Commit Graph

1699 Commits

Author SHA1 Message Date
Wolfgang Pieb 458b4e7c46 Reapply r294356 ("Keep track of spilled variables in LiveDebugValues").
Was reverted with r294447 due to undefined behavior with negative offsets
in DBG_VALUE instructions.

llvm-svn: 294532
2017-02-08 23:46:59 +00:00
NAKAMURA Takumi a3bc043caa Revert r294356, "DebugInfo: Track spilled variables in LiveDebugValues"
It caused undefined behavior in VarLoc. As far as I investigated,

  - VarLoc::VarLoc() treats negative offset value as InvalidKind.
    Consider the case that (int64_t)MI.getOperand(1).getImm() is negative and whether it satisfies ((uint64_t)Offset < (1ULL << 32)).

  - Comparison operators in VarLoc behave undefined since VarLoc::Loc.Hash is uninitialized in case of InvalidKind.

I guess Offset (in VarLoc) could be made aware of signed, but I am not sure.
So I have reverted it for now.

llvm-svn: 294447
2017-02-08 13:49:28 +00:00
Wolfgang Pieb 02f329370f DebugInfo: Track spilled variables in LiveDebugValues
When variables are spilled to the stack by the register allocator, keep track of their
debug locations in LiveDebugValues and insert DBG_VALUE instructions at the appropriate
place. Ensure that the locations are propagated down the dominator tree via the existing 
mechanisms.

Reviewer: aprantl

Differential Revision: https://reviews.llvm.org/D29500

llvm-svn: 294356
2017-02-07 21:23:15 +00:00
Paul Robinson 383c5c228f Merge DebugLoc on combined stores; in this case, when combining stores
from the end of two blocks, merge instead of arbitrarily picking one.

Differential Revision: http://reviews.llvm.org/D29504

llvm-svn: 294251
2017-02-06 22:19:04 +00:00
David Blaikie a0e3c75187 DebugInfo: ensure type and namespace names are included in pubnames/pubtypes even when they are only present in type units
While looking to add support for placing singular types (types that will
only be emitted in one place (such as attached to a strong vtable or
explicit template instantiation definition)) not in type units (since
type units have overhead) I stumbled across that change causing an
increase in pubtypes.

Turns out we were missing some types from type units if they were only
referenced from other type units and not from the debug_info section.

This fixes that, following GCC's line of describing the offset of such
entities as the CU die (since there's no compile unit-relative offset
that would describe such an entity - they aren't in the CU). Also like
GCC, this change prefers to describe the type stub within the CU rather
than the "just use the CU offset" fallback where possible. This may give
the DWARF consumer some opportunity to find the extra info in the type
stub - though I'm not sure GDB does anything with this currently.

The size of the pubnames/pubtypes sections now match exactly with or
without type units enabled.

This nearly triples (+189%) the pubtypes section for a clang self-host
and grows pubnames by 0.07% (without compression). For a total of 8%
increase in debug info sections of the objects of a Split DWARF build
when using type units.

llvm-svn: 293971
2017-02-03 00:44:18 +00:00
Rafael Espindola 6d60ca635a Relax test so that it passes on OS X.
llvm-svn: 293946
2017-02-02 22:08:25 +00:00
Rafael Espindola 13a79bbfe5 Change how we handle section symbols on ELF.
On ELF every section can have a corresponding section symbol. When in
an assembly file we have

.quad .text

the '.text' refers to that symbol.

The way we used to handle them is to leave .text an undefined symbol
until the very end when the object writer would map them to the
actual section symbol.

The problem with that is that anything before the end would see an
undefined symbol. This could result in bad diagnostics
(test/MC/AArch64/label-arithmetic-diags-elf.s), or incorrect results
when using the asm streamer (est/MC/Mips/expansion-jal-sym-pic.s).

Fixing this will also allow using the section symbol earlier for
setting sh_link of SHF_METADATA sections.

