This is not yet part of any C++ working draft, and so is controlled by the flag
-fchar8_t rather than a -std= flag. (The GCC implementation is controlled by a
flag with the same name.)
This implementation is experimental, and will be removed or revised
substantially to match the proposal as it makes its way through the C++
committee.
llvm-svn: 331244
When a '>>' token is split into two '>' tokens (in C++11 onwards), or (as an
extension) when we do the same for other tokens starting with a '>', we can't
just use a location pointing to the first '>' as the location of the split
token, because that would result in our miscomputing the length and spelling
for the token. As a consequence, for example, a refactoring replacing 'A<X>'
with something else would sometimes replace one character too many, and
similarly diagnostics highlighting a template-id source range would highlight
one character too many.
Fix this by creating an expansion range covering the first character of the
'>>' token, whose spelling is '>'. For this to work, we generalize the
expansion range of a macro FileID to be either a token range (the common case)
or a character range (used in this new case).
llvm-svn: 331155
LLVM_ON_WIN32 is set exactly with MSVC and MinGW (but not Cygwin) in
HandleLLVMOptions.cmake, which is where _WIN32 defined too. Just use the
default macro instead of a reinvented one.
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
No intended behavior change.
llvm-svn: 331069
Summary:
The example that was broken before (^ designates completion points):
class Foo {
Foo() : fie^ld^() {} // no completions were provided here.
int field;
};
To fix it we don't cut off lexing after an identifier followed by code
completion token is lexed. Instead we skip the rest of identifier and
continue lexing.
This is consistent with behavior of completion when completion token is
right before the identifier.
Reviewers: sammccall, aaron.ballman, bkramer, sepavloff, arphaman, rsmith
Reviewed By: aaron.ballman
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D44932
llvm-svn: 330833
Summary:
Make completion behave consistently no matter if it is run at the
start, in the middle or at the end of an identifier that happens to
be a keyword or a macro name. Since completion is often ran on
incomplete identifiers, they may turn into keywords by accident.
For example, we should produce same results for all of these
completion points:
// ^ is completion point.
^class
cla^ss
class^
Previously clang produced different results for the last case (as if
the completion point was after a space: `class ^`).
This change also updates some offsets in tests that (unintentionally?)
relied on the old behavior.
Reviewers: sammccall, bkramer, arphaman, aaron.ballman
Reviewed By: sammccall
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D45887
llvm-svn: 330717
Right now we only use this information in one place, immediately after
we calculate it, but it's still nice information to have. The Swift
project is going to use this to tidy up its "API notes" feature (see
past discussion on cfe-dev that never quite converged).
Reviewed by Bruno Cardoso Lopes.
llvm-svn: 330452
This fixes issues with "class" being reported as an identifier in "enum class" because the construct is not present when using default language options.
Patch by Johann Klähn.
llvm-svn: 330159
framework module SomeKitCore {
...
export_as SomeKit
}
Given the module above, while generting autolink information during
codegen, clang should to emit '-framework SomeKitCore' only if SomeKit
was not imported in the relevant TU, otherwise it should use '-framework
SomeKit' instead.
rdar://problem/38269782
llvm-svn: 330152
The current support of the feature produces only 2 lines in report:
-Some general Code Generation Time;
-Total time of Backend Consumer actions.
This patch extends Clang time report with new lines related to Preprocessor, Include Filea Search, Parsing, etc.
Differential Revision: https://reviews.llvm.org/D43578
llvm-svn: 329684
Found via codespell -q 3 -I ../clang-whitelist.txt
Where whitelist consists of:
archtype
cas
classs
checkk
compres
definit
frome
iff
inteval
ith
lod
methode
nd
optin
ot
pres
statics
te
thru
Patch by luzpaz! (This is a subset of D44188 that applies cleanly with a few
files that have dubious fixes reverted.)
Differential revision: https://reviews.llvm.org/D44188
llvm-svn: 329399
Summary:
Add support for the -fsanitize=shadow-call-stack flag which causes clang
to add ShadowCallStack attribute to functions compiled with that flag
enabled.
Reviewers: pcc, kcc
Reviewed By: pcc, kcc
Subscribers: cryptoad, cfe-commits, kcc
Differential Revision: https://reviews.llvm.org/D44801
llvm-svn: 329122
The diagnostic system for Clang can already handle many AST nodes. Instead
of converting them to strings first, just hand the AST node directly to
the diagnostic system and let it handle the output. Minor changes in some
diagnostic output.
llvm-svn: 328688
Summary:
Libc++'s default allocator uses `__builtin_operator_new` and `__builtin_operator_delete` in order to allow the calls to new/delete to be ellided. However, libc++ now needs to support over-aligned types in the default allocator. In order to support this without disabling the existing optimization Clang needs to support calling the aligned new overloads from the builtins.
