Summary:
r316368 broke this build when it introduced a reference to a pthread
function to the Utility module. This caused cmake to generate an
incorrect link line (wrong order of libs) because it did not see the
dependency from Utility to the system libraries. Instead these libraries
were being manually added to each final target.
This changes moves the dependency management from the individual targets
to the lldbUtility module, which is consistent with how llvm does it.
The final targets will pick up these libraries as they will be a part of
the link interface of the module.
Technically, some of these dependencies could go into the host module,
as that's where most of the os-specific code is, but I did not try to
investigate which ones.
Reviewers: zturner, sylvestre.ledru
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D39246
llvm-svn: 316997
The previous value was not sufficient for Pixel 2 phones. One would have
hoped that the newer phones are faster, but that does not seem to be the
case here.
llvm-svn: 316993
Summary:
This adds a data formatter for the implementation of forward_list in
libc++. I've refactored the existing std::list data formatter a bit to
enable more sharing of code (mainly the loop detection stuff).
Reviewers: jingham, EricWF
Subscribers: srhines, eugene, lldb-commits
Differential Revision: https://reviews.llvm.org/D35556
llvm-svn: 316992
Summary:
ArchSpec::SetTriple was taking a Platform as an argument, and used it to
fill in missing pieces of the specified triple. I invert the dependency
by moving this code to other classes. For this purpose, I've created
three new functions.
- HostInfo::GetAugmentedArchSpec: fills in the triple using the host
platform (this used to be implemented by passing a null platform
pointer). By putting this code in the Host module, we can provide a
way to anyone who does not have a platform instance (lldb-server) an
easy way to get Host data.
- Platform::GetAugmentedArchSpec: if you have a platform instance, you
can call this to let it fill in the triple.
- static Platform::GetAugmentedArchSpec: implements the "if platform ==
0 then use_host() else use_platform()" part.
Reviewers: zturner, jingham, clayborg
Subscribers: mgorny, javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D39387
llvm-svn: 316987
Versions of android before kitkat implemented pselect non-atomically,
which caused flakyness, as we were relying on it atomically setting the
signal mask to implement waiting for signals.
This patch implements a direct call to the the pselect kernel syscall,
which does not suffer from this problem. The code itself is not very
pretty, but fortunately the uglyness is contained in the
android version of the MainLoop::RunImpl::Poll function.
llvm-svn: 316915
UriParser::Parse is returning a StringRef pointing the the parsed
string, but we were calling it with a temporary string. Change this to a
local variable to make sure the string persists as long as we need it.
llvm-svn: 316740
Summary:
This matches other SysV ABIs that are different on Apple and non-Apple targets,
like `ABISysV_arm.cpp` for instance.
Reviewers: clayborg, emaste
Subscribers: aemerson, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D39335
llvm-svn: 316673
This creates a new Architecture plugin and moves the stop info override
callback to this place. The motivation for this is to remove complex
dependencies from the ArchSpec class because it is used in a lot of
places that (should) know nothing about Process instances and StopInfo
objects.
I also add a test for the functionality covered by the override
callback.
Differential Revision: https://reviews.llvm.org/D31172
llvm-svn: 316609
Summary:
We had a bug where if we had forked (in the ProcessLauncherPosixFork)
while another thread was writing a log message, we would deadlock. This
happened because the fork child inherited the locked log rwmutex, which
would never get unlocked. This meant the child got stuck trying to
disable all log channels.
The bug existed for a while but only started being apparent after
D37930, which started using ThreadLauncher (which uses logging) instead
of std::thread (which does not) for launching TaskPool threads.
The fix is to use pthread_atfork to disable logging in the forked child.
Reviewers: zturner, eugene, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D38938
llvm-svn: 316368
The pthread_atfork trick breaks on android, because
pthread_rwlock_unlock detects that it is not the same thread which
locked the lock. This means that the subsequent lock attempt will still
deadlock (only this time it happens deterministically instead of at
random). Reverting to find a better solution.
This reverts commit r316173.
llvm-svn: 316231
Summary:
We had a bug where if we had forked (in the ProcessLauncherPosixFork)
while another thread was writing a log message, we would deadlock. This
happened because the fork child inherited the locked log rwmutex, which
would never get unlocked. This meant the child got stuck trying to
disable all log channels.
The bug existed for a while but only started being apparent after
D37930, which started using ThreadLauncher (which uses logging) instead
of std::thread (which does not) for launching TaskPool threads.
The fix is to use pthread_atfork to make sure noone is writing a log
message while we are forking.
