Summary:
We cannot call process_up->SetState() inside
the NativeProcessNetBSD::Factory::Launch
function because it triggers a NULL pointer
deference.
The generic code for launching a process in:
GDBRemoteCommunicationServerLLGS::LaunchProcess
sets the m_debugged_process_up pointer after
a successful call to m_process_factory.Launch().
If we attempt to call process_up->SetState()
inside a platform specific Launch function we
end up dereferencing a NULL pointer in
NativeProcessProtocol::GetCurrentThreadID().
Use the proper call process_up->SetState(,false)
that sets notify_delegates to false.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg
Reviewed By: labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D42868
llvm-svn: 324234
into a std::string so we don't run off the end of the array when
there is no nul byte in ProcessElfCore::parseLinuxNotes.
Found with ASAN testing.
<rdar://problem/37134319>
Differential revision: https://reviews.llvm.org/D42828
llvm-svn: 324156
Summary:
The ObjectFile class was used to determine the architecture of a running
process by inspecting it's main executable. There were two issues with
this:
- it's in the wrong layer
- the call can be very expensive (it can end up computing the crc of the
whole file).
Since the process is running on the host, ideally we would be able to
just query the data straight from the OS like darwin does, but there
doesn't seem to be a reasonable way to do that. So, this fixes the
layering issue by using the llvm object library to inspect the file.
Since we know the process is already running on the host, we just need
to peek at a few bytes of the elf header to determine whether it's 32-
or 64-bit (which should make this faster as well).
Pretty much the same logic was implemented in
NativeProcessProtocol::ResolveProcessArchitecture, so I delete this
logic and replace calls with GetProcessInfo.
Reviewers: eugene, krytarowski
Subscribers: mgorny, hintonda, lldb-commits
Differential Revision: https://reviews.llvm.org/D42488
llvm-svn: 323637
Summary:
It's possible to hit an unaligned memory read when reading `source_length` as the `data` array is only aligned with 2 bytes (it's actually a UTF16 array). This patch memcpy's `source_length` into a local variable to prevent this:
```
MinidumpTypes.cpp:49:23: runtime error: load of misaligned address 0x7f0f4792692a for type 'const uint32_t' (aka 'const unsigned int'), which requires 4 byte alignment
```
Reviewers: dvlahovski, zturner, davide
Reviewed By: davide
Subscribers: davide, lldb-commits
Differential Revision: https://reviews.llvm.org/D42348
llvm-svn: 323181
Summary:
This patch implements the ABI Plugin for PPC64le. It was based on the
ABI for PPC64. It also enables LLDB to evaluate expressions using JIT.
Reviewers: labath, clayborg, jhibbits, davide
Reviewed By: labath, clayborg, jhibbits, davide
Subscribers: davide, JDevlieghere, chmeee, emaste, jhibbits, hfinkel, lldb-commits, nemanjai, luporl, lbianc, mgorny, anajuliapc, kbarton
Differential Revision: https://reviews.llvm.org/D41702
Patch by Alexandre Yukio Yamashita <alexandre.yamashita@eldorado.org.br>
llvm-svn: 323100
been specified yet (either by the user, or by one of the lldb
extensions like qHostInfo or qProcessInfo), and the target.xml
includes a <architecture> tag specifying x86_64, set the architecture
appropriately.
I'm not sure what we can expect to see in the <architecture> tag, so
I'm only doing this for x86_64 right now where I've seen "i386:x86_64"
used. I've seen a target.xml from a jtag board that sends just "arm"
because it doesn't know more specifically what type of board it is
connected to...
<rdar://problem/29908970>
llvm-svn: 322339
Summary:
Gdb servers like openocd may send many $O reply packets for the client to output during a qRcmd command sequence. Currently, lldb interprets the first O packet as an unexpected response. Besides generating no output, this causes lldb to get out of sync with future commands because it continues reading O packets from the first command as response to subsequent commands.
This patch handles any O packets during an qRcmd, treating the first non-O packet as the true response.
