RDA sometimes needs to visit blocks twice, to take into account
reaching defs coming in along loop back edges. Currently it handles
repeated visitation the same way as usual, which means that it will
scan through all instructions and their reg unit defs again. Not
only is this very inefficient, it also means that all reaching defs
in loops are going to be inserted twice.
We can do much better than this. The only thing we need to handle
is a new reaching def from a predecessor, which either needs to be
prepended to the reaching definitions (if there was no reaching def
from a predecessor), or needs to replace an existing predecessor
reaching def, if it is more recent. Since D77508 we only store the
most recent predecessor reaching def, so that's the only one that
may need updating.
This also has the nice side-effect that reaching definitions are
now automatically sorted and unique, so drop the llvm::sort() call
in favor of an assertion.
Differential Revision: https://reviews.llvm.org/D77511
An instruction may define the same reg unit multiple times,
avoid inserting the same reaching def multiple times in that case.
Also print the reg unit, rather than the super-register, in the
debug code.
When entering a basic block, RDA inserts reaching definitions coming
from predecessor blocks (which will be negative numbers) in a rather
peculiar way. If you have incoming reaching definitions -4, -3, -2, -1,
it will insert those. If you have incoming reaching definitions
-1, -2, -3, -4, it will insert -1, -1, -1, -1, as the max is taken
at each step. That's probably not what was intended...
However, RDA only actually cares about the most recent reaching
definition from a predecessor (to calculate clearance), so this
ends up working fine as far as behavior is concerned. It does
waste memory on unnecessary reaching definitions though.
This patch changes the implementation to first compute the most
recent reaching definition in one loop, and then insert only that
one in a separate loop.
Differential Revision: https://reviews.llvm.org/D77508
At the end of a basic block, RDA adjusts all the reaching defs it
found to be relative to the end of the basic block, rather than the
start of it. However, it also does this to registers which don't
have a reaching def, indicated by ReachingDefDefaultVal. This means
that code checking against ReachingDefDefaultVal will not skip them,
and may insert them into the reaching definition list. This is
ultimately harmless, but causes unnecessary work and is logically
not right.
Differential Revision: https://reviews.llvm.org/D77506
Use MIOperand in collectLocalKilledOperands to make the search
global, as we already have to search for global uses too. This
allows us to delete more dead code when tail predicating.
Differential Revision: https://reviews.llvm.org/D75167
In RDA, check against the already decided dead instructions when
looking at users. This allows an instruction to be removed if it
has multiple users, but they're all dead.
This means that IT instructions can be considered killed once all
the itstate using instructions are dead.
Differential Revision: https://reviews.llvm.org/D75245
Ensure that we're recording implicit defs, as well as visiting implicit
uses and implicit defs when we're walking through operands.
Differential Revision: https://reviews.llvm.org/D75185
Add getUniqueReachingMIDef to RDA which performs a global search for
a machine instruction that produces a unique definition of a given
register at a given point. Also add two helper functions
(getMIOperand) that wrap around this functionality to get the
incoming definition uses of a given instruction. These now replace
the uses of getReachingMIDef in ARMLowOverheadLoops. getReachingMIDef
has been renamed to getReachingLocalMIDef and has been made private
along with getInstFromId.
Differential Revision: https://reviews.llvm.org/D74605
Change the way that we remove the redundant iteration count code in
the presence of IT blocks. collectLocalKilledOperands has been
introduced to scan an instructions operands, collecting the killed
instructions and then visiting them too. This is used to delete the
code in the preheader which calculates the iteration count. We also
track any IT blocks within the preheader and, if we remove all the
instructions from the IT block, we also remove the IT instruction.
isSafeToRemove is used to remove any redundant uses of the iteration
count within the loop body.
Differential Revision: https://reviews.llvm.org/D74975
To find the instruction in the block for a given ID, first a count and then a
lookup was performed in the map, which is almost the same thing, thus doing
double the work.
Differential Revision: https://reviews.llvm.org/D73866
Add several new helpers to RDA:
- hasLocalDefBefore
- isRegDefinedAfter
- isSafeToDefRegAt
And move two bits of logic from ARMLowOverheadLoops into RDA:
- isSafeToMove
- isSafeToRemove
Both of these have some wrappers too to make them more convienent to
use.
Differential Revision: https://reviews.llvm.org/D73460
Introduce a method to walk through use-def chains to decide whether
it's possible to remove a given instruction and its users. These
instructions are then stored in a set until the end of the transform
when they're erased. This is now used to perform checks on the
iteration count (LoopDec chain), element count (VCTP chain) and the
possibly redundant iteration count.