See llvm.org/PR22634 for more information about the libc++ bug.
This patch changes `__builtin_operator_new`/`__builtin_operator_delete` to call any usual `operator new`/`operator delete` function. It does this by performing overload resolution with the arguments passed to the builtin to determine which allocation function to call. If the selected function is not a usual allocation function a diagnostic is issued.
One open issue is if the `align_val_t` overloads should be considered "usual" when `LangOpts::AlignedAllocation` is disabled.
In order to allow libc++ to detect this new behavior the value for `__has_builtin(__builtin_operator_new)` has been updated to `201802`.
Reviewers: rsmith, majnemer, aaron.ballman, erik.pilkington, bogner, ahatanak
Reviewed By: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D43047
llvm-svn: 328134
When skipping building the module for a private framework module,
LangOpts.CurrentModule isn't enough for implict modules builds; for
instance, in case a private module is built while building a public one,
LangOpts.CurrentModule doesn't reflect the -fmodule-name being passed
down, but instead the module name which triggered the build.
Store the actual -fmodule-name in LangOpts.ModuleName and actually
check a name was provided during compiler invocation in order to
skip building the private module.
rdar://problem/38434694
llvm-svn: 328053
ARC mode.
Declaring __strong pointer fields in structs was not allowed in
Objective-C ARC until now because that would make the struct non-trivial
to default-initialize, copy/move, and destroy, which is not something C
was designed to do. This patch lifts that restriction.
Special functions for non-trivial C structs are synthesized that are
needed to default-initialize, copy/move, and destroy the structs and
manage the ownership of the objects the __strong pointer fields point
to. Non-trivial structs passed to functions are destructed in the callee
function.
rdar://problem/33599681
Differential Revision: https://reviews.llvm.org/D41228
llvm-svn: 326307
This patch removes the HashString function from StringExtraces and
replaces its uses with calls to djbHash from DJB.h.
This change is *almost* NFC. While the algorithm is identical, the
djbHash implementation in StringExtras used 0 as its default seed while
the implementation in DJB uses 5381. The latter has been shown to result
in less collisions and improved avalanching and is used by the DWARF
accelerator tables.
Because some test were implicitly relying on the hash order, I've
reverted to using zero as a seed for the following two files:
lld/include/lld/Core/SymbolTable.h
llvm/lib/Support/StringMap.cpp
Differential revision: https://reviews.llvm.org/D43615
llvm-svn: 326091
It looks like some of our tests depend on the ordering of hashed values.
I'm reverting my changes while I try to reproduce and fix this locally.
Failing builds:
lab.llvm.org:8011/builders/lld-x86_64-darwin13/builds/18388
lab.llvm.org:8011/builders/clang-cmake-x86_64-sde-avx512-linux/builds/6743
lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast/builds/15607
llvm-svn: 326082
This removes the HashString function from StringExtraces and replaces
its uses with calls to djbHash from DJB.h
This is *almost* NFC. While the algorithm is identical, the djbHash
implementation in StringExtras used 0 as its seed while the
implementation in DJB uses 5381. The latter has been shown to result in
less collisions and improved avalanching.
https://reviews.llvm.org/D43615
(cherry picked from commit 77f7f965bc9499a9ae768a296ca5a1f7347d1d2c)
llvm-svn: 326081
All use declarations need to be directly placed in the top-level module
anyway, knowing the submodule doesn't really help. The header that has
the offending #include can easily be seen in the diagnostics source
location.
Review: https://reviews.llvm.org/D43673
llvm-svn: 326023
If the value returned by `malloc`, `calloc` or `realloc` is not checked
for null pointer, this change replaces them for `safe_malloc`,
`safe_calloc` or `safe_realloc`, which are defined in the namespace `llvm`.
These function report fatal error on out of memory.
In the plain C files, assertion statements are added to ensure that memory
is successfully allocated.
The aim of this change is to get better diagnostics of OOM on Windows.
Differential Revision: https://reviews.llvm.org/D43017
llvm-svn: 325661
Assume Foo.framework with two module maps and two modules Foo and
Foo_Private.
Framework authors need to skip building both Foo and Foo_Private when
using -fmodule-name=Foo, since both are part of the framework and used
interchangeably during compilation.
rdar://problem/37500098
llvm-svn: 325305
diagnostic settings using _Pragma within a macro.
