This reverts commit r311038.
Several buildbots are breaking, and at least one appears to be due to
the forwarding of physical regs enabled by this change. Reverting while
I investigate further.
llvm-svn: 311062
This change extends MachineCopyPropagation to do COPY source forwarding.
This change also extends the MachineCopyPropagation pass to be able to
be run during register allocation, after physical registers have been
assigned, but before the virtual registers have been re-written, which
allows it to remove virtual register COPY LiveIntervals that become dead
through the forwarding of all of their uses.
Reviewers: qcolombet, javed.absar, MatzeB, jonpa
Subscribers: jyknight, nemanjai, llvm-commits, nhaehnle, mcrosier, mgorny
Differential Revision: https://reviews.llvm.org/D30751
llvm-svn: 311038
Add codegen for VSX word extract conversion from signed/unsigned to single/double
precision.
For UINT_TO_FP:
Extract word unsigned and convert to float was implemented in https://reviews.llvm.org/D20239.
Here we will add the missing extract integer and conversion to double. This
utilizes the new P9 instruction xxextractuw to extracting an integer element
when the result will be converted to double thereby saving 2 direct moves
(VSR <-> GPR).
For SINT_TO_FP:
We will implement the following sequence which will also reduce the number of
instructions by saving 2 direct moves.
v4i32->f32:
xxspltw
xvcvsxwsp
xscvspdpn
v4i32->f64:
xxspltw
xvcvsxwdp
Differential Revision: https://reviews.llvm.org/D35859
llvm-svn: 310866
introduce a miscompile bug.
There appears to be a bug where the generated code to extract the sign
bit doesn't work correctly for 32-bit inputs. I've replied to the
original commit pointing out the problem. I think I see by inspection
(and reading the manual for PPC) how to fix this, but I can't be 100%
confident and I also don't know what the best way to test this is.
Currently it seems nearly impossible to get the backend to hit this code
path, but the patch autohr is likely in a better position to craft such
test cases than I am, and based on where the bug is it should be easily
done.
Original commit message for r310346:
"""
[PowerPC] Eliminate compares - add i32 sext/zext handling for SETLE/SETGE
Adds handling for SETLE/SETGE comparisons on i32 values. Furthermore, it
adds the handling for the special case where RHS == 0.
Differential Revision: https://reviews.llvm.org/D34048
"""
llvm-svn: 310809
Summary:
This fixes PR32721 in IfConvertTriangle and possible similar problems in
IfConvertSimple, IfConvertDiamond and IfConvertForkedDiamond.
In PR32721 we had a triangle
EBB
| \
| |
| TBB
| /
FBB
where FBB didn't have any successors at all since it ended with an
unconditional return. Then TBB and FBB were be merged into EBB, but EBB
would still keep its successors, and the use of analyzeBranch and
CorrectExtraCFGEdges wouldn't help to remove them since the return
instruction is not analyzable (at least not on ARM).
The edge updating code and branch probability updating code is now pushed
into MergeBlocks() which allows us to share the same update logic between
more callsites. This lets us remove several dependencies on analyzeBranch
and completely eliminate RemoveExtraEdges.
One thing that showed up with this patch was that IfConversion sometimes
left a successor with 0% probability even if there was no branch or
fallthrough to the successor.
One such example from the test case ifcvt_bad_zero_prob_succ.mir. The
indirect branch tBRIND can only jump to bb.1, but without the patch we
got:
bb.0:
successors: %bb.1(0x80000000)
bb.1:
successors: %bb.1(0x80000000), %bb.2(0x00000000)
tBRIND %r1, 1, %cpsr
B %bb.1
bb.2:
There is no way to jump from bb.1 to bb2, but still there is a 0% edge
from bb.1 to bb.2.
With the patch applied we instead get the expected:
bb.0:
successors: %bb.1(0x80000000)
bb.1:
successors: %bb.1(0x80000000)
tBRIND %r1, 1, %cpsr
B %bb.1
Since bb.2 had no predecessor at all, it was removed.
