Allow pointwise operations to take rank zero input tensors similarly to scalar inputs. Use an empty indexing map to broadcast rank zero tensors to the iteration domain of the operation.
Depends On D120734
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D120807
Extend OpDSL with a `defines` method that can set the `hasCanonicalizer` flag for an OpDSL operation. If the flag is set via `defines(Canonicalizer)` the operation needs to implement the `getCanonicalizationPatterns` method. The revision specifies the flag for linalg.fill_tensor and adds an empty `FillTensorOp::getCanonicalizationPatterns` implementation.
This revision is a preparation step to replace linalg.fill by its OpDSL counterpart linalg.fill_tensor. The two are only functionally equivalent if both specify the same canonicalization patterns. The revision is thus a prerequisite for the linalg.fill replacement.
Depends On D120725
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D120726
There is no reason for this file to be at the top-level, and
its current placement predates the Parser/ folder's existence.
Differential Revision: https://reviews.llvm.org/D121024
The revision extends OpDSL with unary and binary function attributes. A function attribute, makes the operations used in the body of a structured operation configurable. For example, a pooling operation may take an aggregation function attribute that specifies if the op shall implement a min or a max pooling. The goal of this revision is to define less and more flexible operations.
We may thus for example define an element wise op:
```
linalg.elem(lhs, rhs, outs=[out], op=BinaryFn.mul)
```
If the op argument is not set the default operation is used.
Depends On D120109
Reviewed By: nicolasvasilache, aartbik
Differential Revision: https://reviews.llvm.org/D120110
Split arithmetic function into unary and binary functions. The revision prepares the introduction of unary and binary function attributes that work similar to type function attributes.
Depends On D120108
Reviewed By: aartbik
Differential Revision: https://reviews.llvm.org/D120109
Prepare the OpDSL function handling to introduce more function classes. A follow up commit will split ArithFn into UnaryFn and BinaryFn. This revision prepares the split by adding a function kind enum to handle different function types using a single class on the various levels of the stack (for example, there is now one TensorFn and one ScalarFn).
Depends On D119718
Reviewed By: aartbik
Differential Revision: https://reviews.llvm.org/D120108
Previously, OpDSL operation used hardcoded type conversion operations (cast or cast_unsigned). Supporting signed and unsigned casts thus meant implementing two different operations. Type function attributes allow us to define a single operation that has a cast type function attribute which at operation instantiation time may be set to cast or cast_unsigned. We may for example, defina a matmul operation with a cast argument:
```
@linalg_structured_op
def matmul(A=TensorDef(T1, S.M, S.K), B=TensorDef(T2, S.K, S.N), C=TensorDef(U, S.M, S.N, output=True),
cast=TypeFnAttrDef(default=TypeFn.cast)):
C[D.m, D.n] += cast(U, A[D.m, D.k]) * cast(U, B[D.k, D.n])
```
When instantiating the operation the attribute may be set to the desired cast function:
```
linalg.matmul(lhs, rhs, outs=[out], cast=TypeFn.cast_unsigned)
```
The revsion introduces a enum in the Linalg dialect that maps one-by-one to the type functions defined by OpDSL.
Reviewed By: aartbik
Differential Revision: https://reviews.llvm.org/D119718
Adapt the region builder signature to hand in the attributes of the created ops. The revision is a preparation step the support named ops that need access to the operation attributes during op creation.
Depends On D119692
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D119693
Index attributes had no default value, which means the attribute values had to be set on the operation. This revision adds a default parameter to `IndexAttrDef`. After the change, every index attribute has to define a default value. For example, we may define the following strides attribute:
```
```
When using the operation the default stride is used if the strides attribute is not set. The mechanism is implemented using `DefaultValuedAttr`.
Additionally, the revision uses the naming index attribute instead of attribute more consistently, which is a preparation for follow up revisions that will introduce function attributes.