The AST writer had previously been assuming that all diagnostic state
transitions would occur within a FileID corresponding to a file. When a
diagnostic state change occured within a macro, it was unable to form a
location for that state change and would instead corrupt the diagnostic state
of the "root" node (and thus that of the main compilation).
Also introduce a "#pragma clang __debug diag_mapping" debugging utility
that I added to track this issue down.
llvm-svn: 324695
For input `0'e+1` lexer tokenized as numeric constant only `0'e`. Later
NumericLiteralParser skipped 0 and ' as digits and parsed `e+1` as valid
exponent going past the end of the token. Because it didn't mark numeric
literal as having an error, it continued parsing and tried to expandUCNs
with StringRef of length -2.
The fix is not to parse exponent when we reached the end of token.
Discovered by OSS-Fuzz:
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=4588
rdar://problem/36076719
Reviewers: rsmith, t.p.northover
Reviewed By: rsmith
Subscribers: cfe-commits, jkorous-apple
Differential Revision: https://reviews.llvm.org/D41834
llvm-svn: 324419
Summary:
Both MS and PS4 targets are capable of recognizing the
existence of: #pragma region, #pragma endregion.
Since this pragma is only a hint for certain editors, and has no logic,
it seems helpful to permit this pragma in all cases, not just MS compatibility mode.
Reviewers: rnk, rsmith, majnemer
Reviewed By: majnemer
Subscribers: Quuxplusone, probinson, majnemer, cfe-commits
Differential Revision: https://reviews.llvm.org/D42248
llvm-svn: 323577
Summary:
This patch removes IdentifierInfo from completion token after remembering
the identifier in the preprocessor.
Prior to this patch, completion token had the IdentifierInfo set to null when
completing at the start of identifier and to the II for completion prefix
when in the middle of identifier.
This patch unifies how code completion token is handled when it is insterted
before the identifier and in the middle of the identifier.
The actual IdentifierInfo can still be obtained from the Preprocessor.
Reviewers: bkramer, arphaman
Reviewed By: bkramer
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D42241
llvm-svn: 323133
This fixes PR32732 by updating CurLexerKind to reflect available lexers.
We were hitting null pointer in Preprocessor::Lex because CurLexerKind
was CLK_Lexer but CurLexer was null. And we set it to null in
Preprocessor::HandleEndOfFile when exiting a file with code completion
point.
To reproduce the crash it is important for a comment to be inside a
class specifier. In this case in Parser::ParseClassSpecifier we improve
error recovery by pushing a semicolon token back into the preprocessor
and later on try to lex a token because we haven't reached the end of
file.
Also clang crashes only on code completion in included file, i.e. when
IncludeMacroStack is not empty. Though we reset CurLexer even if include
stack is empty. The difference is that during pushing back a semicolon
token, preprocessor calls EnterCachingLexMode which decides it is
already in caching mode because various lexers are null and
IncludeMacroStack is not empty. As the result, CurLexerKind remains
CLK_Lexer instead of updating to CLK_CachingLexer.
rdar://problem/34787685
Reviewers: akyrtzi, doug.gregor, arphaman
Reviewed By: arphaman
Subscribers: cfe-commits, kfunk, arphaman, nemanjai, kbarton
Differential Revision: https://reviews.llvm.org/D41688
llvm-svn: 323008
The skipped preprocessor ranges are now serialized in the AST PCH file. This fixes, for example, libclang's clang_getSkippedRanges() returning zero ranges after reparsing a translation unit.
Differential Revision: https://reviews.llvm.org/D20124
llvm-svn: 322503
Fix makes the loop in LexAngledStringLiteral more like the loops in
LexStringLiteral, LexCharConstant. When we skip a character after
backslash, we need to check if we reached the end of the file instead of
reading the next character unconditionally.
Discovered by OSS-Fuzz:
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=3832
rdar://problem/35572754
Reviewers: arphaman, kcc, rsmith, dexonsmith
Reviewed By: rsmith, dexonsmith
Subscribers: cfe-commits, rsmith, dexonsmith
Differential Revision: https://reviews.llvm.org/D41423
llvm-svn: 322390
Summary:
#pragma STDC FP_CONTRACT handler is only registered in parser so we
should keep the unknown STDC pragma through preprocessor and we also
should not emit warning for unknown STDC pragma during preprocessor.
rdar://problem/35724351
Reviewers: efriedma, rsmith, arphaman
Reviewed By: efriedma
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D41780
llvm-svn: 321909
This is a follow up to r321855, closing the gap between our internal shadow
modules implementation and upstream. It has been tested for longer and
provides a better approach for tracking shadow modules. Mostly NFCI.
rdar://problem/23612102
llvm-svn: 321906
When modules come from module map files explicitly specified by
-fmodule-map-file= arguments, allow those to override/shadow modules
with the same name that are found implicitly by header search. If such a
module is looked up by name (e.g. @import), we will always find the one
from -fmodule-map-file. If we try to use a shadowed module by including
one of its headers report an error.
