Small code model global variable access on PPC64 has a very limited range of
addressing. The instructions the relocations are used on add an offset in the
range [-0x8000, 0x7FFC] to the toc pointer which points to .got +0x8000, giving
an addressable range of [.got, .got + 0xFFFC]. While user code can be recompiled
with medium and large code models when the binary grows too large for small code
model, there are small code model relocations in the crt files and libgcc.a
which are typically shipped with the distros, and the ABI dictates that linkers
must allow linking of relocatable object files using different code models.
To minimze the chance of relocation overflow, any file that contains a small
code model relocation should have its .toc section placed closer to the .got
then any .toc from a file without small code model relocations.
Differential Revision: https://reviews.llvm.org/D56920
llvm-svn: 351978
Enable full support for the debug info. Recommit to fix the emission of
the not required closing brace.
Differential revision: https://reviews.llvm.org/D46189
llvm-svn: 351972
This fixes https://bugs.llvm.org/show_bug.cgi?id=40072.
GNU addr2line's --functions switch is off by default, has a short alias
of -f, and does not take an argument. This patch changes llvm-symbolizer
to allow the second and third point (changing the default behaviour may
have negative impacts on users). If the option is missing a value, it
now treats it as "linkage".
This change does cause one previously valid command-line to behave
differently. Before --functions <value> was accepted, but now only
--functions=<value> is allowed (as well as --functions). The old
behaviour will result in the value being treated as a positional
argument.
The previous testing for --functions=short has been pulled out into a
new test that also tests the other accepted values and option formats.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D57049
llvm-svn: 351968
This patch adds a new ReadAdvance definition named ReadInt2Fpu.
ReadInt2Fpu allows x86 scheduling models to accurately describe delays caused by
data transfers from the integer unit to the floating point unit.
ReadInt2Fpu currently defaults to a delay of zero cycles (i.e. no delay) for all
x86 models excluding BtVer2. That means, this patch is only a functional change
for the Jaguar cpu model only.
Tablegen definitions for instructions (V)PINSR* have been updated to account for
the new ReadInt2Fpu. That read is mapped to the the GPR input operand.
On Jaguar, int-to-fpu transfers are modeled as a +6cy delay. Before this patch,
that extra delay was added to the opcode latency. In practice, the insert opcode
only executes for 1cy. Most of the actual latency is actually contributed by the
so-called operand-latency. According to the AMD SOG for family 16h, (V)PINSR*
latency is defined by expression f+1, where f is defined as a forwarding delay
from the integer unit to the fpu.
When printing instruction latency from MCA (see InstructionInfoView.cpp) and LLC
(only when flag -print-schedule is speified), we now need to account for any
extra forwarding delays. We do this by checking if scheduling classes declare
any negative ReadAdvance entries. Quoting a code comment in TargetSchedule.td:
"A negative advance effectively increases latency, which may be used for
cross-domain stalls". When computing the instruction latency for the purpose of
our scheduling tests, we now add any extra delay to the formula. This avoids
regressing existing codegen and mca schedule tests. It comes with the cost of an
extra (but very simple) hook in MCSchedModel.
Differential Revision: https://reviews.llvm.org/D57056
llvm-svn: 351965
In r287786, a bug was introduced into llvm-readelf where it didn't print
the static symbol table if both --symbols and --dyn-symbols were
specified, even if there was no dynamic symbol table. This is obviously
incorrect.
This patch fixes this issue, by delegating the decision of which symbol
tables should be printed to the final dumper, rather than trying to
decide in the command-line option handling layer. The decision was made
to follow the approach taken in this patch because the LLVM style dumper
uses a different order to the original GNU style behaviour (and GNU
readelf) for ELF output. Other approaches resulted in behaviour changes
for other dumpers which felt wrong. In particular, I wanted to avoid
changing the order of the output for --symbols --dyn-symbols for LLVM
style, keep what is emitted by --symbols unchanged for all dumpers, and
avoid having different orders of .dynsym and .symtab dumping for GNU
"--symbols" and "--symbols --dyn-symbols".
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D57016
llvm-svn: 351960
This patch replaces the existing LLVMVectorSameWidth matcher with LLVMScalarOrSameVectorWidth.
The matching args must be either scalars or vectors with the same number of elements, but in either case the scalar/element type can differ, specified by LLVMScalarOrSameVectorWidth.
I've updated the _overflow intrinsics to demonstrate this - allowing it to return a i1 or <N x i1> overflow result, matching the scalar/vectorwidth of the other (add/sub/mul) result type.
The masked load/store/gather/scatter intrinsics have also been updated to use this, although as we specify the reference type to be llvm_anyvector_ty we guarantee the mask will be <N x i1> so no change in behaviour
Differential Revision: https://reviews.llvm.org/D57090
llvm-svn: 351957
Summary:
With XNACK, an smem load whose result is coalesced with an operand (thus
it overwrites its own operand) cannot appear in a clause, because some
other instruction might XNACK and restart the whole clause.
The clause breaker already realized that an smem that overwrites an
operand cannot appear in a clause, and broke the clause. The problem
that this commit fixes is that the SIFormMemoryClauses optimization
formed a bundle with early clobber, which caused the earlier code that
set up the coalesced operand to be removed as dead.
Differential Revision: https://reviews.llvm.org/D57008
Change-Id: I703c4d5b0bf7d6060222bec491f45c18bb3c0016
llvm-svn: 351950
The aux symbols were stored in an opaque std::vector<uint8_t>,
with contents interpreted according to the rest of the symbol.