This patch includes a few hacks to avoid changing our behaviour when
handling conflicts between section symbols and other symbols. I
reported pr31850 to track that.

llvm-svn: 293936
2017-02-02 21:26:06 +00:00
Dehao Chen 1fdf3ce9cd Refactor the gmlt tests. (NFC)
llvm-svn: 293852
2017-02-02 01:21:13 +00:00
Paul Robinson 5362216c36 Remove an assertion that doesn't hold when mixing -g and -gmlt through
LTO.  Replace it with a related assertion, ensuring that abstract
variables appear only in abstract scopes.
Part of PR31437.

Differential Revision: http://reviews.llvm.org/D29430

llvm-svn: 293841
2017-02-01 23:51:56 +00:00
Dehao Chen 0e8a8d1209 Remove XFAIL for test/DebugInfo/Generic/gmlt_profiling.ll
Summary: test/DebugInfo/Generic/gmlt_profiling.ll will also pass on darwin, so we should remove the XFAIL in the test.

Reviewers: dblaikie, aprantl

Reviewed By: dblaikie

Subscribers: llvm-commits

Differential Revision: https://reviews.llvm.org/D29431

llvm-svn: 293840
2017-02-01 23:28:55 +00:00
Dehao Chen 0944a8c2ec Change debug-info-for-profiling from a TargetOption to a function attribute.
Summary: LTO requires the debug-info-for-profiling to be a function attribute.

Reviewers: echristo, mehdi_amini, dblaikie, probinson, aprantl

Reviewed By: mehdi_amini, dblaikie, aprantl

Subscribers: aprantl, probinson, ahatanak, llvm-commits, mehdi_amini

Differential Revision: https://reviews.llvm.org/D29203

llvm-svn: 293833
2017-02-01 22:45:09 +00:00
Paul Robinson a380e613f1 Remove an assertion that doesn't hold when mixing -g and -gmlt through
LTO.  Part of PR31437.

Differential Revision: http://reviews.llvm.org/D29310

llvm-svn: 293818
2017-02-01 21:54:50 +00:00
Daniel Sanders b96a945bf5 stripDebugInfo() should remove DILocation's found in !llvm.loop metadata
Summary:
Patch by Michele Scandale
(with a small tweak to 'CHECK-NOT' the last DILocation in the test)

Subscribers: bogner, llvm-commits

Differential Revision: https://reviews.llvm.org/D27980

llvm-svn: 293377
2017-01-28 11:22:05 +00:00
Zachary Turner 840dee30d3 [pdb] Fix failing test
llvm-svn: 293091
2017-01-25 21:21:02 +00:00
Zachary Turner 29da5db7a0 [pdb] Correctly parse the hash adjusters table from TPI stream.
This is not a list of pairs, it is a hash table data structure. We now
correctly parse this out and dump it from llvm-pdbdump.

We still need to understand the conditions that lead to a type
getting an entry in the hash adjuster table.  That will be done
in a followup investigation / patch.

Differential Revision: https://reviews.llvm.org/D29090

llvm-svn: 293090
2017-01-25 21:17:40 +00:00
Zachary Turner 760ad4da60 [pdb] Write the Named Stream mapping to Yaml and binary.
Differential Revision: https://reviews.llvm.org/D28919

llvm-svn: 292665
2017-01-20 22:42:09 +00:00
Petar Jovanovic dbb39356b4 [mips] Fix debug information for __thread variable
This patch fixes debug information for __thread variable on Mips
using .dtprelword and .dtpreldword directives.

Patch by Aleksandar Beserminji.

Differential Revision: http://reviews.llvm.org/D28770

llvm-svn: 292624
2017-01-20 17:53:30 +00:00
Dehao Chen 1ce8d6ca59 Add -debug-info-for-profiling to emit more debug info for sample pgo profile collection
Summary:
SamplePGO binaries built with -gmlt to collect profile. The current -gmlt debug info is limited, and we need some additional info:

* start line of all subprograms
* linkage name of all subprograms
* standalone subprograms (functions that has neither inlined nor been inlined)

This patch adds these information to the -gmlt binary. The impact on speccpu2006 binary size (size increase comparing with -g0 binary, also includes data for -g binary, which does not change with this patch):