Preliminary discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013078.html
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D41745
Patch by Owen Shaw <llvm@owenpshaw.net>
llvm-svn: 322190
the previous fix did not work because of different const qualifications
on the envp pointer.
This should resolve that (and remove a couple of const_casts in the
process).
llvm-svn: 322187
Summary:
There was some confusion in the code about how to represent process
environment. Most of the code (ab)used the Args class for this purpose,
but some of it used a more basic StringList class instead. In either
case, the fact that the underlying abstraction did not provide primitive
operations for the typical environment operations meant that even a
simple operation like checking for an environment variable value was
several lines of code.
This patch adds a separate Environment class, which is essentialy a
llvm::StringMap<std::string> in disguise. To standard StringMap
functionality, it adds a couple of new functions, which are specific to
the environment use case:
- (most important) envp conversion for passing into execve() and likes.
Instead of trying to maintain a constantly up-to-date envp view, it
provides a function which creates a envp view on demand, with the
expectation that this will be called as the very last thing before
handing the value to the system function.
- insert(StringRef KeyEqValue) - splits KeyEqValue into (key, value)
pair and inserts it into the environment map.
- compose(value_type KeyValue) - takes a map entry and converts in back
into "KEY=VALUE" representation.
With this interface most of the environment-manipulating code becomes
one-liners. The only tricky part was maintaining compatibility in
SBLaunchInfo, which expects that the environment entries are accessible
by index and that the returned const char* is backed by the launch info
object (random access into maps is hard and the map stores the entry in
a deconstructed form, so we cannot just return a .c_str() value). To
solve this, I have the SBLaunchInfo convert the environment into the
"envp" form, and use it to answer the environment queries. Extra code is
added to make sure the envp version is always in sync.
(This also improves the layering situation as Args was in the Interpreter module
whereas Environment is in Utility.)
Reviewers: zturner, davide, jingham, clayborg
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41359
llvm-svn: 322174
The recent UUID cleanups exposed a bug in the parsing code for the
jModulesInfo response, which was passing wrong value for the second
argument to UUID::SetFromStringRef (it passed the length of the string,
whereas the correct value should be the number of decoded bytes we
expect to receive).
This was not picked up by tests, because they test with 16-byte uuids,
for which the function happens to do the right thing even if the length
does not match (if the length does not match, the function does not
update m_num_uuid_bytes member, but that member is already 16 to begin
with).
I fix that and add a test with 20-byte uuid to catch if this regresses.
I have also added more safeguards into the parsing code to fail if we
cannot parse the entire uuid field we recieve. While testing the latter
part, I noticed that the "negative" jModulesInfo tests were succeeding
because we were sending malformed json (and not because the json
contents was invalid), so I make those tests a bit more robuts as well.
llvm-svn: 320985
Summary:
We were failing to propagate the environment when lldb-server was
started with a pre-loaded process
(e.g.: lldb-server gdbserver -- inferior --inferior_args)
This patch makes sure the environment is propagated. Instead of adding a
new GDBRemoteCommunicationServerLLGS::SetLaunchEnvironment function to
complement SetLaunchArgs and SetLaunchFlags, I replace these with a
more generic SetLaunchInfo, which can be used to set any launch-related
property.
The accompanying test also verifies that the server correctly terminates
the connection after sending the exit packet (specifically, that it does
not send the exit packet twice).
Reviewers: clayborg, eugene
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41070
llvm-svn: 320984
Summary:
The x86 FPR struct was defined as a struct containing a union between
two members: XSAVE and FXSAVE. This patch makes FPR a union directly to
remove one layer of indirection when trying to access the members.
The initial layout of these two structs is identical, which is
recognised by the fact that XSAVE has FXSAVE as its first member, so we
also considered removing one more layer and leave FPR identical to XSAVE
struct, but stopped short of doing that, as the FPR may be used to store
different layouts in the future (e.g., ones generated by the FSAVE
instruction).
Reviewers: clayborg, krytarowski
Subscribers: emaste, lldb-commits
Differential Revision: https://reviews.llvm.org/D41245
llvm-svn: 320966
Summary:
lldb-server was sending the "exit" packet (W??) twice. This happened
because it was handling both the pre-exit (PTRACE_EVENT_EXIT) and
post-exit (WIFEXITED) as exit events. We had some code which was trying
to detect when we've already sent the exit packet, but this stopped
working quite a while ago.
