The Mach-O writer calculates the size of load commands multiple times.
First, Util::assignAddressesToSections() (in MachONormalizedFileFromAtoms.cpp)
calculates the size using headerAndLoadCommandsSize() (in
MachONormalizedFileBinaryWriter.cpp), which creates a temporary
MachOFileLayout for the NormalizedFile, only to retrieve its
headerAndLoadCommandsSize. Later, writeBinary() (in
MachONormalizedFileBinaryWriter.cpp) creates a new layout and uses the offsets
from that layout to actually write out everything in the NormalizedFile.
But the NormalizedFile changes between the first computation and the second.
When Util::assignAddressesToSections is called, file.functionStarts is always
empty because Util::addFunctionStarts has not yet been called. Yet
MachOFileLayout decides whether to include a LC_FUNCTION_STARTS command based
on whether file.functionStarts is nonempty. Therefore, the initial computation
always omits it.
Because padding for the __TEXT segment (to make its size a multiple of the
page size) is added between the load commands and the first section, LLD still
generates a valid binary as long as the amount of padding happens to be large
enough to fit LC_FUNCTION_STARTS command, which it usually is.
However, it's easy to reproduce the issue by adding a section of a precise
size. Given foo.c:
__attribute__((section("__TEXT,__foo")))
char foo[0xd78] = {0};
Run:
clang -dynamiclib -o foo.dylib foo.c -fuse-ld=lld -install_name
/usr/lib/foo.dylib
otool -lvv foo.dylib
This should produce:
truncated or malformed object (offset field of section 1 in LC_SEGMENT_64
command 0 not past the headers of the file)
This commit:
- Changes MachOFileLayout to always assume LC_FUNCTION_STARTS is present for
the initial computation, as long as generating LC_FUNCTION_STARTS is
enabled. It would be slightly better to check whether there are actually
any functions, since no LC_FUNCTION_STARTS will be generated if not, but it
doesn't cause a problem if the initial computation is too high.
- Adds a test.
- Adds an assert in MachOFileLayout::writeSectionContent() that we are not
writing section content into the load commands region (which would happen
if the offset was calculated too low due to the initial load commands size
calculation being too low). Adds an assert in
MachOFileLayout::writeLoadCommands to validate a similar situation where
two size-of-load-commands computations are expected to be equivalent.
llvm-svn: 358545
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
Summary: Before, OptTable::PrintHelp append "[options] <inputs>" to its parameter `Help`. It is more flexible to change its semantic to `Usage` and let user customize the usage line.
Reviewers: rupprecht, ruiu, espindola
Reviewed By: rupprecht
Subscribers: emaste, sbc100, arichardson, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D53054
llvm-svn: 344099
This is a minor follow-up to https://reviews.llvm.org/D49189. On Windows, lld
used to print "lld-link.exe: error: ...". Now it just prints "lld-link: error:
...". This matches what link.exe does (it prints "LINK : ...") and makes lld's
output less dependent on the host system.
https://reviews.llvm.org/D51133
llvm-svn: 340487
lld currently prepends the absolute path to itself to every diagnostic it
emits. This path can be longer than the diagnostic, and makes the actual error
message hard to read.
There isn't a good reason for printing this path: if you want to know which lld
you're running, pass -v to clang – chances are that if you're unsure of this,
you're not only unsure when it errors out. Some people want an indication that
the diagnostic is from the linker though, so instead print just the basename of
the linker's path.