               -gmlt(orig) -gmlt(patched) -g
433.milc       4.68%       5.40%          19.73%
444.namd       8.45%       8.93%          45.99%
447.dealII     97.43%      115.21%        374.89%
450.soplex     27.75%      31.88%         126.04%
453.povray     21.81%      26.16%         92.03%
470.lbm        0.60%       0.67%          1.96%
482.sphinx3    5.77%       6.47%          26.17%
400.perlbench  17.81%      19.43%         73.08%
401.bzip2      3.73%       3.92%          12.18%
403.gcc        31.75%      34.48%         122.75%
429.mcf        0.78%       0.88%          3.89%
445.gobmk      6.08%       7.92%          42.27%
456.hmmer      10.36%      11.25%         35.23%
458.sjeng      5.08%       5.42%          14.36%
462.libquantum 1.71%       1.96%          6.36%
464.h264ref    15.61%      16.56%         43.92%
471.omnetpp    11.93%      15.84%         60.09%
473.astar      3.11%       3.69%          14.18%
483.xalancbmk  56.29%      81.63%         353.22%
geomean        15.60%      18.30%         57.81%

Debug info size change for -gmlt binary with this patch:

433.milc       13.46%
444.namd       5.35%
447.dealII     18.21%
450.soplex     14.68%
453.povray     19.65%
470.lbm        6.03%
482.sphinx3    11.21%
400.perlbench  8.91%
401.bzip2      4.41%
403.gcc        8.56%
429.mcf        8.24%
445.gobmk      29.47%
456.hmmer      8.19%
458.sjeng      6.05%
462.libquantum 11.23%
464.h264ref    5.93%
471.omnetpp    31.89%
473.astar      16.20%
483.xalancbmk  44.62%
geomean        16.83%

Reviewers: davidxl, echristo, dblaikie

Reviewed By: echristo, dblaikie

Subscribers: aprantl, probinson, llvm-commits, mehdi_amini

Differential Revision: https://reviews.llvm.org/D25434

llvm-svn: 292457
2017-01-19 00:44:11 +00:00
Robert Lougher 426851e608 [DebugInfo] Handle same locations in DILocation::getMergedLocation
Revision 289661 introduced the function DILocation::getMergedLocation for
merging of debug locations. At the time is was simply a stub which always
returned no location. This patch modifies getMergedLocation to handle the
case where the two locations are the same or can't be discriminated.

Differential Revision: https://reviews.llvm.org/D28521

llvm-svn: 291809
2017-01-12 20:34:35 +00:00
Victor Leschuk 59d0b92a2a Correct object file for implicit const test
llvm-svn: 291601
2017-01-10 21:30:42 +00:00
Victor Leschuk cbddae74f5 DebugInfo: support for DW_FORM_implicit_const
Support for DW_FORM_implicit_const DWARFv5 feature.
When this form is used attribute value goes to .debug_abbrev section (as SLEB).
As this form would break any debug tool which doesn't support DWARFv5
it is guarded by dwarf version check. Attempt to use this form with
dwarf version <= 4 is considered a fatal error.

Differential Revision: https://reviews.llvm.org/D28456

llvm-svn: 291599
2017-01-10 21:18:26 +00:00
Wolfgang Pieb c17a279eda [DWARF] Null out the debug locs of (loop invariant) instructions hoisted by LICM in
order to avoid jumpy line tables. Calls are left alone because they may be inlined.

Differential Revision: https://reviews.llvm.org/D28390

llvm-svn: 291258
2017-01-06 18:38:57 +00:00
Robert Lougher 5bf0416f45 Reapply "[SimplifyCFG] In sinkLastInstruction correctly set debugloc of common inst"
This reapplies r289828 (reverted in r289833 as it broke the address sanitizer).  The
debugloc is now only set when the instruction is not a call, as this causes the
verifier to assert (the inliner requires an inlinable callsite to have a debug loc
if the caller and callee have debug info).

Original commit message:

Simplify CFG will try to sink the last instruction in a series of basic blocks,
creating a "common" instruction in the successor block (sinkLastInstruction).
When it does this, the debug location of the single instruction should be the
merged debug locations of the commoned instructions.