This enables developers to force use of a specific copy of their module
to be used if there are multiple copies that would otherwise be visible,
for example if they develop modules that are installed in the default
search paths.
Patch originally by Ben Langmuir,
http://lists.llvm.org/pipermail/cfe-commits/Week-of-Mon-20151116/143425.html
Based on cfe-dev discussion:
http://lists.llvm.org/pipermail/cfe-dev/2015-November/046164.html
Differential Revision: https://reviews.llvm.org/D31269
rdar://problem/23612102
llvm-svn: 321855
When modules come from module map files explicitly specified by
-fmodule-map-file= arguments, allow those to override/shadow modules
with the same name that are found implicitly by header search. If such a
module is looked up by name (e.g. @import), we will always find the one
from -fmodule-map-file. If we try to use a shadowed module by including
one of its headers report an error.
This enables developers to force use of a specific copy of their module
to be used if there are multiple copies that would otherwise be visible,
for example if they develop modules that are installed in the default
search paths.
Patch originally by Ben Langmuir,
http://lists.llvm.org/pipermail/cfe-commits/Week-of-Mon-20151116/143425.html
Based on cfe-dev discussion:
http://lists.llvm.org/pipermail/cfe-dev/2015-November/046164.html
Differential Revision: https://reviews.llvm.org/D31269
rdar://problem/23612102
llvm-svn: 321781
We used to advertise private modules to be declared as submodules
(Foo.Private). This has proven to not scale well since private headers
might carry several dependencies, introducing unwanted content into the
main module and often causing dep cycles.
Change the canonical way to name it to Foo_Private, forcing private
modules as top level ones, and provide warnings under -Wprivate-module
to suggest fixes for other private naming. Update documentation to
reflect that.
rdar://problem/31173501
llvm-svn: 321337
Summary:
llvm has grown a WritableMemoryBuffer class, which is convertible
(inherits from) a MemoryBuffer. We can use it to avoid conts_casting the
buffer contents when we want to write to it.
Reviewers: dblaikie, rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D41387
llvm-svn: 321167
This ensures that when compiling for "arm64" __is_target_arch will succeed for
both "arm64" and "aarch64".
Thanks to Bob Wilson who pointed this out!
llvm-svn: 320853
builtin macros
This patch implements the __is_target_arch, __is_target_vendor, __is_target_os,
and __is_target_environment Clang preprocessor extensions that were proposed by
@compnerd in Bob's cfe-dev post:
http://lists.llvm.org/pipermail/cfe-dev/2017-November/056166.html.
These macros can be used to examine the components of the target triple at
compile time. A has_builtin(is_target_???) preprocessor check can be used to
check for their availability.
__is_target_arch allows you to check if an arch is specified without worring
about a specific subarch, e.g.
__is_target_arch(arm) returns 1 for the target arch "armv7"
__is_target_arch(armv7) returns 1 for the target arch "armv7"
__is_target_arch(armv6) returns 0 for the target arch "armv7"
__is_target_vendor and __is_target_environment match the specific vendor
or environment. __is_target_os matches the specific OS, but
__is_target_os(darwin) will match any Darwin-based OS. "Unknown" can be used
to test if the triple's component is specified.
rdar://35753116
Differential Revision: https://reviews.llvm.org/D41087
llvm-svn: 320734
Specifically, warn if:
* we find a character that the language standard says we must treat as an
identifier, and
* that character is not reasonably an identifier character (it's a punctuation
character or similar), and
* it renders identically to a valid non-identifier character in common
fixed-width fonts.
Some tools "helpfully" substitute the surprising characters for the expected
characters, and replacing semicolons with Greek question marks is a common
"prank".
llvm-svn: 320697
This behaves similar to the __has_cpp_attribute builtin macro in that it allows users to detect whether an attribute is supported with the [[]] spelling syntax, which can be enabled in C with -fdouble-square-bracket-attributes.
llvm-svn: 320088
Richard Smith