Several testcases had to be updated due to this since the removed
successor made the "Branch Probability Basic Block Placement" pass
sometimes place blocks in a different order.
Finally added a couple of new test cases:
* PR32721_ifcvt_triangle_unanalyzable.mir:
Regression test for the original problem dexcribed in PR 32721.
* ifcvt_triangleWoCvtToNextEdge.mir:
Regression test for problem that caused a revert of my first attempt
to solve PR 32721.
* ifcvt_simple_bad_zero_prob_succ.mir:
Test case showing the problem where a wrong successor with 0% probability
was previously left.
* ifcvt_[diamond|forked_diamond|simple]_unanalyzable.mir
Very simple test cases for the simple and (forked) diamond cases
involving unanalyzable branches that can be nice to have as a base if
wanting to write more complicated tests.
Reviewers: iteratee, MatzeB, grosser, kparzysz
Reviewed By: kparzysz
Subscribers: kbarton, davide, aemerson, nemanjai, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D34099
llvm-svn: 310697
We've implemented a 1-byte splat using XXSPLTISB on P9. However, LLVM will
produce a 1-byte splat even for wider element BUILD_VECTOR nodes. This patch
prevents crashing in that situation.
Differential Revision: https://reviews.llvm.org/D35650
llvm-svn: 310358
Adds handling for SETLE/SETGE comparisons on i32 values. Furthermore, it adds
the handling for the special case where RHS == 0.
Differential Revision: https://reviews.llvm.org/D34048
llvm-svn: 310346
Power 9 has instructions to do absolute difference (VABSDUB, VABSDUH, VABSDUW)
for byte, halfword and word. We should take advantage of these.
Differential Revision: https://reviews.llvm.org/D34684
llvm-svn: 309876
`llc -march` is problematic because it only switches the target
architecture, but leaves the operating system unchanged. This
occasionally leads to indeterministic tests because the OS from
LLVM_DEFAULT_TARGET_TRIPLE is used.
However we can simply always use `llc -mtriple` instead. This changes
all the tests to do this to avoid people using -march when they copy and
paste parts of tests.
This patch:
- Removes -march if the .ll file already has a matching `target triple`
directive or -mtriple argument.
- In all other cases changes -march=ppc32/-march=ppc64 to
-mtriple=ppc32--/-mtriple=ppc64--
See also the discussion in https://reviews.llvm.org/D35287
llvm-svn: 309754
As noted in the code comment, transforming this in the other direction might require
a separate transform here in CGP given the block-at-a-time DAG constraint.
Besides that theoretical motivation, there are 2 practical motivations for the
subtract-of-cmps form:
1. The codegen for both x86 and PPC is better for this IR (though PPC could be better still).
There is discussion about canonicalizing IR to the select form
( http://lists.llvm.org/pipermail/llvm-dev/2017-July/114885.html ),
so we probably need to add DAG transforms for those patterns anyway, but this improves the
memcmp output without waiting for that step.
2. If we allow vector-sized chunks for the load and compare, x86 is better prepared to convert
that to optimal code when using subtract-of-cmps, so another prerequisite patch is avoided
if we choose to enable that.
Differential Revision: https://reviews.llvm.org/D34904
llvm-svn: 309597
In optimizeCompareInstr, a compare instruction is eliminated by using a record form instruction if possible.
If the branch instruction that uses the result of the compare has a static branch hint, the optimization does not happen.
This patch makes this optimization happen regardless of the branch hint by splitting branch hint and branch condition before checking the predicate to identify the possible optimizations.
Differential Revision: https://reviews.llvm.org/D35801
llvm-svn: 309255
This patch just adds printing of CR bit registers in a more human-readable
form akin to that used by the GNU binutils.