Original review: https://reviews.llvm.org/D27590

llvm-svn: 290973
2017-01-04 17:40:32 +00:00
Florian Hahn 5815f6c53c [framelowering] Skip dbg values when getting next/previous instruction.
Summary:
In mergeSPUpdates, debug values need to be ignored when getting the
previous element, otherwise debug data could have an impact on codegen.

In eliminateCallFramePseudoInstr, debug values after the erased element
could have an impact on codegen and should be skipped.

Closes PR31319 (https://llvm.org/bugs/show_bug.cgi?id=31319)

Reviewers: aprantl, MatzeB, mkuper

Subscribers: gbedwell, llvm-commits

Differential Revision: https://reviews.llvm.org/D27688

llvm-svn: 290955
2017-01-04 12:08:35 +00:00
Keno Fischer f7d84ee6ff Reapply "[CodeGen] Fix invalid DWARF info on Win64"
This reapplies rL289013 (reverted in rL289014) with the fixes identified
in D21731. Should hopefully pass the buildbots this time.

llvm-svn: 290809
2017-01-02 03:00:19 +00:00
Sanjoy Das 00d76a5754 [TBAAVerifier] Be stricter around verifying scalar nodes
This fixes the issue exposed in PR31393, where we weren't trying
sufficiently hard to diagnose bad TBAA metadata.

This does reduce the variety in the error messages we print out, but I
think the tradeoff of verifying more, simply and quickly overrules the
need for more helpful error messags here.

llvm-svn: 290713
2016-12-29 15:47:05 +00:00
Adrian Prantl 5542da4bbc Fix an assertion in DwarfExpression when emitting fragments in vector registers
When DwarfExpression is emitting a fragment that is located in a
register and that fragment is smaller than the register, and the
register must be composed from sub-registers (are you still with me?)
the last DW_OP_piece operation must not be larger than the size of the
fragment itself, since the last piece of the fragment could be smaller
than the last subregister that is being emitted.

rdar://problem/29779065

llvm-svn: 290324
2016-12-22 06:10:41 +00:00
Adrian Prantl 1eadba1c8c Renumber testcase metadata nodes after r290153.
This patch renumbers the metadata nodes in debug info testcases after
https://reviews.llvm.org/D26769. This is a separate patch because it
causes so much churn. This was implemented with a python script that
pipes the testcases through llvm-as - | llvm-dis - and then goes
through the original and new output side-by side to insert all
comments at a close-enough location.

Differential Revision: https://reviews.llvm.org/D27765

llvm-svn: 290292
2016-12-22 00:45:21 +00:00
Adrian Prantl bceaaa9643 [IR] Remove the DIExpression field from DIGlobalVariable.
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.

Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:

(1) The DIGlobalVariable should describe the source level variable,
    not how to get to its location.

(2) It makes it unsafe/hard to update the expressions when we call
    replaceExpression on the DIGLobalVariable.

(3) It makes it impossible to represent a global variable that is in
    more than one location (e.g., a variable with multiple
    DW_OP_LLVM_fragment-s).  We also moved away from attaching the
    DIExpression to DILocalVariable for the same reasons.

This reapplies r289902 with additional testcase upgrades and a change
to the Bitcode record for DIGlobalVariable, that makes upgrading the
old format unambiguous also for variables without DIExpressions.

<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769

llvm-svn: 290153
2016-12-20 02:09:43 +00:00
Paul Robinson 2dfb688214 Allow "line 0" to be the first explicit debug location in a function.
Feedback on r289468 from Adrian Prantl.

llvm-svn: 290012
2016-12-16 23:54:33 +00:00
Zachary Turner 46225b193f Resubmit "[CodeView] Hook CodeViewRecordIO for reading/writing symbols."
The original patch was broken due to some undefined behavior
as well as warnings that were triggering -Werror.

llvm-svn: 290000
2016-12-16 22:48:14 +00:00
Adrian Prantl 73ec065604 Revert "[IR] Remove the DIExpression field from DIGlobalVariable."
This reverts commit 289920 (again).
I forgot to implement a Bitcode upgrade for the case where a DIGlobalVariable
has not DIExpression. Unfortunately it is not possible to safely upgrade
these variables without adding a flag to the bitcode record indicating which
version they are.
My plan of record is to roll the planned follow-up patch that adds a
unit: field to DIGlobalVariable into this patch before recomitting.
This way we only need one Bitcode upgrade for both changes (with a
version flag in the bitcode record to safely distinguish the record
formats).