As well as being able to remove chains of instructions, we know also
check that the sub feeding the vctp is producing the expected value.
Differential Revision: https://reviews.llvm.org/D71837
This is a recommit of D71330, but with a few things fixed and changed:
1) ReachingDefAnalysis: this was not running with optnone as it was checking
skipFunction(), which other analysis passes don't do. I guess this is a
copy-paste from a codegen pass.
2) VPTBlockPass: here I've added skipFunction(), because like most/all
optimisations, we don't want to run this with optnone.
This fixes the issues with the initial/previous commit: the VPTBlockPass was
running with optnone, but ReachingDefAnalysis wasn't, and so VPTBlockPass was
crashing querying ReachingDefAnalysis.
I've added test case mve-vpt-block-optnone.mir to check that we don't run
VPTBlock with optnone.
Differential Revision: https://reviews.llvm.org/D71470
1) Fix an issue with the incorrect value being used for the number of
elements being passed to [d|w]lstp. We were trying to check that
the value was available at LoopStart, but this doesn't consider
that the last instruction in the block could also define the
register. Two helpers have been added to RDA for this.
2) Insert some code to now try to move the element count def or the
insertion point so that we can perform more tail predication.
3) Related to (1), the same off-by-one could prevent us from
generating a low-overhead loop when a mov lr could have been
the last instruction in the block.
4) Fix up some instruction attributes so that not all the
low-overhead loop instructions are labelled as branches and
terminators - as this is not true for dls/dlstp.
Differential Revision: https://reviews.llvm.org/D71609
After creating a low-overhead loop, the loop update instruction was still
lingering around hurting performance. This removes dead loop update
instructions, which in our case are mostly SUBS instructions.
To support this, some helper functions were added to MachineLoopUtils and
ReachingDefAnalysis to analyse live-ins of loop exit blocks and find uses
before a particular loop instruction, respectively.
This is a first version that removes a SUBS instruction when there are no other
uses inside and outside the loop block, but there are some more interesting
cases in test/CodeGen/Thumb2/LowOverheadLoops/mve-tail-data-types.ll which
shows that there is room for improvement. For example, we can't handle this
case yet:
..
dlstp.32 lr, r2
.LBB0_1:
mov r3, r2
subs r2, #4
vldrh.u32 q2, [r1], #8
vmov q1, q0
vmla.u32 q0, q2, r0
letp lr, .LBB0_1
@ %bb.2:
vctp.32 r3
..
which is a lot more tricky because r2 is not only used by the subs, but also by
the mov to r3, which is used outside the low-overhead loop by the vctp
instruction, and that requires a bit of a different approach, and I will follow
up on this.
Differential Revision: https://reviews.llvm.org/D71007
Add some more helper functions to ReachingDefs to query the uses of
a given MachineInstr and also to query whether two MachineInstrs use
the same def of a register.
For Arm, while tail-predicating, these helpers are used in the
low-overhead loops to remove the dead code that calculates the number
of loop iterations.
Differential Revision: https://reviews.llvm.org/D70240
Add several new methods to ReachingDefAnalysis:
- getReachingMIDef, instead of returning an integer, return the
MachineInstr that produces the def.
- getInstFromId, return a MachineInstr for which the given integer
corresponds to.
- hasSameReachingDef, return whether two MachineInstr use the same
def of a register.
- isRegUsedAfter, return whether a register is used after a given
MachineInstr.
These methods have been used in ARMLowOverhead to replace searching
for uses/defs.
Differential Revision: https://reviews.llvm.org/D70009
MachineInstr.h included AliasAnalysis.h, which includes a world of IR
constructs mostly unneeded in CodeGen. Prune it. Same for
DebugInfoMetadata.h.
Noticed with -ftime-trace.
llvm-svn: 375311
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Because we create a new kind of debug instruction, DBG_LABEL, we need to
check all passes which use isDebugValue() to check MachineInstr is debug
instruction or not. When expelling debug instructions, we should expel
both DBG_VALUE and DBG_LABEL. So, I create a new function,
isDebugInstr(), in MachineInstr to check whether the MachineInstr is
debug instruction or not.
This patch has no new test case. I have run regression test and there is
no difference in regression test.
Differential Revision: https://reviews.llvm.org/D45342
Patch by Hsiangkai Wang.
llvm-svn: 331844
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: bogner, rnk, MatzeB, RKSimon
Reviewed By: rnk
Subscribers: JDevlieghere, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D45133
llvm-svn: 329435
Casey Carter