The motivating example is this
for (j = n; j > 1; j = i) {
i = j / 2;
}
The signed division is safely to be changed to an unsigned division (j is known
to be larger than 1 from the loop guard) and later turned into a single shift
without considering the sign bit.
llvm-svn: 263406
The diff is relatively large since I took a chance to rearrange the code I had to touch in a more obvious way, but the key bit is merely using the !range metadata when we can't analyze the instruction further. The previous !range metadata code was essentially just dead since no binary operator or cast will have !range metadata (per Verifier) and it was otherwise dropped on the floor.
llvm-svn: 262751
Most of this is fairly straight forward. Add handling for min/max via existing matcher utility and ConstantRange routines. Add handling for clamp by exploiting condition constraints on inputs.
Note that I'm only handling two constant ranges at this point. It would be reasonable to consider treating overdefined as a full range if the instruction is typed as an integer, but that should be a separate change.
Differential Revision: http://reviews.llvm.org/D17184
llvm-svn: 262085
The root issue appears to be a confusion around what makeNoWrapRegion actually does. It seems likely we need two versions of this function with slightly different semantics.
llvm-svn: 260981
As the title says. Modelled after similar code in SCEV.
This is useful when analysing induction variables in loops which have been canonicalized by other passes. I wrote the tests as non-loops specifically to avoid the generality introduced in http://reviews.llvm.org/D17174. While that can handle many induction variables without *needing* to exploit nsw, there's no reason not to use it if we've already proven it.
Differential Revision: http://reviews.llvm.org/D17177
llvm-svn: 260705
This patches teaches LVI to recognize clamp idioms (e.g. select(a > 5, a, 5) will always produce something greater than 5.
The tests end up being somewhat simplistic because trying to exercise the case I actually care about (a loop with a range check on a clamped secondary induction variable) ends up tripping across a couple of other imprecisions in the analysis. Ah, the joys of LVI...
Differential Revision: http://reviews.llvm.org/D16827
llvm-svn: 260627
LVI has several separate sources of facts - edge local conditions, recursive queries, assumes, and control independent value facts - which all apply to the same value at the same location. The existing implementation was very conservative about exploiting all of these facts at once.
This change introduces an "intersect" function specifically to abstract the action of picking a good set of facts from all of the separate facts given. At the moment, this function is relatively simple (i.e. mostly just reuses the bits which were already there), but even the minor additions reveal the inherent power. For example, JumpThreading is now capable of doing an inductive proof that a particular value is always positive and removing a half range check.
I'm currently only using the new intersect function in one place. If folks are happy with the direction of the work, I plan on making a series of small changes without review to replace mergeIn with intersect at all the appropriate places.
Differential Revision: http://reviews.llvm.org/D14476
llvm-svn: 259461
Teach LVI to handle select instructions in the exact same way it handles PHI nodes. This is useful since various parts of the optimizer convert PHI nodes into selects and we don't want these transformations to cause inferior optimization.
Note that this patch does nothing to exploit the implied constraint on the inputs represented by the select condition itself. That will be a later patch and is blocked on http://reviews.llvm.org/D14476
llvm-svn: 259429
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe. For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)
For out of tree owners, I was able to strip alignment from calls using sed by replacing:
(call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
$1i1 false)
and similarly for memmove and memcpy.
I then added back in alignment to test cases which needed it.
A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.
In IRBuilder itself, a new argument was added. Instead of calling:
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)
There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool. This is to prevent isVolatile here from passing its default
parameter to the source alignment.
Note, changes in future can now be made to codegen. I didn't change anything here, but this
change should enable better memcpy code sequences.
Reviewed by Hal Finkel.
llvm-svn: 253511
In my previous change to CVP (251606), I made CVP much more aggressive about trying to constant fold comparisons. This patch is a reversal in direction. Rather than being agressive about every compare, we restore the non-block local restriction for most, and then try hard for compares feeding returns.
The motivation for this is two fold:
* The more I thought about it, the less comfortable I got with the possible compile time impact of the other approach. There have been no reported issues, but after talking to a couple of folks, I've come to the conclusion the time probably isn't justified.
* It turns out we need to know the context to leverage the full power of LVI. In particular, asking about something at the end of it's block (the use of a compare in a return) will frequently get more precise results than something in the middle of a block. This is an implementation detail, but it's also hard to get around since mid-block queries have to reason about possible throwing instructions and don't get to use most of LVI's block focused infrastructure. This will become particular important when combined with http://reviews.llvm.org/D14263.