Sorry for the churn!

llvm-svn: 289982
2016-12-16 19:39:01 +00:00
Zachary Turner d0fffd1d14 Revert "[CodeView] Hook CodeViewRecordIO for reading/writing symbols."
This reverts commit r289978, which is failing due to some rebase/merge
issues.

llvm-svn: 289981
2016-12-16 19:25:23 +00:00
Zachary Turner a4e7dfbc16 [CodeView] Hook CodeViewRecordIO for reading/writing symbols.
This is the 3rd of 3 patches to get reading and writing of
CodeView symbol and type records to use a single codepath.

Differential Revision: https://reviews.llvm.org/D26427

llvm-svn: 289978
2016-12-16 19:20:35 +00:00
David Blaikie 7d4a5599da Revert "dwarfdump: Support/process relocations on a CU's abbrev_off"
Reverting because this breaks lld's gdb_index support - it's probably
double counting the abbrev relocation offset.

This reverts commit r289954.

llvm-svn: 289961
2016-12-16 17:10:17 +00:00
David Blaikie e9fda9f201 dwarfdump: Support/process relocations on a CU's abbrev_off
Input can be produced by ld -r, for example (a normal LLVM workflow
never hits this - LLVM only ever produces a single abbrev table in an
object (shared by multiple CUs), so the reloc's always 0, and when it's
linked together the relocation's resolved so it doesn't need to be
handled)

llvm-svn: 289954
2016-12-16 16:31:10 +00:00
Nico Weber c4d695e25b Speculatively revert r289925, see PR31407
llvm-svn: 289944
2016-12-16 14:02:28 +00:00
Ekaterina Romanova 25da8a9b53 Update .debug_line section version information to match DWARF version.
One more attempt to re-commit the patch r285355, which I had to revert in r285362, because some tests were failing (the reason is because the size of the line_table varied depending on the full file name).

In the past the compiler always emitted .debug_line version 2, though some opcodes from DWARF 3 (e.g. DW_LNS_set_prologue_end, DW_LNS_set_epilogue_begin or DW_LNS_set_isa) and from DWARF 4 could be emitted by the compiler.

This patch changes version information of .debug_line to exactly match the DWARF version. For .debug_line version 4, a new field maximum_operations_per_instruction is emitted.

Differential Revision: https://reviews.llvm.org/D16697

llvm-svn: 289925
2016-12-16 05:10:11 +00:00
Adrian Prantl 74a835cda0 [IR] Remove the DIExpression field from DIGlobalVariable.
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.

Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:

(1) The DIGlobalVariable should describe the source level variable,
    not how to get to its location.

(2) It makes it unsafe/hard to update the expressions when we call
    replaceExpression on the DIGLobalVariable.

(3) It makes it impossible to represent a global variable that is in
    more than one location (e.g., a variable with multiple
    DW_OP_LLVM_fragment-s).  We also moved away from attaching the
    DIExpression to DILocalVariable for the same reasons.

This reapplies r289902 with additional testcase upgrades.

<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769

llvm-svn: 289920
2016-12-16 04:25:54 +00:00
Adrian Prantl 03c6d31a3b Revert "[IR] Remove the DIExpression field from DIGlobalVariable."
This reverts commit 289902 while investigating bot berakage.

llvm-svn: 289906
2016-12-16 01:00:30 +00:00
Adrian Prantl ce13935776 [IR] Remove the DIExpression field from DIGlobalVariable.
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.

Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:

(1) The DIGlobalVariable should describe the source level variable,
    not how to get to its location.

(2) It makes it unsafe/hard to update the expressions when we call
    replaceExpression on the DIGLobalVariable.