Depends On D119125
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D119126
Previously, OpDSL did not support rank polymorphism, which required a separate implementation of linalg.fill. This revision extends OpDSL to support rank polymorphism for a limited class of operations that access only scalars and tensors of rank zero. At operation instantiation time, it scales these scalar computations to multi-dimensional pointwise computations by replacing the empty indexing maps with identity index maps. The revision does not change the DSL itself, instead it adapts the Python emitter and the YAML generator to generate different indexing maps and and iterators depending on the rank of the first output.
Additionally, the revision introduces a `linalg.fill_tensor` operation that in a future revision shall replace the current handwritten `linalg.fill` operation. `linalg.fill_tensor` is thus only temporarily available and will be renamed to `linalg.fill`.
Reviewed By: nicolasvasilache, stellaraccident
Differential Revision: https://reviews.llvm.org/D119003
The revision renames `PrimFn` to `ArithFn`. The name resembles the newly introduced arith dialect that implements most of the arithmetic functions. An exception are log/exp that are part of the math dialect.
Depends On D115239
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D115240
This revision introduces a the `TypeFn` class that similar to the `PrimFn` class contains an extensible set of type conversion functions. Having the same mechanism for both type conversion functions and arithmetic functions improves code consistency. Additionally, having an explicit function class and function name is a prerequisite to specify a conversion or arithmetic function via attribute. In a follow up commits, we will introduce function attributes to make OpDSL operations more generic. In particular, the goal is to handle signed and unsigned computation in one operations. Today, there is a linalg.matmul and a linalg.matmul_unsigned.
The commit implements the following changes:
- Introduce the class of type conversion functions `TypeFn`
- Replace the hardwired cast and cast_unsigned ops by the `TypeFn` counterparts
- Adapt the python and C++ code generation paths to support the new cast operations
Example:
```
cast(U, A[D.m, D.k])
```
changes to
```
TypeFn.cast(U, A[D.m, D.k])
```
Depends On D115237
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D115239
There are several aspects of the API that either aren't easy to use, or are
deceptively easy to do the wrong thing. The main change of this commit
is to remove all of the `getValue<T>`/`getFlatValue<T>` from ElementsAttr
and instead provide operator[] methods on the ranges returned by
`getValues<T>`. This provides a much more convenient API for the value
ranges. It also removes the easy-to-be-inefficient nature of
getValue/getFlatValue, which under the hood would construct a new range for
the type `T`. Constructing a range is not necessarily cheap in all cases, and
could lead to very poor performance if used within a loop; i.e. if you were to
naively write something like:
```
DenseElementsAttr attr = ...;
for (int i = 0; i < size; ++i) {
// We are internally rebuilding the APFloat value range on each iteration!!
APFloat it = attr.getFlatValue<APFloat>(i);
}
```
Differential Revision: https://reviews.llvm.org/D113229
After removing the last LinalgOps that have no region attached we can verify there is a region. The patch performs the following changes:
- Move the SingleBlockImplicitTerminator trait further up the the structured op base class.
- Adapt the LinalgOp verification since the trait only check if there is 0 or 1 block.
- Introduce a getBlock method on the LinalgOp interface.
- Access the LinalgOp body using either getBlock() or getBody() if the concrete operation type is known.
This patch is a follow up to https://reviews.llvm.org/D111233.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D111393
Update OpDSL to support unsigned integers by adding unsigned min/max/cast signatures. Add tests in OpDSL and on the C++ side to verify the proper signed and unsigned operations are emitted.
The patch addresses an issue brought up in https://reviews.llvm.org/D111170.
Reviewed By: rsuderman
Differential Revision: https://reviews.llvm.org/D111230
* This could have been removed some time ago as it only had one op left in it, which is redundant with the new approach.
* `matmul_i8_i8_i32` (the remaining op) can be trivially replaced by `matmul`, which natively supports mixed precision.