Differential Revision: https://reviews.llvm.org/D31494
llvm-svn: 309001
As outlined in the PR, we didn't ensure that displacements for DQ-Form
instructions are multiples of 16. Since the instruction encoding encodes
a quad-word displacement, a sub-16 byte displacement is meaningless and
ends up being encoded incorrectly.
Fixes https://bugs.llvm.org/show_bug.cgi?id=33671.
Differential Revision: https://reviews.llvm.org/D35007
llvm-svn: 307934
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
llvm-svn: 307722
1. The available program storage region of the red zone to compilers is 288
bytes rather than 244 bytes.
2. The formula for negative number alignment calculation should be
y = x & ~(n-1) rather than y = (x + (n-1)) & ~(n-1).
Differential Revision: https://reviews.llvm.org/D34337
llvm-svn: 307672
For this example:
float test (int *arr) {
return arr[2];
}
We currently generate the following code:
li r4, 8
lxsiwax f0, r3, r4
xscvsxdsp f1, f0
With this patch, we will now generate:
addi r3, r3, 8
lxsiwax f0, 0, r3
xscvsxdsp f1, f0
Originally reported in: https://bugs.llvm.org/show_bug.cgi?id=27204
Differential Revision: https://reviews.llvm.org/D35027
llvm-svn: 307553
This patch adds the exploitation for new power 9 instructions which extract
variable elements from vectors:
VEXTUBLX
VEXTUBRX
VEXTUHLX
VEXTUHRX
VEXTUWLX
VEXTUWRX
Differential Revision: https://reviews.llvm.org/D34032
Commit on behalf of Zaara Syeda (syzaara@ca.ibm.com)
llvm-svn: 307174
This patch adds on to the exploitation added by https://reviews.llvm.org/D33510.
This now catches build vector nodes where the inputs are coming from sign
extended vector extract elements where the indices used by the vector extract
are not correct. We can still use the new hardware instructions by adding a
shuffle to move the elements to the correct indices. I introduced a new PPCISD
node here because adding a vector_shuffle and changing the elements of the
vector_extracts was getting undone by another DAG combine.
Commit on behalf of Zaara Syeda (syzaara@ca.ibm.com)
Differential Revision: https://reviews.llvm.org/D34009
llvm-svn: 307169
The existing check lines were more flexible, but these are
small enough tests that there shouldn't be much question
about register allocation. I've been hand-modifying this
file as I change the CGP memcmp expansion, but that's
more error-prone and time-consuming than just running the
update script.
llvm-svn: 306861
This patch fixes a verification error with -verify-machineinstrs while expanding __tls_get_addr by not creating ADJCALLSTACKUP and ADJCALLSTACKDOWN if there is another ADJCALLSTACKUP in this basic block since nesting ADJCALLSTACKUP/ADJCALLSTACKDOWN is not allowed.
Here, ADJCALLSTACKUP and ADJCALLSTACKDOWN are created as a fence for instruction scheduling to avoid _tls_get_addr is scheduled before mflr in the prologue (https://bugs.llvm.org//show_bug.cgi?id=25839). So if another ADJCALLSTACKUP exists before _tls_get_addr, we do not need to create a new ADJCALLSTACKUP.
Differential Revision: https://reviews.llvm.org/D34347
llvm-svn: 306678
As noted in D34071, there are some IR optimization opportunities that could be
handled by normal IR passes if this expansion wasn't happening so late in CGP.
Regardless of that, it seems wasteful to knowingly produce suboptimal IR here,
so I'm proposing this change:
%s = sub i32 %x, %y
%r = icmp ne %s, 0
=>
%r = icmp ne %x, %y
Changing the predicate to 'eq' mimics what InstCombine would do, so that's just
an efficiency improvement if we decide this expansion should happen sooner.
The fact that the PowerPC backend doesn't eliminate the 'subf.' might be
something for PPC folks to investigate separately.