(3) It makes it impossible to represent a global variable that is in
    more than one location (e.g., a variable with multiple
    DW_OP_LLVM_fragment-s).  We also moved away from attaching the
    DIExpression to DILocalVariable for the same reasons.

<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769

llvm-svn: 289902
2016-12-16 00:36:43 +00:00
David Blaikie 2e1626879e DebugInfo: Make a Generic test case actually generic (remove datalayout/triple)
llvm-svn: 289893
2016-12-15 23:39:25 +00:00
David Blaikie 3e3eb33ed7 DebugInfo: Emit ranges for functions with DISubprograms but lacking locations on any instructions
This seems more consistent, and helps tidy up/simplify some other code
in this change.

llvm-svn: 289889
2016-12-15 23:17:52 +00:00
Robert Lougher 6ea759a83e Revert "[SimplifyCFG] In sinkLastInstruction correctly set debugloc of common inst"
Reverting as it is causing buildbot failures (address sanitizer).

llvm-svn: 289833
2016-12-15 16:59:13 +00:00
Robert Lougher cf17674211 [SimplifyCFG] In sinkLastInstruction correctly set debugloc of "common" inst
Simplify CFG will try to sink the last instruction in a series of basic blocks,
creating a "common" instruction in the successor block (sinkLastInstruction).
When it does this, the debug location of the single instruction should be the
merged debug locations of the commoned instructions.

Differential Revision: https://reviews.llvm.org/D27590

llvm-svn: 289828
2016-12-15 16:17:53 +00:00
Robert Lougher cfd7198698 [InstCombine] Folding of a compare with RHS const should merge debug locations
If all the operands to a phi node are compares that have a RHS constant,
instcombine will try to pull them through the phi node, combining them into
a single operation. When it does this, the debug location of the new op
should be the merged debug locations of the phi node arguments.

Patch 8 of 8 for D26256.  Folding of a compare that has a RHS constant.

Differential Revision: https://reviews.llvm.org/D26256

llvm-svn: 289704
2016-12-14 20:27:22 +00:00
Robert Lougher c9f7354776 [InstCombine] Folding of a binop with RHS const should merge the debug locations
If all the operands to a phi node are a binop with a RHS constant, instcombine
will try to pull them through the phi node, combining them into a single
operation. When it does this, the debug location of the new op should be the
merged debug locations of the phi node arguments.

Patch 7 of 8 for D26256.  Folding of a binop with RHS constant.

Differential Revision: https://reviews.llvm.org/D26256

llvm-svn: 289699
2016-12-14 20:07:49 +00:00
Robert Lougher f02d9b8325 [InstCombine] When folding casts through a phi node merge the debug locations
If all the operands to a phi node are a cast, instcombine will try to pull
them through the phi node, combining them into a single cast. When it does
this, the debug location of the new cast should be the merged debug locations
of the phi node arguments.

Patch 6 of 8 for D26256.  Folding of a cast operation.

Differential Revision: https://reviews.llvm.org/D26256

llvm-svn: 289693
2016-12-14 19:24:01 +00:00
Robert Lougher 373e36a410 [InstCombine] Folding loads through a phi node should merge the debug locations
If all the operands to a phi node are a load, instcombine will try to pull
them through the phi node, combining them into a single load. When it does
this, the debug location of the new load should be the merged debug locations
of the phi node arguments.

Patch 5 of 8 for D26256.  Folding of a load operation.

Differential Revision: https://reviews.llvm.org/D26256

llvm-svn: 289688
2016-12-14 19:02:14 +00:00
Robert Lougher 8fc1e89bbb [InstCombine] When folding GEP through a phi node merge the debug locations
If all the operands to a phi node are getelementptr, instcombine
will try to pull them through the phi node, combining them into a single
operation.  When it does this, the debug location of the new getelementptr
should be the merged debug locations of the phi node arguments.

Patch 4 of 8 for D26256.  Folding of a getelementptr operation.

Differential Revision: https://reviews.llvm.org/D26256

llvm-svn: 289684
2016-12-14 18:37:50 +00:00