Reviewers: zturner, eugene, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D38938
llvm-svn: 316173
Summary:
The NativeThread class is useless without the containing process (and in
some places it is already assuming the process is always around). This
makes it clear that the NativeProcessProtocol is the object owning the
threads, and makes the destruction order deterministic (first threads,
then process). The NativeProcess is the only thing holding a thread
unique_ptr, and methods that used to hand out thread shared pointers now
return raw pointers or references.
Reviewers: krytarowski, eugene
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D35618
llvm-svn: 316007
This patch adds support for passing an arbitrary python stream
(anything inheriting from IOBase) to SetOutputFileHandle or
SetErrorFileHandle.
Differential revision: https://reviews.llvm.org/D38829
<rdar://problem/34870417>
llvm-svn: 315966
* Prevent dumping of characters in DumpDataExtractor() with
item_byte_size bigger than 8 bytes. This case is not supported by the
code and results in a crash because the code calls
DataExtractor::GetMaxU64Bitfield() -> GetMaxU64() that asserts for
byte size > 8 bytes.
* Teach DataExtractor::GetMaxU64(), GetMaxU32(), GetMaxS64() and
GetMaxU64_unchecked() how to handle byte sizes that are not a multiple
of 2. This allows DumpDataExtractor() to dump characters and booleans
with item_byte_size in the interval of [1, 8] bytes. Values that are
not a multiple of 2 would previously result in a crash because they
were not handled by GetMaxU64().
llvm-svn: 315444
Previously LLDB required the DWP file
to be located next to the executable file.
This diff uses the helper function
Symbols::LocateExecutableSymbolFile to search for
DWP files in the standard locations for debug symbols.
Test plan:
Build a toy test example:
main.cpp
clang -gsplit-dwarf -g -O0 main.cpp -o main.exe
llvm-dwp -e main.exe -o main.exe.dwp
mkdir -p debug_symbols
mv main.exe.dwp debug_symbols/main.exe.dwp
Run lldb:
lldb
settings set target.debug-file-search-paths ./debug_symbols
file ./main.exe
br set --name f
run
Check that debugging works:
setting breakpoints, printing local variables.
Differential revision: https://reviews.llvm.org/D38568
llvm-svn: 315387
This allows clients to avoid an unnecessary fs::status() call on each
directory entry. Because the information returned by FindFirstFileEx
is a subset of the information returned by a regular status() call,
I needed to extract a base class from file_status that contains only
that information.
On my machine, this reduces the time required to enumerate a ThinLTO
cache directory containing 520k files from almost 4 minutes to less
than 2 seconds.
Differential Revision: https://reviews.llvm.org/D38716
llvm-svn: 315378
Summary:
While the specification says that the 64bit registers are prefixed with
`x`, it seems that many people still use `r`. Until recently, we had been using
the `r` prefix instead of the `x` prefix in ds2. This caused lldb to fail during
unwinding. I think it's reasonable to check for a register prefixed with `r`,
since some people still choose to use `r`.
Reviewers: sas, fjricci, clayborg
Reviewed By: sas, clayborg
Subscribers: aemerson, javed.absar, kristof.beyls
Differential Revision: https://reviews.llvm.org/D38376
Change by Alex Langford <apl@fb.com>
llvm-svn: 315221
The core of this change is the new CommandInterpreter::m_command_state,
which models the state transitions for interactive commands, including
an "interrupted" state transition.
In general, command interruption requires cooperation from the code
executing the command, which needs to poll for interruption requests
through CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs
was likely the longest blocking part.
(ex. target modules dump symtab on a complex binary could take 10+ minutes)
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 315037
Add support for ppc64le to create breakpoints and read/write
general purpose registers.
Other features for ppc64le and functions to read/write
other registers are being implemented.
Patch by Alexandre Yukio Yamashita (alexandreyy)
Differential Revision: https://reviews.llvm.org/D38323
llvm-svn: 315008
SymbolFileDWARFDwp contains m_debug_cu_index_map which was previously
initialized incorrectly: before m_debug_cu_index.parse
is called m_debug_cu_index is empty, thus
the map was not actually getting populated properly.
This diff moves this step into a private helper method
and calls it after m_debug_cu_index.parse inside SymbolFileDWARFDwp::Create.
Test plan:
Build a toy test example
main.cpp
clang -gsplit-dwarf -g -O0 main.cpp -o main.exe
llvm-dwp -e main.exe -o main.exe.dwp
Build LLDB with ENABLE_DEBUG_PRINTF set.
Run: lldb -- ./main.exe
Check that the indexes are now correct
(before this change they were empty)
Check that debugging works
(setting breakpoints, printing local variables (this was not working before))
Differential revision: http://reviews.llvm.org/D38492
llvm-svn: 314832
FreeBSD kernel modules are actually relocatable (.o) ELF files and this
previously caused some issues for LLDB. This change addresses these when
using lldb to symbolicate FreeBSD kernel backtraces.