Differential Revision: https://reviews.llvm.org/D110792
Interface patterns are unique in that they get added to every operation that also implements that interface, given that they aren't tied to individual operations. When the same interface pattern gets added to multiple operations (such as the current behavior with Linalg), an reference to each of these patterns is added to every op (meaning that an operation will now have N references to effectively the same pattern). This revision fixes this problematic behavior in Linalg, and can bring upwards of a 25% reduction in compile time in Linalg based workloads.
Differential Revision: https://reviews.llvm.org/D104160
The patch extends the yaml code generation to support the following new OpDSL constructs:
- captures
- constants
- iteration index accesses
- predefined types
These changes have been introduced by revision
https://reviews.llvm.org/D101364.
Differential Revision: https://reviews.llvm.org/D102075
To match an interface or trait, users currently have to use the `MatchAny` tag. This tag can be quite problematic for compile time for things like the canonicalizer, as the `MatchAny` patterns may get applied to *every* operation. This revision adds better support by bucketing interface/trait patterns based on which registered operations have them registered. This means that moving forward we will only attempt to match these patterns to operations that have this interface registered. Two simplify defining patterns that match traits and interfaces, two new utility classes have been added: OpTraitRewritePattern and OpInterfaceRewritePattern.
Differential Revision: https://reviews.llvm.org/D98986
This doesn't change APIs, this just cleans up the many in-tree uses of these
names to use the new preferred names. We'll keep the old names around for a
couple weeks to help transitions.
Differential Revision: https://reviews.llvm.org/D99127
Use `MLIR_LINALG_ODS_GEN` and `MLIR_LINALG_ODS_YAML_GEN` variables
instead of `MLIR_LINALG_ODS_GEN_EXE` and `MLIR_LINALG_ODS_YAML_GEN_EXE`.
The former are defined in PARENT SCOPE only, so the `if` condition
is never evaluates to `TRUE`.
The logic should be the following (taken from tblgen part):
1. `TOOL_NAME` - CACHE variable (default equal to target name).
User can override it to actual executable path.
2. `TOOL_NAME_EXE` - internal variable, initialized to `${TOOL_NAME}` first.
In case of cross-compilation (`LLVM_USE_HOST_TOOLS == TRUE`) if user
didn't set own path to native executable via `TOOL_NAME` variable,
CMake will create separate targets to build native tool and
will override `TOOL_NAME_EXE` to the executable produced by this target.
3. `TOOL_NAME_TARGET` - internal variable, which points to tool target name.
If the native tool is built as described above, it will point to the
target correspondant to that native tool.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D98025
Some variables are unused after D97383 landed. We should generate one symbol for one attrUse.
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D97794
These warnings are raised when compiling with gcc due to either having too few or too many commas, or in the case of lldb, the possibility of a nullptr.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D97586
This enables this kind of construct in the DSL to generate a named op that is polymorphic over numeric type variables `T` and `U`, generating the correct arithmetic casts at construction time:
```
@tc_def_op
def polymorphic_matmul(A=TensorDef(T1, S.M, S.K),
B=TensorDef(T2, S.K, S.N),
C=TensorDef(U, S.M, S.N, output=True)):
implements(ContractionOpInterface)
C[D.m, D.n] += cast(U, A[D.m, D.k]) * cast(U, B[D.k, D.n])
```
Presently, this only supports type variables that are bound to the element type of one of the arguments, although a further extension that allows binding a type variable to an attribute would allow some more expressiveness and may be useful for some formulations. This is left to a future patch. In addition, this patch does not yet materialize the verifier support which ensures that types are bound correctly (for such simple examples, failing to do so will yield IR that fails verification, it just won't yet fail with a precise error).
Note that the full grid of extensions/truncation/int<->float conversions are supported, but many of them are lossy and higher level code needs to be mindful of numerics (it is not the job of this level).
As-is, this should be sufficient for most integer matmul scenarios we work with in typical quantization schemes.
Differential Revision: https://reviews.llvm.org/D97603
gysit