Differential Revision: http://reviews.llvm.org/D14271
llvm-svn: 252032
Somewhat shockingly for an analysis pass which is computing constant ranges, LVI did not understand the ranges provided by range metadata.
As part of this change, I included a change to CVP primarily because doing so made it much easier to write small self contained test cases. CVP was previously only handling the non-local operand case, but given that LVI can sometimes figure out information about instructions standalone, I don't see any reason to restrict this. There could possibly be a compile time impact from this, but I suspect it should be minimal. If anyone has an example which substaintially regresses, please let me know. I could restrict the block local handling to ICmps feeding Terminator instructions if needed.
Note that this patch continues a somewhat bad practice in LVI. In many cases, we know facts about values, and separate context sensitive facts about values. LVI makes no effort to distinguish and will frequently cache the same value fact repeatedly for different contexts. I would like to change this, but that's a large enough change that I want it to go in separately with clear documentation of what's changing. Other examples of this include the non-null handling, and arguments.
As a meta comment: the entire motivation of this change was being able to write smaller (aka reasonable sized) test cases for a future patch teaching LVI about select instructions.
Differential Revision: http://reviews.llvm.org/D13543
llvm-svn: 251606
Currently LazyValueInfo will report only alloca's as having nonnull range.
For loads with !nonnull metadata it will bailout with no additional information.
Same is true for calls returning nonnull pointers.
This change extends LazyValueInfo to handle additional nonnull instructions.
Differential Revision: http://reviews.llvm.org/D12932
llvm-svn: 247985
LazuValueInfo can prove that value is nonnull based on the context information.
Make use of this ability to infer nonnull attributes for the call arguments.
Differential Revision: http://reviews.llvm.org/D12836
llvm-svn: 247707
CVP wants to analyze the condition operand of a select along an edge.
It succeeds in getting back a Constant but not a ConstantInt. Instead,
it gets a ConstantExpr. It then assumes that the Constant must be equal
to false because it isn't equal to true.
Instead, perform an additional comparison.
This fixes PR23752.
llvm-svn: 239217
Summary:
If the branch that leads to the PHI node and the Select instruction
depend on correlated conditions, we might be able to directly use the
corresponding value from the Select instruction as the incoming value
for the PHI node, allowing later removal of the select instruction.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9051
llvm-svn: 237201
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
If solveBlockValue() needs results from predecessors that are not already
computed, it returns false with the intention of resuming when the dependencies
have been resolved. However, the computation would never be resumed since an
'overdefined' result had been placed in the cache, preventing any further
computation.
The point of placing the 'overdefined' result in the cache seems to have been
to break cycles, but we can check for that when inserting work items in the
BlockValue stack instead. This makes the "stop and resume" mechanism of
solveBlockValue() work as intended, unlocking more analysis.
Using this patch shaves 120 KB off a 64-bit Chromium build on Linux.
I benchmarked compiling bzip2.c at -O2 but couldn't measure any difference in
compile time.
Tests by Jiangning Liu from r215343 / PR21238, Pete Cooper, and me.
Differential Revision: http://reviews.llvm.org/D6397
llvm-svn: 222768
- Instead of setting the suffixes in a bunch of places, just set one master
list in the top-level config. We now only modify the suffix list in a few
suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py).
- Aside from removing the need for a bunch of lit.local.cfg files, this enables
4 tests that were inadvertently being skipped (one in
Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and
CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been
XFAILED).
- This commit also fixes a bunch of config files to use config.root instead of
older copy-pasted code.
llvm-svn: 188513
This update was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
llvm-svn: 186268
This is a common pattern with dyn_cast and similar constructs, when the
PHI no longer depends on the select it can often be turned into a simpler
construct or even get hoisted out of the loop.
PR15340.
llvm-svn: 175995
This could probably be made a lot smarter, but this is a common case and doesn't require LVI to scan a lot
of code. With this change CVP can optimize away the "shift == 0" case in Hashing.h that only gets hit when
"shift" is in a range not containing 0.
llvm-svn: 151919
a Constant into a ConstantRange. Handle this conservatively for now, rather than asserting. The testcase is
more complex that I would like, but the manifestation of the problem is sensitive to iteration orders and the state of the
LVI cache, and I have not been able to reproduce it with manually constructed or simplified cases.
Fixes PR8162.
llvm-svn: 114103
Haicheng Wu