The major problems:
- Relocations were not being applied to the DWARF debug info despite
there being code to do this. Several issues prevented it from working:
- Relocations are computed at the same time as the symbol table, but
in the case of split debug files, symbol table parsing always
redirects to the primary object file, meaning that relocations would
never be applied in the debug file.
- There's actually no guarantee that the symbol table has been parsed
yet when trying to parse debug information.
- When actually applying relocations, it will segfault because the
object files are not mapped with MAP_PRIVATE and PROT_WRITE.
- LLDB returned invalid results when performing ordinary address-to-
symbol resolution. It turned out that the addresses specified in the
section headers were all 0, so LLDB believed all the sections had
overlapping "file addresses" and would sometimes return a symbol from
the wrong section.
Patch by Brian Koropoff
Differential Revision: https://reviews.llvm.org/D38142
llvm-svn: 314672
This setting can be enabled like this at the target level:
(lldb) settings set target.experimental.use-modern-type-lookup true
This causes several new behaviors in the Clang expression parser:
- It completely disables use of ClangASTImporter. None are created
at all, and all users of it are now conditionalized on its
presence.
- It instead constructs a per-expression ExternalASTMerger, which
exists inside Clang and contains much of the type completion
logic that hitherto lived in ExternalASTSource,
ClangExpressionDeclMap, and ClangASTImporter.
- The expression parser uses this Merger as a backend for copying
and completing types.
- It also constructs a persistent ExternalASTMerger which is
connected to the Target's persistent AST context.
This is a major chunk of LLDB functionality moved into Clang. It
can be tested in two ways:
1. For an individual debug session, enable the setting before
running a target.
2. For the testsuite, change the option to be default-true. This
is done in Target.cpp's g_experimental_properties. The
testsuite is not yet clean with this, so I have not committed
that switch.
I have filed a Bugzilla for extending the testsuite to allow
custom settings for all tests:
https://bugs.llvm.org/show_bug.cgi?id=34771
I have also filed a Bugzilla for fixing the remaining testsuite
failures with this setting enabled:
https://bugs.llvm.org/show_bug.cgi?id=34772
llvm-svn: 314458
stack pointer for apple's armv7 ABI. When in a frameless function
or in a prologue/epilogue where sp wasn't properly aligned, we could
try to make function calls with an unaligned sp; the expression
would crash.
llvm-svn: 314265
The IR dynamic checks are self-contained functions whose job is to
- verify that pointers referenced in an expression are valid at runtime; and
- verify that selectors sent to Objective-C objects by an expression are
actually supported by that object.
These dynamic checks forward-declare all the functions they use and should not
require any external debug information. The way they ensure this is by marking
all the names they use with a dollar sign ($). The expression parser recognizes
such symbols and perform no lookups for them.
This patch fixes three issues surrounding the use of the dollar sign:
- to fix a MIPS issue, the name of the pointer checker was changed from
starting with $ to starting with _$, but this was not properly ignored; and
- the Objective-C object checker used a temporary variable that did not start
with $.
- the Objective-C object checker used an externally-defined struct (struct
objc_selector) but didn't need to.
The patch also implements some cleanup in the area:
- it reformats the string containing the Objective-C object checker,
which was mangled horribly when the code was transformed to a uniform width
of 80 columns, and
- it factors out the logic for ignoring global $-symbols into common code
shared between ClangASTSource and ClangExpressionDeclMap.
Differential Revision: https://reviews.llvm.org/D38153
llvm-svn: 314225
Using TCP sockets is insecure against local attackers, and possibly
against remote attackers too (some vulnerabilities may allow tricking a
browser to make a request to localhost). Use socketpair (which is immune
to such attacks) on all Unix platforms.
Patch by Demi Marie Obenour < demiobenour@gmail.com >
Differential Revision: https://reviews.llvm.org/D33213
llvm-svn: 314127
Summary:
This is required to be able to step through calls to external functions
that are not properly marked with __declspec(dllimport). When a call
like this is emitted, the linker will inject a trampoline to produce an
indirect call through the IAT.
Reviewers: zturner, jingham
Reviewed By: jingham
Subscribers: sas, jingham, lldb-commits
Differential Revision: https://reviews.llvm.org/D22231
llvm-svn: 314045
The core of this change is the new CommandInterpreter::m_command_state, which
models the state transitions for interactive commands, including an
"interrupted" state transition.
In general, command interruption requires cooperation from the code executing
the command, which needs to poll for interruption requests through
CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs was
likely the longest blocking part. (ex. target modules dump symtab on a
complex binary could take 10+ minutes)
patch by lemo
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 313904
Pavel Labath