This fixes a couple of regressions on (probably not just) cayman
NOTE: This is a candidate for the Mesa stable branch.
Reviewed-by: Tom Stellard <thomas.stellard at amd.com>
llvm-svn: 175180
'R600/SI: Use proper instructions for array/shadow samplers.' removed two
cases from TEX_SHADOW. Vincent Lejeune reported on IRC that this broke some
shadow array piglit tests with the r600g driver. Reinstating the removed
cases should fix this, and still works with radeonsi as well.
I will follow up with some lit tests which would have caught the regression.
NOTE: This is a candidate for the Mesa stable branch.
Tested-by: Vincent Lejeune <vljn@ovi.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174963
The modifiers don't seem to have any effect with V_MOV_B32, supposedly it's
meant to just move bits untouched.
Fixes 46 piglit tests with radeonsi, though unfortunately 11 of those had
just regressed because they started using the clamp modifier.
NOTE: This is a candidate for the Mesa stable branch.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174890
This fixes a couple of bugs and incorrect assumptions,
in total four more piglit tests now pass.
v2: fix small bug in the dominator updating
Patch by: Christian König
Signed-off-by: Christian König <christian.koenig@amd.com>
llvm-svn: 174762
Patch by: Christian König
Intersecting loop handling was wrong.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 174761
Otherwise we sometimes produce invalid code.
Patch by: Christian König
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 174760
Remove all the unused code.
Patch by: Christian König
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174656
Allows nexuiz to run with radeonsi.
Patch by: Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174655
20 more little piglits with radeonsi.
Patch by: Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174654
The _SGPR variants where wrong.
Patch by: Christian König
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174653
v2: rebased on current upstream
Patch by: Christian König
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174652
This is for the case when no processor is passed to the backend. This
prevents the
'' is not a recognized processor for this target (ignoring processor)
warning from being generated by clang.
llvm-svn: 174651
Handle vectors of 1 to 16 integers.
Change the intrinsic names to prevent the wrong one from being selected at
runtime due to the overloading.
Patch By: Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174633
v1i32, v2i32, v8i32 and v16i32.
Only add VGPR register classes for integer vector types, to avoid attempts
copying from VGPR to SGPR registers, which is not possible.
Patch By: Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174632
Use sub0-15 everywhere.
Patch by: Michel Dänzerr
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 174610
These instructions compare two floating point values and return an
integer true (-1) or false (0) value.
When compiling code generated by the Mesa GLSL frontend, the SET*_DX10
instructions save us four instructions for most branch decisions that
use floating-point comparisons.
llvm-svn: 174609
Only implemented for R600 so far. SI is missing implementations of a
few callbacks used by the Indirect Addressing pass and needs code to
handle frame indices.
At the moment R600 only supports array sizes of 16 dwords or less.
Register packing of vector types is currently disabled, which means that a
vec4 is stored in T0_X, T1_X, T2_X, T3_X, rather than T0_XYZW. In order
to correctly pack registers in all cases, we will need to implement an
analysis pass for R600 that determines the correct vector width for each
array.
v2:
- Add support for i8 zext load from stack.
- Coding style fixes
v3:
- Don't reserve registers for indirect addressing when it isn't
being used.
- Fix bug caused by LLVM limiting the number of SubRegIndex
declarations.
v4:
- Fix 64-bit defines
llvm-svn: 174525
Something very strange is going on with the output registers in this
target. Its ISelLowering code is inserting dangling CopyToReg nodes,
hoping that those physregs won't get clobbered before the RETURN.
This patch adds the output registers as implicit uses on RETURN
instructions in the custom emission pass. I'd much prefer to have those
CopyToReg nodes glued to the RETURNs, but I don't see how.
llvm-svn: 174400
Use one intrinsic for all sorts of interpolation.
Use two separate unexpanded instructions to represent INTERP_XY and _ZW -
this will allow to eliminate one part if it's not used.
Track liveness of special interpolation regs instead of reserving them -
this will allow to reuse those regs, lowering reg pressure.
Patch By: Vadim Girlin
v2[Vincent Lejeune]: Rebased against current llvm master
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174394
Emitting the function name allows us to check for it in the FileCheck
tests so we can make sure FileCheck is checking the output of the
correct function.
llvm-svn: 174392
Fixes 37 piglit tests and allows e.g. FlightGear to run with radeonsi.
Patch by: Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 174391
This intrinsic is translated to ALLOC_EXPORT_WORD1_SWIZ, hence its
name. It is used to store vs/fs outputs
Patch by: Vincent Lejeune
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 173297
Remove Cxxx registers, add new special register - "ALU_CONST" and new
operand for each alu src - "sel". ALU_CONST is used to designate that the
new operand contains the value to override src.sel, src.kc_bank, src.chan
for constants in the driver.
Patch by: Vadim Girlin
Vincent Lejeune:
- Use pointers for constants
- Fold CONST_ADDRESS when possible
Tom Stellard:
- Give CONSTANT_BUFFER_0 its own address space
- Use integer types for constant loads
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 173222
Patch by: Michel Dänzer
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 173053
Patch by: Michel Dänzer
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 173052
Patch by: Michel Dänzer
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 173051
Some instructions like memory reads/writes are executed
asynchronously, so we need to insert S_WAITCNT instructions
to block before accessing their results. Previously we have
just inserted S_WAITCNT instructions after each async
instruction, this patch fixes this and adds a prober
insertion pass.
Patch by: Christian König
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Christian König <deathsimple@vodafone.de>
llvm-svn: 172846
We shouldn't insert KILL optimization if we don't have a
kill instruction at all.
Patch by: Christian König
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Christian König <deathsimple@vodafone.de>
llvm-svn: 172845
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
llvm-svn: 171366
utils/sort_includes.py script.
Most of these are updating the new R600 target and fixing up a few
regressions that have creeped in since the last time I sorted the
includes.
llvm-svn: 171362
Vincent Lejeune