All aux symbol types but one fit in 18 bytes (sizeof(coff_symbol16)),
and if written to a bigobj, two extra padding bytes are written (as
sizeof(coff_symbol32) is 20). In the storage agnostic intermediate
representation, store the aux symbols as a series of coff_symbol16
sized opaque blobs. (In practice, all such aux symbols only consist
of one aux symbol, so this is more flexible than what reality needs.)
The special case is the file aux symbols, which are written in
potentially more than one aux symbol slot, without any padding,
as one single long string. This can't be stored in the same opaque
vector of fixed sized aux symbol entries. The file aux symbols will
occupy a different number of aux symbol slots depending on the type
of output object file. As nothing in the intermediate process needs
to have accurate raw symbol indices, updating that is moved into the
writer class.
Differential Revision: https://reviews.llvm.org/D57009
llvm-svn: 351947
These are no longer necessary as the testcase now seems to run fine
on the buildbots that previously failed on this case, after SVN r351934.
llvm-svn: 351946
With ObjCPropertyDecl, ASTNode.OrigD can be a ObjCPropertyImplDecl
which is not a NamedDecl, leading to a crash since the code
incorrectly assumes ASTNode.OrigD will always be a NamedDecl.
Change by dgoldman (David Goldman)!
Differential Revision: https://reviews.llvm.org/D56916
llvm-svn: 351941
Currently, disassembleObject() is a ~550 lines length function.
This patch splits it into two, where first do all helper objects initializations
and calls the second which does all the rest job.
This is a straightforward split.
Differential revision: https://reviews.llvm.org/D57020
llvm-svn: 351940
Currently in Arm code, we allocate LR first, under the assumption that
it needs to be saved anyway. Unfortunately this has the disadvantage
that it will require any instructions using it to be the longer thumb2
instructions, not the shorter thumb1 ones.
This switches the order when we are optimising for minsize, returning to
the default order so that more lower registers can be used. It can end
up requiring more pushed registers, but on average produces smaller code.
Differential Revision: https://reviews.llvm.org/D56008
llvm-svn: 351938
In the last stage of type promotion, we replace any zext that uses a
new trunc with the operand of the trunc. This is okay when we only
allowed one type to be optimised, but now its the case that the trunc
maybe needed to produce a more narrow type than the one we were
optimising for. So we need to check this before doing the replacement.
Differential Revision: https://reviews.llvm.org/D57041
llvm-svn: 351935
The current check in CombineToPreIndexedLoadStore is too
conversative, preventing a pre-indexed store when the base pointer
is a predecessor of the value being stored. Instead, we should check
the pointer operand of the store.
Differential Revision: https://reviews.llvm.org/D56719
llvm-svn: 351933
This was reverted since it broke a couple buildbots. The reason
for the breakage is not yet known, but this time, the test has
got more diagnostics added, to hopefully allow figuring out
what goes wrong.
Differential Revision: https://reviews.llvm.org/D57007
llvm-svn: 351931
As part of speculation hardening, the stack pointer gets masked with the
taint register (X16) before a function call or before a function return.
Since there are no instructions that can directly mask writing to the
stack pointer, the stack pointer must first be transferred to another
register, where it can be masked, before that value is transferred back
to the stack pointer.
Before, that temporary register was always picked to be x17, since the
ABI allows clobbering x17 on any function call, resulting in the
following instruction pattern being inserted before function calls and
returns/tail calls:
mov x17, sp
and x17, x17, x16
mov sp, x17
However, x17 can be live in those locations, for example when the call
is an indirect call, using x17 as the target address (blr x17).
To fix this, this patch looks for an available register just before the
call or terminator instruction and uses that.
In the rare case when no register turns out to be available (this
situation is only encountered twice across the whole test-suite), just
insert a full speculation barrier at the start of the basic block where
this occurs.
Differential Revision: https://reviews.llvm.org/D56717
llvm-svn: 351930
Two backend optimizations failed to handle cases when compiled with -g, due
to failing to consider DBG_VALUE instructions. This was in
SystemZTargetLowering::emitSelect() and
SystemZElimCompare::getRegReferences().
This patch makes sure that DBG_VALUEs are recognized so that they do not
affect these optimizations.
Tests for branch-on-count, load-and-trap and consecutive selects.
Review: Ulrich Weigand
https://reviews.llvm.org/D57048
llvm-svn: 351928
This patch relaxes restrictions on types of latch condition and range check.
In current implementation, they should match. This patch allows to handle
wide range checks against narrow condition. The motivating example is the
following:
int N = ...
for (long i = 0; (int) i < N; i++) {
if (i >= length) deopt;
}
In this patch, the option that enables this support is turned off by
default. We'll wait until it is switched to true.
Differential Revision: https://reviews.llvm.org/D56837
Reviewed By: reames
llvm-svn: 351926
#pragma clang loop pipeline(disable)
Disable SWP optimization for the next loop.
“disable” is the only possible value.
#pragma clang loop pipeline_initiation_interval(number)
Set value of initiation interval for SWP
optimization to specified number value for
the next loop. Number is the positive value
greater than 0.
These pragmas could be used for debugging or reducing
compile time purposes. It is possible to disable SWP for
concrete loops to save compilation time or to find bugs
by not doing SWP to certain loops. It is possible to set
value of initiation interval to concrete number to save
compilation time by not doing extra pipeliner passes or
to check created schedule for specific initiation interval.
That is llvm part of the fix
Clang part of fix: https://reviews.llvm.org/D55710
Patch by Alexey Lapshin!
Differential Revision: https://reviews.llvm.org/D56403
llvm-svn: 351923
Reid Kleckner