Differential Revision: https://reviews.llvm.org/D34416
llvm-svn: 306471
When SelectionDAG merges consecutive stores and loads in MergeConsecutiveStores, it does not set dereferenceable flag for a created load instruction. This results in an assertion failure if SelectionDAG commonizes this load instruction with other load instructions, as well as it may miss optimization opportunities.
This patch sat dereferenceable flag for the newly created load instruction if all the load instructions to be merged are dereferenceable.
Differential Revision: https://reviews.llvm.org/D34679
llvm-svn: 306404
PowerPC backend does not pass the current optimization level to SelectionDAGISel and so SelectionDAGISel works with the default optimization level regardless of the current optimization level.
This patch makes the PowerPC backend set the optimization level correctly.
Differential Revision: https://reviews.llvm.org/D34615
llvm-svn: 306367
When SelectionDAG expands memcpy (or memmove) call into a sequence of load and store instructions, it disregards dereferenceable flag even the source pointer is known to be dereferenceable.
This results in an assertion failure if SelectionDAG commonizes a load instruction generated for memcpy with another load instruction for the source pointer.
This patch makes SelectionDAG to set the dereferenceable flag for the load instructions properly to avoid the assertion failure.
Differential Revision: https://reviews.llvm.org/D34467
llvm-svn: 306209
Define target hook isReallyTriviallyReMaterializable() to explicitly specify
PowerPC instructions that are trivially rematerializable. This will allow
the MachineLICM pass to accurately identify PPC instructions that should always
be hoisted.
Differential Revision: https://reviews.llvm.org/D34255
llvm-svn: 305932
This does some improvements/cleanup to the recently introduced
scavengeRegisterBackwards() functionality:
- Rewrite findSurvivorBackwards algorithm to use the existing
LiveRegUnit::accumulateBackward() code. This also avoids the Available
and Candidates bitset and just need 1 LiveRegUnit instance
(= 1 bitset).
- Pick registers in allocation order instead of register number order.
llvm-svn: 305817
This is the last step needed to avoid regressions for x86 before we flip the switch to allow
expansion of the smallest set of memcpy() via CGP. The DAG version checks for constant strings,
so we need to do that here too.
FWIW, the 2 constant test is not handled by LibCallSimplifier::optimizeMemCmp() because that
code is limited to 8-bit constant arrays. LibCallSimplifier will also fail to optimize some 1
constant tests because its alignment requirements are too strict (shouldn't require alignment
for a constant operand).
Differential Revision: https://reviews.llvm.org/D34071
llvm-svn: 305734
Re-apply r276044/r279124/r305516. Fixed a problem where we would refuse
to place spills as the very first instruciton of a basic block and thus
artifically increase pressure (test in
test/CodeGen/PowerPC/scavenging.mir:spill_at_begin)
This is a variant of scavengeRegister() that works for
enterBasicBlockEnd()/backward(). The benefit of the backward mode is
that it is not affected by incomplete kill flags.
This patch also changes
PrologEpilogInserter::doScavengeFrameVirtualRegs() to use the register
scavenger in backwards mode.
Differential Revision: http://reviews.llvm.org/D21885
llvm-svn: 305625
Revert because of reports of some PPC input starting to spill when it
was predicted that it wouldn't and no spillslot was reserved.
This reverts commit r305516.
llvm-svn: 305566
Re-apply r276044/r279124. Trying to reproduce or disprove the ppc64
problems reported in the stage2 build last time, which I cannot
reproduce right now.
This is a variant of scavengeRegister() that works for
enterBasicBlockEnd()/backward(). The benefit of the backward mode is
that it is not affected by incomplete kill flags.
This patch also changes
PrologEpilogInserter::doScavengeFrameVirtualRegs() to use the register
scavenger in backwards mode.
Differential Revision: http://reviews.llvm.org/D21885
llvm-svn: 305516
Add condition for MachineLICM to safely hoist instructions that utilize
non constant registers that are reserved.
On PPC, global variable access is done through the table of contents (TOC)
which is always in register X2. The ABI reserves this register in any
functions that have calls or access global variables.