This never really caused any problems in practice because the client
automatically closes the connection after receiving the first packet, so
the only effect of this was some warning messages about extra packets
from the lldb-server test suite, which were ignored because they didn't
fail the test.
The new test suite will be stricter about this, so I fix this issue
ignoring the first event. I think this is the correct behavior, as the
inferior is not really dead at that point, so it's premature to send the
exit packet.
There isn't an actual test yet which would verify the exit behavior, but
in my next patch I will add a test which will also test this
functionality.
Reviewers: eugene
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D41069
llvm-svn: 320961
A similar error message is printed again in lldb-gdbserver.cpp, so the
user will see the message twice. Also, this is generic library code, we
shouldn't really be using stderr here.
llvm-svn: 320704
A few methods in RegisterContext classes accept const objects which are
cast to a non-const thread_state_t. Drop const-ness more explicitly
where we mean to do so. This fixes a slew of warnings.
Differential Revision: https://reviews.llvm.org/D40821
llvm-svn: 319939
Null-checking functions which aren't marked weak_import is a no-op
(the compiler rewrites the check to 'true'), regardless of whether a
library providing its definition is weak-linked. If the deployment
target is greater than the minimum requirement, the availability markup
on APIs does not lower to weak_import.
Remove no-op null checks to clean up the code and silence warnings.
Differential Revision: https://reviews.llvm.org/D40812
llvm-svn: 319936
struct iovec is used as an interface to system (posix) api's. As such,
we shouldn't be using it in os-independent code, and we shouldn't be
defining our own iovec replacements.
Fortunately, its usage was not very widespread, so the removal was very
easy -- I simply moved a couple declarations into os-specific code.
llvm-svn: 319536
In https://reviews.llvm.org/D39681, we started using a map instead
passing a long list of register sets to the ppc64le register context.
However, existing register contexts were still using the old method.
This converts the remaining register contexts to use this approach.
While doing that, I've had to modify the approach a bit:
- the general purpose register set is still kept as a separate field,
because this one is always present, and it's parsing is somewhat
different than that of other register sets.
- since the same register sets have different IDs on different operating
systems, but we use the same register context class to represent
different register sets, I've needed to add a layer of indirection to
translate os-specific constants (e.g. NETBSD::NT_AMD64_FPREGS) into more
generic terms (e.g. floating point register set).
While slightly more complicated, this setup allows for better separation
of concerns. The parsing code in ProcessElfCore can focus on parsing
OS-specific core file notes, and can completely ignore
architecture-specific register sets (by just storing any unrecognised
notes in a map). These notes will then be passed on to the
architecture-specific register context, which can just deal with
architecture specifics, because the OS-specific note types are hidden in
a register set description map.
This way, adding an register set, which is already supported on other
OSes, to a new OS, should in most cases be as simple as adding a new
entry into the register set description map.
Differential Revision: https://reviews.llvm.org/D40133
llvm-svn: 319162
Summary:
New linux kernels (on systems that support the XSAVES instruction) will
not update the inferior registers unless the corresponding flag in the
XSAVE header is set. Normally this flag will be set in our image of the
XSAVE area (since we obtained it from the kernel), but if the inferior
has never used the corresponding register set, the respective flag can
be clear.
This fixes the issue by making sure we explicitly set the flags
corresponding to the registers we modify. I don't try to precisely match
the flags to set on each write, as the rules could get quite complicated
-- I use a simpler over-approximation instead.
This was already caught by test_fp_register_write, but that was only
because the code that ran before main() did not use some of the register
sets. Since nothing in this test relies on being stopped in main(), I
modify the test to stop at the entry point instead, so we can be sure
the inferior did not have a chance to access these registers.