Before:
```
$ out/bin/clang -target x86_64-unknown-linux -x c++ /dev/null -fuse-ld=lld
/Users/thakis/src/llvm-mono/out/bin/ld.lld: error: cannot open crt1.o: No such file or directory
/Users/thakis/src/llvm-mono/out/bin/ld.lld: error: cannot open crti.o: No such file or directory
/Users/thakis/src/llvm-mono/out/bin/ld.lld: error: cannot open crtbegin.o: No such file or directory
/Users/thakis/src/llvm-mono/out/bin/ld.lld: error: unable to find library -lgcc
/Users/thakis/src/llvm-mono/out/bin/ld.lld: error: unable to find library -lgcc_s
/Users/thakis/src/llvm-mono/out/bin/ld.lld: error: unable to find library -lc
/Users/thakis/src/llvm-mono/out/bin/ld.lld: error: unable to find library -lgcc
/Users/thakis/src/llvm-mono/out/bin/ld.lld: error: unable to find library -lgcc_s
/Users/thakis/src/llvm-mono/out/bin/ld.lld: error: cannot open crtend.o: No such file or directory
/Users/thakis/src/llvm-mono/out/bin/ld.lld: error: cannot open crtn.o: No such file or directory
clang: error: linker command failed with exit code 1 (use -v to see invocation)
```
After:
```
$ out/bin/clang -target x86_64-unknown-linux -x c++ /dev/null -fuse-ld=lld
ld.lld: error: cannot open crt1.o: No such file or directory
ld.lld: error: cannot open crti.o: No such file or directory
ld.lld: error: cannot open crtbegin.o: No such file or directory
ld.lld: error: unable to find library -lgcc
ld.lld: error: unable to find library -lgcc_s
ld.lld: error: unable to find library -lc
ld.lld: error: unable to find library -lgcc
ld.lld: error: unable to find library -lgcc_s
ld.lld: error: cannot open crtend.o: No such file or directory
ld.lld: error: cannot open crtn.o: No such file or directory
clang: error: linker command failed with exit code 1 (use -v to see invocation)
```
https://reviews.llvm.org/D49189
llvm-svn: 337634
Summary:
Any invocation of `clang -fuse-ld=lld` that results in a link command
on a macOS host currently fails, because the Darwin lld driver does not
recognize the `-lto_library` option that Clang passes it. Fix the error
by having the Darwin driver ignore the option.
The Clang driver's macOS toolchain is written such that it will always
pass the `-lto_library` option to the linker invocation on a macOS host.
And although the DarwinLdDriver is written to ignore any unknown arguments,
because `-lto_library` begins with `-l`, the DarwinLdDriver interprets it
as a library search command, for a library named "to_library". When the
DarwinLdDriver is unable to find a library specified via `-l`, it exits
with a hard error. This causes any invocation of `clang -fuse-ld=lld`
that results in a link command on a macOS host to fail with an error.
To fix the issue, I considered two alternatives:
1. Modify the Clang Darwin toolchain to only pass `-lto_library` if lld
is *not* being used. lld doesn't support LTO on Darwin anyway, so it
can't use the option. However, I opted against this because, if and
when lld *does* support LTO on Darwin, I'll have to make another
commit to Clang in order to get it to pass the option to lld again.
2. Modify the Darwin lld driver to ignore the `-lto_library` option.
Just in case users may take this to mean LTO is supported, I also
added a warning. If and when lld supports LTO on Darwin, the same
commit that adds support for this option can remove the warning.
Option (2) seemed better to me, and is the rationale behind this commit.
Test Plan: check-lld
Reviewers: ruiu, smeenai, pcc
Reviewed By: smeenai
Subscribers: JDevlieghere, pcc, mehdi_amini, inglorion, steven_wu, llvm-commits
Differential Revision: https://reviews.llvm.org/D47994
llvm-svn: 334641
Summary:
Error handling in liblldCore and the Darwin toolchain prints to an
output stream. A TODO in the project explained that a diagnostics
interface resembling Clang's should be added.
For now, the simple diagnostics interface defined in liblldCommon seems
like an improvement. It prints colors when they're available, uses locks
for thread-safety, and abstracts away the `"error: "` and newline
literal strings that litter the Darwin toolchain code.
To use the liblldCommon error handler, a link dependency is added to
the liblldDriver library.
Test Plan:
1. check-lld
2. Invoke `ld64.lld -r` in a terminal that supports color output.
Confirm that "ld64.lld: error: -arch not specified and could not be inferred"
is output, and that the "error:" is colored red!
Reviewers: ruiu, smeenai
Reviewed By: ruiu
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D47998
llvm-svn: 334466
Summary: This is similar to D46290 D46320.
Reviewers: ruiu, grimar
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D46861
llvm-svn: 332372
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
Differential Revision: https://reviews.llvm.org/D44977
llvm-svn: 332351
Alexandre Ganea