A call through a function pointer involves saving, changing and restoring
this register around the call and thus MachineLICM does not consider it to
be invariant. We can however guarantee the register is preserved across the
call and thus is invariant.
Differential Revision: https://reviews.llvm.org/D33562
llvm-svn: 305490
This patch fixes a potential verification error (64-bit register operands for cmpw) with -verify-machineinstrs.
Differential Revision: https://reviews.llvm.org/D34208
llvm-svn: 305479
Power9 has instructions that will reverse the bytes within an element for all
sizes (half-word, word, double-word and quad-word). These can be used for the
vec_revb builtins in altivec.h. However, we implement these to match vector
shuffle nodes as that will cover both the builtins and vector shuffles that
occur in the SDAG through other means.
Differential Revision: https://reviews.llvm.org/D33690
llvm-svn: 305214
Note that if we need the result of both the divide and the modulo then we
compute the modulo based on the result of the divide and not using the new
hardware instruction.
Commit on behalf of STEFAN PINTILIE.
Differential Revision: https://reviews.llvm.org/D33940
llvm-svn: 305210
In PPCBoolRetToInt bool value is changed to i32 type. On ppc64 it may introduce an extra zero extension for the return value. This patch changes the integer type to i64 to avoid the zero extension on ppc64.
This patch fixed PR32442.
Differential Revision: https://reviews.llvm.org/D31407
llvm-svn: 305001
In SDAG, we don't expand libcalls with a nobuiltin attribute.
It's not clear if that's correct from the existing code comment:
"Don't do the check if marked as nobuiltin for some reason."
...adding a test here either way to show that there is currently
a different behavior implemented in the CGP-based expansion.
llvm-svn: 304991
The test diff for PowerPC shows we can better optimize if this case is one block.
For x86, there's would be a substantial difference if CGP expansion was enabled because branches are assumed
cheap and SDAG can't optimize across blocks.
Instead of this:
_cmp_eq8:
movq (%rdi), %rax
cmpq (%rsi), %rax
je LBB23_1
## BB#2: ## %res_block
movl $1, %ecx
jmp LBB23_3
LBB23_1:
xorl %ecx, %ecx
LBB23_3: ## %endblock
xorl %eax, %eax
testl %ecx, %ecx
sete %al
retq
We get this:
cmp_eq8:
movq (%rdi), %rcx
xorl %eax, %eax
cmpq (%rsi), %rcx
sete %al
retq
And that matches the optimal codegen that we get from the current expansion in SelectionDAGBuilder::visitMemCmpCall().
If this looks right, then I just need to confirm that vector-sized expansion will work from here, and we can enable
CGP memcmp() expansion for x86. Ie, we'll bypass the power-of-2 special cases currently optimized in SDAG because we
can lower the IR produced here optimally.
Differential Revision: https://reviews.llvm.org/D34005
llvm-svn: 304987
This could be viewed as another shortcoming of the DAGCombiner:
when both operands of a compare are zexted from the same source
type, we should be able to compare the original types.
The effect on PowerPC perf is likely unnoticeable, but there's a
visible regression for x86 if we feed the suboptimal IR for memcmp
expansion to the DAG:
_cmp_eq4_zexted_to_i64:
movl (%rdi), %ecx
movl (%rsi), %edx
xorl %eax, %eax
cmpq %rdx, %rcx
sete %al
_cmp_eq4_better:
movl (%rdi), %ecx
xorl %eax, %eax
cmpl (%rsi), %ecx
sete %al
llvm-svn: 304923
I'd like to enable CGP memcmp expansion for x86, but the output from CGP would regress the
special cases (memcmp(x,y,N) != 0 for N=1,2,4,8,16,32 bytes) that we already handle.