Reviewers: clayborg, valentinagiusti
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40434
llvm-svn: 319161
Summary:
We've had a single function responsible for splitting a core segment
into notes, and parsing the notes themselves, bearing in mind variations
between 4 supported OS types. This commit splits that code into 5
pieces:
- (os-independent) code for splitting a segment into individual notes
- per-os function for parsing the notes into thread information
Reviewers: clayborg, krytarowski, emaste, alexandreyy, kettenis
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40311
llvm-svn: 318903
so it has the same padding as the kernel's definition
which is written in terms of uint128_t. Original patch
by Ryan Mansfield.
<rdar://problem/35468499>
llvm-svn: 318357
break. The alignas(__uint128_t) is not recognized with MSVC
it looks like. Zachary, is there a similar type on windows?
I suppose I can go with alignas(16) here but I'd prefer to
specify the type alignment that I want & let the ABI dictate
how much padding is required.
llvm-svn: 318262
The rationale here is that ArchSpec is used throughout the codebase,
including in places which should not depend on the rest of the code in
the Core module.
This commit touches many files, but most of it is just renaming of
#include lines. In a couple of cases, I removed the #include ArchSpec
line altogether, as the file was not using it. In one or two places,
this necessitated adding other #includes like lldb-private-defines.h.
llvm-svn: 318048
Summary:
This commit removes the concrete_frame_idx member from
NativeRegisterContext and related functions, which was always set to
zero and never used.
I also change the native thread class to store a NativeRegisterContext
as a unique_ptr (documenting the ownership) and make sure it is always
initialized (most of the code was already blindly dereferencing the
register context pointer, assuming it would always be present -- this
makes its treatment consistent).
Reviewers: eugene, clayborg, krytarowski
Subscribers: aemerson, sdardis, nemanjai, javed.absar, arichardson, kristof.beyls, kbarton, uweigand, alexandreyy, lldb-commits
Differential Revision: https://reviews.llvm.org/D39837
llvm-svn: 317881
Summary:
These tests used to log the error message and return plain bool mainly
because at the time they we written, we did not have a nice way to
assert on llvm::Error values. That is no longer true, so replace this
pattern with a more idiomatic approach.
As a part of this patch, I also move the formatting of
GDBRemoteCommunication::PacketResult values out of the test code, as
that can be useful elsewhere.
Reviewers: zturner, eugene
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D39790
llvm-svn: 317795
Summary:
These functions used to return bool to signify whether they were able to
retrieve the data. This is redundant because the ArchSpec and ByteOrder
already have their own "invalid" states, *and* because both of the
current implementations (linux, netbsd) can always provide a valid
result.
This allows us to simplify bits of the code handling these values.
Reviewers: eugene, krytarowski
Subscribers: javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D39733
llvm-svn: 317779
Summary:
Posix core files sometime don't contain enough information to correctly
detect the OS. If that is the case we should use the OS from the target
instead as it will contain usable information in more cases and if the
target and the core contain different OS-es then we are already in a
pretty bad state so moving from an unknown OS to a known (but possibly
incorrect) OS will do no harm.
We already had similar code in place for MIPS. This change tries to make
it more generic by using ArchSpec::MergeFrom and extends it to all
architectures but some MIPS specific issue prevent us from getting rid
of special casing MIPS.
Reviewers: clayborg, nitesh.jain
Subscribers: aemerson, sdardis, arichardson, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D36046
llvm-svn: 317411
Summary:
ArchSpec::SetTriple was taking a Platform as an argument, and used it to
fill in missing pieces of the specified triple. I invert the dependency
by moving this code to other classes. For this purpose, I've created
three new functions.
- HostInfo::GetAugmentedArchSpec: fills in the triple using the host
platform (this used to be implemented by passing a null platform
pointer). By putting this code in the Host module, we can provide a
way to anyone who does not have a platform instance (lldb-server) an
easy way to get Host data.
- Platform::GetAugmentedArchSpec: if you have a platform instance, you
can call this to let it fill in the triple.
- static Platform::GetAugmentedArchSpec: implements the "if platform ==
0 then use_host() else use_platform()" part.
Reviewers: zturner, jingham, clayborg
Subscribers: mgorny, javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D39387
llvm-svn: 316987
Jason Molenda