Summary: Currently you can't install libc++ from within the LLVM tree without installing all of LLVM. This patch adds an install rule for libc++.
Reviewers: mclow.lists, danalbert, jroelofs, EricWF
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D11697
llvm-svn: 245470
Since r244955, we try to use the short-form ErrorInfo when both
tries failed, and the long-form match failed on a suffix operand.
However, this means we sometimes mix ErrorInfo and MatchResult
(one manifestation of this being PR24498). Instead, restore both.
llvm-svn: 245469
Because <atomic> can now be used in C++03 there is no need for the test_atomic.h header.
This commit removes the header and converts all usages to use <atomic> instead.
llvm-svn: 245468
Summary: We are going to remove the former soon.
Reviewers: EricWF
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D12117
llvm-svn: 245467
Rewrite some code to not use a lambda function. The non-lambda code is just
about as clean as the original, and not any longer. The lambda function causes
an internal compiler error in GCC 4.8.0, and it is not worth breaking support
for that compiler over this. NFC.
llvm-svn: 245466
Summary:
After putting this question up on cfe-dev I have decided that it would be best to allow the use of `<atomic>` in C++03. Although static initialization is a concern the syntax required to get it is C++11 only. Meaning that C++11 constant static initialization cannot silently break in C++03, it will always cause a syntax error. Furthermore `ATOMIC_VAR_INIT` and `ATOMIC_FLAG_INIT` remain defined in C++03 even though they cannot be used because C++03 usages will cause better error messages.
The main change in this patch is to replace `__has_feature(cxx_atomic)`, which only returns true when C++ >= 11, to `__has_extension(c_atomic)` which returns true whenever clang supports the required atomic builtins.
This patch adds the following macros:
* `_LIBCPP_HAS_C_ATOMIC_IMP` - Defined on clang versions which provide the C `_Atomic` keyword.
* `_LIBCPP_HAS_GCC_ATOMIC_IMP` - Defined on GCC > 4.7. We must use the fallback atomic implementation.
* `_LIBCPP_HAS_NO_ATOMIC_HEADER` - Defined when it is not safe to include `<atomic>`.
`_LIBCPP_HAS_C_ATOMIC_IMP` and `_LIBCPP_HAS_GCC_ATOMIC_IMP` are mutually exclusive, only one should be defined. If neither is defined then `<atomic>` is not implemented and including `<atomic>` will issue an error.
Reviewers: chandlerc, jroelofs, mclow.lists
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D11555
llvm-svn: 245463
Summary:
Currently you can't install libc++abi from within the LLVM tree without installing all of LLVM. This patch adds an install rule for libc++abi.
Reviewers: danalbert, compnerd, rengolin, beanz
Subscribers: martell, beanz, jroelofs, cfe-commits
Differential Revision: http://reviews.llvm.org/D11682
llvm-svn: 245461
Fix LoopConvertCheck bug: StringRef to temporaries.
Also add LLVM_ATTRIBUTE_UNUSED to ModernizeModuleAnchorDestination.
http://reviews.llvm.org/D12157
Patch by Angel Garcia!
llvm-svn: 245458
This patch updates the X86 lowering so that the Exception Pointer and Selector
are 64-bit wide only if Subtarget.isTarget64BitLP64.
Patch by João Porto
Reviewers: dschuff, rnk
Differential Revision: http://reviews.llvm.org/D12111
llvm-svn: 245454
To make alias scope metadata generation work in OpenMP mode we now provide
the ScopAnnotator with information about the base pointer rewrite that happens
when passing arrays into the OpenMP subfunction.
llvm-svn: 245451
the test was failing on android because processing 30 signals involved a lot of round-trips,
which was not possible in the 0.5s default timeout. After the increase the test seems to pass
reliably.
llvm-svn: 245448
doing assembly-only, and unify the Driver's PIC argument parsing.
On a few architectures, parsing of assembly files annoyingly depends
on whether PIC is enabled or not. This was handled for external 'as'
already (passing -KPIC), but was missed for calls to the standalone
internal assembler.
The integrated-as.s test needed to be modified to not expect
-fsanitize=address to be unused, as now fsanitize *IS* used for
assembly, since -fsanitize=memory can sometimes imply -fPIE, which the
assembler needs to know (gack!!).