I'm not sure if we'll actually be able to produce the optimal code given the block-at-a-time
limitation in the DAG. We might have to just avoid those special-cases here in CGP. But
regardless of that, I think this is a win for the more general cases.
http://rise4fun.com/Alive/cbQ
Differential Revision: https://reviews.llvm.org/D33963
llvm-svn: 304849
3 of the tests were testing exactly the same thing: memcmp(x, y, 16) != 0.
I changed that to test 4, 7, and 16 bytes, so we can see how those differ.
llvm-svn: 304838
This pass allows to run the register scavenging independently of
PrologEpilogInserter to allow targeted testing.
Also adds some basic register scavenging tests.
llvm-svn: 304606
Fixes PPCTTIImpl::getCacheLineSize() returning the wrong cache line size for
newer ppc processors.
Commiting on behalf of Stefan Pintilie.
Differential Revision: https://reviews.llvm.org/D33656
llvm-svn: 304317
This patch does an inline expansion of memcmp.
It changes the memcmp library call into an inline expansion when the size is
known at compile time and is under a target specified threshold.
This expansion is implemented in CodeGenPrepare and expands into straight line
code. The target specifies a maximum load size and the expansion works by using
this size to load the two sources, compare, and exit early if a difference is
found. It also has a special case when the memcmp result is used in a compare
to zero equality.
Differential Revision: https://reviews.llvm.org/D28637
llvm-svn: 304313
There are some VectorShuffle Nodes in SDAG which can be selected to XXPERMDI
Instruction, this patch recognizes them and does the selection to improve
the PPC performance.
Differential Revision: https://reviews.llvm.org/D33404
llvm-svn: 304298
This patch builds upon https://reviews.llvm.org/rL302810 to add
handling for bitwise logical operations in general purpose registers.
The idea is to keep the values in GPRs as long as possible - only
extracting them to a condition register bit when no further operations
are to be done.
Differential Revision: https://reviews.llvm.org/D31851
llvm-svn: 304282
Summary:
AntiDepBreaker intends to add all live-outs, including the implicit
CSRs, in StartBlock. r299124 was done without understanding that
intention.
Now with the live-ins propagated correctly (D32464), we can revert this change.
Reviewers: MatzeB, qcolombet
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D33697
llvm-svn: 304251
Re-commit r303938 and r303954 with a fix for addLiveIns(): the internal
addPristines() function must be called on an empty set or it may
accidentally reset saved registers.
- addLiveOutsNoPristines() needs to add callee saved registers that are
actually saved and restored somewhere to the set (they are not
pristine).
- Cleanup/rewrite the code for addLiveOuts()/addLiveOutsNoPristines().
This fixes the problem from D32156.
Differential Revision: https://reviews.llvm.org/D32464
llvm-svn: 304001
I forgot to forward the chain, causing some missing instruction
dependencies. The test crashes the compiler without this patch.
Inspired by the test case, D33519 also tries to remove the extra sync.
Differential Revision: https://reviews.llvm.org/D33573
llvm-svn: 303931
There are some VectorShuffle Nodes in SDAG which can be selected to XXSLDWI
instruction, this patch recognizes them and does the selection to improve the
PPC performance.
llvm-svn: 303822
PPC backend eliminates compare instructions by using record-form instructions in PPCInstrInfo::optimizeCompareInstr, which is called from peephole optimization pass.
This patch improves this optimization to eliminate more compare instructions in two types of common case.
- comparison against a constant 1 or -1
The record-form instructions set CR bit based on signed comparison against 0. So, the current implementation does not exploit the record-form instruction for comparison against a non-zero constant.
This patch enables record-form optimization for constant of 1 or -1 if possible; it changes the condition "greater than -1" into "greater than or equal to 0" and "less than 1" into "less than or equal to 0".
With this patch, compare can be eliminated in the following code sequence, as an example.
uint64_t a, b;
if ((a | b) & 0x8000000000000000ull) { ... }
else { ... }
- andi for 32-bit comparison on PPC64
Since record-form instructions execute 64-bit signed comparison and so we have limitation in eliminating 32-bit comparison, i.e. with cmplwi, using the record-form. The original implementation already has such checks but andi. is not recognized as an instruction which executes implicit zero extension and hence safe to convert into record-form if used for equality check.
%1 = and i32 %a, 10
%2 = icmp ne i32 %1, 0
br i1 %2, label %foo, label %bar
In this simple example, LLVM generates andi. + cmplwi + beq on PPC64.
This patch make it possible to eliminate the cmplwi for this case.
I added andi. for optimization targets if it is safe to do so.
Differential Revision: https://reviews.llvm.org/D30081
llvm-svn: 303500
When legalizing vector operations on vNi128, they will be split to v1i128
because that is a legal type on ppc64, but then the compiler will crash in
selection dag because it fails to select for these operations. This patch fixes
shift operations. Logical shift right and left shift can be performed in the
vector unit, but algebraic shift right requires being split.
Differential Revision: https://reviews.llvm.org/D32774
llvm-svn: 303307
The variables MinGPR/MinG8R were not updated properly when resetting the
offsets, which in the included testcase lead to saving the CR register
in the same location as R30.
This fixes another issue reported in PR26519.
Differential Revision: https://reviews.llvm.org/D33017
llvm-svn: 303257
Summary:
This fixes pr32392.
The lowering pipeline is:
llvm.ppc.cfence in IR -> PPC::CFENCE8 in isel -> Actual instructions in
expandPostRAPseudo.
The reason why expandPostRAPseudo is chosen is because previous passes
are likely eliminating instructions like cmpw 3, 3 (early CSE) and bne-
7, .+4 (some branch pass(s)).
Differential Revision: https://reviews.llvm.org/D32763
llvm-svn: 303205
Summary:
In SelectionDAG, when a store is immediately chained to another store
to the same address, elide the first store as it has no observable
effects. This is causes small improvements dealing with intrinsics
lowered to stores.
Test notes:
* Many testcases overwrite store addresses multiple times and needed
minor changes, mainly making stores volatile to prevent the
optimization from optimizing the test away.
* Many X86 test cases optimized out instructions associated with
associated with va_start.
* Note that test_splat in CodeGen/AArch64/misched-stp.ll no longer has
dependencies to check and can probably be removed and potentially
replaced with another test.
Reviewers: rnk, john.brawn
Subscribers: aemerson, rengolin, qcolombet, jyknight, nemanjai, nhaehnle, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33206
llvm-svn: 303198
At O3 we are more willing to increase size if we believe it will improve
performance. The current threshold for tail-duplication of 2 instructions is
conservative, and can be relaxed at O3.
Benchmark results:
llvm test-suite:
6% improvement in aha, due to duplication of loop latch
3% improvement in hexxagon
2% slowdown in lpbench. Seems related, but couldn't completely diagnose.
Internal google benchmark:
Produces 4% improvement on internal google protocol buffer serialization
benchmarks.
Differential-Revision: https://reviews.llvm.org/D32324
llvm-svn: 303084
According to Power ISA V3.0 document, the first source operand of mtvsrdd is constant 0 if r0 is specified. So the corresponding register constraint should be g8rc_nox0.
This bug caused wrong output generated by 401.bzip2 when -mcpu=power9 and fdo are specified.
Differential Revision: https://reviews.llvm.org/D32880
llvm-svn: 302834
This patch is the first in a series of patches to provide code gen for
doing compares in GPRs when the compare result is required in a GPR.
It adds the infrastructure to select GPR sequences for i1->i32 and i1->i64
extensions. This first patch handles equality comparison on i32 operands with
the result sign or zero extended.
Differential Revision: https://reviews.llvm.org/D31847
llvm-svn: 302810
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
llvm-svn: 302527
This happened on the PPC32/SVR4 path and was discovered when building
FreeBSD on PPC32. It was a typo-class error in the frame lowering code.