Differential Revision: http://reviews.llvm.org/D11845
llvm-svn: 245447
"generic" cpu was wrongly handled as exact real CPU name of ARMv8.1A architecture.
This has been fixed, now it is abstract name, suitable for any arch.
Reviewers: rengolin
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D11640
llvm-svn: 245445
Reapply r243486.
- Teaches the ValueTracker in the PeepholeOptimizer to look through PHI
instructions.
- Add findNextSourceAndRewritePHI method to lookup into multiple sources
returnted by the ValueTracker and rewrite PHIs with new sources.
With these changes we can find more register sources and rewrite more
copies to allow coaslescing of bitcast instructions. Hence, we eliminate
unnecessary VR64 <-> GR64 copies in x86, but it could be extended to
other archs by marking "isBitcast" on target specific instructions. The
x86 example follows:
A:
psllq %mm1, %mm0
movd %mm0, %r9
jmp C
B:
por %mm1, %mm0
movd %mm0, %r9
jmp C
C:
movd %r9, %mm0
pshufw $238, %mm0, %mm0
Becomes:
A:
psllq %mm1, %mm0
jmp C
B:
por %mm1, %mm0
jmp C
C:
pshufw $238, %mm0, %mm0
Differential Revision: http://reviews.llvm.org/D11197
rdar://problem/20404526
llvm-svn: 245442
Summary:
The mid-end was generating vector smin/smax/umin/umax nodes, but
we were using vbsl to generatate the code. This adds the vmin/vmax
patterns and a test to check that we are now generating vmin/vmax
instructions.
Reviewers: rengolin, jmolloy
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D12105
llvm-svn: 245439
Summary:
Due to fork()/execve(), the launched inferior inherits the signal mask of its parent (lldb-server). But because lldb-server modifies its signal mask (It blocks SIGCHLD, for example), the inferior starts with some signals being initially blocked.
One consequence is that TestCallThatRestarts.ExprCommandThatRestartsTestCase (test/expression_command/call-restarts) fails because sigchld_handler() in lotta-signals.c is not called, due to the SIGCHLD signal being blocked.
To prevent the signal masking done by lldb-server from affecting the created inferior, the signal mask of the inferior is now cleared before the execve().
Patch by: Yacine Belkadi
Reviewers: ovyalov, labath
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12138
llvm-svn: 245436
There are some cases where the mul sequence is smaller, but for the most part,
using a div is preferable. This does not apply to vectors, since x86 doesn't
have vector idiv, and a vector mul/shifts sequence ought to be smaller than a
scalarized division.
Differential Revision: http://reviews.llvm.org/D12082
llvm-svn: 245431
This removes the isPow2SDivCheap() query, as it is not currently used in
any meaningful way. isIntDivCheap() no longer relies on a state variable
(as all in-tree target set it to false), but the interface allows querying
based on the type optimization level.
NFC.
Differential Revision: http://reviews.llvm.org/D12082
llvm-svn: 245430
This check will try to enforce coding guidelines on the identifiers naming.
It supports lower_case, UPPER_CASE, camelBack and CamelCase casing and
tries to convert from one to another if a mismatch is detected.
It also supports a fixed prefix and suffix that will be prepended or appended
to the identifiers, regardless of the casing.
Many configuration options are available, in order to be able to create
different rules for different kind of identifier. In general, the
rules are falling back to a more generic rule if the specific case is not
configured.
http://reviews.llvm.org/D10933
Patch by Beren Minor!
llvm-svn: 245429
Polly uses 'prevectorization' to enable outer loop vectorization. When
vectorizing an outer loop, we strip-mine <number-of-prevec-dims> loop
iterations which are than interchanged to the innermost level such that LLVM's
inner loop vectorizer (or Polly's simple vectorizer) can easily vectorize this
loop. The number of loop iterations to strip-mine is now configurable with the
option -polly-prevect-width=<number-of-prevec-dims>.
This is mostly a debugging option. We should probably add a heuristic that
derives the number of prevectorization dimensions from the target data and
the data types used.
llvm-svn: 245424
Douglas Katzman