This fixes PR26519.
llvm-svn: 302183
Summary:
This is the corresponding llvm change to D28037 to ensure no performance
regression.
Reviewers: bogner, kbarton, hfinkel, iteratee, echristo
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28329
llvm-svn: 301990
Fixes PR30730.
This is a re-commit of a pulled commit. The commit was pulled because some
software projects contained uses of Altivec vectors that violated alignment
requirements. Known issues have now been fixed.
Committing on behalf of Lei Huang.
Differential Revision: https://reviews.llvm.org/D26861
llvm-svn: 301892
Summary:
In some cases LLVM (especially the SLP vectorizer) will create vectors
that are 256 bytes (or larger). Given that this is intentional[0] is
likely to get more common, this patch updates the StackMap binary
format to deal with the spill locations for said vectors.
This change also bumps the stack map version from 2 to 3.
[0]: https://reviews.llvm.org/D32533#738350
Reviewers: reames, kavon, skatkov, javed.absar
Subscribers: mcrosier, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D32629
llvm-svn: 301615
When functions are terminated by unreachable instructions, the last
instruction might trigger a CFI instruction to be generated. However,
emitting it would be be illegal since the function (and thus the FDE
the CFI is in) has already ended with the previous instruction.
Darwin's dwarfdump --verify --eh-frame complains about this and the
specification supports this.
Relevant bits from the DWARF 5 standard (6.4 Call Frame Information):
"[The] address_range [field in an FDE]: The number of bytes of
program instructions described by this entry."
"Row creation instructions: [...]
The new location value is always greater than the current one."
The first quotation implies that a CFI cannot describe a target
address outside of the enclosing FDE's range.
rdar://problem/26244988
Differential Revision: https://reviews.llvm.org/D32246
llvm-svn: 301219
This allows forming more 'not' ops, so we get improvements for ISAs that have and-not.
Follow-up to:
https://reviews.llvm.org/rL300725
llvm-svn: 300763
Check the legality of ISD::[US]MULO to see whether
Intrinsic::[us]mul_with_overflow will legalize into a function call (and, thus,
will use the CTR register). Fixes PR32485.
Patch by Tim Neumann!
Differential Revision: https://reviews.llvm.org/D31790
llvm-svn: 299910
The new codepath has been in the tree for years, and there isn't any
reason to use two codepaths here.
Differential Revision: https://reviews.llvm.org/D30596
llvm-svn: 299723
This is a generic combine enabled via target hook to reduce icmp logic as discussed in:
https://bugs.llvm.org/show_bug.cgi?id=32401
It's likely that other targets will want to enable this hook for scalar transforms,
and there are probably other patterns that can use bitwise logic to reduce comparisons.
Note that we are missing an IR canonicalization for these patterns, and we will probably
prefer the pair-of-compares form in IR (shorter, more likely to fold).
Differential Revision: https://reviews.llvm.org/D31483
llvm-svn: 299542
The code already allowed vector types in via "isInteger" (which might want
a more specific name), so use splat-friendly constant predicates to match
those types.
llvm-svn: 299304
(and (setlt X, 0), (setlt Y, 0)) --> (setlt (and X, Y), 0)
We have 7 similar folds, but this one got away. The fact that the
x86 test with a branch didn't change is probably a separate bug. We
may also be missing this and the related folds in instcombine.
llvm-svn: 299252
These are the same tests added for x86 with r299238,
but PPC doesn't specify all branches as cheap, so we
see different patterns in tests with branches.
llvm-svn: 299244
Now alternatively to the TargetOption.AllowFPOpFusion global flag, FMUL->FADD
can also use the per operation FMF to allow fusion.
The idea here is not to port everything to the new scheme (e.g. fused
multiply-and-sub will be ported later) but that this work all the way from
clang.
The transformation is conditionalized on *both* the FADD and the FMUL having
the FMF contract flag.
Differential Revision: https://reviews.llvm.org/D31169
llvm-svn: 299096
Geoff Berry